A polymer rubber band can stretch more than a metal paper clip because:-covalent bonds along polymer chains can stretch and rotate-covalent bonds along polymer chains can rotate and the van der waals bonds between chains allow chain slippage-covalent bonds along polymer chains can break and the van der waals bonds between chains allow chain slippage-covalent bonds along polymer chains can stretch and the van der waals bonds between chains allow chain slippage-covalent bonds along polymer chains can rotate and break

Answers

Answer 1

The correct answer is: covalent bonds along polymer chains can stretch and the van der Waals bonds between chains allow chain slippage.

When you stretch a polymer rubber band, the covalent bonds along the polymer chains stretch and rotate, allowing the chains to align in the direction of the stretching force.

Simultaneously, the van der Waals forces between the chains allow them to slip past each other, allowing the band to stretch even further. Van der Waals forces are weak intermolecular forces caused by transient dipoles in the electron distribution of polymer chains.

As a result of the elasticity produced by the covalent bonds between the atoms in the polymer chains, when the stretching force is released, the rubber band returns to its original shape.

For such more question on covalent bonds:

https://brainly.com/question/2746509

#SPJ11

Answer 2

The correct answer is: covalent bonds along polymer chains can stretch and the van der Waals bonds between chains allow chain slippage.

When you stretch a polymer rubber band, the covalent bonds along the polymer chains stretch and rotate, allowing the chains to align in the direction of the stretching force. Simultaneously, the van der Waals forces between the chains allow them to slip past each other, allowing the band to stretch even further. Van der Waals forces are weak intermolecular forces caused by transient dipoles in the electron distribution of polymer chains. As a result of the elasticity produced by the covalent bonds between the atoms in the polymer chains, when the stretching force is released, the rubber band returns to its original shape.

 Learn more about polymer here:

brainly.com/question/2746509

#SPJ11


Related Questions

how do we see cpe c program

Answers

In order to see a CPE C program, we need to first understand what CPE and C programming language are. CPE stands for "Critical Path Engineering" which is a method used to analyze and optimize complex systems.

C programming language, on the other hand, is a popular programming language used for system programming, embedded systems, and general-purpose programming.

To see a CPE C program, we would need to have access to the source code written in the C programming language.

This code can be viewed and edited using a text editor or an Integrated Development Environment (IDE).

Once the code is written, it can be compiled into an executable file that can be run on a computer or device. To understand how the program works, we would need to analyze the code and its logic.

Learn more about Language programming at

https://brainly.com/question/30695853

#SPJ11

You are in air looking at an angle into a glass window with an index of refraction of 1.6. What is the minimum angle (relative to straight into the window) at which you will see total internal reflection? O 38.7° 0 45.0° O 51.3° Total internal reflection will not occur in this situation U

Answers

26.3 degrees is the minimum angle at which total internal reflection will occur

To determine the minimum angle for total internal reflection in this situation, we need to use Snell's law and the concept of critical angle. The critical angle is the angle of incidence at which light is refracted at an angle of 90 degrees and no light is transmitted, resulting in total internal reflection.

The formula for critical angle is:

sin θc = n2/n1

Where θc is the critical angle, n1 is the index of refraction of the medium the light is coming from (air in this case), and n2 is the index of refraction of the medium the light is entering (the glass window with an index of refraction of 1.6).

Plugging in the values, we get:

sin θc = 1.6/1

sin θc = 1.6

θc = sin^-1 (1.6)

θc ≈ 63.7°

This means that any angle of incidence greater than 63.7° will result in total internal reflection. However, we are looking for the minimum angle, so we subtract this value from 90 degrees (the angle of incidence where light is refracted at an angle of 0 degrees and goes straight into the glass):

90° - θc = 90° - 63.7°

Minimum angle = 26.3°

Therefore, the minimum angle at which total internal reflection will occur in this situation is 26.3 degrees.

More on internal reflection: https://brainly.com/question/31136439

#SPJ11

bicycle tire that has a volume of 0.85l is inflated to 140 pounds per square inch. what will be the pressure in the tire if the tire expands to 0.95l at a constant temperature

Answers

The new pressure in the bicycle tire when it expands to 0.95 L at constant temperature is approximately 124.21 psi. The relationship between the volume and pressure of a gas. According to Boyle's Law, the volume of a gas is inversely proportional to its pressure at a constant temperature.


In this case, the initial volume of the bicycle tire is 0.85l and it is inflated to 140 pounds per square inch. To find the initial pressure in the tire, we can use the formula:
Pressure = Force / Area
The formula for Boyle's Law is:
P1V1 = P2V2
44.59 pounds per square inch x 0.85l = P2 x 0.95l
P2 = (44.59 pounds per square inch x 0.85l) / 0.95l
P2 = 39.79 pounds per square inch (rounded to two decimal places)
P1V1 = P2V2.
Given:
P1 (initial pressure) = 140 psi
V1 (initial volume) = 0.85 L
V2 (final volume) = 0.95 L
We need to find P2 (final pressure).
Using the equation, P1V1 = P2V2:
(140 psi)(0.85 L) = P2(0.95 L)
Now, solve for P2:
P2 = (140 psi)(0.85 L) / 0.95 L
P2 ≈ 124.21 psi.

To know more about temperature visit :-

https://brainly.com/question/29072206

#SPJ11

Calculate the cell potential at 25?C for the cell
Fe(s)?(Fe2+(0.100 M)??Pd2+(1.0 è 10-5 M)?Pd(s)
given that the standard reduction potential for Fe2+/Fe is -0.45 V and for Pd2+/Pd is +0.95 V.
a. +1.16 V
b. +1.28 V
c. +1.52 V
d. +1.68 V
I need the full steps to get to the solution.

Answers

The cell potential at 25°C for the given cell is +1.16 V. Answer A is correct.

The cell potential can be calculated using the Nernst equation:

Ecell = E°cell - (RT/nF)ln(Q)

where E°cell is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in kelvin (25°C = 298 K), n is the number of electrons transferred in the balanced half-reactions, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.

