a second chemist repeated the three experiments and observed that the reaction rates were considerably greater than those measured by the first chemist, even though the concentrations of the reactants and the temperature in the laboratory were the same as they were for the first chemist. which of the following is the best pairing of a claim about a most likely cause for the greater rates measured by the second chemist and a valid justification for that claim?
A. The pressures of the gases used by the second chemist must have been lower than those used by the first A) chemist, thus the collisions between reacting particles were less frequent than they were in the first chemist's experiments. B. The pressures of the gases used by the second chemist must have been lower than those used by the first chemist, thus the number of collisions with sufficient energy to cause reaction was lower than it was in the first chemist's experiments.
C. The second chemist must have added a catalyst for the reaction, thus providing a different reaction pathway for the reactant particles to react with an activation energy that was lower than that of the uncatalyzed reaction in the first chemist's experiments. D. The second chemist must have added a catalyst for the reaction, thus providing energy to reactant particles to increase their rate of reaction compared to their rate of reaction in the first chemist's experiments.

This is because limestone is a relatively soft and porous rock that is not able to withstand extreme temperatures and rapid changes in temperature that occur during calcination.

Limestone is a sedimentary rock composed mostly of calcium carbonate, which is a mineral that forms from the accumulation of skeletal remains of marine organisms such as coral and shells. It is one of the most common types of rocks on Earth and is found in a variety of colors, including white, gray, and beige.

Limestone is formed in shallow marine environments and can be found in various geological formations, including reefs, cliffs, and caves. It is often used as a building material because it is relatively easy to work with and has a natural beauty that can add to the aesthetic value of a structure. Limestone is also used in a variety of other applications, including as a raw material in the production of cement, as a soil conditioner in agriculture, and as a component in industrial processes such as steelmaking.

To learn more about Limestone visit here:

brainly.com/question/30717890

#SPJ4

To change the vapor pressure to 752 mmHg, 27.8 g of sucrose (C12H22O11) must be added to 500 g of water at 100C.

Vapor pressure of a solution is affected by the presence of solutes in the solution. The relationship between vapor pressure lowering and concentration of a non-volatile solute in a solvent is described by Raoult's law.

It states that the vapor pressure of a solution is equal to the mole fraction of the solvent multiplied by the vapor pressure of the pure solvent, P₀. Hence, Pᵥ = P₀ x Xw

where, Pᵥ = vapor pressure of the solution Xw = mole fraction of the solvent P₀ = vapor pressure of the pure solvent

Therefore, P₀ - Pᵥ = P₀ x (1 - Xw)

This equation can be used to calculate the vapor pressure lowering of a solution relative to the pure solvent. By definition, the mole fraction of the solvent is given by

Xw = number of moles of solvent / total number of moles of solute and solvent.

Since we assume that the volume of the solution is 500 g of water + m g of sucrose, where m is the mass of sucrose, we can write

0.752 atm x 760 mmHg / atm = P₀ x (500 g / (500 g + m))

m= 27.8g

Therefore, we have m = 27.8 g of sucrose.

To know more about vapor pressure, refer here:

https://brainly.com/question/11864750#

#SPJ11

Precipitate production, gas evolution, heat release or absorption, a change in colour or odour, and the creation of a new material are all examples of chemical reaction evidence.

Atoms can rearrange themselves or new chemical connections can be created during a chemical reaction. One or more of the observable indicators listed below are typically present along with these changes:

Precipitate formation: A precipitate is a solid that develops from a chemical reaction in a solution. It is an obvious sign that a chemical reaction has occurred. Gas evolution: A chemical reaction can be detected by the emergence of gas bubbles, effervescence, or foaming. Heat production or absorption might indicate a chemical reaction by changing the temperature. Although an endothermic process takes in heat, an exothermic reaction releases heat. A change in colour or smell is frequently an indication of a chemical reaction. development of a brand-new substance A new substance or substances are created as a result of a chemical reaction that are chemically different from the original substance (s). Any of these symptoms will exist if a chemical reaction has taken place. However, because some reactions may be sluggish or fail to create any noticeable changes, the absence of these indicators does not always imply that a reaction has not taken place.

learn more about chemical reaction here:

https://brainly.com/question/29039149

#SPJ4

The pH in the intermembrane space of the mitochondria should be lower compared to the matrix due to the C. higher concentration of protons in the intermembrane space.

