b) Verify by calculation what volume of the base it should take to neutralize 50.0 mL of 0.1 M HCl (aq)
with 0.1 M NaOH(aq).

B) Verify By Calculation What Volume Of The Base It Should Take To Neutralize 50.0 ML Of 0.1 M HCl (aq)with

Answers

Answer 1

Answer:

50 ml

Explanation:

n = moles

c = concentration

v = volume

n = c × v

HCl + NaOH --> NaCl + H2O

HCl:

50 ml = 50 cm³ = 0.05 dm³

n = 0.05 × 0.1

n = 0.005

Ratio of HCl to NaOH:

HCl : NaOH

Based on reaction equation:

1 : 1

0.005 : x

x = 0.005

NaOH:

0.005 = 0.1 × v

v = 0.05

0.05 dm³ = 50 cm³ = 50 ml


Related Questions

300 ml of nitrogen react with 300 ml of hydrogen to form ammonia. N₂ + 3H₂ ---> 2NH3 What volume of ammonia will be formed, if the reaction gets over at the same temperature? a) 100 ml b) 200 ml c)300 ml d) 400 ml​

Answers

Answer:

According to the balanced chemical equation for the reaction:

N₂ + 3H₂ → 2NH₃

1 volume of nitrogen (N₂) reacts with 3 volumes of hydrogen (H₂) to form 2 volumes of ammonia (NH₃) at the same temperature and pressure.

Therefore, if 300 ml of nitrogen (N₂) reacts with 300 ml of hydrogen (H₂), the limiting reactant will be hydrogen, since it is present in the smallest amount. To find the volume of ammonia (NH₃) formed, we can use the volume ratio from the balanced chemical equation:

1 volume of N₂ + 3 volumes of H₂ → 2 volumes of NH₃

Since we have 300 ml of H₂, which is equivalent to 3 volumes of H₂, the maximum volume of ammonia (NH₃) that can be formed is:

2 volumes of NH₃ = 300 ml of H₂ × (2 volumes of NH₃ / 3 volumes of H₂) = 200 ml

Therefore, the correct option is (b) 200 ml.

Calculate Delta H r* n for Ca(s) + 1/2 * O_{2}(g) + C*O_{2}(g) -> CaC*O_{3}(s)

Answers

a. -813.4 kJ.  enthalpy of the reaction is -813.4 kJ

One of the characteristics of a thermodynamic system is enthalpy, which is calculated by multiplying the internal energy of the system by the sum of its pressure and volume. The total enthalpy of a system cannot be directly calculated because the internal energy's components are either unknown, hard to access, or unimportant to thermodynamics.The overall reaction can be represented as: [tex]Ca(s) +\frac{ 1}{2}O_2(g) + CO2(g) \rightarrow CaCO_3(s).[/tex]

The reaction enthalpy [tex](\Delta H_{rxn})[/tex]is the result of adding the reaction's separate enthalpies.The enthalpy of each of the individual reactions is given as:

[tex]Ca(s) + \frac{1}{2}0_2(g) \rightarrow Cao(s) \Delta H_{rxn} = -635.1 kJ CaCO_3(s) \rightarrow Cao(s) + CO2(g) \Delta H_{rxn} = 178.3 kJ[/tex]

Therefore, the overall enthalpy change for the reaction is given as:

[tex]\Delta H_{rxn} = \Delta H_{rxn}(Ca(s) +\frac{ 1}{2}0_2(g) \rightarrow Cao(s)) +\Delta H_{rxn} (CaCO_3(s) \rightarrow Cao(s) + CO2(g))[/tex]

[tex]\Delta H_{rxn} = -635.1 kJ + 178.3 kJ \Delta H_{rxn} = -813.4 kJ[/tex]

Therefore,The reaction's enthalpy is -813.4 kJ.

learn more about enthalpy Refer:brainly.com/question/13996238

#SPJ1

complete question:Calculate delta Hrxn for Ca(s) + 1/202(g) + CO2(g) => CaCO3(s) given the following set of reactions:  Ca(s) + 1/202(g) => Cao(s) delta Hrxn = -635.1 kJ CaCO3(s) => Cao(s) + CO2(g) delta Hrxn = 178.3 kJ  a. -813.4 kJ  

b. -456.8 kJ

c. 813.4 kJ

d 456.8 kJ

e. None of these is within 5% of the correct answer.

Cryolite, Na3AlF6(s),
an ore used in the production of aluminum, can be synthesized using aluminum oxide.

equation:

Al2O3(s)+6NaOH(l)+12HF(g)⟶2Na3AlF6+9H2O(g)

If 10.3 kg of Al2O3(s),
55.4 kg of NaOH(l),
and 55.4 kg of HF(g)
react completely, how many kilograms of cryolite will be produced?
mass of cryolite produced:

Answers

The mass (in kilograms) of Cryolite, Na₃AlF₆ produced, given that 10.3 Kg of Al₂O₃, 55.4 Kg of NaOH, and 55.4 Kg of HF react completely is 42.4 Kg

How do i determine the mass of Na₃AlF₆ produced?

