How many liters of. 225 M Na2S solution would be required to react completely with 81. 8 g Fe(C2H3O2)3? (The molar mass of iron (III) acetate is 233. 00 g/mol. )

Atoms are basically the smallest units of matter. They are made up of  protons, neutrons and electrons.

The periodic table is a tabular arrangement of the chemical elements which are organized on the basis of their atomic numbers, electron configurations, and recurring chemical properties. The periodic table lists the elements in order of increasing atomic number and grouped into rows (periods) and columns (groups). The elements in the same column have similar chemical properties, with the elements in the same row having similar outer electron configurations.

Atom X: Number of protons = 6

Atom Y: Number of protons = 6

b. Atoms X and Atom Y are in the same family; but not the same row; in the periodic table.

Hence, Option B is correct.

To know more about periodic table, visit:

brainly.com/question/15987580

#SPJ4

The question is:

Question 3 (5 points) (02.06 MC) The table compares some characteristics of two atoms_ Charged Particles Atom Number 0f Neutrons Mass Number] Use the table t0 determine the number of protons for each atom: Then_ choose the statement below that Is true about the two atoms_ points) Atom X and Atom are in the same row; but not the same family; on the periodic table Atoms X and Atom Y are in the same family; but not the same row; in the periodic table; Atom Xis in a column to the right of Atom Y in the periodic table: Atom X and Atom occupy the same position in the periodic table because they are isotopes.

Answer:

joules.

Explanation:

A measure of the total internal heat content.

which could be exothermic or endothermic

Answer:

4g of hydrogen

Explanation:

4g of hydrogen (molar mass 2) corresponds to 2 moles of molecules or 4N number of atoms where N is the Avogadro's number (6.023×10

23)

3.88 grams of sodium azide are required to form 5.00 g of nitrogen gas.

In order to determine how many grams of sodium azide are required to form 5.00 g of nitrogen gas, we can use the balanced equation for the reaction:

2NaN3 (s) → 2Na (s) + 3N2 (g)

We can start by converting the given amount of nitrogen gas to moles:

5.00 g N2 x (1 mol N2 / 28.00 g N2) = 0.1786 mol N2

We know that the reaction produces 3 moles of N2 for every 2 moles of NaN3 that are used, so we can use the following ratio to find the number of moles of NaN3 required:

0.1786 mol N2 / 3 mol N2 = 0.0596 mol NaN3

Finally, we can convert moles of NaN3 back to grams using the molar mass of NaN3:

0.0596 mol NaN3 x (64.99 g NaN3 / 1 mol NaN3) = 3.88 g NaN3

So, 3.88 grams of sodium azide are required to form 5.00 g of nitrogen gas.

Learn more about Balanced Equations here: https://brainly.com/question/12192253

#SPJ4

During glycolysis, each G3P produces two ATP, for a total of four ATP per glucose molecule.

The metabolic mechanism that transforms glucose to pyruvate is known as glycolysis. This free energy is utilized to create the high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide. Glycolysis is a series of 10 enzyme-catalyzed processes. The initial stage in the breakdown of glucose to extract energy for cellular metabolism is glycolysis. Glycolysis is divided into two phases: energy-requiring and energy-releasing. Glycolysis is the process of breaking down glucose to create energy. It generates two pyruvate molecules, ATP, NADH, and water. The process occurs in a cell's cytoplasm and does not require oxygen. It can be found in aerobic and anaerobic organisms.

Here,

Each G3P produces two ATP during glycolysis, for a total of four ATP per glucose molecule.

To know more about glycolysis,

https://brainly.com/question/14076989

#SPJ4

Design extra reinforcements in the building's windows so that they can withstand the vibrations from sonic booms.

What are Sonic booms?

Sonic booms are shock waves created when an object, such as an aircraft or spacecraft, travels through the air at a speed faster than the speed of sound (approximately 767 mph). Sonic booms generate a loud noise that can be heard over long distances. Sonic booms can cause property damage and are hazardous to people's hearing.

