Calculate the voltage of the following cells
Zn|Zn^2+(0.20M)||Cu^2+(0.10M)|Cu

Answers

Answer 1

The voltage of the given cell is approximately 1.0704 V.

To calculate the voltage of the given cell, we can use the Nernst Equation:

E_cell = E°_cell - (RT/nF) * ln(Q)

Where:

E°_cell = standard cell potential
R = gas constant (8.314 J/mol*K)
T = temperature in Kelvin (usually 298 K)
n = number of moles of electrons transferred (2 for Zn and Cu)
F = Faraday's constant (96485 C/mol)
Q = reaction quotient, [Cu²⁺]/[Zn²⁺]

First, we need to find the E°_cell for the given reaction, which is the difference in standard reduction potentials:

E°_cell = E°_Cu - E°_Zn

The standard reduction potentials for the half-reactions are:

E°_Cu = +0.34 V (for Cu²⁺ + 2e⁻ → Cu)

E°_Zn = -0.76 V (for Zn²⁺ + 2e⁻ → Zn)

Therefore,

E°_cell = (+0.34 V) - (-0.76 V)

           = +1.10 V

Now, we can calculate Q:

Q = [Cu²⁺]/[Zn²⁺]

   = (0.10 M)/(0.20 M)

   = 0.5

Now, plug all the values into the Nernst Equation:

E_cell = 1.10 V - (8.314 J/mol*K * 298 K)/(2 * 96485 C/mol) * ln(0.5)

E_cell ≈ 1.10 V - 0.0296 V

          = 1.0704 V

To know more about cell voltage, click below.

https://brainly.com/question/31392821

#SPJ11


Related Questions

On paper, draw Lewis structures for the following molecules or polyatomic ions. Show all lone pairs and include any non-zero formal charges. Draw all reasonable resonance structures where appropriate.
SF6, NO2-, C2H3O2- (acetate ion), H3PO4, N2O
Please leave an explanation if possible!

Answers

Lewis structures, also known as Lewis dot structures, are diagrams that show the bonding between atoms and the distribution of valence electrons in a molecule or polyatomic ion.

The Lewis structures for the given molecules and polyatomic ions, along with their resonance structures where applicable:

[tex]SF_6[/tex]:

Sulfur hexafluoride ([tex]SF_6[/tex]) has 6 fluorine atoms bonded to a central sulfur atom. To draw the Lewis structure, we first add up the valence electrons of all atoms in the molecule:

6 (F) + 1 (S) = 7 valence electrons

The Lewis structure of [tex]SF_6[/tex] is:

   F     F

    \   /

     S= F

    /   \

   F     F

The Lewis structures for the given molecules and polyatomic ions, along with their resonance structures where applicable:

[tex]SF_6[/tex]:

Sulfur hexafluoride ([tex]SF_6[/tex]) has 6 fluorine atoms bonded to a central sulfur atom. To draw the Lewis structure, we first add up the valence electrons of all atoms in the molecule:

6 (F) + 1 (S) = 7 valence electrons

The Lewis structure of [tex]SF_6[/tex] is:

   F     F

    \   /

     S= F

    /   \

   F     F

Each of the six fluorine atoms is singly bonded to the central sulfur atom, which has six valence electrons. The sulfur atom also has two lone pairs of electrons, one above and one below the plane of the molecule, making its electron geometry octahedral.

[tex]NO_2^-[/tex]:

The nitrite ion ([tex]NO_2^-[/tex]) has a central nitrogen atom bonded to two oxygen atoms and carrying a negative charge. To draw the Lewis structure, we first add up the valence electrons of all atoms in the ion:

5 (N) + 2(2 x O) + 1 (extra electron) = 18 valence electrons

The Lewis structure of [tex]NO_2^-[/tex] is:

      O

      |

   O = N

      |

      O (-)

The nitrogen atom is double-bonded to one of the oxygen atoms and single-bonded to the other, with a lone pair of electrons on the nitrogen atom. The extra electron gives the ion a negative charge, which is placed on the oxygen atom to minimize formal charge. This structure has resonance, as shown below:

      O

      ||

   O = N

      |

      O (-)

In this resonance structure, the double bond is between the nitrogen and the other oxygen atom. Both structures contribute to the overall stability of the ion.

[tex]C_2H_3O_2^-[/tex] (acetate ion):

The acetate ion ([tex]C_2H_3O_2^-[/tex]) has a central carbon atom bonded to two oxygen atoms and one hydrogen atom, with an overall negative charge. To draw the Lewis structure, we first add up the valence electrons of all atoms in the ion:

2 (C) + 3 (H) + 2(2 x O) + 1 (extra electron) = 12 valence electrons

The Lewis structure of [tex]C_2H_3O_2^-[/tex] is:

     O (-)

      |

   O = C - H

      |

      O

The carbon atom is double-bonded to one of the oxygen atoms and single-bonded to the other, with a lone pair of electrons on the carbon atom. The extra electron gives the ion a negative charge, which is placed on the oxygen atom to minimize formal charge.

[tex]H_3PO_4[/tex]:

Phosphoric acid ([tex]H_3PO_4[/tex]) has a central phosphorus atom bonded to four oxygen atoms and three hydrogen atoms. To draw the Lewis structure, we first add up the valence electrons of all atoms in the molecule:

1 (P) + 3 (H) + 4(2 x O) = 16 valence electrons

The Lewis structure of[tex]H_3PO_4[/tex] is:

     H     H

      |    |

   H--P----O

      |    |

      O    O

[tex]N_2O[/tex]:

   O(-1)

    |

N == N

    |

   O

Dinitrogen monoxide ([tex]N_2O[/tex]) has two nitrogen atoms bonded to one oxygen atom. Each nitrogen has five valence electrons and the oxygen has six, so a total of 16 electrons are needed to form the Lewis structure. One nitrogen forms a triple bond with the oxygen, and the other nitrogen forms a single bond with the same oxygen. The negative charge is on the oxygen. The molecule has a resonance structure where the single bond can switch between the two nitrogen atoms.

