a test statistic value of 2.14 puts it in the rejection region. if the test statistic is actually 2.19 then we know the p-value is less than the significance level for the test. true or false

The team can bring approximately 14 players to the tournament.

Let's denote the number of players as pp. We know that the total amount raised by the team is $2033 and the cost of renting the bus is $993.50. Additionally, the budgeted amount per player for meals is $74.25. Based on this information, we can set up the following equation:

2033 - 993.50 - 74.25pp = 0

Simplifying the equation, we have:

1039.50 - 74.25pp = 0

To solve for pp, we isolate the variable by subtracting 1039.50 from both sides:

-74.25pp = -1039.50

Finally, dividing both sides of the equation by -74.25, we get:

pp = (-1039.50) / (-74.25)

pp ≈ 14

Therefore, the team can bring approximately 14 players to the tournament.

For more such answers on budget

https://brainly.com/question/29028797

#SPJ8

The value that minimizes the expression is x = 90. This means that the most accurate Measurement of the patient's pulse rate is 90 bpm.

In this scenario, the doctor wants to determine the most accurate measurement of the patient's pulse. To do this, the doctor wants to find the value that minimizes the expression (x − 70)2 + (x − 80)2 + (x − 120)2. This expression represents the sum of the squared differences between each measured pulse rate and the unknown true pulse rate, represented by x.
To find the value that minimizes this expression, we need to find the value of x that makes the expression as small as possible. One way to do this is to take the derivative of the expression with respect to x and set it equal to zero. Doing this, we get:
2(x-70) + 2(x-80) + 2(x-120) = 0
Simplifying this equation, we get:
6x - 540 = 0
Solving for x, we get:
x = 90
Therefore, the value that minimizes the expression is x = 90. This means that the most accurate measurement of the patient's pulse rate is 90 bpm.

To know more about Measurement .

https://brainly.com/question/30925181

#SPJ11

If f is continuous and ∫(14f(x)dx) from 0 to 6 = 6, then ∫(7f(2x)dx) from 0 to 3 = 3.

To explain this, let's follow these steps:

1. We are given that ∫(14f(x)dx) from 0 to 6 = 6.

2. Divide both sides of the equation by 2 to get ∫(7f(x)dx) from 0 to 6 = 3.

3. Now, apply the substitution method: let u = 2x, so du/dx = 2 and dx = du/2.

4. Change the limits of integration: when x = 0, u = 2(0) = 0; when x = 3, u = 2(3) = 6.

5. Substitute u into the integral and adjust the limits: ∫(7f(u)du/2) from 0 to 6.

6. The constant 7/2 can be factored out of the integral: (7/2)∫(f(u)du) from 0 to 6.

7. Since we know that ∫(7f(x)dx) from 0 to 6 = 3, we can conclude that (7/2)∫(f(u)du) from 0 to 6 = 3.
8. So, ∫(7f(2x)dx) from 0 to 3 = 3.

To know more about integral click on below link:

https://brainly.com/question/18125359#

#SPJ11

True. C differs from C++ in that it has a static semantics rule that disallows the implicit execution of more than one segment.

This means that in C, each program must have a single function called main() that acts as the starting point of the program. The main() function may call other functions, but these functions must be explicitly invoked and cannot be executed implicitly. In contrast, C++ allows for multiple definitions of main() and also allows for the implicit execution of more than one segment. This means that C++ programs can have multiple functions that can be executed without being explicitly invoked, which gives C++ programs more flexibility and functionality than C programs.

Learn more about static semantics here

https://brainly.com/question/31602656

#SPJ11

The average EMF induced in the coil is 2.714336 × 10⁻⁴

To calculate the average EMF induced in the coil, we need to determine the change in magnetic flux through the coil and divide it by the time interval over which the change occurs.

The magnetic flux (Φ) through a coil is given by the formula:

Φ = B * A * cos(θ),

where B is the magnetic field strength, A is the area of the coil, and θ is the angle between the magnetic field and the normal to the coil.

When the coil is perpendicular to the field at t = 0, the angle θ is 90 degrees, and the magnetic flux is:

Φ1 = B * A * cos(90) = 0,

since the cosine of 90 degrees is zero.

At t = 0.015s, the coil becomes parallel to the field, so the angle θ becomes 0 degrees. The magnetic flux at this moment is:

Φ2 = B * A * cos(0) = B * A.

The change in magnetic flux (ΔΦ) during this transition is given by:

ΔΦ = Φ2 - Φ1 = B * A.

