Answer:
iIn a nuclear plant, the heat source is from the nuclear reaction whereas in a thermal power plant it is from the combustion of coal. The difference is in the inlet steam parameters to the turbine in a nuclear plant. Thermal power plants use steam at superheated conditions. ... The nuclear plant uses a 'wet steam turbine'.
Explanation:
The heat source in a nuclear power plant is the nuclear reaction, whereas the heat source in a thermal power plant is coal combustion. The difference is in the turbine's input steam characteristics.
What is a power plant?Power plant is an industrial structure that generates electricity. The majority of power plants are linked to the electrical grid.
Nuclear power bare a form of thermal power plant. You have a reactor where fission takes place and heat is generated, a heat exchanger that transports this heat to where it is needed.
Thermal power plant equipment converts this heat into electric energy, usually via a steam turbine.
The reactor, heat exchanger, and thermal conversion technology all have different designs and technologies, but the overall architecture is quite similar to other types of thermal power plants.
The heat source in a nuclear power plant is the nuclear reaction, whereas the heat source in a thermal power plant is coal combustion. The difference is in the turbine's input steam characteristics.
Hence, the two types of power plants differ in difference is in the turbine's input steam characteristics.
To learn more about the power plant, refer to the link;
https://brainly.com/question/7670779
#SPJ2
If you represented Earth's history by a line that is 1 m long, how long a segment (in cm) would represent the 400 million years since life moved onto the land
The length of the segment that will represent the 400 million years is 8.8 cm.
The given parameters:
length of age of the Earth = 1 meter longage of the Earth = 4.54 billion yearstime to be represented in the given segment = 400 million yearsThe length of the segment that will represent the 400 million years is calculated as follows;
4.54 billion years ------------- 1 m
400 million years ------------- ?
[tex]\frac{1 \ m}{4.54 \times 10^9 \ years} \times 400 \times 10^6 \ years = 0.088 \ m[/tex]
The length of the segment in centimeters (cm) is calculated as follows;
[tex]= 0.088 \ m \times 100 \ cm\\\\= 8.8 \ cm[/tex]
Learn more here:https://brainly.com/question/19471802
Another nervous papa bear paces at 1.0 m/s north for 3.0 s, then at 1.6 m/s south for 5.0 s, and then
at 1.4 m/s north for 4.0 s. The average speed of this bear is:
a) 1.3 m/s
b) 1.4 m/s
c) 4.0 m/s
d) 8.0 m/s
Answer:
Explanation:
Average speed is total distance traveled over the time needed to do so.
d = vt
v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)
v = 16.6 / 12
v = 1.383333333...
v = 1.4 m/s
7. A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then A) what is the maximum spring potential energy of the simple harmonic motion
At the equilibrium position of the spring, the mass has kinetic energy
1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ
and when the spring is maximally compressed, this kinetic energy is converted into potential energy.
The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.
To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.
In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.
The formula for maximum displacement (A) is given by:
A = v0 / ω
where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.
The angular frequency (ω) is given by:
ω =[tex]\sqrt{(k / m)[/tex]
where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).
Substitute the values:
ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s
Now, calculate the maximum displacement:
A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm
Next, calculate the maximum spring potential energy:
Us =[tex](1/2) * k * A^2[/tex]
Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ
To know more about spring potential energy, here
brainly.com/question/29510087
#SPJ2
--The compleete Question is, A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--
why is cooking faster with a pressure cooker. plz help me I beg
Explanation:
The same thing happened in pressure cooker but the temperature inside is most higher.
hope you like my answer
thank you
Because cooking reactions speed up at a higher temperature also the boiling temperature of water increases and hence, the food cooks faster.
source:
https://www.vedantu.com/question-answer/a-pressure-cooker-reduces-cooking-time-for-food-class-9-chemistry-cbse-5feaba32e9fb3d3419e4a61a
cuantos metros hay en 100cm?
Answer: 100cm = 1 meter.
Centi is 100, therefor meaning that 100cm is exactly 1 meter.
I hope this helps!
please.
I mark u brainliest answer
Answer:
destroy
Explanation:
cuz if anyhow throw rubbish, it will affect/destroy the world environment
Answer:
bathing regularly 2pollute 3 throwing waste in land water water pollution
organize the three states of matter from least kinetic energy to greatest kinetic energy
Particle arrangement and movement
⇒ In terms of relative energy, gas particles have the most energy, solid particles have the least energy and liquid particles are somewhere in between. (All compared at the same temperature.)