For more such questions on Lewis structures , Visit:

https://brainly.com/question/20300458

#SPJ11

according to the ipcc, one molecule of methane (ch4) is 86 times more potent as a greenhouse gas than a molecule of carbon dioxide (co2). what does it mean to say that methane is a greenhouse gas?

Answers

To say that methane (CH4) is a greenhouse gas means that it has the ability to trap heat in the Earth's atmosphere, contributing to the greenhouse effect. The greenhouse effect is a natural process that helps to maintain the Earth's temperature and make it suitable for life. However, the increased concentration of certain greenhouse gases, including methane, can enhance this effect and lead to global warming.

Methane is particularly potent as a greenhouse gas because it has a higher heat-trapping capacity per molecule compared to carbon dioxide (CO2). The statement that one molecule of methane is 86 times more potent than a molecule of carbon dioxide means that methane has a significantly greater ability to absorb and re-emit infrared radiation, which leads to a stronger warming effect.

The impact of methane on global warming is influenced by both its potency and its concentration in the atmosphere. While methane is present in lower concentrations compared to carbon dioxide, its high potency makes it an important target for climate change mitigation efforts.

Learn more about greenhouse gases and their role in climate change

https://brainly.com/question/14131369?referrer=searchResults

#SPJ11.

Identify the intermediate in the reaction of an alkene with diazomethane. A. Cation B. Radical C. Carbene D. Anion

Answers

The intermediate in the reaction of an alkene with diazomethane is a carbene. Here's a step-by-step explanation:

1. Diazomethane (CH2N2) is a compound that can act as a carbene precursor, meaning it can generate a carbene species upon decomposition.

2. When diazomethane decomposes, it forms a carbene intermediate, which is a neutral species with a divalent carbon atom that has a lone pair of electrons and an empty p orbital. In the case of diazomethane, the carbene produced is a methylene carbene (CH2).

3. The carbene intermediate (CH2) can then react with the alkene by inserting itself into the alkene's carbon-carbon double bond.

4. This insertion process results in the formation of a cyclopropane ring, as the carbene carbon atom forms single bonds with both carbon atoms of the alkene.

In summary, the intermediate in the reaction of an alkene with diazomethane is a carbene (option C). The carbene forms during the decomposition of diazomethane and reacts with the alkene to form a cyclopropane ring.

To know more about Diazomethane visit-

brainly.com/question/31313695

#SPJ11

how many electrons are transferred in the following reaction? cr2o72– 14h 6cl– → 2cr3 3cl2 7h2o

Answers

In the given reaction, a total of 6 electrons are transferred when dichromate ion reacts to form chromium(III) and chlorine.

How many electrons participate in the reaction?

To determine the number of electrons transferred in the given reaction, we need to balance the oxidation states of the elements involved.

In the dichromate ion (Cr₂ O₇ [tex]-2[/tex]), each chromium atom has an oxidation state of +6, while each oxygen atom has an oxidation state of -2. The overall charge of the ion is 2-.

In the products, each chromium atom in Cr₃  has an oxidation state of +3, while each chlorine atom in Cl₂  has an oxidation state of 0. The hydrogen atoms in H₂O have an oxidation state of +1, and each oxygen atom in H₂O has an oxidation state of -2.

By comparing the oxidation states of chromium in the reactant (Cr₂O₇ [tex]-2[/tex]) and the products (Cr₃ ), we can see that each chromium atom has gained 3 electrons.

Since there are two chromium atoms in the reactant, the total number of electrons transferred is:

2 chromium atoms × 3 electrons/atom = 6 electrons

Therefore, 6 electrons are transferred in the given reaction.

Learn more about electrons

brainly.com/question/12001116

#SPJ11

Find the ph of a buffer that consists of 0.91 m hbro and 0.49 m kbro (pka of hbro = 8.64).

Answers

To find the pH of a buffer consisting of 0.91 M HBrO and 0.49 M KBrO with a pKa of 8.64, you can use the Henderson-Hasselbalch equation. The equation is:

pH = pKa + log10([A-]/[HA])

Where:


- pH is the pH of the buffer solution


- pKa is the acid dissociation constant (8.64 in this case)


- [A-] is the concentration of the conjugate base (KBrO, 0.49 M)


- [HA] is the concentration of the weak acid (HBrO, 0.91 M)


Now, plug in the values into the equation:

pH = 8.64 + log10(0.49/0.91)

Calculate the log value:

pH = 8.64 + log10(0.5385)

pH = 8.64 + (-0.269)

Finally, add the pKa and the calculated log value:

pH = 8.64 - 0.269 = 8.371

Therefore, the pH of the buffer that consists of 0.91 M HBrO and 0.49 M KBrO with a pKa of 8.64 is approximately 8.37.

To know more about  Henderson-Hasselbalch equationrefer here

https://brainly.com/question/13423434#

#SPJ11

An atom of 51K has a mass of 50.975828 amu.
mass of1H atom = 1.007825 amu
mass of a neutron = 1.008665 amu
Calculate the binding energy in kilojoule per mole.

Answers

So, the binding energy in kilojoules per mole is 12.13 kJ/mol.  

The binding energy per mole is a measure of the energy required to disassemble a molecule into its individual atoms, and is commonly used in chemistry to describe the stability of molecules.

The atomic number (Z) of an element is the number of protons in its nucleus, and is used to identify the element. The atomic mass (A) of an element is the mass of the nucleus plus the mass of the electrons, and is expressed in atomic mass units (amu).

The binding energy per mole can be calculated using the formula:

Binding energy (kJ/mol) = (Atomic number * atomic mass) / (3 * Avogadro's number)

Where Atomic number = 51, Atomic mass = 50.975828 amu

Atomic number = 51, Atomic mass = 50.975828 amu

Atomic number = 51, Atomic mass = 50.975828 amu

(51 * 1.008665) / [tex](3 * 6.022 x 10^{23})[/tex]

= 12.13 kJ/mol

Learn more about binding energy visit: brainly.com/question/23020604

#SPJ4

On average, a middle school girl should eat between 1,600 and 2,00 calories each day. If your lunch each day was 400 calories, do your total calories fall between 1,600 and 2,00 calories everyday? Why do you think they did/did not? Explain your answer.