To find the average emf (ε) induced in the coil, we divide the change in magnetic flux by the time interval (Δt) over which the change occurs:

ε = ΔΦ / Δt.

Given that the radius of the coil is 6.0 cm, the area (A) of the coil can be calculated using the formula for the area of a circle:

A = π * r²

where r is the radius of the coil. Substituting the values, we get:

A = π * (0.06 m)²

Substituting the values of B and A, and noting that the time interval Δt is 0.015s, we can calculate the average EMF induced in the coil:

ε = (B * A) / Δt.

By substituting the known values, the calculation becomes:

ε = (3.6x10⁻⁴ T) * (π * (0.06 m)²) / 0.015 s. =  2.714336 × 10⁻⁴

To know more about average here

https://brainly.com/question/16956746

#SPJ4

P(C|D) is not equal to P(C), we can conclude that events C and D are dependent in this sample. In other words, knowing someone's food preference affects the likelihood of them being left-handed, and vice versa.

To calculate P(C) (the probability of being left-handed) we can use the total number of left-handed students divided by the total number of students in the class:

P(C) = 32/92 ≈ 0.348

To calculate P(C|D) (the probability of being left-handed given a preference for sweet foods), we need to use the conditional probability formula:

P(C|D) = P(C and D) / P(D)We don't have the joint probability P(C and D), but we can calculate it from the table by looking at the number of left-handed students who prefer sweet foods (20) and dividing by the total number of students (92):

P(C and D) = 20/92 ≈ 0.217

We can also calculate P(D) (the probability of preferring sweet foods) by looking at the total number of students who prefer sweet foods (55) and dividing by the total number of students (92):

P(D) = 55/92 ≈ 0.598

Now we can substitute these values into the formula:

P(C|D) = 0.217 / 0.598 ≈ 0.363

Since P(C|D) is not equal to P(C), we can conclude that events C and D are dependent in this sample. In other words, knowing someone's food preference affects the likelihood of them being left-handed, and vice versa on Handedness and Food Preferences.

For such more questions on Handedness and Food Preferences

https://brainly.com/question/29238102

#SPJ11

When we simplify the expression Logₐ1 + 3Logₐx - 2Logₐ4x, the result obtained is Logₐ (x/ 16)

The logarithm expression Logₐ1 + 3Logₐx - 2Logₐ4x can be simplified as illustrated below:

Expression: Logₐ1 + 3Logₐx - 2Logₐ4x

Recall

mLog n = Lognᵐ

Thus, we have

Logₐ1 + 3Logₐx - 2Logₐ4x = Logₐ1 + Logₐx³ - Logₐ(4x)²

Logₐ1 + 3Logₐx - 2Logₐ4x = Logₐ1 + Logₐx³ - Logₐ16x²

Recall,

Log M + Log N = LogMN

Log M - Log N = Log (M/N)

Thus, we have

Logₐ1 + Logₐx³ - Logₐ16x² = Logₐ[(1 × x³) / 16x²]

Logₐ1 + Logₐx³ - Logₐ16x² = Logₐ(x³/ 16x²)

Logₐ1 + Logₐx³ - Logₐ16x² = Logₐ (x/ 16)

Thus,

Logₐ1 + 3Logₐx - 2Logₐ4x = Logₐ (x/ 16)

Therefore, we can conclude that the simplified expression of Logₐ1 + 3Logₐx - 2Logₐ4x, is Logₐ (x/ 16)

Learn more about simplification of logarithm:

https://brainly.com/question/20473168

#SPJ1

The length of Angela's pillow, which is filled with 0.35 m³ of fluffy material, can be determined by calculating the cube root of the volume.

The volume of the pillow is given as 0.35 m³. To find the length of the pillow, we need to calculate the cube root of this volume. The cube root of a number represents the value that, when multiplied by itself three times, equals the original number.

Using a calculator, we can find the cube root of 0.35. The result is approximately 0.692 m. Therefore, the length of Angela's pillow is approximately 0.692 meters.

The cube root is used here because the volume of the pillow is given in cubic meters. The cube root operation "undoes" the effect of raising a number to the power of 3, which is equivalent to multiplying it by itself three times. By taking the cube root of the volume, we can determine the length of the pillow.

Learn more about length here:

https://brainly.com/question/2497593

#SPJ11

To consider two nonnegative numbers x and y where x y=11, the minimum value of 7x² + 13y is 146.

