Good News! Here is a sheet to show you how to perform mole calculations: http://www.sciencewithmrjones.com/downloads/chemistry/moles/how_to_perform_mole_calculations.pdf
The reaction for luminol is basically luminol and hydrogen peroxide. In the instructions for the preparation of the chemicals, I found that the hydrogen peroxide is 44 times more concentrated than the luminol. The fact that there are two reactants, should make you wonder if the reaction is second order overall. However, in class, we presented data that showed that the natural log of the amount of light change over time was a straight line with a negative slope. This would tend to make you think that the reaction is first order, given the information here, you can confidently say that this reaction is:
A. zeroth order
B. first order
C. pseudo first order
D. second order
E. third order
Answer:
pseudo first order
Explanation:
We know that for a first order reaction, the plot of the natural log of the amount of reactant against time is a straight line with a negative slope. In this case the amount of substance is monitored using the amount of light change. Hence, the plot of the natural log of the amount of light change against time was a straight line with a negative slope.
The statement above characterizes a first order reaction. However, we must remember that the reaction is bimolecular; it involves luminol and hydrogen peroxide. The hydrogen peroxide is 44 times more concentrated than the luminol making the reaction a pseudo first order reaction.
A Pseudo first-order reaction can be defined as a second-order or bimolecular reaction that is made to behave like a first-order reaction(Byjus).
Is nitric acid a strong or weak acid. Explain your answer.
Answer:
There are only a few (7) strong acids, so many people choose to memorize them. All the other acids are weak. The strong acids are hydrochloric acid, nitric acid, sulfuric acid, hydrobromic acid, hydroiodic acid, perchloric acid, and chloric acid.Explanation:
그것은 당신의 교육에 도움이 되기를 바랍니다
if an atom has 22 protons 28 neutrons 20 electrons what would its atomic number be
Answer:
22
Explanation:
The atomic number indicates the amount of protons, so it would be 22
Which of the following can be calculated from the mass of the reactants used in a chemical reaction? (Select all that apply)
Theoretical yield of products
Amount of limiting reactant used in a reaction
Actual yield of products
Amount of excess reactant from a reaction
Answer:
Can you explain it more please
Explanation:
What are the three types of plate boundaries? What is the direction of movement at each boundary?
There are three kinds of plate tectonic boundaries: divergent, convergent, and transform plate boundaries.
This image shows the three main types of plate boundaries: divergent, convergent, and transform.
This image shows the three main types of plate boundaries: divergent, convergent, and transform. Image courtesy of the U.S. Geological Survey. Download image (jpg, 76 KB).
The Earth’s lithosphere, which includes the crust and upper mantle, is made up of a series of pieces, or tectonic plates, that move slowly over time.
A divergent boundary occurs when two tectonic plates move away from each other. Along these boundaries, earthquakes are common and magma (molten rock) rises from the Earth’s mantle to the surface, solidifying to create new oceanic crust. The Mid-Atlantic Ridge and Pacific Ring of Fire are two examples of divergent plate boundaries.
When two plates come together, it is known as a convergent boundary. The impact of the colliding plates can cause the edges of one or both plates to buckle up into a mountain ranges or one of the plates may bend down into a deep seafloor trench. A chain of volcanoes often forms parallel to convergent plate boundaries and powerful earthquakes are common along these boundaries.
At convergent plate boundaries, oceanic crust is often forced down into the mantle where it begins to melt. Magma rises into and through the other plate, solidifying into granite, the rock that makes up the continents. Thus, at convergent boundaries, continental crust is created and oceanic crust is destroyed.
Two plates sliding past each other forms a transform plate boundary. One of the most famous transform plate boundaries occurs at the San Andreas fault zone, which extends underwater. Natural or human-made structures that cross a transform boundary are offset—split into pieces and carried in opposite directions. Rocks that line the boundary are pulverized as the plates grind along, creating a linear fault valley or undersea canyon. Earthquakes are common along these faults. In contrast to convergent and divergent boundaries, crust is cracked and broken at transform margins, but is not created or destroyed.
5 pos. 1. An excess of sodium sulfate was added to a 500. mL sample of polluted water. The
mass of lead (II) sulfate that precipitatcd was 308.88 mg. Determine the mass of lead that was in
the polluted water.
Na2SO4(aq) + Pb2+ (aq) → 2Na(aq) + PbSO4(s)
Answer:
[tex]m_{Pb^{2+}}=0.211gPb^{2+}[/tex]
Explanation:
Hello!
In this case, according to the stoichiometry of the reaction, it is possible to evidence the 1:1 mole ratio between lead (II) ions and lead (II) sulfate precipitate; that is why we can compute the mass of lead (II) in the polluted water as shown below:
[tex]m_{Pb^{2+}}=308.88mgPbSO4*\frac{1gPbSO4}{1000mgPbSO4} *\frac{207.2gPb^{2+}}{303.26gPbSO4} \\\\m_{Pb^{2+}}=0.211gPb^{2+}[/tex]
Best regards!
