(D) The direction of the displacement is 28.0 degrees
We can use trigonometry to find the direction of the displacement.
The displacement is the straight line distance between the starting point and ending point of the man's walk. To find the displacement, we can use the Pythagorean theorem:
displacement = sqrt(18^2 + 9.5^2) = 20.5 meters
The direction of the displacement is the angle between the displacement vector and the east direction. We can use the inverse tangent function to find this angle:
tan(theta) = opposite/adjacent = 9.5/18
theta = arctan(9.5/18) = 28.0 degrees
Therefore, the direction of the displacement is 28.0 degrees, which is closest to 28 degrees in the options provided.
For more such questions on displacement
https://brainly.com/question/14422259
#SPJ11
We can use the Pythagorean theorem and trigonometry to solve this problem.
The displacement of the man is the straight-line distance from his starting point to his ending point, which forms the hypotenuse of a right triangle with legs of 18 m and 9.5 m. Using the Pythagorean theorem, we find that the magnitude of his displacement is:
d = sqrt((18)^2 + (9.5)^2) = 20.5 m (rounded to one decimal place)
To find the direction of his displacement, we need to determine the angle that the displacement vector makes with respect to the eastward direction (which we can take as the positive x-axis). This angle can be found using trigonometry:
tan(theta) = opposite/adjacent = 9.5/18
theta = arctan(9.5/18) = 28.2 degrees (rounded to one decimal place)
Therefore, the direction of the man's displacement is 28 degrees north of east, which is approximately northeast.
So the answer is 28.
Learn more about Pythagorean theorem, here:
brainly.com/question/343682
#SPJ11
why is it that most astronomers believe we are living in the ""age of exploration"" for astronomy? what are some of the explorations that have taken place in the last 60 years?
Most astronomers believe we are living in the "age of exploration" for astronomy due to significant advancements in technology, observational capabilities, and our understanding of the universe.
In the last 60 years, several explorations have taken place, revolutionizing our knowledge of the cosmos. One major exploration has been the launch and utilization of space telescopes. Instruments like the Hubble Space Telescope, launched in 1990, have provided breathtaking images and invaluable data, expanding our understanding of distant galaxies, stellar evolution, and the age of the universe. Additionally, the Kepler Space Telescope, launched in 2009, has discovered thousands of exoplanets, leading to groundbreaking insights into planetary systems and the potential for life beyond Earth. Advancements in ground-based observatories have also contributed to the age of exploration. Large-scale telescopes equipped with advanced detectors and adaptive optics technology have enabled astronomers to observe celestial objects with remarkable clarity and detail. These observatories have played a vital role in studying cosmic phenomena, such as black holes, pulsars, supernovae, and the cosmic microwave background radiation. Moreover, significant discoveries have been made in the field of cosmology. The development of precise measurements, such as the cosmic microwave background radiation and the accelerated expansion of the universe, has deepened our understanding of its origins and evolution. The detection of gravitational waves, first observed in 2015, has opened a new window for studying the universe, providing insights into phenomena like neutron star mergers and black hole dynamics.
Learn more about "age of exploration" for astronomy here:
https://brainly.com/question/5165144
#SPJ11
Question 6 of 10
The bonds of the products store 27 kJ more energy than the bonds of the
reactants. How is energy conserved during this reaction?
A. The reaction uses up 27 kJ of energy when bonds break.
B. The surroundings absorb 27 kJ of energy from the reaction
system.
C. The reaction system absorbs 27 kJ of energy from the
surroundings.
D. The reaction creates 27 kJ of energy when bonds form.
Energy conserved during this reaction in this way; The reaction system absorbs 27 kJ of energy from the surroundings. Option C
what should you know about conserving or storing energy in this scenario?In the situation that has been described, it showss that the reaction is endothermic, which means it requires energy to proceed.
The bonds in the products store more energy than those in the reactants, and that extra energy has to come from somewhere, and the only explanation is that it came from the surroundings.
The energy is conserved because it is not lost or created; it is simply transferred from the surroundings to the system.
Find more exercises on energy conservation during a reaction;
https://brainly.com/question/2288857
#SPJ1
What is the reactance of a 9.00 μf capacitor at a frequency of 60.0 hz ?
The reactance of the 9.00 μF capacitor at a frequency of 60.0 Hz is approximately 294.524 ohms.
The reactance (Xc) of a 9.00 μF capacitor at a frequency of 60.0 Hz can be calculated using the formula:
Xc = 1 / (2 * π * f * C)
Where Xc is the capacitive reactance, π is approximately 3.14159, f is the frequency (60.0 Hz), and C is the capacitance (9.00 μF, or 9.00 × 10^-6 F).
Plugging in the values:
Xc = 1 / (2 * 3.14159 * 60.0 * 9.00 × 10^-6)
Xc ≈ 294.524 Ω
The reactance of the 9.00 μF capacitor at a frequency of 60.0 Hz is approximately 294.524 ohms.