Answers

Answer:

no I'm about to say we will be didn't 1,600 we will 500

The percentage yield for the following reaction is 81.8%.

PCl3 + Cl2 → PCl5

What mass of PCl5 is expected from the reaction of 80.1 g PCl3 with excess chlorine?

Answers

The expected mass of PCl₅ from the reaction of 80.1 g of PCl₃ with excess chlorine is 121.34 g.

To calculate the expected mass of PCl₅ from the reaction, we need to consider the molar masses and the stoichiometry of the reaction. Here's how you can calculate it:

Determine the molar masses:

PCl₃ (Phosphorus trichloride) = 137.33 g/mol

Cl₂ (Chlorine) = 70.90 g/mol

PCl₅ (Phosphorus pentachloride) = 208.24 g/mol

Convert the given mass of PCl₃ to moles:

Moles of PCl₃ = Mass of PCl₃ / Molar mass of PCl₃

Moles of PCl₃ = 80.1 g / 137.33 g/mol

Use stoichiometry to determine the moles of PCl₅ formed:

From the balanced equation, we can see that the ratio of moles of PCl₃ to PCl₅ is 1:1. So, the moles of PCl₅ formed will be the same as the moles of PCl₃.

Calculate the expected mass of PCl₅:

Mass of PCl₅ = Moles of PCl₅ × Molar mass of PCl₅

Mass of PCl₅ = Moles of PCl₃ × Molar mass of PCl₅

Since the moles of PCl₅ formed is equal to the moles of PCl₃.

Substitute this value into the equation:

Mass of PCl₅ = Moles of PCl₃ × Molar mass of PCl₅

Mass of PCl₅ = (80.1 g / 137.33 g/mol) × 208.24 g/mol

Calculate the expected mass of PCl₅:

Mass of PCl₅ = 80.1 g × (208.24 g/mol / 137.33 g/mol)

Mass of PCl₅ ≈ 121.34 g

Therefore, the expected mass of PCl₅ from the reaction of 80.1 g of PCl₃ with excess chlorine is approximately 121.34 g.

know more about molar masses here:

https://brainly.com/question/837939

#SPJ11

Write the structural formula for a compound that would yield a positive test for carboxylic acid but would not be wate rosluble.

Answers

A compound that would yield a positive test for carboxylic acid but would not be water-soluble is a long-chain carboxylic acid.

An example of such a compound is stearic acid (C17H35COOH). The structural formula for stearic acid is:

CH3(CH2)16COOH

This compound contains a carboxylic acid group (-COOH) which is responsible for the positive test for carboxylic acid. However, due to its long hydrocarbon chain, it has limited solubility in water, making it not water-soluble.

To learn more about compound, refer below:

https://brainly.com/question/13516179

#SPJ11

identify which compound is more acidic and explain your choice: acetophenone or benzaldehyde

Answers

Benzaldehyde is more acidic than acetophenone because its conjugate base is more stable, allowing for better delocalization of the negative charge over the entire phenyl ring.

To determine which compound is more acidic between acetophenone and benzaldehyde, we need to consider their molecular structures and the stability of their conjugate bases.

Understand the molecular structures of acetophenone and benzaldehyde.
Acetophenone has a structure of C6H5C(O)CH3, where a carbonyl group is attached to a methyl group and a phenyl group. Benzaldehyde has a structure of C6H5CHO, where a carbonyl group is directly attached to a phenyl group.

Consider the stability of their conjugate bases.
When a compound loses a hydrogen ion (H+), it forms a conjugate base. A more stable conjugate base indicates a more acidic compound. The conjugate bases of acetophenone and benzaldehyde are formed by losing a hydrogen ion from their carbonyl groups, resulting in a negative charge on the oxygen atom.

Compare the conjugate base stability.
Benzaldehyde's conjugate base has a more stable resonance structure due to the direct attachment of the carbonyl group to the phenyl group, allowing for better delocalization of the negative charge over the entire phenyl ring. In contrast, acetophenone's conjugate base has a less stable resonance structure because the negative charge cannot be delocalized over the entire phenyl ring due to the presence of the methyl group.

In conclusion, benzaldehyde is more acidic than acetophenone because its conjugate base is more stable, allowing for better delocalization of the negative charge over the entire phenyl ring.

Learn more about benzaldehyde

brainly.com/question/31684857

#SPJ11

The Lineweaver-Burk plot is used to:Select one:a. determine the equilibrium constant for an enzymatic reaction.b. illustrate the effect of temperature on an enzymatic reaction.c. solve, graphically, for the rate of an enzymatic reaction at infinite substrate concentration.d. solve, graphically, for the ratio of products to reactants for any starting substrate concentration.e. extrapolate for the value of reaction rate at infinite enzyme concentration.

Answers

The Lineweaver-Burk plot is used to solve, graphically, for the rate of an enzymatic reaction at infinite substrate concentration (option C).

The Lineweaver-Burk plot is a graphical representation of the Michaelis-Menten equation, which describes the relationship between the substrate concentration and the rate of an enzymatic reaction. By plotting the reciprocal of the initial reaction velocity (1/V0) against the reciprocal of the substrate concentration (1/[S]), a straight line can be obtained, from which the maximum reaction velocity (Vmax) and the Michaelis constant (Km) can be determined. From these values, the rate of the reaction at infinite substrate concentration (Vmax) can be calculated. This information is useful for determining the efficiency of an enzyme, as well as for designing experiments to optimize enzymatic reactions.

Learn more about equilibrium constant here:

https://brainly.com/question/10038290

#SPJ11

What is the molar solubility of Ag.PO in water? Ksp (Ag3PO4) = 1.4x10-16 (A) 1.1x10M (B) 4.8x10-SM (C) 5.2x10M (D) 6.8x10'M 1.LR.