To find the minimum value of 7x² + 13y, we need to use the given constraint that xy = 11. We can solve for one variable in terms of the other by rearranging the equation to y = 11/x. Substituting this into the expression, we get:
7x² + 13(11/x)
Simplifying this expression, we can combine the terms by finding a common denominator:
(7x³ + 143)/x
Now, we can take the derivative of this expression with respect to x and set it equal to 0 to find the critical points:
21x² - 143 = 0
Solving for x, we get x = √(143/21). Plugging this back into the expression, we get:
Minimum value = 7(√(143/21))² + 13(11/(√(143/21))) = 146
Therefore, the minimum value of 7x² + 13y is 146.

Learn more about denominator here:

https://brainly.com/question/13014964

#SPJ11

The value of cos2u is [tex]\frac{-527}{625}[/tex].

Let's start by finding sin v, which we can do using the Pythagorean identity:

[tex]sin^{2} + cos^{2} = 1[/tex]

[tex]sin^{2}v+(\frac{-7}{25} )^{2} = 1[/tex]

[tex]sin^{2} = 1-(\frac{-7}{25} )^{2}[/tex]

[tex]sin^{2}= 1-\frac{49}{625}[/tex]

[tex]sin^{2} = \frac{576}{625}[/tex]

Taking the square root of both sides, we get: sin v = ±[tex]\frac{24}{25}[/tex]

Since cos v is negative and sin v is positive, we know that v is in the second quadrant, where sine is positive and cosine is negative. Therefore, we can conclude that: [tex]sin v = \frac{24}{25}[/tex]

Now, let's use the double angle formula for cosine to find cos 2u: cos 2u = cos²u - sin²u

We can substitute the values we know:

[tex]cos 2u = (\frac{7}{25}) ^{2}- (\frac{24}{25} )^{2}[/tex]

[tex]cos 2u = \frac{49}{625} - \frac{576}{625}[/tex]

[tex]cos 2u = \frac{-527}{625}[/tex]

Therefore, the exact value of cos 2u is [tex]\frac{-527}{625}[/tex].

To know more about  "Pythagorean identity" refer here:

https://brainly.com/question/15586213#

#SPJ11

The situation which could be represented by the expression c−5 is "five less than some number c."

Explanation:In order to write the expression c - 5 in words, you have to think about what the subtraction operation represents.

A subtraction problem is the same as asking how much more or less one quantity is than another.

So, when you subtract 5 from a number c, you get a result that is 5 less than c.

This can be written in words as "five less than some number c."

Therefore, the situation which could be represented by the expression c−5 is "five less than some number c."

To know more about expression visit:

https://brainly.com/question/28170201

#SPJ11

Answer:

x = 1

Step-by-step explanation:

Both equations can be set equal to each other since they are both equal to y:

[tex]x-10=-4x-5\\5x-10=-5\\5x=5\\x=1[/tex]

equate both equations !

x - 10 = -4x - 5

5x - 10 = -5

5x = 5

x = 1

therefore x = 1

Probability is a measure of the likelihood of an event occurring, expressed as a number between 0 and 1. It is calculated based on the number of favorable outcomes divided by the total number of possible outcomes.

To solve this problem, we will use the formula for probability of independent events:

P(A and B and C) = P(A) x P(B|A) x P(C|A and B)

where P(A) is the probability of the first event, P(B|A) is the probability of the second event given that the first event has occurred, and P(C|A and B) is the probability of the third event given that the first two events have occurred.

a.) Probability of drawing three red balls in succession:

P(RRR) = (24/81) x (23/80) x (22/79) = 0.027 or 2.7%

b.) Probability of drawing three green balls in succession:

P(GGG) = (27/81) x (26/80) x (25/79) = 0.061 or 6.1%

c.) Probability of drawing three blue balls in succession:

P(BBB) = (30/81) x (29/80) x (28/79) = 0.080 or 8.0%

Therefore, the probability of drawing all three balls of the same color without replacement from the box are:
a.) 2.7%
b.) 6.1%
c.) 8.0%

To know more about Probability visit:

https://brainly.com/question/30034780

#SPJ11

Comparing the least squares and maximum likelihood estimators, we find that they are indeed the same.

In the multiple regression model, Y_i = β_1 X_i1 + β_2 X_i2 + ε_i, the least squares criterion aims to minimize the sum of squared residuals (SSR), which represents the difference between the actual and predicted values of the dependent variable Y. Mathematically, it is expressed as:

SSR = Σ(ε_i)² = Σ(Y_i - (β_1 X_i1 + β_2 X_i2))²

To derive the least squares estimators for β_1 and β_2, we differentiate SSR with respect to β_1 and β_2 and set the resulting equations to zero. This yields the normal equations, which we can solve simultaneously to obtain the estimates for β_1 and β_2.

