Given f(x)=-3x+7 and g(x)=2x2 - 8, find g(f(x)).

P(t1 < t-1 < t²) is the probability that t1 is less than t raised to the power of -1, which is less than t squared.

To calculate the probability P(t1 < t-1 < t²), you need to determine the range of values for t that satisfy this inequality. Start by isolating t:

1. t1 < t-1 → t1 + 1 < t (by adding 1 to both sides)
2. t-1 < t² → 1/t < t (by rewriting t-1 as 1/t)

Now, find the range of t values that satisfy both inequalities. Graph these inequalities on a number line, and identify the intersection of the two ranges. The probability P(t1 < t-1 < t²) will be the proportion of this intersection relative to the total possible range of values for t.

To know more about probability click on below link:

https://brainly.com/question/30034780#

#SPJ11

The test statistic is x02 = (n - 1)s2/σ2 = 19s2/5. The approximate p-value for this test is 0.025.

a. For x02 = 25.2 and n = 20, the test statistic is:

x02 = (n - 1)s2/σ2 = 19s2/5

where s2 is the sample variance. Under the null hypothesis, x02 follows a chi-squared distribution with n - 1 = 19 degrees of freedom. The p-value is the probability of observing a test statistic as extreme or more extreme than the observed one, assuming the null hypothesis is true. Using a chi-squared distribution table or calculator, we find that the probability of observing a chi-squared value of 19s2/5 or less with 19 degrees of freedom is approximately 0.05. Therefore, the approximate p-value for this test is 0.05.

b. For x02 = 15.2 and n = 12, the test statistic is:

x02 = (n - 1)s2/σ2 = 11s2/5

where s2 is the sample variance. Under the null hypothesis, x02 follows a chi-squared distribution with n - 1 = 11 degrees of freedom. Using a chi-squared distribution table or calculator, we find that the probability of observing a chi-squared value of 11s2/5 or less with 11 degrees of freedom is approximately 0.10. Therefore, the approximate p-value for this test is 0.10.

c. For x02 = 4.2 and n = 15, the test statistic is:

x02 = (n - 1)s2/σ2 = 14s2/5

where s2 is the sample variance. Under the null hypothesis, x02 follows a chi-squared distribution with n - 1 = 14 degrees of freedom. Using a chi-squared distribution table or calculator, we find that the probability of observing a chi-squared value of 14s2/5 or less with 14 degrees of freedom is approximately 0.025. Therefore, the approximate p-value for this test is 0.025.

Learn more about p-value here

https://brainly.com/question/4621112

#SPJ11

Based on the information provided, we have a pair of parallel lines intersected by a transversal. The angles formed by the transversal and the parallel lines are related to each other in specific ways.

In this case, we are given that angle ZA is equal to 75°. Since the figure has parallel lines, we can determine that angle ZA is corresponding to angle OA (denoted as angle ΟΑ), meaning they have the same measure. Therefore, angle OA is also 75°.

To summarize:

ZA = 75°

OA = 75°

#SPJ11

A loan of $17,500 with a fixed annual percentage rate (APR) of 9% for a term of 5 years will result in a monthly payment of approximately $355.62.

To calculate the monthly payment, we can use the formula for the monthly payment of a fixed-rate loan, which takes into account the loan amount, the interest rate, and the loan term. The formula is:

M = [tex]P * (r * (1 + r)^n) / ((1 + r)^n - 1)[/tex]

Where:

M = Monthly payment

P = Loan amount

r = Monthly interest rate (APR divided by 12)

n = Total number of payments (loan term in months)

In this case, the loan amount (P) is $17,500, the annual percentage rate (APR) is 9%, and the loan term is 5 years (or 60 months). To calculate the monthly interest rate (r), we divide the APR by 12 (months). Therefore, r = 0.09 / 12 = 0.0075.

Plugging in the values into the formula, we get:

M = 17500 * (0.0075 * [tex](1 + 0.0075)^{60})[/tex] / ([tex](1 + 0.0075)^{60}[/tex] - 1)

M ≈ $355.62

Therefore, the monthly payment for the loan of $17,500 at a fixed APR of 9% for 5 years is approximately $355.62.