Answers

The molar solubility of [tex]Ag_3PO_4[/tex] in water is [tex]4.78*10^{-6} M[/tex], which corresponds to answer (B).

The solubility product expression for silver phosphate ([tex]Ag_3PO_4[/tex]) is:

Ksp = [tex][Ag^+]^3[PO_4^{3-}][/tex]

Let x be the molar solubility of [tex]Ag_3PO_4[/tex] in water, then the equilibrium concentration of silver ions [[tex]Ag^+[/tex]] is also x, and the equilibrium concentration of phosphate ions [[tex]PO_4^{3-}[/tex]] is 3x, because the stoichiometry of the reaction is 1:3.

Substituting these values into the Ksp expression gives:

[tex]Ksp = x^{3(3x)} = 3x^4[/tex]

Solving for x:

[tex]x = (Ksp/3)^{(1/4)} = (1.4*10^{-16/3})^{(1/4)} = 4.78*10^{-6} M[/tex]

For more question on molar solubility click on

https://brainly.com/question/28202068

#SPJ11

which is the best use for a fume hood? f covering volatile compounds g mixing chemicals that release o2 h removing toxic vapors j storing glassware

Answers

The best use for a fume hood is: Removing toxic vapors. The correct option is b.

What is Fume Hood?

A fume hood is a specialized piece of laboratory equipment designed to protect the user and the environment from potentially harmful substances. It achieves this by capturing and removing toxic vapors, gases, and fumes from the air within the hood.

Removing toxic vapors is the primary purpose of a fume hood. It is equipped with an exhaust system that draws air and any hazardous substances away from the user and vents them out of the laboratory, ensuring the air in the workspace remains clean and safe.

Storing glassware (a) does not require the use of a fume hood, as it does not involve the handling or release of toxic substances. Covering volatile compounds (c) may benefit from a fume hood to control and capture any vapors that may be released, but it is not the primary use.

Mixing chemicals that release O₂ (d) does not necessarily require a fume hood unless those chemicals also release toxic vapors or fumes that need to be safely extracted.

In summary, the best use for a fume hood is to remove toxic vapors, safeguarding the health and safety of laboratory personnel and maintaining a controlled working environment. b. is the right option.

To know more about fume hood, refer here:

https://brainly.com/question/29069541#

#SPJ4

Complete question:

Which is the best use for a fume hood?

a. Storing glassware

b. Removing toxic vapors

c. Covering volatile compounds

d. Mixing chemicals that release O₂

What is the correct noble gas electron configuration for Mn2+ (Manganese 2+ cation)?Group of answer choices[Ar] 4s2 3d3[Ar] 4s2 3d5[Ar] 4s2 3d7[Ar] 4s1 3d4[Ar] 4s0 3d5

Answers

The correct noble gas electron configuration for Mn2+ (Manganese 2+ cation) is: [Ar] 4s0 3d5

Let's break down the electron configuration to understand why this is the correct configuration:

[Ar]: This represents the electron configuration of the noble gas Argon (atomic number 18). Noble gases have stable electron configurations and full outer electron shells, making them unreactive.

By including [Ar] at the beginning, we acknowledge that we are starting with the electron configuration of Argon.

3d5: Manganese (Mn) is a transition metal with atomic number 25. In its neutral state, it has an electron configuration of [Ar] 4s2 3d5. However, when it loses two electrons to form the Mn2+ cation, the electron configuration changes.

The two electrons are removed from the 4s orbital since it has a higher energy level compared to the 3d orbital.

By removing the two electrons from the 4s orbital, the electron configuration becomes [Ar] 3d5, which represents the Mn2+ cation.

It's important to note that the electron configuration describes the distribution of electrons in an atom or ion. In the case of Mn2+, it has lost two electrons, resulting in a +2 charge. This configuration reflects the stable electron arrangement of the Mn2+ cation.

To learn more about electron, refer below:

https://brainly.com/question/12001116

#SPJ11

Balance the following equations using the half-reaction method. Identify what is being oxidized and what is being reduced in each reaction: 1) M.O.' + a MAC (acidic solution

Answers

The balanced equation is: M.O.' + a MAC → b M.AC +  [tex]cH_2O[/tex]. M.O.' is being reduced, and a MAC is being oxidized.

What are the balanced coefficients and oxidized/reduced species?

In the given equation, M.O.' and a MAC react in an acidic solution to form b M.AC and [tex]c H_2O[/tex]. To balance the equation, we need to equalize the number of atoms on both sides and ensure that the charges are balanced.

To balance the equation using the half-reaction method, we start by identifying the oxidized and reduced species. The species that loses electrons is oxidized, while the species that gains electrons is reduced. In this case, M.O.' is being reduced because it is gaining electrons, and a MAC is being oxidized as it loses electrons.

Next, we balance the equation by separating the oxidation and reduction half-reactions. We balance the atoms, first considering those involved in the redox process. Then, we balance the charges by adding electrons to the side that needs them.

After balancing the atoms and charges, we can combine the half-reactions to obtain the balanced overall equation. The coefficients a, b, and c in the equation represent the stoichiometric coefficients needed to balance the number of molecules or ions involved in the reaction.

Learn more about half-reaction method

brainly.com/question/30816004

#SPJ11

1. Using your determined value of Ksp, calculate how many milligrams of Ag2CrO4 will dissolve in 10.0 mL of H2O.
Ksp=8.26*10-11.
2. Use your Ksp and show, by calculation, that Ag2CrO4 should precipitate when 5mL of 0.004M AgNO3 are added to 5mL of 0.0024M K2CrO4.
Ksp=8.26*10-11
Please show work on both.

Answers

1. 0.026 mg of [tex]Ag_2CrO_4[/tex] will dissolve in 10 mL of [tex]H_2O[/tex]. 2. [tex]Ag_2CrO_4[/tex] will precipitate when 5 mL of 0.004M [tex]AgNO_3[/tex] are added to 5 mL of 0.0024M [tex]K_2CrO_4[/tex].


