How many moles are in 10 g aspartame?

The amount of heat involved per gram of potato chip burned is 8388J when a 75g of a potato chip are burned in a calorimeter that contains 2L of water initially at 297K.

Given mass of potato chips burned = 75g

Mass of water (m) = 2L = 2000g

Initial temperature (T1) = 297K - 273 = 24oC.

Final temperature after combustion (T2) = 12oC

We know that q = mC∆T where q is heat and C is specific heat of water =  4.2J/g/oC.

q = 2000 x 4.2 x (24-12)

q = 8388J

Hence the heat evolved per gram of potato chip burned is 8388J

To learn more about heat click here https://brainly.com/question/21041726

#SPJ4

A 10.150 grams sample of a compound containing only phosphorus and oxygen which indicates a phosphorus content of 4.433 grams has the empirical formula P₂O₅.

An Empirical formula is defined as the simplest whole number ratio of different atoms present in the molecule of a compound.

given,

mass of the unknown compound= 10.150 g

mass of phosphorus= 4.433 g

therefore, mass of oxygen

=mass of the unknown compound -  mass of phosphorus

=10.150-4.433 g

=5.717 g

we know that

molar mass of oxygen = 16 g/mol

molar mass of phosphorus = 31 g/mol

number of moles of oxygen

=mass/molar mass

=5.717g/16gmol⁻¹

=0.357

number of moles of phosphorus

= mass/molar mass

= 4.433g/31gmol⁻¹

=0.143

Now, we will divide the moles by the smallest number of moles (0.143)

O= 0.357 / 0.143 =2.49≈ 2.5

P= 0.143 /0.143 = 1

now, we will multiply both numbers by 2 to get the simplest whole number ratio

O= 2.5×2= 5

P= 1×2= 2

Thus, the empirical formula is P₂O₅.

To know more about empirical formula here

https://brainly.com/question/12239025

#SPJ4

A bleaching solution requires 6. 55 g of sodium hypochlorite. 30.47 grams of a 21. 5% by mass solution of sodium hypochlorite should be used

Mass of sodium hypochlorite = 6.55 g

percent composition = 21. 5%

This indicates that there are 21.5 grams of sodium hypochlorite present in every one hundred grams of solution.

Now calculate the number of grams of solution for 6.55 g of solution.

(6.55 g x 100) / 21.5 g = 30.47 g

Therefore, you will need 30.47 grams of a sodium hypochlorite solution that has a mass concentration of 21.5% in order to obtain 6.55 grams of sodium hypochlorite.

You can also learn about percent composition from the following question:

https://brainly.com/question/17505281

#SPJ4

0.002 liters of 225 M Na2S solution is required to completely react with 81.8 g Fe(C2H3O2)3

Starting from the balanced equation of the reaction and the molar mass of iron (III) acetate (Fe(C2H3O2)3, first the reacting moles of this compound are determined, then the amount of reacting moles of sodium sulfide (Na2S) is determined and finally the amount of solution that contains said amount of moles.

3Na2S + 2Fe(C2H3O2)3 → 6NaC2H3O2 + Fe2S3

This determination is made in three steps:

If 233.00 g of Fe(C2H3O2)3 is equivalent to 1 mol of Fe(C2H3O2)3

So 81. 8 g Fe(C2H3O2)3 equals x mol of Fe(C2H3O2)3

X mol of Fe(C2H3O2)3 = 81. 8 g Fe(C2H3O2)3 x 1 mol of Fe(C2H3O2)3 / 233.00 g of Fe(C2H3O2)3

X mol of Fe(C2H3O2)3 = 0.351 mol

If 2 moles of Fe(C2H3O2)3 react with 3 moles of Na2S

Then 0.351 mol of Fe(C2H3O2)3 reacts with x mol of Na2S

X mol of Na2S = 0.351 mol Fe(C2H3O2)3 x 3 mol of Na2S / 2 mol of Fe(C2H3O2)3 = 0.526 mol

If there are 225 moles of Na2S in 1 liter of solution

So there are 0.526 moles of Na2S in x liter of solution.

X liter of solution = 0.526 mol of Na2S x 1 liter of solution / 225 mol of Na2S = 0.0023 liters, that is, 2.3 ml

Therefore, 0.0023 liters of 225M Na2S solution is required.

Learn more about required liters of Na2S solution at https://brainly.com/question/24185902

#SPJ4

Whenever the meter stick stood by itself, two forces were acting on it: some upward pressure of the fulcrum as well as the descending gravity force.

