Questions And Answers About Air Resistance.
Question 1: What is Air resistance?
Answer: Air resistance is a force that is caused by air. The force acts in the opposite direction to an object moving through the air. A lorry with a flat front will experience high air resistance while a sports car with a streamlined shape will experience lower air resistance, allowing the car to go faster.
Question 2: What causes air resistance?
Answer: Air resistance, also known as drag, is a force that is caused by air, the force acts in the opposite direction to an object moving through the air. It is where air particles hit the front of the object slowing it down. The more surface area, the more air particles hit it and the greater the resistance.
Question 3: How can air resistance be overcome?
Answer: Two ways to reduce air resistance are stated: reducing the area in contact with air (by the cyclist ducking down or cycling behind someone else) and by being more streamlined (wearing smoother surfaces or a more streamlined helmet).
Question 4: What happens when air resistance increases?
Answer: As it gains speed, the object's weight stays the same but the air resistance on it increases. There is a resultant force acting downwards. Eventually, the object's weight is balanced by the air resistance. There is no resultant force and the object reaches a steady speed – this is known as the terminal velocity.
Questions And Answers About Water Resistance.
Question 1: What is Water resistance?
Answer: Water resistance is a type of force that uses friction to slow things down that are moving through water. ... Water resistance occurs because of the particles in the liquid. As an object moves through a liquid, it collides with the particles which cause it to slow down.
Question 2: What causes water resistance?
Answer: Water resistance doesn't have to be just water, however, it can happen to objects moving through any type of fluid. Water-resistance happens because of the particles in water or the fluid. As the object moved through it collides with the particles which try to slow it down.
Question 3: How is water resistance useful?
Answer: Like friction and air resistance, it SLOWS THINGS DOWN, trying to stop them from moving. Water resistance can also be useful at times. When you are swimming and you push against the water with your hands, the water-resistance pushes back and helps you to move forward. This also happens when you use oars to row a boat.
Question 4: Does water-resistant mean waterproof?
Answer: The technical definition of water-resistant is that it's able to resist the penetration of water to a certain degree, but not entirely. Waterproof technically means that it's impermeable to water, no matter how much time it spends in the water.
Hope This Helps...:)
30 POINTS!!! CAN U AWNSER IT?? :)
A space ship is cruising at 2,500.0 km/hr with the engines off. The engines fire for 8.00s
with a thrust of 45,450 N, bringing the ship up to its new speed of 2,750 km/hr. What is the mass of the ship? GOOD LUCK :)
Answer:
5235.84 kg
Explanation:
There is one theorem - whose proof I will never remember without having to drag calculus in there - that says that the variation of momentum is equal to the force applied times the time the application last.
[tex]F\Delta t = m \Delta v[/tex] As long as the engine isn't ejecting mass - at this point it's a whole new can of worm - we know the force, we know the variation in speed, time to find the mass. But first, let's convert the variation of speed in meters per second. The ship gains 250 kmh, [tex]\Delta v = 69.4 m/s[/tex];
[tex]45 450 \cdot 8 = 69.4 m \rightarrow m = \frac{45450\cdot 8}{69.4} = 5235.84 kg[/tex]
2. A student becomes so excited by the whole idea of black holes that he decides to jump into one. It has a mass 10 times the mass of our Sun. What is the trip like for him
Answer:
*Disclaimer you can't actually do that, or at least not yet because the nearest black hole is at least 1,000 light years away. But if we could...
His journy would be pretty fast and horrific. For him, he would slowly be streched apart or spegetified into a string of atoms as he nears the event horizoin. But for an outside observer he would apear to go slower and slower and would never actualy reach the event horizion. This is becuase of einstines general relativity, massive objects slow time down. He would also apear to become red as the lights wavelength is streched out due to the entense gravity of the black hole.
A force of 6.0 N acts on a 4.0 Kg object for 10.0s. What is the object's change in momentum?
Answer:
60 Ns
Explanation:
change in momentum = Fxt
6*10
60 Ns
A force of 6.0 N acts on a 4.0 Kg object for 10.0 s. The object's change in momentum is 60 kg-m/sec.
What is force?A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
change in momentum = force . time
change in momentum = 6 . 10 = 60
A force of 6.0 N acts on a 4.0 Kg object for 10.0 s. The object's change in momentum is 60 kg-m/sec.
To learn more about force refer to the link:
brainly.com/question/13191643
#SPJ5
A train is running at a speed of 60 m/s . what will this speed be in km/h ?
don't answer if u don't know
spammers = reported
Speed= 60 m/s
for converting m/s to km/h =multiply with 5/18
for converting km/h to m/s= multiply with 18/5
so, 60 × ( 18/50) = 216 km/h
A projectile is shot at an angle of 45 degrees with velocity components Vx and Vy both equal to 5 m/s. What is the magnitude of the initial velocity? Round to nearest tenth.