1. To determine how many milligrams of [tex]Ag_2CrO_4[/tex] will dissolve in 10.0 mL of [tex]H_2O[/tex],

we can use the Ksp value of 8.26*10-11.

First, we can calculate the molar solubility of [tex]Ag_2CrO_4[/tex], which is the square root of the Ksp value: √(8.26*10-11) = 9.08*10-6 M.

Then, we can convert the molar solubility to milligrams per milliliter (mg/mL) by multiplying it by the molar mass of [tex]Ag_2CrO_4[/tex] (331.74 g/mol) and dividing by 1000: 9.08*10-6 M * 331.74 g/mol / 1000 mL = 0.00301 mg/mL.

Therefore, 0.00301 mg/mL * 10 mL = 0.0301 mg of [tex]Ag_2CrO_4[/tex] will dissolve in 10 mL of [tex]H_2O[/tex].

2. To determine if [tex]Ag_2CrO_4[/tex] will precipitate when 5 mL of 0.004M [tex]AgNO_3[/tex] are added to 5 mL of 0.0024M K2CrO4,

we can use the Ksp value of 8.26*10-11.

First, we need to calculate the ion product (Qsp) using the concentrations of Ag+ and CrO42- ions:

Qsp = [Ag+]2 [CrO42-] = (0.004 M)2 (0.0024 M) = 3.84*10-8.

Comparing Qsp to Ksp, we can see that Qsp is greater than Ksp, which means that [tex]Ag_2CrO_4[/tex] will precipitate.

Therefore, [tex]Ag_2CrO_4[/tex] will form a yellow precipitate when 5 mL of 0.004M [tex]AgNO_3[/tex] are added to 5 mL of 0.0024M [tex]K_2CrO_4[/tex].

For more such questions on dissolve, click on:

https://brainly.com/question/6319922

#SPJ11

Using Ksp, solubility of Ag2CrO4 in 10.0 mL H2O is 2.19 x 10^-5 mg. (8.26 x 10^-11 = [Ag+]^2[CrO4^-2], Ag2CrO4 MW= 331.73 g/mol)

Qsp = [Ag+]^2 [CrO4^-2] = 1.67 x 10^-12, Qsp < Ksp, Ag2CrO4 precipitates. (Ksp = 8.26 x 10^-11, AgNO3 + K2CrO4 -> Ag2CrO4↓+ 2KNO3)a

To calculate how many milligrams of Ag2CrO4 will dissolve in 10.0 mL of H2O, we first need to find the molar solubility (S) of the compound. Using the Ksp value of 8.26x10^-11, we can write the expression for the equilibrium constant and solve for S. S = sqrt(Ksp), which gives us S = 9.09x10^-6 M. We can then use the molar mass of Ag2CrO4 (331.74 g/mol) to convert the molar solubility to milligrams of Ag2CrO4 per 10.0 mL of water, giving us 3.01 mg of Ag2CrO4. To show that Ag2CrO4 should precipitate when 5 mL of 0.004 M AgNO3 is added to 5 mL of 0.0024 M K2CrO4, we need to calculate the ion product (IP) and compare it to the Ksp. IP = [Ag+][CrO42-] = (0.004 M)(0.0024 M) = 9.6x10^-6, which is greater than the Ksp value of 8.26x10^-11. Since IP > Ksp, the solution is supersaturated and Ag2CrO4 should precipitate.

Learn more about Ag2CrO4 here:

https://brainly.com/question/14789299

#SPJ11

If 36. 0 g of NaOH (MM = 40. 00 g/mol) are added to a 500. 0 mL volumetric flask, and water is added to fill the flask, what is the concentration of NaOH in the resulting solution?

Answers

To determine the concentration of NaOH in the resulting solution, we need to calculate the number of moles of NaOH and then divide it by the volume of the solution. The given mass of NaOH and the volume of the flask can be used to find the concentration.

The concentration of a solution is defined as the amount of solute (in moles) divided by the volume of the solution (in liters). In this case, we are given the mass of NaOH as 36.0 g and the volume of the volumetric flask as 500.0 mL (which can be converted to liters by dividing by 1000).

To find the number of moles of NaOH, we divide the given mass by the molar mass of NaOH. The molar mass of NaOH is 40.00 g/mol. By dividing 36.0 g by 40.00 g/mol, we can determine the number of moles of NaOH.

Once we have the number of moles of NaOH, we divide it by the volume of the solution (500.0 mL or 0.500 L) to obtain the concentration in moles per liter (M).

Learn more about molar mass here:

https://brainly.com/question/31545539

#SPJ11

A chemist mixes 66. g of water with 39. g of acetic acid and 5.1 g of butanoic acid. Calculate the percent by mass of each component of this solution. Round each of your answers to 2 significant digits. component mass percent water 0 % х Х 5 ? acetic acid % butanoic acid A chemist prepares a solution of zinc oxalate (ZC,0) by weighing out 1.79 kg of zinc oxalate into a 100 ml. volumetric flask and filling the Mask to the mark with water Calculate the concentration in g/dl of the chemist's inc oxidate solution. Round your answer to 3 significant digits.

Answers

Answer:  the percent by mass of water, acetic acid, and butanoic acid in the solution are approximately 59.95%, 35.41%, and 4.63%, respectively.

Explanation:

To calculate the percent by mass of each component in the solution, we first need to find the total mass of the solution:

Total mass = mass of water + mass of acetic acid + mass of butanoic acid

Total mass = 66 g + 39 g + 5.1 g

Total mass = 110.1 g

Now we can calculate the percent by mass of each component:

Percent by mass of water = (mass of water / total mass) x 100%

Percent by mass of water = (66 g / 110.1 g) x 100%

Percent by mass of water = 59.95% (rounded to 2 significant digits)

Percent by mass of acetic acid = (mass of acetic acid / total mass) x 100%

Percent by mass of acetic acid = (39 g / 110.1 g) x 100%

Percent by mass of acetic acid = 35.41% (rounded to 2 significant digits)

Percent by mass of butanoic acid = (mass of butanoic acid / total mass) x 100%

Percent by mass of butanoic acid = (5.1 g / 110.1 g) x 100%

Percent by mass of butanoic acid = 4.63% (rounded to 2 significant digits)

Therefore, the percent by mass of water, acetic acid, and butanoic acid in the solution are approximately 59.95%, 35.41%, and 4.63%, respectively.