The mass of Na₃AlF₆ produced from the reaction can be obtained as follow:

Al₂O₃(s) + 6NaOH(l) + 12HF(g) ⟶ 2Na₃AlF₆ + 9H₂O(g

Molar mass of Al₂O₃ = 102 g/molMass of Al₂O₃ from the balanced equation = 1 × 102 = 102 g = 102 / 1000 = 0.102 KgMolar mass of Na₃AlF₆ = 210 g/molMass of Fe from the balanced equation = 2 × 210 = 420 g = 420 / 1000 = 0.420 Kg

From the balanced equation above,

0.102 Kg of Al₂O₃ reacted to produce 0.420 Kg of Na₃AlF₆

Therefore,

10.3 Kg of Al₂O₃ will react to produce = (10.3 × 0.420) / 0.102 = 42.4 Kg of Na₃AlF₆

Thus, from the above calculation, it is evident that the mass of Na₃AlF₆ produced is 42.4 Kg

Learn more about mass produced:

https://brainly.com/question/9526265

#SPJ1

What is the amount of pi?

Answers

However, it is commonly approximated as 3.14159.

What is an irrational number ?

An irrational number is a number that cannot be expressed as a simple fraction or ratio of two integers. It is a non-repeating, non-terminating decimal. Examples of irrational numbers include pi (π), the square root of 2 (√2), and the golden ratio (∅).

What is a termination ?

In mathematics, a terminating decimal is a decimal number that has a finite number of digits after the decimal point, i.e., the decimal representation ends in a finite number of zeroes. For example, 0.75, 2.0, and 0.0625 are terminating decimals.

To know more about irrational visit :

https://brainly.com/question/15837135

#SPJ1

A container holds 0.25 moles of oxygen gas. What is the volume of the container if the gas is at room temperature and pressure?

Answers

The volume of the container is approximately 6.03 L if the oxygen gas is at room temperature and pressure.

What is pressure ?

Pressure is a physical quantity that measures the force exerted per unit area. It is a measure of how much force is distributed over a certain area. Pressure is important in many areas of science and engineering, including fluid mechanics, thermodynamics, and materials science.

At standard temperature and pressure (STP), which is commonly defined as a temperature of 0°C (273.15 K) and a pressure of 1 atm (101.3 kPa), the molar volume of any ideal gas is 22.4 L/mol. However, in this problem, we are given the amount of gas in moles and not at STP, so we need to use the ideal gas law to solve for the volume.

The ideal gas law is given by the equation:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant (0.08206 L·atm/(mol·K)), and T is the temperature in Kelvin.

We are given that the container holds 0.25 moles of oxygen gas. The temperature is not specified, but we are told that the gas is at room temperature, which is typically around 20°C (293.15 K). The pressure is also not specified, but we can assume that it is approximately equal to the standard atmospheric pressure of 1 atm.

Plugging in these values into the ideal gas law equation, we get:

V = (nRT)/P

V = (0.25 mol)(0.08206 L·atm/(mol·K))(293.15 K)/1 atm

V = 6.03 L

Therefore, the volume of the container is approximately 6.03 L if the oxygen gas is at room temperature and pressure.

To know more about Temperature visit :-

https://brainly.com/question/25677592

#SPJ1

Calculate the hydronium ion concentration, [H3O+], for a solution with a pH of 6.82.

[H₂0¹] =
M

Answers

The hydronium ion concentration, [H+] of a solution with a pH of 6.82 is 1.51 × 10-⁷ M.

How to calculate hydrogen ion concentration?

The hydrogen or hydronium ion concentration of a solution can be calculated from the pH using the following formula;

pH = - log {H+}

[H+] = 10−pH

by exponentiating both sides with base 10, we can "undo" the common logarithm.

{H+} = 10-⁶.⁸²

{H+} = 0.000000151356

[H+] = 1.51 × 10-⁷ M

Therefore, the hydronium ion concentration with a pH of 6.82 is 1.51 × 10-⁷ M.

Learn more about pH at: https://brainly.com/question/8065527

#SPJ1

Use the mole ratios from the chemical equation to answer the question:
C6H12O6 → 6C + 6H2 + 3O2
How many moles of carbon are produced?
6 moles C
2.5 moles C
30 moles C
15 moles C

Answers

The chemical equation C6H12O6 → 6C + 6H2 + 3O2 states that 6 moles of Carbon (C) are produced when 1 mole of C6H12O6 is reacted. So the correct answer is A)6 moles

This can be determined by using the mole ratios from the equation. The mole ratios show the amount of each substance that is used in the reaction and the amount that is produced. The equation states that for every 1 mole of C6H12O6, 6 moles of Carbon (C) are produced.
To determine the amount of Carbon produced, the mole ratio of Carbon can be used. In this case, the mole ratio is 6:1, meaning that 6 moles of Carbon are produced for every 1 mole of C6H12O6. This means that the answer to the question is 6 moles of Carbon.
In conclusion, the answer to the question "How many moles of carbon are produced?" is 6 moles of Carbon. This answer can be determined by using the mole ratios from the chemical equation C6H12O6 → 6C + 6H2 + 3O2, which states that for every 1 mole of C6H12O6, 6 moles of Carbon are produced. So the correct answer is A)6 moles

for more such questions on Carbon

https://brainly.com/question/27860158

#SPJ11

Using the following equation, determine whether the changes listed below will cause a shift in equilibrium to shift forward, reverse, or no shift at all.
A open parentheses a q close parentheses italic space plus space B open parentheses s close parentheses italic space rightwards harpoon over leftwards harpoon space straight C open parentheses straight s close parentheses space plus space straight D open parentheses aq close parentheses space plus space straight E open parentheses aq close parenthesesA(aq) + B (s) → D(aq) + E(aq)
Addition of A?
Addition of B?
Removal of C?
Removal of D?
Addition of E?
Removal of A?

