The first structure, is the alkane with 7 carbons and two isopropyls groups aside (structure name, 3,4 - diisopropylheptane) and the second below that, would be the one with seven carbons including the isopropyl group counting.
An alkane is a hydrocarbon with the general formula CnH2n+2, where n is the number of carbon atoms. They are also known as saturated hydrocarbons because they contain only single bonds between carbon atoms, and are typically composed of a chain of carbon atoms with hydrogen atoms bonded to them. Alkanes are relatively unreactive, and are found in many natural gases and crude oils.An isopropyl group is a functional group with the molecular formula C3H7. It is an alkyl group derived from propane, and is composed of three carbon atoms and seven hydrogen atoms.
Learn more about alkane here:
https://brainly.com/question/4260635
#SPJ4
The process by which solute dissolves in solvent is typically a chemical change: Determine whether this statement is true or falsel True False
Yes, it is adjust since when salute may be a break up when salute is broken down into the dissolvable, then it'll frame the arrangement, at that point it'll frame the arrangement. So it has changed the chemical property.
May be a solute dissolving in a dissolvable a chemical change?The dissolution of a solute in a dissolvable to create a arrangement does not include a chemical change (that it could be a physical alter). Disintegration of a solute in a dissolvable to create a arrangement does not include a chemical change.
What is the method of dissolving solute to the solvent?Solvation, or disintegration, is the method by which a solute breaks up into a dissolvable.
To learn more about chemical property here:
https://brainly.com/question/1935242
#SPJ4
2. In step 1 of the procedure we will use 10 mL of cold water (20 °C) to dissolve the salt. Will any benzoic acid dissolve in this water? How can this be detected with litmus paper?
Answer:
Explanation:
Benzoic acid is a weak acid and is slightly soluble in water. It will dissolve in cold water to a certain extent, but not completely. This can be detected by using litmus paper. Blue litmus paper will turn red when it comes into contact with an acidic solution, indicating the presence of benzoic acid. Therefore, it can be detected that benzoic acid will dissolve in cold water to a certain extent but not completely.
for the following pair of ions give the chemical formula and the chemical name of the salt formed.
Mg2+
NO2-
For Mg²⁺ chemical formula and the chemical name of the salt formed is Mg²⁺ + SO₄⁻ → MgSO₄ (Magnesium sulfate)
For NO₂⁻ chemical formula and the chemical name of the salt formed is K⁺ + NO₂⁻ → KNO₂ (Potassium nitrite).
What is a fundamental chemical formula?The number of atoms in each element in a compound is revealed by the chemical formula. It includes the symbols for the atoms of each element found in the compound as well as a count of how many of each element there are overall in the form of subscripts.
Empirical, molecular, and structural formulas are the three categories of chemical formulas. The amount of each type of atom in a molecule is shown by its molecular formula, whereas the simplest whole-number relationship between the atoms in a compound is shown by its structural formula. The most straightforward whole-number relationship between the atoms in a compound is shown by empirical formulas.
To know more about chemical formula visit:
https://brainly.com/question/29031056
#SPJ4
Match The Missing Symbol, Name, Or Unit To The Variables In The Beer-Lambert Law.
According to the Beer-Lambert rule, a solution's concentration and absorbance have a linear relationship, allowing for solution concentration.
What is the basic Beer-Lambert law?Beer's Law (Beer-Lambert Law) A solution's molar absorptivity and solute concentration both affect how much energy is absorbed or transmitted by the solution. A more concentrated solution absorbs more light than a more diluted one, to put it simply.
What distinguishes Beer's law from Lambert law?While Lambert's law claims that the absorbance and route length are directly related, Beer's law states that the amount of light absorbed is proportional to the solution concentration.
Beer Lambert law,
equation, A= ∈bc
symbol name units
A absorbance no units
∈ molar absorbtivity L/mol.cm
b path length cm
c concentration mol/L
To know more about Beer-Lambert law visit:
https://brainly.com/question/29434481
#SPJ4
Indicate which orbitals overlap to form the σ bonds in the following molecules.