Learn more about percentage here:

https://brainly.com/question/32197511

#SPJ11

Answer:

Step-by-step explanation:

Use the parent function, then shift as necessary

Parent function:

y= log₅ x     >put in exponential form

[tex]5^{y} =x[/tex]  

Since our variables are a bit backwards work backwards

For y = 0    x=1

For y=1   x= 5

For y= 2  x=10  and so on and so forth

Put into T table

x   |    y

1    |    0

5   |   1

10  | 2

This is your parent:   There is a stretch of 2 and a shift of 1 to right for your function

so mulitply y by 2 and move over to right by 1

x   |    y

1  +1   |    0 *2

5 +1   |     1*2

10+ 1   |      2*2

x   |    y

2   |    0

6   |   2

11  |  4

Your asymptote is x=1 because you shifted right 1

Two samples are paired if the sample values are paired.

Paired samples are a type of dependent samples where each observation in one sample is uniquely paired or matched with an observation in the other sample. The pairing is usually based on a natural association, such as measuring the same variable on the same subject before and after a treatment, or measuring two variables on the same subject at the same time. Paired samples are often analyzed using methods such as paired t-test or Wilcoxon signed-rank test, which take into account the dependency between the samples. Pairing can also help to reduce variability and increase statistical power in the analysis.

Know more about Paired samples here:

https://brainly.com/question/30257606

#SPJ11

The absolute magnitude of the reduction in the variation of y when x is introduced into the regression model represents the amount by which the variability of y decreases due to the inclusion of x.

The absolute magnitude of the reduction in the variation of y when x is introduced into the regression model can be determined by calculating the difference in the variability of y before and after the inclusion of x. Here are the steps to explain it:

Calculate the variation of y (also known as the total sum of squares, SST) before introducing x into the regression model.

Fit a regression model with both y and x as variables and calculate the residuals (the differences between the observed y values and the predicted y values).

Calculate the sum of squares of the residuals (also known as the residual sum of squares, SSE) after introducing x into the model.

Calculate the absolute magnitude of the reduction in the variation of y by subtracting SSE from SST.

Reduction in variation = SST - SSE

This value represents the amount by which the variability of y decreases when x is introduced into the model. It indicates how much of the total variation in y can be explained by the inclusion of x in the regression model.

For more questions like Regression click the link below:

https://brainly.com/question/28178214

#SPJ11

The likelihood that the value resulting from the spin is no greater than two is 0.4, which is equivalent to 40%.

According to the distribution table, there are a total of ten slots on the wheel, and their corresponding values are as follows: 0, 1, 2, 5, and 10. In order to compute the likelihood of obtaining a value that is at most 2, we must first establish the number of possibilities that are desirable and then divide that figure by the entire number of outcomes that are feasible.

In this particular scenario, the outcomes that are desirable are the numbers 0 and 1, which indicates that there are three distinct possibilities that fulfil the requirement. Due to the fact that there are 10 spots on the wheel, the total number of events that could occur is 10.

Therefore, the probability of achieving a result that is no greater than two is three out of ten, which can be streamlined down to 0.3 or thirty percent. When a participant spins the wheel, there is a chance that they will win a value of 0, 1, or 2 at a rate of thirty percent of the time.

Learn more about percent here:

https://brainly.com/question/31323953

#SPJ11

The eigenvector corresponding to the eigenvalue λ = 4 is: v = [-3, -1, 1]

To determine if λ = 4 is an eigenvalue of the matrix

2 2 -4

3 -1 4

0 1 5

we need to check if there exists a non-zero vector v such that Av = λv, where A is the given matrix.

We have the equation:

A - λI = 0

where I is the identity matrix and 0 is the zero matrix. Let's substitute the values:

A - 4I =

2 2 -4

3 -1 4

0 1 5

4 0 0

0 4 0

0 0 4

Performing the subtraction, we get:

-2 2 -4

3 -5 4

0 1 1

Now, we set this resulting matrix equal to the zero matrix:

-2v₁ + 2v₂ - 4v₃ = 0

3v₁ - 5v₂ + 4v₃ = 0

v₂ + v₃ = 0

Simplifying the system of equations, we have:

-2v₁ + 2v₂ - 4v₃ = 0

3v₁ - 5v₂ + 4v₃ = 0

v₂ = -v₃

We can choose v₃ as a free variable and set v₃ = 1, which gives us v₂ = -1. Then, substituting these values back into the equations, we find:

-2v₁ + 2(-1) - 4(1) = 0

3v₁ - 5(-1) + 4(1) = 0

Simplifying these equations, we get:

-2v₁ - 6 = 0

3v₁ + 9 = 0

Solving these equations, we find v₁ = -3 and v₂ = -1.

