A chemical reaction occurs when the strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. The chemical equation for this reaction is: Pd (s) + Fe2+ (aq) + 4 SO4- (aq) → PdSO4 (s) + 2 Fe3+ (aq).
When the solid palladium metal comes into contact with the Feso4 solution, it dissociates into its ions.
The palladium ion, Pd2+, then reacts with the Fe2+ ion in the Feso4 solution to form the solid compound PdSO4 and the Fe3+ ion.
No reaction occurs when a strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. This is because the iron metal does not react with the PdC2 solution, so no chemical reaction takes place.
to know more about palladium refer here:
https://brainly.com/question/11112313#
#SPJ11
students conducting research observe the rate of an enzyme-catalyzed reaction under various conditions with a fixed amount of enzyme in each sample. when will increasing the substrate concentration likely result in the greatest increase in the reaction rate?
Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.
The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.
When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.
So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.
However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.
Learn more about substrate concentration here:
https://brainly.com/question/22428921
#SPJ11
Mono addition of HBr to conjugated dienes leads to multiple products, and a given addition product can arise from more than one conjugated diene. Given below are the structures of five pairs of dienes - possible reactants in the reaction - and two allylic bromide products. Identify the pair of dienes wherein each diene can serve as a precursor for both of the addition products. Note that not all possible products are shown.
Mono addition of HBr to conjugated dienes leads to multiple products, and a given addition product can arise from more than one conjugated diene. The pair of dienes which can serve as precursors for both of the addition products are diene 1 and diene 2. Diene 1 can give rise to the allylic bromide product A as well as product B.
Diene 2 can give rise to the allylic bromide product C as well as product B.
The other three dienes cannot give rise to either of the two given allylic bromide products.
The given pairs of dienes are:
(a) H2C=CHCH=CH2 and H2C=CHCH2CH=CH2
(b) H2C=CHCH=CH2 and H2C=CHCH=CHCH3
(c) H2C=CHCH=CHCH3 and H2C=CHCH2CH=CH2
(d) H2C=CHCH=CHCH3 and H2C=CH2CH=CHCH3
(e) H2C=CHCH=CHCH3 and H2C=CH=CHCH2CH3 The given allylic bromide products are 1,2-dibromobutane and 2-bromo-2-butene respectively. Hence, the correct pair of dienes is (b) H2C=CHCH=CH2 and H2C=CHCH=CHCH3, since both of these dienes can act as precursors for both of the allylic bromide products.
For more such questions on HBr
https://brainly.com/question/12858312
#SPJ11
how to use edurus and maxima potions simultaneously?
It is not possible to use Edurus and Maxima potions simultaneously in the Harry Potter world.
According to the books and movies, each potion has a specific purpose and cannot be combined for a stronger effect. Edurus is a healing potion that can mend broken bones and heal other injuries, while Maxima is a spell that amplifies the strength of a spell. Therefore, the two have entirely different functions and cannot be used together.However, in some Harry Potter video games, it may be possible to use these potions together. Still, it is not consistent with the canon of the books and movies. In conclusion, it is not possible to use Edurus and Maxima potions simultaneously in the Harry Potter universe, as they serve two entirely different functions.
For more questions on Edurus
https://brainly.com/question/30766927
#SPJ11
The enthalpy of vaporization for methanol is 35.2 kJ/ mol. Methanol has a vapor pressure of 1 atm at 64.7 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 41.9 °C?
Give your answer in atmospheres, to the third decimal point.
Question 2
3 pts
The enthalpy of vaporization for dimethyl ether is 27.5 kJ/mol. Dimethyl ether has a vapor pressure of 760 torr at 34.6 °C. Using the Clausius-Clapeyron equation, what is the vapor pressure tor methanol at 0.1 °C? Give your answer in torr, to the first decimal point.
Answer:
To use the Clausius-Clapeyron equation, we need to know two sets of conditions for the substance in question. Let's start with question 1:
Question 1:
Given:
Enthalpy of vaporization, ΔHvap = 35.2 kJ/mol
Vapor pressure at T1 = 1 atm (or 760 torr), T1 = 64.7°C
We want to find: Vapor pressure at T2 = 41.9°C
First, we need to convert temperatures to Kelvin:
T1 = 64.7 + 273.15 = 337.85 K
T2 = 41.9 + 273.15 = 315.05 K
Now we can use the Clausius-Clapeyron equation:
ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)
where P1 and P2 are the vapor pressures at temperatures T1 and T2, respectively, R is the gas constant (8.314 J/mol·K), and ln is the natural logarithm.