To demonstrate that the resultant force was zero when the metre stick has been in equilibrium, you must balance forces acting on it in the first section. To figure out the mass of the meter stick, you should balance the metre stick's weight against with a known weight inside the second section.

In the event that the ruler was balanced, the support which it is resting applies a force equal in strength to that of the weight's opposite force. Therefore, the ruler is being acted upon by its weight as well as the friction coefficient somewhere at support.

To know more about meter stick

https://brainly.com/question/15298079

#SPJ4

With 3.11 grams of sodium chloride we should start to make an aqueous solution of 50. 0 gm.

When water is used as a solvent then the solution is called the aqueous solution. Water is a good solvent which is naturally abundant and in chemistry, the word "solution" refers to the aqueous solution unless the solvent is specified. It is denoted by "aq".

Mass of aqueous solution = 50 gm

Mass percentage of sodium chloride = 6.213%

Let the mass of sodium chloride is N grams, then,

N = (50/100) × 6.213 gm

N = 0.5 × 6.213

N = 3.11 grams

To know more about sodium chloride, here

https://brainly.com/question/30021413

#SPJ4

The overall charge of an atom or ion is negative if the number of electrons is greater than the number of protons.

A subatomic particle with a negative charge is called an electron. It is found outside the nucleus of an atom and is one of the main constituents of matter. Electrons are responsible for the chemical properties of atoms and thus play an important role in chemical reactions. Electrons have low mass and move around the nucleus at relativistic speeds. They are also responsible for the electrical and magnetic properties of atoms, and for the transmission of light and other forms of energy. Electrons can also interact with other particles and form complex structures, such as molecules.

To learn more about electron
https://brainly.com/question/26084288
#SPJ4

The weight of the book in kilograms is 0.498Kg.

A body's bulk is an innate characteristic. It was widely believed to be related to the volume of matter in a physical body prior to the discovery of the atom and particle physics.

You can work on a level surface provided by the book.

will eventually add more weights. It is distinctive in its own way. The mass must be measured.

the account balance to 0 the scale with the book on it. Weigh the object down to the nearest gram (1 g). 498g In this experiment, all masses will be measured in kilograms. the books weigh 0.498 kg in kilograms.

Learn more about mass.

brainly.com/question/18064917

#SPJ4

In the E2 mechanism, the rate of the reaction is affected by the strength of the bond between the leaving group and the carbon atom, as well as the stability of the resulting carbocation intermediate.

The order of the leaving groups in terms of increasing reaction rate would be:

Slowest: R-F

R-F is a relatively weak bond and the fluoride ion is a very poor leaving group, so the reaction rate would be slow.

R-Br

R-Cl

R-I

Fastest: R-I

R-I is a relatively strong bond and the iodide ion is a very good leaving group, so the reaction rate would be fastest.

R-Cl

R-Br

In short, the stability of the leaving group decreases as the atomic number of the atom increases, and the bond dissociation energy of the leaving group also decreases. So, it is Iodide>Chloride>Bromide>Fluoride.

Learn more about leaving group here:

https://brainly.com/question/28014622

#SPJ4

On this scenario, the US may consume more than its PPC by specializing in cheese and swapping it for Italian tomatoes.

Italy’s cheese output is lower than that of the United States.Italy cannot consume cheese other than PPC unless these products are supplied by another nation. Through an exchange deal with Italy, the United States can enjoy tomatoes in addition to PPC. Because cheese production in the United States is substantially higher than in Italy, we may assume that the United States can offer this commodity to other nations without jeopardizing its consumption. However, tomato output in the United States is the same as in Italy, but because the United States is a larger country than Italy, tomato consumption in the country may be affected.

As a result, if tomatoes are obtained from another nation, tomato consumption in the United States may surpass the PPC of tomatoes. This may be accomplished through barter, with the United States supplying cheese to Italy and Italy supplying tomatoes to the United States.

To learn more about PPC to refer:

https://brainly.com/question/16969732

#SPJ1

Design extra reinforcements in the building's windows so that they can withstand the vibrations from sonic booms.

What are Sonic booms?

Sonic booms are shock waves created when an object, such as an aircraft or spacecraft, travels through the air at a speed faster than the speed of sound (approximately 767 mph). Sonic booms generate a loud noise that can be heard over long distances. Sonic booms can cause property damage and are hazardous to people's hearing.

