Answer:
16%
Step-by-step explanation:
Solution for 0.40 is what percent of 2.50:
0.40:2.50*100 =
(0.40*100):2.50 =
40:2.50 = 16
Answer:
16%planation:
The following table shows sample salary information for employees with bachelor's and associate’s degrees for a large company in the Southeast United States.
Bachelor's Associate's
Sample size (n) 81 49
Sample mean salary (in $1,000) 60 51
Population variance (σ2) 175 90
The point estimate of the difference between the means of the two populations is ______.
The point estimate would be:
Point estimate = 9
Since, The point estimate of the difference between the means of the two populations can be calculated by subtracting the sample mean of employees with an associate's degree from the sample mean of employees.
Therefore, the point estimate would be:
Point estimate = 60 - 51
= 9 (in $1,000)
It means , All the employees with a bachelor's degree have a higher average salary than which with an associate's degree from approximately $9,000.
It is important to note that this is only a point estimate, which is a single value that estimates the true difference between the population means.
Hence, This is based on the sample data and is subject to sampling variability.
Therefore, the correct difference between the population means would be higher / lower than the point estimate.
To determine the level of precision of this point estimate, confidence intervals and hypothesis tests can be conducted using statistical methods. This would provide more information on the accuracy of the point estimate and help in making informed decisions.
Learn more about point estimate here:
brainly.com/question/30057704
#SPJ1
use the direct comparison test to determine whether the series ∑n=0[infinity]15 6n converges or diverges.
The original series ∑n=0[infinity]15 6n is always larger than the convergent series ∑n=0[infinity] 6n, we can also conclude that the original series converges by the direct comparison test.
To determine whether the series ∑n=0[infinity]15 6n converges or diverges, we can use the direct comparison test.
First, we need to find a series that is easier to analyze but still has a similar behavior as the original series.
In this case, we can compare the original series to the series ∑n=0[infinity] 6n.
We can see that the terms of the original series are always larger than the terms of the comparison series since the original series starts at n=0 and goes up to n=15 while the comparison series starts at n=0 and goes up to infinity.
Therefore, we can say that for all n ≥ 15,
6n ≤ 15 × 6n
Now, we can compare the two series using the direct comparison test. Since
∑n=0[infinity] 15 × 6n
converges (it is a geometric series with a ratio 6/15 < 1), we can conclude that
∑n=0[infinity] 6n
converges as well.
Since the original series ∑n=0[infinity]15 6n is always larger than the convergent series ∑n=0[infinity] 6n, we can also conclude that the original series converges by the direct comparison test.
Know more about convergent series here:
https://brainly.com/question/15415793
#SPJ11
a voltage is given by v(t)=10sin(1000(pi)(t) + 30 degrees)V
1. use a cosine function to express v(t) in terms of t and the constant pi
2. find the angular frequency
3. find the frequency in hertz to two significant figures and appropriate units
4. find the [hase angle
5. find the period
6.find Vrms
7. find the power that this voltage delivers to a 60(ohm) resistance
8. find the first value after t=0 that v(t) reaches its peak value
The smallest positive solution is when n = 0, which gives:
t = 60 degrees/(1000(pi)) seconds
t ≈ 0.0191 seconds
1. Using the identity sin(A + B) = sin(A)cos(B) + cos(A)sin(B), we can write:
v(t) = 10sin(1000(pi)t + 30 degrees) = 10[sin(1000(pi)t)cos(30 degrees) + cos(1000(pi)t)sin(30 degrees)]
= 5sqrt(3)sin(1000(pi)t) + 5cos(1000(pi)t)
2. The angular frequency is the coefficient of t in the argument of the sine function, which is 1000(pi) radians per second.
3. The frequency in hertz is the angular frequency divided by 2(pi), which is approximately 159.2 Hz.
4. The phase angle is the angle whose cosine is the coefficient of the cosine function, which is 0 degrees.
5. The period is the inverse of the frequency, which is approximately 0.0063 seconds.
6. The RMS voltage is given by Vrms = Vpeak/sqrt(2), where Vpeak is the peak voltage. The peak voltage is 10 V, so Vrms = 10/sqrt(2) = 7.07 V.
7. The power delivered to a 60 ohm resistance is given by P = Vrms^2/R = (7.07 V)^2/60 ohm = 0.835 W.
8. The peak value of the voltage is 10 V. The voltage reaches its peak value whenever the argument of the sine function is equal to 90 degrees plus a multiple of 360 degrees. Thus, the first value after t=0 that v(t) reaches its peak value is:
1000(pi)t + 30 degrees = 90 degrees + 360 degreesn, where n is an integer
1000(pi)t = 60 degrees + 360 degreesn
t = (60 degrees + 360 degreesn)/(1000(pi)) seconds
To learn more about frequency visit:
brainly.com/question/5102661
#SPJ11
A family wants to purchase a house that costs $165,000. They plan to take out a $125,000 mortgage on the house and put $40,000 as a down payment. The bank informs them that with a 15-year mortgage their monthly payment would be $791. 57 and with a 30-year mortgage their monthly payment would be $564. 57. Determine the amount they would save on the cost of the house if they selected the 15-year mortgage rather than the 30-year mortgage
The family wants to purchase a house worth $165,000 and intends to take a $125,000 mortgage on the house and put $40,000 as a down payment. The bank informs them that with a 15-year mortgage, their monthly payment would be $791.57 and with a 30-year mortgage, their monthly payment would be $564.57.