Extra reinforcements in the building's windows can help to absorb the shock of sonic booms. This is done by adding additional layers of materials such as glass, plastic, rubber, or metal to the window frame. These materials will help to dampen the vibrations from sonic booms, reducing the noise and preventing damage to the windows. Additionally, window seals can be installed to reduce air infiltration, further helping to protect the windows from the vibrations of sonic booms.

Hence, Option C is correct.

To know more about Sonic booms,

https://brainly.com/question/3172656

#SPJ4

Answer:

Stomata

Explanation:

Stomata are epithelial cell structures found in tree leaves and needles that help promote plant growth and exchange carbon dioxide and water with the surrounding environment.

Stomata are tiny holes in the epidermis of leaves.

Stomata allow for gaseous exchange as well (oxygen and carbon dioxide).

A 10.150 grams sample of a compound containing only phosphorus and oxygen which indicates a phosphorus content of 4.433 grams has the empirical formula P₂O₅.

An Empirical formula is defined as the simplest whole number ratio of different atoms present in the molecule of a compound.

given,

mass of the unknown compound= 10.150 g

mass of phosphorus= 4.433 g

therefore, mass of oxygen

=mass of the unknown compound -  mass of phosphorus

=10.150-4.433 g

=5.717 g

we know that

molar mass of oxygen = 16 g/mol

molar mass of phosphorus = 31 g/mol

number of moles of oxygen

=mass/molar mass

=5.717g/16gmol⁻¹

=0.357

number of moles of phosphorus

= mass/molar mass

= 4.433g/31gmol⁻¹

=0.143

Now, we will divide the moles by the smallest number of moles (0.143)

O= 0.357 / 0.143 =2.49≈ 2.5

P= 0.143 /0.143 = 1

now, we will multiply both numbers by 2 to get the simplest whole number ratio

O= 2.5×2= 5

P= 1×2= 2

Thus, the empirical formula is P₂O₅.

To know more about empirical formula here

https://brainly.com/question/12239025

#SPJ4

In addition to respiration, a process known as guttation involves the loss of liquid water from a plant's healthy leaf or stem, mostly through water stomata.

The physiological loss of water . water of water vapor, mostly from the stomata of leaves, but also by evaporation first from surfaces of leaf tissue, flowers, and stems, is known as transpiration.

Additionally, by providing evaporative cooling, vegetation transpiration makes a major contribution to the energy balance of the leaf. Additionally, transpiration speeds up the movement of nutrients and water from roots to the shoots. Transpiration occurs when water vapor leaves a plant through the stomata.

To know more about Transpiration visit:

https://brainly.com/question/13891305

#SPJ1

4.21 moles of SnO₂ are needed to produce 500.0 grams of Sn for the given reaction.

Tin oxide, is a compound with the formula SnO₂. It is a white or gray powder that is insoluble in water but soluble in strong acids and strong alkalis. Tin oxide is widely used as a pigment in ceramics, glasses, and paints, and in the manufacture of electronic devices such as transistors and solar cells. It is a versatile compound with a wide range of uses and can undergo several important reactions such as: Reduction to tin metal, formation of tin dioxide, formation of tin salts by reaction with acids.

For the given reaction:

SnO₂ + 2H₂ → Sn + 2H₂O

Mole ratio of SnO₂ and Sn is 1:1; this means 1 mole of SnO₂ is required to prepare each mole of Sn.

Now, for the moles of Sn:

n = m/M

Where, n = number of moles

m = mass of Sn (500 g)

M = molar mass of Sn (118.71 g/mol)

n = 500/118.71

n = 4.21 moles

To know more about Tin oxide (SnO₂), visit:

https://brainly.com/question/15384792

#SPJ4

The acceleration of the mass is 8.0 m/s² when an unbalanced 16.0 N force is applied to a 2.0 kg mass.

To calculate the acceleration of the mass, we can use Newton's second law of motion, which states that the force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma).