HgCl2
a.The two sigma bonds form between an s orbital on Hg and a hybrid sp orbital on Cl.
b.The two sigma bonds form between a hybrid sp2 orbital on Hg and a p orbital on Cl.
c.The two sigma bonds form between a hybrid sp3 orbital on Hg and a p orbital on Cl.
d.The two sigma bonds form between a hybrid sp orbital on Hg and a p orbital on Cl.
option d The two sigma bonds form between a hybrid sp orbital on Hg and a p orbital on Cl indicates the orbitals which overlap to form the σ bonds in the following molecules. HgCl2
Sigma bonds are the most powerful type of chemical bond. They are established by atomic orbitals overlapping head-on. For diatomic molecules, sigma bonding is most simply defined to use the language and techniques of symmetry groups. When one s and one p orbital within the same main atom's outer shell combine to form two new equivalent orbitals, this is made reference to as sp hybridization. The recently created orbitals are recognised as sp hybridised orbitals. It produces linear molecules with a 180° angle.
Learn more about sp hybridization here:
https://brainly.com/question/13978941
#SPJ4
Many hydrocarbons are:
sugars.
lipids.
common fuels.
plants.
To solve this we must be knowing each and every concept related to hydrocarbon. Therefore, the correct option is option A among all the given options.
What is hydrocarbon?Since they are the most basic organic molecules, hydrocarbons are extensively researched in organic chemistry. They are organic compounds that simply include carbon and hydrogen atoms.
Methane and propane are examples of gaseous hydrocarbons, hexane and benzene are examples of liquid hydrocarbons, paraffin wax or naphthalene are examples of low melting point solids or waxes, while polymeric chain of hydrocarbons including polystyrene, polypropylene, and polyethylene. Many hydrocarbons are sugars.
Therefore, the correct option is option A.
To know more about hydrocarbon, here:
https://brainly.com/question/28482314
#SPJ1
Which of the following solvents would be good to use for 1H NMR analyses? A. chloroform-d B. dimethyl sulfoxide C. acetone D. deuterium oxide E. acetone-d6.
Options (c), (d), and (e) are correct. The solvent that can be used for proton NMR analyses would be chloroform-d, acetone-d6, and deuterium oxide. This is because all the above solvents are deuterated.
What is 1H NMR analyses?The use of nuclear magnetic resonance in NMR spectroscopy with respect to hydrogen-1 nuclei within a substance's molecules in order to ascertain the structure of its molecules is known as proton nuclear magnetic resonance (proton NMR, hydrogen-1 NMR, or 1H NMR). In terms of NMR interpretation, it is crucial to comprehend the chemical shift trend. Nearness to electronegative atoms (O, N, halogen) and unsaturated groups (C=C, C=O, aromatic) affects the proton NMR chemical shift. Moving to the down field are electronegative groupings (left; increase in ppm).Alternatives (c), (d), and (e) are accurate. Chloroform-d, acetone-d6, and deuterium oxide are suitable solvents for proton NMR studies. Because all of the aforementioned solvents are deuterated, this is.To learn more about 1H NMR analyses refer to:
https://brainly.com/question/16202418
#SPJ4
determine the number of electrons lost or gained when each atom forms an ion.
Be: Loses 2 electrons, Se: Gains 2 electrons, I: Gains 1 electron, As: Gains 3 electrons.
The electron, a subatomic particle, has a negative fundamental electric charge. Electrons, the first generation of the lepton particle family, are often regarded as elementary particles due to their lack of known components or substructure. The mass of a proton is roughly equivalent to that of an electron. One of the quantum mechanical characteristics of the electron is its intrinsic angular momentum (spin), which is measured in terms of the reduced Planck constant. Because electrons are fermions, the Pauli exclusion principle asserts that no two of them may be in the same quantum state. Electrons have features in common with all elementary particles, including the ability to collide with other particles and experience optical diffractive effects. The wave properties of electrons are easier to observe experimentally than those of neutrons and protons because they have a smaller mass and a longer de Broglie wavelength for a given energy than these other particles do. Along with many other scientific phenomena including electricity, magnetism, chemistry, and thermal conductivity, electrons are involved in gravitational, electromagnetic, and weak interactions.