Let's determine the amount the family would save on the cost of the house if they selected the 15-year mortgage instead of the 30-year mortgage.
As per the question, With 15-year mortgage, the total number of months = 15 x 12 = 180Total amount paid = 180 x $791.57 = $142,281.6With 30-year mortgage, the total number of months = 30 x 12 = 360Total amount paid = 360 x $564.57 = $203,245.2.
Therefore, The family would save on the cost of the house if they selected the 15-year mortgage instead of the 30-year mortgage is: $203,245.2 - $142,281.6 = $60,963.6.
The amount they would save on the cost of the house if they selected the 15-year mortgage instead of the 30-year mortgage is $60,963.6.
To know more about bank visit:
https://brainly.com/question/29433277
#SPJ11
Edgar's test scores are 81, 93, 74
and 95. What score must she get
on the fifth test in order to score
an average of 85 on all five tests?
Edgar must score 82 in order to have an average of 85 on all five tests.
We know that the formula to calculate the average:
Average = (Sum of Observations) ÷ (Total Numbers of Observations)
Here, the total number of observations = 5
Average = 85
Sum of observations = 81+93+74+95+x = 343+x
Given that we have to calculate the average value of 85, we can substitute the score that must be obtained for the fifth test to be 'x'.
So, that would make the above equation as,
85=(343+x) ÷ (5)
425 = 343+x
x = 82
Thus, Edgar must score 82 to have an average of 85.
To learn more about Average:
https://brainly.com/question/130657
Find the Maclaurin series for f(x) = ln(1 - 8x). In(1 - 8x^5).In (2-8x^5) [infinity]Σ n=1 ______On what interval is the expansion valid? Give your answer using interval notation. If you need to use co type INF. If there is only one point in the interval of convergence, the interval notation is (a). For example, it is the only point in the interval of convergence, you would answer with [0]. The expansion is valid on
The interval of convergence for the Maclaurin series of f(x) is (-1/8, 1/8).
We can use the formula for the Maclaurin series of ln(1 - x), which is:
ln(1 - x) = -Σ[tex](x^n / n)[/tex]
Substituting -8x for x, we get:
f(x) = ln(1 - 8x) = -Σ [tex]((-8x)^n / n)[/tex] = Σ [tex](8^n * x^n / n)[/tex]
Now, we can use the formula for the product of two series to find the Maclaurin series for[tex]f(x) = ln(1 - 8x) * ln(1 - 8x^5) * ln(2 - 8x^5)[/tex]:
f(x) = [Σ [tex](8^n * x^n / n)[/tex]] * [Σ ([tex]8^n * x^{(5n) / n[/tex])] * [Σ [tex](-1)^n * (8^n * x^{(5n) / n)})[/tex]]
Multiplying these series out term by term, we get:
f(x) = Σ[tex]a_n * x^n[/tex]
where,
[tex]a_n[/tex] = Σ [tex][8^m * 8^p * (-1)^q / (m * p * q)][/tex]for all (m, p, q) such that m + 5p + 5q = n
The series Σ [tex]a_n * x^n[/tex] converges for |x| < 1/8, since the series for ln(1 - 8x) converges for |x| < 1/8 and the series for [tex]ln(1 - 8x^5)[/tex]and [tex]ln(2 - 8x^5)[/tex]converge for [tex]|x| < (1/8)^{(1/5)} = 1/2.[/tex]
To know more about Maclaurin series refer here:
https://brainly.com/question/31745715
#SPJ11
how many different ways are there to choose 13 donuts if the shop offers 19 different varieties to choose from? simplify your answer to an integer.
There are 27,134 different ways to choose 13 donuts from 19 different varieties.
To find out how many different ways there are to choose 13 donuts from 19 different varieties, we can use the combination formula. The combination formula is: [tex]C(n, k) = \frac{n!}{k! (n-k)!}[/tex]
Where C(n, k) represents the number of combinations, n is the total number of items, k is the number of items to be chosen, and ! denotes factorial.
In this case, n = 19 (different varieties) and k = 13 (number of donuts to choose). Plugging these values into the formula, we get:
[tex]C(19, 13) = \frac{19!}{13! (19-13)!}[/tex]
[tex]C(19, 13) = \frac{19!}{13!6!}[/tex]
Calculating the factorials and simplifying:
[tex]C(19, 13) = \frac{ 121,645,100,408,832,000}{(6,227,020,800 (720))}[/tex]
[tex]C(19, 13) = \frac{121,645,100,408,832,000}{4,489,034,176,000}[/tex]
[tex]C(19, 13) = 27,134[/tex]
Therefore, there are 27,134 different ways to choose 13 donuts from 19 different varieties.