Answers

The number of moles of A will decrease. This causes a decrease in pressure which will lead to a shift in equilibrium towards reactants.

Addition of A: The addition of A will cause the equilibrium to shift forward. This is because A is added to the reactants side, so the number of moles of A will increase. This causes an increase in pressure which will lead to a shift in equilibrium toward products. Addition of B: The addition of B will cause the equilibrium to reverse. This is because B is added to the product side, so the number of moles of B will increase. This causes an increase in pressure which will lead to a shift in equilibrium towards reactants. Removal of C: The removal of C will cause no shift in equilibrium. This is because C is removed from the reactants side, but the number of moles of C will remain unchanged. Removal of D: The removal of D will cause no shift in equilibrium. This is because D is removed from the product side, but the number of moles of D will remain unchanged.

Addition of E: The addition of E will cause the equilibrium to shift forward. This is because E is added to the product side, so the number of moles of E will increase. This causes an increase in pressure which will lead to a shift in equilibrium toward products. Removal of A: The removal of A will cause the equilibrium to reverse. This is because A is removed from the reactant's side.

To learn more about Equilibrium ;

https://brainly.com/question/19340344

#SPJ11

2H₂O₂(1) + N₂H₂(1)→ 4H₂O(g) + N₂ (g) determine how many grams of N₂ are produced from the reaction of 8.92 g of H₂O₂ and 5.53 g of N₂H4.​

Answers

Taking into account definition of reaction stoichiometry, 3.67 grams of N₂ are produced from the reaction of 8.92 g of H₂O₂ and 5.53 g of N₂H₄.

Reaction stoichiometry

The balanced reaction is:

2 H₂O₂ + N₂H₄ → 4 H₂O + N₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

H₂O₂: 2 molesN₂H₄: 1 moleH₂O: 4 moles N₂: 1 mole

The molar mass of the compounds is:

H₂O₂: 34 g/moleN₂H₄: 32 g/moleH₂O: 18 g/moleN₂: 28 g/mole

By reaction stoichiometry, the following mass quantities of each compound participate in the reaction:

H₂O₂: 2 moles ×34 g/mole= 68 gramsN₂H₄: 1 mole ×32 g/mole= 32 gramsH₂O: 4 moles ×18 g/mole= 68 gramsN₂: 1 mole ×28 g/mole= 28 grams

Definition of limiting reagent

The limiting reactant is the reactant that in a chemical reaction determines, discloses or limits the amount of product formed, and causes a specific or limiting concentration; that is, it is the reactant that produces the least amount of product.

Limiting reagent in this case

To determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 32 grams of N₂H₄ reacts with 68 grams of H₂O₂, 5.53 grams of N₂H₄ reacts with how much mass of H₂O₂?

mass of H₂O₂= (5.53 grams of N₂H₄×68 grams of K)÷32 grams of N₂H₄

mass of H₂O₂= 11.75 grams

But 11.75 grams of H₂O₂ are not available, 8.92 grams are available. Since you have less mass than you need to react with 5.53 grams of N₂H₄, H₂O₂ will be the limiting reagent.

Mass of N₂ formed

Considering the limiting reagent, the following rule of three can be applied: if by reaction stoichiometry 68 grams of H₂O₂ form 28 grams of N₂, 8.92 grams of H₂O₂ form how much mass of N₂?

mass of N₂= (8.92 grams of H₂O₂× 28 grams of N₂)÷68 grams of H₂O₂

mass of N₂= 3.67 grams

Finally, 3.67 grams of N₂ can be produced.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

What is the pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI? The Kb of trimethylamine, (CH3)3N, is 6.3 x 10-5. (value = 0.02)

Answers

The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.

What is pH?

To find the pH of the solution, we need to first determine if (CH3)3NHCI acts as an acid or base. Since (CH3)3NHCI is a salt composed of a weak base, trimethylamine, and a strong acid, hydrochloric acid (HCI), it will undergo hydrolysis in water.

The hydrolysis reaction is given by:

(CH3)3NH+ (aq) + H2O (l) ⇌ (CH3)3N (aq) + H3O+ (aq)

The Kb expression for the equilibrium reaction is:

Kb = [ (CH3)3N ] [ H3O+ ] / [ (CH3)3NH+ ]

Since (CH3)3NH+ and HCl dissociate completely in water, the initial concentration of (CH3)3NH+ is equal to the concentration of (CH3)3NHCI, which is 0.335 M.

Using the Kb value given, we can solve for the concentration of H3O+:

Kb = 6.3 x [tex]10^{-5}[/tex] = [ (CH3)3N ] [ H3O+ ] / 0.335

[ H3O+ ] = Kb x (CH3)3NH+ / (CH3)3N

[ H3O+ ] = 6.3 x [tex]10^{-5}[/tex] x 0.335 / 1

[ H3O+ ] = 2.1095 x [tex]10^{-6}[/tex] M

Finally, we can calculate the pH using the expression:

pH = -log [H3O+]

pH = -log (2.1095 x [tex]10^{-6}[/tex])

pH = 5.676

Therefore, the pH of the solution is approximately 5.676.

