A. If you have a Periodic Table that is NOT color-coded describe where to look on the periodic table to to find elements which have similar chemical properties.

B. Explain why they have similar chemical properties.

C. Name three elements that have those similarities.

(I need a written paragraph please)

Answer:

it's option no A as described in the image

Answer:

3 Ca

3 S

12 O

Explanation:

You have 3 moles of Ca(SO4)

Therefore you multiply the subscript of each atom of the compound by 3.

Ca and S have a understood subscript of 1 so there are three of each.

There are 4 oxygen atoms in one mole of CaSO4 so in 3 moles there would be 4*3 so 12

nitric acid (HNO3) is classified as a strong acid in water, which means that it dissociates completely in water to produce hydrogen ions (H+) and nitrate ions (NO3-).

This is in contrast to weak acids, which only partially dissociate in water. Strong acids have a very low pH (typically less than 1) and are highly corrosive, making them useful for many industrial applications such as making fertilizers, explosives, and dyes. However, they can also be dangerous and must be handled with care. A strong acid is an acid that fully dissociates or ionizes in water, meaning it releases all of its hydrogen ions (H+) into solution. This makes the acid highly acidic and gives it a low pH (typically less than 1). Some examples of strong acids include hydrochloric acid (HCl), sulfuric acid (H2SO4), nitric acid (HNO3), and perchloric acid (HClO4). Strong acids are highly reactive and can cause chemical burns and other damage if not handled properly. \

Learn more about strong acid here:

https://brainly.com/question/12811944

#SPJ4

As stated in the preceding statement [Zn²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰, [Fe3+] = 1s²2s²2p⁶3s²3p⁶3d⁵, [Fe²⁺] = 1s²2s²2p⁶3s²3p⁶3d⁶, [Cd²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰

Denotes to a basic material that isn't divided into smaller components or transformed into another chemical in chemistry. An atom, which is made up of protons, neutrons, and particles, is really the fundamental unit of an element. An element's atoms all equal the number of protons.

Dietary supplements include Zn²⁺ ions:

[Zn²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰

Mineral water contains Fe³⁺ cations:

[Fe3+] = 1s²2s²2p⁶3s²3p⁶3d⁵

Food supplements may include Fe²⁺ cations:

[Fe²⁺] = 1s²2s²2p⁶3s²3p⁶3d⁶

Paints had Cd²⁺ ions in them:

[Cd²⁺] = 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰

To know more about Elements visit:

https://brainly.com/question/28376204

#SPJ4

The complete question is-

Read the labels of several commercial products and identify monatomic ions of at least four transition elements contained in the products.  Write the complete electron configuration of these cations.  Make sure to clearly identify which monatomic ions is found in which commercial product.

The original pressure was 1000 mmHg.

Pressure is a force applied to a surface or object over a given area. Pressure can be generated in a variety of ways, including through mechanical force, electrical force, or through changes in temperature or chemical reactions. Pressure can be measured using a variety of devices, including a barometer, manometer, or gauge. Pressure is an important concept in many fields such as physics, engineering, chemistry, and medicine. It can be used to measure the force of a liquid or gas, the pressure of a liquid or gas, or the pressure at a certain depth in the ocean.

To learn more about pressure
https://brainly.com/question/25736513
#SPJ4

The leftovers of [tex]C_2H_2[/tex] will be 6 moles while the leftover of [tex]O_2[/tex] will be zero.

In the originally balanced equation of the reaction, 2 moles of [tex]C_2H_2[/tex] and 5 moles of [tex]O_2[/tex] react completely to produce 4 moles of [tex]CO_2[/tex] and 2 moles of [tex]H_2O[/tex]. This equation is balanced with no reactant left.

Now, 8 moles of [tex]C_2H_2[/tex] were made to react with 5 moles of [tex]O_2[/tex] in the second reaction. The mole ratio of the two reactants for complete reactions is 2:5. Thus, [tex]C_2H_2[/tex] has been supplied in excess.

Since only 5 moles of [tex]O_2[/tex] is available, only 2 moles of [tex]C_2H_2[/tex] will be consumed. Thus, 6 moles of [tex]C_2H_2[/tex] will be left while the oxygen will be completely consumed. That is, the amount of [tex]O_2[/tex] left would be zero.

More on mole ratio of reactants can be found here: https://brainly.com/question/15288923

#SPJ1

Looking at the images that we have, we can see that there is a reaction in the images A and C.