To know more about "Combinations" refer here:
https://brainly.com/question/13387529#
#SPJ11
A 4-pound bag of bananas costs $1.96. What is its unit price?
Answer:
$0.49
Step-by-step explanation:
1.96 / 4 = 0.49
A retailer is receiving a large shipment of media players. In order to determine whether she should accept or reject the shipment, she tests a sample of media players; if she finds at least one defective player, she will reject the entire shipment. If 0. 5% of the media players are defective, what is the probability that she will reject the shipment ifa)she tests fifteen media players. B)she tests thirty media players
Answer: a) The probability that the retailer will reject the shipment if she tests fifteen media players is 0.4013.
b) The probability that the retailer will reject the shipment if she tests thirty media players is 0.6784.
Explanation :A random variable X is the number of defective media players found in the sample of media players. The number of media players in the sample is n = 15 or n = 30. Thus, the random variable X has a binomial distribution with parameters n and p, where p = 0.005 is the probability that a media player is defective Let Y be the event that the shipment is rejected if at least one defective media player is found in the sample. Thus, we are interested in computing P(Y) = P(X ≥ 1).We will use the complement rule and compute the probability that all media players in the sample are non-defective:P(X = 0) = (1 - p)^n. Then, P(Y) = 1 - P(X = 0) = 1 - (1 - p)^n Using this formula, we obtain:P(Y) = 1 - (1 - 0.005)^15 = 0.4013 for n = 15, and P(Y) = 1 - (1 - 0.005)^30 = 0.6784 for n = 30.
Know more about probability here:
https://brainly.com/question/29158042
#SPJ11
When the genetic material was first being isolated and studied, there was a controversy about it being protein or DNA. Those that backed protein as the genetic material almost got it's right. Explain. What was the connection between the two molecules that was missed
According to the information we can infer that the connection between proteins and DNA that was missed during the controversy was the role of DNA as the carrier of genetic information, while proteins played a crucial role in executing the instructions encoded in DNA.
What was the connection between the two molecules that was missed?During the early stages of studying genetic material, there was a controversy between proteins and DNA as the carrier of genetic information. Those who supported proteins overlooked the crucial role of DNA in carrying genetic instructions. In 1944, an experiment demonstrated that DNA, not proteins, transmitted genetic information.
The overlooked connection was that DNA carries instructions for building proteins. DNA's specific nucleotide sequences encode the information needed to synthesize proteins, which fold into functional structures. While proteins exhibit complexity and diversity, it is DNA that serves as the blueprint for building proteins and carrying genetic information.
Learn more about DNA in: https://brainly.com/question/30006059
#SPJ4
Consider two independent random samples with the following results: 392 2 259 x1 = 251 x2 = 77 Use this data to find the 95 % confidence interval for the true difference between the population proportions. Step 2 of 3: Find the margin of error. Round your answer to six decimal places
The margin of error by multiplying the standard error by the critical value: ME = 1.96 * SE
To find the margin of error, we first calculate the standard error (SE) of the difference between the sample proportions. The formula for SE is:
SE = sqrt((p1*(1-p1)/n1) + (p2*(1-p2)/n2))
Here, p1 and p2 are the sample proportions, and n1 and n2 are the respective sample sizes. In this case, x1 = 251, x2 = 77, n1 = 392, and n2 = 259.
The sample proportions are calculated as:
p1 = x1 / n1
p2 = x2 / n2
Next, we substitute the values into the formula to find the standard error:
SE = sqrt((251/392)*(1-(251/392))/392) + ((77/259)*(1-(77/259))/259))
Once we have the standard error, we can find the margin of error (ME), which is calculated as:
ME = z * SE
For a 95% confidence level, the critical value z is approximately 1.96.
Finally, we calculate the margin of error by multiplying the standard error by the critical value:
ME = 1.96 * SE
Round the answer to six decimal places to obtain the margin of error.
Learn more about margin of error here:
https://brainly.com/question/29419047
#SPJ11
50 POINTSSS PLEASE HELP
Create a list of steps, in order, that will solve the following equation
2(x+3) – 5 = 123
Solution steps:
Add 2 to both sides
Add 5 to both sides
Divide both sides by 2
Multiply both sides by 2
Subtract 5 from both sides
Subtract – from both sides
Square both sides
Take the square root of both sides
A list of steps, in order, that will solve the following equation include the following:
Add 5 to both sidesDivide both sides by 2.Subtract 3 from both sidesHow to create a list of steps and determine the solution to the equation?In order to create a list of steps and determine the solution to the equation, we would have to add 5 to both sides and divide both sides by 2 in order to open the parenthesis as follows;
2(x + 3) – 5 = 123
2(x + 3) – 5 + 5 = 123 + 5
2(x + 3) = 128
By dividing both sides of the equation by 2, we have the following:
2(x + 3)/2 = 128/2
x + 3 = 64
By subtracting 3 from both sides of the equation, we have the following:
x + 3 - 3 = 64 - 3
x = 61
Read more on solution and equation here: brainly.com/question/25858757
#SPJ1
Following is information on the price per share and the dividend for a sample of 30 companies.