- BRAINLIEST answerer
ПОМОГИТЕ ПЖЖППЖЖППЖЖПЖЖПЖПЖПЖ ООООООЧЕНЬ СРОЧНО!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! С ДАНО И РЕШЕНИЕМ!!!!!!
4. У сталевій коробці
масою 250 г
розплавляють 100 г
свинцю. Яка кількість
теплоти витратилася
на теплові процеси,
якщо початкова
температура тіл
становила 27 °С?
Answer:
thanks for the points dia
The passage of a wave through a medium is...?
Answer:
Transmission
Explanation:
It’s the passage of electromagnetic waves through a medium.
The passage of a wave through a medium is known as transmission.
What is the transmission of a wave?The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.
Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).
Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.
Therefore, the passage of a wave through a medium is known as transmission.
To learn more about the Transmission of the wave, refer to the link:
https://brainly.com/question/27844842
#SPJ6
What is 1 radian approximately in degrees?
Answer:
180 LUV:)
Explanation:
How does climate change?
Answer:
Con el cielo del agua
Explanation:
espero que te ayude
knives, axe ,blades and nails are examples of
knives, axe ,blades and nails are examples of potential energy
or sharp objects
groundwater returning to earths surface comes up through a ___?
Answer:
Groundwater Returning to earths Surface come Up Though A drought
Explanation:
THIS DOES NOT NEED TO BE EXPLAINED IT'S EZZZ
Balance the following chemical equation:
CO2 + VH20 - CH1206+ voz
[
~
CO₂+
Answer:
Explanation:
Start with Carbon and assume we only get 1 sugar molecule from the process.
you have 6 carbons in the sugar on the right, so you need 6 carbons on the left which only come from CO₂
6 CO₂
you have 12 hydrogen atoms in the sugar on the right, so you need 12 hydrogen atoms on the left which only come from H₂O. At 2 hydrogen atoms per water molecule means you need 6 waters.
6 CO₂ + 6 H₂O → 1 C₆H₁₂O₆
you are supplied with 12 oxygen from the CO₂ and 6 oxygen from the H₂O, but you only need 6 oxygen for the sugar. That means there are 12 oxygen remaining which will become 6 O₂ molecules
6 CO₂ + 6 H₂O → 1 C₆H₁₂O₆ + 6 O₂
4. Your group used an object with fixed mass (heavy or light). How will the results be different
for an object with a different mass?
Why did humans first develop culture?
A. It helped humans distinguish themselves from wild animals.
B. It helped humans become the dominant species on Earth.
C. It helped the members of a society survive in their environment.
D. It helped individuals survive without the support of a society.
SUBMIT
Answer: C.
Correct me if I'm wrong.
A single paragraph can be selected by triple in the paragraph. ture or false
Answer:
The answer for the question should be True
define moment of a force about a point and give the si unit of moment?
Answer:
Moment of a force is the product of the force and the perpendicular distance of force from axis of rotation.
The SI unit of force is newton (N).
Explanation:
Hope it helps you again!
Three point charges are placed on the y-axis: a chargeqaty=a,a charge-2qat the origin, and a chargeqaty= -a.Such an arrangement is called an electricquadrupole.(a) Find the magnitude and direction of the electric field at points on thepositive x-axis. (b) Use the binomial expansion to find an approximate expression for the electric field valid for x >> a.Contrast this behavior to that of the electric field of a point charge and that of the electric field of a dipole.
What is the acceleration of a box weighing 596 N if a force of 777 N is applied to it?
Answer:
[tex]12.79 m/s^2[/tex]
Explanation:
1. Apply Newton's 2nd law:
[tex]F=ma[/tex]
2. Use the definition of weight to find the mass of the box:
[tex]W=mg=m=\frac{W}{g}[/tex]
3. Solve for acceleration in Newton's 2nd law and substitute for mass:
[tex]a=\frac{F}{\frac{W}{g} }[/tex]
4. Plug in the given values from the question and assume [tex]g=9.81m/s^2[/tex]:
[tex]a=\frac{777N}{\frac{596N}{9.81m/s^2} } } =12.79m/s^2[/tex]
70 POINT!!!
IF YOU DON'T KNOW THE ANSWER DO NOT PUT A COMMENT BELOW
THERE ARE TWO QUESTIONS YOU HAVE TO ANSWER
QUESTION 1: Identify any variables that are present as dependent variables, independent variables, and constants in your experimental group and your control group.
QUESTION 2: How does knowing the properties of matter help you separate the substances in mixtures?
