Answer:
1: As the substance’s thermal energy increases, the kinetic energy of its particles increases, and vice versa.
2: Its molecules move around more quickly, so there is more space between them, making it less dense than the air above it.
3: Warmer sauce at the bottom of the pot is less dense, so it rises, forcing cooler sauce down, where it is warmed.
4: Hot soup warms the bowl where it sits.
5: transfer of thermal energy through infrared waves
Explanation:
This is correct for the Thermal Energy Transfer Quick Check
A simmering pot of spaghetti sauce provides an excellent illustration of convection currents because the process of heating the sauce causes hot molecules to rise and cool molecules to sink. This creates a circular motion known as a convection current.
When the pot is placed on a hot stove, the heat from the burner is transferred to the bottom of the pot, which in turn heats the sauce. As the sauce heats up, the molecules nearest to the heat source become hotter and lighter. These hot, lighter molecules rise to the top of the pot, creating a convection current. As they reach the surface, they cool down, become heavier, and then sink back down to the bottom of the pot.
This process of hot molecules rising and cool molecules sinking creates a circular motion that evenly distributes the heat throughout the sauce, ensuring that it cooks evenly. The convection currents in the pot are also responsible for the bubbles that rise to the surface of the sauce, releasing trapped steam and preventing the pot from boiling over.
In conclusion, a simmering pot of spaghetti sauce illustrates convection currents because it shows how hot molecules rise and cool molecules sink, creating a circular motion that evenly distributes heat and ensures that the sauce cooks evenly.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ2
(TCO A) The primary reason for networking standards is to
Student Answer:simplify cost accounting for networks. Make it more difficult to develop hardware and software that link different networks. Ensure that hardware and software produced by different vendors can work together. Ensure that all network components of a particular network can beprovided by only one vendor. Lock customers into buying network components from one vendor
Make sure that software and hardware developed by various manufacturers can cooperate.
What exactly do vendors mean?A vendor is generally anybody who buys and sells goods or services. A vendor purchases products and services to resale them to different companies or individuals. Several different vendors provide the goods that big box stores like Target buy at deep discounts and then resale at higher retail rates.
The five major types of vendors are manufacturers, wholesalers, merchants, services and maintenance providers, independent vendors, and trade show representatives. Suppliers are sometimes referred to as the first link in a supply chain because they exclusively conduct business with other businesses. Contrarily, a vendor is a business or person that purchases things from a company and then sells them to another party.
To learn more about vendors refer to:
brainly.com/question/24852211
#SPJ4
If petroleum used by a power generator is 50 percent efficient and the lines that carry the electricity to a light are 25 percent efficient, what is the energy efficiency of converting the oil into the light
The energy efficiency of converting the oil into the light can be calculated by multiplying the efficiencies of each step in the process.
Calculation-Efficiency = (0.50) * (0.25) = 0.125 or 12.5%
So the energy efficiency of converting petroleum oil into the light is 12.5%. This means that only 12.5% of the energy in the oil is converted into usable light. The rest is lost as heat or other forms of energy during the process.
How effective is the process of turning oil into light overall?How effective is the process of turning oil into light overall? Chemical energy equivalent to 6,000 MJ is found in one barrel of crude oil. An oil-burning power plant can produce 2,000 MJ of energy from a single barrel of crude oil.
to know more about energy efficiency here:
brainly.com/question/28939461
#SPJ4
Complete this sentence. If the cone of force is facing an observer, the impact comes from the ________ side of the observer.
left
same
right
opposite
If the cone of force is facing an observer, the impact comes from the opposite side of the observer.
What is Newton's third law of motion?
Newton's third law of motion states that action and reaction force are equal and opposite. That is for every action, there is an equal and opposite reaction.
Mathematically, the formula for Newton's third law of motion is given as;
Fa = - Fb
where;
Fa is the impact force or force exerted on BFb is the reaction force of B due to applied force of AThus, when a force is applied from a side, the observed force or reaction will be directed in opposite direction. The force exerted and the reaction force are both equal in magnitude but occurs in opposite direction.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
Two particles P and Q are initially at rest 1.64 m apart, P has a mass of 1.43 kg and Q a mass of 4.29 kg. P and Q attract each other with a constant force of 1.79 x 10-2 N. No external forces act on the system. (a) Describe the motion of the center of mass. (b) At what distance from P’s original position do the particles collide?