Solving for P2, we get:
P2/P1 = e^(-ΔHvap/R * (1/T2 - 1/T1))
P2 = P1 * e^(-ΔHvap/R * (1/T2 - 1/T1))
Substituting the given values, we get:
P2 = 1 atm * e^(-35.2 kJ/mol / (8.314 J/mol·K) * (1/315.05 K - 1/337.85 K))
P2 = 0.496 atm
Rounding to three decimal places, the vapor pressure of methanol at 41.9°C is 0.496 atm.
Answer: 0.496 atm
Question 2:
Given:
Enthalpy of vaporization, ΔHvap = 27.5 kJ/mol
Vapor pressure at T1 = 760 torr, T1 = 34.6°C
We want to find: Vapor pressure at T2 = 0.1°C
Converting temperatures to Kelvin:
T1 = 34.6 + 273.15 = 307.3 K
T2 = 0.1 + 273.15 = 273.25 K
Using the Clausius-Clapeyron equation:
ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)
Solving for P2, we get:
P2/P1 = e^(-ΔHvap/R * (1/T2 - 1/T1))
P2 = P1 * e^(-ΔHvap/R * (1/T2 - 1/T1))
Substituting the given values, we get:
P2 = 760 torr * e^(-27.5 kJ/mol / (8.314 J/mol·K) * (1/273.25 K - 1/307.3 K))
P2 = 7.25 torr
Rounding to one decimal place, the vapor pressure of dimethyl ether at 0.1°C is 7.3 torr.
Answer: 7.3 torr
Addition of phenolphthalein to an unknown colorless solution does not cause a color change. The addition of bromthymol blue to the same solution leads to a yellow color.
A)s the solution acidic, neutral, or basic?
B) Which of the following can you establish about the solution: a) a max pH b)a specific range of pH value c) a min pH
C) What other indicator or indicators would you want to use to determine the pH of the solution more precisely? (more than one may apply) alizarin yellow R, methyl violet, methyl red , or all the above.
If yellow bromthymol blue is present, the solution is acidic. In an acidic solution, phenolphthalein, an acid-base indicator, is colourless; nevertheless, as the solution becomes alkaline, it turns pink or red.
The phenolphthalein indicator changes what colour?An indicator, such as phenolphthalein, changes colour when it comes into contact with an acid or a basic. If it comes into contact with an acid like vinegar or a neutral substance like water, it remains colourless; if it comes into contact with something basic like ammonia, it turns purple.
What shade of blue does bromothymol have in both an acid and a base?The acid bromthymol blue is weak. Depending on the pH of the solution, it may take the form of an acid or a basic. This reagent turns blue in basic solutions and yellow in acidic solutions.
To know more about indicator visit:-
brainly.com/question/29016702
#SPJ1
valency of aluminum is 3 give reason
Answer:
The valency of an element refers to the number of electrons an atom can gain, lose or share to attain a stable configuration.
Aluminum (Al) is a metal with an atomic number of 13, which means it has 13 electrons in its neutral state. In its outermost shell, aluminum has three valence electrons.
To attain a stable electronic configuration, aluminum can lose these three valence electrons to become a cation with a 3+ charge (Al3+). By losing these electrons, the outermost shell of the aluminum atom becomes completely filled with eight electrons, which is a stable configuration.
Therefore, the valency of aluminum is 3 because it can lose three electrons to form a stable cation with a 3+ charge.
Explanation:
Answer:
The valency of an element refers to the number of electrons an atom can gain, lose or share to attain a stable configuration.
Aluminum (Al) is a metal with an atomic number of 13, which means it has 13 electrons in its neutral state. In its outermost shell, aluminum has three valence electrons.
To attain a stable electronic configuration, aluminum can lose these three valence electrons to become a cation with a 3+ charge (Al3+). By losing these electrons, the outermost shell of the aluminum atom becomes completely filled with eight electrons, which is a stable configuration.
Therefore, the valency of aluminum is 3 because it can lose three electrons to form a stable cation with a 3+ charge.
Explanation:
How much cesium (half-life = 2 years) would remain from a 10 g sample after 2 years?
5 g of cesium(half-life = 2 years) would remain from a 10 g sample after 2 years.
Cesium has a half-life of 2 years. The half-life of a material is the length of time necessary for half of it to degrade or react. Half-life is a property of a chemical that is commonly represented by the sign "t½".
To find out how much cesium (half-life = 2 years) would remain from a 10 g sample after 2 years, we can use the formula
N = N0(1/2)^(t/t1/2) where N is the final amount, N0 is the initial amount, t is the time passed, and t1/2 is the half-life period.