Extra reinforcements in the building's windows can help to absorb the shock of sonic booms. This is done by adding additional layers of materials such as glass, plastic, rubber, or metal to the window frame. These materials will help to dampen the vibrations from sonic booms, reducing the noise and preventing damage to the windows. Additionally, window seals can be installed to reduce air infiltration, further helping to protect the windows from the vibrations of sonic booms.

Hence, Option C is correct.

To know more about Sonic booms,

https://brainly.com/question/3172656

#SPJ4

There are 6.022 x 10^23 atoms in 2 moles of oxygen atoms. There are 2 x 6.022 x 10^23 atoms in 2 moles of oxygen molecules.

Molecules are the smallest particles of a substance that can exist on its own and retain the chemical properties of that substance. Molecules are composed of atoms that are held together by chemical bonds. Molecules can be composed of atoms of the same element, such as oxygen molecules that are composed of two oxygen atoms, or of atoms of different elements, such as water molecules composed of two hydrogen atoms and one oxygen atom.

To learn more about molecule
https://brainly.com/question/475709
#SPJ4

MassMass of oxygen used on combustion of 0.554 mol of phosphorus is 957.12 g.

Combustion is the name given to the chemical reaction in which a material combines with oxygen to produce heat. A substance is said to be combustible if it can burn. Another name for it is fuel. Fuel can be either solid, liquid, or gaseous.

Since, 4 moles of phosphorus burns in the presence of 5 moles of oxygen

Therefore, 0.554 moles of phosphorus will burn in presence of 54×0.554=29.91 moles of oxygen.

Molar mass of oxygen is 32 g/mol.

Hence, mass of oxygen used can be calculated by:

Mass of oxygen used under given reaction conditions =32×29.91⇒957.12 g.

To learn more about combustion visit:

brainly.com/question/15117038

#SPZ1

Mass of oxygen used on combustion of 0.554 mol of phosphorus is 957.12 g. Oxygen has an atomic mass of 15.9994. ss.

Combustion is the name given to the chemical reaction in which a material combines with oxygen to produce heat. Another name for it is fuel. Fuel can be either solid, liquid, or gaseous.

4 moles of phosphorus burns in the presence of 5 moles of oxygen 0.554 moles of phosphorus will burn in presence of 54×0.554=29.91 moles of oxygen. Molar mass of oxygen is 32 g/mol. Mass of oxygen used under given reaction conditions 32×29.9 = 957.12 g.

To learn more about chemical visit :-

https://brainly.com/question/13145357

#SPJ1

In addition to respiration, a process known as guttation involves the loss of liquid water from a plant's healthy leaf or stem, mostly through water stomata.

The physiological loss of water . water of water vapor, mostly from the stomata of leaves, but also by evaporation first from surfaces of leaf tissue, flowers, and stems, is known as transpiration.

Additionally, by providing evaporative cooling, vegetation transpiration makes a major contribution to the energy balance of the leaf. Additionally, transpiration speeds up the movement of nutrients and water from roots to the shoots. Transpiration occurs when water vapor leaves a plant through the stomata.

To know more about Transpiration visit:

https://brainly.com/question/13891305

#SPJ1

The ratio of the container with PHe: PAr will be given as= 12.2/1

To know more about pressure here

https://brainly.com/question/22264785

#SPJ4

The ratio of PHe: PAr will be given as= 12.2/1

All pressures present in a reference system are added together to get the total pressure, or ptot. Bernoulli (see Fluid mechanics) defined this pressure as the sum of the static pressure (p), geodetic component (g, z) and dynamic pressure (pdyn), that exist in a fluid along with a stream line in a frictionless flow. The pascal (Pa), often known as kilograms per square meter per second (kg/m1s2), is the SI unit of pressure. Before 1971, pressure in SI was expressed in terms of newtons per square meter. You have static pressure, while a fluid is stationary or when you are moving with it. You would feel an equal amount of air pressure from all the sides.

To know more about pressure here

https://brainly.com/question/12971272

#SPJ4

3.88 grams of sodium azide are required to form 5.00 g of nitrogen gas.

In order to determine how many grams of sodium azide are required to form 5.00 g of nitrogen gas, we can use the balanced equation for the reaction:

2NaN3 (s) → 2Na (s) + 3N2 (g)

We can start by converting the given amount of nitrogen gas to moles:

5.00 g N2 x (1 mol N2 / 28.00 g N2) = 0.1786 mol N2

We know that the reaction produces 3 moles of N2 for every 2 moles of NaN3 that are used, so we can use the following ratio to find the number of moles of NaN3 required:

0.1786 mol N2 / 3 mol N2 = 0.0596 mol NaN3

Finally, we can convert moles of NaN3 back to grams using the molar mass of NaN3:

0.0596 mol NaN3 x (64.99 g NaN3 / 1 mol NaN3) = 3.88 g NaN3

So, 3.88 grams of sodium azide are required to form 5.00 g of nitrogen gas.