To learn more about frequency, refer below:
https://brainly.com/question/5102661
#SPJ11
if the true power is 100 w and the reactive power is 100 var, the apparent power is
The apparent power is 141.42 VA.
The formula to calculate the apparent power (S) is:
S = √(P^2 + Q^2)
where P is the real power in watts, and Q is the reactive power in volt-amperes reactive (VAR).
Given that the true power (P) is 100 watts and the reactive power (Q) is 100 VAR, we can substitute these values into the formula and get:
S = √(100^2 + 100^2) = √(10000 + 10000) = √20000 = 141.42 VA (volt-amperes)
Therefore, the apparent power is 141.42 VA.
Click the below link, to learn more about Apparent Power:
https://brainly.com/question/30904169
#SPJ11
the reservoirs in fig. p6.55 contain water at 20°c. if the pipe is smooth with l = 4500 m and d = 4 cm, what will the flow rate in m3/h be for ∆z = 100 m? neglect minor losses.
The flow rate in m³/h for a smooth pipe with a length of l = 4500 m, diameter of d = 4 cm, and a vertical height difference of ∆z = 100 m, given that the reservoirs contain water at 20°C, is approximately 0.073 m³/h.
To calculate the flow rate, we can use the Bernoulli equation, which relates pressure, velocity, and height at two different points in a fluid flow system. Neglecting minor losses, the Bernoulli equation for the two reservoirs can be written as:
P₁/ρ + v₁²/2g + z₁ = P₂/ρ + v₂²/2g + z₂
where P is pressure, ρ is density, v is velocity, g is the acceleration due to gravity, and z is height. At both reservoirs, the pressure is atmospheric, and the velocity is zero, so the equation simplifies to:
z₁ + v₂²/2g = z₂
we can solve for the velocity v₂ using the equation:
v₂ = √(2g(∆z))
where ∆z is the height difference between the two reservoirs. Substituting the given values, we get:
v₂ = √(2 × 9.81 m/s² × 100 m) = 44.29 m/s
Next, we can use the continuity equation, which states that the mass flow rate is constant at every point in a fluid flow system. The equation can be written as:
Q = Av = πd²/4 × v
where Q is the volumetric flow rate, A is the cross-sectional area of the pipe, and d is the diameter of the pipe. Substituting the given values, we get:
Q = π(4 cm)²/4 × 44.29 m/s × 3.6 × 10⁻³ = 0.073 m³/h.
learn more about Bernoulli equation here:
https://brainly.com/question/31047017
#SPJ11
An object comes to an abrupt stop over 0. 38 seconds with a change in momentum of 23 kgm/s. Determine the Impulse associated with this example.
A) 0. 02Ns
B) 60. 5Ns
C) 23Ns
D) 0Ns
The impulse associated with this example is 23 Ns. Impulse is equal to the change in momentum, so the magnitude of the impulse is equal to the magnitude of the change in momentum, which is 23 kgm/s.
Impulse is defined as the change in momentum of an object. It is calculated by multiplying the force exerted on an object and the time over which the force is applied. In this case, the change in momentum is given as 23 kgm/s.The impulse associated with this example is 23 Ns. Impulse is equal to the change in momentum, so the magnitude of the impulse is equal to the magnitude of the change in momentum, which is 23 kgm/s.
Impulse = Change in momentum
Therefore, the impulse associated with this example is 23 Ns (Newtons-second). The answer is option C) 23 Ns.
learn more about impulse here:
https://brainly.com/question/14395699
#SPJ11
a wind wave with a 100-m wavelength in water that is 25 m deep is an example of what? select one: a. a deep water wave b. a tidal wave c. a shallow water wave d. a transitional wave e. a rogue wave
The wind wave with a 100-m wavelength in water that is 25 m deep is an example of a shallow water wave.
In general, shallow water waves have a wavelength that is much larger than the depth of the water, which is the case in this scenario.
The velocity of shallow water waves is primarily determined by the depth of the water, which is much smaller than the velocity of deep water waves.
As a result, the speed of the wind wave in this case would depend on the depth of the water, and would be slower than a wind wave with the same wavelength in deeper water.
This distinction between shallow and deep water waves is important for understanding ocean wave dynamics and predicting wave behavior in different environments.
To know more about wavelength, refer here:
https://brainly.com/question/13533093#
#SPJ11
Consider a steaming aluminum soda-pop can that contains a small amount of boiling water. When it is quickly inverted into a bath of cooler water the can is dramatically crushed by atmospheric pressure. This occurs because the pressure inside the can is rapidly reduced by Consider a steaming aluminum soda-pop can that contains a small amount of boiling water. When it is quickly inverted into a bath of cooler water the can is dramatically crushed by atmospheric pressure. This occurs because the pressure inside the can is rapidly reduced by contact with the relatively cool water. Rapid conduction of heat to the relatively cool water. Reduced internal energy. Condensation of steam inside. Sudden slowing of the air and steam molecules inside
When a steaming soda can with boiling water is inverted into cooler water, it gets crushed due to a rapid reduction in internal pressure caused by contact with the cooler water.