In this case, N0 = 10 g, t = 2 years, and t1/2 = 2 years.
Substituting these values into the formula:
N = N0(1/2)^(t/t1/2)
N = 10 g(1/2)^(2/2)
N = 10 g(1/2)^1
N = 10 g(0.5)
N = 5 g
For more such questions on half-life, click on:
https://brainly.com/question/14936355
#SPJ11
Which one of the following salts, when 1 mole is dissolved in water, produces the solution with a pH closest to 7.00? A) NH4BR B) NaHSO4 C) NaF D) Ba O E) LiOH
When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The resulting solution is slightly basic, with a pH slightly greater than 7. The correct answer is C) NaF.
What are salts?Salts are ionic compounds formed from the reaction between an acid and a base. They are composed of positively charged ions (cations) and negatively charged ions (anions). Salts are typically solid at room temperature and have high melting and boiling points.
When dissolved in water, salts can dissociate into their component ions, allowing them to conduct electricity. Some common examples of salts include table salt (NaCl), baking soda (NaHCO3), and Epsom salt (MgSO4).
When NaF is dissolved in water, it undergoes hydrolysis to form Na+ and F- ions. The F- ions react with water molecules to form HF and OH- ions. The resulting solution is slightly basic, with a pH slightly greater than 7.
Learn more about salts here https://brainly.com/question/13818836
#SPJ1
identify the options below that are results of adding a catalyst to a chemical system. (select all that apply) select all that apply: the reaction rates are increased. the reaction quotient is unaffected. the reaction quotient decreases. the equilibrium constant is unaffected
Adding a catalyst to a chemical system has some certain effects including increased reaction rates, reaction quotient is unaffected.
What is a catalyst?A catalyst is an element or compound that speeds up the rate of a chemical reaction by lowering the activation energy barrier. The catalyst provides an alternative mechanism with a smaller activation energy that is followed by the reactants. As a result, adding a catalyst to a chemical system increases the reaction rate.
The reaction quotient is unaffected: When a catalyst is added to a chemical system, the reaction quotient is not affected because it does not change the composition of the equilibrium mixture. Therefore, adding a catalyst to a chemical system does not have an effect on the reaction quotient.
Therefore, the correct options are A and B.
Learn more about Catalyst here:
https://brainly.com/question/24430084
#SPJ11
The volume of a gas is increased from 0.5L to 4.0 L while the temperature is held constant. Thepressure of the gas:A. increases by a factor of fourB. decreases by a factor of eightC. increases by a factor of eightD. increases by a factor of two
The volume of a gas is increased from 0.5L to 4.0 L while the temperature is held constant. The pressure of the gas decreases by a factor of eight.
Charles's Law- Charles's Law is a physical law that states that for a fixed mass of gas held at a constant pressure, the volume of the gas is directly proportional to the absolute temperature of the gas.
V1/T1=V2/T2 (Constant Pressure)
Boyle's Law- Boyle's law is a gas law that states that the pressure applied to a gas at a constant temperature is inversely proportional to the volume of the gas.
P1V1 = P2V2 (Constant Temperature)
What is the ideal gas law? The ideal gas law is a physical law that describes the behavior of an ideal gas in terms of its pressure, volume, temperature, and the number of particles present.
PV = nRT
Where: P = pressure, V = volumen = number of particles present, R = ideal gas constant, T = absolute temperature
What happens to the pressure of the gas when the volume of the gas is increased? The pressure of the gas decreases when the volume of the gas is increased while holding the temperature constant. Therefore, when the volume of the gas increases from 0.5L to 4.0 L while the temperature is held constant, the pressure of the gas decreases.
The correct answer is B. decreases by a factor of eight.
To learn more about "volume of a gas", visit: https://brainly.com/question/27100414
#SPJ11
i) what would happen to the Vmax of the enzyme if you were to reduce the substrate concentration by 50%?ii)provide reasoning. Less than 50 words total
1) If you reduce the substrate concentration by 50%, the Vmax of the enzyme will decrease proportionally.ii) When the substrate concentration is lowered, fewer substrates will bind to the enzyme, resulting in a lower rate of product formation. As a result, the enzyme's maximum velocity (Vmax) will decrease, and the reaction's rate will slow. As a result, the kinetic parameters of the enzyme, including Vmax and Km, will change.
2) The Vmax of an enzyme is the maximum rate of the reaction that can be achieved by the enzyme when it is saturated with a substrate. A decrease in the substrate concentration means that the enzyme's active sites are less likely to be filled with substrates, and the maximum rate of the reaction that can be achieved by the enzyme decreases in proportion.