Mitochondria are organelles found in eukaryotic cells that play a vital role in producing the energy required to sustain cellular activity. Mitochondria produce energy from food and oxygen, which they use to generate ATP, the primary source of cellular energy.

The intermembrane space (IMS) is the region between the mitochondrial inner and outer membranes. The pH of the intermembrane space is significantly lower than that of the matrix due to the higher concentration of protons in the intermembrane space.

The pH gradient of the mitochondria enables the generation of ATP from ADP and Pi by ATP synthase, which pumps protons from the intermembrane space to the matrix, making the pH gradient a source of energy. The proton gradient generated by ATP synthase is used for ATP synthesis. Therefore, the pH in the intermembrane space of mitochondria should be lower compared to the matrix due to the higher concentration of protons in the intermembrane space.

To know more about mitochondria:

https://brainly.com/question/29763308

#SPJ11

In the fasted state, fatty acyl-CoA is transported across the mitochondrial membrane. The transport of fatty acids via carnitine palmitoyltransferase I (CPTI) can be directly inhibited by Malonyl-CoA.

Malonyl-CoA- Malonyl-CoA is a metabolite found in all living organisms, including humans. It is a molecule produced by the carboxylation of acetyl-CoA and is the first intermediate in fatty acid biosynthesis. Malonyl-CoA is a potent inhibitor of carnitine palmitoyltransferase I (CPTI), which is found on the outer mitochondrial membrane.

Carnitine palmitoyltransferase I- Carnitine palmitoyltransferase I (CPTI) is a crucial enzyme that controls the transportation of long-chain fatty acids into the mitochondria, where they undergo β-oxidation to produce energy. CPTI is located on the outer mitochondrial membrane and is responsible for catalyzing the rate-limiting step in fatty acid oxidation.

Function of β-oxidation- β-oxidation is a metabolic process in which fatty acids are broken down into acetyl-CoA molecules, which can then enter the citric acid cycle and produce energy. The process occurs in the mitochondria, and it begins with the activation of the fatty acid to a fatty acyl-CoA by fatty acyl-CoA synthetase.

The fatty acyl-CoA is then transported across the mitochondrial membrane via carnitine palmitoyltransferase I (CPTI) and is broken down through a series of reactions by β-oxidation enzymes. Finally, the resulting acetyl-CoA molecules enter the citric acid cycle and are oxidized to produce ATP.

To learn more about "mitochondrial membrane", visit:  https://brainly.com/question/13912115

#SPJ11

If you started with 1.5 moles of H2 at STP, you would have approximately 33.6 liters of volume of hydrogen (H₂) gas.

To determine the number of liters of H2 you have, we need to consider the conditions under which the gas is being held (i.e. temperature and pressure), as well as the molar volume of H2 at those conditions.

At standard temperature and pressure (STP), which is 0°C (273.15 K) and 1 atm (101.325 kPa), the molar volume of any ideal gas is approximately 22.4 L/mol.

Therefore, at STP, 1.5 moles of H₂ would occupy approximately:

V = n x Vm = 1.5 mol x 22.4 L/mol = 33.6 L

Learn more about volume of gas here: https://brainly.com/question/25736513

#SPJ1

The complete question is below:

HOW MANY LITERS OF H2 DO YOU HAVE IF YOU START WITH 1.5 MOLES OF H2? (assume STP condition)

Antibodies against nicotinic acetylcholine receptors (nAChR), present at neuromuscular junction (NMJ), can affect function of junction by interfering with normal signaling between nerve and muscle.

Antibodies against nicotinic acetylcholine receptors (nAChR), which are present at neuromuscular junction (NMJ), can affect the function of junction by interfering with normal signaling between nerve and muscle.

At NMJ, the nerve terminal releases acetylcholine (ACh), which binds to nAChR on muscle cell membrane, leading to depolarization of muscle cell and muscle contraction. If antibodies bind to nAChR, they can block or reduce the number of available receptors for ACh, leading to decrease or even complete loss of the normal muscle response to nerve stimulation.