When a steaming aluminum soda can, containing boiling water, is inverted into a bath of cooler water, it undergoes a fascinating phenomenon known as the soda can crushing experiment. The crushing occurs due to the rapid reduction in pressure inside the can.
The contact between the hot can and the cooler water causes the heat to conduct quickly, resulting in the condensation of steam inside the can. As the steam condenses, it occupies less space, reducing the internal pressure of the can.
Simultaneously, the sudden slowing of air and steam molecules inside the can further contributes to the reduction in pressure. As a result, the external atmospheric pressure becomes greater than the internal pressure, causing the can to collapse under the immense force. This experiment serves as a captivating demonstration of the power of atmospheric pressure.
Learn more about crushing experiment here:
https://brainly.com/question/15006049
#SPJ11
find the minimum diameter of a 49.5-m-long nylon string that will stretch no more than 1.49 cm when a load of 71.9 kg is suspended from its lower end. assume that ynylon = 3.51⋅⋅109 n/m2.
The minimum diameter of the nylon string is approximately 29.6 mm.
To find the minimum diameter of the nylon string, we can use the formula for the elongation of a hanging string:
ΔL = FL/2Ay
Where ΔL is the elongation, F is the force (in Newtons), L is the length of the string, A is the cross-sectional area, and y is the Young's modulus.
First, we need to convert the load of 71.9 kg to Newtons:
F = m*g = (71.9 kg)*(9.81 m/s^2) = 705.14 N
Next, we can rearrange the formula to solve for A:
A = FL/2ΔL
Substituting in the given values, we get:
A = (705.14 N)*(49.5 m)/(2*(0.0149 m)*(3.51*10^9 N/m^2))
A = 5.94*10^-8 m^2
Finally, we can solve for the diameter using the formula for the area of a circle:
A = (π/4)*d^2
Substituting in the calculated value of A, we get:
5.94*10^-8 m^2 = (π/4)*d^2
Solving for d, we get:
d = √(4*(5.94*10^-8 m^2)/π)
d = 3.88*10^-4 m
Therefore, the minimum diameter of the nylon string is 3.88*10^-4 m.
To know more about diameter visit :-
https://brainly.com/question/5501950
#SPJ11
a resistor dissipates 2.15 w when the rms voltage of the emf is 12.0 v .
By dividing the RMS voltage by the resistance, the current flowing through the resistor can be determined.
A resistor is an electrical component that resists the flow of current. It is designed to dissipate electrical energy in the form of heat. The amount of power dissipated by a resistor depends on the voltage and current flowing through it. In this case, the resistor is dissipating 2.15 W when the root mean square (RMS) voltage of the electromotive force (EMF) is 12.0 V.
The RMS voltage is the equivalent DC voltage that produces the same power as the AC voltage. The resistor's power dissipation can be calculated using Ohm's law and the formula for power. The resistance of the resistor can be determined by dividing the voltage by the current flowing through it. Once the resistance is known, the power dissipation can be calculated by multiplying the square of the current by the resistance. Therefore, the current flowing through the resistor can be determined by dividing the RMS voltage by the resistance.
More on resistor: https://brainly.com/question/28813904
#SPJ11
The resistance of the resistor is 67.2 ohms.
How to find the resistance?When an electric current flows through a resistor, some of the electrical energy is converted into heat energy and dissipated by the resistor. This is known as power dissipation, which is measured in watts (W).
The amount of power dissipated by a resistor can be calculated using the formula:
P = V²/ R
where P is the power in watts, V is the voltage across the resistor in volts, and R is the resistance of the resistor in ohms.
In this case, we are given that the rms voltage of the emf (electromotive force) is 12.0 V and the power dissipated by the resistor is 2.15 W. We can use the above formula to find the resistance of the resistor:
R = V² / P = (12.0 V)²/ 2.15 W = 67.2 ohms
Therefore, the resistance of the resistor is 67.2 ohms.
Learn more about resistance
brainly.com/question/30799966
#SPJ11
a mineral originally contained 1,000 radioactive parents. after two half-lives have passed the mineral will contain parent atoms and daughter atoms. enter in the correct numerical values.
Answer:
N = N0 / 4
After 2 half-lives 1/4 of the original N0 will be present
250 - number of parent atoms left
750 - number of daughter atoms present
what is the order of the differential equation that models the free vibrations of a spring-mass-damper system?
The order of the differential equation that models the free vibrations of a spring-mass-damper system is 2.
This is because the motion of the system can be described by Newton's second law of motion, which relates the force acting on an object to its acceleration.
In the case of a spring-mass-damper system, the force is the sum of the forces due to the spring, the mass, and the damper, and the acceleration is the second derivative of the position with respect to time.
Therefore, the resulting differential equation is a second-order differential equation.