As the substrate concentration is lowered, the enzyme's Vmax decreases. The enzyme-substrate complex's kinetics are influenced by the substrate concentration. The Michaelis-Menten equation is used to describe the relationship between the substrate concentration and the reaction rate. The Km value and the Vmax value are two constants in the Michaelis-Menten equation.
Know more about Michaelis-Menten here:
https://brainly.com/question/30756012
#SPJ11
the nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min. the oxidation half-reaction converts nickel atoms to nickel(ii) ions. what is the constant current
The constant current is 0.0406 A for the nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min. the oxidation half-reaction converts nickel atoms to nickel(ii) ions.
What is the constant current?In an electrolytic cell, the oxidation half-reaction converts nickel atoms to nickel (II) ions, and the nickel anode in an electrolytic cell decreases in mass by 1.20 g in 35.5 min.
To determine the constant current, we can use Faraday's laws. Faraday's laws were established by Michael Faraday, a British scientist, in the early 19th century. His laws explain how much mass will be lost or gained at an electrode during electrolysis and how much electrical energy is required. Faraday's first law states that the mass of a substance deposited during electrolysis is proportional to the number of electrons that pass through the electrolyte.
The following formula can be used to calculate the constant current:
I = (nF / t) × (m / M)
where, I = Constant Current (in amperes), n = number of moles of electrons transferred, F = Faraday constant (96500 C/mol), t = Time taken, m = mass of substance (in grams), M = Molar mass of the substance (in grams/mol)
The Faraday constant is the amount of charge that must pass through an electrode to deposit or liberate 1 mole of any substance. For nickel, the molar mass is 58.69 g/mol, and the oxidation state is +2, which means that two electrons are lost per nickel atom. Thus, n = 2.
To calculate the current, we must first find the number of moles of nickel atoms lost during electrolysis. The formula for the number of moles is:
n = m / M
n = 1.20 g / 58.69 g/mol
n = 0.0204 mol.
Now we can use the formula above to calculate the current:
I = (nF / t) × (m / M)
I = (2 × 96500 C/mol / 2130 seconds) × (1.20 g / 58.69 g/mol)
I = 0.0406 A
I = 40.6 mA or 0.0406 A.
Therefore, the constant current is 40.6 mA or 0.0406 A.
Read more about current here:
https://brainly.com/question/12815553
#SPJ11
F. Recognize that there are more than 100 elements and some have
similar properties as shown on the Periodic Table of Elements.
Type of Element Metals
Properties
Examples:
Nonmetals
Metalloids
Helgitula
Answer:
Metals are malleable, and ductile, have a shiny luster, form metallic bonds, and are superb conductors (to name some properties).
Ex. Copper
Malleable is the ability to be pounded into thin sheets.
Ductile is the ability to be drawn into a thin wire.
Metallic is metal-to-metal bonding.
Nonmetals, however, are not malleable, or ductile, are not good conductors and form covalent and ionic bonds.
Ex. Carbon
Covalent is nonmetal-to-nonmetal bonding.
Ionic is metal-to-nonmetal bonding.
Metalloids
Semiconductors, and are basically metal and nonmetal properties combined. I.E. Has a metallic luster but is brittle (not malleable).
Ex. Sillicon
label each reactant and product in this reaction as a brønsted acid or base.CH3OH + OH- ----> CH3O- + H2Obaseacid
Methanol, or CH3OH, is a Brnsted-Lowry base in this reaction because it can receive a proton from the hydroxide ion, or OH-, to generate CH3O- (methoxide ion).
The Brnsted-Lowry base OH- (hydroxide ion), on the other hand, may transfer a proton (H+) to[tex]CH3OH[/tex]to create H2O. (water).So the reactants are CH3OH (base) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).I apologize for the mistake in my previous response. You are correct that methanol, or CH3OH, is a Brønsted-Lowry acid in this reaction because it donates a proton (H+) to the hydroxide ion (OH-) to form CH3O- (methoxide ion). The hydroxide ion (OH-) is a Brønsted-Lowry base because it accepts a proton (H+) from CH3OH to form H2O (water). Therefore, the reactants are [tex]CH3OH[/tex] (acid) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).
learn more about Methanol, or CH3OH here:
https://brainly.com/question/14278895
#SPJ4
How does the number of dissolved ions in solution affect the boiling point of that solution?
A solution's boiling point rises as the amount of dissolved ions increases because more energy is needed to overcome greater intermolecular interactions that occur between the ions and solvent molecules.