(a)The center of mass of the system has no acceleration, and remains at the same position as it was earlier.
(b)The particle P, collide at a distance 1.23m from P's original position.
What is acceleration?Vector quantities include accelerations. The direction of the net force imposed on an object determines its acceleration in relation to that force.Acceleration in a body is the result of imbalanced forces.The three main categories of accelerated motions are uniform, non-uniform, and average acceleration. When an item moves in a straight path with an increase in speed occurring at regular intervals of time, this motion is referred to as having uniform acceleration.Any modification of motion's speed or direction is referred to as acceleration. When anything is speeding up, slowing down, or not traveling straight ahead, it is said to be accelerating.To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ4
39) Three different dynamic carts of different masses are rolled down a ramp. The heaviest one rolls down the ramp the fastest. Before concluding that a more massive cart will roll down a ramp faster, what experiment with these three carts might you want to do
According to the given information the answer is Add masses to each car until they have the same mass, then test the carts again.
What is dynamic carts?Features three low friction ball bearing wheels and matched axles to assure their rolling along a true line without deviation to produce accurate data, and a sturdy steel body to endure rigorous handling. Each cart is around 1.5 kg in weight. The ends of the cart lift above the bed to transport a brick or any other bulk, and the cart bed is covered with a rubber pad. At one end of the cart, there is a clip where a tape can be fastened. Each cart's pins fit into the holes in the others, allowing the mass to be doubled by stacking them.
Learn more about Dynamic carts from given link
brainly.com/question/11066593
#SPJ4
The complete question is-
Three different dynamic carts of different masses are rolled down a ramp. The heaviest one rolls down the ramp the fastest. Before concluding that a more massive cart will roll down a ramp faster, what experiment with these three carts might you want to do?
Run an experiment with the ramp at a different angleFind a fourth cart to add to the test, then test againChange the surface of the ramp, then test the carts againAdd masses to each car until they have the same mass, then test the carts againA new way of "multiplying" two vectors is introduced in this chapter. What is it called? Select one: O a. The tensor product. O b. The angular product. Oc. The scalar product. O d. The dot product. O e. The cross product.
The correct option is option e) cross product
The cross-product is a new way of "multiplying" two vectors. It results in a new vector that is perpendicular to both the original vectors and its magnitude is given by the area of the parallelogram formed by the two original vectors.
In three-dimensional space, cross-product is a binary operation on two vectors. It yields a vector perpendicular to both vectors. a b represents the vector product of two vectors, a and b. Its resulting vector is parallel to a and b. Cross goods are another name for vector products.
The cross-product has four basic applications:
calculating the angle () between two vectorsdetermining a vector normal to a planecalculating the moment of a force about a pointcalculating the moment of a force about a line.Read more about Cross-Product from:
https://brainly.com/question/14708608
#SPJ4
Two waves meet while traveling through the same medium. The crests of wave one meet up with the crests of wave two. If wave one has an amplitude of 4 and wave two has an amplitude of 3, what is the amplitude of the wave resulting from the interference
If wave one has an amplitude of 4 and wave two has an amplitude of 3, what is the amplitude of the wave resulting from the interference
Equation Used
The resulting intensity is calculated as follows: I = (sqrt(I1)-sqrt(I2))2
3 variables and 1 function are used in this formula.
Used Functions
Square root function and sqrt (Number)
used variables
The effect of two intensities coming together is called the "resulting intensity" (measured in candela).
The energy that the first wave transfers over a surface of a given area in a unit of time is measured as intensity 1 (measured in candela), which is equal to the energy density times the wave speed.
The energy that the second wave transfers over a surface of a certain area in a unit of time is measured as intensity 2 (measured in candela), which is equal to the energy density times the wave speed.
No conversion is necessary for intensity 1: 4 candela to 4 candela.
Intensity 2: No Conversion Needed 3 Candela to 3 Candela
Replacement of Input Values in a Formula
I is equal to (sqrt(I1)-sqrt(I2))2 --> (sqrt(4)-sqrt(3)).
2 Assessing...…
I = 0.0717967697244909
Candela: 0.0717967697244909 No Conversion Is Necessary
RESULT 0.0717967697244909 A candela Outcome Intensity (Calculation completed in 00.016 seconds)
What is Wave Interference?