We would need to settle in our minds what is implied when we talk about a chemical reaction. You have to know that if we are talking about a chemical reaction then we are talking about the kiondfs of reaction that would lead to the following observations;

1) There is a change in the temperature of the system

2) There is an effervescence of gas in the system

3) There is a change in color

4) There is the appearance of a solid in the system

We would now have to look at all the setups that we have here and we have to look at it in such a way that we could know if there is a reaction that is going on in any of them as shown.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Water is called a ‘universal solvent' because water can dissolve much more substances than any other liquid found in nature but water cannot dissolve every substance.

Water is referred to as a "universal solvent" because it has a considerably wider range of natural solvent properties than any other liquid. However, water is not capable of dissolving all compounds.

For instance, water cannot dissolve hydroxides, fats, or waxes because oppositely charged particles are not very soluble in water. Hydrogen and oxygen atoms are arranged polarly in water molecules.

The oxygen atom has a negative charge, while the hydrogen atom on one side has a positive charge.The water molecule can more easily attach to various compounds thanks to these charges.

To learn more about universal solvent refer to:

https://brainly.com/question/1834245

#SPJ1

Because it can dissolve a greater variety of chemicals than any other natural liquid, water is referred to as a "universal solvent," though it does not dissolve all substances. The option  C is true.

In comparison to other liquids, water has a much larger spectrum of natural solvent qualities, earning it the moniker "universal solvent". Nevertheless, not all substances can be dissolved by water.

Because water is not highly soluble in oppositely charged particles, it cannot dissolve hydroxides, fats, or waxes, for example. Water molecules have polar arrangements of the hydrogen and oxygen atoms.

In contrast to the hydrogen atom on one side, which has a positive charge, the oxygen atom has a negative charge.

These charges allow the water molecule to more readily bind to different substances.

For more information about universal solvent kindly visit to brainly.com/question/1834245

#SPJ1

Andrea Ghez's favorite star is known as SO-2 and it is her favorite star because this star goes around the universe in a short period. I do not have a favorite star because I do not know a lot about stars.

Andrea Ghez is female astrophysicst who was born in the United States known for being one of the few women in the world who have gotten the Nobel Prize in Physics. During her life, Andrea has studied the center of the universe, black holes and the stars. Moreover, she was known for giving a TED talk in whiich she explained about stars and black holes.

In the TED talk given by Andrea Ghez she mentions her favorite star is the  SO-2 as "it goes around in only 15 years".

I do not have a favorite star because I do not know a lot about stars, although I believe studying them is very interesting.

Note: This question is incomplete; here is the missin information:

TED Talk- Andrea Ghez

"Now, most astronomers have a favorite star, and mine today is a star that's labeled up there, SO-2. Absolutely my favorite star in the world. And that's because it goes around in only 15 years. And to give you a sense of how short that is, the sun takes 200 million years to go around the center of the galaxy"

Learn more about stars in: https://brainly.com/question/7379319

#SPJ1

the product (s) formed by heating the following compounds in basic ethanol: EtOH and NaOEt is shown in the image.The reaction product is simpler because it is determined by the condition of the reagent and the catalyst or solvent.

there are many factors that determine the product as given. When alcoholic beverages (beer, wine, and spirits) are diluted, ethanol is present. It is used topically to prevent skin infections, in pharmaceutical preparations (such as rubbing compounds, lotions, tonics, and colognes), cosmetics, and perfumes. Ethanol, also referred to as ethyl alcohol, is a colourless, flammable liquid with a strong odour. It is the alcohol found in alcoholic beverages and employed as a solvent that is generated by fermentation. Alcohols are organic molecules made up of carbon, oxygen, and hydrogen atoms. When two carbons are present, the alcohol is referred to as ethanol (also known as ethyl alcohol).

Learn more about ethanol here:

https://brainly.com/question/25002448

#SPJ4

At an altitude of 18,000 feet, where the atmospheric pressure is 0.5 atm, the pressure is 7.5 pounds per square inch.

One square inch of any surface has 15 pounds of air sitting on top of it at sea level. That same square inch is only under 7.5 pounds per square inch of pressure at 18,000 feet.

The atmospheric pressure rises with increasing altitude. Contrary to popular belief, the graph shows that pressure decreases as altitude rises (moving to the right on the graph).

At sea level, the atmospheric pressure is 14 pounds per square inch. If we assume that the altitude is zero, we can see that the pressure is equal to 14 pounds per square inch. The atmospheric pressure rises as the altitude gets closer to sea level.