First, write the balanced half-reactions:

Fe(s) → Fe2+(aq) + 2 e-

Pd2+(aq) + 2 e- → Pd(s)

The overall reaction is the sum of the half-reactions:

Fe(s) + Pd2+(aq) → Fe2+(aq) + Pd(s)

The standard cell potential is:

E°cell = E°(cathode) - E°(anode) = +0.95 V - (-0.45 V) = +1.40 V

The reaction quotient Q can be calculated using the concentrations of the species involved:

Q = [Fe2+] / [Pd2+]^2

Substitute the values given:

Q = (0.100 M) / (1.0×10^-5 M)^2 = 1.0×10^7

Substitute all the values into the Nernst equation:

Ecell = +1.40 V - (8.314 J/mol·K / (2 × 96,485 C/mol)) × ln(1.0×10^7)

Ecell = +1.16 V

Option A.

For more such questions on Nernst equation

https://brainly.com/question/21601855

#SPJ11

The cell potential at 25°C for the given cell is +1.16 V. Answer A is correct.The cell potential can be calculated using the Nernst equation:

Ecell = E°cell - (RT/nF)ln(Q)where E°cell is the standard cell potential, R is the gas constant (8.314 J/mol·K), T is the temperature in kelvin (25°C = 298 K), n is the number of electrons transferred in the balanced half-reactions, F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient.First, write the balanced half-reactions:Fe(s) → Fe2+(aq) + 2 e-Pd2+(aq) + 2 e- → Pd(s)The overall reaction is the sum of the half-reactions:Fe(s) + Pd2+(aq) → Fe2+(aq) + Pd(s)The standard cell potential is:E°cell = E°(cathode) - E°(anode) = +0.95 V - (-0.45 V) = +1.40 VThe reaction quotient Q can be calculated using the concentrations of the species involved:Q = [Fe2+] / [Pd2+]^2Substitute the values given:Q = (0.100 M) / (1.0×10^-5 M)^2 = 1.0×10^7Substitute all the values into the Nernst equation:Ecell = +1.40 V - (8.314 J/mol·K / (2 × 96,485 C/mol)) × ln(1.0×10^7)Ecell = +1.16 VOption A.

Learn more about calculated here:

brainly.com/question/21601855

#SPJ11

Sodium trinitride decomposes to sodium and nitrogen. What is the mass of nitrogen gas if you started with 48. 4 L of sodium trinitride at STP?

Answers

When 48.4 L of sodium trinitride at STP decomposes, the mass of nitrogen gas produced is approximately 60.48 grams which are calculated using the number of moles by the molar mass of nitrogen.

Sodium trinitride ([tex]Na_3N[/tex]) decomposes into sodium (Na) and nitrogen ([tex]N_2[/tex]) gas. To determine the mass of nitrogen gas produced, we need to use the ideal gas law and the molar mass of nitrogen.

First, we convert the given volume of sodium trinitride (48.4 L) into moles using the ideal gas law at standard temperature and pressure (STP). At STP, 1 mole of any ideal gas occupies 22.4 L. So, 48.4 L of sodium trinitride is equal to 48.4/22.4 = 2.16 moles.

Next, we look at the balanced chemical equation for the decomposition of sodium trinitride, which shows that for every 1 mole of [tex]Na_3N[/tex], 1 mole of [tex]N_2[/tex] gas is produced.

Therefore, since we started with 2.16 moles of [tex]Na_3N[/tex], we can conclude that 2.16 moles of [tex]N_2[/tex] gas will be produced. To find the mass of nitrogen gas, we multiply the number of moles by the molar mass of nitrogen, which is approximately 28 g/mol. Thus, the mass of nitrogen gas produced is 2.16 moles * 28 g/mol = 60.48 grams of nitrogen gas.

Learn more about ideal gas law here:

https://brainly.com/question/12624936

#SPJ11

a highly positive charged protein will bind a cation exchanger and elute off by changing the ph. (True or False)

Answers

The given statement "A highly positively charged protein will bind a cation exchanger and elute off by changing the pH" is true because cation exchangers contain negatively charged functional groups that attract positively charged molecules, such as highly positively charged proteins.

By changing the pH, the net charge of the protein can be altered, causing it to become less positively charged and therefore elute off the cation exchanger.

Proteins with a high isoelectric point (pI) will have a higher positive charge at pH values below their pI, allowing them to bind to the negatively charged cation exchanger.

By increasing the pH, the protein's net charge will become more negative, causing it to elute off the column. This process is called ion exchange chromatography and is widely used for protein purification in biochemistry and biotechnology.

For more questions like pH click the link below:

https://brainly.com/question/15289741

#SPJ11

What type of compound and bond is hydrolyzed by the following? a.alpha-amylase b.lipase

Answers

Alpha-amylase hydrolyzes alpha-1,4-glycosidic bonds in polysaccharides(starch and glycogen), while lipase hydrolyzes ester bonds in triglycerides (fats and oils).

Alpha-amylase is an enzyme that hydrolyzes the alpha-1,4-glycosidic bonds found in starch and glycogen. Starch and glycogen are polysaccharides made up of glucose units connected through alpha-1,4-glycosidic linkages. Alpha-amylase breaks these bonds, resulting in smaller polysaccharides or maltose units.

Lipase, on the other hand, is an enzyme that hydrolyzes ester bonds present in triglycerides (fats and oils). Triglycerides are composed of a glycerol molecule attached to three fatty acid chains through ester linkages. Lipase cleaves these ester bonds, releasing glycerol and free fatty acids.

Overall, both alpha-amylase and lipase play important roles in the breakdown and utilization of nutrients in the body, and are essential for maintaining overall health and well-being.

To learn more about Alpha-amylase visit:

https://brainly.com/question/30133117

#SPJ11

does a charged particle always moves in uniform circular motion if it's motion is initially perpendicular to the magnetic field.

Answers

Yes, a charged particle will move in uniform circular motion when its motion is initially perpendicular to the magnetic field.

1. When the charged particle enters the magnetic field, it experiences a magnetic force due to the interaction between its charge and the magnetic field.

2. This magnetic force is always perpendicular to both the velocity of the particle and the direction of the magnetic field.

3. Since the magnetic force is always perpendicular to the particle's motion, it causes the particle to change direction, but not speed.

4. As a result, the charged particle follows a circular path, with the magnetic force acting as the centripetal force, keeping it in uniform circular motion.

So, a charged particle with motion initially perpendicular to the magnetic field will indeed move in uniform circular motion due to the magnetic force acting on it.