Diffusion of Sucrose in Gelatin. A layer of gelatin in water 5 mm thick and con-taining 5.1 wt % gelatin at 293 K separates two solutions of sucrose. The concentra-tion of sucrose in the solution at one surface of the gelatin is constant at 2.0 g sucrose/100 mL solution, and 0.2 g/100 mL at the other surface. Calculate the flux of sucrose in kg sucrose/s
Answer:
the flux of sucrose is 9.072 × 10⁻⁷ kg sucrose / m² sec
Explanation:
Given the data in the question;
water-gelatin solution separating two different concentration solutions of sucrose; 5.1 wt % gelatin at 293 K; at this conditions diffusivity of sucrose in water gelatin solution is;
[tex]D_{AB}[/tex] = 0.252 × 10⁻⁹ m²/sec.
we know that; 1 L = 0.001 m³, 1mL = 0.001 L
[tex]C_{A1}[/tex] = 2.0 g sucrose/100 mL = 2.0 × 10⁻³ kg sucrose / 100 × 10 ⁻³ L
[tex]C_{A1}[/tex] = 2.0kg sucrose / 100 L
[tex]C_{A1}[/tex] = 2.0 kg sucrose / 100 × 10⁻³ m³
[tex]C_{A1}[/tex] = 20 kg sucrose / m³
[tex]C_{A2}[/tex] = 0.2 g sucrose/100 mL = 0.2 × 10⁻³ kg sucrose / 100 × 10⁻³ × 10⁻³ L
[tex]C_{A2}[/tex] = 2 kg sucrose / m³
Thickness ß = 5 mm = 5 × 10⁻³ m
Now, flux of sucrose in kg sucrose / m³sec will be;
using the formula, [tex]N_{A}[/tex] = [tex]D_{AB}[/tex] /ß ( [tex]C_{A1}[/tex] - [tex]C_{A2}[/tex] )
we substitute
[tex]N_{A}[/tex] = (0.252 × 10⁻⁹ m²/sec / 5 × 10⁻³ m) ( 20 kg sucrose / m³ - 2 kg sucrose / m³ )
[tex]N_{A}[/tex] = (0.252 × 10⁻⁶ / 5) × 18 kg sucrose / m² sec
[tex]N_{A}[/tex] = 4.536 × 10⁻⁶ / 5 kg sucrose / m² sec
[tex]N_{A}[/tex] = 9.072 × 10⁻⁷ kg sucrose / m² sec
Therefore, the flux of sucrose is 9.072 × 10⁻⁷ kg sucrose / m² sec
what causes the different crusts to rise and lower?
Answer:
tectonic plates
Explanation:
where do coal,oil and natural gas came from?
Answer:
I hope it will help you
plz mark me as brainliest
plz thank my answer
QUESTION 7 Can you use alligation for any type of liquid?
Answer:
Yes you can use alligation for a type of liquid. Explanation: Alligation is an old and practical method of solving arithmetic problems related to mixtures of ingredients.
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Thus, we can use allegation for any type of liquid.
What is matter?
Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. Allegation is a form of liquid that we may utilize. Allegation is a time-tested and useful strategy for tackling mathematical issues involving combinations of elements.
Thus, we can use allegation for any type of liquid.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ2
How to make 0.01 Molar solution in 30 ml of water
Answer:
You see the concentration decreased ten fold, from 1 M to 0.1 M.
You can simply increase the volume by ten times.
For example
If you have 250 mL of 1 molar HCl, you can add distilled water upto 2500 mL. Now the concentration is 0.1 molar.
If you want to use the serial dilution method, you can use the C1V1=C2V2 equation.
C1 = starting concentration.
C2 = final concentration.
V is for volume.
So let's say you have 500 mL of 1 M HCl and you only want 50 mL of 0.1 M HCl.
1 M x V1 = 0.1 M x 50 mL
V1 = 5 mL
So you take 5 mL of the original (stock) solution and dilute it up to 50 mL. Then you have 50 mL of 0.1 M HCl.
Explanation:
How many molecules are there in 10.5 grams of iron (111) sulfate trihydrate? With work shown
Give the coefficient of y in the following expression. 2xz² - 7xy + 4.
Answer:
the coefficient of y is -7
Which is correct order of the weather observed with each cloud type from 1 to 4?
A. Rain, thunderstorm, snow, fair
B. Light rain, fair, thunderstorm, fair
C. Light rain, thunderstorm, fair, fair
D. Hail, lightning, thunderstorm, fair
Answer:i thinks its A
Explanation:but who knows
how much energy must be released by 50.0 g of steam to decrease its temperature from 125.0 degrees Celsius to 100.0 degrees Celsius ?
Answer:
5250 Joules
Explanation:
Mass = 50g
Initial Temperature = 125.0 degrees Celsius
Final Temperature = 100 degrees Celsius
Temperature change = Final - Initial = 100 - 125 = -25
Heat = ?
These quantities are related by the equation;
H = mCΔT
where c = specific hear capacity = 4.2 J/g°C
H = 50 * 4.2 * (-25)
H = -5250 J (The negative sign is because heat is being released)
A food company produces raspberry coulis as a topping for its best-selling line, double strength chocolate mousse pie. Fresh raspberries comprising 5% seeds, 20% pulp solids, and 75% water are homogenised and placed in a stainless steel vat. Sugar is added to give a raspberry:sugar mass ratio of 3.5:1. The mixture is blended, strained to remove the seeds, then heated to reduce the water content to 35%. Half a tonne of coulis is produced every day.