Assuming the ε_i are independent normal random variables with E{ε_i} = 0 and σ²{ε_i} = σ², the likelihood function can be written as:

L(β_1, β_2, σ²) = Π [ (1/(√(2πσ²))) * exp( -(ε_i)^2 / (2σ²) ) ]

Taking the logarithm of L, we obtain the log-likelihood function, which we differentiate with respect to β_1, β_2, and σ². By setting these partial derivatives to zero and solving the resulting equations, we obtain the maximum likelihood estimators (MLE) for β_1 and β_2.

Comparing the least squares and maximum likelihood estimators, we find that they are indeed the same. This is because both approaches minimize the sum of squared errors in the linear regression model, and the normality assumption of the errors implies that the MLE and least squares estimators coincide.

To know more about regression model, refer to the link below:

https://brainly.com/question/29217160#

#SPJ11

The series ∑=0infinity(3)2(2)! converges exactly to -9/2.

We can write the series using the Maclaurin series for cos(x) as follows:

∑=0infinity^n(3^(2n))/(2n)! = cos(3i)

The Maclaurin series for cos(x) is:

cos(x) = 1 - x^2/2! + x^4/4! - x^6/6! + ...

Substituting x = 3i, we get:

cos(3i) = 1 - (3i)^2/2! + (3i)^4/4! - (3i)^6/6! + ...

Simplifying the powers of i, we get:

cos(3i) = 1 - 9/2! - i(3)^3/3! + i(3)^5/5! - ...

The imaginary part of cos(3i) is:

Im(cos(3i)) = -3^3/3! + 3^5/5! - ...

The series for the imaginary part is an alternating series with decreasing absolute values, so it converges by the Alternating Series Test. Therefore, the exact value of the series is the real part of cos(3i), which is:

Re(cos(3i)) = cosh(3) = (e^3 + e^-3)/2

Using a calculator or a computer program, we can evaluate cosh(3) and simplify to get:

cosh(3) = (e^3 + e^-3)/2 = (1/2)(e^6 + 1)/(e^3)

Therefore, the series ∑=0infinity(3)2(2)! converges exactly to -9/2.

To know more about series, visit;

https://brainly.com/question/6561461

#SPJ11

The coefficient of x²y¹⁵ in the expansion of (5x² + 2y³)⁶ is 192.

-To find the coefficient of x²y¹⁵ in the expansion of (5x² + 2y³)⁶, you can use the binomial theorem. The binomial theorem states that [tex](a + b)^n[/tex] = Σ [tex][C(n, k) a^{n-k} b^k][/tex], where k goes from 0 to n, and C(n, k) represents the number of combinations of n things taken k at a time.

-Here, a = 5x², b = 2y³, and n = 6. We want to find the term with x²y¹⁵, which means we need a^(n-k) to be x² and [tex]b^k[/tex] to be y¹⁵.

-First, let's find the appropriate value of k:
[tex](5x^{2}) ^({6-k}) =x^{2} \\ 6-k = 1 \\k=5[/tex]

-Now, let's find the term with x²y¹⁵:
[tex]C(6,5) (5x^{2} )^{6-5} (2y^{3})^{5}[/tex]
= C(6, 5) (5x²)¹ (2y³)⁵
= [tex]\frac{6!}{5! 1!}  (5x²)  (32y¹⁵)[/tex]
= (6)  (5x²)  (32y¹⁵)
= 192x²y¹⁵

So, the coefficient of x²y¹⁵ in the expansion of (5x² + 2y³)⁶ is 192.

To know more about "Binomial theorem" refer here:

https://brainly.com/question/30100273#

#SPJ11

Tthe ratio of bags of chips to cost in dollars is constant.

Given the table shows the relationship between bags of chips and their cost in dollars. The ratio of bags of chips to cost in dollars is constant.A bag of chips costs a specific amount of money, and a fixed number of bags can be bought for a particular cost.

The cost of bags of chips can be found by multiplying the number of bags by the cost per bag. As the number of bags rises, the total cost of bags increases at a proportional rate.

The ratio of the cost of bags to the number of bags is constant, and this is a linear relationship. In a linear relationship, the dependent variable changes at a constant rate for each unit change in the independent variable, which is bags of chips in this case. When the cost of bags of chips rises as the number of bags rises, this indicates a positive relationship between the two.