This can result in muscle weakness, fatigue, and even paralysis, depending on the severity of antibody binding and amount of functional nAChR remaining at the NMJ.

To know more about neuromuscular junction, refer

https://brainly.com/question/17076742

#SPJ1

Denitrification is the process by which nitrates and nitrites in the environment are reduced to nitrogen gas ([tex]N_2[/tex]) by removing and returning bioavailable nitrogen to the atmosphere.

Denitrification is a natural process that occurs in the environment and is primarily carried out by certain types of bacteria, such as Pseudomonas, Thiobacillus, and Clostridium. During this process, the bacteria break down nitrates and nitrites into nitrogen gas using a series of oxidation-reduction reactions. The nitrates and nitrites are first converted to nitric oxide ([tex]NO[/tex]) and nitrous oxide ([tex]N_2O[/tex]) gases which are then converted to nitrogen gas, which is released into the atmosphere. This process is important in the nitrogen cycle and is essential for the removal of nitrogen from the environment.

To learn more about nitrogen click here https://brainly.com/question/2396742

#SPJ4

A 2.7 mol sample of CO2 contains 44.0 grams of CO2. This is because 1 mol of CO2 has a molar mass of 44.01 g/mol.

Therefore, the calculation would be 2.7 mol x 44.01 g/mol = 44.0 grams of CO2.  To find the answer, we need to calculate the molar mass of CO2 first. This can be done by adding up the atomic weights of the atoms present in a molecule of CO2, which is one carbon atom and two oxygen atoms. The atomic weight of carbon is 12.01 g/mol and the atomic weight of oxygen is 15.99 g/mol. Therefore, the molar mass of CO2 is 12.01 + 15.99 + 15.99 = 44.01 g/mol.

To calculate the grams of CO2 in the sample, we need to multiply the molar mass of CO2 (44.01 g/mol) with the amount of moles of CO2 in the sample, which is 2.7 mol. Therefore, the calculation will be 2.7 mol x 44.01 g/mol = 44.0 grams of CO2.

For motre questions on molar mass

https://brainly.com/question/21334167

#SPJ11

The main psychoactive ingredient in Amanita muscaria is muscimol.

Amanita muscaria is a type of mushroom that is known for its hallucinogenic properties. Muscimol is a potent psychoactive compound that acts as an agonist for the neurotransmitter GABA, which is the primary inhibitory neurotransmitter in the central nervous system. When muscimol binds to GABA receptors, it enhances the inhibitory effects of GABA, leading to feelings of relaxation, euphoria, and altered perceptions of reality. In addition to muscimol, Amanita muscaria also contains other psychoactive compounds, including ibotenic acid, which is a precursor to muscimol and can also cause some hallucinogenic effects.

To know more about hallucinogenic effects, here

brainly.com/question/11912861

#SPJ4

The correct equation to calculate the mass, in grams, of sodium in 1.5 grams of sodium chloride is: C. 1.5 g NaCI X mol NaCI / 58.44 g NaCI X mol Na / mol NaCI X 22.99 g Na / mol Na.

To break it down, this equation is:

1.5 g (grams) of Sodium Chloride (NaCI) multiplied by the molar mass of Sodium Chloride (mol NaCI) divided by 58.44 g (grams) of Sodium Chloride multiplied by the moles of Sodium (mol Na) divided by the moles of Sodium Chloride (mol NaCI) multiplied by the molar mass of Sodium (22.99 g Na) divided by the moles of Sodium (mol Na).

In other words, the equation is:

Mass in gm (Na) = 1.5 g (NaCI) × (mol NaCI/58.44 g (NaCI)) × (mol Na/mol NaCI) × (22.99 g (Na)/mol Na).

For more information equation for mass calculation refer here

https://brainly.com/question/28225218?

#SPJ11

Lewis acids are Fe3+, AlBr3 and F. Lewis bases are NH3 and BF3.

The Lewis acid and Lewis base from among the reactants in each of the given chemical equations are given below:

Fe3+ (aq) + 6NH3(aq) = Fe(NH3)6 (aq): Fe3+ is the Lewis acid and NH3 is the Lewis base.

AlBr3 + NH3 = H3NAIBr: AlBr3 is the Lewis acid and NH3 is the Lewis base.