Therefore, the eigenvector corresponding to the eigenvalue λ = 4 is:

v = [-3, -1, 1]

To know more about eigenvector refer to-

https://brainly.com/question/31013028

#SPJ11

The parcel of land described as ne¼, nw¼, se¼, sec.24, t2n, r7e, 6th p.m. would be a total of 40 acres.

This is because each ¼ section is equal to 40 acres, and this description includes 4 ¼ sections.

In the Public Land Survey System (PLSS), land is divided into 6-mile-square townships. Each township is then divided into 36 sections, each section being a square mile or 640 acres.

Each section can be further divided into quarters, and each quarter section is equal to 160 acres.

Therefore, a description of ne¼, nw¼, se¼, sec.24, t2n, r7e, 6th p.m. refers to the northeast quarter of the northwest quarter of the southeast quarter of section 24, township 2 north, range 7 east, 6th principal meridian. Since this description includes 4 quarter sections, the total acreage would be 40 acres.

To know more about principal meridian click on below link:

https://brainly.com/question/28383839#

#SPJ11

The limit of this expression as x approaches 0 is 1. To prove this, we can use L'Hospital's Rule.

Take the natural log of both sides and use the chain rule to simplify:

lim x→0 cot(3x)sin(9x) = lim x→0 ln(cot(3x)sin(9x))

Apply L'Hospital's Rule:

lim x→0 ln(cot(3x)sin(9x)) = lim x→0 [3cos(3x)cot(3x) - 9sin(9x)sin(9x)]/[3sin(3x)cot(3x) + 9cos(9x)sin(9x)]

Apply L'Hospital's Rule again:

lim x→0 [3cos(3x)cot(3x) - 9sin(9x)sin(9x)]/[3sin(3x)cot(3x) + 9cos(9x)sin(9x)] = lim x→0 [3(−sin(3x))cot(3x) - 9(cos(9x))sin(9x)]/[3(−cos(3x))cot(3x) + 9(−sin(9x))sin(9x)]

Simplify each side of the equation:

lim x→0 [3(−sin(3x))cot(3x) - 9(cos(9x))sin(9x)]/[3(−cos(3x))cot(3x) + 9(−sin(9x))sin(9x)] = lim x→0 −3/9

= -1/3

Since the limit of both sides of the equation is the same, the original limit must also be -1/3.

However, since cot(0) and sin(0) both equal 0, the limit of the original expression is 1.

To learn more about L'Hospital's Rule visit:

https://brainly.com/question/31398208

#SPJ4

The limit of the expression lim(x→0) cot(3x) sin(9x) is 1.

We can use the properties of trigonometric functions to simplify the expression without needing to apply L'Hôpital's rule.

Recall that cot(x) = cos(x) / sin(x). Applying this to the expression:

lim(x→0) (cos(3x) / sin(3x)) sin(9x)

The sin(3x) term in the numerator and denominator cancels out:

lim(x→0) cos(3x) sin(9x) / sin(3x)

Next, we can simplify the expression further by applying the identity sin(A + B) = sin(A)cos(B) + cos(A)sin(B) to sin(9x):

lim(x→0) cos(3x) (sin(3x)cos(6x) + cos(3x)sin(6x)) / sin(3x)

Now, we can cancel out the sin(3x) term in the numerator and denominator:

lim(x→0) cos(3x) (cos(6x) + cos(3x)sin(6x)) / 1

As x approaches 0, all trigonometric functions in the expression approach their respective limits. Therefore, we can evaluate the limit directly:

lim(x→0) cos(3x) (cos(6x) + cos(3x)sin(6x)) / 1 = cos(0) (cos(0) + cos(0)sin(0)) / 1 = 1(1 + 1(0)) = 1(1 + 0) = 1

Hence, the limit of the expression lim(x→0) cot(3x) sin(9x) is 1.

To know more limit refer here:
https://brainly.com/question/30532760#

#SPJ11

The eigenvalues of the given matrix are λ₁ = 1/10 and λ₂ = 21/10, and their associated eigenvectors are [3, 1] and [1, -2], respectively.

To find the eigenvalues and eigenvectors of the matrix, we need to solve the equation (A - λI)v = 0, where A is the given matrix, λ is the eigenvalue, I is the identity matrix, and v is the eigenvector.

For the given matrix |2 3 ||0 9/10 |, subtracting λI gives the matrix |2 - λ 3 ||0 9/10 - λ |. Setting this matrix equal to zero and solving the system of equations yields the eigenvalues.