An exothermic reaction causes the surroundings to A) warm up B) become acidic C) condense D) decrease in temperature E) release CO2

Answers

An exothermic reaction causes the surroundings to A) warm up.

An exothermic reaction causes the surroundings to warm up. In an exothermic reaction, energy is released from the system to the surroundings in the form of heat, this transfer of energy resulting in an increase in temperature. The system is the chemical reaction that is taking place, while the surroundings are everything outside of the system that can be affected by the reaction.

Therefore, the answer to the question is A) warm up.

Learn more about exothermic reaction : https://brainly.com/question/2924714

#SPJ11

(NH4)2CrO4(aq) mixed with BaCI2(aq)

Write a chemical equation describing the formation of the precipitate, overall equation, and complete ionic equation, and net ionic equation. Identify spectator ions

Answers

The chemical equation for the reaction between (NH4)2CrO4(aq) and BaCl2(aq) can be written as follows (NH4)2CrO4(aq) + BaCl2(aq) → BaCrO4(s) + 2 NH4Cl(aq).

This equation represents a double displacement reaction, where the ammonium chromate (NH4)2CrO4 reacts with barium chloride (BaCl2) to form barium chromate (BaCrO4) as a precipitate, and ammonium chloride (NH4Cl) remains in the solution.

The complete ionic equation breaks down all the soluble ionic compounds into their constituent ions:

2 NH4+(aq) + CrO42-(aq) + Ba2+(aq) + 2 Cl-(aq) → BaCrO4(s) + 2 NH4+(aq) + 2 Cl-(aq)

In the net ionic equation, spectator ions are removed as they do not participate in the actual chemical reaction:

CrO42-(aq) + Ba2+(aq) → BaCrO4(s)

In this net ionic equation, the spectator ions are NH4+ and Cl-. They appear on both sides of the equation and do not undergo any change during the reaction. They are present in the solution but do not contribute to the formation of the precipitate. The formation of the yellow precipitate of barium chromate (BaCrO4) indicates the completion of the reaction.

Learn more about chemical equation here

https://brainly.com/question/28792948

#SPJ11

using any data you can find in the aleks data resource, calculate the equilibrium constant K at 25° C for the following reaction. N2 + O2 ---> 2NO
Round your answer to 2 signiicant digits.

Answers

The equilibrium constant (K) for the given reaction, N2 + O2 ⇌ 2NO, at 25°C.



To calculate the equilibrium constant, K, you need to know the concentrations (or partial pressures) of the reactants and products at equilibrium. The equilibrium constant expression for the reaction is written as:

K = [NO]^2 / ([N2] * [O2])

To determine the equilibrium constant, you would need experimental data, such as the concentrations or partial pressures of N2, O2, and NO at equilibrium. Once you have these values, substitute them into the equilibrium constant expression and calculate the value of K.

The equilibrium constant, K, is a dimensionless quantity that represents the ratio of the concentrations of products to reactants at equilibrium. It provides insight into the extent of the reaction and the relative concentrations of reactants and products in the equilibrium mixture.

To learn more about equilibrium:

https://brainly.com/question/30694482

#SPJ11

Suppose you burn a 2. 5 g sample of potato chips. You use the heat given off from that process to heat 34. 3 g of water from 16. 1 oC to 20. 1 oC. What is the caloric value (in kcal/g) of the potato chips?

Answers

Three significant figures, the caloric value of the potato chips is approximately 54.9 kcal/g.

To determine the caloric value of the potato chips, we need to calculate the amount of heat transferred from the burning process to the water. The formula to calculate heat transfer is:

q = m * c * ΔT

where:

q is the heat transferred,

m is the mass of the water,

c is the specific heat capacity of water,

ΔT is the change in temperature.

Given:

m (mass of water) = 34.3 g

c (specific heat capacity of water) = 1 cal/g°C

ΔT (change in temperature) = 20.1°C - 16.1°C = 4°C

Substituting these values into the formula, we have:

q = 34.3 g * 1 cal/g°C * 4°C = 137.2 cal

Since 1 kcal = 1000 cal, the caloric value of the potato chips can be calculated as:

Caloric value = q (heat transferred) / mass of potato chips

Assuming complete combustion, the heat transferred is equal to the caloric value of the potato chips. Therefore:

Caloric value = 137.2 cal / 2.5 g = 54.88 kcal/g

Rounding to three significant figures, the caloric value of the potato chips is approximately 54.9 kcal/g.

To learn more about  calorie click here:

brainly.com/question/31446016

#SPJ11

the half - life of californium - 252 is 2.6 years. how many milligrams of californium - 252 from an original sample of 1.0 mg will remain after 3.0 years?

Answers

After 3.0 years, 0.376 mg of californium-252 will remain from the original sample of 1.0 mg.

The half-life of californium-252 is 2.6 years, which means that after 2.6 years, half of the original sample will have decayed. We can use this information to calculate the amount of californium-252 that will remain after 3.0 years.First, we need to determine how many half-lives have passed.

We can do this by dividing the elapsed time (3.0 years) by the half-life (2.6 years):3.0 years / 2.6 years per half-life = 1.15 half-livesThis means that 1.15 half-lives have passed since the original sample was taken.To calculate the amount of californium-252 that remains, we can use the following formula:

To know more about californium visit:

https://brainly.com/question/2689589

#SPJ11

Consider a large number of hydrogen atoms, with electrons all initially in the n = 4 state.
(a) How many different wavelengths would be observed in the emission spectrum of these atoms?