F-(aq) + BF3(aq) = BF4- (aq): F is the Lewis acid and BF3 is the Lewis base.

A Lewis acid is a compound or a chemical species that can accept a pair of electrons from another compound or chemical species. A Lewis acid-base reaction involves an acid that accepts an electron pair from a base. The electron-pair acceptor is referred to as a Lewis acid because it is accepting electrons from another atom or molecule.

A Lewis base is a compound or a chemical species that can donate a pair of electrons to another compound or chemical species. The Lewis acid-base reaction is one in which a base donates a pair of electrons to an acid. The electron-pair donor is referred to as a Lewis base because it is donating electrons to another atom or molecule.

Learn more about Lewis acid and base: https://brainly.com/question/28299444

#SPJ11

To solve this problem, we need to use the concept of solubility and saturation. Solubility is the maximum amount of solute that can dissolve in a given amount of solvent at a specific temperature.

The first step is to determine the solubility of potassium nitrate at 95°C and 35°C. According to the solubility chart, the solubility of potassium nitrate is 247 g/L at 95°C and 32 g/L at 35°C.

Next, we need to calculate how much potassium nitrate is dissolved in the 100 grams of water at 95°C. The solubility of potassium nitrate at 95°C is 247 g/L, so in 100 grams of water, we can dissolve:

(247 g/L) x (100 g / 1000 mL) = 24.7 g of potassium nitrate

Therefore, we have a saturated solution of potassium nitrate with 24.7 grams of potassium nitrate dissolved in 100 grams of water.

When the solution is cooled to 35°C, the solubility of potassium nitrate decreases to 32 g/L. Since we have more than 32 grams of potassium nitrate dissolved in the solution, the excess will precipitate out of the solution. The amount of potassium nitrate that will precipitate can be calculated by subtracting the solubility at 35°C from the initial concentration:

24.7 g - (32 g/L) x (100 g / 1000 mL) = 18.3 g

Therefore, 18.3 grams of potassium nitrate will precipitate out of the solution when it is cooled from 95°C to 35°C.

Learn more about solubility from

https://brainly.com/question/23946616

#SPJ1

Answer:

The mathematical function that represents breaking bonds requiring energy in a computational model is the addition symbol (+).

Breaking a bond requires the input of energy, which means that energy is being added to the system. Therefore, the energy required to break a bond can be represented as a positive value, which is added to the total energy of the system. For example, if the energy required to break a bond is 10 joules, and the initial energy of the system is 100 joules, the total energy after the bond is broken would be 110 joules.

On the other hand, when forming bonds, energy is typically released or given off by the system. This means that the energy required for bond formation can be represented by a negative value, which would be subtracted from the total energy of the system.

Explanation:

The chemical that the brain produce that makes people feel good when they exercise is dopamine and endorphins.

Endorphins are any of a group of peptide hormones found in the brain that act as neurotransmitters and have properties similar to morphine.

A neurotransmitter is any substance, such as acetylcholine or dopamine, responsible for sending nerve signals across a synapse between two neurons.

When you exercise, your body releases chemicals such as dopamine and endorphins in your brain that make you feel happy.

Learn more about endorphins at: https://brainly.com/question/28138527

#SPJ1

Using the bond dissociation energy approach, which entails deducting the total energy released when the bonds form in the products from the total energy released when the bonds are broken in the reactants, we may get the enthalpy change (H) for the given reaction.

The reaction's chemically balanced equation is as follows:

O2 (g) + 2H2(g) = 2H2O (g)

For the reaction, we may utilise the following bond dissociation energies (in kJ/mol):

436 kJ/mol H-H bond (reactant)

498 kJ/mol O=O bond (reactant)

463 kJ/mol H-O bond (product)

The energy needed to break the bonds in the reactants and the energy released when the bonds form in the products may both be calculated using these values::

learn more about reaction's chemically here:

https://brainly.com/question/29039149

#SPJ4

A) Equilibrium
The 3-year-old child is experiencing disequilibrium when she tries to erase her drawing with a pen and it does not erase. This is because her current understanding of a pencil does not fit with the new piece of information that it does not erase. Equilibrium occurs when a person is able to process new information and integrate it into their current understanding.
According to Piaget's cognitive development theory, the process by which a child's existing ideas are disrupted is called disequilibrium, which is option B.