We observe that the pressure value rises as the altitude gets closer to sea level. As the altitude rises, the atmospheric pressure approaches 14 pounds per square foot. Only when the elevation is 0 miles above sea level does the pressure equal 14 pounds per square inch.

The pressure will therefore be 7.5 pounds per square inch if the air pressure in the atmosphere measures at 18,000 feet or 0.5 atm.

To know more about air pressure visit:

https://brainly.com/question/21656406

#SPJ4

Answer:

Na, Cu, and Br will form positive ions

Explanation:

Na, Cu, and Br have more protons than electrons, so they will form positive ions.

Na, Cu, and Br are all elements that have an atomic number greater than their number of electrons. This means that they have more protons than electrons, so they will form positive ions when they react with other elements. Na will form Na+, Cu will form Cu+ and Br will form Br+.

Answer:

Approx. 20 moles of iron.

Explanation:

There are approx.

6.022

×

10

23

iron atoms per mole of ion. This quantity, this number of iron atoms has a mass of

55.85⋅g . And of course, when we quote the mass of iron we say

55.85⋅g⋅mol−1 .

ΔS∘ for Ti(s)+2Cl2(g)→TiCl4(g) is 659.6J/mol.. It is important to note that, as a general rule, a positive ΔS° indicates an increase in disorder and a negative ΔS° indicates a decrease in disorder.

The change in entropy (ΔS) for a chemical reaction can be calculated using the standard entropies (S°) of the reactants and products.

ΔS° = S°(products) - S°(reactants). For the reaction Ti(s) + 2Cl2(g) → TiCl4(g)S° of Ti(s) = 29.1 J/mol·K, S° of Cl2(g) = 223.1 J/mol·K, S° of TiCl4(g) = 167.4 J/mol·K. Therefore, ΔS° = (S°(TiCl4) + 2S°(Cl2)) - S°(Ti)ΔS° = (167.4 + 2*223.1) - 29.1 = 659.6 J/mol·K. So the ΔS∘ for Ti(s) + 2Cl2(g) → TiCl4(g) is 659.6 J/mol·K with four significant figures. It is important to note that, as a general rule, a positive ΔS° indicates an increase in disorder and a negative ΔS° indicates a decrease in disorder. So in this case, the process of going from solid titanium and gaseous chlorine to gaseous titanium tetrachloride increases disorder, which is consistent with a positive ΔS°.

To learn more about ΔS here:

https://brainly.com/question/3784176

#SPJ4

A 16. 81 gram sample of an organic compound containing C, H and O is analyzed by combustion analysis and 21. 33 grams of CO₂ and 5. 822 grams of H₂O are produced. In a separate experiment, the molar mass is found to be 104. 1 g/mol.  The empirical formula is CH₃   and molecular formula is C₇H₇O₂₁

The empirical formula can be calculate as follows:

The reaction can be write

CxHyOz  → CO₂ + H₂O

As a result, we may state that there are two O-atoms for every one C-atom (12g) in CO2 (32g).

This indicates that the ratio is 12g C/32g O.

The molar mass of CO₂ is 44 g/mole.

(12/44) x 33 = 9 g

There are 9 grams of carbon in every 33 grams of CO₂

The same can be done for water:

In H₂O, each element is represented by two H atoms and one O atom. 2 g H and 16 g O.

[2 g H / 18 g H2O] are present in 5. 822 g of water

(2/18)x 5.822= 0.6468 g

The initial sample had 14.16 g of sample, 9 g of C, and 0.6468 g of H, which resulted in 34.3532g of oxygen.

Determine the amount of moles.

C: 9.0 g / 12.0 g/mol = 0.75 mol

H: 0.6468 g / 1.0 g/mol = 0.6468 mol

O: 34.3532g / 16.0 g/mol =  2.14 mol

Then we divide by the smallest number

C: 0.75 mol / 0.6468 mol = 1

H: 0.6468 mol / 0.6468 mol= 1

O:  2.14 mol/ 0.6468 mol =  3

so the empirical formula will be CH₃

Determine the molecular formula

mass molecular formula / mass of empirical formula = n

We have to multiply the empirical formula by n to get the molecular formula.

104.1 /15 = 7= n

This means the  molecular formula = C₇H₇O₂₁

Learn more about empirical formula at https://brainly.com/question/2263904

#SPJ4

In scientific notation, the result of multiplying an integer between 1 and 10 by a power of 10 is written.For instance, 650,000,000 can be represented as 6.5 108 in scientific notation.