To know more about pH, visit:

https://brainly.com/question/15289741

#SPJ1

Complete question is: The pH of 0.335 M trimethylammonium chloride, (CH3)3NHCI is approximately 5.676.

Which of the following would give the highest pH when dissolved in water to form a 0.10 M solution? the potassium salt of a strong acid a strong acid the potassium salt of a weak acid

Answers

When dissolved in water to make a 0.10 M solution, the potassium salt of a strong acid would produce the highest pH of the available alternatives.

A potassium base and an acid react to generate the chemical known as the potassium salt. It is a form of salt, an ionic compound made up of negatively and positively charged ions known as anions and cations, respectively. Potassium salts are useful in a variety of industries, such as fertilisers, pharmaceuticals, and food processing. They are frequently utilised as sources of alkali metal in different chemical reactions or as supplements to give plants and animals more potassium. Depending on the exact acid and base that were used to create the salt, the properties of potassium salts can change, and the resulting salt can have distinct physical and chemical properties.

Learn more about the potassium salt here:

https://brainly.com/question/14385113

#SPJ4

Identify the Lewis acid and the Lewis base in each the following reactions. (Omit states of matter.) a. B(OH)2(aq) + H2O(l) + B(OH)4 - (aq) + H+ (aq) Acid: Base: b. H2O(1) + CN- (aq) + HCN(aq) + OH- (aq) Acid: Base: C. HgI,(s) +21+ (aq) → Hg1,2(aq) Acid: Base:

Answers

Base: Water, b. [tex]HCN[/tex] Acid Base [tex]OH-[/tex] , c. Base: I- Acid:[tex]HgI2[/tex] . Chemical substances known as acids have the ability to donate a proton [tex](H+)[/tex] to a base or another molecule.

Chemical substances known as acids have the ability to donate a proton [tex](H+)[/tex]  to a base or another molecule. They have a sour flavour, have the power to dissolve metals, and can make litmus paper turn red. On the pH scale, where 7 is neutral and lower numbers indicate higher acidity, acids have a pH below 7. Hydrochloric acid, sulfuric acid, and acetic acid are a few typical examples of acids. Acids are essential for many chemical processes, such as digestion, the creation of energy, and the synthesis of numerous significant chemicals. Also, they are employed in a number of sectors, such as industry, food production, and agriculture.

Learn more about  Acid Base here:

https://brainly.com/question/15717190

#SPJ4

is the energy of the surroundings increases for any chemical reactoin supported by the first law of thermodynamics

Answers

Yes, the increase in surrounding energy for any chemical reaction is supported by the first law of thermodynamics, which means that the total energy in the universe is constant.

Thermodynamics is the branch of science concerned with the study of heat changes in various chemical processes. There are four basic laws of thermodynamics named zeroth law, first law, second law, and third law which represents all changes in reaction.

The first law of thermodynamics states that "energy cannot be created or destroyed in a chemical reaction, but can be converted from one form to another", and if a system loses energy in the process, it can gain some through the environment.

It simply changes from one form to another, so the total energy of the universe is conserved.

For more information about first law of thermodynamics, visit :

https://brainly.com/question/30848251

#SPJ4

Complete question:

Is the energy of the surroundings increases for any chemical reaction supported by the first law of thermodynamics?

Can someone help me do a CER 8-10 sentences
No definition
No Go*gle

Answers

Answer:

Claim: Some species of crabs possess visual abilities that enable them to detect the movement of plankton in the water column, while others may rely more heavily on chemical cues and behavior to locate their prey.

Evidence: Studies have shown that certain species of crabs have eyes with adaptations that enhance their sensitivity to low light levels and allow them to detect small particles, such as plankton, in the water column. Other research has suggested that crabs also use chemical cues and behavior to locate their prey, such as creating small currents to direct plankton toward their mouthparts.

Reasoning: The ability of crabs to see the plankton they eat near the ocean floor is likely influenced by multiple factors, including visual acuity, chemical cues, and behavior. While some species of crabs may have visual capabilities that aid in the detection of plankton, it is unlikely that their vision is the sole determining factor in their feeding behavior. Rather, it is reasonable to conclude that crabs use a combination of senses and behaviors to locate and capture their prey.

In summary, the available evidence suggests that while crabs can see the plankton they eat near the ocean floor, the extent to which they rely on vision to locate their prey varies depending on the species and habitat in which they reside. Other factors, such as chemical cues and behavior, likely play an important role in the feeding behavior of crabs.

hown below is a Lewis structure of the formamidinium ion. What geometry is exhibited by the two nitrogens in the formamidinium ion? NH2A н-с NH2B Geometry at A (A) trigonal planar (B) trigonal planar (C) trigonal pyramidal Geometry at B trigonal planar trigonal pyramidal trigonal planar trigonal pyramidal (D) trigonal pyramidal
Previous question

Answers

The two nitrogens in the formamidinium ion exhibit a trigonal pyramidal geometry. The correct option is (C).


When analyzing the geometry exhibited by the two nitrogens in the formamidinium ion. Geometry is the configuration of a molecule or a compound that deals with the shapes of the individual atoms in relation to each other. The geometry of the molecule is determined by the number of lone electron pairs and bonded pairs of electrons available to it.

Lewis structure of the formamidinium ion is shown below:

NH2A н-с NH2B

This structure contains two nitrogen atoms, nitrogen A and nitrogen B. Nitrogen A has three lone electron pairs and one bonding pair of electrons, while nitrogen B has two bonding pairs of electrons and one lone electron pair.