What is cognitive development theory?

Cognitive development theory is a comprehensive theory that explains how children learn and acquire knowledge. This theory was created by psychologist Jean Piaget, who believed that cognitive growth is a gradual and ongoing process. According to Piaget, cognitive development refers to the gradual progression of thought processes, including problem-solving, attention, perception, and memory, that arise from biological development and environmental interaction. The process by which a child's existing ideas are disrupted is called disequilibrium. According to Piaget, when new information is discovered that does not fit into a person's existing schema, he or she may become disoriented or confused. This is referred to as disequilibrium. As a result, the person is compelled to adjust or adapt their schema to accommodate the new information. When this is accomplished, the person returns to a state of equilibrium. In the situation mentioned above, the child has a mental picture of what a pencil is in her head, but the pen does not meet her expectations. The child is thrown into a state of disequilibrium as a result of this confusion. The child may need to revise her schema in order to include pens. She will then restore her equilibrium once she has completed the revision process.

For more information follow the link: https://brainly.com/question/30638795

#SPJ11

In an isothermal expansion, option A Q> 0, AU = 0,W <0 marks the correct choice, where Q denotes the heat added, AU denotes the inertial energy change, and W is the work done.

In an isothermal expansion process of an ideal gas from state A to state B, the internal energy change (AU) is zero because the temperature remains constant. The work done (W) by the gas is negative because it loses energy in expanding against an external pressure. The heat added (Q) to the gas is positive because it absorbs energy from its surroundings to maintain its temperature constant.

While the system's temperature remains constant, isothermal expansion is a thermodynamic process that increases volume or decreases pressure. When isothermal expansion occurs in an ideal gas, T = 0, or no change in temperature, occurs. As the system performs it, the work done in an isothermal expansion is beneficial.

To know more about isothermal expansion, refer:

https://brainly.com/question/2921827

#SPJ4

Complete question is:

An ideal gas undergoes an isothermal expansion from state a to state b. In this process:

A. Q> 0, AU = 0, W <0.

B. Q> 0, AU = 0,W > 0.

C. Q=0, AU > 0,W >0.

D. Q=0, AU <0,W<0

E. Q = 0, AU = 0,W > 0

(a) The most likely mode of transport across the membrane for substance L is facilitated diffusion.

Transport is the movement of people, animals and goods from one location to another. It is a key factor in economic growth as it allows for the exchange of people, goods and services between different locations.

This can be determined from the data in Table 1 which shows that the rate of entry is directly related to the external concentration of substance L. As the external concentration increases, so does the rate of entry, indicating that the transport is not mediated by active transport and instead is dictated by the concentration gradient.
(b) The line graph below illustrates the data in Table 1, with the external concentration of substance L on the x-axis and the rate of entry of substance L into the cell as a percent of maximum on the y-axis.
(c) The external concentration of substance L that will result in one-half of the maximal entry rate is 50 mM. This can be determined from the graph, which shows that the rate of entry reaches half the maximum value at 50 mM.
(d) If substance L is attached to a large protein, it is likely to have a reduced ability to enter the cells. This is because the larger size of the protein will make it more difficult for it to pass through the membrane, thus reducing the rate of entry of the substance L into the cell.

To learn more about transport
https://brainly.com/question/30302054
#SPJ1

Answer:

D - 3.7 L.

Explanation:

Took the test.

Answer:

(A).Liquid water has a specific heat of 4.184J/g.k

(B)Volume = 39,420 LSo, kilograms= 44.7 kg

Explanation:

(a) The specific heat at constant volume of nitrogen (N2) gas is 20.8 J/K.mol. Compare it with the specific heat of liquid water.Liquid water has a specific heat of 4.184 J/g.K

(b) For the same amount of heat, we would be able to warm 44.7 kg of 20.0 °C air to 30.0 °C. Air has a molar mass of 28.97 g/mol. We can use the ideal gas law to determine the volume of 44.7 kg of air at 20.0 °C and 1.00 atm pressure.

We know that 1 mol of a gas at STP (standard temperature and pressure) occupies 22.4 L. Since air is 100% N2, its molar mass is 28.0 g/mol. The ideal gas law is given by PV = nRT where P = pressure, V = volume, n = number of moles, R = the universal gas constant, and T = temperature.