The intermolecular interactions between the molecules of the solute and solvent are impacted when a solute is dissolved in a solvent. When it comes to ionic solutes, the ions separate and create ion-dipole interactions with the solvent molecules. In non-ionic solutions, these interactions are more potent than the dipole-dipole and London dispersion forces. Because the intermolecular interactions in a solution with more dissolved ions are stronger, more energy is needed to overcome them and reach the boiling point. The van 't Hoff factor, which measures the amount of ions created by each solute molecule, and the molality of the solution are used to quantify the boiling point elevation impact.
learn more about boiling point here:
https://brainly.com/question/25777663
#SPJ4
Show the Structural feature that distinguishes whether a hydrocarbon is an(a)alkane(b)alkene(c)alkyne(d)aromaticGive an example for each of the above hydrocarbons.
The structural feature that distinguishes whether a hydrocarbon is an alkane, alkene, alkyne, or aromatic is the type of carbon-carbon bonding present in the molecule.
(a) Alkanes have single covalent bonds between all carbon atoms in the molecule. Ethane (C2H6). (b) Alkenes have at least one double covalent bond between two carbon atoms in the molecule. Example: Ethene (C2H4). (c) Alkynes have at least one triple covalent bond between two carbon atoms in the molecule. Example: Ethyne (C2H2). (d) Aromatic hydrocarbons have a cyclic structure with alternating double bonds that form a delocalized pi electron system known as an aromatic ring. Example: Benzene (C6H6).
To know more about carbon-carbon bonding, here
brainly.com/question/12156863
#SPJ4
How many molecules of oxygen are produced by the decomposition of 6. 54 g of potassium chlorate (KCLO3)?
The breakdown of 6.54 g of potassium chlorate results in the production of 4.81 x [tex]10^{22}[/tex]oxygen molecules.
The balanced chemical equation for the decomposition of potassium chlorate is:
2 KClO3(s) → 2 KCl(s) + 3 O2(g)
This equation tells us that for every 2 moles of potassium chlorate that decompose, 3 moles of oxygen gas are produced.
To determine the number of molecules of oxygen produced by the decomposition of 6.54 g of potassium chlorate, we first need to convert the mass of potassium chlorate to moles using its molar mass. The molar mass of KCLO₃ is:
K: 39.10 g/mol
Cl: 35.45 g/mol
O: 3(16.00 g/mol) = 48.00 g/mol
Total molar mass of KCLO₃: 39.10 + 3(35.45) + 48.00 = 122.55 g/mol
Number of moles of KCLO₃ = 6.54 g / 122.55 g/mol = 0.0533 mol
Now we can use the mole ratio from the balanced equation to calculate the number of moles of oxygen produced:
3 moles O₂ / 2 moles KCLO₃ = x moles O₂ / 0.0533 moles KCLO₃
x = 3/2 x 0.0533 = 0.0799 moles O₂
Finally, we can convert the number of moles of oxygen to the number of molecules using Avogadro's number:
Number of molecules of O2 = 0.0799 mol x 6.022 x [tex]10^{23}[/tex] molecules/mol = 4.81 x [tex]10^{22}[/tex] molecules
Therefore, 4.81 x [tex]10^{22}[/tex] molecules of oxygen are produced by the decomposition of 6.54 g of potassium chlorate.
To learn more about molecules refer to:
brainly.com/question/14646440
#SPJ4
Preparations of lead compounds and percentage yield
A chemical substance or natural product known as a lead compound has biological action against a pharmacological target.
A critical phase of the drug discovery program is lead identification and optimization.
There are two main oxidation states for compounds containing lead: +2 and +4. The first is more typical. Strong oxidants or only occurring in extremely acidic conditions are typical characteristics of inorganic lead(IV) compounds.
The percent yield equation is:
percent yield = actual yield/theoretical yield x 100%
The ratio of the actual yield to the theoretical yield multiplied by 100 is the percent yield.
Characterizing natural products, using combinatorial chemistry, or using molecular modeling as in rational drug design are methods for finding lead compounds. Lead compounds can also be made from substances that high-throughput screening identified as hits.
To know about yield
https://brainly.com/question/2506978
#SPJ4
which enzyme is used to break down triacylglycerol into fatty acids and glycerol?
Triacylglycerol is broken down by the enzyme lipase into fatty acids and glycerol. It is released by the pancreas and other digestive organs and is essential to the body's ability to digest and absorb fats.