To know more about equation refer here
https://brainly.com/question/10413253#
#SPJ11
Determine the change in the forward-bias voltage on a pn junction with a change in temperature to maintain a constant diode current. Consider a silicon pn junction initially biased at 0.60 V at T=300 K. Assume the temperature increases to T=310 K. Calculate the change in the forward-bias voltage required to maintain a constant current through the junction
To maintain a constant diode current at an increased temperature of 310 K, the forward-bias voltage on the silicon pn junction would need to decrease by approximately 0.0105 V.
As the temperature of the silicon pn junction diode increases from 300 K to 310 K, the forward-bias voltage needs to decrease to maintain a constant diode current. This is because the temperature coefficient of silicon diodes is typically negative, indicating that the forward-bias voltage decreases with increasing temperature. By multiplying the temperature coefficient (-2 mV/°C) by the temperature difference (10 K), we find that the forward-bias voltage should decrease by approximately 20 mV or 0.020 V. Therefore, the change in the forward-bias voltage required to maintain a constant diode current is approximately 0.020 V when the temperature increases from 300 K to 310 K.
Learn more about pn junction here:
https://brainly.com/question/14804478
#SPJ11
points A large parallel-plate capacitor is being charged and the magnitude of the electric field between the plates of the capacitor is increasing at the rate 4. dt What is correct about the magnetic field B in the region between the plates of the charging capacitor? 1. Nothing about the field can be determined unless the charging current is known. 2. Its magnitude is inversely proportional to dt 3. It is parallel to the electric field. 4. Its magnitude is directly proportional to DE dt 5. Nothing about the field can be deter- mined unless the instantaneous electric field is known.
The correct statement about the magnetic field B is:
1. Nothing about the field can be determined unless the charging current is known.
The magnetic field in the region between the plates is influenced by the charging current, as described by Ampere's law. Without knowing the charging current, it's not possible to determine any specific information about the magnetic field B in this case.
To know more about magnetic field refer https://brainly.com/question/19878202
#SPJ11
a freshly caught catfish is placed on a spring scale, and it oscillates up and down with a period of 0.207 ss .If the spring constant of the scale is 2160 N/m, what is the mass of the catfish?
If the spring constant of the scale is 2160 N/m, the mass of the catfish is approximately 0.455 kg.
To find the mass of the catfish, we need to use the formula for the period of an oscillating spring, which is:
T = 2π√(m/k)
Where T is the period, m is the mass, and k is the spring constant. Rearranging this formula, we get:
m = (T^2 * k)/(4π^2)
Substituting the given values, we get:
m = (0.207^2 * 2160)/(4π^2)
m ≈ 0.455 kg
Therefore, the mass of the catfish is approximately 0.455 kg. This calculation assumes that the spring scale is ideal and there is no friction or damping in the system. It is important to note that the accuracy of the measurement can be affected by these factors and may need to be taken into account for more precise measurements.
For more question on mass
https://brainly.com/question/86444
#SPJ11
To find the mass of the catfish, we need to use the equation T=2π√(m/k), where T is the period, m is the mass, and k is the spring constant. We are given T=0.207 s and k=2160 N/m, so we can solve for m. Rearranging the equation, we get m=(T^2*k)/(4π^2). Plugging in the values, we get m=(0.207^2*2160)/(4π^2)=1.05 kg.
Therefore, the mass of the catfish is approximately 1.05 kg. The spring constant of the scale is important because it determines how much the spring will stretch when a force is applied. In this case, the oscillation of the spring is directly related to the mass of the catfish and the spring constant of the scale. It is a constant that is unique to the spring and is necessary to determine the mass accurately.
To learn more about mass click here: brainly.com/question/19694949
#SPJ11
specify the boundary conditions for each of the following cases in terms of the chosen xy-frame. assume plane strain conditions prevail. [4 4 points] for (2.i) assume that the structure is an is
When considering a specific xy-frame, boundary conditions are established to define the limits within which the structure can deform which include include displacement and rotation restrictions, as well as stress and strain limitations.
In structural mechanics, boundary conditions are essential parameters that define the external environment in which a structure exists. In the case of plane strain conditions, boundary conditions are set to restrict the deformation of the structure to only two dimensions.
For the case of an isotropic structure, the boundary conditions will depend on the type of support provided at the edges of the structure. For example, if the structure is fixed at the edges, it will have zero displacement and zero rotation, and the boundary conditions will reflect this. Similarly, if the structure is allowed to move or rotate freely at the edges, the boundary conditions will allow for this motion.
In general, the boundary conditions for plane strain conditions will include displacement and rotation restrictions, as well as stress and strain limitations. The specific values for these restrictions will depend on the material properties of the structure, as well as the type of loading it is subjected to.
In summary, the boundary conditions for a structure under plane strain conditions in a chosen xy-frame are essential to defining the external environment in which the structure exists. The specific conditions will depend on the type of support provided at the edges of the structure and the material properties of the structure. It is essential to establish appropriate boundary conditions to ensure accurate analysis and prediction of the behavior of the structure under loading.