Substituting values, we have:

PV = nRTV = nRT/PAt

20.0 °C and 1.00 atm, T = 293 K and P = 1.00 atm.

Therefore, we have:

n = mass/molar mass = 44.7 kg / (28.97 g/mol) = 1543.8 mol

R = 0.082 L.atm/K.mol

Substituting these values into the equation, we have:

V = (1543.8 mol)(0.082 L.atm/K.mol)(293 K) / (1.00 atm)

V = 39,420 LSo, 44.7 kg of 20.0 °C air occupies a volume of 39,420 L at 20.0 °C and 1.00 atm pressure.

To know more about ideal gas law refer here: https://brainly.com/question/30458409#
#SPJ11

Lithium Chloride: Lithium Chloride is an ionic compound, which means that the atoms are held together by electrostatic forces.

The electrons in the outermost shell of the lithium atom are transferred to the chlorine atom, resulting in the formation of an ionic bond between the two atoms. The electrons that are transferred become part of the chlorine ion's electron cloud, giving it a negative charge.

The lithium atom now has fewer electrons than protons, giving it a positive charge and forming a Li+ ion. The chlorine atom now has more electrons than protons, giving it a negative charge and forming a Cl- ion.

Hydrogen Chloride: Hydrogen Chloride is a covalent compound, which means that the atoms are held together by sharing electrons. In the case of hydrogen chloride, the hydrogen atom shares its electron with the chlorine atom, resulting in the formation of a covalent bond between the two atoms. The shared electron is part of both the hydrogen and chlorine atom's electron clouds, forming a neutral H-Cl molecule.

Learn more about  lithium chloride  here:

https://brainly.com/question/29197367

#SPJ1

Carbon monoxide is an odorless, colorless gas that is a byproduct of combustion, found in car exhaust, fumes from natural gas heaters, outdoor grills and sometimes, faulty home heating systems. Levels near 100 parts per million (ppm) are quite toxic and this gas can be lethal.

The toxic effects to humans are largely two fold: 1) it can bind to hemoglobin in the red blood cells, leading to hypoxia, and 2) it can affect oxidative phosphorylation and electron transport in the mitochondria.

Carbon monoxide is but one of many toxins affecting oxidative phosphorylation and electron transport in the mitochondria, prominent others include cyanide, hydrogen sulfide, and carbon dioxide.

Uncoupling with regard to oxidative phosphorylation refers to mechanisms to dissipate the proton gradient, without producing ATP.

Uncoupling produces heat, and this mechanism is found in animals to generate heat during hibernation and long periods without food intake. Molecules blocking ATP synthase function, such as oligomycin, produce a decrease in the production of ATP.

To know more about carbon monoxide, refer here:

https://brainly.com/question/8688797#

#SPJ11

The N-H bond is created when an sp3 orbital in N overlaps with a s orbital in H. The right response is number two. This is due to the four electron domains on the nitrogen atom in NH3, which combine to generate four sp3 orbitals.

The N-H bond is created when an sp3 orbital in N crosses a s orbital in H.

The nitrogen atom in NH3 has a tetrahedral geometry and four hybridised sp3 orbitals that hold its four valence electrons. The valence electron of a hydrogen atom is located in a s orbital. An s orbital from a hydrogen atom and a nitrogen atom's sp3 hybrid orbital overlap to create the N-H bond. The covalent link formed by the sharing of electrons between nitrogen and hydrogen is what causes this overlap. The orbital overlap that results in the creation of the N-H bond in NH3 is accurately described by Option 2.

learn more about nitrogen atom here:

https://brainly.com/question/2396742

#SPJ4

The empirical formula of chloroethene is C₂H₃Cl, which can be simplified to C₂H₃Cl.

The probably the easiest whole number ratio of atoms in a compound is an empirical formula. It gives the relative number of atoms of each element in the compound, but not the actual number of atoms or the arrangement of the atoms. The empirical formula is determined based on the experimental data of the percentage composition by mass or the molar ratios of the elements in the compound.

To find the empirical formula of chloroethene, we need to determine the simplest whole number ratio of the atoms present in the compound.