We know that the force acting on the object is 16.0 N, and the mass of the object is 2.0 kg. So, we can use the equation to solve for the acceleration:

a = F ÷ m

where, a = acceleration, F = force (16.0 N), m = mass (2.0 kg)

So,

a = 16.0 N ÷ 2.0 kg = 8.0 m/s²

Therefore, the acceleration of the mass is 8.0 m/s²

Learn more about acceleration:

https://brainly.com/question/3046924

Answer:

a process where the products released in one reaction are the stimuli and reactants for another reaction

Explanation:

A chemical reaction is described as a process in which the products promote or spread the reaction, which may accelerate dramatically under certain conditions.

Answer: chain reaction

Explanation: a chain reaction is a series of chemical reactions where the products of the reaction contribute to the reactants of another reaction. as a series of events that are each caused by the previous event. If a trash can falls over and this scares a cat who then jumps and knocks over a glass of water, thats a chain reaction. The trash can fall is the initial event, and the end result is the glass getting knocked over.

The weight of the book in kilograms is 0.498Kg.

A body's bulk is an innate characteristic. It was widely believed to be related to the volume of matter in a physical body prior to the discovery of the atom and particle physics.

You can work on a level surface provided by the book.

will eventually add more weights. It is distinctive in its own way. The mass must be measured.

the account balance to 0 the scale with the book on it. Weigh the object down to the nearest gram (1 g). 498g In this experiment, all masses will be measured in kilograms. the books weigh 0.498 kg in kilograms.

Learn more about mass.

brainly.com/question/18064917

#SPJ4

KI - Ionic compound,  KCl - Ionic compound,

C₆H₁₂O₆ - Covalent compound, KNO₃ - Ionic compound,

C₆H₄Cl₂ - Covalent compound, C₆H₅COOH - Covalent compound

CH₃COOH - Covalent compound, Parafin wax - Covalent

HCl - Covalent compound

Ionic compounds can be classified as compounds formed between cation ions and an anion. A cation can be described as an electropositive ion and has the tendency to donate valence electrons. Similarly, anions are electronegative ions and have a tendency to accept electrons.

In an ionic compound, an ionic bond contains the complete transfer of electrons, therefore, there exists an electrostatic force of attraction that forms a strong bond.

In a covalent compound, the covalent bond exhibits the mutual sharing of electrons. Shared pairs of electrons are hard to give away as nuclei of two chemical elements together share the electrons and produce a bond stronger.

Learn more about the ionic and covalent compound, here:

brainly.com/question/12144907

#SPJ1

The boiling point will be lower, because water boils when its vapor pressure is equal to atmospheric pressure.

Atmospheric pressure is described as the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer.

If you are at 8 000 m above sea level, the air pressure is lower than one atmosphere and the equilibrium between the water and air pressures will be reached before.

In conclusion, Atmospheric pressure is caused by the weight of the air molecules above.

Learn more about Atmospheric pressure at: https://brainly.com/question/19587559

#SPJ1

The boiling point of water at 8000m above sea level where air pressure is lower would be significantly lower.

The boiling point of water decreases as the air pressure decreases. At an altitude of 8000 meters above sea level, the air pressure is significantly lower than it is at sea level, so the boiling point of water would also be significantly lower.

At sea level, the normal boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at a standard atmospheric pressure of 101.3 kPa. As the altitude increases, the atmospheric pressure decreases, so the boiling point of water decreases as well.

Find out more on boiling point of water at https://brainly.com/question/18188829

#SPJ1

With 3.11 grams of sodium chloride we should start to make an aqueous solution of 50. 0 gm.

When water is used as a solvent then the solution is called the aqueous solution. Water is a good solvent which is naturally abundant and in chemistry, the word "solution" refers to the aqueous solution unless the solvent is specified. It is denoted by "aq".