To know more about boundary conditions, refer to the link below:
https://brainly.com/question/13440862#
#SPJ11
An instrument weighing 5 lb is mounted on the housing of a pump that rotates at 30 rpm. The amplitude of motion of the housing is 0.003 ft.
Given that an instrument weighing 5 lb is mounted on the housing of a pump that rotates at 30 rpm, and the amplitude of motion of the housing is 0.003 ft, we can analyze the situation as follows:
1. The instrument weighs 5 lb.
2. The pump housing, where the instrument is mounted, rotates at a speed of 30 revolutions per minute (rpm).
3. The amplitude of the motion of the housing is 0.003 ft, meaning that the housing moves up and down with a maximum displacement of 0.003 ft from its equilibrium position during each rotation.
From this information, we can understand that the instrument experiences a periodic motion due to the rotating pump housing, and the amplitude of this motion is 0.003 ft.
To know more about Amplitude visit: https://brainly.com/question/8662436
#SPJ11
A point source emits sound waves with a power output of 100 watts.What is the sound level (in dB) at a distance of 10 m?
Question 8 answers
a. 139
b. 119
c. 129
d. 109
e. 10
The sound level at a distance of 10 meters from a point source emitting sound waves with a power output of 100 watts is 119 dB. The correct answer is option (b).
To find the sound level (in dB) at a distance of 10 meters, we can use the formula:
Sound Level (dB) = 10 * log10 (I/I₀)
Where I is the intensity of the sound, I₀ is the reference intensity (10⁻¹² W/m²), and log10 is the base-10 logarithm. First, we need to calculate the intensity (I) using the formula:
I = Power / (4 * π * r²)
Where Power is the power output (100 watts) and r is the distance from the point source (10 meters).
I = 100 / (4 * π * 10²) = 0.0796 W/m²
Now, we can calculate the sound level:
Sound Level (dB) = 10 * log10 (0.0796 / 10⁻¹²) ≈ 119 dB
Thus, the sound level at 10 meters is 119 dB.
Learn more about sound waves here:
https://brainly.com/question/31851162
#SPJ11
answer the following questions that pertain to the basics of infrared spectroscopy: what is generally considered to be the frequency range (in cm or wavenumbers) of infrared radiation?
The frequency range of infrared radiation is generally considered to be 4000 to 400 [tex]cm^{-1[/tex]or wavenumbers.
Infrared radiation has a frequency range of approximately [tex]10^{13[/tex] to [tex]10^{14[/tex]Hz, or 4000 to 400 [tex]cm^{-1[/tex](wavenumbers). This range corresponds to the vibrational energies of molecules, which are affected by the masses of their atoms and the strengths of their chemical bonds. Infrared spectroscopy is a widely used analytical technique that involves passing infrared radiation through a sample and measuring the absorption or transmission of light at different wavelengths.
The resulting spectrum can provide information about the functional groups and chemical bonds present in the sample, allowing for identification and quantification of compounds. Infrared spectroscopy is used in a variety of fields, including chemistry, biochemistry, and materials science.
Learn more about Infrared radiation here:
https://brainly.com/question/20779091
#SPJ11
When an earthquake strikes it releases seismic waves that travel in concentric circles.a. Trueb. False
The statement "When an earthquake strikes it releases seismic waves that travel in concentric circles" is true. When an earthquake occurs,
the energy is released in the form of seismic waves that travel through the Earth's layers. These waves move in all directions from the point of origin, which is also known as the focus or hypocenter.
The seismic waves that are released during an earthquake travel through the Earth's crust, mantle, and core in concentric circles, similar to ripples that spread out from a rock dropped into a pond.
There are two types of seismic waves: primary waves (P-waves) and secondary waves (S-waves). P-waves are the fastest and travel through solid and liquid layers of the Earth,
while S-waves are slower and can only travel through solid materials. Both types of waves move in concentric circles, spreading out from the epicenter of the earthquake.
In conclusion, seismic waves released during an earthquake travel in concentric circles, and this statement is true. These waves can cause widespread damage to buildings and other structures,
which is why it is important to be prepared and have an emergency plan in place in case of an earthquake.
To know more aboutconcentric circles refer here
https://brainly.com/question/29917925#
#SPJ11
8.4 air at 200 °f flows at standard atmospheric pressure in a pipe at a rate of 0.08 lb/s. determine the minimum diameter allowed if the flow is to be laminar..
The minimum diameter allowed for laminar flow of air is approximately 0.0674 ft or 0.809 inches.
To determine the minimum diameter allowed for laminar flow of air at 200°F and standard atmospheric pressure in a pipe with a flow rate of 0.08 lb/s, we can use the Reynolds Number equation.
Reynolds Number (Re) is a dimensionless number that represents the ratio of inertial forces to viscous forces in a fluid flow.
For laminar flow, the Re value should be less than 2300. The formula to calculate Reynolds Number is:
Re = (density x velocity x diameter) / viscosity.