Lipase is the enzyme that converts triacylglycerol into fatty acids and glycerol. The pancreas and other digestive organs release lipase, which is essential for the breakdown and absorption of fats in the body. Triacylglycerols are a kind of lipid that is frequently present in meals including meat, dairy goods, and oils. The triacylglycerol molecule's fatty acid ester linkages are hydrolyzed by lipase, releasing the molecules' separate fatty acids and glycerol. The body's cells can utilize these smaller parts for energy or store them as fat when they are absorbed into the circulation and delivered there. Other lipids, including phospholipids and cholesterol esters, are also broken down by lipase. and is essential for maintaining proper lipid metabolism and homeostasis in the body.
learn more about Triacylglycerol here:
https://brainly.com/question/29697122
#SPJ4
what determines the difference in size of atoms or ions if they are isoelectronic? select the correct answer below: a. the number of orbitals b. the number of neutrons c. the number of electrons d. the number of protons
The option determines the difference in size of atoms or ions if they are isoelectronic is option D which is the number of protons.
Isoelectronic explained.
Isoelectronic is a term used in chemistry to describe two or more atoms or ions that have the same number of electrons. These species may have different numbers of protons and neutrons in their nuclei, but they all have the same electron configuration.
For example, the nitrogen atom has 7 electrons, while the fluoride ion (F-) has 10 electrons. However, if we add three more electrons to the nitrogen atom to form the nitrogen ion (N3-), it will have the same number of electrons as the fluoride ion (10 electrons). Therefore, the nitrogen ion and the fluoride ion are isoelectronic.
The difference in size between two isoelectronic species is determined by the number of protons in the nucleus. This is because the number of protons determines the strength of the electrostatic attraction between the positively charged nucleus and the negatively charged electrons.
As the number of protons in the nucleus increases, the electrostatic attraction becomes stronger, which pulls the electrons closer to the nucleus and reduces the atomic or ionic radius. Therefore, the correct answer is d. the number of protons.
Learn more about isoelectronic below.
https://brainly.com/question/1626090
#SPJ1
Calculate the [H3O+] and the pH of a 0.140 M H3C6H5O7 solution.
The [H₃O+] and the pH of a 0.140 M H₃C₆H₅O₇ solution is [H₃O+] = 1.49 ×[tex]10^-3[/tex]M, and pH = -log[H₃O+] = 2.83.
H₃C₆H₅O₇ is a weak acid, so we need to use the acid dissociation constant (Ka) to calculate the [H₃O+] and pH of its solution. The Ka for H₃C₆H₅O₇ is 6.3 × [tex]10^-5.[/tex]
The balanced chemical equation for the dissociation of H₃C₆H₅O₇ in water is:
H₃C₆H₅O₇ + H2O ⇌ H3O+ + H₃C₆H₅O₇-
At equilibrium, let x be the concentration of H₃O+ and H₃C₆H₅O₇-. Then:
Ka = [H₂O+][ H₃C₆H₅O₇-] / [H3C6H5O7]
Ka = [tex]x^2[/tex]/ (0.140 - x)
Assuming that x is much smaller than 0.140, we can simplify this equation to:
[tex]x^2[/tex] = Ka × 0.140
x = √(Ka × 0.140)
x = √(6.3 × [tex]10^-5[/tex]× 0.140)
x = 1.49 × [tex]10^-3[/tex]M
solution is a homogeneous mixture of two or more substances that are uniformly dispersed throughout the mixture. The substance that is present in the largest amount is called the solvent, and the substances that are dissolved in the solvent are called solutes.
Learn more about solution here:
https://brainly.com/question/30665317
#SPJ4
what relative masses of dimethyl amine and dimethyl ammonium chloride do you need to prepare a buffer solution of ph = 10.54?
To prepare a buffer solution of pH = 10.54, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.
A buffer solution is a solution that has the ability to resist changes in pH upon the addition of small amounts of acid or base. A buffer solution contains a weak acid and its conjugate base or a weak base and its conjugate acid. It can be prepared by mixing equal volumes of a weak acid and its conjugate base or a weak base and its conjugate acid.
Dimethyl amine is an organic compound with the formula (CH3)2NH. It is a weak base and can act as a proton acceptor. Dimethyl ammonium chloride is an organic compound with the formula (CH3)2NH2Cl. It is a salt of a weak base and a strong acid and can act as a proton donor.
Calculation of relative masses:
The pKa of dimethyl amine is 10.73.
To prepare a buffer solution of pH = 10.54,
the ratio of [A-]/[HA] should be 1/9.
Using the Henderson-Hasselbalch equation;
pH = pKa + log([A-]/[HA])10.54 = 10.73 + log([A-]/[HA])
log([A-]/[HA]) = -0.19[A-]/[HA] = 0.67/1.00
The sum of the masses of dimethyl amine and dimethyl ammonium chloride is 0.146 g. The ratio of their masses is 0.67:1.00.