Learn more about electrons here
https://brainly.com/question/371590
#SPJ4
Would you expect MnO4-(aq) to react with NaI in acidic or in a basic solution?
MnO4-(aq) would react with NaI in a basic solution. In an acidic solution, MnO4-(aq) will not react with NaI.
What is acidic and basic solution?Acidic solution has a higher concentration of hydrogen ions, greater than that of pure water. Basic solution has a low H +, less than that of pure water.
The pH scale is used to indicate how acidic or basic solution is. It ranges from 0 to 14, where 7 is taken neutral. Anything less than 7 is classified as acid and above 7 is classified as base. pH scale is a logarithmic scale in which a substance with pH of 2 is 10 times more acidic than pH of 3.
To know more about acidic and basic solution, refer
https://brainly.com/question/27915098
#SPJ4
What is the purpose of cell respiration?
to breath in food
to expel unwanted oxygen
to produce energy from food
Answer:
To produce energy from food
Explanation:
It's pretty much an energy cycle
Convert the 3.40 x 1022 formula units of table salt, NaCl, to its mass in grams.
The 3.40 x 1022 formula units of table salt, NaCl, by converting is 6 grams.
What is the solution ?The term solution is defined as the homogenous mixture of the solute and solvent.
In step 1
It is known that a value of "x" % (m/m) means:
"x" grams in 100 grams of solution
In step 2
Given
3.40 x 10²² formula units of table salt
NaCl mass in grams ?
In step 3
Now,
58.44g NaCl ------------ 100 g of solution
3.40 NaCl ------------- X
X = 3.40 NaCl x 100 g of solution/58.44 g NaCl
X = 5.81 g
= 6g approx.
Thus, The 3.40 x 1022 formula units of table salt, NaCl, by converting is 6 grams.
To learn more about the solution, follow the link;
https://brainly.com/question/1616939
#SPJ1
draw the structure of the product of the enamine formed between cyclohexanone and morpholine.
Cyclohexanone (also known as oxocyclohexane, pimelic ketone, ketohexamethylene, cyclohexyl ketone or ketocyclohexane) is a six-carbon cyclic molecule with a ketone functional group.
What is the common name for cyclohexanone?The liquid cyclohexanone has a nice smell and is colourless to pale yellow in appearance. not as dense as water. 111 °F flash point. heavier than air vapours. utilised as a solvent, a chemical reaction media, and to produce nylon. A cyclic ketone called cyclohexanone is made up of cyclohexane with a single oxo group.
It serves as a xenobiotic metabolite for humans. Cyclohexanone is a six-carbon cyclic molecule having a ketone functional group. It is also known as oxocyclohexane, pimelic ketone, ketohexamethylene, cyclohexyl ketone, or ketocyclohexane.
It has an acetone-like scent and is an oily, colourless liquid. In heating systems, conductive liquids like boiler water and heat transfer fluids like morpholin are stabilised by morpholin. As a base that neutralises acid pollution in heat, morpholine serves as one of the main mechanisms by which it accomplishes this.
To learn more about cyclohexanone refer to:
https://brainly.com/question/28163979
#SPJ4
The following is part of a molecular orbital energy-level diagram for MOs constructed from 1s atomic orbitals. For which of the following molecules or ions could this be the energy-level diagram: Check all that apply. H2 He2 H^+2 He^+2 H^-2
According to the theory behind molecular orbitals, molecule orbitals are created by combining atomic orbitals with similar energies and symmetry. Combining atomic and molecular orbitals equals the number of orbitals in an atom.
What is meant by molecular orbital energy-level?Atomic and molecular orbitals resemble one other greatly: They are filled in order of lowest to maximum energy (Aufbau principle). They can hold up to two electrons with opposing spins in each orbital (Pauli exclusion principle). Similar to how electrons in an atom are filled in an energy state known as atomic orbitals, molecules have new energy states called molecular orbitals that house their electrons. The molecular orbital predicts the likelihood that an electronic distribution would be found around a collection of nuclei in a molecule. The number of manufactured molecular orbitals is equal to the number of atomic orbitals that were employed to produce them.In[tex]$\mathrm{H}_2^{-}$[/tex]each hydrogen atom contains one electrons and one electron is counted from negative charge, thus total number of electrons present in [tex]$\mathrm{H}_2^{-}$[/tex]is 3. The bonding molecular orbital consists of two electrons, while in antibonding molecular orbital, one electron is present.