When two waves that are moving in opposite directions arrive at the same location simultaneously, interference results. The two waves will combine into a temporary, larger wave with an amplitude equal to the sum of their individual amplitudes if their crests and troughs completely line up. Constructive interference is what this is. On the other hand, if the crests of two waves coincide, they either combine to form a smaller wave or completely cancel each other out. We refer to this as destructive interference.
Learn more about Hand here:
https://brainly.com/question/12762814
#SPJ4
To find the acceleration of a glider moving down a sloping air track, you measure its velocities (V1 and V2) at two points and the time t it takes between them, as follows:V1=0. 21+/- 0. 05m/s, V2=0. 85 +/- 0. 05m/s, t=8. 0 +/- 0. 1sa) Assuming all uncertainties are independent and random, find the average acceleration, a=(v2-v1)/t , and its uncertainty. B) How well does your result in part (a) agree with your friends theoretical prediction that a=0. 13 +/- 0. 01m/s^2
0.08 m/s2 is the average acceleration. The acceleration's degree of uncertainty is 0.0135 m/s2.
Describe acceleration.Accelerations are included in vector quantities. An object's acceleration in relation to a net force is determined by the direction of that force. Force imbalances lead to acceleration in a body.
Uniform, non-uniform, and average acceleration are the three primary types of accelerated motions. It is said to have uniform acceleration when an object moves in a straight line with an increase in speed that happens at regular intervals of time.
Acceleration is the term used to describe any change in the speed or direction of a motion. Anything that is accelerating is moving faster, slower, or in a direction other than straight forward.
To learn more about acceleration visit:
brainly.com/question/12550364
#SPJ4
In a sealed container, Sarah combines a reactant with a mass of 8 grams with another reactant with a mass of 11 grams. After the reaction, what is the most reasonable prediction Sarah can make for the total mass of the products of this reaction?
6g
8g
10g
19g
which one
The most reasonable prediction Sarah can make for the total mass of the products of this reaction would be = 19g.
What is law of conservation of mass?The law of conservation of mass states that mass in neither created nor destroyed but can be changed from one form to another.
From the set up of the reaction carried out by Sarah, the container was in an enclosed medium.
Therefore since there is no loss of mass, the total mass of the products of this reaction would be = 11+8 = 19g.
Learn more about mass here:
https://brainly.com/question/28021242
#SPJ1
Which of the following is an example of erosion in action ?
Example of erosion: Wind carries small pieces of rock away from the side of a mountain.
Which of the following are examples of erosion?Erosion is the procedure by which the surface of the Earth gets worn down. Erosion can be created by natural elements such as erosion as wind and glacial ice. But everyone who has ever seen a picture of the Grand Canyon knows that nothing strikes the erosion slow steady movement of the water when it comes to commuting the Earth
Rain, rivers, floods, lakes, and the ocean convey away bits of soil and sand and slowly wash away the deposit. Rainfall produces four types of soil erosion: splash erosion, sheet erosion, rill erosion, and ravine erosion.
So we can conclude that Erosion is a ruinous force that wears away land features.
Learn more about erosion here: https://brainly.com/question/17905503
#SPJ1
is the electron's speed at f greater than, less than, or equal to its speed at i?
O The electron's speed at f is less than its speed at i. O The electron's speed at f is equal to its speed at i. O The electron's speed at f is greater than its speed at i. O There is not enough data to determine the correct answer.
The correct option is B, The electron's speed at f is equal to its speed at i.
Electrons are subatomic particles that are found in atoms. They are the negatively charged particles that orbit the nucleus of the atom, and they have an extremely small mass. Electrons travel at different speeds depending on their energy level. At their lowest energy level, electrons move at an extremely slow speed, about one thousandth of the speed of light. As the electrons gain energy, their speed increases.
In a vacuum, when electrons have the highest energy level, they can travel at a speed of nearly the speed of light, which is around 186,000 miles per second. In a vacuum, the electrons would have the same speed regardless of their mass. Electrons also move slower inside a material, such as a metal, due to the presence of other atoms. Electrons in metals usually move at a speed of about 1/10th the speed of light. This slower speed is due to the electrons having to pass through energy barriers created by the other atoms in the metal. In general, electrons are very fast particles that can travel at speeds up to nearly the speed of light.