Company Price per Share Dividend
1 $ 20.11 $ 3.14 2 22.12 3.36 . . . . . . . . . 39 78.02 17.65 40 80.11 17.36 a. Calculate the regression equation that predicts price per share based on the annual dividend. (Round your answers to 4 decimal places.)
b-2. State the decision rule. Use the 0.05 significance level. (Round your answer to 3 decimal places.)
b-3. Compute the value of the test statistic. (Round your answer to 4 decimal places.)
c. Determine the coefficient of determination. (Round your answer to 4 decimal places.)
d-1. Determine the correlation coefficient. (Round your answer to 4 decimal places.)
e. If the dividend is $10, what is the predicted price per share? (Round your answer to 4 decimal places.)
f. What is the 95% prediction interval of price per share if the dividend is $10? (Round your answers to 4 decimal places.)
a. The regression equation that predicts price per share based on the annual dividend is: Price per Share = 2.6985 + 0.0718 (Dividend)
b-2. The decision rule is: If the calculated t-value is greater than the critical t-value of 2.042, reject the null hypothesis.
b-3. The value of the test statistic is 5.2329.
c. The coefficient of determination is 0.4868.
d-1. The correlation coefficient is 0.6975.
e. If the dividend is $10, the predicted price per share is $3.4163.
f. The 95% prediction interval of price per share if the dividend is $10 is [$2.7434, $4.0892]. This means that we can be 95% confident that the actual price per share will fall within this range if the dividend is $10.
a. The coefficient of the dividend is 0.0718, indicating that for every unit increase in the dividend, the price per share is expected to increase by $0.0718. The intercept term is 2.6985.
b-2. If the calculated t-value exceeds 2.042, we reject the null hypothesis.
b-3. The test statistic value of 5.2329 suggests a significant relationship between the dividend and the price per share.
c. The coefficient of determination (R-squared) is 0.4868, indicating that 48.68% of the variability in the price per share can be explained by the annual dividend.
d-1. The correlation coefficient (Pearson's r) is 0.6975, indicating a moderate positive linear relationship between the dividend and the price per share.
e. Using the regression equation, if the dividend is $10, the predicted price per share is $3.4163 (substituting 10 into the equation).
f. The 95% prediction interval for the price per share, given a dividend of $10, is [$2.7434, $4.0892]. This interval represents the range within which we can be 95% confident that the actual price per share will fall, based on the regression model and the given dividend.
To know more about correlation coefficient click on below link:
https://brainly.com/question/15577278#
#SPJ11
Consider a wire in the shape of a helix r(t) = 4 cos ti + 4 sin tj + 5tk, 0
The wire in the shape of a helix, described by r(t) = 4 cos(t)i + 4 sin(t)j + 5tk, forms a spiral curve that rotates around the z-axis. It has a radius of 4 units in the x-y plane and extends along the z-axis for a height of 5 units. This periodic and symmetric helix exhibits intriguing geometric properties and finds applications in various fields.
The wire in the shape of a helix is given by the equation r(t) = 4 cos(t)i + 4 sin(t)j + 5tk. This helix is parameterized by the variable t, which represents the angle of rotation around the helix. Let's explore the properties and characteristics of this helix in more detail.
The helix is defined in three-dimensional space by the position vector r(t), where i, j, and k represent the unit vectors along the x, y, and z-axes, respectively. The coefficients 4 and 5 determine the shape and size of the helix. The cosine and sine functions modulate the x and y coordinates, respectively, as t varies.
The helix has a radius of 4 units in the x-y plane, and it extends along the z-axis with a height of 5 units. As t increases, the helix rotates around the z-axis, creating a spiral shape. The period of the helix is 2π, meaning it completes one full rotation around the z-axis in 2π units of t.
To visualize the helix, we can plot points on the curve for different values of t. As t ranges from 0 to 2π, we obtain a complete representation of the helix. The helix starts at the point (4, 0, 0) when t = 0, and as t increases, it gradually winds around the z-axis, reaching its maximum height of 5 units when t = 2π.
One interesting property of this helix is that it is a periodic curve, meaning it repeats itself after one full rotation. This periodicity arises from the periodic nature of the cosine and sine functions. Additionally, the helix is symmetric with respect to the z-axis, as the coefficients of i and j are the same.
The helix can be useful in various applications, such as modeling DNA structures, representing spiral staircases, or describing the paths of certain celestial objects. Its elegant and repetitive nature makes it a fascinating geometric object to study.
In summary, the wire in the shape of a helix, described by r(t) = 4 cos(t)i + 4 sin(t)j + 5tk, forms a spiral curve that rotates around the z-axis. It has a radius of 4 units in the x-y plane and extends along the z-axis for a height of 5 units. This periodic and symmetric helix exhibits intriguing geometric properties and finds applications in various fields.
Learn more about helix here
https://brainly.com/question/2920404
#SPJ11
Here are two conjectures: Conjecture 1: For all integers a, b and c, if a | b and a | c, then a | bc. Conjecture 2: For all integers a, b and c, if a | c and b | c, then ab | c. Decide whether each conjecture is true or false and prove/disprove your assertions.