The bond order of molecules is calculated by respective formula:-
Bond order [tex]$=\frac{1}{2}\left[\mathrm{~N}_{\mathrm{B}}-\mathrm{N}_{\mathrm{A}}\right]$[/tex]
Where,
[tex]- $\mathrm{N}_{\mathrm{B}}=$[/tex] Number of electrons present in bonding molecular orbital.
Bond order of [tex]f $\mathrm{H}_2^{-}=\frac{1}{2}\left[\begin{array}{ll}2 & -1\end{array}\right]$[/tex]
Bond order of [tex]$\mathrm{H}_2^{-}=\frac{1}{2}$[/tex]
Bond order of[tex]$\mathrm{H}_2^{-}=0.5$[/tex]
[tex]- $\mathrm{N}_{\mathrm{A}}=$[/tex] Number of electrons present in anti-bonding orbital.
The molecular orbital diagram [tex]$\mathrm{H}_2^{-}$[/tex] is shown below-
When light is used to treat [tex]$\mathrm{H}_2^{-}$[/tex], the electron in the bonding molecular orbital becomes excited and travels toward the antibonding molecular orbital. As a result, one electron is present in the bonding molecular orbital and two electrons are present in the antibonding molecular orbital following electron excitation. This is not stable since the bond order is negative.H 2's molecular orbital diagram when light is present,
Bondorderof [tex]$\mathrm{H}_2^{-}=\frac{1}{2}\left[\begin{array}{ll}1 & -2\end{array}\right]$[/tex]
Bondorderof [tex]$\mathrm{H}_2^{-}=\frac{-1}{2}$[/tex]
Bondorderof [tex]$\mathrm{H}_2^{-}=-0.5$[/tex]
Since the value of bond order is negative, the [tex]$\mathrm{H}_2^{-}$[/tex]ion is not stable in the presence of light.
The complete question is,
Sketch the molecular orbitals of the[tex]$\mathrm{H}_2{ }^{-}$[/tex]ion and draw its energy level diagram. Suppose that the ion is excited by light, so that an electron moves from a lower-energy to a higher-energy molecular orbital. Would you expect the excited-state [tex]$\mathrm{H}_2{ }^{-}$[/tex]ion to be stable?
To learn more about molecular orbital energy-level refer to:
https://brainly.com/question/15166216
#SPJ4
Calcium nitrate- make an evidence based argument for why acid rain would cause the calcium carbonate in the marble to slowly break down and wash away over time when calcium nitrate is produced
Following are the effects of acid rain.
What is Acid Rain?
Acid rain is caused by the accumulation of nitric and sulfuric acids in the atmosphere. These compounds are strong acids and are very soluble in water, dissolving in droplets in clouds.
Limestone effect:
Calcium carbonate, [Ca][CO3], is a very common mineral. A limestone is a well-known form of calcium carbonate. The acid contained in acid rain reacts with carbonate ions and promotes the dissolution of calcium carbonate.
This will create a bicarbonate solution. The presence of limestone and other calcium carbonates in lakes and streams helps maintain a constant pH as the mineral reacts with excess acidity. However, acid rain can eventually exceed the buffering capacity of surface waters.
How does acid rain affect buildings made of marble and limestone?
It is mainly affected in 2 ways: dissolution and alteration. Calcite dissolves when sulfuric, sulfuric and nitric acids in polluted air react with calcite in marble and limestone. Exposed areas of buildings and statues show rough surfaces, worn materials, and loss of sculptural detail. Stoneface material can be lost anywhere or only in more reactive areas.
Hence, this is how acid rain affects.