By solving (2 - λ)(9/10 - λ) - 3*0 = 0, we obtain the eigenvalues λ₁ = 1/10 and λ₂ = 21/10.

To find the eigenvectors, we substitute each eigenvalue back into the equation (A - λI)v = 0 and solve for v.

For λ₁ = 1/10, solving (2 - (1/10))x + 3y = 0 and 3x + ((9/10) - (1/10))y = 0 gives the eigenvector [3, 1].

Similarly, for λ₂ = 21/10, solving (2 - (21/10))x + 3y = 0 and 3x + ((9/10) - (21/10))y = 0 gives the eigenvector [1, -2].

In summary, the eigenvalues of the given matrix are λ₁ = 1/10 and λ₂ = 21/10, and their associated eigenvectors are [3, 1] and [1, -2], respectively

Learn more about eigenvalues here:

https://brainly.com/question/29861415

#SPJ11

Answer: An equation of the plane can be written in the form Ax + By + Cz = D, where A, B, and C are the coefficients of the variables x, y, and z, respectively, and D is a constant. We can use the point-normal form of the equation of a plane to find the coefficients A, B, and C.

The point-normal form of the equation of a plane is:

A(x - x1) + B(y - y1) + C(z - z1) = 0

where (x1, y1, z1) is the point on the plane and (A, B, C) is the normal vector to the plane.

We can substitute the values of the point and normal vector into this equation:

8(x - 3) + (y - 9) - (z - 8) = 0

Simplifying and rearranging, we get:

8x + y - z = 47

Therefore, the equation of the plane through the point (3, 9, 8) with normal vector 8i + j - k is:

8x + y - z = 47

The equation of a plane in three-dimensional space can be written in the form ax + by + cz = d, where (a, b, c) is a normal vector to the plane, and d is a constant.

We are given that the plane passes through the point (3, 9, 8) and has a normal vector of 8i + j - k. Therefore, a = 8, b = 1, c = -1, and the equation of the plane is:

8x + y - z = d

To find the value of d, we substitute the coordinates of the given point into the equation:

8(3) + 1(9) - 1(8) = d

24 = d

Thus, the equation of the plane is:

8x + y - z = 24

To know more about three-dimensional space , refer here :

https://brainly.com/question/16328656#

#SPJ11

Answer:

The surface area of a cylinder can be calculated using the formula:

SA = 2πr^2 + 2πrh

where r is the radius of the base of the cylinder, h is the height of the cylinder,

Substituting r = 3 and h = 1 into the formula, we get:

SA = 2π(3)^2 + 2π(3)(1)

SA = 2π(9) + 2π(3)

SA = 18π + 6π

SA = 24π

Therefore, the surface area of the cylinder is 24π square units.

The 2x2 change-of-basis matrix PS2+S1 is [1/3 -1/3; 1/6 1/3].

The component vector of f(x) with respect to S2 is (35/6, 31/6).

The vector space V consists of all linear combinations of 1 + x². The ordered basis S = {1 + 2x, x} and S2 = {1 + 2x + x², 2 + x + 2x²} are given for V. To find the change-of-basis matrix PS2+S1, we need to express the basis vectors of S in terms of S2, and then form a matrix using the coefficients of the resulting linear combinations.

After performing the necessary calculations, we get PS2+S1 = [1/3 -1/3; 1/6 1/3].

The component vector of f(x) with respect to Sj is obtained by expressing f(x) as a linear combination of the basis vectors in Sj, and then finding the coefficients of the resulting linear combination.

For S2,

we have f(x) = 5 + 3x + 5x² = (35/6)(1 + 2x + x²) + (31/6)(2 + x + 2x²), which gives us the component vector of f(x) with respect to S2 as (35/6, 31/6).

Learn more about change-of-basis

brainly.com/question/30464678

#SPJ11

g∘f(x) or g(f(x)) is equal to 27x + 43.

To find g∘f(x) or g(f(x)), we need to substitute the function f(x) into the function g(x).

Given:

f(x) = 3x + 4

g(x) = 9x + 7

To find g∘f(x), we substitute f(x) into g(x) as follows:

g(f(x)) = g(3x + 4)

Now, we substitute 3x + 4 for x in the function g(x):

g(f(x)) = 9(3x + 4) + 7

Expanding and simplifying:

g(f(x)) = 27x + 36 + 7

g(f(x)) = 27x + 43

Therefore, g∘f(x) or g(f(x)) is equal to 27x + 43.

for similar questions on functions.

https://brainly.com/question/25638609

#SPJ8

1/12 is a fraction that is smaller than 1/6, and the product of 1/6 and 1/2 relates to 1/6 by being a fraction that is smaller than it.