Mass of aqueous solution = 50 gm

Mass percentage of sodium chloride = 6.213%

Let the mass of sodium chloride is N grams, then,

N = (50/100) × 6.213 gm

N = 0.5 × 6.213

N = 3.11 grams

To know more about sodium chloride, here

https://brainly.com/question/30021413

#SPJ4

The ratio of the container with PHe: PAr will be given as= 12.2/1

To know more about pressure here

https://brainly.com/question/22264785

#SPJ4

The ratio of PHe: PAr will be given as= 12.2/1

All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), geodetic component (g, z) and dynamic pressure (pdyn), that exist in a fluid along with a stream line in a frictionless flow. The pascal (Pa), often known as kilograms per square meter per second (kg/m1s2), is the SI unit of pressure. Before 1971, pressure in SI was expressed in terms of newtons per square meter. You have static pressure, while a fluid is stationary or when you are moving with it. You would feel an equal amount of air pressure from all the sides.

To know more about pressure here

https://brainly.com/question/12971272

#SPJ4

Newton's law of motion that act upon the vehicles at the point of impact is the second law of motion.

Newton's second law of motion states that the force applied to an object is directly proportional to the rate of change of momentum that is produced. Mathematically, we have;

F = m·v - m·u/Δt

Where;

m = The mass of the object

v = The final velocity of the object

u = The initial velocity of the object

Δt = The duration of motion of the object during change in velocity

Therefore, given that the mass, 'M', of the truck is larger than the mass, 'm', of the minivan, where the time of change in velocity Δt, and the initial and final velocities of both automobiles are the same such as in a sudden stop, the garbage ruck will exert more force than the minivan, and therefore, the garbage truck has a greater initial momentum before the automobiles are brought to a stop.

To learn more about momentum check the link below:

https://brainly.com/question/25849204

#SPJ4

As the number of carbon atoms increases the phase changes from gas to liquid,length of chain increases and also the boiling point increases in case of alkanes, alkenes, and alkynes.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

A meterstick is used to measure things in meters and centimeters.

Meterstick is the measurement tool that measures one meter (hundred centimeters) and is used to measure the things in meters and centimeters. Metersticks are often rectangular and tin, and it is made up of wood or metal. Metal ones are often backed with a 'grippy' material such as cork, to improve the friction. Metersticks are usually divided within the lines for each millimeter (1000 per meter) and the numerical markings as per centimeter (100 per meter), with the numbers either in centi- or millimeter. It is a large ruler used for measuring the size or the distance using the metric scale.

To now more about distance here

https://brainly.com/question/15172156

#SPJ4

Answer:ne

Explanation:

On this scenario, the US may consume more than its PPC by specializing in cheese and swapping it for Italian tomatoes.

Italy’s cheese output is lower than that of the United States.Italy cannot consume cheese other than PPC unless these products are supplied by another nation. Through an exchange deal with Italy, the United States can enjoy tomatoes in addition to PPC. Because cheese production in the United States is substantially higher than in Italy, we may assume that the United States can offer this commodity to other nations without jeopardizing its consumption. However, tomato output in the United States is the same as in Italy, but because the United States is a larger country than Italy, tomato consumption in the country may be affected.

As a result, if tomatoes are obtained from another nation, tomato consumption in the United States may surpass the PPC of tomatoes. This may be accomplished through barter, with the United States supplying cheese to Italy and Italy supplying tomatoes to the United States.

To learn more about PPC to refer:

https://brainly.com/question/16969732

#SPJ1

The methods used to monitor a reaction as it occurs in the reaction flask are d) all the above

A polarimeter is an analytical hardware component that measures the polarization of light and is used to analyze the optical activity of chemicals. Optical activity refers to the ability of a material to rotate polarized light and the extent to which such a phenomenon occurs.

A spectrometer is one of the scientific instrument/method used to separate and measure the spectral components of physical phenomena. A spectrometer is a broad term often used to describe an instrument that measures a continuous variable of a phenomenon whose spectral components are mixed in some way.

Learn more about the reaction flask in

https://brainly.com/question/23822902

#SPJ4

The number of coffee cups that would be required to fill the enormous coffee cup would be 32 cups.

The world's largest cup of coffee can hold 2010 gallons of coffee as recorded in Las Vegas.