Answers

The number of different wavelengths observed in the emission spectrum of hydrogen atoms with electrons initially in the n = 4 state would be infinite.

a). What is the range of possible wavelengths in the emission spectrum of hydrogen atoms with electrons in the n = 4 state?

When hydrogen atoms undergo transitions from higher energy levels to the n = 4 state, they can emit photons of various energies and wavelengths. The n = 4 state represents a range of possible energy levels within which electrons can transition.

Since there are an infinite number of energy levels within this range, the emitted photons can have an infinite number of different wavelengths in the emission spectrum.

The emission spectrum of hydrogen is characterized by discrete lines representing the transitions between energy levels. Each transition corresponds to a specific energy difference and, consequently, a unique wavelength of light.

In the case of hydrogen atoms with electrons initially in the n = 4 state, there are multiple possible transitions to lower energy levels, resulting in a continuous range of wavelengths and an infinite number of different wavelengths observed in the emission spectrum.

Learn more about hydrogen atoms

brainly.com/question/30886690

#SPJ11

how effective was the steam distillation? what data do you have to support this?

Answers

Steam distillation is a highly effective method for extracting essential oils and other volatile compounds from plant materials. The effectiveness of steam distillation is supported by a large body of scientific research, which has demonstrated the efficiency of this process in extracting high-quality essential oils from a wide range of plant materials.

One key factor that contributes to the effectiveness of steam distillation is the use of high-pressure steam, which helps to release the essential oils from the plant material.

In addition, the use of water as a solvent helps to protect the delicate chemical compounds found in essential oils, preserving their quality and aroma.

Numerous studies have demonstrated the effectiveness of steam distillation in extracting essential oils from plants, including lavender, peppermint, and eucalyptus.

These studies have shown that steam distillation is capable of extracting a high yield of essential oils with excellent purity and quality, making it an ideal method for the production of essential oils and other natural plant extracts.

Read more about Steam distillation at https://brainly.com/question/29400171

#SPJ11

What set of the compounds below will form a near neutral aqueous solution (neither acidic nor basic) when individually dissolved in water Bao HC2H302 HF SO3 NH3 A NH3 only B. HC2H302 only CHC2H302 and NH3 D.HC2H302, SO3 and NH3 E. Bao. HC2H302, and NH3 F. None of these

Answers

The set of compounds that will form a near neutral aqueous solution when individually dissolved in water is D. HC2H302, SO3, and NH3.

Which compounds create a near neutral aqueous solution?

When a compound dissolves in water, it can either release or accept protons, resulting in an acidic or basic solution. Compounds that release protons, such as acids, make the solution acidic, while compounds that accept protons, such as bases, make the solution basic.

To form a near neutral aqueous solution, we need compounds that neither release nor accept protons significantly.

Among the given options, HC2H302 (acetic acid) is a weak acid that releases a small number of protons. SO3 (sulfur trioxide) is a highly reactive compound that can react with water to form sulfuric acid (a strong acid), making the solution acidic.

Bao (barium oxide) is a strong base that readily accepts protons, making the solution basic.

However, NH3 (ammonia) is a weak base that accepts protons to a limited extent, resulting in a slightly basic solution. Therefore, the combination of HC2H302, SO3, and NH3 is the only set of compounds that can form a near neutral aqueous solution when individually dissolved in water.

Learn more about Compounds

brainly.com/question/14117795

#SPJ11

An element ‘X’ has atomic number 34. Give its position in the


periodic table

Answers

Element X with atomic number 34 is selenium (Se). In the periodic table, selenium is located in period 4 and group 16. Its position is below oxygen (O) and sulfur (S) and above tellurium (Te) and polonium (Po). Selenium belongs to the chalcogen group and is a nonmetal. It has six valence electrons in its outermost energy level.

The periodic table is organized based on the atomic number of elements, which represents the number of protons in the nucleus of an atom. Element X with atomic number 34 corresponds to selenium (Se). To find its position in the periodic table, we can locate the element with atomic number 34.

Moving from left to right in period 4, we find selenium in group 16, also known as the oxygen group or the chalcogen group. It is positioned between oxygen (atomic number 8) and sulfur (atomic number 16). The element below selenium in the same group is tellurium (atomic number 52), and the element above is polonium (atomic number 84). Therefore, the element X with atomic number 34 is selenium, and its position in the periodic table is in period 4 and group 16.

LEARN MORE ABOUT selenium here: brainly.com/question/2396770

#SPJ11

calculate ecell at 25°c when [ag (aq)] = 2.9 m and [al3 (aq)] = 0.041 m. calculate δgo, the standard free energy change for this reaction.

Answers

The standard free energy change for this reaction is -144.47 kJ/mol, which indicates that the reaction is spontaneous (since ΔG° is negative).

The reaction's balanced chemical equation is:

[tex]2Al(s) + 3Ag+(aq) → 3Ag(s) + 2Al3+(aq)[/tex]

The Nernst equation can be used to compute the cell potential (Ecell):

[tex]Ecell = E°cell - (RT/nF) * ln(Q)[/tex]

where E°cell is the standard cell potential, R is the gas constant (8.314 J/K·mol), T is the temperature in Kelvin (25°C = 298 K), n is the number of moles of electrons transferred

The standard electrode potentials are listed in tables, and for this reaction, we have:

Ag+(aq) + e- → Ag(s) E°red = 0.80 V (cathode)

Al3+(aq) + 3e- → Al(s) E°red = -1.67 V (anode)

Therefore, the standard cell potential is:

E°cell = E°red(cathode) - E°red(anode)

E°cell = 0.80 V - (-1.67 V)

E°cell = 2.47 V

Substituting these values into the Nernst equation, we get:

Ecell = E°cell - (RT/nF) * ln(Q)

Ecell = 2.47 V - (8.314 J/K·mol * 298 K / (6 * 96,485 C/mol)) * ln(1.58 x 10^6)

Ecell = 2.47 V - 0.050 V

Ecell = 2.42 V

Therefore, the cell potential at 25°C is 2.42 V.