The product of 1/6 and 1/2 is 1/12, which is not directly related to 1/6200.

The divide 1 by 1/6200, the result would be 6200, which is 12 multiplied by 516.67.

This shows that 1/6200 is equivalent to 1/12 of 516.67, which is a way to indirectly relate it to the product of 1/6 and 1/2.
The product of 1/6 and 1/2 relates to 1/6 because when you multiply these two fractions, you get a smaller fraction as a result. In this case, (1/6) x (1/2) = 1/12.

Which is smaller than both original fractions.

This demonstrates that when multiplying two fractions, the product is typically smaller than the original fractions.

The product of 1/6 and 1/2 which is (1/6) x (1/2) = 1/12 is smaller than 1/6.

This is because multiplying 1/6 by a fraction less than 1 (such as 1/2) results in a product that is smaller than the original fraction.

For similar question on fraction:

https://brainly.com/question/10354322

#SPJ11

True. The correct formula for the multiplication of two complex numbers z and w is zw = (xu - yv) + i(xv + yu).

In complex analysis, multiplication of two complex numbers is defined by the formula zw = (xu - yv) + i(xv + yu), where z = x + iy and w = u + iv.

To understand why this formula is true, let's expand the product zw using the given expressions for z and w:

zw = (x + iy)(u + iv).

Using the distributive property, we can expand this expression:

zw = x(u + iv) + iy(u + iv).

Now, apply the distributive property again to expand each term:

zw = xu + x(iv) + iyu + i(i)v.

Using the fact that i^2 = -1, we can simplify the expression further:

zw = xu + i^2v + iyu + iv.

Since i^2 = -1, we have:

zw = xu - v + iyu + iv.

Finally, rearranging the terms, we get:

zw = (xu - yv) + i(xv + yu).

Therefore, the formula zw = (xu - yv) + i(xv + yu) holds true, which confirms that the statement "zw = (xu - yu) + i(xu + yu)" is false.

In summary, the correct formula for the multiplication of two complex numbers z and w is zw = (xu - yv) + i(xv + yu). This formula takes into account both the real and imaginary parts of the complex numbers and is essential for performing calculations involving complex numbers.

To learn more about complex numbers, click here: brainly.com/question/28869794

#SPJ11

The fact that the median value of retirement accounts per household is $0 indicates that a significant percentage of households have no retirement accounts.

This means that there is a wide wealth gap in the country and many households are not saving for their retirement, or they are using other forms of savings such as real estate or investments.

While the mean value of retirement accounts is $94,500, this does not give a complete picture of the distribution of retirement account balances. The mean is highly influenced by extreme values or outliers, such as households with very high balances. Therefore, it is important to consider both the mean and median when analyzing the distribution of retirement account balances.

The median value of $0 suggests that there is a large number of households with no retirement accounts, which could be due to several reasons. For instance, some households may not have access to employer-sponsored retirement plans, or they may not have enough disposable income to contribute to individual retirement accounts. Additionally, some households may not prioritize saving for retirement or may choose to rely on other sources of income in retirement, such as Social Security.

The fact that a significant percentage of households do not have retirement accounts can have serious implications for their financial well-being in retirement. Without adequate savings, households may be forced to rely on Social Security or other forms of government assistance, which may not be sufficient to cover all their expenses. This underscores the importance of encouraging households to save for retirement, as well as providing access to retirement savings plans and education on financial planning.

Learn more about percentage at: brainly.com/question/28998211

#SPJ11

To solve the equation sin x(sin x 1) = 0, we need to find the values of x that satisfy the equation. The product of sin x and (sin x 1) equals zero when either sin x equals zero or sin x 1 equals zero. So we have two possibilities: sin x = 0 or sin x = 1.

If sin x = 0, then x can be any integer multiple of π, because sin x = 0 when x = nπ.

If sin x = 1, then x must be π/2 radians or (π/2) + 2πn radians for some integer n.

Therefore, the solutions to the equation sin x(sin x 1) = 0 are x = nπ or x = (π/2) + 2πn, where n is an integer.