To learn more about Electron's speed visit here:
brainly.com/question/14827627
#SPJ4
A 1000 kg car is travelling at 67 mph. When it reaches a construction zone the driver brakes for 200 m until the car is travelling at 49 mph. What force did the brakes apply to the car? Assume that there are 1609 metres in one mile and give your answer to the nearest thousand. use v^2 =u^2 +(2xAxS) and F=ma
Velocity of moving vehicle=v 0, and decceleration =a and Final velocity of the vehicale =0.
What is Velocity?Once more, the stopping distance is far more than the braking distance. It starts when the threat is identified and concludes when the car stops.
The reaction distance plus the braking distance, or points 1 and 2, together make up the stopping distance.
Therefore, in order to compute the necessary stopping distance, I must determine and add two partial values (reaction distance + brake distance). The reaction time is the amount of time it takes for a driver to spot a danger before braking.
Therefore, Velocity of moving vehicle=v 0, and decceleration =a and Final velocity of the vehicale =0.
To learn more about velocity, refer to the link:
https://brainly.com/question/18084516?
#SPJ1
An ambulance racing down the highway has 14,600,000 J of energy. It is moving 34 m/s. What is the mass of the ambulance? (Round
your answer to two decimal places) KE=1/2mva^2
The ambulance weighs 16.97 tons, and the kinetic energy of an object is given by the formula KE = 1/2mv2, where m is the object's mass, v is its velocity, and KE is the kinetic energy.
What is kinetic energy and above explanation?Kinetic energy is the energy an object possesses due to its motion, and it is calculated as 1/2mv^2, where m is the mass of the object and v is its velocity. It represents the ability of an object to do work by virtue of its motion.Given that the ambulance has 14,600,000 J of energy and is moving at 34 m/s, we can use this formula to find the mass of the ambulance:KE = 1/2mv^214,600,000 J = 1/2m(34 m/s)^2To solve for mass, we can divide both sides of the equation by (1/2)(34 m/s)^2:m = (14,600,000 J) / [(1/2)(34 m/s)^2]m = 14,600,000 J / (1/2)(1156 m^2/s^2)m = 14,600,000 J * (2/1156 m/s^2)m = 16.97 tonSo the mass of the ambulance is approximately 16.97 ton.
To learn more about kinetic energy refer:
brainly.com/question/8101588
#SPJ4
if 15.0 g of water vapour at 135°C cools to 100°C, condenses to liquid water, and then cools to 90°, how much energy is released to the environment?
The heat that is evolved by the environment is 36.42 kJ.
What is the heat that is involved?We know that heat is a form of energy that can be known for the fact that it could lead to a change in the temperature of the object. We have to note that the energy that is released is a sum total of all the process that are involved here.
We know that;
H = (15 * 4.18 * (135 - 100)) + (15 * 2240) + (15 * 4.18 * (100 - 90))
H = 2194.5 + 33600 + 627
H = 36.42 kJ
The total heat that has been evolved would now be 36.42 kJ.
Learn more about heat:https://brainly.com/question/28302909
#SPJ1
The film strip that emerges from the camera is usually a ______________. That is, its color and light values are the opposite of those in the original scene.
The film strip that emerges from the camera is usually a Negative. That is, its color and light values are the opposite of those in the original scene.
What controls how much light enters the camera?One of the three camera settings that affects exposure is the aperture. The shutter speed, aperture, and ISO settings are together referred as as the "exposure triangle." By adjusting the relative amount of light entering a camera lens, an aperture can change the exposure.
What part of the camera and eye controls how much light enters?A camera's shutter can close or open depending on how much light is required to expose the film at the rear of the device.
To know more about camera visit:-
https://brainly.com/question/10944268
#SPJ4
The power required to exert 1 N force, over a distance of 1 m in 1 second is. A) 1 W. B) 2 W. C) 1/3 W. D) 3 W. E) none of these.
Answer:
A) E = 1 N * d = 1 Newton-Meter = 1 Joule
P(ower) = E / t = 1 N-m / t = 1 Joule / sec = 1 W
A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision.
The final velocity of the red-blue carts system is 5 cm/s.
What is the final speed of the two carts after collision?