The standard free energy change (ΔG°) for the reaction can be calculated using the equation:

ΔG° = -nF E°cell

Substituting the values of n, F, and E°cell into this equation, we get:

ΔG° = -6 * 96,485 C/mol * 2.47 V

ΔG° = -144.47 kJ/mol

For such more question on reaction:

https://brainly.com/question/11231920

#SPJ11

The cell potential for the given reaction is 1.10 V at 25°C, and the standard free energy change is -317.6 kJ/mol. The balanced equation is [tex]3 Ag⁺(aq) + Al(s) → 3 Ag(s) + Al³⁺(aq)[/tex].

The balanced equation for the given reaction is:

[tex]3 Ag⁺(aq) + Al(s) → 3 Ag(s) + Al³⁺(aq)[/tex]

The standard reduction potential for [tex]Ag⁺/Ag is +0.80 V and for Al³⁺/Al[/tex] is -1.66 V. The cell potential can be calculated using the Nernst equation:

[tex]Ecell = E°cell - (0.0592 V/n) log Q[/tex]

where E°cell is the standard cell potential, n is the number of moles of electrons transferred, and Q is the reaction quotient.

At 25°C, the Nernst equation becomes:

[tex]Ecell = E°cell - (0.0592 V/3) log ( [Ag⁺]³ / [Al³⁺] )[/tex]

[tex]Ecell = (+0.80 V) - (0.0197 V) log ( 2.9³ / 0.041 )[/tex]

Ecell = 1.10 V

The standard free energy change can be calculated using the formula:

[tex]ΔG° = -nFE°cell[/tex]

where F is the Faraday constant (96,485 C/mol), n is the number of moles of electrons transferred, and E°cell is the standard cell potential.

In this case, n = 3, so:

[tex]ΔG° = -(3 mol e⁻) × (96,485 C/mol) × (+1.10 V)[/tex]

ΔG° = -317,595 J/mol

ΔG° = -317.6 kJ/mol

Therefore, the cell potential at 25°C is 1.10 V, and the standard free energy change for the reaction is -317.6 kJ/mol.

learn more about cell potential here:

https://brainly.com/question/1313684

#SPJ11

a weak base has _______. select the correct answer below: 1. a large percent ionization 2. a low percent ionization 3. a low percent ionization and a small K_b 4. a small K_b and a large percent ionization

Answers

A weak base has a low percent ionization and a small K_b.

This means that only a small fraction of the weak base molecules dissociate into ions when placed in water. The equilibrium constant for the reaction between the weak base and water (K_b) is also small. This is because weak bases have a weaker attraction for protons than strong bases, and therefore have a harder time accepting them from water molecules to form ions.

The low percent ionization and small K_b result in a weaker basicity for the weak base. In contrast, a strong base has a high percent ionization and a large K_b, meaning that it dissociates readily into ions and has a stronger affinity for protons. Understanding the properties of weak and strong bases is important in predicting and controlling chemical reactions.

Learn more about chemical reactions here: https://brainly.com/question/25769000

#SPJ11

the normal concentration range for cl−cl− ion is 95-105 meq/lmeq/l of blood plasma. so, a concentration of 150 meq/lmeq/l is

Answers

A normal concentration range for chloride (Cl⁻) ion in blood plasma is 95-105 meq/L. Therefore, a concentration of 150 meq/L is significantly higher than the normal range and may indicate a medical condition requiring further investigation.

A concentration of 150 meq/lmeq/l for the Cl- ion is higher than the normal range of 95-105 meq/lmeq/l in blood plasma. This can indicate various health conditions such as dehydration, kidney disease, or acid-base imbalances. It is important to consult a healthcare provider to identify the underlying cause and receive appropriate treatment. In some cases, medications or dietary adjustments may be necessary to regulate Cl- ion levels and maintain overall health.

To know more about concentration click here:

https://brainly.com/question/10725862

#SPJ11

Other Questions
________ films often include innovative technology, unexpected subject matter, and/or manipulated images. If the sum of the interior angle of a polygon is 1800 how many sides does it have Each of the following, except one, is a condition that characterizes a perfectly competitive labor market. Which is the exception Berkshire hathaways sharpe ratio is ________ than the aggregate stock market for the sample period? (please use the std sharpe ratios) What happened to jobs for women after the end of World War I Under which type of listing will an agent receive a commission only if he is the procuring cause of the sale? A(n) ______ cell contains two sets of chromosomes, one set of chromosomes inherited from each parent. The conquistadors were driven primarily by? m(t)=120e0.018tHow much mass remains after 50 years? Round to 2 decimal places. Cholera toxin locks the Gs subunit into an active state, in that GTP is bound and cannot be hydrolyzed back to GDP to turn off the subunit. What effect will cholera toxin have in the cell How did Hawaii become a U.S. territory without any bloodshed There can be infringement of patents, copyrights, trademarks, trade names and trade dress. True False Drag the labels to the appropriate locations on this diagram. Use labels of Group 1 to identify the structures involved in plant terrestrial adaptations. Then identify the function of each structure on the target below it. Some targets have already been filled in. Find AC please help trig is so hard 1. A committee of 3 men and 4 women is to be formed from 5 men and 6 women. If a particular woman is not to be included, how many different committees are possible The mayor and city council have a secret meeting to pass a law requiring citizens to pay a special tax for new sewer lines. Which characteristic of rule of law was violated in this situation? The vectors are linearly independent if and only if? When rolling a single number cube, what are the odds, in simplest form, in favor of rolling a 4 or a 5? A. 1:1 B. 1:2 C. 1:3 D. 1:5 A new Concept XI bicycle cost a bike shop $800. The shop set the original list price of the bicycle at a price greater than $800. During the shops 30th anniversary sale, every list price in the store was marked down 30%. The shop sold this bicycle during its anniversary sale. Given that the shop made a 40% profit on the sale of this bicycle, what was the bicycles original list price? The program is a program that primarily provides medical benefits for women and children living in poverty, while is a program to provide medical benefits for the elderly.