As a result, nitrogen A has a trigonal pyramidal geometry, whereas nitrogen B has a trigonal planar geometry.

Therefore, the correct answer is option (C) trigonal pyramidal.

For more such questions on trigonal pyramidal , Visit:

https://brainly.com/question/22697472

#SPJ11

A sealed 1-L flask contains 0.50 mol SO3, 0.20 mol SO2, and 0.30 mol O2, which react according to the chemical equation
2SO3 (g) ⇌ 2SO2 (g) + O2 (g); Kc = 59. At equilibrium, [O2] = 0.52 M.
Select all the options that correctly interpret the data provided.

Answers

The given chemical equation represents a reversible reaction in which two molecules of sulfur trioxide (SO₃) react to form two molecules of sulfur dioxide (SO₂) and one molecule of oxygen gas (O₂).

What are the concentrations of SO₃, SO₂, and O₂at equilibrium?

The problem states that a 1-liter flask contains 0.50 moles of SO₃, 0.20 moles of SO₂, and 0.30 moles of O₂. These three substances react with each other to reach equilibrium, which can be determined using the equilibrium constant (Kc).

At equilibrium, the concentration of oxygen gas (O₂) is given as 0.52 M. This information can be used to calculate the concentrations of sulfur trioxide (SO₃) and sulfur dioxide (SO₂) at equilibrium using the equilibrium constant (Kc) and the initial concentrations of the reactants.

Using the given equation for the equilibrium constant and the initial concentrations of the reactants, we can write:

Kc = [SO₂]²[O₂] / [SO₃]²

Substituting the given values, we get:

59 = [0.20 mol/L]² (0.52 mol/L) / [0.50 mol/L]²

Solving for SO₃], we get:

[SO₃] = [tex]\sqrt{[(0.20 mol/L)² (0.52 mol/L) / 59] }[/tex]= 0.10 mol/L

Similarly, solving for [SO₂], we get:

[SO₂] = 2 [SO₃] = 0.20 mol/L

Therefore, at equilibrium, the concentrations of SO₃, SO₂, and O₂are 0.10 M, 0.20 M, and 0.52 M, respectively. This means that the reaction has favored the production of SO₂and O₂ over the reactant SO₃ at equilibrium.

To know more about equlibrium concentration, visit:

https://brainly.com/question/14050616

#SPJ1

Use formal charge to explain why the fulminate ion is less stable and therefore more reactive) than the cyanate ion. Match the items in the left column to the appropriate blanks in the sentences on the right. Reset Help more Each resonance contributor for the fulminate ion the octet less rule. the sum of the formal charges is -1 When comparing the electronegativity values, Nis electronegative than C, thus structures with a negative formal charge on C stable and structures with a positive formal charge on N are stable the octet rule is not obeyed are does not follow follows Given this information, the fulminate ion is unstable mainly because more resonance contributors are needed formal charge distribution is unfavored

Answers

The given statement is a correct explanation of why the fulminate ion is less stable and more reactive than the cyanate ion.

The formal charge can be defined as the difference between the number of valence electrons present in the free atom and the number of valence electrons present in the Lewis structure. A stable molecule has the lowest possible formal charge on each atom in its structure. Use formal charge to explain why the fulminate ion is less stable and therefore more reactive than the cyanate ion. The given statement can be explained as follows: When we analyze the formal charge of the fulminate ion, it becomes clear that the formal charge of the fulminate ion is +1 on nitrogen and -1 on two oxygens.

But when the electronegativity values are compared, nitrogen is found to be more electronegative than carbon, thus structures with a negative formal charge on C are stable and structures with a positive formal charge on N are stable. This means that the given octet rule is not obeyed, which leads to the instability of the fulminate ion. Since formal charge distribution is unfavored, this molecule is less stable and therefore more reactive. The resonance structure of the fulminate ion requires more resonance contributors to stabilize the molecule, and it does not obey the octet rule. Thus, it can be concluded that the fulminate ion is unstable mainly because it needs more resonance contributors and the formal charge distribution is unfavored.

To learn more about Fulminate :

https://brainly.com/question/21851188

#SPJ11

Suppose the concentration of the NaOH solution was 0.5 M instead of 0.1 M. Would this titration have required more, less, or the same amount of NaOH solution for a complete reaction?

Answers

Answer:

require less

Explanation:

If the concentration of the NaOH solution is increased from 0.1 M to 0.5 M, then the number of moles of NaOH present in a given volume of solution will increase by a factor of 5. This means that the same volume of 0.5 M NaOH solution will contain 5 times more moles of NaOH than the same volume of 0.1 M NaOH solution.

In a titration, the amount of NaOH solution required to reach the endpoint is determined by the amount of HCl present in the solution being titrated. If the concentration of NaOH is increased, then fewer moles of NaOH will be required to neutralize the same number of moles of HCl.

Therefore, if the concentration of the NaOH solution was increased from 0.1 M to 0.5 M, then the titration would require less NaOH solution for a complete reaction.

Enter your answer in the provided box.

Answer the following questions about the fermentation of glucose (C6H12O6, molar mass 180.2 g/mol) to ethanol (C2H6O) and CO2.

C6H12O6(s) → 2 C2H6O(l) + 2 CO2(g) ΔH = −16 kcal/mol
glucose ethanol

How many kilocalories of energy are released from 40.0 g of glucose?

kcal of energy released

Report answer to TWO significant figures.