Learn more about the circular motion here,

https://brainly.com/question/29312275

#SPJ11

Consider the titration of 50.0 mL of 0.200 M HNO3 with 0.100 M NaOH solution. What volume of NaOH is required to reach the equivalence point in the titration?
a. 25.0 mL
b. 50.0 mL
c. 1.00 × 10^2 mL
d. 1.50 × 10^2 mL

Answers

The volume of NaOH is (c) 1.00 × 10^2 mL.

The balanced chemical equation for the reaction between HNO3 and NaOH is: HNO3 + NaOH → NaNO3 + H2O

At the equivalence point, all the HNO3 will react with NaOH in a 1:1 molar ratio. This means that moles of HNO3 = moles of NaOH at the equivalence point.

The number of moles of HNO3 initially present in 50.0 mL of 0.200 M solution is:

moles of HNO3 = Molarity × Volume

moles of HNO3 = 0.200 mol/L × 0.0500 L

moles of HNO3 = 0.0100 mol

Therefore, the number of moles of NaOH required to reach the equivalence point is also 0.0100 mol.

The volume of 0.100 M NaOH required to provide 0.0100 mol is:

Volume of NaOH = moles of NaOH / Molarity of NaOH

Volume of NaOH = 0.0100 mol / 0.100 mol/L

Volume of NaOH = 0.100 L or 100 mL

the answer is (c) 1.00 × 10^2 mL.

For more such questions on volume

https://brainly.com/question/1183253

#SPJ11

The volume of NaOH is (c) 1.00 × 10^2 mL. The balanced chemical equation for the reaction between HNO3 and NaOH is: HNO3 + NaOH → NaNO3 + H2O

At the equivalence point, all the HNO3 will react with NaOH in a 1:1 molar ratio. This means that moles of HNO3 = moles of NaOH at the equivalence point.

The number of moles of HNO3 initially present in 50.0 mL of 0.200 M solution is:

moles of HNO3 = Molarity × Volume

moles of HNO3 = 0.200 mol/L × 0.0500 L

moles of HNO3 = 0.0100 mol

Therefore, the number of moles of NaOH required to reach the equivalence point is also 0.0100 mol.

The volume of 0.100 M NaOH required to provide 0.0100 mol is:

Volume of NaOH = moles of NaOH / Molarity of NaOH

Volume of NaOH = 0.0100 mol / 0.100 mol/L

Volume of NaOH = 0.100 L or 100 mL

the answer is (c) 1.00 × 10^2 mL.

Learn more about volume here:

brainly.com/question/1183253

#SPJ11

) which of the following is the most activating in electrophilic aromatic substitution? a.-no2 b.-nhcoch3 c.-cn d.-nh2

Answers

The most activating group in electrophilic aromatic substitution is (d) -NH[tex]_{2}[/tex].

In electrophilic aromatic substitution, the activating effect of a group is determined by its ability to donate electron density to the aromatic ring, making it more nucleophilic and facilitating the reaction. Among the given options, -NH[tex]_{2}[/tex] (an amino group) is the strongest electron-donating group. The lone pair of electrons on the nitrogen atom can delocalize into the ring through resonance, increasing the electron density and making the ring more nucleophilic.

Option (d) -NH[tex]_{2}[/tex] is the correct answer.

You can learn more about electrophilic aromatic substitution at

https://brainly.com/question/14803468

#SPJ11

tritium ( ) has a half-life of 12.3 years. how long will it take for a tritium sample to decay to one-eighth of its original activity?

Answers

It will take 36.9 years for a tritium sample to decay to one-eighth of its original activity.

Tritium has a half-life of 12.3 years, which means that the amount of tritium in a sample will be reduced by half every 12.3 years. To find out how long it will take for a tritium sample to decay to one-eighth of its original activity, we need to find the number of half-lives required for this reduction.

One-eighth of the original activity is equivalent to 3 half-lives of tritium, since (1/2)^3 = 1/8. Therefore, we can calculate the time required for this decay by multiplying the half-life by 3:

12.3 years/half-life x 3 half-lives = 36.9 years

Thus, it will take 36.9 years for a tritium sample to decay to one-eighth of its original activity.

learn more about tritium here:

https://brainly.com/question/13559964

#SPJ11

Balance the neutralization reaction of phosphoric acid with magnesium hydroxide. States of matter are not needed. __ H3PO4 + __ Mg(OH)2 → ___

Answers



The balanced neutralization reaction of phosphoric acid with magnesium hydroxide is:

2 H3PO4 + 3 Mg(OH)2 → Mg3(PO4)2 + 6 H2O



In order to balance the neutralization reaction of phosphoric acid with magnesium hydroxide, we need to make sure that the number of atoms of each element is the same on both sides of the equation.

First, let's write the unbalanced equation:

H3PO4 + Mg(OH)2 →

We have one atom of phosphorus (P) on the left-hand side and none on the right-hand side, so we need to add a coefficient of 2 to the phosphoric acid to get 2 atoms of phosphorus:

2 H3PO4 + Mg(OH)2 →

Now we have 6 atoms of hydrogen (H) and 2 atoms of phosphorus (P) on the left-hand side, and 2 atoms of magnesium (Mg), 2 atoms of oxygen (O), and 2 atoms of hydrogen (H) on the right-hand side.

To balance the equation, we need to add a coefficient of 3 to magnesium hydroxide to get 6 atoms of hydrogen (H) on the right-hand side:

2 H3PO4 + 3 Mg(OH)2 →

Now we have 2 atoms of magnesium (Mg), 6 atoms of oxygen (O), and 6 atoms of hydrogen (H) on both sides of the equation. However, we also have 2 atoms of phosphorus (P) on the left-hand side and none on the right-hand side.