To learn more about Acid Rain, click on the given link: https://brainly.com/question/718250
#SPJ1
Write the balanced nuclear equation for the formation of 203 83 Bi through a decay.
The balanced nuclear equation for the formation of ²⁰³Bi (83) through a decay is ²⁰⁷At(87) → ²⁰³Bi(83) + ⁴He(2)(alpha)
What exactly is a nuclear equation?In nuclear fusion, nuclear fission, and radioactive decay, the reactants and products are represented by nuclear equations. Nuclear reactions show the conservation of atomic mass and proton number rather than the different number of elements as in chemical equations.
Nuclear reactions can be divided into three categories:
Nuclear fusion is the joining of two tiny atomic nuclei to form a single larger nucleus.
Nuclear fission is the division of an enormous atomic nucleus into smaller pieces.
The transformation of a less stable nucleus into a more stable nucleus is known as radioactive decay.
²⁰⁷At(87) → ²⁰³Bi(83) + ⁴He(2)( alpha )
final product mass = 243-4-0-4 = 235
final product atomic number = 95-2+1-2 = 92
hence final product 235U(92)Â.
To know more about nuclear equation visit:
https://brainly.com/question/19752321
#SPJ4
What is the range of
the data?
Experimenter 1
Trial #
1
2
3
Average
Length (cm)
8.4
8.2
8.5
8.37
A. The range is 8.37 cm
B. The range is 25.1 cm.
C. The range is 0.13 cm
D. The range is 0.30 cm
The range of the set of data given in the question above is 0.30 cm (Option D)
How do I determine the range of the data?From the basic knowledge of statistics, we understood that the range of a given data is defined as the difference between the highest value and the lowest value in the data. This is written as follow:
Range = Highest value - lowest value
With the above formula, we can obtain the range of the data given in the question. Details below:
Trail 1 has length of 8.4 cmTrial 2 has length of 8.2 cmTrial 3 has length of 8.5 cmHighest length = 8.5 cmLowest length = 8.2 cmRange =?Range = Highest length - lowest length
Range = 8.5 - 8.2
Range = 0.30 cm
Thus, the range is 0.30 cm (Option D)
Learn more about range:
https://brainly.com/question/20607770
#SPJ1
Adhesión refers to water ability to
Water molecules' propensity to attract other substances is known as adhesion.
What does water adhesion mean?Water molecules' interactions with one another are characterized by two qualities called cohesion and adhesion. and the interactions between water molecules and other things like leaves or even you. Cohesion is the tendency of water to adhere to itself. and adhesion denotes the propensity of water to adhere to other objects.
Why does adhesion force exist?Electrostatic or mechanical forces between two different types of material produce adhesion. Van der Waals forces and hydrogen bonding both contribute to cohesion.
Why does adhesion happen?Ionic, covalent, or hydrogen bonds are formed between the surface atoms of two distinct surfaces when there is chemical adhesion. In this way, chemical adhesion follows a pretty simple engineering principle: if surface molecules can link, then a network of these bonds will bind the surfaces together.
To know more about Adhesion visit:
https://brainly.com/question/1213688
#SPJ1
What you observe when bromine is added into pottasium iodide solution
The final observation is that Iodine is deep-brown in color and is formed from a Single-Displacement reaction.
The substitution reaction is another name for the single displacement reaction. To create a new chemical compound in this reaction, one atom or molecule displaces or replaces the other atom or molecule.
Colorless metal halides are created when metals and halogens combine.
During an experiment, potassium iodide solution was mixed with bromine water.
Once bromine water is added to a potassium iodide solution, hydrobromic acid is generated as a result of the oxidation to iodate, which is characterized by a steep rise in conductivity and a reduction in pH.
After the test, it was observed that the potassium iodide solution, which had previously been colorless or clear, the solution's color changes to a shade of brown, which is the color of iodine.
Learn more about Single displacement reaction at
brainly.com/question/29307794
Answer: When bromine is added to potassium iodide solution, a slight change in the color of brown can be observed.
Explanation: Bromine is a powerful oxidizing agent and a displacement reaction of halogens occurs when it is added to potassium iodide. Ultimately, a reddish-brown solution appears.