Learn more about Balanced Equations here: https://brainly.com/question/12192253

#SPJ4

Answer:

4g of hydrogen

Explanation:

4g of hydrogen (molar mass 2) corresponds to 2 moles of molecules or 4N number of atoms where N is the Avogadro's number (6.023×10

23)

The methods used to monitor a reaction as it occurs in the reaction flask are d) all the above

A polarimeter is an analytical hardware component that measures the polarization of light and is used to analyze the optical activity of chemicals. Optical activity refers to the ability of a material to rotate polarized light and the extent to which such a phenomenon occurs.

A spectrometer is one of the scientific instrument/method used to separate and measure the spectral components of physical phenomena. A spectrometer is a broad term often used to describe an instrument that measures a continuous variable of a phenomenon whose spectral components are mixed in some way.

Learn more about the reaction flask in

https://brainly.com/question/23822902

#SPJ4

4.21 moles of SnO₂ are needed to produce 500.0 grams of Sn for the given reaction.

Tin oxide, is a compound with the formula SnO₂. It is a white or gray powder that is insoluble in water but soluble in strong acids and strong alkalis. Tin oxide is widely used as a pigment in ceramics, glasses, and paints, and in the manufacture of electronic devices such as transistors and solar cells. It is a versatile compound with a wide range of uses and can undergo several important reactions such as: Reduction to tin metal, formation of tin dioxide, formation of tin salts by reaction with acids.

For the given reaction:

SnO₂ + 2H₂ → Sn + 2H₂O

Mole ratio of SnO₂ and Sn is 1:1; this means 1 mole of SnO₂ is required to prepare each mole of Sn.

Now, for the moles of Sn:

n = m/M

Where, n = number of moles

m = mass of Sn (500 g)

M = molar mass of Sn (118.71 g/mol)

n = 500/118.71

n = 4.21 moles

To know more about Tin oxide (SnO₂), visit:

https://brainly.com/question/15384792

#SPJ4

During glycolysis, each G3P produces two ATP, for a total of four ATP per glucose molecule.

The metabolic mechanism that transforms glucose to pyruvate is known as glycolysis. This free energy is utilized to create the high-energy molecules adenosine triphosphate and reduced nicotinamide adenine dinucleotide. Glycolysis is a series of 10 enzyme-catalyzed processes. The initial stage in the breakdown of glucose to extract energy for cellular metabolism is glycolysis. Glycolysis is divided into two phases: energy-requiring and energy-releasing. Glycolysis is the process of breaking down glucose to create energy. It generates two pyruvate molecules, ATP, NADH, and water. The process occurs in a cell's cytoplasm and does not require oxygen. It can be found in aerobic and anaerobic organisms.

Here,

Each G3P produces two ATP during glycolysis, for a total of four ATP per glucose molecule.

To know more about glycolysis,

https://brainly.com/question/14076989

#SPJ4

Answer:ne

Explanation:

KI - Ionic compound,  KCl - Ionic compound,

C₆H₁₂O₆ - Covalent compound, KNO₃ - Ionic compound,

C₆H₄Cl₂ - Covalent compound, C₆H₅COOH - Covalent compound

CH₃COOH - Covalent compound, Parafin wax - Covalent

HCl - Covalent compound

Ionic compounds can be classified as compounds formed between cation ions and an anion. A cation can be described as an electropositive ion and has the tendency to donate valence electrons. Similarly, anions are electronegative ions and have a tendency to accept electrons.

In an ionic compound, an ionic bond contains the complete transfer of electrons, therefore, there exists an electrostatic force of attraction that forms a strong bond.

In a covalent compound, the covalent bond exhibits the mutual sharing of electrons. Shared pairs of electrons are hard to give away as nuclei of two chemical elements together share the electrons and produce a bond stronger.

Learn more about the ionic and covalent compound, here:

brainly.com/question/12144907

#SPJ1

Answer:

joules.

Explanation:

A measure of the total internal heat content.

which could be exothermic or endothermic

As the number of carbon atoms increases the phase changes from gas to liquid,length of chain increases and also the boiling point increases in case of alkanes, alkenes, and alkynes.

An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ1

The boiling point will be lower, because water boils when its vapor pressure is equal to atmospheric pressure.