To balance this, we need to add a coefficient of 1 to magnesium phosphate:

2 H3PO4 + 3 Mg(OH)2 → Mg3(PO4)2 + 6 H2O

Now the equation is balanced, with 2 atoms of phosphorus (P), 3 atoms of magnesium (Mg), 8 atoms of oxygen (O), and 12 atoms of hydrogen (H) on both sides of the equation.

learn more about phosphoric acid

https://brainly.com/question/14812997

#SPJ11

Here are some redox reactions. Calculate their cell potentials and indicate whether they are spontaneous or not (or one of the other choices). Use the reduction potential tables as needed (a) Cu(s) + Fe2+(aq) → Cu2+(aq) + Fe(s) Cell potential = The reaction is No idea Spontaneous Insufficient data to determine this With this potential, this reaction cannot occur Non-spontaneous (b) H2(g) + 2 Ag+(aq) → 2 H+(aq) + 2 Ag(s) Cell potential = The reaction is This reaction does not occur to any significant extent Insufficient data to determine No idea Non-spontaneous Spontaneous (c) Choose the strongest reducing agent among all the reactants and products in parts (a) and (b) Ag (aq) Cu(s) Ht(aq) Fe2+(aq) H2(g) Ag(s) Fe(s)

Answers

The cell potentials and spontaneity of the given redox reactions are as follows:

(a) Cell potential = +0.78 V, Reaction is spontaneous

(b) Cell potential = +0.80 V, Reaction is spontaneous.

(c) The strongest reducing agent is Ag(aq).

What is the spontaneity and cell potential of the provided redox reactions, and which species is the strongest reducing agent?

The cell potentials and spontaneity of the given redox reactions were determined using reduction potential tables. In the first reaction, Cu(s) + [tex]Fe_2+(aq) → Cu_2+(aq) + Fe(s)[/tex], the calculated cell potential is +0.78 V, indicating that the reaction is spontaneous. Conversely, in the second reaction, [tex]H_2[/tex](g) + 2 Ag+(aq) → 2 H+(aq) + 2 Ag(s), the cell potential is +0.80 V, confirming its spontaneity. Among all the reactants and products in both reactions, Ag(aq) is identified as the strongest reducing agent, based on its highest reduction potential of +0.80 V

Redox reactions involve the transfer of electrons between species, and their spontaneity can be determined by calculating the cell potential. The positive cell potential indicates a spontaneous reaction, while a negative value signifies a non-spontaneous one. Reduction potential tables provide the necessary information to calculate the cell potential. The stronger reducing agent has a higher reduction potential, indicating its ability to donate electrons more readily. Understanding these concepts helps predict the feasibility and directionality of redox reactions.

Learn more about Redox reaction

brainly.com/question/28300253

#SPJ11

a solution is made by mixing 7.25 g CaCl2 with enough water to make 150 mL of solution. what is the molarity

Answers

A solution is made by mixing 7.25 g CaCl[tex]_2[/tex] with enough water to make 150 mL of solution. 0.433M is the molarity.

The amount of a material in a solution expressed as a proportion of its volume is referred to as "molar concentration" in chemistry. Molarity, amount concentration, and substance concentration are other terms that can be used to describe it. The most common unit used in chemistry to express molarity is the number of moles per litre, which is represented by the unit signs mol/L and mol/dm³ in SI units. One mol/L is the definition of one molar, and 1 M, of a solution's concentration.

Molarity is calculated as follows: moles per litre of solution

number of moles = 7.25/ 110.98

                           = 0.065

150 mL/1000= 0.15L

Molarity =  0.065 /0.15

                =0.433M

To know more about molarity, here:

brainly.com/question/31545539

#SPJ1

Read more on Brainly.com - https://brainly.com/question/32360461#readmore

Reactions of Ethers and Epoxides 18-44 Predict the products of the following ether cleavage reactions: (a) (b) CH3 CH2CH3 CF3CO2H H20 2 H3C CH3 HI 7 (c) CH3 H2C=CH-0-CH2CH3 HI H2O ? (d) CH3CCH2-O-CH2CH3 CH3 HI H20 ?

Answers

The product would be: a. [tex]CH_3CH_2^+ + CH_3CH_2OH + CF_3CO^{2-}[/tex]

b. [tex]H_3C-I + CH_3CH_2-I + H_2O[/tex]

c. [tex]H_3CCH_2OH + CH_3CH_2I[/tex]

d. [tex]CH_3CCH_2OH + CH_3CH_2I[/tex]

(a) The reaction of an ether with a strong acid like [tex]CF_3CO_2H[/tex] can lead to the cleavage of the ether bond and the formation of two carbocations. In this case, the product would be:

[tex]CH_3CH_2^+ + CH_3CH_2OH + CF_3CO^{2-}[/tex]

(b) The reaction of an ether with HI can lead to the cleavage of the ether bond and the formation of two alkyl halides. In this case, the product would be:

[tex]H_3C-I + CH_3CH_2-I + H_2O[/tex]

(c) The reaction of an ether with HI and subsequent reaction with water can lead to the formation of an alcohol and an alkyl halide. In this case, the product would be:

[tex]H_3CCH_2OH + CH_3CH_2I[/tex]

(d) The reaction of an ether with HI and subsequent reaction with water can lead to the formation of an alcohol and an alkyl halide. In this case, the product would be:

[tex]CH_3CCH_2OH + CH_3CH_2I[/tex]

Note that in both (c) and (d), the reaction can proceed via an SN1 mechanism in which the leaving group (the ether oxygen) departs to form a carbocation intermediate.

The carbocation can then react with the nucleophilic iodide ion to form the alkyl halide, while the protonated alcohol can undergo deprotonation to form the final alcohol product.

For more question on product click on

https://brainly.com/question/16859279

#SPJ11

CORRECT QUESTION

CLICK IMAGE

(a) Acid-catalyzed hydrolysis reaction

(b) Nucleophilic substitution reaction

(c) Nucleophilic substitution reaction

(d) Acid-catalyzed hydrolysis reaction

When it comes to predicting the products of ether cleavage reactions, it's important to consider the specific conditions of each reaction. Here are the predictions for the reactions you provided:

(a) CH3 CH2CH3 CF3CO2H H20 2 H3C CH3
This is an acid-catalyzed hydrolysis reaction, which will break the ether bond and form two alcohol products. The specific products will depend on the specific ether being cleaved, but in general, the products will be a primary alcohol (CH3CH2OH) and a tertiary alcohol (H3CCH3OH).

(b) HI 7
This is a classic example of a nucleophilic substitution reaction, in which the iodide ion (I-) acts as a nucleophile and attacks the ether carbon to break the bond and form an alkyl iodide product. In this case, the products will be H3CCH2I and CH3I.