The relationship between the number of bags of chips and the cost of bags of chips can be expressed using a linear equation, which can be written in the form of y = mx + b, where y is the cost of bags of chips, m is the constant ratio of cost to bags, x is the number of bags of chips, and b is the y-intercept (the cost when no bags of chips are purchased).

The relationship between the number of bags of chips and their cost in dollars is a proportional relationship, as the ratio of bags of chips to cost in dollars is constant.

The cost can be calculated by multiplying the number of bags by the cost per bag. As the number of bags increases, the total cost also increases proportionally, indicating a linear relationship.

Know more about ratio here,

https://brainly.com/question/13419413

#SPJ11

Answer:

C.

Step-by-step explanation:

This question is generally easy to do, all you need to do is times by 8 until you get to 56. Since 8x7 is 56 the answer is C. You're welcome.

In a Receiver Operating Characteristic (ROC) curve, the x-axis typically represents the False Positive Rate (FPR), and the y-axis represents the True Positive Rate (TPR).

The False Positive Rate (FPR) is the proportion of negative instances that are incorrectly classified as positive. It is calculated as:

FPR = FP / (FP + TN)

where FP represents the number of false positives (negative instances incorrectly classified as positive) and TN represents the number of true negatives (correctly classified negative instances).

The True Positive Rate (TPR), also known as Sensitivity or Recall, is the proportion of positive instances that are correctly classified as positive. It is calculated as

TPR = TP / (TP + FN)

where TP represents the number of true positives (correctly classified positive instances) and FN represents the number of false negatives (positive instances incorrectly classified as negative).

Therefore, the labels on the x-axis and y-axis in an ROC curve indicate the False Positive Rate (FPR) and True Positive Rate (TPR), respectively.

Learn more about True Positive Rate Visit : brainly.com/question/29744782

#SPJ11

The sequence an = n^2e^(-n) is convergent. It converges to 0.

To determine if a sequence is convergent or divergent, we can analyze the behavior of its terms as n approaches infinity. In this case, as n gets larger, the exponential term e^(-n) approaches 0 since the exponent becomes very negative. The term n^2 also increases as n grows, but it is dominated by the exponential term. Therefore, the product of n^2 and e^(-n) approaches 0 as n approaches infinity.

To provide a formal proof, we can use the limit definition of convergence. Let's consider the limit of the sequence as n approaches infinity:

lim(n→∞) n^2e^(-n) = lim(n→∞) n^2 * lim(n→∞) e^(-n)

As n approaches infinity, the first term lim(n→∞) n^2 goes to infinity. However, the second term lim(n→∞) e^(-n) goes to 0. Therefore, the product of these two terms tends to 0 as n approaches infinity. This shows that the sequence an = n^2e^(-n) is convergent, and it converges to 0.

In summary, the sequence an = n^2e^(-n) is convergent, and it converges to 0 as n approaches infinity.

Learn more about convergence here:

https://brainly.com/question/28202684

#SPJ11

Answer: We can use the half-angle formulas to find sin(x/2), cos(x/2), and tan(x/2) from sin(x).

First, we know that sin(x/2) = ±√((1 - cos(x))/2) and cos(x/2) = ±√((1 + cos(x))/2), where the sign depends on the quadrant in which x/2 lies. We can determine the quadrant by drawing a reference triangle with opposite side 3 and hypotenuse 5, which gives us adjacent side 4 by the Pythagorean theorem. Since sin(x) = 3/5 is positive and 0° < x < 90°, we know that x/2 is in the first quadrant.

Using this information, we have:

cos(x) = 4/5 (adjacent/hypotenuse)

sin(x/2) = √((1 - cos(x))/2) = √((1 - 4/5)/2) = √(1/10) = √10/10 = √10/10

cos(x/2) = √((1 + cos(x))/2) = √((1 + 4/5)/2) = √(9/10) = 3√10/10

tan(x/2) = sin(x/2)/cos(x/2) = (√10/10)/(3√10/10) = 1/3

Therefore, sin(x/2) = √10/10, cos(x/2) = 3√10/10, and tan(x/2) = 1/3.

In given trigonometric function , the value will be  sin(x/2) = √10/10, cos(x/2) = 3/√10, and tan(x/2) = 1/3.

We can use the half angle identities to find sin(x/2), cos(x/2), and tan(x/2) in terms of sin(x).