Given the values, density of air at standard conditions is 0.0765 lb/ft³, viscosity is 1.05 x 10⁻⁵ lb-s/ft², velocity is 0.08 lb/s divided by the cross-sectional area of the pipe (π/4 x diameter²), and diameter is the unknown variable.
Solving for diameter using the Reynolds Number equation, we get the minimum diameter allowed for laminar flow of air is approximately 0.0674 ft or 0.809 inches.
Learn more about Reynolds number at
https://brainly.com/question/13218447
#SPJ11
most comets are discovered when their coma develops, giving them a fuzzy appearance instead of stellar such as asteroids. group of answer choices T/F
True. Most comets are discovered when their coma develops, giving them a fuzzy appearance instead of a stellar one like asteroids. Comets are celestial objects composed of ice, dust, and rock. When they approach the Sun, the heat causes the ice to sublimate, releasing gas and dust particles.
This process forms the coma, which is a temporary atmosphere surrounding the comet's nucleus. The solar radiation and solar wind cause the dust and gas in the coma to form a glowing tail, which can extend millions of kilometers into space. This distinct, fuzzy appearance is what distinguishes comets from other celestial objects such as asteroids, which are primarily composed of rock and metal and do not have a coma.
Asteroids are often found in the asteroid belt between Mars and Jupiter, while comets usually originate from the outer regions of our solar system, such as the Kuiper Belt and the Oort Cloud. The appearance of a comet's coma and tail make it easier for astronomers to discover and differentiate them from asteroids and other celestial bodies.
to know more about comets click this link
brainly.com/question/12443607
#SPJ11
A liquid that can be modeled as water of mass 0.25kg is heat to 80 degrees Celsius. The liquid is poured over ice of mass 0.070kg at 0 degrees Celsius. What is the temperature at thermal equilibrium, assuming no energy loss to the environment? How much energy must be removed from 0.085kg of steam at 120 degrees Celsius to form liquid water at 80 degrees Celsius?
Temperature at equilibrium is 0 degrees Celsius. Energy needed to remove from steam is 36.89 kJ.
1. At thermal equilibrium, the temperature of the liquid and ice mixture will be 0 degrees Celsius. To find the amount of energy required to reach thermal equilibrium, we use the equation:
Q = m * c * deltaT,
where
Q is the heat transferred,
m is the mass,
c is the specific heat capacity, and
deltaT is the change in temperature.
The heat transferred from the hot liquid to the ice is equal to the heat required to melt the ice and then raise its temperature to 0 degrees Celsius. Using this equation, we find that:
Q = 117.5 J.
2. To find the amount of energy that needs to be removed from the steam to form liquid water at 80 degrees Celsius, we use the equation:
Q = mL,
where
Q is the heat transferred,
m is the mass, and
L is the latent heat of vaporization.
First, we need to find the mass of the steam that needs to be condensed. We know that the total mass of the system is 0.085kg, so the mass of the steam can be found by subtracting the mass of the liquid water at 80 degrees Celsius from the total mass.
Using this equation, we find that the mass of the steam is 0.075kg. The latent heat of vaporization for water is 2.26 x [tex]10^6[/tex] J/kg.
Plugging in the values, we find that:
Q = 36.89 kJ.
For more such questions on Energy, click on:
https://brainly.com/question/13881533
#SPJ11
1a. The temperature at thermal equilibrium after pouring water (mass = 0.25 kg) at 80°C over ice (mass = 0.070 kg) at 0°C is approximately 0°C.
Determine the final temperature?To find the final temperature at thermal equilibrium, we can apply the principle of conservation of energy. The heat lost by the water as it cools down will be equal to the heat gained by the ice as it melts.
The heat lost by the water can be calculated using the formula: Q₁ = m₁c₁ΔT₁, where m₁ is the mass of water, c₁ is the specific heat capacity of water, and ΔT₁ is the change in temperature.
The heat gained by the ice can be calculated using the formula: Q₂ = m₂L, where m₂ is the mass of ice and L is the latent heat of fusion.
At thermal equilibrium, Q₁ = Q₂. Therefore, m₁c₁ΔT₁ = m₂L.
Rearranging the equation, we have ΔT₁ = (m₂L) / (m₁c₁).
Substituting the given values, ΔT₁ = (0.070 kg * 334,000 J/kg) / (0.25 kg * 4,186 J/(kg·°C)) = 0.56 °C.
Since the initial temperature of the ice is 0°C, the final temperature at thermal equilibrium is approximately 0°C.
Note: The specific heat capacity of water (c₁) is 4,186 J/(kg·°C), and the latent heat of fusion (L) for ice is 334,000 J/kg.
1b. The amount of energy that must be removed from 0.085 kg of steam at 120°C to form liquid water at 80°C is approximately 244,400 J.
To find the energy?To determine the energy that needs to be removed, we can calculate the heat lost by the steam as it cools down from 120°C to 80°C.
The heat lost by the steam can be calculated using the formula: Q = mcΔT, where m is the mass of steam, c is the specific heat capacity of steam, and ΔT is the change in temperature.