(c) CH3 H2C=CH-0-CH2CH3 HI H2O
This reaction is also a nucleophilic substitution reaction, but the specific conditions are different. In this case, the hydroxide ion (OH-) from water acts as a nucleophile to attack the ether carbon and break the bond. The products will be H3CCH=CH2 (an alkene) and CH3OH (a primary alcohol).

(d) CH3CCH2-O-CH2CH3 CH3 HI H20
This is another acid-catalyzed hydrolysis reaction, similar to part (a). The ether bond will be broken and two alcohol products will be formed. The specific products will depend on the specific ether being cleaved, but in general, the products will be a primary alcohol (CH3CH2OH) and a secondary alcohol (CH3CH2CH2OH).

Learn more about nucleophilic substitution reaction, and acid-catalyzed hydrolysis reaction  click here:

https://brainly.com/question/23970995

#SPJ11

how many joules of heat must be removed to lower the temperature of a 36.5 g al bar from 84.1 °c to 56.8 °c? the specific heat of al is 0.908 j/g °c. group of answer choices 240 j 1090 j 905 j 581 j

Answers

The amount of heat that must be removed to lower the temperature of the aluminum bar from 84.1 °C to 56.8 °C is 1090 J.

The formula for calculating heat energy (Q) is given as Q = m × c × ΔT. This formula relates the amount of heat energy transferred to a substance with the mass, specific heat capacity, and temperature change of the substance. In this question, we are given the mass of the aluminum bar (m = 36.5 g), the specific heat capacity of aluminum (c = 0.908 J/g °C), and the change in temperature (ΔT = 84.1 °C - 56.8 °C = 27.3 °C). By substituting these values in the formula, we can calculate the amount of heat energy (Q) that must be removed to lower the temperature of the aluminum bar. The answer is 1090 J.

The specific heat capacity of a substance is the amount of heat energy required to raise the temperature of one gram of the substance by one degree Celsius. It is given in units of joules per gram per degree Celsius (J/g °C). The specific heat capacity of aluminum is 0.908 J/g °C. This means that it requires 0.908 joules of heat energy to raise the temperature of one gram of aluminum by one degree Celsius. By knowing the specific heat capacity of aluminum, we can use the formula Q = m × c × ΔT to calculate the amount of heat energy required to change the temperature of the aluminum bar by a certain amount.
To know more about aluminum visit:

https://brainly.com/question/9496279

#SPJ11

what is the coefficient for oh−(aq) when mno4−(aq) fe2 (aq) → mn2 (aq) fe3 (aq) is balanced in basic aqueous solution?

Answers

The coefficient for OH- (aq) in the balanced equation in basic aqueous solution is 12.

To balance this equation in basic aqueous solution, we first balance the atoms that are not hydrogen or oxygen. We start by balancing the Fe atoms on both sides, which requires multiplying Fe2+ on the reactant side by 3 to get 3Fe2+. Next, we balance the Mn atoms on both sides, which requires multiplying MnO4- on the reactant side by 2 to get 2MnO4-.
The balanced equation in basic solution is:
2MnO4- + 6Fe2+ + 8OH- → 2Mn2+ + 6Fe3+ + 4H2O
To find the coefficient for OH- (aq), we look at the number of OH- ions on both sides of the equation. On the reactant side, there are 8 OH- ions. On the product side, there are 4 H2O molecules, each of which contains 2 H+ ions and 1 OH- ion, so there are a total of 8 H+ ions and 4 OH- ions.
To balance the OH- ions, we add 4 OH- ions to the reactant side to get a total of 12 OH- ions, and the balanced equation in basic solution is:
2MnO4- + 6Fe2+ + 12OH- → 2Mn2+ + 6Fe3+ + 4H2O
Therefore, the coefficient for OH- (aq) in the balanced equation in basic aqueous solution is 12.

learn more about solution

https://brainly.com/question/1024087

#SPJ11

a mixture of 9 mol f2 and 4 moles of Sis allowed to react. This equation represents the reaction that takes place.3F2+S→SF6How many moles of F2remain after 3 moles of Shave reacted?

Answers

To answer this question, 3 moles of F2 will remain after 3 moles of S have reacted in this mixture of 9 mol F2 and 4 moles of S.

we first need to figure out how many moles of S will react with 9 moles of F2. From the balanced chemical equation, we see that for every 1 mole of S, 3 moles of F2 are required. So, for 4 moles of S, we would need 12 moles of F2.
Now that we know the amount of F2 required to react with all of the S, we can subtract the 3 moles of S that have reacted from the 9 moles of F2 that were originally present. This gives us:
9 moles F2 - 12 moles F2 (required to react with 4 moles S) = -3 moles F2
This negative result tells us that there is not enough S to react with all of the F2, and therefore, some of the F2 will remain unreacted. Specifically, there will be 3 moles of F2 remaining after 3 moles of S have reacted.
In conclusion, 3 moles of F2 will remain after 3 moles of S have reacted in this mixture of 9 mol F2 and 4 moles of S.

To know more about moles visit :

https://brainly.com/question/14676971

#SPJ11

enter the net ionic equation for the reaction of aqueous sodium chloride with aqueous silver nitrate. express your answer as a chemical equation. view available hint(s)

Answers

Answer;The net ionic equation for the reaction of aqueous sodium chloride with aqueous silver nitrate is:

Ag+ (aq) + Cl- (aq) → AgCl (s)

In this reaction, the silver cation (Ag+) from the silver nitrate reacts with the chloride anion (Cl-) from the sodium chloride to form solid silver chloride (AgCl) as a precipitate. The net ionic equation shows only the species that participate in the reaction, which are the ions that undergo a change in oxidation state or form a precipitate.

The complete ionic equation for the reaction is:

Na+ (aq) + Cl- (aq) + Ag+ (aq) + NO3- (aq) → Na+ (aq) + NO3- (aq) + AgCl (s)

This equation shows all the ions present in the reaction, both the reactants and the products, in their ionic forms. However, it also includes spectator ions (Na+ and NO3-) that do not participate in the reaction and remain unchanged.