First, we know that:

sin(x/2) = ±√[(1 - cos(x))/2]

cos(x/2) = ±√[(1 + cos(x))/2]

tan(x/2) = sin(x)/(1 + cos(x))

Since 0° < x < 90° and sin(x) > 0, we know that sin(x/2) and cos(x/2) are both positive. Also, since cos(x) = √(1 - sin^2(x)), we have:

cos(x) = √(1 - (3/5)^2) = 4/5

Using this, we can find:

sin(x/2) = √[(1 - cos(x))/2] = √[(1 - 4/5)/2] = √(1/10) = √10/10 = √10/10

cos(x/2) = √[(1 + cos(x))/2] = √[(1 + 4/5)/2] = √(9/10) = 3/√10

tan(x/2) = sin(x)/(1 + cos(x)) = (3/5)/(1 + 4/5) = 3/9 = 1/3

Therefore, sin(x/2) = √10/10, cos(x/2) = 3/√10, and tan(x/2) = 1/3.

To know more about trigonometry refer here:

https://brainly.com/question/22986150?#

#SPJ11

The surface area of revolution of the curve y = 4x + 3 about the x-axis over the interval [0, 6] can be computed using the formula for surface area of revolution.

The formula states that the surface area is equal to the integral of 2πy times the square root of [tex](1 + (dy/dx)^2) dx[/tex], where y represents the equation of the curve. In this case, y = 4x + 3, so the integral becomes the integral of 2π(4x + 3) times the square root of [tex](1 + (4)^2) dx[/tex]. Simplifying further, we have the integral of 2π(4x + 3) times the square root of 17 dx. Integrating this expression over the interval [0, 6], we can evaluate the definite integral to find the surface area of revolution for the given curve.

To calculate the exact value, we need to evaluate the definite integral of 2π(4x + 3)√17 with respect to x over the interval [0, 6]. After integrating and substituting the limits of integration, the surface area of revolution can be determined.

Learn more about square root here: https://brainly.com/question/29286039

#SPJ11

The equation of the tangent to the curve at the point corresponding to θ = 0 is y = 1/2x - 1/2.

To find the equation of the tangent to the curve, we need to determine the slope of the tangent at the given point. We differentiate the equations of x and y with respect to θ:

dx/dθ = -sin(θ) + 2cos(2θ)

dy/dθ = cos(θ) - 2sin(2θ)

Substituting θ = 0 into these derivatives, we get:

dx/dθ = -sin(0) + 2cos(0) = 0 + 2 = 2

dy/dθ = cos(0) - 2sin(0) = 1 - 0 = 1

The slope of the tangent is given by dy/dx. Therefore, the slope at θ = 0 is:

dy/dx = (dy/dθ)/(dx/dθ) = 1/2

Using the point-slope form of a line, where the slope is 1/2 and the point is (x, y) = (cos(0) + sin(20), sin(0) + cos(20)) = (1, 0), we can write the equation of the tangent as:

y - 0 = (1/2)(x - 1)

Simplifying the equation, we get:

y = 1/2x - 1/2

Therefore, the equation of the tangent to the curve at the point corresponding to θ = 0 is y = 1/2x - 1/2.

For more questions like Equation click the link below:

https://brainly.com/question/29657983

#SPJ11

We will use law of sines to solve this. The correct answer is option (b): A = 26.8°, a = 52.8, c = 26.

In a triangle, the sum of all angles is always 180°.

Therefore, we can find angle A by subtracting angles B and C from 180°:

A = 180° - B - C

A = 180° - 49.2° - 102°

A ≈ 28.8°

Now, we can use the Law of Sines to find the lengths of sides a and c. The Law of Sines states that the ratio of the length of a side to the sine of its opposite angle is the same for all sides of a triangle:

a/sin(A) = c/sin(C)

Plugging in the known values, we have:

52.8/sin(28.8°) = c/sin(102°)

Solving for c, we get:

c = (52.8 * sin(102°)) / sin(28.8°)

c ≈ 26

To find side a, we can use the Law of Sines again:

a/sin(A) = b/sin(B)

Plugging in the known values, we have:

a/sin(28.8°) = 40.9/sin(49.2°)

Solving for a, we get:

a = (40.9 * sin(28.8°)) / sin(49.2°)

a ≈ 52.8

Therefore, the correct solution is A = 26.8°, a = 52.8, c = 26, as stated in option (b).