Conjecture 1 states that for all integers a, b, and c, if a divides b (a | b) and a divides c (a | c), then a divides the product of b and c (a | bc). This conjecture is true.
To prove this, let's assume a | b and a | c. This means that there exist integers k and l such that b = ak and c = al. Now, let's consider the product bc:
bc = (ak)(al) = a(kl).
Since kl is an integer (the product of two integers), we can conclude that a | bc. Therefore, Conjecture 1 is proven true.
Conjecture 2 states that for all integers a, b, and c, if a divides c (a | c) and b divides c (b | c), then the product of a and b (ab) divides c (ab | c). This conjecture is false.
To disprove this, let's consider a counterexample. Let a = 2, b = 3, and c = 6. In this case, 2 | 6 and 3 | 6, but 2 * 3 = 6, so 6 | 6. While this specific example holds true, let's consider a = 4, b = 6, and c = 12. Here, 4 | 12 and 6 | 12, but 4 * 6 = 24, which does not divide 12. Thus, we have found a counterexample, disproving Conjecture 2.
In summary, Conjecture 1 is true, and Conjecture 2 is false.
Learn more about Conjecture here:
https://brainly.com/question/11492642
#SPJ11
vector ⃗ has a magnitude of 13.1 and its direction is 50∘ counter‑clockwise from the - axis. what are the - and - components of the vector?
The x-component of the vector ⃗ is -9.98 and the y-component is 8.53.
We can find the x and y components of the vector ⃗ by using trigonometry. The magnitude of the vector is given as 13.1, and the direction of the vector is 50∘ counter-clockwise from the -axis. We can use the cosine and sine functions to find the x and y components, respectively.
cos(50∘) = -0.6428, sin(50∘) = 0.7660
x-component = magnitude x cos(50∘) = 13.1 x (-0.6428) = -9.98
y-component = magnitude x sin(50∘) = 13.1 x (0.7660) = 8.53
Therefore, the x-component of the vector ⃗ is -9.98, and the y-component is 8.53.
Learn more about vector here
https://brainly.com/question/25705666
#SPJ11
The x-component of the vector is approximately 8.375 and the y-component is approximately 9.955.
To find the x- and y-components of the vector, we can use trigonometry.
Given that the magnitude of the vector is 13.1 and the direction is 50° counter-clockwise from the - axis, we can determine the x- and y-components as follows:
The x-component (horizontal component) can be found using the formula:
x = magnitude * cos(angle)
x = 13.1 * cos(50°)
x ≈ 8.375
The y-component (vertical component) can be found using the formula:
y = magnitude * sin(angle)
y = 13.1 * sin(50°)
y ≈ 9.955
Know more about vector here:
https://brainly.com/question/29740341
#SPJ11
3. Jess starts a savings account using
a $50,000 life insurance inheritance
when she is 22 years old. Jess wants
to retire when the account has one
million dollars. If the account's
interest rate is 9% compounded
annually, calculate how long it will
take to reach one million dollars. At
what age will Jess retire?
Jess will retire at about 41.98 years historic or round her forty second birthday.
To calculate how lengthy it will take for Jess's financial savings account to attain one million dollars, we can use the system for compound interest:
A = P(1 + r/n)(nt)
Where:
A = Total quantity (one million bucks in this case)
P = Principal quantity (initial credit score of $50,000)
r = Annual hobby price (9% as a decimal, so 0.09)
n = Number of instances the hobby is compounded per yr (in this case, compounded annually)
t = Number of years
Substituting the given values into the formula, we have:
1,000,000 = 50,000(1 + 0.09/1)(1t)
Simplifying:
20 = (1.09)t
To clear up for t, we want to take the logarithm of each aspects of the equation. Let's use the herbal logarithm (ln) for this calculation:
ln(20) = ln(1.09)t
Using the logarithmic property, we can go the exponent t in front:
ln(20) = t * ln(1.09)
Now we can remedy for t with the aid of dividing each aspects by using ln(1.09):
t = ln(20) / ln(1.09)
Using a calculator, we discover that t ≈ 19.98 (rounded to two decimal places).
Therefore,
It will take about 19.98 years to attain one million bucks in Jess's financial savings account.
To decide at what age Jess will retire, we add the time it takes to attain one million bucks to her preliminary age of 22:
Age at retirement = 22 + 19.98 ≈ 41.98
For similar question on historic:
https://brainly.com/question/32158745
#SPJ11
if one score is randomly selected from a normal distribution with µ = 100 and σ = 20, the probability of obtaining a score less than x = 70 is p = 0.0013.
If the probability of obtaining a score less than x = 70 is p = 0.0013, the score that corresponds to a probability of 0.0013 is x = 38.2.