Learn more about net ionic equations and ionic reactions.

https://brainly.com/question/29116785?referrer=searchResults

#SPJ11

how might a reductive amination be used to synthesize penbutolol, an amino alcohol pharmaceutical derived from propanolamine? g

Answers

Reductive amination be used to synthesize penbutolol, an amino alcohol pharmaceutical derived from propanolamine.

Reductive amination is described as a process which is also known by the name of reductive alkylation. This is described as a form of amination that is marked with carbonyl group conversion.

Penbutolol, an amino alcohol pharmaceutical, can be synthesized using reductive amination by starting with propanolamine. The reductive amination process involves the condensation of propanolamine with an appropriate aldehyde followed by the reduction of the imine intermediate to form the desired amino alcohol. Here's a step-by-step explanation of the synthesis:

Acylation of Propanolamine: Propanolamine is first acylated to protect the amino group. This is typically done by reacting propanolamine with an acylating agent such as acetic anhydride or acetyl chloride. The reaction forms the corresponding N-acyl propanolamine.

Formation of the Iminium Ion:  The N-acyl propanolamine is then reacted with an appropriate aldehyde, such as benzaldehyde, in the presence of an acid catalyst, typically HCl or H2SO4. The reaction forms an iminium ion intermediate, which is a Schiff base.

Reduction to Amino Alcohol: The iminium ion intermediate is then reduced to the desired amino alcohol, penbutolol. This reduction step is typically achieved using a reducing agent like sodium cyanoborohydride (NaBH3CN) or sodium triacetoxyborohydride (NaBH(OAc)3). The reduction converts the iminium ion into the amine, resulting in the formation of penbutolol.

Deprotection:  Finally, if any protecting groups were introduced in step 1 to protect the amino group, they can be removed using appropriate deprotecting conditions. The resulting compound is penbutolol, an amino alcohol pharmaceutical derived from propanolamine.

It's important to note that the specific reaction conditions, reagents, and protecting groups may vary depending on the synthetic protocol and the desired purity of the final product.

To know more about Penbutolol:

https://brainly.com/question/14090801

#SPJ4

--The given question is incomplete, the complete question is:

"How might a reductive amination be used to synthesize Phenylpropanolamine, an amino alcohol pharmaceutical derived from propanolamine? Draw the structure of the aldehyde/ketone and the amine that would be used to synthesize this compound."--

2.66 g of a gas that occupies 1.98 l at 0 ∘c and 1.00 atm (stp). express your answer with the appropriate units.

Answers

The given gas has a volume of 1.98 L at STP, which means it is at a temperature of 0°C (273.15 K) and a pressure of 1.00 atm. To calculate the number of moles of gas present, we need to use the STP conditions.

First, we can calculate the number of moles of gas present at STP using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. At STP, P = 1 atm, V = 22.4 L (the molar volume at STP), R = 0.08206 L atm mol^-1 K^-1, and T = 273.15 K.

Plugging in the values, we get:

1 atm x 22.4 L = n x 0.08206 L atm mol^-1 K^-1 x 273.15 K

n = (1 atm x 22.4 L) / (0.08206 L atm mol^-1 K^-1 x 273.15 K)

n = 1.00 mol

This means that 1 mole of the gas occupies 22.4 L at STP.

Now, we can use the number of moles to find the mass of the gas present. The given mass is 2.66 g, so:

mass = n x molar mass

where molar mass is the mass of one mole of the gas. Let's assume the gas is an ideal gas, and use the ideal gas equation to calculate its molar mass:

PV = nRT

n = PV / RT

n = (1 atm x 1.98 L) / (0.08206 L atm mol^-1 K^-1 x 273.15 K)

n = 0.0878 mol

Now we can calculate the molar mass:

molar mass = mass / n

molar mass = 2.66 g / 0.0878 mol

molar mass = 30.31 g mol^-1

Therefore, the gas has a molar mass of 30.31 g mol^-1.

Note that the appropriate units for volume are liters (L), and for pressure are atmospheres (atm). The appropriate units for mass are grams (g), and for molar mass are grams per mole (g mol^-1).

learn more about STP

https://brainly.in/question/4028492?referrer=searchResults  

#SPJ11

Starting with 1.550 g of potassium chlorate, a student releases 0.617 g of oxygen gas. If the calculated mass of oxygen gas is 0.607 g, what is the percent yield? A) 39.2% B) 39.8% C) 98.4% D) 102%

Answers

The percent yield can be calculated by dividing the actual yield (0.607 g) by the theoretical yield (0.617 g) and multiplying by 100. The percent yield is option(c) 98.4%.

Percent yield is a measure of the efficiency of a chemical reaction, representing the ratio of the actual yield to the theoretical yield expressed as a percentage. In this case, the theoretical yield is the calculated mass of oxygen gas, which is given as 0.617 g.

To calculate the percent yield, divide the actual yield (0.607 g) by the theoretical yield (0.617 g) and multiply by 100:

Percent yield = (Actual yield / Theoretical yield) * 100

= (0.607 g / 0.617 g) * 100

= 98.4%

Therefore, the percent yield is 98.4%, which means that 98.4% of the expected amount of oxygen gas was obtained in the reaction.  

Learn more about chemical reaction here:

https://brainly.com/question/22817140

#SPJ11

What is the equilibrium constant expression for the reaction below? 2 CaSO4(s) 2 Ca0(s) + 2 SO2(g) + O2(g) a. Kc= [CaO)/[CaSO4] Kc= [SO2]2[02] b. d. Kc= [S02][02] e. Kc=1/5012[O2]

Answers

The answer to the question is option d. The equilibrium constant expression for the given reaction is Kc= [S02][02].

The equilibrium constant expression is a mathematical representation of the ratio of product concentrations to reactant concentrations at equilibrium. In this reaction, the products are CaO, SO2, and O2, and the reactant is CaSO4.

The balanced chemical equation for the reaction is 2 CaSO4(s) → 2 CaO(s) + 2 SO2(g) + O2(g). Using this equation, we can write the expression for the equilibrium constant (Kc) as follows:

Kc= [CaO]^2[SO2][O2]/[CaSO4]^2

However, we can simplify this expression by noting that the concentration of CaO and CaSO4 are solid and therefore constant. Therefore, we can remove them from the expression, leaving us with:

Kc= [SO2][O2]/[CaSO4]^2

Further simplifying the expression, we get option d:

Kc= [S02][02]

To learn more about equilibrium constant visit:

brainly.com/question/10038290

#SPJ11

which of the following solutions would have the highest osmotic pressure?
a) 0.45 m c6h12o6
b) 0.15 m cabr2
c) 0.25 m libr
d) 0.25 m nh3
e) 0.20 m li2so4

Answers

The solution with the highest osmotic pressure would be:

a) 0.45 M C6H12O6 (glucose)

How does the concentration affect osmotic pressure?