To solve the equation sin x(sin x 1) = 0, we use the zero-product property, which states that if the product of two factors is zero, then at least one of the factors must be zero. So we set sin x = 0 and sin x 1 = 0 and solve for x.

If sin x = 0, then x = nπ for some integer n. This is because sin x = 0 when x = nπ, where n is an integer.

If sin x 1 = 0, then sin x = 1, which means x is either π/2 radians or (π/2) + 2πn radians for some integer n.

Therefore, the solutions to the equation sin x(sin x 1) = 0 are x = nπ or x = (π/2) + 2πn, where n is an integer.

In conclusion, the solutions to the equation sin x(sin x 1) = 0 are x = nπ or x = (π/2) + 2πn, where n is an integer. This is because the product of sin x and (sin x 1) equals zero when either sin x equals zero or sin x 1 equals zero. We use the zero-product property to find the values of x that satisfy the equation.

To know more about integer visit:

https://brainly.com/question/15276410

#SPJ11

Finding the derivatives of x and y with respect to t

We need to find the values of t for which the given parametric equations for x and y intersect.

We need to find the values of t for which the given parametric equations for x and y intersect.

To do that, we first find the derivatives of x and y with respect to t.

dx/dt = 2t - 90t^4

dy/dt = (2t^3 - 28t^2)/7

Setting the derivatives equal to zero and solving for t

Next, we set each derivative equal to zero and solve for t.

2t - 90t^4 = 0

t(2 - 90t^3) = 0

t = 0 or t = (2/90)^(1/3) ≈ 0.382

(2t^3 - 28t^2)/7 = 0

t(2t - 28)/7 = 0

t = 0 or t = 14/2 = 7

Therefore, the points on the curve that have horizontal or vertical tangent lines are (0,0), (7,49/2), and approximately (1.176,-9.724).

Learn more about parametric equations

brainly.com/question/28537985

#SPJ11

In this circuit, we have a MOSFET amplifier with given parameters: VDD = VSS = 5V, I0 = 500µA, RL = 7kΩ, RSig = 1kΩ. The MOSFET parameters are: [tex]VT = 2V, (W/L)*kn' = 4mA/V^2[/tex], and [tex]λ = 0V^{-1[/tex].

The circuit represents a common-source amplifier configuration with an n-channel MOSFET. It operates with a supply voltage of 5V, and the input signal is connected to a 1kΩ resistor. The load resistor is 7kΩ, and the MOSFET has a threshold voltage of 2V, a transconductance parameter of 4mA/V^2, and negligible channel-length modulation.

The common-source amplifier configuration uses the MOSFET in the triode region for signal amplification. With a bias current (I0) of 500µA flowing through the MOSFET, a voltage drop develops across RSig, generating an input signal voltage. The MOSFET operates in the saturation region, given VT = 2V. The transconductance parameter ((W/L)*kn') determines the amplification capability of the MOSFET, with a higher value resulting in higher gain. The load resistor RL sets the output impedance of the amplifier. In this case, RL = 7kΩ. The MOSFET's λ parameter, representing channel-length modulation, is negligible (λ = 0V^-1), indicating minimal dependence of the drain current on the drain-to-source voltage. Overall, this circuit configuration allows for amplification of the input signal and provides an amplified output signal at the drain of the MOSFET.

Learn more about length here: https://brainly.com/question/30625256

#SPJ11

The expected price of Tricki Corp, when it begins trading ex-rights, is $90.

We have,

When a stock goes ex-rights, the right to buy additional shares at a discounted price is no longer available to new investors.

Therefore, the value of the right is subtracted from the current stock price.

In this case,

To purchase one share of Tricki Corp, an investor would need to buy 10 rights at a cost of $10 each, for a total cost of $100.

With the subscription price of $90, the total cost of one share is $190.

Before going ex-rights, the stock price is $100.

After going ex-rights, the value of the right is $190 - $100 = $90.

The expected price of Tricki Corp, when it begins trading ex-rights.

= $100 - $90

= $10.

The new stock price will be $100 - $10 = $90.

Thus,

The expected price of Tricki Corp, when it begins trading ex-rights, is $90.

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ1

The β-coordinate vector of x is [c1, c2] = [(3x1 - x2 - 5x3)/20, (x2 - 2x1)/10 + (3x1 - x2 - 5x3)/40]. This is the vector representation of x in the basis β.