Answer:
7.1 m/s
Explanation:
Explanation is attached
Who does more work- a man who lifts a large box from the ground into the back of a truck, or a man who puts the same box on a trolley and wheels it up a ramp into the truck?
Answer: the first man does more work than the other
Explanation: because the second man has tool a trolley and a ramp to help him make his job easier
How is AU different from a solar mass?
A. An AU is the distance from the black hole at the center of the galaxy to the closest planet, and solar mass represents a measurement equal to the mass of a black hole's quasar.
B. An AU is the smallest unit of measurement in quantum mechanics, and a solar mass is the largest unit of measurement in astronomy.
C. An AU is the distance from the event horizon to the singularity of a black hole, and solar mass is the distance between the two closest black holes in a galaxy.
D. An AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.
AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.
The units applied in astronomy is quite different from the units applied in daily life. The unit called astronomical units (AU) describes the distance from the earth to the sun. The unit solar mass represents the mass of the sun and is taken to be equal to 1.989 x 10^30 kilograms.
Therefore, the difference between the AU and solar mass is that; AU is the distance from the earth to the sun, and solar mass represents a measurement equal to the mass of our sun.
Learn more: https://brainly.com/question/8646601
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Jinan has high cholesterol and wants to do what he can to improve it through his diet. What would be the BEST thing for him to increase in his diet to address this issue?
A.
sugars
B.
protein
C.
carbohydrates
D.
unsaturated fat
PLEASE NO LINKS
Answer:
D. unsaturated fat
Explanation:
Unsaturated fats are considered the healthiest fats because they improve cholesterol, help reduce inflammation (a risk factor for heart disease), and help decrease the overall risk of developing heart disease. The main source of unsaturated fats are plant-based foods.
Answer:unsaturated fat
Explanation:
Will a dead animal decay faster if it died in the hot summer or in the cold winter?
Answer:
hot summer
Explanation:
it's common sense
Answer:
Hot summer
Explanation:
If the body is exposed to heat then it would decompose faster because the climate is more humid. Whereas if it was in the cold winter then it would decompose slower (not to mention that it could freeze causing it not to decompose at all).
What is the instruments used to measure light intensity, wind intensity and relative humidity
Answer:
we use : photometer to measure light intensity
:Anemometer to measure wind intensity
:Hygrometer to measure relative humidity
Consider a space shuttle which has a mass of about 1.0 x 105 kg and circles the Earth at an altitude of about 200.0 km. Calculate the force of gravity that the space shuttle experiences. The mass of the earth is?
Answer:
1.6675×10^-16N
Explanation:
The force of gravity that the space shuttle experiences is expressed as;
g = GM/r²
G is the gravitational constant
M is the mass = 1.0 x 10^5 kg
r is the altitude = 200km = 200,000m
Substitute into the formula
g = 6.67×10^-11 × 1.0×10^5/(2×10^5)²
g = 6.67×10^-6/4×10^10
g = 1.6675×10^{-6-10}
g = 1.6675×10^-16N
Hence the force of gravity experienced by the shuttle is 1.6675×10^-16N
The person is in motion
relative to...
Answer:
muscular force in relative to this
You throw a can of cranberry sauce straight up in the air with an initial velocity of 12 m/s. What is the maximum height the baseball reaches above your head.
Answer:
Δx=7.35m
Explanation:
This is a free fall problem (g= -9.8 m/s²).
Displacement: ? <--- what you're trying to find (max height)
Initial Velocity: 12 m/s
Final Velocity: 0 m/s <-- since the can will land back in your hands
Time: Missing <-- not needed to solve
Acceleration: -9.8 m/s²
The equation that you will use is vf²=vi²+2aΔx
Now plug the information into the equation!
(0m/s)²=(12m/s)²+2(-9.8m/s²)Δx
Multiply the 2 with the acceleration (-9.8m/s²)
(0m/s)²=(12m/s)²-19.6m/s²Δx
Now you need to square the final and initial velocity
0m/s=144m/s-19.6m/s²Δx
Move 144 to the other side of the equal sign
-144m/s=-19.6m/s²Δx
Divide both sides by -19.6m/s²
7.346m=Δx
You can round it to the tenth or hundreth place, up to you!
For this example, I'll round to the hundredth...
Δx=7.35m
I would double check this answer or review it yourself to see if it's correct.
Good luck with your studies!