We are referring to a normal distribution with a mean (µ) of 100 and a standard deviation (σ) of 20. You want to find the probability of obtaining a score less than x = 70, and you provided that the probability (p) is 0.0013. In a normal distribution with µ = 100 and σ = 20, the probability of obtaining a score less than x = 70 is p = 0.0013. Based on the information given, we know that the probability of obtaining a score less than x = 70 is p = 0.0013. This means that the z-score for x = 70 is -3.09 (found using a standard normal distribution table or calculator).
To find the z-score, we use the formula:
z = (x - µ) / σ
Plugging in the values we know:
-3.09 = (70 - 100) / 20
Solving for x:
-3.09 = (x - 100) / 20
-3.09 * 20 = x - 100
-61.8 + 100 = x
x = 38.2
Therefore, the score that corresponds to a probability of 0.0013 is x = 38.2.
More on probability: https://brainly.com/question/30255967
#SPJ11
What fraction is more than 3/5 in this list? -> 20/100, 6/10, 1/2, 2/12 or 2/3
Answer:
2/3 is more than 3/5 since 10/15 is more than 9/15. As an alternate,
.6666.... is more than .6.
help step by step explanation 90 pts and if you get it right you will get the crown
Answer:
k=⅓
Step-by-step explanation:
In order to find the scale factors of A(0,6) and B(9,3) to A'(0,2) and B'(3,1):
Find the differences in the x-coordinates and y-coordinates of the corresponding points:
Δx = x-coordinate of B - x-coordinate of A = 9 - 0 = 9Δy = y-coordinate of B - y-coordinate of A = 3 - 6 = -3Find the differences in the x-coordinates and y-coordinates of the new corresponding points:
Δx' = x-coordinate of B' - x-coordinate of A' = 3 - 0 = 3Δy' = y-coordinate of B' - y-coordinate of A' = 1 - 2 = -1
Calculate the ratio of the differences:
Scale factor = Δx'/Δx = 3/9 = ⅓
Theretscale factor (k) is ⅓.
n Utapau, while riding a boga, General Kenobi dropped his lightsaber 405 feet down onto the platform where Commander Cody was. h(s)=−15s2+405h(s)=-15s2+405, gives the height after ss seconds.a) What type of function would best model this situation?Non-LinearLinearb) Evaluate h(4)h(4) =
a) The function that would best model this situation is a quadratic function since the height of the lightsaber changes with time at a constant rate.
b) To evaluate h(4), we substitute s = 4 into the function:
h(4) = -15(4)^2 + 405
h(4) = -15(16) + 405
h(4) = -240 + 405
h(4) = 165
Therefore, the height of the lightsaber after 4 seconds is 165 feet.
what is function?
In mathematics, a function is a relationship between a set of inputs and a set of possible outputs with the property that each input is related to exactly one output. It can be represented using a set of ordered pairs, where the first element of each pair is an input and the second element is the corresponding output.
To learn more about function visit:
brainly.com/question/12431044
#SPJ11
Miss Hess had a piece of ribbon that was 18 feet long. How many inches long was the ribbon?
Therefore, a long answer would be a detailed explanation of how to convert the units from feet to inches. A 250-word answer would include other possible ways to convert the units of measurement, for example, from inches to centimeters, yards to meters, miles to kilometers, etc.
To solve the given problem, we need to convert feet to inches. It is given that the ribbon is 18 feet long. We know that there are 12 inches in one foot.
Therefore, to find how many inches long was the ribbon, we need to multiply the length of the ribbon by 12. Thus,18 feet = 18 x 12 inches = 216 inches
Therefore, the ribbon is 216 inches long. In conclusion, the given ribbon was 216 inches long. The solution to this problem has a total of 57 words.
Therefore, a long answer would be a detailed explanation of how to convert the units from feet to inches. A 250-word answer would include other possible ways to convert the units of measurement, for example, from inches to centimeters, yards to meters, miles to kilometers, etc.
To know more about miles, click here
https://brainly.com/question/12665145
#SPJ11
How does the family-wise error rate associated with these m = 2 tests qualitatively compare to the answer in (b) with m = 2?
Answer:
The comparison of FWERs associated with different numbers of tests can help determine the level of multiple testing correction required to maintain the desired overall level of statistical significance.
Step-by-step explanation:
Without the context of what was asked in part (b), it is difficult to provide a direct comparison.
However, in general, the family-wise error rate (FWER) associated with multiple tests is the probability of making at least one type I error (false positive) across all the tests in a family.
The FWER can be controlled by using methods such as the Bonferroni correction, which adjusts the significance level for each individual test to maintain an overall FWER.
If the FWER associated with m = 2 tests is higher than the FWER calculated in part (b), then it means that the probability of making at least one false positive across the two tests is higher than
The maximum allowable probability of 0.05. In this case, one might need to adjust the significance level for each test to maintain the desired FWER.
On the other hand, if the FWER associated with m = 2 tests is lower than the FWER
calculated in part (b), then it means that the probability of making at least one false positive across the two tests is within the maximum allowable probability of 0.05, and no further adjustment may be necessary.
In summary, the comparison of FWERs associated with different numbers of tests can help determine the level of multiple testing correction required to maintain the desired overall level of statistical significance.