Answers

Answer:

Explanation:

40/ 180.2 x (-16 / 1 mole glucose)=-3.6 KJ

What is the bond angle of carbonothioyl dibromide
Also what is the molecular shape

Answers

Answer:

Carbonothioyl dibromide, also known as CBr2S, has a bond angle of approximately 109.5 degrees, which is the typical tetrahedral bond angle for molecules with sp3 hybridization.

The molecular shape of CBr2S is also tetrahedral, with the two bromine atoms and the sulfur atom arranged at the corners of a tetrahedron, and the carbon atom at the center.

Part A Find the magnitude of the electric force, ignoring the sign, that the water molecule exerts on the chlorine ion. The dipole moment of the water molecule (H2O) is 6.17 x 10-30 C.m. Consider a water molecule located at the origin whose dipole moment p points in the positive x direction. A chlorine ion (C1_), of charge – 1.60 x 10-19 C, is located at x = 3.00 x 10–9 meters. Assume that this x value is much larger than the separation d between the charges in the dipole, so that the approximate expression for the electric field along the dipole axis can be used. ► View Available Hint(s) = Η ΑΣΦ J ? a 18 xa Хь vx x x х х |X| ] X.10n 6 x x N Submit Previous Answers

Answers

The magnitude of the electric force that the water molecule exerts on the chlorine ion is 1.08×10-58 N.

The first thing we need to know is that:

Electric force is given by;

[tex]F=kq1q2d2[/tex]

Where, k=Coulomb's constant=9×109, N⋅m2⋅C-2q1 and q2 are charges, d is distance between charges, thus this formula applies to point charges. However, in this question, we are not given point charges, but a dipole moment.

So we can use the equation:

[tex]F=E2p[/tex]

where, E is the electric field and, p is the dipole moment. Thus, to find the magnitude of the electric force that the water molecule exerts on the chlorine ion, we have to calculate the electric field of the dipole moment at the location of the chlorine ion, and then multiply the result by the magnitude of the dipole moment.

Part B:

Electric field of a dipole moment at any point on the axial line is given by;

[tex]E=2kp cosθr3[/tex]

where, k is Coulomb's constant,θ is the angle between the dipole moment and the axial line, and, r is the distance from the center of the dipole moment to the point where the electric field is measuredcosθ=1, because the angle between the dipole moment and the axial line is 0°.

Thus, we have;

[tex]E=2kp r3[/tex]

where, p is the magnitude of the dipole moment, r is the distance between the center of the dipole moment and the point where the electric field is measured.

Therefore, at the location of the chlorine ion, we have;

r=3.00×10-9m

Applying the formula for electric field

[tex]E=2kp r3E[/tex]

=2(9×109 N⋅m2⋅C-2)(6.17×10-30 C⋅m)(3.00×10-9m)3

=1.25×10-4 N/C

Thus, the magnitude of the electric force that the water molecule exerts on the chlorine ion is given by;

F=E2p

F=(1.25×10-4 N/C)2(6.17×10-30 C⋅m)

F=1.08×10-58 N

Therefore, the magnitude of the electric force that the water molecule exerts on the chlorine ion is 1.08×10-58 N.

For more such questions on metabolism , Visit:

https://brainly.com/question/31216722

#SPJ11

2ca + o2 - 2cao identify the oxidizing and reducing agents

Answers

Answer:

Ca is a reducing agent and O is the oxidizing agent.

Explanation:

calcium is the reducing agent as it reduces oxygen while it oxidize itself and oxygen is an oxidising agent because it oxidized others and reduces itself. in this equation oxygen is reducing and Calcium is oxidising. and as it is stated in the definition that oxidizing agent is the agent which oxidises others and reduces itself and it is also stated that reducing agent reduces others and oxidize itself. so based on this statement calcium is reducing agent and O is a oxidizing agent.

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as A an atom. B a lone pair of electrons. C a valence electron. D either an atom or a valence electron. E either an atom or a lone pair of electrons.

Answers

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as  either an atom or a lone pair of electrons. The correct option is (E).

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as a combination of atoms and/or lone pairs of electrons. An atom is a single atom, and a lone pair of electrons is two electrons that form a pair. A valence electron is a single electron in an atom's outermost shell, and therefore it cannot form a group on its own.
In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as either an atom or a lone pair of electrons.

The valence shell electron pair repulsion (VSEPR) theory is a model in chemistry that is used to forecast the geometry of different molecules. It is based on the idea that the atoms and lone pairs in the outer shell of a molecule are repelled by one another, and so move as far away from each other as possible. This rule is used to determine the 3D geometry of a molecule.

In the valence shell electron pair repulsion (VSEPR) theory, a group is defined as either an atom or a lone pair of electrons. The VSEPR theory considers that the most stable molecular structure is one that has the least amount of electron pair repulsion among its valence electrons. VSEPR theory gives us a clue about the geometry of the molecule. The molecular geometry of the molecule is determined by the electron groups, whether they are bonding electrons or lone pair electrons.

For instance, if there are three electron groups on a central atom, it would adopt a trigonal planar geometry. So, The correct option is (E).