So, the relative masses of dimethyl amine and dimethyl ammonium chloride needed are 0.079 g and 0.067 g respectively.
To know more about Buffer solution refer here :
https://brainly.com/question/13076037
#SPJ11
Select all of the following lab techniques that you will utilize in the Recystallization experiment is called
The correct answer is that the recrystallization is a common technique used to purify solid compounds in organic chemistry.
The following are some of the lab techniques that may be utilized in a recrystallization experiment: Dissolving the impure compound in a suitable solvent. Filtering the solution to remove insoluble impurities. Heating the solution to dissolve the compound completely. Allowing the solution to cool slowly to allow the compound to crystallize out. Filtering the crystallized product using a Buchner funnel or filter paper. Washing the product with a suitable solvent to remove any remaining impurities. Drying the product using a desiccator or oven. Other techniques that may be used in conjunction with recrystallization include melting point determination, thin-layer chromatography, and spectroscopic analysis to confirm the purity and identity of the compound.
To learn more about recrystallization click the link below
brainly.com/question/29215760
#SPJ4
Is sodium hydroxide a physical or chemical property?
The correct answer is that Sodium hydroxide (NaOH) is a chemical compound that consists of sodium ions (Na+) and hydroxide ions (OH-).
Sodium hydroxide is commonly known as caustic soda and is used in many industrial processes, including paper production, soap making, and water treatment. Since sodium hydroxide is a chemical compound, it is considered a chemical property rather than a physical property. A physical property is a characteristic of a substance that can be observed or measured without changing the identity or composition of the substance, while a chemical property is a characteristic of a substance that describes how it interacts with other substances to form new substances. Sodium hydroxide is highly reactive and can undergo chemical reactions with a variety of other substances. For example, it can react with acids to form salts and water, and with certain metals to produce hydrogen gas. These chemical reactions are a result of the chemical properties of sodium hydroxide and its ability to react with other substances, indicating that it is a chemical property.
To learn more about Sodium hydroxide click the link below
brainly.com/question/18723610
#SPJ4
what was an early outcome of regime change in iraq?
Saddam Hussein's overthrow in 2003 was one of the early results of regime transition in Iraq. Given that Hussein had been in charge of Iraq's government and society for more than 20 years,
this represented a dramatic change in the political landscape of the nation. Regime transition, however, was followed by a turbulent era of political unrest and sectarian warfare. Broader geopolitical repercussions of the US-led invasion of Iraq and subsequent government change included strained ties with other nations in the region, a rise in anti-American sentiment, and the creation of new extremist organizations like ISIS. The long-term implications of the Iraqi government transition are still being discussed and examined, although is clear that the initial outcome was one of significant.
learn more about Iraq here:
https://brainly.com/question/29605758
#SPJ4
A sample of dinitrogen tetroxide (N204) gas occupies 144 L at STP. How many moles of nitrogen atoms are present in this sample?
The number of moles of nitrogen atoms present in the sample is: 12.86 mol of nitrogen atoms
At STP (Standard Temperature and Pressure), the temperature is 273 K and the pressure is 1 atm. The molar volume of any ideal gas at STP is 22.4 L/mol. Therefore, the number of moles of N204 gas present in the sample can be calculated as:
n = V/VM
where n is the number of moles, V is the volume of the gas, and VM is the molar volume of the gas at STP.
n = 144 L / 22.4 L/mol = 6.43 mol
Since dinitrogen tetroxide contains two nitrogen atoms per molecule, the number of moles of nitrogen atoms present in the sample is:
2 x 6.43 mol = 12.86 mol of nitrogen atoms.
To know more about atoms click here:
brainly.com/question/29695801
#SPJ4
Name the following compounds:
The names of the given compounds are:
a) Carbon tetrachloride
b) 1-chloro-2-chloromethane (also known as chloroethyl chloride)
c) 1,2-dichloroethane
d) 2-chloro-2-methylbutane
e) 1,4-dichlorobutane
What are compoundsA compound is a substance made up of two or more different elements chemically combined in fixed proportions. The elements in a compound are held together by chemical bonds, which are formed when atoms of different elements share or transfer electrons to achieve a stable electron configuration.
Compounds have unique properties that are different from their constituent elements, such as melting point, boiling point, density, and reactivity. They can be formed through various chemical reactions, such as synthesis, decomposition, combustion, and oxidation. Examples of common compounds include water (H2O), table salt (NaCl), carbon dioxide (CO2), and glucose (C6H12O6).
