For an object to move in a uniform motion it has to have either a constant velocity or a constant acceleration. If the object has a constant velocity then it is moving at zero acceleration and this means moving with out slowing down or speeding up.
what is the results of a loop of wire turning between two permanent magnets in a generator?
A. the permanent magnets have a current flowing through them.
B. the current in the loop of wire stops flowing.
C. the loop of wire has a current flowing through it
D. energy from the crank transforms into mechanical energy.
C. The loop of wire has a current flowing through it.
Answer:
c
Explanation:
a pex
The maximum induced emf in a generator rotating at 28 rad/s is 35 v. How fast must the rotor of the generator rotate if it is to generate a maximum induced emf of 65 V?
Answer:
148
Explanation:
you have to add 28+35+65
How does decreasing the distance between the two objects affect the gravitational force?
Answer:
Decreasing the distance between the two objects affect the gravitational force by strengthening it.
Explanation:
Gravity is stronger when the distance is shorter.
Gregg Reid of Atlanta, Georgia, built a motorcycle that is over 4.5 m
long and has a mass of 235 kg. The force that holds Reid and his motor
cycle in a circular path with a radius 25.0 m is 1850 N. What is Reid’s
tangential speed? Assume Reid’s mass is 72 kg.
With Georgia's motorcycle at over 4.5 m long and having a mass of 235 kg, Reid’s tangential speed is mathematically given as
vt=12.4m/s
What is Reid’s tangential speed?Generally, the equation for the Conservation of momentum is mathematically given as
mn=m1+m2
Therefore
mn=235+72
mn=307
Therefore
Fc=mn*a
THerefore
[tex]vt=\sqrt{\frac{rFc}{mn}}\\\\vt=\sqrt{\frac{25*1850}{307}}[/tex]
vt=12.4m/s
In conclusion, The tangential speed is
vt=12.4m/s
Read more about Speed
https://brainly.com/question/4931057
A tennis ball with a speed of 22.2 m/s is moving perpendicular to a wall. After striking the wall, the ball rebounds in the opposite direction with a speed of 14.9184 m/s. If the ball is in contact with the wall for 0.00965 s, what is the average acceleration of the ball while it is in contact with the wall? Take "toward the wall" to be the positive direction. Answer in units of m/s 2
Answer:
[tex]a=-3846.46\ m/s^2[/tex]
Explanation:
Given that,
Initial velocity of the ball, u = 22.2 m/s
Final velocity of the ball, v = -14.9184 m/s (minus sign shows opposite direction of motion)
Time for contact, t = 0.00965 s
We need to find the average acceleration of the ball when it is in contact with the ball. The acceleration of an object is equal change in velocity per unit time. So,
[tex]a=\dfrac{v-u}{t}\\\\a=\dfrac{-14.9184 -22.2 }{0.00965 }\\\\a=-3846.46\ m/s^2[/tex]
So, the acceleration of the ball is [tex]3846.46\ m/s^2[/tex] towards the opposite direction of motion.
SOMEONE PLEASE HELPPP!
Answer:
The first and third one
Explanation:
The roughness of the surfaces is very important when determining friction as well as the force pressed on a surfaces as it helps increase friction.
HOPE IT HELPED
1. How many bones are in the collection?
Answer:
Explanation:
The NISP of the bones found in the park is 22. 2. The bones that belong to the axial skeleton is the 3 skulls, and the bones that belong to the appendicular skeleton are the 6 femora, 4 hip bones, 2 humerus, 2tibiaes, and 5 scapula bones.
Hope it helps.... :)
Why are electromagnets, rather than permanent magnets, used in MRLs?
Answer:
The main advantage of an electromagnet over a permanent magnet is that the magnetic field can be quickly changed by controlling the amount of electric current in the winding. However, unlike a permanent magnet that needs no power, an electromagnet requires a continuous supply of current to maintain the magnetic field.
Explanation:
Density = Mass/Volume
If a ball has a mass of 25g and a Volume of 50ml, what is the Density of the ball?
Answer: 0.5
mass=50
volume=25
25/50=0.5
Heating one kg of water from 353K to 354K
Answer:
Explanation:
How much energy does it take to heat 1 kg of water?
The specific heat capacity of water is 4,200 Joules per kilogram per degree Celsius This means that it takes 4,200 J to raise the temperature of 1 kg of water by 1°C. Lead will warm up and cool down fastest because it doesn't take much energy to change its temperature.
A wave has a frequency of 6 Hz, how long is the period?