Learn more about law of sines:

https://brainly.com/question/30248261

#SPJ11

Answer:

explain yourself

Step-by-step explanation:

explain yourself, rather than writing the answer as x=88 explain why it is, for example we can say that

"since a four sided shapes total interior angles are 360⁰ we can add up the angles that we know, here 156, 69 and 47, giving us 272, subtracting that from 360 gives us 88 which is the answer for x"

Answer:

answer below

Step-by-step explanation:

angles in quadrilateral add up to 360°

There is no value of (m,n) such that f(m,n) = k, which implies that k is not in the range of f. We have shown that f is not surjective.

To prove that the function f(m,n) = 2^m * 3^n is injective, we need to show that if f(m1,n1) = f(m2,n2), then (m1,n1) = (m2,n2).

Suppose that f(m1,n1) = f(m2,n2). Then we have:

2^m1 * 3^n1 = 2^m2 * 3^n2

Dividing both sides by 2^m1 * 3^n1 (which is nonzero), we get:

(2^m2 / 2^m1) * (3^n2 / 3^n1) = 1

Simplifying, we get:

2^(m2-m1) * 3^(n2-n1) = 1

Since 2 and 3 are both prime numbers, this implies that m2-m1 = 0 and n2-n1 = 0, which in turn implies that m1 = m2 and n1 = n2. Therefore, we have shown that f is injective.

To prove that f is not surjective, we need to find a natural number k that is not in the range of f. Let's suppose that k is in the range of f, so there exist m and n such that:

k = 2^m * 3^n

Without loss of generality, we can assume that m <= n (otherwise, we can just swap m and n). Then, we have:

2^m * 3^n >= 2^m * 3^m = (2/3)^m * 3^(2m)

We know that (2/3)^m approaches 0 as m approaches infinity, so for any large enough value of m, we have:

2^m * 3^n > k

Know more about range here:

https://brainly.com/question/28135761

#SPJ11

The passing grade is 60%, Shalyn's overall Grade of 81.33 is higher than the passing grade, so she will move on to Geometry.

The overall grade for Roland and Shalyn, the weights assigned to each marking period and the final exam. Additionally, the passing grade required to move on to the next class. the grades but not the weightings or passing grades equal weighting for all components and a passing grade of 60% for both classes.

1. Roland's overall grade:

Since the weightings are not specified, we'll assume equal weighting for each component. We'll calculate the average of the three grades.

(77 + 64 + 53) / 3 = 194 / 3 ≈ 64.67

Roland's overall grade is approximately 64.67. However, to determine if he will move on to Algebra 1B, we need to compare his grade to the passing grade requirement. Assuming the passing grade is 60%, Roland's overall grade of 64.67 is higher than the passing grade, so he will move on to Algebra 1B.

2. Shalyn's overall grade:

Again, assuming equal weighting, we'll calculate the average of the three grades.

(92 + 75 + 77) / 3 = 244 / 3 ≈ 81.33

the passing grade is 60%, Shalyn's overall grade of 81.33 is higher than the passing grade, so she will move on to Geometry.

To know more about Grade .

https://brainly.com/question/30268902

#SPJ11

The angle of rotation for a figure reflected in two lines that intersect to form a 72-degree angle is 144 degrees. The correct option is (c).

To find the angle of rotation for a figure reflected in two lines that intersect to form a 72-degree angle, follow these steps:

1: Identify the angle formed by the intersection of the two lines. In this case, it's 72 degrees.

2: The angle of rotation for a reflection in two lines is twice the angle between those lines.

3: Multiply the angle by 2. So, 72 degrees * 2 = 144 degrees.

Therefore, the angle of rotation for a figure reflected in two lines that intersect to form a 72-degree angle is (c) 144 degrees.

To know more about angle of rotation refer here :

https://brainly.com/question/14730449#

#SPJ11

(a) The height of the larger cylinder is 4 times the height of the smaller cylinder.

(b) The height of the larger cylinder will increase by a factor 4 when the diameters are different.

The volume of the smaller cylinder is given by:

V₁ = πr²h₁

where;

The volume of the larger cylinder is given by:

V₂ = πr²h₂

We know that V₂ is 4V₁;

πr²h₂ = 4πr²h₁

h₂ = 4h₁

The heights of the cylinders when the diameters are different;

πr₂²h₂ = 4πr₁²h₁

πd₂²h₂/4 = 4πd₁²h₁/4

πd₂²h₂= 4πd₁²h₁

h₂ = 4d₁²h₁/d₂²

Learn more about volume of cylinders here: https://brainly.com/question/9554871

#SPJ1

The minimum number of servers needed to keep the system stable is 1.