Let's assume we have a 100 g sample of chloroethene. Then, we can calculate the mass of each element present in the sample:

Mass of carbon (C) = 38.4 g

Mass of hydrogen (H) = 4.8 g

Mass of chlorine (Cl) = 56.8 g

Next, we need to convert these masses to moles by dividing by their respective atomic masses:

Moles of carbon (C) = 38.4 g / 12.01 g/mol = 3.196 mol

Moles of hydrogen (H) = 4.8 g / 1.01 g/mol = 4.752 mol

Moles of chlorine (Cl) = 56.8 g / 35.45 g/mol = 1.601 mol

We can then divide each of these mole values by the smallest mole value to get the simplest whole number ratio:

Carbon: 3.196 mol / 1.601 mol = 1.998 ≈ 2

Hydrogen: 4.752 mol / 1.601 mol = 2.969 ≈ 3

Chlorine: 1.601 mol / 1.601 mol = 1

To know more about empirical formula, visit:

https://brainly.com/question/14044066

#SPJ1

Answer:

B - 4.5 L.

Explanation:

Took the test.

True. Ethyl chloride is produced by the gas-phase reaction of hydrochloric acid (HCl) with ethylene over a copper chloride catalyst supported on silica.

Ethyl chloride is a colorless gas that is used in a variety of chemical processes. Ethyl chloride is most commonly used as an inhalational anesthetic during surgery.

It's also utilized in the production of plastics and chemicals, as well as a solvent in some industrial processes. When exposed to sunlight or heat, ethyl chloride is combustible, and it is harmful to human health if breathed in.

Thus, the statement is true, Ethyl chloride is produced by the gas-phase reaction of hydrochloric acid (HCl) with ethylene over a copper chloride catalyst supported on silica.

Learn more about ethyl chloride here:

https://brainly.com/question/14104484

#SPJ11

The following statement is the correct comparison of the midpoint and equivalence point rates of change of pH as a function of volume and its consequence for the careful determination of pH:

The rate of change of pH vs. volume is greater at the equivalence point than it is at the midpoint leading to a greater uncertainty in the measurement of pH at the equivalence point than at the midpoint.

Midpoint- It is the point in the titration where half the analyte has been neutralized by the titrant. This point lies at the middle of start point and equivalence point.

Equivalence point- An equivalence point is the point at which the two reactants are present in stoichiometric amounts in a chemical reaction. During an acid-base titration, the equivalence point is reached when the number of moles of the acid equals the number of moles of the base. When an acid is titrated with a base, the solution's pH begins low and rises rapidly, indicating the formation of the conjugate base. The pH rises quickly at first and then slows as the solution approaches the equivalence point. After the equivalence point, adding more base has a much smaller effect on the pH.

Therefore, the correct answer is option B.

To learn more about "equivalence point", visit: https://brainly.com/question/2496608

#SPJ11

The nitrification basin's counterpart, the aeration basin, is located in the wastewater treatment facility.

Anything that will either float or easily settle out by gravity is removed during primary treatment. It involves the mechanical procedures of comminution, grit removal, screening, and sedimentation. Screens are made of long, thin metal bars with tight spacing.

In secondary wastewater treatment methods, microorganisms are utilized to biologically remove contaminants from wastewater. Secondary biological processes can be either aerobic or anaerobic, and they all make use of various bacterial communities.

To know more about nitrification visit:-

https://brainly.com/question/17425312

#SPJ1

TRUE. The codons in mRNA, which are collections of three nucleotides, stand for certain amino acids that are combined to produce proteins during translation.

In order to create a protein, the information contained in mRNA must be deciphered during the process of translation. The genetic code that regulates the order in which amino acids are put together to make proteins is found in the sequence of nucleotides in mRNA known as codons. A codon is made up of three nucleotides, each of which stands for an amino acid or a stop signal that denotes the completion of protein synthesis. The ribosome scans the mRNA's codon sequence during translation and matches each codon with the appropriate amino acid. A functional protein is produced when a chain of amino acids that have been joined together by peptide bonds folds into a three-dimensional structure. Hence, the codons in mRNA play a critical role in determining the amino acid sequence of a protein.

learn more about codons here:

https://brainly.com/question/9382652

#SPJ4