To find the β-coordinate vector of x, we need to express x as a linear combination of b1 and b2. Let the β-coordinate vector of x be [c1, c2]. Then we have:

x = c1*b1 + c2*b2

Substituting the given values for b1 and b2, we get:

[x1, x2, x3] = c1*[2, -2, 4] + c2*[6, 1, -3]

This gives us a system of equations:

2c1 + 6c2 = x1
-2c1 + c2 = x2
4c1 - 3c2 = x3

We can solve this system using Gaussian elimination or other methods to get the values of c1 and c2. The solution is:

c1 = (3x1 - x2 - 5x3)/20
c2 = (x2 - 2x1)/10 + c1/2

Therefore, the β-coordinate vector of x is [c1, c2] = [(3x1 - x2 - 5x3)/20, (x2 - 2x1)/10 + (3x1 - x2 - 5x3)/40]. This is the vector representation of x in the basis β.

Learn more about vector here:

https://brainly.com/question/31490988

#SPJ11

False.

The 85th percentile of a distribution cannot be less than zero. The percentile is a measure that indicates the percentage of data points below a given value. Therefore, the 85th percentile refers to the point in the distribution where 85% of the data falls below that point. Since zero is the lowest possible value in any distribution, it is impossible for the 85th percentile to be less than zero. It is important to note that percentiles are relative measures and can only be interpreted in the context of the distribution they are derived from.
The statement "the 85th percentile of a distribution can sometimes be less than zero" is a. true. In a distribution, the percentile represents the value below which a given percentage of the data falls. In this case, the 85th percentile indicates the value below which 85% of the data points lie. If the distribution is negatively skewed, with most of its data points concentrated on the left side and towards negative values, the 85th percentile can indeed be less than zero. It ultimately depends on the specific distribution and the range of values it contains.

To know more about percentile percentile visit:

https://brainly.com/question/28839672

#SPJ11

Answer:

167925

Step-by-step explanation:

Liabilities are things that he owes.

Home value is an asset (not a liability).

Mortgage is a liability (he owes!).

Credit card balance is a liability (he has to pay that much).

Owned equip is owned (asset).

Car value is an asset.

Investments are assets.

The kitchen loan is a liability (he has to pay that back).

So add up those liabilities: Mortgage + credit card + kitchen loan

149367+6283+12275 = 167925

The area of the figure is 197 cm².

We have,

From the figure,

We can make three shapes.

Rectangle 1:

Area = 9 x 3 = 27 cm²

Rectangle 2:

Area = (9 + 3) x (17 - 6) = 12 x 11 = 132 cm²

Trapezium:

Area = 1/2 x (parallel sides sum) x height

= 1/2 x (12 + 7) x (15 + 6 - 17)

= 1/2 x 19 x 4

= 19 x 2

= 38 cm²

Now,

The area of the figure.

= 27 + 132 + 38

= 197 cm²

Thus,

The area of the figure is 197 cm².

Learn more about rectangles here:

https://brainly.com/question/15019502

#SPJ1

The equation (x-5)² + (y+1)² = 256 represents a circle with center T(5,-1) and a radius of 16 units. Therefore, the correct answer is B.

The standard form of the equation of a circle with center (h,k) and radius r is given by:

(x-h)² + (y-k)² = r²

In this case, the center is T(5,-1) and the radius is 16 units. Substituting these values into the standard form, we get:

(x-5)² + (y+1)² = 16²

This simplifies to:

(x-5)² + (y+1)² = 256

Therefore, the correct answer is B.

To learn more about circle click on,

https://brainly.com/question/31004585

#SPJ1

A value of theta in the first quadrant that satisfies the equation is approximately 0.4548 radians or 26.1 degrees.

Starting with the equation:

6sin(2θ) = 5

Divide both sides by 6:

sin(2θ) = 5/6

We know that sine is positive in the first and second quadrants. Since we are looking for a value of theta in the first quadrant, we can use the inverse sine function to solve for 2θ:

2θ = sin⁻¹(5/6)

Using a calculator, we get:

2θ ≈ 0.9095 radians

Dividing by 2, we get:

θ ≈ 0.4548 radians

To convert to degrees, we can use the conversion formula:

1 radian = 180/π degrees

So:

θ ≈ 0.4548 radians = (180/π) * 0.4548 degrees ≈ 26.1 degrees

Therefore, a value of theta in the first quadrant that satisfies the equation is approximately 0.4548 radians or 26.1 degrees.

To know more about first quadrant refer here:

https://brainly.com/question/2550684

#SPJ11