The final speed of the two carts, that is the red cart and the blue cart system after the collision is calculated by applying the principle of conservation of linear momentum.
Pi = Pf
m₁u₁ + m₂u₂ = v ( m₁ + m₂ )
where;
m₁ is mass of the red cartm₂ is the mass of the blue cartu₁ is initial velocity of the red cartu₂ is the initial velocity of the blue cartv is the final velocity of the two carts after the collisionm₁u₁ + 0 = v ( m₁ + m₂ )
m₁u₁ = v ( m₁ + m₂ )
v = ( m₁u₁ ) / ( m₁ + m₂ )
The final velocity of the red-blue carts system is calculated as;
v = ( 50 kg cm/s ) / ( 5 kg + 5kg )
v = 5 cm/s
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
The complete question is below:
A red cart is moving rightward with a momentum of 50 kg cm/s when it collides with a blue cart of equal mass that is initially at rest. The two carts stick together and move to the right with the same speed after the collision. What is the final velocity of the two carts system after the collision if the mass of the blue cart is 5 kg.
With the Sun and Moon in this position, what does the side of the earth facing the moon experience? ft Select one O A a normal high tide B. a neap high tide C. a spring high tide D. a spring low tide a neap low tide F a normal low tide age
With the Sun and Moon in this position, the side of the earth facing the moon experiences a spring high tide. Thus Option C is the answer.
A spring tide is a tide that occurs when the gravitational pull of the Moon and the Sun are in alignment. During a new moon or full moon phase, the gravitational pull of the Moon and the Sun combine to produce stronger than normal high tides and stronger than normal low tides. The term "spring tide" does not refer to the season of spring, but rather the tide's "springing forth" of water.
During a spring tide, the difference between high tide and low tide is at its greatest, and the water level rises higher and falls lower than during a neap tide. This is because the gravitational pull of the Moon and Sun are working together to produce the tide, rather than against each other. This results in a high tide that is higher than a normal high tide, referred to as a spring high tide.
It is important to note that spring tides occur twice a month, around the time of the new and full moon, when the Moon and Sun are in alignment.
Learn more about Tides:
https://brainly.com/question/29417771
#SPJ4
A 63.0-kg sprinter starts a race with an acceleration of 3.20 m/s2. If the sprinter from the previous problem accelerates at that rate for 20.0 m, and then maintains that velocity for the remainder of the 100.0-m dash, what will be his time for the race
At his current velocity the sprinter will complete the 100.0-m dash in 28.53 s.
What is velocity?
Velocity is a vector quantity that describes the rate of change of an object's position. It is a measure of how fast an object is moving and in what direction. Velocity is measured in units of meters per second (m/s) or miles per hour (mph) and is often represented by the symbol "v".
We can use the equations of motion to calculate the time for the sprinter to complete the race.
First, we can use the equation:
v = u + at
to find the final velocity of the sprinter after accelerating for 20.0 m. Here, u is the initial velocity (which is 0 m/s since the sprinter is at rest at the start of the race), a is the acceleration of 3.20 m/s^2, and t is the time it takes for the sprinter to accelerate for 20.0 m.
v = 0 + (3.20 m/s^2)(t)
We know that the sprinter accelerates for 20.0 m, so we can use the equation:
s = ut + 1/2at^2
to find the time t:
20.0 m = (0 m/s)(t) + 1/2(3.20 m/s^2)(t^2)
t^2 = (20.0 m) * 2 / (3.20 m/s^2) = 12.5
t = sqrt(12.5) = 3.53 s
So the time it takes for the sprinter to accelerate for 20.0 m is 3.53 s.
Next, we can use the equation:
v = d/t
to find the time it takes for the sprinter to cover the remaining 80.0 m of the race at his final velocity. Here, d is the remaining distance of 80.0 m and v is the final velocity found before.
t = d/v = 80.0 m / (3.20 m/s) = 25.0 s
So the time it takes for the sprinter to cover the remaining 80.0 m of the race at his final velocity is 25.0 s
So the total time for the race is the sum of the time it takes to accelerate and the time it takes to cover the remaining distance at a constant velocity:
t = 3.53 s + 25.0 s = 28.53 s
Hence, at his current velocity the sprinter will complete the 100.0-m dash in 28.53 s.