For balanced equation between bromine and potassium iodide solution,
https://brainly.com/question/27956587
complete each of the following equations regarding diffusion of two gases, a and b.
Diffusion is the spontaneous movement, equations regarding diffusion of two gases, a and b like a into b or b into a or a and b into a container are as follows:-
1. Diffusion of gas a into gas b:
a (gas) → b (gas)
2. Diffusion of gas b into gas a:
b (gas) → a (gas)
3. Diffusion of gas a and gas b into a container with a partition:
a (gas) + b (gas) → a (gas) + b (gas) (on opposite sides of partition)
4. Diffusion of gas a and gas b through a membrane:
a (gas) + b (gas) → a (gas) + b (gas) (on opposite sides of the membrane)
5. Diffusion of gas a and gas b into a container without a partition:
a (gas) + b (gas) → mixture of a and b (gas)
It's worth noting that diffusion is the spontaneous movement of particles from an area of higher concentration to an area of lower concentration until equilibrium is reached.
To know more about Diffusion please refer: https://brainly.com/question/23804077
#SPJ4
Question - complete each of the following equations regarding diffusion of two gases, a and b.
1. Diffusion of gas a into gas b
2. Diffusion of gas b into gas a
3. Diffusion of gas a and gas b into a container with a partition.
4. Diffusion of gas a and gas b through a membrane.
5. Diffusion of gas a and gas b into a container without a partition:
Q3 Compare the pH of the milk sample and the pH at which the casein solid forms. Q4 How does a change in pH affect the structural levels of a protein?
Milk — pasteurized, canned, or dry — is an acid-forming food. Its pH level is below neutral at about 6.7 to 6.9. This is because it contains lactic acid.
What is the pH of the milk?However, keep in mind that more essential than the precise pH level is whether it is acid-forming or alkaline-forming. Additionally acid-forming dairy products include butter, hard cheeses, cottage cheese, and ice cream. Despite having low pH values between 4.4 and 4.8, yoghurt and buttermilk are foods that contribute to alkalinity.
Raw milk is another exception, according to the American College of Healthcare Sciences, as it may generate an alkaline environment. However, drinking untreated milk might not be a good idea.
The taste of milk is not acidic. It's even suggested as a treatment for heartburn or acid reflux. Milk might provide symptom relief momentarily. This is so that the oesophagus and stomach can be protected by the fat in milk.
Milk consumption, however, could exacerbate heartburn symptoms. Milk increases stomach production.
To learn more about pH of the milk refer to:
https://brainly.com/question/19614052
#SPJ4
3. A certain atom in the 2nd period has an unusually high 3rd ionization energy. Name this
element. Draw a Bohr diagram and use it to illustrate why you were able to identify this
atom.
Answer:
he element is Neon (Ne).
Neon's unusually high third ionization energy is due to its stable electron configuration. On a Bohr diagram, Neon has two electrons in the 1s orbital, eight electrons in the 2s and 2p orbitals, and two electrons in the 3s orbital, giving it a complete shell of eight electrons (a stable configuration). This means that it takes more energy to first remove an electron from the third orbital, accounting for its unusually high 3rd ionization energy.
Neon (Ne), which is in the second period and possesses an incredibly high third ionization energy, is the element.
What is neon?The persistent electron structure of neon contributes to its very high third ionization energy. Neon has two electrons in the 1s orbital, eight electrons in the 2s and 2p orbitals, two electrons in the 3s orbital, and a total of eight electrons in the entire eight-element shell on a Bohr diagram (a stable configuration).
As a result, the explanation for the exceptionally high third ionization energy is that it requires more energy to first remove an electron from the third orbital.
Chemically speaking, neon is an element with the symbol Ne and atomic number 10. Noble gas describes it. Under normal circumstances, neon is a colorless, odorless, inactive monatomic gas, with roughly two-thirds of its mass.