The specific heat capacity of steam (c) is approximately 2,010 J/(kg·°C).
Substituting the given values, Q = (0.085 kg * 2,010 J/(kg·°C)) * (120°C - 80°C) = 8,535 J/°C * 40°C = 341,400 J.
Therefore, the amount of energy that must be removed from 0.085 kg of steam at 120°C to form liquid water at 80°C is approximately 244,400 J.
Note: The specific heat capacity of steam (c) is approximate and may vary slightly with temperature.
To know more about energy, refer here:
https://brainly.com/question/8630757#
#SPJ4
Complete question here:
1a. A liquid that can be modeled as water of mass 0.25kg is heated to 80 degrees celsius. The liquid is poured over ice of mass 0.070kg at 0 (zero) degrees celsius. What is the temperature at thermal equilibrium, assuming no energy loss to the environment?
1b. how much energy must be removed from 0.085kg of steam at 120 degrees celsius to form liquid water at 80 degrees celsius?
A series RLC circuit attached to a 120 V/60 Hz power line draws 2.20 A of current with a power factor of 0.940. What is the value of the resistor?
The value of the resistor in the series RLC circuit is approximately: 51.98 Ω.
The value of the resistor in the series RLC circuit can be found using the formula for the power factor of a circuit, which relates the resistance, inductance, and capacitance of the circuit to the angle between the voltage and current waveforms.
Using the given values, we can calculate the impedance of the circuit as:
Z = V/I = 120 V/2.20 A = 54.55 Ω
Next, we can use the power factor to determine the angle between the voltage and current waveforms:
cos(θ) = PF = 0.940
θ = cos⁻¹(0.940) = 19.49°
The impedance of the circuit can also be expressed in terms of its components:
Z = R + j(XL - XC)
where R is the resistance,
XL is the inductive reactance, and
XC is the capacitive reactance.
Since the circuit is operating at 60 Hz, we can use the formulas for XL and XC:
XL = 2πfL = 2π(60 Hz)(L)
XC = 1/(2πfC) = 1/(2π(60 Hz)(C))
Substituting these expressions into the impedance equation, we get:
Z = R + j(2π(60 Hz)(L) - 1/(2π(60 Hz)(C)))
Taking the real part of this equation, we can solve for the resistance:
R = Zcos(θ) = 54.55 Ω cos(19.49°) = 51.98 Ω
To know more about "Impedance" refer here:
https://brainly.com/question/30040649#
#SPJ11
a compressed air tank carried by scuba divers has a volume of 9.5 ll and a pressure of 150 atmatm at 20∘c∘c. If the gas was instead in a cylinder with a floating, massless, frictionless piston, what would the volume of the gas be (in liters) at STP?Express the volume in liters to two significant digits.
The volume of the gas at STP would be approximately 21 liters when using a floating, massless, frictionless piston.
To find the volume of the gas at standard temperature and pressure (STP), we will use the combined gas law formula: (P1 × V1)/T1 = (P2 × V2)/T2.
Given, initial volume V1 = 9.5 L, initial pressure P1 = 150 atm, and initial temperature T1 = 20°C (293.15 K).
At STP, final pressure P2 = 1 atm, and final temperature T2 = 0°C (273.15 K).
Solving for the final volume V2: V2 = (P1 × V1 × T2) / (P2 × T1) = (150 × 9.5 × 273.15) / (1 × 293.15) ≈ 21 liters.
Thus, the volume of the gas at STP is approximately 21 liters.
Learn more about combined gas law here:
https://brainly.com/question/30458409
#SPJ11
A system releases 15Kj of energy as heat and does 10 Kj of work on surroudings, What is change in internal energy ?+10Kj25Kj-25Kj-5Kj
A system releases 15Kj of energy as heat and does 10 Kj of work on surroundings. The change in internal energy is 5 Kj.
The change in internal energy (ΔU) is given by the formula:
ΔU = Q - W
where Q is the heat energy added to or removed from the system, and W is the work done by or on the system.
Substituting the given values, we get:
ΔU = 15 Kj - 10 Kj = 5 Kj
For more question on energy click on
https://brainly.com/question/8101588
#SPJ11
The change in internal energy of the system is 5 kJ. This means that the system gained 5 kJ of internal energy.
The first law of thermodynamics states that the change in internal energy (ΔU) of a system is equal to the heat added to the system (Q) minus the work done by the system (W). Mathematically, this can be represented as:
ΔU = Q - W
In this problem, we are given that the system releases 15 kJ of energy as heat and does 10 kJ of work on the surroundings. We can substitute these values into the equation to find the change in internal energy:
ΔU = 15 kJ - 10 kJ
ΔU = 5 kJ
Therefore, the change in internal energy of the system is 5 kJ. This means that the system gained 5 kJ of internal energy.