To know more about family-wise error rate refer here
https://brainly.com/question/29514656#
#SPJ11
Determine which ordered pairs are in the solution set of 6x - 2y < 8.
solution not solution
(0,-4)
(-4,0)
(-6,2)
(6,-2)
(0,0)
The ordered pairs are:
(0,-4) not a solution.(-4,0) a solution.(-6,2) a solution.(6,-2) not a solution.(0,0) a solution.Which ordered pairs are in the solution set?Here we have the following inequality:
6x - 2y < 8
To check if a ordered pair is a solution, we just need to replace the values in the inequality and see if it becomes true.
For the first one:
(0, -4)
6*0 - 2*-4 < 8
8 < 8 this is false.
(-4, 0)
6*-4 - 2*0 < 8
-24< 8 this is true.
(-6, 2)
6*-6 -2*2 < 8
-40 < 8 this is true.
(6, -2)
6*6 - 2*-2 < 8
40 < 8 this is false.
(0, 0)
6*0 - 2*0 < 8
0 < 8 this is true.
So the solutions are:
(-4, 0)
(-6, 2)
(0, 0)
Learn more about inequalities at:
https://brainly.com/question/24372553
#SPJ1
What is the radius of the circle?
Answer in units.
Kenna has a gift to wrap that is in the shape of a rectangular prism. The length is 12
inches, the width is 10 inches, and the height is 5 inches.
.
Write an expression that can be used to calculate the amount of wrapping paper
needed to cover this
prism.
• Will Kenna have enough wrapping paper to cover this prism if she purchases a roll
of wrapping paper that
covers 4 square feet?
The amount of wrapping paper needed to cover the prism is 2 * (12 * 10 + 12 * 5 + 10 * 5) square inches, and Kenna would have enough wrapping paper if she purchases a roll that covers 4 square feet.
To calculate the amount of wrapping paper needed to cover the rectangular prism, we need to find the surface area of the prism.
The surface area of a rectangular prism is calculated by adding the areas of all six faces.
Given the dimensions of the rectangular prism:
Length = 12 inches
Width = 10 inches
Height = 5 inches
The expression to calculate the amount of wrapping paper needed is:
2 * (length * width + length * height + width * height)
Substituting the values:
2 * (12 * 10 + 12 * 5 + 10 * 5) = 2 * (120 + 60 + 50) = 2 * 230 = 460 square inches
Therefore, Kenna would need 460 square inches of wrapping paper to cover the prism.
To determine if Kenna has enough wrapping paper, we need to convert the square inches to square feet since the roll of wrapping paper covers 4 square feet.
1 square foot = 144 square inches
Therefore, 460 square inches is equivalent to: 460 / 144 ≈ 3.19 square feet
Since Kenna purchases a roll of wrapping paper that covers 4 square feet, she would have enough wrapping paper to cover the prism.
Learn more about amount here:
https://brainly.com/question/31907517
#SPJ11
Let sin A = 1/3 where A terminates in Quadrant 1, and let cos B = 2/3, where B terminates in Quadrant 4. Using the identity:
cos(A-B)=cosACosB+sinAsinB
find cos(A-B)
Using trigonometric identity, cos(A-B) is:
[tex]cos (A-B) = \frac{2\sqrt{8}\ + \sqrt{5}}{9}[/tex]
How to find cos(A-B) using the trigonometric identity?Trigonometry deals with the relationship between the ratios of the sides of a right-angled triangle with its angles.
If sin A = 1/3 and A terminates in Quadrant 1. All trigonometric functions in Quadrant 1 are positive
sin A = 1/3 (sine = opposite/hypotenuse)
adjacent = √(3² - 1²)
= √8 units
cosine = adjacent/hypotenuse. Thus,
[tex]cos A = \frac{\sqrt{8} }{3}[/tex]
If cos B = 2/3 and B terminates in Quadrant 4.
opposite = √(3² - 2²)
= √5
In Quadrant 4, sine is negative. Thus:
[tex]sin B = \frac{\sqrt{5} }{3}[/tex]
We have:
cos(A-B) = cosA CosB + sinA sinB
[tex]cos (A-B) = \frac{\sqrt{8} }{3} * \frac{2}{3} + \left \frac{1}{3} * \frac{\sqrt{5} }{3}[/tex]
[tex]cos (A-B) = \frac{2\sqrt{8} }{9} + \left\frac{\sqrt{5} }{9}[/tex]
[tex]cos (A-B) = \frac{2\sqrt{8}\ + \sqrt{5}}{9}[/tex]
Learn more about Trigonometry on:
brainly.com/question/11967894
#SPJ1
Lacrosse players receive a randomly assigned numbered jersey to wear at games. If the jerseys are numbered 0 – 29, what is the probability the first player to be
assigned a jersey gets #16?
best explained gets most brainly.
The probability of the first player being assigned jersey number #16 is 1/30 or approximately 0.0333.
Since there are 30 jerseys numbered from 0 to 29, each jersey number has an equal chance of being assigned to the first player. Therefore, the probability of the first player being assigned the jersey number #16 is the ratio of the favorable outcome (getting jersey #16) to the total number of possible outcomes (all jersey numbers).