A normal coffee cup will only hold as much as 237 mL of coffee. Recall that:

If 1 gallon = 3.78541 L

  2010 gallons = 2010 x 3.78541

                         = 7608.6741 L

In other words, the coffee cup with the record size will hold a maximum of 7608.6741 L of coffee while a normal coffee cup will only hold 237 mL. The problem now is the number of number coffee cups that will fill the world's record largest coffee.

7608.6741/237 = 32.10

Therefore, the number of normal coffee cups that would be required to fill the enormous coffee cup would be approximately 32 cups.

More on dimensional analysis can be found here: https://brainly.com/question/13078117

#SPJ1

Almost all of the oxygen (O2) one consumes in breathing is converted to: b. carbon dioxide (CO2).

When we breathe in oxygen, it is used in cellular respiration, which is the process by which our body converts glucose and oxygen into energy in the form of ATP. In the process, the oxygen is combined with the hydrogen atoms from glucose to form water, and the carbon atoms from glucose are converted to carbon dioxide (CO2) as a waste product. Therefore, almost all of the oxygen that one consumes in breathing is converted to carbon dioxide (CO2).Breathing is the process by which an organism takes in oxygen and expels carbon dioxide. In humans and other mammals, this process is accomplished through the respiratory system, which includes the nose, trachea, bronchi, and lungs. When we inhale, air is drawn into the lungs through the nose or mouth, passing through the trachea and bronchi before reaching the alveoli, which are small air sacs in the lungs where gas exchange occurs.

To learn more about oxygen (O2) here:

https://brainly.com/question/9714175

#SPJ4

The limiting reactant, O₂, forms 2.7 mole Al₂O₃. Therefore, the mass of Al₂O₃ is 280 g.

The term mole (M) is defined as the amount of substance in a system which include as many elementary entities as there are atoms present in it. It is denoted by the symbol “mol”. The word mole is coming from the Latin word moles, which means “a mass”.

Molar Mass of Al₂O₃ = 101.96 g/mol

2.7 mole Al₂O₃          101.96 g

------------------------  x  -------------------    

             X                       1 mole

= 280 g Al₂O₃

Thus, The limiting reactant, O₂, forms 2.7 mole Al₂O₃. Therefore, the mass of Al₂O₃ is 280 g.

To learn more about the mole, follow the link;

https://brainly.com/question/26416088

#SPJ1

The amount of heat involved per gram of potato chip burned is 8388J when a 75g of a potato chip are burned in a calorimeter that contains 2L of water initially at 297K.

Given mass of potato chips burned = 75g

Mass of water (m) = 2L = 2000g

Initial temperature (T1) = 297K - 273 = 24oC.

Final temperature after combustion (T2) = 12oC

We know that q = mC∆T where q is heat and C is specific heat of water =  4.2J/g/oC.

q = 2000 x 4.2 x (24-12)

q = 8388J

Hence the heat evolved per gram of potato chip burned is 8388J

To learn more about heat click here https://brainly.com/question/21041726

#SPJ4

Answer:

Whereas ionic bonds join metals to non-metals, metallic bonding joins a bulk of metal atoms.

Explanation:

hope this helps

P4O10(s) + H2O(l) --> H3PO4(aq)

Learn more about Phosphoric acid here:

https://brainly.com/question/15867951

#SPJ4

Some examples of evidence that support Darwin's theories of evolution and natural selection , such as fossils and similarities between related living organisms.

Darwin employed certain sorts of evidence to support his hypothesis of natural selection, and these types of evidence are still used today. Examples include fossils and similarities between related living animals. Others, like DNA analysis, were unavailable to Darwin's generation but are now employed by scientists to further our understanding of evolution.  evidence supporting evolution: fossil strata, remains of extinct organisms, similarities between current-day organisms, DNA similarities, and embryonic similarity. Artificial selection, or breeding, is a crucial sort of evidence that Darwin looked at and is being looked at and employed today.

Learn more about  Darwin's theories of evolution .

brainly.com/question/25718754

#SPJ4