Osmotic pressure is a colligative property that depends on the concentration of solute particles in a solution. The greater the concentration of solute particles, the higher the osmotic pressure. Osmotic pressure arises due to the tendency of solvent molecules to move from an area of lower solute concentration to an area of higher solute concentration through a semipermeable membrane.

Among the given options, glucose (C6H12O6) is a non-ionic solute that dissociates into individual particles in solution. The solution with the highest concentration of glucose (0.45 M) would have the highest osmotic pressure because it contains more solute particles per unit volume.

Osmotic pressure is an important factor in biological systems, industrial processes, and various scientific applications. Understanding osmotic pressure helps in comprehending osmosis, biological fluid balance, and the behavior of solutions in different environments.

Learn more about Osmotic pressure

brainly.com/question/29819107

#SPJ11

Calculate the pH of a solution containing 0.0347 M glutaric acid and 0.020 M potassium hydrogen glutarate. The Ka values for glutaric acid are 4.52 × 10-5 (Ka1) and 3.78 × 10-6 (Ka2).

Answers

The solution contains 0.0347 M glutaric acid and 0.020 M potassium hydrogen glutarate, and has a pH of 3.16. The Ka values of glutaric acid were used to calculate the concentration of [H+] in the solution, and the pH was determined using the equation pH = -log[H+].

To solve this problem, we first need to determine which acid dissociation reactions are occurring in the solution. Glutaric acid has two acid dissociation constants, so we need to consider both reactions:
Ka1 = [H+][C5H8O4-]/[C5H9O4-]
Ka2 = [H+][C5H7O4-]/[C5H8O4-]
We can assume that the dissociation of glutaric acid is minimal, so we can simplify our calculations by assuming that [C5H9O4-] ≈ [C5H8O4-]. Therefore, we can write the following equation:
Ka1 = [H+]^2/[C5H8O4-]
Rearranging this equation gives us:
[H+] = sqrt(Ka1*[C5H8O4-])
Now, we need to calculate the concentrations of glutaric acid and potassium hydrogen glutarate in the solution. We know that the total concentration of acid is 0.0347 M + 0.020 M = 0.0547 M. Therefore, the concentration of [C5H8O4-] is 0.020 M. We can assume that the potassium hydrogen glutarate does not contribute to the acidity of the solution, so we can ignore it in our calculations.
Plugging in our values, we get:
[H+] = sqrt(4.52 × 10^-5 * 0.020) = 6.83 × 10^-4 M
The pH of the solution can be calculated using the following equation:
pH = -log[H+]
pH = -log(6.83 × 10^-4) = 3.16
Therefore, the pH of the solution is 3.16.
In conclusion, the solution contains 0.0347 M glutaric acid and 0.020 M potassium hydrogen glutarate, and has a pH of 3.16. The Ka values of glutaric acid were used to calculate the concentration of [H+] in the solution, and the pH was determined using the equation pH = -log[H+].

To know more about solutions visit: https://brainly.com/question/30620786

#SPJ11

what is the volume of a 6.21 g sample of chloroform (d = 1.49 g/ml)?

Answers

The volume of a 6.21 g sample of chloroform with a density (d) of 1.49 g/ml is 4.16 ml.

We can use the formula:

density = mass/volume

to find the volume of the chloroform sample.

Rearranging the formula, we get:

volume = mass/density

Substituting the given values, we get:

volume = 6.21 g / 1.49 g/ml

Simplifying the expression, we get:

volume = 4.16 ml

Therefore, the volume of the chloroform sample is 4.16 ml.

Chloroform is a colorless, heavy, and sweet-smelling liquid that is used as a solvent and in the production of refrigerants and propellants. It is also used as a general anesthetic and in the production of various pharmaceuticals and agricultural chemicals. Chloroform is denser than water, with a density of 1.49 g/mL at room temperature. The density of a substance is defined as its mass per unit volume, and it is usually expressed in grams per milliliter (g/mL) or grams per cubic centimeter (g/cm³). The volume of a substance can be calculated by dividing its mass by its density. In the given problem, we used the mass of the chloroform sample and its density to calculate its volume.

learn more about Volume here:

https://brainly.com/question/17409636

#SPJ11

account for the relative rates of solvolysis (reaction with a protic solvent) of these compounds through an sn1 mechanism.

Answers

The relative rates of solvolysis via an SN1 mechanism are determined by both the stability of the carbocation intermediate and the nature of the leaving group.

The relative rates of solvolysis through an SN1 mechanism are primarily determined by the stability of the intermediate carbocation formed during the reaction. More stable carbocations are formed more easily, which results in faster reaction rates.

In general, tertiary alkyl halides form more stable carbocations compared to secondary or primary alkyl halides. This is due to the increased number of alkyl groups attached to the carbon bearing the leaving group.

The electron-donating effect of these groups leads to greater positive charge delocalization, which stabilizes the carbocation intermediate.

Therefore, tertiary alkyl halides will generally have the fastest rates of solvolysis via an SN1 mechanism, followed by secondary and primary alkyl halides. This trend is consistent with experimental data.

Additionally, the nature of the leaving group also plays a role in the rate of solvolysis. Leaving groups that are better able to stabilize negative charge, such as iodide, tend to promote faster reaction rates compared to leaving groups that are weaker in this regard, such as bromide or chloride.

For more question on solvolysis visit:

https://brainly.com/question/21796580

#SPJ11

The pH of a 0.051 M weak monoprotic acid is 3.35. Calculate the Ka of the acid.
Ka = ( Enter your answer in scientific notation.)

Answers

The Ka of the weak monoprotic acid is 3.98 x 10⁻⁵.