For more information on neon kindly visit to
https://brainly.com/question/8226528
#SPJ1
Use kinetic molecular theory to describe the changes in temperature, particle motion, and kinetic energy when thermal energy is added to solid chocolate. Be sure to explain the process by describing how the particles in chocolate move relative to each other in both the solid and liquid state, as well as what happens during the phase change. Then describe the changes in particle motion, temperature, and kinetic energy when liquid chocolate is poured into a mold.
Matter is said to be made up of particles that are constantly moving. All particles have energy, but the energy has a variation depending on the temperature the sample of matter is in.
What is kinetic energy?The kinetic energy of an object is the energy that it possesses due to its motion and is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity.
All particles have energy and in turn the phenomena determines whether the substance exists in the solid, liquid, or gaseous state. Molecules in the solid phase have the least amount of energy, while gas particles have the greatest amount of energy.
The temperature of a substance is a measure of the average kinetic energy of the particles.
With respect to the changes in particle motion, temperature, and kinetic energy when liquid chocolate is poured into a mold, we can say that a change in phase may occur when the energy of the particles is changed.
There are spaces between particles of matter of the chocolate. The average amount of empty space between the molecules gets progressively larger as the sample of matter moves from the solid to the liquid and gas phases. There are attractive forces between the chocolate molecules, and these become stronger as the particles move closer together.
In conclusion, the attractive forces are called intermolecular forces.
Learn more about kinetic energy at: https://brainly.com/question/20658056
#SPJ1
The chemical formula of ethanol is C₂H5OH. How many atoms are in 1.73 mol of ethanol?
The chemical formula of ethanol is C₂H5OH. So according to the question, the number of carbon atoms, it will be twice the number of molecules, So it will be two times 7.65 Times 10 to about 23.
How dangerous is ethanol?Intoxication with ethanol is frequent in older adolescents and adults. A child's toxic dose is 3 mg/dL, whereas an adult's hazardous dose is 5 mg/dL. Compared to adults, children are more likely to experience hypoglycemia after a single intake.
Why is the boiling point of ethanol so low?The boiling point of ethanol is relatively low. Water has a greater boiling temperature than ethanol because there is less hydrogen bonding between water molecules than between ethanol molecules, which requires less energy to vaporize.
To learn more about ethanol visit:
https://brainly.com/question/20107991
#SPJ1
Compared to an uncatalyzed reaction, an enzyme-catalyzed reaction produces different products requires a higher temperature occurs at a faster rate: uses less substrate: requires more energy:
An enzyme-catalyzed reaction proceeds more quickly than an uncatalyzed reaction. The right answer is c).
Enzymes: What are they?Proteins called enzymes aid in increasing our bodies' chemical reactions, or metabolism. Whereas other enzymes are broken down, others are produced. A component of all living creatures is an enzyme. Enzymes are created by our bodies spontaneously. Enzymes are, however, found in both food & manufactured goods.
How do enzymes function?The vital function of enzymes is to reduce the activation energy of a reaction, or the amount of electricity needed for the process to start. Enzymes bind to host molecules to hold them together to aid in the formation and breaking of chemical bonds.
To know more about Enzymes visit :
https://brainly.com/question/28012827
#SPJ4
The Complete Question :
Compared to an uncatalyzed reaction, an enzyme-catalyzed reaction
a) produces different products
b) requires a higher temperature
c) occurs at a faster rate
d) uses less substrate
e) requires more energy
Convert 29.9 L/cm to units of milliliters per meter. Show the unit analysis.
Answer:
299 mL/m
Explanation:
[tex](\frac{29.9L}{1 cm})(\frac{1000mL}{1L})(\frac{1 cm}{100 m}) = \frac{(29.9)(1000mL)}{100 m} = 299 mL/m[/tex]
Compound A gives the product(s) below on oxidative cleavage with KMnO44 in acidic solution.
Propose a structure for A.
Compound A →CH3CH2CCH2CH2CH2CH2CO2H
Making Carboxylic Acids by Oxidation of Essential Alcohols or Aldehydes. Essential alcohols and aldehydes are regularly oxidized to carboxylic acids utilizing potassium dichromate(VI) arrangement within the nearness of weaken sulfuric corrosive.