It's important to note that the positive value for ΔU indicates that the internal energy of the system increased, meaning that the system absorbed more energy than it released to the surroundings. If ΔU had been negative, it would indicate that the system released more energy to the surroundings than it absorbed, meaning that the internal energy of the system decreased.
Learn more about internal energy here:
https://brainly.com/question/14668303
#SPJ11
The foreman shouts at John to hurry up and he increases his pushing force to 50N. Calculate the wheelbarrow's acceleration
The foreman shouts at John to hurry up and he increases his pushing force to 50N. Calculate the wheelbarrow's acceleration. When the foreman shouts at John to hurry up and John increases his pushing force to 50N, the wheelbarrow's acceleration can be calculated as follows:
F = 50N and m = 20 kg. Now, the acceleration of the wheelbarrow can be calculated using the formula below;
F = m × a, Where, F is the force applied, m is the mass of the object and, a is the acceleration of the object.
Rearranging the formula, we have; a = F/m.
Substituting the values in the formula; a = 50/20a = 2.5 m/s².
Therefore, the wheelbarrow's acceleration is 2.5 m/s².
Learn more about force here ;
https://brainly.com/question/30507236
#SPJ11
Suppose a spaceship heading straight towards the Earth at 0.85c can shoot a canister at 0.25c relative to the ship. If the canister is shot directly at Earth, what is the ratio of its velocity, as measured on Earth, to the speed of light? What about if it is shot directly away from the Earth (again, relative to c)?
A spaceship heading straight towards the Earth at 0.85c can shoot a canister at 0.25c relative to the ship. If the canister is shot directly at Earth, the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931. If it is shot directly away from the Earth then the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
We can use the relativistic velocity addition formula to calculate the velocity of the canister relative to the Earth in both cases
If the canister is shot directly at Earth
Let vship = 0.85c be the velocity of the spaceship relative to Earth, and vcanister = 0.25c be the velocity of the canister relative to the spaceship. Then, the velocity of the canister relative to Earth is
vearth = (vship + vcanister) / (1 + vship*vcanister/[tex]c^{2}[/tex])
Plugging in the values gives
vearth = (0.85c + 0.25c) / (1 + 0.85c*0.25c/[tex]c^{2}[/tex]) = 0.931c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.931.
If the canister is shot directly away from Earth
In this case, the relative velocity between the spaceship and the canister is vcanister' = -0.25c (note the negative sign), since the canister is moving in the opposite direction. The velocity of the canister relative to Earth is then
vearth' = (vship + vcanister') / (1 - vship*vcanister'/[tex]c^{2}[/tex])
Plugging in the values gives
vearth' = (0.85c - 0.25c) / (1 - 0.85c*(-0.25c)/[tex]c^{2}[/tex]) = 0.387c
So the ratio of the canister's velocity, as measured on Earth, to the speed of light is 0.387.
To know more about velocity here
https://brainly.com/question/31325078
#SPJ4
A vertical, 1.24-m length of 18-gauge (diameter of 1.024 mm) copper wire has a 160.0-N ball hanging from it.
a. What is the wavelength of the third harmonic for this wire?
b. A 500.0 N ball now replaces the original ball. What is the change in the wavelength of the third harmonic caused by replacing the light ball with the heavy one?
a. The wavelength of the third harmonic for the wire can be calculated using the formula λ = 2L/n, where L is the length of the wire and n is the harmonic number. Substituting the values, the wavelength is 0.414 m.
b. Replacing the light ball with the heavy one increases the tension in the wire. The change in wavelength can be calculated using the formula Δλ = λ × ΔT/T, where ΔT is the change in tension and T is the initial tension. However, the diameter and length of the wire remain the same, so there is no change in the wavelength of the third harmonic.
a. The third harmonic corresponds to n = 3. Using the formula λ = 2L/n, we can calculate the wavelength as follows: λ = 2(1.24 m) / 3 = 0.414 m
b. The change in wavelength is determined by the change in tension. However, the diameter and length of the wire remain the same, so they do not affect the wavelength. As a result, the change in the tension caused by replacing the ball does not alter the wavelength of the third harmonic. Therefore, there is no change in the wavelength of the third harmonic.
learn more about wavelength here:
https://brainly.com/question/32056330
#SPJ11
material that falls back to the lunar surface after being blasted out by the impact of the space object is called
The material that falls back to the lunar surface after being blasted out by the impact of a space object is called "ejecta."
When a space object, such as a meteoroid or asteroid, impacts the lunar surface, it excavates and ejects material from the Moon. This material is referred to as "ejecta." Ejecta consists of a mixture of lunar soil, rock fragments, and vaporized debris that was forcibly expelled from the impact site. As the ejecta is launched into space, it follows a ballistic trajectory, influenced by the Moon's gravity, before eventually falling back to the lunar surface. The composition and distribution of the ejecta provide valuable insights into the impact event, including the size and velocity of the impacting object, and can also contribute to the accumulation of regolith and the formation of impact craters on the Moon.
Learn more about lunar surface here:
https://brainly.com/question/30756729
#SPJ11