A- 12
B- .17
C- 6
D- 36
Answer:
B- 0.17
Explanation:
F = 1/T
T = 1/F = 1/6 = 0.16666666 = 0.17
What is the difference between an object with a constant accleration and a constant velocity?
a. There is no difference between constant velocity and constant acceleration.
b. If an object has a constant velocity it will not have an acceleration- the velocity does not change. A constant acceleration means an objects velocity will increase or decrease by the same amount in each interval of time.
c. If an object has a constant acceleration it will not have a velocity. A constant velocitty means an object will increase or decrease displacement by the same amount in each interval of time
d. If an object has a constant acceleration on a velocity vs time graph the slope of the line will = zero.
To summarize, an object moving in uniform circular motion is moving around the perimeter of the circle with a constant speed. While the speed of the object is constant, its velocity is changing. Velocity, being a vector, has a constant magnitude but a changing direction.
can u figure it out from there but if anything i think it is C
To summarize, an object moving in uniform circular motion is moving around the perimeter of the circle with a constant speed. While the speed of the object is constant, its velocity is changing. Velocity, being a vector, has a constant magnitude but a changing direction.
can u figure it out from there but if anything i think it is C
A 12.0-kilogram mass weighs 84.0 newtons on a newly discovered planet. What is the magnitude of the acceleration due to gravity on this planet?
A. 1.20 m/s²
B. 7.0 m/s²
C) 9.8 m/s²
D. 84 m/s²
Acceleration be a
Apply Newton's second law
[tex]\\ \rm\Rrightarrow F=ma[/tex]
[tex]\\ \rm\Rrightarrow a=\dfrac{F}{m}[/tex]
[tex]\\ \rm\Rrightarrow a=\dfrac{84}{12}[/tex]
[tex]\\ \rm\Rrightarrow a=7m/s^2[/tex]
[tex] \huge\bf\underline{solution}[/tex]
Mass of given body (m) = 12Kg
Force (F) = 84.0N
We have been asked to find the magnitude of of the acceleration .
[tex] \huge\bf\purple{force = mass \times acceleration}[/tex]
Put all the given value we get
[tex] \sf \dashrightarrow84 = 12 \times acceleration \\ \\ \sf \dashrightarrow \frac{84}{12} = acceleration \\ \\ \sf \dashrightarrow7 {ms}^{ - 2} = acceleration[/tex]
So, the acceleration due to gravity on that planet is 7m/s² .
So Your answer is B) 7.0m/s²
What is significant about the temperature 0 K
A. Matter no longer exists
B. Ice melts
C. Water freezes
D. Particles no longer move
Answer: I's either A. Matter no longer exists or D. Particles no longer move
Explanation:
Sorry if I get it wrong
Hope his helps :)
Answer:
d
Explanation:
in 2d kinematics what does “above horizontal” mean for angles i found from vectors?
Answer:
Explanation:
140m
Explanation:
The velocity must be broken down into x (horizontal) and y (vertical) components. We can use the y component to find how high the object gets. To find vertical velocity, vy, use vy=vosinθ.
vy=(75ms)sin45o=53ms
Next we find how long it takes to reach the top of its trajectory using vf=vo+at.
0ms=53ms+(−10ms2)t
t = 5.3s
Finally, find how high the object goes with d=vot+12at2.
d=(53ms)5.3s+12(−10ms2)(5.3s)2=140m
You walk 45 m at an angle of 25 degrees S of E. Then you walk 30 m North. What is
the magnitude of the resultant vector?
Answer:
Explanation:
The formula for calculating the magnitude of the resultant vector is expressed as;
[tex]R = \sqrt{(\sum Fx)^2+(\sum Fy)^2}[/tex]
[tex]\sum Fx[/tex] is the sum of distances along the x component
[tex]\sum Fy[/tex] is the sum of distances along the y component
[tex]\sum Fx = 45 cos 25^0\\\sum Fx = 40.78m\\\\\sum Fy = -45 sin 25^0+30\\\sum Fx = 10.98m\\[/tex]
[tex]R = \sqrt{(40.78)^2+(10.98)^2}\\R = \sqrt{1663.0084+(120.61)}\\R = \sqrt{(1783.6184}\\R = 42.23m[/tex]
Hence the magnitude of the resultant vector is 42.23m
Answer:
NO
Explanation:
If you slid down Splash Mountain you would eventually come to a big pool at the end. Which one of Newton's Laws is this?
Answer:
Gravity
Explanation:
Answer:
law of gravity
Explanation:
i think
During a spring tide, what is arrangement of the moon, the sun and the earth?.
Explanation:
Spring tides generally occur twice a month—during new and full moons, when the Earth, Sun, and Moon line up in a row. In this arrangement, the gravities of the Sun and Moon work together and have the strongest pull on Earth. This produces the largest difference between high and low tide.
Spring Tides
During full moon or new moon phases, the gravitational forces of the Sun and Moon are maximized, producing very large ranges of tidal highs and lows called spring tides
A 20N net force acts upon an object with a mass of 4. 0kg. What is the object's acceleration?