Answer:
1) Dependent variable: Type of separation method used
Independent variables: Substance that separated out
Constants: Sand, pepper, and salt
2) you can use the properties of matter to decide on a method to separate out a particular substance based on its unique properties. For example, knowing pepper has a very small mass allows you to use the charge of the static electricity to separate out those particles. Additionally, knowing the solubility of salt allows you to add water to the mixture to be able to remove it from the sand, since the salt dissolves in the water which is poured away.
Which event provides evidence that matter can reflect waves?
A. A dog's bark is barely heard through double-pane windows.
B. A bat finds a moth using echolocation.
C. A whale's song is heard hundreds of miles away,
D. A fish appears to be farther from a boat than it is.
Answer:
B. A bat finds a moth using echolocation
Explanation:
100% i just took that test today
HELP ME PLEASE I DONT GET THIS
A very bouncy mushroom can be modeled as mass of 30g(the mushroom cap) on top of a spring(the mushroom stalk) when spring constant 20 N/m. A bird of mass 50g lands on the mushroom gently so that its velocity is zero when it lands. Questions are in the image.
The motion of the bouncy mushroom can be described as a simple
harmonic motion, SHM.
a) The equilibrium height of the mushroom is 0.024525 m below its initial heightb) The frequency of resulting oscillation is 0.5 Hzc) The maximum compression of the mushroom 0.03924 md) The equation that describes the oscillation of the mushroom as a function of time is; [tex]\underline{x(t) = 0.014715 \cdot cos(0.5\cdot t)}[/tex]Reasons:
The given parameters are;
Mass of the mushroom cap, m = 30 g = 0.03 kg
Mass of the bird = 50 g = 0.05 kg
The spring constant, K = 20 N/m
a) The equilibrium height of the mass spring system, is given as follows;
F = -K·x
[tex]x = \dfrac{F}{K}[/tex]
The applied force, F = The weight of the bird
∴ F = (0.05 kg) × 9.81 m/s² = 0.4905 N
[tex]x = \dfrac{0.05 \, kg \times 9.81 \ m/s^2}{20 \, N/m} = 0.024525 \, m[/tex]
The equilibrium height of the mushroom is 0.024525 m below its initial height.
b) The frequency of oscillation of a spring, ω, is given as follows;
[tex]\omega = \sqrt{\dfrac{K}{m} }[/tex]
Therefore;
[tex]\omega = \sqrt{\dfrac{20 \, N/m }{80 \, kg} } = \dfrac{1}{2} \, Hz[/tex]
The frequency of resulting oscillation, ω = [tex]\dfrac{1}{2} \, Hz[/tex] = 0.5 Hz
c) The applied force, F = The weight of the bird and the mushroom cap
F = (0.03 kg + 0.05 kg) × 9.81 m/s² = 0.7848 N
[tex]x = \dfrac{0.7848 \, N}{20 \, N/m } = 0.03924 \, m[/tex]
The maximum compression of the mushroom = 0.03924 m
d) The motion of the mushroom is a Simple Harmonic Motion, SHM.
The equation of a SHM as a function of time is; x(t) = A·cos(ω·t + Φ)
For the mushroom, we have;
The amplitude, A = 0.03924 m - 0.024525 m = 0.014715 m
Ф = The phase angle
When t = 0, cos(ω × 0 + Φ) = 1
cos(Φ) = 1
Ф = arcos(1) = 0
The equation is therefore;
x(t) = 0.014715·cos(0.5·t)
Equation of the oscillation of the mushroom is; [tex]\underline{x(t) = 0.014715 \cdot cos(0.5\cdot t)}[/tex]
Learn more here:
https://brainly.com/question/15487931
a certain hydraulic jack is used for lifting load. a force of 250N is applied on a small piston with a diameter of 80cm while the diameter of the larger piston is 2.0m.the applied force moves through a distance of 25cm.calculate the maximum mass of a load that can be lifted by the jack and the distance through which the load is lifted.(take g=9.81ms^-2)
The maximum mass of a load that can be lifted by the jack and the distance covered are:
m = 160.2 Kg
h = 25 cm
Given that a certain hydraulic jack is used for lifting load. a force of 250N is applied on a small piston with a diameter of 80cm while the diameter of the larger piston is 2.0m.
The parameters given are
[tex]F_{1}[/tex] = 250
[tex]A_{1}[/tex] = Area of the small piston = π[tex]r^{2}[/tex]
[tex]A_{1}[/tex] = 22/7 x [tex]0.4^{2}[/tex]
[tex]A_{1}[/tex] = 0.5 [tex]m^{2}[/tex]
[tex]F_{2}[/tex] = ?