The arrival rate of customers, λ, is 5 per hour, which means that the average time between arrivals is

1/λ = 0.2 hours or 12 minutes.

The service time, μ, is given as 78 minutes per customer.

The stability condition for a single-server queue is

λ < μ,

which means that the arrival rate must be less than the service rate. In this case, the service rate is

1/μ = 0.0128 customers per minute.

Therefore, the stability condition becomes:

5/60 < 0.0128

which simplifies to:

0.0833 < 0.0128

Since the stability condition is not met with a single server, we need to add more servers to the system. For a multi-server queue, the formula for the effective service rate is:

μ' = μ × n

where n is the number of servers.

To find the minimum number of servers needed, we need to solve the following inequality:

λ < μ' = μ × n

5/60 < 78/60 × n

n > 5/78

n > 0.064

Since we cannot have a fractional number of servers, we need to round up to the nearest integer, which gives:

n = 1 server

Therefore, we need at least one server to keep the system stable.

For more such answers on servers

https://brainly.com/question/30172921

#SPJ11

On average, there are 6.5 customers in the system waiting for service.

To determine the minimum number of servers needed to keep the system stable, we can use the Little's Law.

It states that the average number of customers in a stable queueing system equals the arrival rate multiplied by the average time a customer spends in the system.

In this case, the arrival rate is five customers per hour, and the average service time is 78 minutes. We need to convert the service time to hours, so we divide it by 60:

78 minutes / 60 minutes per hour = 1.3 hours

Therefore, the average time a customer spends in the system is 1.3 hours. Using Little's Law, we can calculate the average number of customers in the system:

Average number of customers = Arrival rate x Average time in system

= 5 customers per hour x 1.3 hours

= 6.5 customers

This means that on average, there are 6.5 customers in the system waiting for service. To keep the system stable, we need to have enough servers to handle this demand. One way to determine the minimum number of servers needed is to use the Erlang-C formula, which takes into account the arrival rate, service time, and the number of servers.

However, without additional information about the desired level of service and queueing parameters such as patience of customers, it is difficult to provide an exact answer. In general, as the arrival rate and service time increase, the required number of servers also increases to keep the system stable.

To learn more about Littles' law, click here: https://brainly.com/question/29538196

#SPJ11

The three vectors u1,u2 and u3 are orthogonal.

To show that vectors u1 = (1,−2, 0), u2 = (2, 1, 0) and u3 = (0, 0, 2) form an orthogonal basis for [tex]R^3,[/tex] we need to verify that:

The three vectors are linearly independent

Any vector in [tex]R^3[/tex] can be expressed as a linear combination of the three vectors

The three vectors are orthogonal, i.e., their dot products are zero

We can check these conditions as follows:

To show that the three vectors are linearly independent, we need to show that the only solution to the equation a1u1 + a2u2 + a3u3 = 0 is a1 = a2 = a3 = 0.

Substituting the values of the vectors, we get:

a1(1,−2, 0) + a2(2, 1, 0) + a3(0, 0, 2) = (0, 0, 0)

This gives us the system of equations:

a1 + 2a2 = 0

-2a1 + a2 = 0

2a3 = 0

Solving for a1, a2, and a3, we get a1 = a2 = 0 and a3 = 0.

Therefore, the only solution is the trivial one, which means that the vectors are linearly independent.

To show that any vector in [tex]R^3[/tex] can be expressed as a linear combination of the three vectors.

we need to show that the span of the three vectors is R^3. This means that any vector (x, y, z) in [tex]R^3[/tex] can be written as:

(x, y, z) = a1(1,−2, 0) + a2(2, 1, 0) + a3(0, 0, 2)

Solving for a1, a2, and a3, we get:

a1 = (y + 2x)/5

a2 = (2y - x)/5

a3 = z/2

Therefore, any vector in [tex]R^3[/tex] can be expressed as a linear combination of the three vectors.

To show that the three vectors are orthogonal, we need to show that their dot products are zero. Calculating the dot products, we get:

u1 · u2 = (1)(2) + (−2)(1) + (0)(0) = 0

u1 · u3 = (1)(0) + (−2)(0) + (0)(2) = 0

u2 · u3 = (2)(0) + (1)(0) + (0)(2) = 0

Therefore, the three vectors are orthogonal.

Since the three conditions are satisfied, we can conclude that vectors u1, u2, and u3 form an orthogonal basis for [tex]R^3[/tex].

Learn more about orthogonal vectors

brainly.com/question/28503609

#SPJ11