A spring has a spring constant of 150N/m
Calculate:
The mass in grams which must be hung from the spring in order to extend it by 0.1 m
Answer:
15N
Explanation:
mass=w/g 150N/m×0.1m
Ans=15N
Answer:
Both springs have a constant of 25Nm and the block is motionless. If the bottom spring is compressed 0.4m past its equilibrium and the block has a mass of 3kg, how far is the top spring stretched past its equilibrium?
g=10ms2
Possible Answers:
1.0m
0.8m
0.2m
0.4m
0.6m
Correct answer:
0.8m
Explanation:
Since the block is motionless, we know that our forces will cancel out:
Fnet=0
There are three forces in play: one from each spring, as well as the force of gravity. If we assume that forces pointing up are positive, we can write:
Fspring,top+Fspring,bot−mg=0
Plugging in expressions for each spring force, we get:
kxtop+kxbot−mg=0
Rearring for the displacement of the top spring, we get:
xtop=mg−kxbotk=(3kg)(10ms2)−(25Nm)(0.4m)25Nm
xtop=30N−10N25Nm=0.8m
PLEASE ANSWER NEED HELP!!!!!!!! PLEASE THE CORRECT ANSWER!!!!!!
Lamar has been feeling a little sluggish. He is not sick, but he has been working a lot, and even though he goes for a run every morning, he is not getting the same benefits out of it that he used to. His friend suggests that he try acupuncture, but Lamar does not know much about it or why it would be helpful. What is the BEST explanation that you could give Lamar?
A.
Acupuncture is designed to make everyone feel energized and alert.
B.
Acupuncture focuses on rewiring the nervous system more effectively.
C.
Acupuncture is designed to help the energy in the body flow more efficiently.
D.
Acupuncture is very unscientific and completely rejected by Western medicine.
PLEASE NO LINKS OR I WILL REPORT YOU
Answer:
The correct answer is a.
an electric generator has an 18-cm-diameter, 120-turn coil that rotates at 60 hz in a uniform magnetic field that is perpendicular to the rotation axis.
The magnetic field strength is needed to generate a peak voltage 0.15 T.
The given parameters;
diameter of the coil, d = 18 cmradius of the coil, r = 9 cmnumber of turns, N = 120 turnsfrequency, f = 60 HzPeak voltage, E = 170 VThe area of the coil is calculated as follows;
[tex]A = \pi r^2\\\\A = \pi \times 0.09^2\\\\A = 0.0255 \ m^2[/tex]
The maximum emf induced in the coil is calculated as follows;
[tex]E_{max} = NBA \omega \\\\B = \frac{E_{max}}{NA\omega } \\\\[/tex]
where;
B is the magnetic field strengthω is the angular frequency = 2πf[tex]B = \frac{170 }{120 \times 0.025 \times 2\pi \times 60 } \\\\B = 0.15 \ T[/tex]
Thus, the magnetic field strength is needed to generate a peak voltage 0.15 T.
"Your question is not complete, it seems to be missing the following information";
An electric generator has an 18-cm-diameter, 120-turn coil that rotates at 60 hz in a uniform magnetic field that is perpendicular to the rotation axis.
What magnetic field strength is needed to generate a peak voltage of 170 V?
Learn more here:https://brainly.com/question/17238887
the relationship between global warming and greenhouse gases is the _______.
how both affect the ozone layer and affect temperature in a grobal way
A 50-n force is applied to a 10-kg chair, but the chair does not change its motion. What could explain this?.
Explanation:
it will not change it's motion because it's force is less than the force applied
If Corolla does 1,800,000 Joules of work in a 400 meter race, how much average force was applied through that distance?
Answer:
4500 NExplanation:
The work done by an object can be found by using the formula
workdone = force × distance
To find the force applied we make force the subject in the formula above
That's
[tex]f = \frac{w}{d} \\ [/tex]
w is the workdone
d is the distance
From the question we have
[tex]f = \frac{1800000}{400} = \frac{18000}{4} = 4500\\ [/tex]
We have the final answer as
4500 NHope this helps you
How are earthquakes at continental plate boundaries different from earthquakes at mid-ocean ridges?
Differences between earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges discussed in the answer.
What is earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges?When plates travel in the same direction and collide, this happens. The thinner, denser, and more flexible oceanic plate dips beneath the thicker, more rigid continental plate when a continental plate meets an oceanic plate. It's known as subduction.
Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction. The continent's undercut rocks start to melt. On occasion, a chain of volcanoes forms as the molten rock rises to the surface and passes through the continent. Nearly 80% of earthquakes happen along convergent borders, when plates are being forced together.