To calculate the Ka of a weak monoprotic acid, we can use the given pH and molarity. Here is the formula:

Ka = [H⁺][A⁻]/[HA]

Given the pH of 3.35, we can first find the concentration of H⁺ ions:

[H⁺] = 10^(-pH) = 10^(-3.35) ≈ 4.47 x 10⁻⁴ M

Since it's a weak monoprotic acid, we can assume that the concentration of A⁻ is equal to the concentration of H⁺:

[A⁻] = 4.47 x 10⁻⁴ M

Now, we can find the concentration of HA, the undissociated weak acid:

[HA] = 0.051 M - [A⁻] = 0.051 - 4.47 x 10⁻⁴ ≈ 0.0505 M

Now, we can use the Ka formula:

Ka = (4.47 x 10⁻⁴)² / 0.0505 ≈ 3.98 x 10⁻⁵

Therefore, the Ka of the acid is approximately 3.98 x 10⁻⁵.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ11

consider a substance with a melting point of 176 k. if this substance is in a container at 115 k what will the value be for ∆suniv for the process of melting this substance, in kj? (∆hfus= 239 kj/mol)

Answers

we need to use the formula for Gibbs free energy change (∆G) which is:∆G = ∆H - T∆S ∆H is the enthalpy change, T is the temperature in Kelvin, and ∆S is the entropy change.

we know that the substance has a melting point of 176 K, which means that at temperatures below this point, the substance is a solid and above this point, it is a liquid. We also know that the substance has a heat of fusion (∆Hfus) of 239 kJ/mol.

∆suniv for the melting process, we need to consider both the entropy change (∆S) and the enthalpy change (∆H). The entropy change for the melting process can be calculated using the equation

To know more about Kelvin visit:

https://brainly.com/question/28938811

#SPJ11

[Co(NH3)5(ONO)]Cl2 and [Co(NH3)5(NO2)]Cl2 form a pair of structural isomers. Explain why you would see a different wavelength maximum for ONO- and NO2-.

Answers

The complex ions [Co(NH3)5(ONO)]2+ and [Co(NH3)5(NO2)]2+ are isomers because they have the same chemical formula but different bonding arrangements.

The difference in bonding arises from the different geometries of the two ligands, which in turn affects the electronic structure of the complex.

The NO2- ligand is a strong-field ligand, which means that it forms a bond with the metal ion that is primarily covalent in nature. This leads to a larger splitting of the d orbitals of the metal ion, resulting in a lower energy of the d-orbital electrons. As a consequence, the absorption spectrum of the [Co(NH3)5(NO2)]2+ complex will have a lower wavelength maximum.

On the other hand, the ONO- ligand is a weak-field ligand, which forms a predominantly ionic bond with the metal ion. This results in a smaller splitting of the d orbitals and a higher energy of the d-orbital electrons. As a result, the absorption spectrum of the [Co(NH3)5(ONO)]2+ complex will have a higher wavelength maximum.

In summary, the difference in bonding between the two isomers leads to different electronic structures and therefore different absorption spectra, with the [Co(NH3)5(NO2)]2+ complex having a lower wavelength maximum and the [Co(NH3)5(ONO)]2+ complex having a higher wavelength maximum.

To know more about isomers:

https://brainly.com/question/13422357

#SPJ11

Other Questions
What is the mode of the data represented in this line plot?Enter your answer in the box.5 - xx6 - xxxx7 - xxx8 - xxxxxx9 - xx10 - xxxx11 - xx In an ambidextrous firm, if too much focus is placed on ________, the firm will suffer low profitability in the short run.A.alignmentB.adaptabilityC.structureD.opportunities Estimate then find the product 3412 A (17cm X 17cm) square loop lies in the xy plane The magnetic field in this region of space is B=(0.31t i + 0.55t^2 k)T where t is in seconds.1) What is the E induced loop at 0.5s2)What is the E induced loop at 1.0sExpress your answer to two significant figures and include the appropriate units. Function gg can be thought of as a scaled version of ()=2f(x)=x 2 f, left parenthesis, x, right parenthesis, equals, x, squared.A parabola labeled f represents the equation y equals x squared. A parabola labeled g passes through the point negative 1, 4, through the origin, and through the point 1, 4.Write the equation for ()g(x)g, left parenthesis, x, right parenthesis. calculate pba when 50.00 ml 0.1 m edta Brett also likes to keep track of the approximate amount he has billed clients.In cell B18, enter a formula using the ROUND and SUM functions that totals the invoice amounts (the range D6:D15) and rounds the result to 0 decimal places true/false. the intent of the ada is to prevent discrimination against qualified people with disabilities in employment, public services, transportation, public accommodations, and telecommunications services. Which aspect of Dore's illustration most clearly differs from Dante's text? A. Lucifer has only one face. B. Lucifer chews on sinners. C. Lucifer is depicted as a giant. D. Lucifer emerges from ice. A College of Engineering freshman is required to purchase a notebook PC upon or before enrollment. Two competing models are available through the college at the same attractive, discounted price. Both models meet the minimum performance specifications of the college, and they have identical warranty plans. They also have identical weights and footprints. What economic criterion should the freshman use in selecting which PC to buy T/F : zooplankton can remain small or mature to nekton and benthos. calculate the number of vibrational normal modes in methanol, ch3oh. A microscope with a tube length of 180 mm achieves a total magnification of 400 with a 40 objective and a 10 eyepiece. The microscope is focused for viewing with a relaxed eye.How far is the sample from the objective lens? a pilot of any proposed solution should be seriously considered when: the national electric code specifies a maximum current of 10 a in 16- gauge (0.129 cm diameter) copper wire. what is the corresponding current density? Which of the following systems have a microscopic property of matter that allows an external magnetic field to cause observable, macroscopic effects on them? Select two we AA plasma, which is classified as a very hot gas of randomly moving positively and negatively charged particles A block of wood, which is composed of particles that are spaced such that the block is classified as having a large density A pile of iron filings, which are composed of particles such that the iron filings are classified as metal D A container of water, which is composed of particles that are arranged such that the form of matter is classified as a fuld let z and w be complex numbers with |z| = 9 and |w| = 6. use this information in parts (a)-(c). a series of short plays depicting religious history from creation through doomsday Explain how the Appalachian mountains were formed and how they have become so much smaller over time?Please Determine the ph of a 1.82 m naf solution. the ka of hf is 6.710^-4.