Always set the base to 10. The exponent must be an integer that is non-zero, therefore it can either be positive or negative. The absolute value of the coefficient must be less than ten and more than one.

a system of symbols for designating unique items. Example: In mathematics, the symbol "" stands for "infinity." There are many notations in mathematics.

To know more about scientific notation visit:-

https://brainly.com/question/18073768

#SPJ1

Answer:

Explanation:

Answer:

Sulfure 3

Oxygen 5

Explanation:

The S stands for Sulfure. And the stands for Oxygen. If you meant the name then its Trisulfur Pentoxide

hopefully that's what you meant.

Answer:

The last one is true.

The equilibrium concentration of a sulfate ion is 32× 10⁻⁶M can be added in a 1. 0 Dash L solution of strontium sulfate which is 0. 10 mol of Sr(CH3CO₂)₂.

Solubility is defined as the maximum amount of a solute that can be dissolved in a known quantity of the solvent at a certain temperature is its solubility.

The solubility of SrSO₄ is:

SrSO₄(s) → Sr²⁺(aq) + SO₄²⁻(aq)

Where Ksp is defined as:

Ksp = 3.2x10⁻⁷ = [Sr²⁺] [SO₄²⁻]

The concentration of Sr is:

0.10mol / 1L = 0.10M = [Sr²⁺]

Replacing in Ksp:

3.2x10⁻⁷ = [0.10M] [SO₄²⁻]

[SO₄²⁻] = 3.2x10⁻⁶M

To know more about solubility here

https://brainly.com/question/28170449

#SPJ4

Ni(OH)₂ is base but this is not strong base this is very weak base and this cannot gives OH⁻ after dissolving in H₂​​​O . this is only dissolve in acidic solution.

A solution is said to be acidic if it contains more positively charged hydrogen ions (H⁺) than negatively charged hydroxide ions (OH⁻). Lemon juice and vinegar are typical examples of acids. The amount of OH ions is greater in bases. Baking soda and regular ammonia are common examples.

Acidic substances can typically be distinguished by their sour flavor. A basic definition of an acid is a molecule that can donate an H⁺ ion and can continue to be energetically favorable even after losing H⁺. Blue litmus paper has a reputation for turning red when exposed to acids. Bases, on the other hand, are distinguished by their bitter flavor and slick consistency.

To know more about acidic solution visit:

https://brainly.com/question/13208021

#SPJ4

you need 3.00 mL of the 4.00 M sulfuric acid solution to make 12.0 mL of a 0.50 M solution.

Solution is a way to solve a problem or address an issue. It can involve finding an answer or coming up with a strategy to tackle a difficult situation. Solutions can be found through research, brainstorming, trial and error, or by using existing resources.

To solve this problem, we must use the equation:
V1C1 = V2C2
Where V1 is the volume of the concentrated solution, C1 is the concentration of the concentrated solution, V2 is the volume of the dilute solution, and C2 is the concentration of the dilute solution.
In this case, V1 is the volume of the 4.00 M solution that we need, C1 is 4.00 M, V2 is 12.0 mL, and C2 is 0.50 M.
Plugging these values into the equation, we can solve for V1:
V1 = (V2C2) / C1
V1 = (12.0 mL)(0.50 M) / (4.00 M)
V1 = 3.00 mL

To learn more about Solution
https://brainly.com/question/25326161
#SPJ4

Sulfur is a solid that when burnt produces two colourless gases: sulfur dioxide (SO2) and sulfur trioxide (SO3). The gas SO2 is strongly acidic, while the gas SO3 is slightly basic. When SO3 is dissolved in water, it forms a solution called sulfuric acid, which is a strong acid. SO2 is also a corrosive gas that can be harmful to humans and the environment. It is often produced as a byproduct of industrial processes, such as the burning of fossil fuels and the production of sulfuric acid.

Hope This Helps You!

3.125 moles of oxygen are present in 50 g.

A mole is the volume of a substance that contains 6.022 X 1023 of the substance's particles, atoms, ions, molecules, etc. A mole is a unit for counting molecules, ions, or atoms. Divide the given mass of an element by its molar mass to find the number of moles in that quantity.

The atomic weight of an element, or its relative atomic mass, on the periodic table, expressed in g/mol, is its molecular mass.

The molar mass of oxygen is 16 g/mol, and there are 3.125 moles in a given amount of mass and molar mass.

Consequently, 3.125 moles of oxygen are present in 50 g.

To know more about moles click here

https://brainly.com/question/26416088

#SPJ4

The volume of gas produced by six tablets would be twice the volume produced by three tablets, or 600 cm³ x 2 = 1200 cm³.