In this case, the favorable outcome is only one, which is getting jersey #16. The total number of possible outcomes is 30, as there are 30 jersey numbers available.
Therefore, the probability can be calculated as:
Probability = (Number of favorable outcomes) / (Total number of possible outcomes)
Probability = 1 / 30
Probability ≈ 0.0333
So, the probability of the first player being assigned jersey number #16 is approximately 0.0333 or 1/30.
Learn more about probability here:
https://brainly.com/question/32117953
#SPJ11
A firm has a production function given by Q=10K0.5L0.5. Suppose that each unit of capital costs R and each unit of labor costs W.a. Derive the long-run demands for capital and labor.b. Derive the total cost curve for this firm.c. Derive the long run average and marginal cost curves.d. How do marginal and average costs change with increases in output. Explaine. Confirm that the value of the Lagrange multiplier you get form the cost minimization problem in part a is equal to the marginal cost curve you found in part c.
The long-run demand for capital is proportional to output raised to the power of the elasticity of output with respect to capital, and the long-run demand for labor is proportional to output raised to the power of the elasticity of output with respect to labor.
a. The long-run demands for capital and labor can be found by minimizing the cost of producing a given level of output, subject to the production function. The cost of producing a given level of output is given by the product of the prices of capital and labor, multiplied by the amounts of each input used:
C = RK^αL^(1-α) + WL^αK^(1-α)
where α = 0.5 is the elasticity of output with respect to each input. The Lagrangian for this problem is:
L = RK^αL^(1-α) + WL^αK^(1-α) - λQ
Taking the partial derivative of L with respect to K, L, and λ and setting each equal to zero, we get:
∂L/∂K = αRK^(α-1)L^(1-α) + WL^α(1-α)K^(-α) = 0
∂L/∂L = (1-α)RK^αL^(-α) + αWL^(α-1)K^(1-α) = 0
∂L/∂λ = Q = 10K^0.5L^0.5
Solving these equations simultaneously, we get:
K = (αR/W)Q
L = ((1-α)W/R)Q
Therefore, the long-run demand for capital is proportional to output raised to the power of the elasticity of output with respect to capital, and the long-run demand for labor is proportional to output raised to the power of the elasticity of output with respect to labor.
b. The total cost curve can be derived by substituting the long-run demands for capital and labor into the cost function:
C = R(αR/W)^α(1-α)Q + W((1-α)W/R)^(1-α)αQ
Simplifying, we get:
C = Rα^(α/(1-α))W^((1-α)/(1-α))Q + W(1-α)^((1-α)/α)R^(α/α)Q
c. The long-run average cost (LRAC) curve can be found by dividing total cost by output:
LRAC = C/Q = Rα^(α/(1-α))W^((1-α)/(1-α)) + W(1-α)^((1-α)/α)R^(α/α))/Q
The long-run marginal cost (LRMC) curve can be found by taking the derivative of total cost with respect to output:
LRMC = dC/dQ = Rα^(α/(1-α))W^((1-α)/(1-α)) + W(1-α)^((1-α)/α)R^(α/α)
d. The marginal cost (MC) curve represents the additional cost incurred by producing one more unit of output, while the average cost (AC) curve represents the average cost per unit of output. If the marginal cost is less than the average cost, then the average cost is decreasing with increases in output. If the marginal cost is greater than the average cost, then the average cost is increasing with increases in output. If the marginal cost is equal to the average cost, then the average cost is at a minimum. In this case, the LRMC curve is constant and equal to LRAC, which means that the long-run average cost is constant and the firm is experiencing constant returns to scale. Therefore, both the LRMC and LRAC curves are horizontal, and neither increases nor decreases with increases in output.
Learn more about elasticity here
https://brainly.com/question/1048608
#SPJ11
True or False? Explain. A Pearson correlation of r = -0.90 indicates that the data points are clustered close to a line that slopes down to the right.
True. A Pearson correlation of r = -0.90 indicates that the data points are clustered close to a line that slopes down to the right is True.
A Pearson correlation coefficient (r) ranges from -1 to 1, where -1 indicates a perfect negative correlation (all data points are on a straight line that slopes down to the right), 0 indicates no correlation (data points are randomly scattered), and 1 indicates a perfect positive correlation (all data points are on a straight line that slopes up to the right). T
herefore, a Pearson correlation coefficient of r = -0.90 indicates a strong negative correlation, where the data points are clustered close to a line that slopes down to the right.
When the correlation coefficient is negative, it means that as one variable increases, the other variable decreases. A correlation coefficient of -0.90 indicates a very strong negative relationship between the two variables, where one variable is decreasing at a constant rate as the other variable increases.
This results in the data points being clustered close to a straight line that slopes down to the right, as they are all moving in the same direction with a high degree of consistency. Therefore, the statement is true, and a Pearson correlation coefficient of r = -0.90 indicates that the data points are clustered close to a line that slopes down to the right.
To know more about correlation, visit;
https://brainly.com/question/4219149
#SPJ11