To learn more about velocity from the given link:
https://brainly.com/question/25749514
#SPJ4
The sum of kinetic energy and potential energy
of the particles in a material is blank
The sum of kinetic energy and potential energy of the particles in a material is known as mechanical energy.
What is Kinetic energy?The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
What is potential energy?Due to its position, an object has the ability to store energy. For instance, when a demolition machine's heavy ball is held in an elevated position, it is storing energy. Potential energy is the name for this positional energy that has been stored. Similar to how a drawn bow can store energy due to its posture, There is no energy in the bow while it is in its normal position, or when not drawn. The bow can yet store energy when its position is changed from its normal equilibrium position because of its position. Potential energy is the name for this positional energy that has been stored. Potential energy is the energy of position that a thing has stored inside it.
To know more about Kinetic energy, check out:
https://brainly.com/question/8101588
#SPJ1
Determine the quantity of charge on a plastic tube which has been rubbed with animal fur and gained 3. 8 x 10^9 electrons
The quantity of charge on a plastic tube that has been rubbed with animal fur and gained 3. 8 x 10^9 electrons is The quantity of charge on the plastic tube is 3.8 x 10^9 electrons.
The quantity of charge on the plastic tube is 3.8 x 10^9 electrons. To calculate this value, we can use the equation q = n*e, where q is the charge, n is the number of electrons and e is the elementary charge (1.6 x 10^-19 C). Substituting in the values given, we get q = 3.8 x 10^9 * 1.6 x 10^-19 = 6.08 x 10^-10 C. This means that the plastic tube has gained a charge of 6.08 x 10^-10 Coulombs, which is equivalent to 3.8 x 10^9 electrons.
This can be explained by the process of triboelectricity, which is the transfer of electrons between two materials due to rubbing them together. In this case, the animal fur must have had a higher electron affinity than the plastic, which caused electrons to be transferred from the fur to the plastic tube.
To know more about electrons refer to the link brainly.com/question/1255220
#SPJ4
Suppose the particles in the preceding problem have masses The velocities of the particles are (a) Calculate the angular momentum of each particle about the origin. (b) What is the total angular momentum of the four-particle system about the origin?
Part A: The angular momentum of each particle about the origin
The angular momentum of the first particle is -0.4 kg.m²/s.The angular momentum of the second particle is 0.The angular momentum of the third particle is 1.3 kg.m²/s.The fourth particle's angular momentum is 0.Part B: The total angular momentum of the four-particle system is 0.95 kg.m²/s.
The expression used to calculate angular momentum L is:
L = r x mv
Here, r is the position vector of the object m is the mass and v is the velocity vector.
According to the superposition principle, the resultant angular momentum due to many particles is the vector sum of the individual angular momentum.
L = L₁ + L₂ + L₃ + ...
Here, L₁ is the angular momentum of a particle, L₂ is the angular momentum of the particle, and so on.
In the question
Mass of a particle = 5.0 kg
vector r = (2.0i - 3.0j) m
vector v = (3.0i) m/s
Part A (seen in the picture for instruction)
For particle 1
The position vector is 2.0j m
Substitute 0.10 kg from m₁, 2.0j from r, and 2.0i m/s for v₁ in the expression of angular momentum
L = r x mv
L₁ = (2.0jm) x [(0.10 kg)( 2.0i m/s)]
L₁ = -4.0 kg.m²/s
The angular momentum for the first particle is -4.0 kg.m²/s.
For particle 2
Position vector is (2.0i - 2.0j) m
Substitute 0.20 kg from m₂, (2.0i - 2.0j) m from r, and (3.0i - 3.0j)m/s for v₂ in the expression of angular momentum
L₂ = (2.0i - 2.0j) m x [ (0.20 kg) (3.0i - 3.0j) m/s]
L₂ = 0
The angular momentum for the second particle is 0
For particle 3
The position vector is (-3.0i + 1.0j) m.
Substitute 0.30 kg from m₃, (-3.0i + 1.0j) m from r, and -5.0j m/s for v₃ in the expression of angular momentum
L₃ = (-3.0i + 1.0j) m x [((-3.0i + 1.0j) m) ( -5.0j m/s)]
L₃ = 1.35 kg.m²/s
The angular momentum for three particles is 1.35 kg.m²/s.
For particle 4
The position vector is 4.01i m.