Until they are enclosed in a container, gases lack a definite shape or volume. Gases can expand and contract as they are forced into various container sizes and shapes because of the way their molecules spread out and move randomly.

The volume of the container in which a gas is contained can be used to define the volume of the gas itself.

The volume of a gas reduces as the molecules are crammed closer together when it is compressed. A gas's volume rises when it expands.

To know more about volume of gas visit: https://brainly.com/question/12357202

#SPJ4

Answer:

1200 cm³.

Explanation:

If a laboratory employee has 12.0 grammes of potassium metal, the theoretical yield of potassium oxide that even the scientist may theoretically make from the reaction with oxygen gas is 14.5 gram of K2O.

In chemistry, yield, also known as reaction yield, is a measurement of the number of moles of a product created in ratio to the reactant consumed in a chemical reaction, generally represented as a percentage. Before performing chemical reactions, it is necessary to know how many product will be produced with certain reactant quantities. This is referring to the theoretical yield.

This approach is useful for calculating the theoretical yield of such a chemical process. The yield of a reaction represents how much product is generated by that reaction. The theoretical yield is the amount of product predicted by stoichiometry, whereas the actual yield is the amount produced.

To learn more about Theoretical yield, here

https://brainly.com/question/14408642

#SPJ4

Answer: False

Explanation:

It is false that the broad bands or regions located around the nucleus where the electrons are found are called energy rings.

The nucleus is the centre of an atom. Protons and neutrons are particles that make up the nucleus. Shells of electrons rotate around the nucleus. The atom is made up of a small nucleus surrounded by electrons that move. The nucleus includes protons, with a positive charge equivalent to the negative charge of an electron. Neutrons, which have almost the same mass but still no charge as protons, may also be found in the nucleus.

The nuclear powerful force extends long enough from each baryon to bind protons and neutrons together while repelling the repelling electrical force between positively charged protons. The nuclear force acting has a relatively narrow range and practically vanishes just beyond the nucleus's border.

To know more about the Electrons,  here

https://brainly.com/question/3503522

#SPJ4

The normal boiling point for acetone is 56.5°C. At an elevation of 5300 ft the atmospheric pressure is 630. torr. The vapor pressure of acetone at 22.0°C at this elevation is 212.22 torr.

The equilibrium pressure of a vapour above its liquid (or solid), or the pressure of the vapour produced by the evaporation of a liquid (or solid) above a sample of the liquid (or solid) in a closed container, is the vapour pressure of a liquid. Substance; vapour pressure at 25 °C, as examples.

In Step 1:

The normal boiling point for acetone = 56.5°C.

At an elevation of 5300 ft the atmospheric pressure = 630 torr

ΔHvap = 32.0 kJ/mol

The temperature is 24.0 °C

In Step 2:

ln(p1/p2) = (∆ H/R) (1/T2 - 1/T1)

Normal atmospheric pressure

= 1 atm

= 760 torr

So, (760/630) = ((32.000 J/mol) / (8.314 J/K*mol)) (1/T2 - 1/329.65 K).

T2 = 324.4 K = 51.25 °C.  

This is the boiling point of acetone at 5300 ft.

The vapor pressure = atmospheric pressure at the boiling point for any liquid.

ln (Pv/630atm) = ((32.000 J/mol) / (8.314 J/K*mol)) (1/324.4 K - 1/297.15)

ln (Pv/630) = -13615388.3

Pv = 212.22 torr

Thus, The vapor pressure of acetone at 22.0°C at this elevation is 212.22 torr.

To learn more about the vapor pressure, follow the link;

https://brainly.com/question/11864750

#SPJ1

Answer:

it’s 4

Explanation:

The World Skin Cancer Map shows that Australia has much higher skin cancer rates than Brazil. In Australia, an estimated 5.4 out of 100 people will develop melanoma in their lifetime, compared to 0.4 out of 100 in Brazil.

Skin cancer is a type of cancer that affects the skin cells. It is caused by over-exposure to ultraviolet (UV) radiation from the sun and sun beds. It is the most common type of cancer in the United States, and can affect anyone, regardless of age, gender, or skin color. It is very important to protect your skin from the sun by using sunscreen.

Australia also has higher rates of non-melanoma skin cancer, with estimated rates of 24.3 out of 100 people in Australia, compared to 5.3 out of 100 people in Brazil.

To learn more about Skin Cancer

https://brainly.com/question/13774153

#SPJ1