Answer:
5ms^-2
Explanation:
F = 20N, m = 4.0kg, a = ?
Using the formula for Force
F = ma
Then making acceleration the subject of the formula
a = F/m
a = 20N/4.0kg
a = 5ms^-2
Which refers to the thermal energy that flows from one substance to another when the substances differ in temperature?
heat
temperature
convection
flow
Answer:
Heat
Explanation:
Heat. The thermal energy that flows from one substance to another when the substances differ in temperature. Thermal equilibrium. The state in which no thermal energy transfer occurs because both substances are at the same temperature. Specific heat.
Heat is the thermal energy that flows from one substance to another when the substances differ in temperature.
What is meant by thermal energy ?Thermal energy is the term used to describe the energy present in a system that is responsible for setting its temperature.
Here,
The average kinetic energy of the particles in a material is measured by its temperature. The overall kinetic energy of the particles in a material is measured by thermal energy.
The temperature and thermal energy of a material increase with the particle velocity.
The amount of thermal energy that is transferred from one media or object to another, or from an energy source to a medium or object, is measured in terms of heat.
Radiation, conduction, and convection are the three mechanisms through which such energy can be transferred.
The heat energy may be transformed into other types of energy, such as mechanical, kinetic energy, etc.
Hence,
Heat is the thermal energy that flows from one substance to another when the substances differ in temperature.
To learn more about thermal energy, click:
https://brainly.com/question/31631845
#SPJ5
10.0 kg cannonball is thrown with a 7.5 m/s^2 acceleration. What is its force? *
Answer:
I think you mean what was the force applied on the cannonball, right? Well, that would be 75 N(newtons).
Explanation:
F = ma(force = mass x acceleration). Plus in the values it would be...
F = m(10.0 kg) x a(7.5 m/s^2), or 75 kg/s^2/75 N(newtons). Easy math.
What is the wave speed of a wave if the wavelength is 100 m and the period is 2 seconds?
Explanation:
speed =frequency *wavelength
frequency=1/2
=0.5Hz
speed=0.5*100
50m/s
Ariana is heating a beaker of water. She notices that the water at the bottom
of the beaker is warmer than the water at the top. Which type of thermal
energy transfer will eventually make the temperature of the water at the top
and bottom the same?
O A. Translation
O B. Radiation
C. Conduction
O D. Convection
Answer: the answer is D (convection)
Answer:
D.Convection
Explanation:
In urgent need of help, science is my worse subject!
The first reason is that in the past humans didn't necessarily see the connections between the oceans and thus labelled them that way separating them into 5 oceans and the names stuck to this day.
Secondly, while all the oceans of the world constitute one large Ocean, people need some way to identify each part of it since it is easier to think when we have different categories instead of one large category.
Hope that helped!
In a stable ecosystem, the number of predators _____________ if the number of prey increases. Question 12 options: Decreases Stays the same Increases Dies.
In a stable ecosystem, the number of predators increases if the number of prey increases.
What is the relation between predators and prey?Predators are the species that are dependent upon prey for their foods. predators actually hunt the prey for their food.
predators are the species that depend upon other living species like deer fish goats etc for example lions depend upon deer, zebras, etc.
while the preys are the species who depend upon the plants for their food so if the number of preys will be higher then the number of the predators will also be higher.
Thus In a stable ecosystem, the number of predators increases if the number of prey increases.
To know more about the Ecosystem follow
https://brainly.com/question/842527
What is parallel connection
A car has a mass of 1000 kg. What is the acceleration produced by a force of 2000 N?
Newton's 2nd Law of Motion states:
F = ma
Parents who make few demands on their children and use little punishment are what?
Answer:
Permissive - allowing or characterized by great or excessive freedom of behavior.
Explanation:
Hope this helps! Please let me know if you need more help, or if you think my answer is incorrect. Brainliest would be MUCH appreciated. Have a great day!
do you think they were used creatively?
(ahhhggg ignore i dont remember how to delete answers)
No. In my opinion, they were not used creatively. They were used speciously, disingenuously, and unimaginatively.
As always, others are free to disagree.
A magnetic field is created ____________.
a. when a compass is placed next to a wire.
b. when an electric current flows through a wire.
c. when wire is wrapped around an iron core.
d. when wire is twisted into a loop.
Answer: B
Explanation:
Magnetic fields are created due to charges in motion. Current by definition is the amount of charge flowing over time. Therefore, the answer is B, when an electric current flows through a wire.
Answer:
b. when an electric current flows through a wire
Explanation:
Hans Oersted discovered about two hundred years ago that when the electric current flowed through a wire a magnetic field was created.
(*) Sorry for my late answer but I hope this helps others that are looking for this.
I got 100% ;)