Substitute 0.40 kg from m₄, 4.0i m from r, and -4.0i m/s for v₄ in the expression of angular momentum
L₄ = (4.0i m) x [(0.40 kg) (-4.0i m/s)
L₄ = 0
The angular momentum for four particles is 0.
Part B
Formula used: L = L₁ + L₂ + L₃ + L₄
The total angular momentum of the four-particle system is calculated as follows:
By superposition principle
L = L₁ + L₂ + L₃ + L₄
L = -4.0 kg.m²/s + 0 + 1.35 kg.m²/s + 0
L = 0.95 kg.m²/s
Hence, the total angular momentum of the four-particle system is 0.95 kg.m²/s.
Your question is incomplete but most probably your full question was:
Suppose the particles in the preceding problem have masses m₁ =0.10 kg, m₂=0.20 kg, m₃ = 0.30 kg, m₄ = 0.40 kg. The velocities of the particel are v₁= 2.0i m/s,v₂= (3.0i - 3.0j) m/s, v₃= - 1.5j m/s, v₄= -4i m/s.
(a) Calculate the angular momentum of each particle about the origin.
(b) What is the total angular momentum of the four-particle system about the origin?
Learn more about angular momentum at https://brainly.com/question/4126751
#SPJ4
The length of nylon rope from which a mountain climber is suspended has a force constant of 1.2×104 N/m.
a. What is the frequency, in Hz, at which he bounces, given his mass and the mass of his equipment is 98 kg?
b. How much would this rope stretch, in centimeters, to break the climber's fall if he free-falls 1.8 m before the rope runs out of slack?
c. What is the frequency, in Hz, at which he bounces, given his mass and the mass of his equipment is 98 kg if the rope is twice as long?
d. How much would this rope stretch, in centimeters, to break the climber's fall if he free-falls 1.8 m before the rope runs out of slack if he rope was twice the length?
The length of nylon rope from which a mountain climber is suspended has a force constant of 1.15 ✕ 104 N/m.
What is the force constant measured in?Spring constant is the common name for the force constant. Hooke's law states that F=-kx. k=N/m is used to replace units in the equation where F is force, x is displacement, and k is force constant (spring constant) to determine the SI unit of force constant (spring constant).
What is a graph's force constant?The slope (gradient) of the graph equals the force constant. The proportionality constant, or k, is also known as the force constant in physics. A spring that is more rigid will have a higher value for k. The graph is no longer a straight line beyond point A since the gradient has changed and the formula F = Kx is no longer valid.
Calculation:Maximum speed is at equilibrium where:
F = kx ⇒x =F/k
Now, F x=1/2mv²+1/2kx²
Solving we get,
V=F/√mk=Vmax
To learn more about force constant visit:
brainly.com/question/15170479
#SPJ4
What is the sound level of rustling of leaves?
The sound level of rusting leaves is 20db.
Rustle is a quiet, muted cracking sound made when dry paper or leaves are moved. The movement of weak objects, like the leaves, produces a gentle sound. Ruffle would be the appropriate response because "leaves" is the noun in the sentence.
Over time, so many people have been mesmerized by the sounds of wind in the trees and the rustling of leaves, that they came up with the term "psithurism" to describe them. Psithurism has a silent first "p," like many other words that start with "ps," and is pronounced sith-err-iz-um.
We sometimes refer to a wind that is howling when it is strong and noisy: The trees shook as the wind howled.
To learn more about Sound level from given link
https://brainly.com/question/30160873
#SPJ4
Now let's think about a balloon. We know the gas particles inside of the balloon are bumping against the sides. What keeps those gas particles from forcing the balloon to expand
The elasticity of the balloon's material keeps the 1particles from forcing it to expand. The material stretches as the gas particles bump against the sides, allowing the balloon to expand to a certain point before contracting again.
The elasticity of the balloon's material is an important factor in determining the balloon's shape and size. In general, the more elastic the material is, the more the balloon will be able to stretch and expand. When the material is not elastic enough, it will not be able to stretch and the balloon will remain in its original shape.
The elasticity of the material also affects the amount of air pressure within the balloon. A more elastic material will be able to hold more air pressure, while a less elastic material will not be able to hold as much pressure. This is why balloons with a higher pressure will usually be larger than balloons with a lower pressure.