Learn more about chemical compounds here https://brainly.com/question/29594386
#SPJ1
Which of the following transitions (in a hydrogen atom) represents absorption of the shortest wavelength photon?A) n = 5 to n = 6.B) n = 4 to n = 5.C) n = 6 to n = 5.D) n = 7 to n = 6.E) n = 2 to n = 4.
The transition from n=2 to n=4 has the shortest wavelength photon absorption.
The electron in the hydrogen atom may only reside in a limited range of energy levels or orbitals, denoted by the primary quantum number, n. The energy levels rise as n rises, and an electron can transition from one energy level to another by absorbing a photon with an energy equal to the difference between the initial and final energy levels. A photon's energy is directly inversely correlated with its wavelength and directly correlated with its frequency. The transition from n=2 to n=4, which has the largest energy difference, includes the absorption of the photon with the shortest wavelength. The emission of ultraviolet light occurs from this transition, which corresponds to the Lyman series in the hydrogen spectrum.
learn more about shortest wavelength here:
https://brainly.com/question/21676157
#SPJ4
etermine whether each of the molecules below is polar or nonpolar. linear c o 2 c o 2 choose... tetrahedral c h 4 c h 4 choose... linear n 2 n 2 choose... bent h 2 o h 2 o choose...
CO₂ is nonpolar molecule, CH₄ is a nonpolar molecule, N₂ is a nonpolar molecule, and H₂O is a polar molecule.
What are Polar and non-polar molecules?Non polar molecules are the molecules which are symmetric with no unshared electrons in the structure. Polar molecules are the asymmetric molecules, which are either containing lone pairs of electrons on a central atom or having atoms with different electronegativities bonded to each other.
The linear CO₂ molecule is polar molecule due to the difference in electronegativity between the Carbon and Oxygen atoms. The tetrahedral CH₄ molecule is nonpolar since all the atoms have the same electronegativities. The linear N₂ molecule is nonpolar since it has a symmetrical linear shape. Finally, the bent H₂O molecule is polar due to the difference in electronegativity between the Hydrogen and Oxygen atoms.
Learn more about Molecules here:
https://brainly.com/question/15173422
#SPJ11
For the reactionA(g) ? 2B(g), a reaction vessel initially contains only A at a pressure of PA=1.19 atm . At equilibrium, PA =0.20 atm . Calculate the value of Kp. (Assume no changes in volume or temperature.)
The value of Kp for the reaction with equilibrium pressure of A is given as PA = 0.20 atm and the initial pressure of A is 0.0190.
What is Kp?To find the value of Kp for the reaction, we will use the expression for the equilibrium constant in terms of the partial pressures of the reactants and the products.
Kp = (PB)²/PA
where, PB is the equilibrium pressure of B.
Initially, there is no B in the reaction vessel, so the change in pressure of B is equal to its equilibrium pressure. Using the law of conservation of mass, we can write:
PV = nRT
where, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Since there is no change in volume or temperature, we can write:
PV = constant or P₁V₁ = P₂V₂
where, P₁ and P₂ are the initial and equilibrium pressures of A, respectively. Since A is the only gas initially present in the reaction vessel, we can write:
P₁ = PA = 1.19 atm, P₂ = 0.20 atm V₁ = V₂
Therefore, P₁V₁ = P₂V₂ = PAV₁ = PBV₂
Since, the number of moles of A and B are related by the balanced chemical equation, we can write:
2(PB) = nB
Substituting, PB in terms of PA and V1, we get:
Kp = (PB)²/PA = (nB/2V₂)²/PA
Kp= (nB/2PAV₁)²/PA= (nB)²/(4P²AV₁)
where, nB is the number of moles of B.
To find the number of moles of B, we use the balanced chemical equation. 2 moles of B are produced for every mole of A that reacts. Since, the initial pressure of A was 1.19 atm and the equilibrium pressure of A was 0.20 atm, 0.99 atm of A has reacted.
Therefore, the number of moles of A that has reacted is:
nB = (0.99/1.19) = 0.8327 mol
The total number of moles of the system is the sum of the moles of A and B initially present in the reaction vessel.
nTotal = nA + nB
Initially, only A is present, so nTotal = nA = 1 mol. The number of moles of B is therefore:
nB = nTotal - nA = 1 - 0.8327 = 0.1673 mol
Substituting the values of PA, nB, and V1, we get:
Kp = (nB)²/(4P²AV1) = (0.1673)²/(4 × 1.19² × 1) = 0.0190
Therefore, the value of Kp for the reaction is 0.0190.
Learn more about Kp here:
https://brainly.com/question/30550192
#SPJ11