Atmospheric pressure is described as the force exerted on a surface by the air above it as gravity pulls it to Earth. Atmospheric pressure is commonly measured with a barometer.

If you are at 8 000 m above sea level, the air pressure is lower than one atmosphere and the equilibrium between the water and air pressures will be reached before.

In conclusion, Atmospheric pressure is caused by the weight of the air molecules above.

Learn more about Atmospheric pressure at: https://brainly.com/question/19587559

#SPJ1

The boiling point of water at 8000m above sea level where air pressure is lower would be significantly lower.

The boiling point of water decreases as the air pressure decreases. At an altitude of 8000 meters above sea level, the air pressure is significantly lower than it is at sea level, so the boiling point of water would also be significantly lower.

At sea level, the normal boiling point of water is 100 degrees Celsius (212 degrees Fahrenheit) at a standard atmospheric pressure of 101.3 kPa. As the altitude increases, the atmospheric pressure decreases, so the boiling point of water decreases as well.

Find out more on boiling point of water at https://brainly.com/question/18188829

#SPJ1

Some examples of evidence that support Darwin's theories of evolution and natural selection , such as fossils and similarities between related living organisms.

Darwin employed certain sorts of evidence to support his hypothesis of natural selection, and these types of evidence are still used today. Examples include fossils and similarities between related living animals. Others, like DNA analysis, were unavailable to Darwin's generation but are now employed by scientists to further our understanding of evolution.  evidence supporting evolution: fossil strata, remains of extinct organisms, similarities between current-day organisms, DNA similarities, and embryonic similarity. Artificial selection, or breeding, is a crucial sort of evidence that Darwin looked at and is being looked at and employed today.

Learn more about  Darwin's theories of evolution .

brainly.com/question/25718754

#SPJ4

The number of coffee cups that would be required to fill the enormous coffee cup would be 32 cups.

The world's largest cup of coffee can hold 2010 gallons of coffee as recorded in Las Vegas.

A normal coffee cup will only hold as much as 237 mL of coffee. Recall that:

If 1 gallon = 3.78541 L

  2010 gallons = 2010 x 3.78541

                         = 7608.6741 L

In other words, the coffee cup with the record size will hold a maximum of 7608.6741 L of coffee while a normal coffee cup will only hold 237 mL. The problem now is the number of number coffee cups that will fill the world's record largest coffee.

7608.6741/237 = 32.10

Therefore, the number of normal coffee cups that would be required to fill the enormous coffee cup would be approximately 32 cups.

More on dimensional analysis can be found here: https://brainly.com/question/13078117

#SPJ1

A meterstick is used to measure things in meters and centimeters.

Meterstick is the measurement tool that measures one meter (hundred centimeters) and is used to measure the things in meters and centimeters. Metersticks are often rectangular and tin, and it is made up of wood or metal. Metal ones are often backed with a 'grippy' material such as cork, to improve the friction. Metersticks are usually divided within the lines for each millimeter (1000 per meter) and the numerical markings as per centimeter (100 per meter), with the numbers either in centi- or millimeter. It is a large ruler used for measuring the size or the distance using the metric scale.

To now more about distance here

https://brainly.com/question/15172156

#SPJ4

Simple Lewis dot structures make it easy to see how many valence electrons are present in an atom. Valence electrons are shown as dots surrounding the atom that are organized in pairs in Lewis dot formations.

Electron spin direction is displayed using arrow and line diagrams, along with each orbital. The electron configuration of atoms is shown using arrow and line diagrams or orbital diagrams, which use boxes and arrows to indicate the different orbitals and the pairing arrangement of electrons. This model has the benefit of displaying each orbital as well as the electrons' spin polarity.

Written electron configurations are concise and also depict how the electrons are distributed throughout the sublevels. The number of electrons in a specific sublevel is indicated by superscripts in written electron configuration notation. Written electronic configuration has the advantage of being more compact due to the removal of boxes and arrows. It also displays how electrons are distributed among sublevels.

The arrangement of electrons within an atom's orbitals, shells, and subshells is known as electron configuration.

To know more about electron configuration click here

https://brainly.com/question/29757010

#SPJ4

Answer:

Dot structures make it easy to count electrons and they show the number of electrons in each electron shell.

Arrow and line diagrams show the spin of electrons and show every orbital.

Written configurations require minimal space and show the distribution of electrons between subshells.

Explanation:

correct on edg 2023

Answer:

Whereas ionic bonds join metals to non-metals, metallic bonding joins a bulk of metal atoms.

Explanation:

hope this helps