Learn more about gas particles from a balloon to:
https://brainly.com/question/6751115
#SPJ4
The doctor lands his tardis on a planet whose radius is 1. 2x10^7m the acceleration due to gravity is 18m/s^2. What is the mass of the planet
The mass of planet is 3.886×10^25 kg. The radius of planet is 1. 2x10^7m.
What is a planet with half the mass's acceleration caused by gravity?Complete Resolution. If the acceleration caused by gravity on the surface of the earth is given by the formula g, then the acceleration caused by gravity on a planet with a mass half that of the earth and a radius equal to that of the earth is given by the formula g/2. Where G = 6.67 ×10^-11 N m2/kg2 (Newton's gravitational constant).
Is the explanation for the gravitational acceleration independent of mass?As a result, acceleration due to gravity (a) depends on the gravitational constant (G), the mass of the Earth (M), and the radius of the Earth (R), but not on the mass of the body (m).
Given:
Radius of planet (r) = 1. 2x10^7m
Acceleration due to gravity (g) = 18 m/s^2
The acceleration due to gravity at the surface of the planet is,
[tex]g=G\frac{M}{r^2}[/tex]
Where, G = Universal gravitational constant
[tex]G= 6.67*10^-11N.m^2/kg^2[/tex]
[tex]M=\frac{g*r^2}{G}[/tex]
[tex]M=\frac{18*(1.2*10^7)^2}{6.67*10^-11}[/tex]
M =3.886×10^25 kg
To know more about gravitational acceleration visit:
https://brainly.com/question/14374981
#SPJ4
If hydrogen gives off 10 units of energy, but takes 15 units of energy to produce, what is its net energy ratio
The net energy ratio of hydrogen is 0.67.
What is net energy ratio?The net energy ratio, also known as energy return on investment (EROI), is a measure of the efficiency of a fuel source or energy system. It represents the ratio of the energy output to the energy input, or the amount of energy that is produced compared to the amount of energy that is required to produce it.
A net energy ratio of 1 means that the energy output is equal to the energy input, and that no net energy is produced.
In the case of hydrogen, it gives off 10 units of energy but takes 15 units of energy to produce, so the net energy ratio would be:
Energy output / Energy input = 10 units / 15 units = 0.67
Hence, the net energy ratio of hydrogen is 0.67. This means that for every 1 unit of energy put into producing hydrogen, only 0.67 units of energy are obtained.
To learn more about hydrogen from the given link:
https://brainly.com/question/28937951
#SPJ4
Frank is pulling on a rope to drag his backpack to school across the ice. He pulls upwards and rightwards with a force of 26.7 Newtons at an angle of 17 degrees above the horizontal to drag his backpack a horizontal distance of 129 meters to the right. Determine the work done upon the backpack. in joules.
The work done upon the backpack is 3293 Joule.
What is force?
The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
The work done upon the backpack is = applied force × displacement × cosα
= 26.7 N × 129 meters × cos17°
= 3293 Joule.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
The same amount of steel used to create eight solid steel balls, each with a radius of 1 inch, is used to create one larger steel ball. What is the radius of the larger ball
Answer:
2 inches
Explanation:
Volume of a sphere = 4/3 pi r^3
for the EIGHT balls total volume = 8 * 4/3 pi (1^3) = 32/3 pi
This is the volume of the made-up ONE ball
4/3 pi r^3 = 32/3 pi
4/3 r^3 = 32/3
r^3 = 32/3 * 3/4
r^3 = 8
r = 2 inches
The image below shows the combined wave for Sound A + B, where Sound A has a higher frequency than Sound B. What is the frequency of Sound A?
The frequency of Sound A is 440.3 Hz.
What is the resultant frequency of the two sound waves?The resultant frequency of the sound A and sound B is calculated as follows;
Mathematically, the relationship between period and frequency of a wave is given as;
F = 1 / T
where;
T is the period of the waveThe resultant frequency from the given graph is calculated as;
The period of the sound in the image = 0.3 s
F = 1 / T
F = 1 / 0.3 s
F = 3.3 Hz
If sound B = 437 Hz, the frequency of sound A which is greater is calculated as;
F ( A ) = 437 Hz + 3.3 Hz
F ( A ) = 440.3 Hz
Learn more about frequency here: https://brainly.com/question/26146342
#SPJ1