Shallow earthquakes, often less than 30 km deep, occur in small bands adjacent to plate borders along mid-ocean ridges and transform edges. There are earthquakes in subduction zones at various depths, some of which are more than 700 km deep. Because they occur everywhere throughout the subducting slab that stretches beneath the opposing plate, earthquake bands are wider along subduction zones. Wide areas of distributed earthquakes may be associated with collision zones between continents, such as those between the Eurasian plate and the plates to the south of the African, Arabian, and Indian tectonic arcs.
Learn more about earthquakes here:
https://brainly.com/question/29500066
#SPJ2
A sports car accelerates from 0 to 60mph ,27 m/s ,in 6.3 secounds .The car exerts a force of 4106N . What is the mass of the car
The car accelerates 60 mph in 6.3 seconds. Thus, the acceleration is [tex]\frac{60}{6.3}[/tex]. [tex]f=ma[/tex], so [tex]4106 = m(\frac{60}{6.3})[/tex], so [tex]m=431.13[/tex].
Name two processes that release nuclear energy?
Answer: Nuclear energy is released from an atom through one of two processes: nuclear fusion or nuclear fission. In nuclear fusion, energy is released when the nuclei of atoms are combined or fused together. This is how the sun produces energy. In nuclear fission, energy is released when the nuclei of atoms are split apart.
Let me know if it helps!
when light reflects from a surface, there is a change in its
When light reflects from a surface, there is a change in its intensity. Thus, the correct option is C.
What is Light intensity?Light intensity is also known as luminous intensity. It is the amount of light which is falling on a surface over any given square foot or square meter in size. Light intensity can be measured in terms of lumens per square foot (foot candles) or lumens per square meter (lux).
Light intensity is affected by various factors such as surface on which the light rays strike, the medium, reflection, and the refraction of light.
When a ray of light reflects from a surface, there is a change in the intensity of light and also the speed of light in that medium.
Therefore, the correct option is C.
Learn more about Light intensity here:
https://brainly.com/question/9195922
#SPJ5
Your question is incomplete, most probably the complete question is:
When light reflects from a surface, there is a change in its:
a. frequency
b. velocity
c. intensity
d. phase
Plz help ⭐..................
Answer:
where in the world is the image????..
is putting water in a water bottle increasing its mass?
Answer:
No
Explanation:
Answer:
yes
Explanation:
Can an object have positive acceleration and decreasing speed?.
Find the displacement in the time interval 3 seconds to 4 seconds
A. 1m
B.3m
C.7m
D.9m
Answer:
B. 3 m
Explanation:
The position of the line at 3 seconds is 9 m and at 4 seconds is 12m .
Therefore; Displacement = 12 - 9 = 3 m
See the person on the right side of the front car. Six reference points could be used to show that the person is in / is NOT in motion. They are:
**a person standing on the ground **the car **the seat
**another person on the ride **the track **the sun
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
1. According to person standing on ground ~
The person is in motion2. According to The car ~
The person is not in motion3. According to the Seat ~
The person is not in motion4. According to another person on ride ~
The person is not in motion5. According to the track ~
The person is in motion6. According to the Sun ~
The person is in motionI hope that's what you were looking for, goodluck for your assignment ~
A 25 kg chair initially at rest on a horizontal floor requires a 165 N horizontal force to set it in motion. Once the chair is in motion, a 127 N horizontal force keeps it moving at a constant velocity.
Find the coefficient of static friction between the chair and the floor.
b. Find the coefficient of kinetic friction between the chair and the floor.
a. The coefficient of static friction between the chair and the floor is 0.67.
b. The coefficient of kinetic friction between the chair and the floor is 0.52.
Given the following data:
Mass of chair = 25 kgHorizontal force A = 165 NHorizontal force B = 127 NScientific data:
Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]a. To find the coefficient of static friction between the chair and the floor:
Mathematically, the force of static friction is given by the formula;
[tex]F_s = uF_n = umg[/tex]
Where;
Fs represents the force of static friction.μ represents the coefficient of static friction.[tex]F_n[/tex] represents the normal force.g is the acceleration due to gravity.mμ is the mass of an object.Making μ the subject of formula, we have:
[tex]u=\frac{F_s}{mg}[/tex]
Substituting the given parameters into the formula, we have;
[tex]u=\frac{165}{25 \times 9.8} \\\\u=\frac{165}{245}[/tex]
μ = 0.67
b. To find the coefficient of kinetic friction between the chair and the floor:
Note: The normal force would be the same as above.
[tex]u_k = \frac{F_k}{F_n} \\\\u_k = \frac{127}{245}\\\\u_k =0.52[/tex]
Read more on force of static friction here: https://brainly.com/question/25686958
please help pleaseeeeee
Answer:
25mg
Explanation:
it basically explains itself