For more such questions on (VSEPR) theory , Visit:

https://brainly.com/question/10271048

#SPJ11

There are two naturally occurring isotopes of uranium. Uranium-238 and uranium-235. Uranium-238 has a percent abundance of 99.7% uranium-235 had a percent abundance of 0.3%. What is the atomic mass of uranium?

Answers

The atomic mass of uranium would be approximately 238.453 u.

Atomic mass calculation

To calculate the atomic mass of uranium, we need to take into account the percent abundance and mass of each isotope.

The atomic mass of an element is calculated by taking the weighted average of the masses of each isotope, where the weighting factor is the percent abundance of each isotope.

Let's begin by calculating the contribution of each isotope to the atomic mass of uranium:

Uranium-238 (238.050788 u): 99.7% abundanceUranium-235 (235.043929 u): 0.3% abundance

To calculate the atomic mass, we can multiply the mass of each isotope by its percent abundance (in decimal form), and then add the products together:

Atomic mass of uranium = (238.050788 u x 0.997) + (235.043929 u x 0.003)

Atomic mass of uranium = 237.748013 u + 0.705132 u

Atomic mass of uranium = 238.453 u

Therefore, the atomic mass of uranium is approximately 238.453 u.

More on atomic mass can be found here: https://brainly.com/question/17067547

#SPJ1

consider the following reaction: compound 5.69 205.0 213.6 what is the standard free energy of the reaction at ?

Answers

The standard free energy of the reaction at 23.0 °C is -394.4 kJ/mol, which can be calculated using the Gibbs free energy equation and substituting the given values for standard enthalpy change, standard entropy change, and temperature in Kelvin.

To find the standard free energy of the reaction at 23.0 °C, we can use the Gibbs free energy equation:

ΔG° = ΔH° - TΔS°

where ΔH° is the standard enthalpy change, ΔS° is the standard entropy change, T is the temperature in Kelvin, and ΔG° is the standard free energy change.

First, we need to convert the temperature to Kelvin:

T = 23.0 + 273.15 = 296.15 K

Next, we can substitute the values given in the question:

ΔH° = -393.5 kJ/mol

ΔS° = (213.6 J/K/mol) - [(5.69 J/K/mol) + (205.0 J/K/mol)] = 2.91 J/K/mol

T = 296.15 K

ΔG° = (-393.5 kJ/mol) - (296.15 K)(2.91 J/K/mol)

ΔG° = -393.5 kJ/mol - 862.25 J/mol

ΔG° = -394.4 kJ/mol

Therefore, the standard free energy of the reaction at 23.0 °C is -394.4 kJ/mol.

Learn more about thermodynamics here: brainly.com/question/30207871

#SPJ4

Complete question is in the image attached below

The titration of 45.0 ml of an unknown triprotic acid required 32.71 ml of 0.37 M KOH to
reach the endpoint. What is the molarity of the unknown acid?

Answers

The molarity of the unknown triprotic acid is 0.269M.

How to calculate molarity?

Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.

The molarity of the unknown acid can be calculated using the following formula:

CaVa = CbVb

Where;

Ca and Va = acid concentration and volume respectivelyCb and Vb = base concentration and volume respectively

According to this question, the titration of 45.0 ml of an unknown triprotic acid required 32.71 ml of 0.37 M KOH to reach the endpoint.

45 × Ca = 32.71 × 0.37

45Ca = 12.1027

Ca = 0.269M

Learn more about molarity at: https://brainly.com/question/8732513

#SPJ1

Who developed the philosophical idea of the atom

Answers

Answer:

Democritus of Abdera

Explanation:

Leucippus of Miletus (5th century bce) is thought to have originated the atomic philosophy. His famous disciple, Democritus of Abdera, named the building blocks of matter atomos, meaning literally “indivisible,” about 430 bce.

How many moles of HCl will be produced when 873 g of AlCl3 are reacted according to this chemical equation?

2AlCl3 + 3H2O --> Al2O3 + 6HCl

Answers

19.641 moles of HCl will be produced when 873 g of AlCl₃ are reacted according to this chemical equation.

What is the number of moles of HCl produced?

To determine the number of moles of HCl produced, we need to first calculate the number of moles of AlCl₃ using its molar mass and the given mass:

Molar mass of AlCl₃ = 133.34 g/mol

Number of moles of AlCl₃ = 873 g / 133.34 g/mol = 6.547 moles

From the balanced chemical equation, we can see that 2 moles of AlCl₃ reacts to form 6 moles of HCl.

So, we can use this ratio to determine the number of moles of HCl produced:

Number of moles of HCl = (6.547 mol AlCl₃) x (6 mol HCl / 2 mol AlCl₃) = 19.641 moles

Learn  more about number of moles here: https://brainly.com/question/13314627

#SPJ1

Determine the pressure (in atm) of a 7.16-g sample of He gas at 692 K in a container with a volume of 55.9 L.

Answers

Answer:

1.82 atm

Explanation:

Ideal gas law

P=nRT/V

1) solve for n which is moles

7.16 / 4 = 1.79 mole He

2)

n=1.79

R=0.0821

T=692 K

V=55.9

P=1.79 X 0.0821 X 692 / 55.9 =1.82 atm

Calculate the percent dissociation of acetic acid (CH,CO,H) in a 0.60 mM aqueous solution of the stuff. You may find some useful data in the ALEKS Data resource. Round your answer to 2 significant digits. 1% x10 Х ?
Previous question

Answers

The percent dissociation of acetic acid (CH,CO,H) in a 0.60 mM aqueous solution is 98.38%.