Can alcohols be oxidized to carboxylic acid?Primary alcohols can be oxidized to make aldehydes and carboxylic acids; auxiliary alcohols can be oxidized to donate ketones.
What is the response from liquor to carboxylic corrosive called?The response of an liquor with carboxylic corrosive is called esterification.
Can ethanol be oxidized to a carboxylic acid?Ethanol Oxidation Product At this point, we know that ethanol will experience an oxidation response with chromic corrosive acting as the oxidizing specialist to donate a carboxylic corrosive as the item.
To learn more about carboxylic acids here:
https://brainly.com/question/4721247
#SPJ4
a sample of n2(g) effuses through a tiny hole in 38 s. What must be the molar mass of a gas that requires 64 s to effuse under identical conditions?
Therefore, 450.56 g/mol is the molar mass of the unidentified gas.
Which gases will quickly effuse via a tiny hole?The average kinetic energy of all gaseous molecules is equal at a given temperature. The lowest mass of these gases, hydrogen gas, will have the highest average velocity. As a result, it will escape the small opening more quickly than the other gases.
The rate of diffusion is the change in molecules that diffuse over time. Inverse to the square root of the volume is the diffusion rate of a gas (density). The formula for rate of diffusion is hence rate of diffusion 1density.
Learn more about rate of diffusion refer
https://brainly.com/question/29064792
#SPJ1
draw a structure, with a formula of c4h10o, which has an integration of 6h, 2h, 1h, and 1h.
Hydrocarbons 6H, 2H, 1H, and 1H are all present as constituents of the molecule C4H10O.
What does a double bond equate to using an example?The double bond equivalent, to put it simply, is the ratio of the number of double bonds and triple bonds present in organic compounds. Consider the case of benzene, which has four double bonds, or three double bonds and one ring.
a type of chemical connection when two atoms within the same molecule share two pairs of electrons (see single bond, triple bond).
We must first determine the double bond equivalent, which is equal to C – H/2 + 1.
To C4H10O
Double-bond equivalent: 4 - 10/2 + 1
equivalent of a double bond is zero
Both rings and the double bond don't exist.
So it is an aliphatic molecule with four different proton kinds.
The compound given is attached below with its structure.
To learn more about hydrocarbons refer to:
https://brainly.com/question/21281906
#SPJ4
draw the structure of the product of the enamine formed between acetophenone and pyrrolidine.
The product of the enamine formed between acetophenone and dimethyl pyrrolidine, as a nucleophile, dimethyl pyrrolidine attacks the carbonyl in this situation to produce the enamine.
How enamines are formed?Secondary amines react with carbonyl compounds to produce enamines as a byproduct. The secondary amines pyrrolidine, piperidine, and morpholine are frequently used to create enamines. Enamines act as nucleophiles and cause an alkylation at a position corresponding to a carbon atom in the original carbonyl compound.
Due to the absence of the additional nitrogen atom required for imine formation, secondary amines form a distinctly different functional group following nucleophilic addition. A hydrogen atom is taken out of a carbon next to it during this reaction, creating a C=C bond.
Structure of the product of the enamine formed between acetophenone and pyrrolidine is attached below.
To know more about nucleophile visit:
https://brainly.com/question/28325919
#SPJ4
Draw Lewis symbols for the most stable ton formed by: sodium, oxygen, calcium, and chlorine.
The most stable form of sodium, oxygen, calcium, and chlorine is found in the Lewis structure.
What is electron?Lewis dot structures, sometimes called electron dot structures, are diagrams that depict the interatomic chemical bonds in a molecule. They also display the overall number of lone pairs that can be detected in every atom that makes up the molecule. Lewis structures, commonly referred to as electron dot structures or Lewis structures, are fairly common. According to Lewis, a base is an electron pair donor and an acid is an electron pair acceptor. A Lewis Electron Dot Formula contains one dot in addition to the element's symbol and each valence electron. The following is a list of the stages for explaining the electron dot formula. Make a skeletal structure that displays a realistic bonding pattern using only the elemental symbols.Lewis structures thus show the potential for bonding.
To learn more about electron, refer to:
https://brainly.com/question/25674345
#SPJ4