[tex]A_{2}[/tex] = Area of the large piston = π[tex]r^{2}[/tex]
[tex]A_{2}[/tex] = π x 1
[tex]A_{2}[/tex] = 3.14 [tex]m^{2}[/tex]
To calculate the force on the large piston, we will use the below formula
[tex]F_{1}[/tex]/ [tex]A_{1}[/tex] = [tex]F_{2}[/tex] / [tex]A_{2}[/tex]
Substitute all the parameters into the equation
250/0.5 = [tex]F_{2}[/tex]/3.14
[tex]F_{2}[/tex] = 1570 N
To calculate the maximum mass of a load that can be lifted by the jack, let us apply Newton second law
F = mg
1570 = 9.8m
m = 1570/9.8
m = 160.2 Kg
.(take g=9.81ms^-2)
If the applied force moves through a distance of 25cm, the distance through which the load is lifted will be
[tex]F_{1}[/tex]/ 0.25[tex]A_{1}[/tex] = [tex]F_{2}[/tex] / [tex]A_{2}[/tex]h
250/0.125 = 1570/3.14h
make h the subject of the formula
6280h = 1570
h = 1570/6280
h = 0.25 m
Therefore, the distance through which the load is lifted is 25 cm
Learn more here: https://brainly.com/question/13596980
Please solve this This is my exam question please be fast
Answer:
OK sure why not!!!!!!!!!!!!
2. Conner flips a coin up in the air (to determine if he or his sister needs to do the dishes) at an upward velocity of 4.00 m/s. He fails to catch it on the way down and it falls down an additional 1.6 m to the floor. Calculate the maximum height and maximum magnitude (could be positive or negative) velocity of the coin.
Answer:
5.6
Explanation:
Not so sure
:)))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
Good morning dear...
Have a beautiful and joyful day ahead.
A grinding wheel is a uniform cylinder with a radius of 8.50 cm and a mass of 0.380 kg. Calculate (a) its moment of inertia about its center, and (b) the applied torque needed to accelerate it from rest to 1750 rpm in 5.00 s. Take into account a frictional torque that has been measured to slow down the wheel from 1500 rpm to rest in 55.0 s.
Hi there!
(A)
A grinding wheel is the same as a disk, having moment of inertia of:
[tex]I = \frac{1}{2}MR^2[/tex]
Plug in the given mass and radius (REMEMBER TO CONVERT) to find the moment of inertia:
[tex]I = \frac{1}{2}(0.380)(0.085)^2 = 0.00137 kgm^2[/tex]
(B)
We can use the rotational equivalent of Newton's Second Law to calculate the needed torque:
Στ = Iα = τ₁ - τ₂
Begin by solving for the angular acceleration. Convert rpm to rad/sec:
[tex]\frac{1750r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 183.26 rad/sec[/tex]
Now, we can use the following equation:
ωf = wi + αt (wi = 0 rad/sec, from rest)
183.26/5 = α = 36.65 rad/sec²
τ = Iα = 0.0503 Nm
Since there is a counter-acting torque on the system, we must begin by finding that acceleration:
[tex]\frac{1500r}{min} * \frac{1 min}{60 s} * \frac{2\pi rad}{1 r} = 157.08 rad/sec[/tex]
ωf = wi + αt
-157.08/55 = α = -2.856 rad/sec²
τ₂ = Iα = 0.0039 Nm
Now, calculate the appropriate torque using the above equation:
[tex]\Sigma\tau = \tau_1 - \tau_2[/tex]
[tex]\Sigma\tau + \tau_2 = \tau_1[/tex]
[tex]0.0503 + 0.0039 = \large\boxed{0.054 Nm}[/tex]
A 67 kg soccer player uses 5100 kJ of energy during a 2.0 h match. What is the
average power produced by the soccer player?
The average power produced by the soccer player is 710 Watts.
Given the data in the question;
Mass of the soccer player; [tex]m = 67kg[/tex]Energy used by the soccer player; [tex]E = 5100KJ = 5100000J[/tex]Time; [tex]t = 2.0h = 7200s[/tex]Power; [tex]P =\ ?[/tex]
Power is simply the amount of energy converted or transferred per unit time. It is expressed as:
[tex]Power = \frac{Energy\ converted }{time}[/tex]
We substitute our given values into the equation
[tex]Power = \frac{5100000J}{7200s}\\\\Power = 708.33J/s \\\\Power = 710J/s \ \ \ \ \ [ 2\ Significant\ Figures]\\\\Power = 710W[/tex]
Therefore, the average power produced by the soccer player is 710 Watts.
Learn more: https://brainly.com/question/20953664