When 0.60 mM of acetic acid (CH3COOH) is dissolved in water, it dissociates according to the following equation:

CH3COOH(aq) ↔ H+(aq) + CH3COO-(aq)

The percent dissociation of acetic acid (CH3COOH) in the aqueous solution is calculated using the following equation:

% dissociation = [H+]/[CH3COOH] × 100

where [H+] is the concentration of the hydrogen ion and [CH3COOH] is the concentration of the acetic acid.

1. To calculate the concentration of the hydrogen ion in the solution, we need to use the equilibrium constant expression for the dissociation of acetic acid, which is:

Ka = [H+][CH3COO-]/[CH3COOH]

where Ka is the acid dissociation constant for acetic acid.

2. To calculate the concentration of the hydrogen ion in the solution, we need to use the quadratic formula, since the dissociation of acetic acid is incomplete:

% dissociation = (1 - α) × 100

where α is the degree of dissociation of acetic acid.

Since α is small, we can assume that the change in the concentration of acetic acid is negligible.

Thus,[H+] = α[CH3COOH]

3. Substituting the values, we get:

Ka = [H+][CH3COO-]/[CH3COOH][H+] = Ka × [CH3COOH]/[CH3COO-]α = [H+]/[CH3COOH] = Ka × [CH3COOH]/([CH3COOH] + [CH3COO-])α

= (1.74 × 10-5) × (0.60 × 10-3)/(0.60 × 10-3 + 0.64 × 10-3)α

= 0.0162% dissociation

= (1 - α) × 100% dissociation

= (1 - 0.0162) × 100% dissociation

= 98.38%

The percent dissociation of acetic acid (CH3COOH) in the aqueous solution is 98.38%.

For more such questions on dissociation , Visit:

https://brainly.com/question/9396848

#SPJ11

Other Questions
what is the hybridization of the oxygen atom in a water molecule? an aqueous solution is known to contain pb2 , cu2 , and na ions. treatment of the sample with both naoh and licl solution produces a precipitate. which of the metal cations does the solution contain? explain your response According to Schaie's research, the cross-sectional approach shows a ______ in inductive reasoning with age; while the longitudinal approach shows a ______ of inductive reasoning in middle adulthood. why does tom attack myrtle at the end of the party Why is pi important in math? a cell with two complete sets of chromosomes is a cell. what are the relation between point and circle assume a marketing campaign targets the market of consumers who have already purchased their product. which market segment is the company targeting? Place the steps of the marketing research approach in the correct order. NOTE: The first step should be the top item in your list.1. Define the problem2. Develop the research plan3. Collect relevant information4. Develop findings5. Take marketing actions Alice holds a small battery operated device used for tuning instruments that emits the frequency of middle C (262 Hz) while walking with a constant speed of 4.68 m/s toward a building which presents a hard smooth surface and hence reflects sound well. (Use343 m/s as the speed of sound in air.)(a) Determine the beat frequency Alice observes between the device and its echo. (Enter your answer to at least 1 decimal place.)(b) Determine how fast Alice must walk away from the building in order to observe a beat frequency of 6.19 Hz. jem is changing and growing up and trying to live up to the idea of being a gentlemen, what does this idea mean? what is the name of the event that sold weapons to iran to free hostages and using the money to fund war in central america HELP ASAP Do a quick internet search for personal values and select the ones that speak to you the most. Choose 5-10 of your listed values and reflect on how they impact your health practices and behaviors. Write a 200- to 250-word reflection about how each of these values influences your personal health. The point of view in the excerpt best supports which of the following historical arguments about United States involvement in the First World War before 1917 ? in parts of canada, you will find both english-speaking communities and french-speaking communities. this illustrates that language helps shape the way people perceive the world, and it also helps define blank . 6. Which of the following is an example of secondary source of collecting data used in academic writing? a. responses to questionnaire c. views of informants b. research articles d. field survey information OIL [Questions 7-10] You're studying a population in which there are three alleles for gene A(a1,a, and a3). At the beginning of your study, each allele was present in equal numbers of individuals. Lab studies find that the genotype at this locus has no measurable effect on an individual's fitness. As you monitor the population over time, you see the frequency of a1 and a3 eventually drop to0%. For each of the following statements, mark A for True or B for False: 7. Assortative mating is the most likely reason that allelesa1anda3became lost. 8. Allelesa1and a3 must be associated with an increased mutation rate. 9. Individuals that are homozygous for a 2 must have a selective advantage in this population. 10. Alleles a 1 and a 3 alleles may have become lost from the population due to genetic drift. what standards are applicable for a compilation of the historical financial statements of a nonissuer? statements on standards for accounting and review services (ssarss). generally accepted auditing standards (gaas). statements on standards for attestation engagements (ssaes). statements on auditing standards (sass). 12. Another editor to make a web page is called __________ which allows a web page to be created visually. I NEED HELP BAD [o[2]. [2] A parachute opens during the spacecrafts descent through the atmosphere. Figure 2 shows the parachutespacecraft system, with the open parachute displacingthe atmospheric gas. This causes the system to decelerate. Figure 2_-- displacement of gasparachute \direction \of travel \/. . ~ spacecraftdisplacement of gasExplain, with reference to Newton's laws of motion, why displacing the atmosphericgas causes a force on the system and why this force causes the system todecelerate. [4 marks]