Required:
a. What mass of raspberries is required per week?
b. How much sugar is required per week?
c. What is the sugar content of the coulis?
Answer:
5357.1429kg per week
2142.8571 kg per week
Explanation:
Given that :
Fresh Raspberries :
5% = seeds
20% = pulp solids
75% = water
Raspberry : Sugar = 3.5 : 1
Water content = 35%
Coulis produced per day = 0.5 tonnes
Mass of Raspberry produced per week :
Mass is measured in kg;
1 tonne = 1000kg
0.5 tonne = (1000/2) kg = 500kg
Mass of Coulis produced per week = 500kg * 7 = 3500kg
Coulis contains 35% water, Raspberry required 75% water :
(3500 / 35) * 75 = 7500kg
Raspberry : Sugar ratio = 3.5 : 1
Mass of Raspberry :
[7500 - (1 /3.5) * 7500]
7500 - 2142.8571
= 5357.1429kg per week
B.
Sugar required per week:
(1/3.5) * 7500kg
= 2142.8571 kg per week
C.)
Sugar content in coulis :
Convert Fahrenheit temperature
to Kelvin scales
Answer:
K = (F – 32)5/9 + 273.15
Explanation:
You basically convert Fahrenheit to Celcius and then to Kelvin
Here's the entire formula:
K = (x °F – 32)5/9 + 273.15
SUMMARY: Write a 3-4 sentence summary about the Periodic Table.
Answer:
The periodic table, also known as the periodic table of elements, is a tabular display of the chemical elements, which are arranged by atomic number, electron setup, and repeating chemical properties. The structure of the table shows occasional (popular things/general ways things are going). The seven rows of the table, called periods, generally have metals on the left and nonmetals on the right. The columns, called groups, contain elements with almost the same chemical behaviours. Six groups have accepted names as well as assigned numbers: for example, group 17 elements are the halogens; and group 18 are the noble gases. Also displayed are four simple rectangular areas or blocks connected with the filling of different atomic orbitals.
Explanation:
i think that's what you're looking for...
an alloy is a metal that has?
An alloy always has two or more elements/metals in it. An alloy always has at least metal in it.
Steels have iron and carbon in it. Bronze is copper and tin, or aluminum, or manganese, or zinc. German silver isn't silver at all and contains copper, zinc, and nickel.
Hope this helps!
If each water molecule contains 2 hydrogen atoms, how many total oxygen atoms in 20 water molecules?
10
20
40
60
Which two statements about composite materials is true?
A. They're made up of more than one substance
B. They have the same or similar properties as the materials used to make them
C. They're always made of metal
D. They're readily available in nature
help as fast as u can please
6. Elements in column (group) 18 (8A) are called the________ and the outermost electrons are found in
the p sublevel. Color these elements a different color and reference this group on the legend.
Answer:
Noble gases
Explanation:
Noble gases have filled electron shells (group 18=8 electrons) and are all odorless, colorless, monatomic gases with very low chemical reactivity.
_______________ is the interaction between organisms in an ecosystem.
How many atoms are in 12 moles of sodium?
Answer: There are 1.20 x 1024 atoms of sodium in 2 moles
Explanation:
What element does Ca-37 turn into when it gives off radiation?
K-37
K-39
Sc-37
Sc-45
A flask at room temperature contains exactly equal amounts (in moles) of nitrogen and xenon.
a. Which of the two gases exerts the greater partial pressure?
b. The molecules or atoms of which gas have the greater average velocity?
c. The molecules of which gas have the greater average kinetic energy?
d . If a small hole were opened in the flask, which gas effuses more quickly?
Answer:
a) Same
b) Nitrogen
c) Same
d) Nitrogen
Explanation:
a)
The formula for partial pressure of a gas is equal to
[tex]p_B = n_B \frac{RT}{V}[/tex]
Here nB is the number of moles .
The number of moles for both the gases are same and hence the partial pressure for the two gases will also be same.
b) The greater average velocity is calculated by using following formula
[tex]v_{RMS} = \sqrt{3RTM}[/tex]
Here M is the molar mass.
Molar mass of nitrogen is greater than the molar mass of xenon and hence nitrogen will have higher greater average velocity
c) As we know, the average kinetic energy of gas particles is dependent on the absolute temperature of gas and if all the gases are at same temperature, their kinetic energy will also be same. Since nitrogen and xenon are at same temperature, their kinetic energy will be same
d) Effusivity is depended directly on the thermal conductivity, density and and the specific heat capacity.
All these three parameters are higher in case of nitrogen. Thus, it will effuse first
What is an extinct species? *
(10 Points)
O A. a species that blends in easily with its environment
O B. a species that resembles another species
O C. a species that was unable to adapt and died out
O D. a species that is bred for specific characteristics
Answer: C
Explanation: I got it right.
PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE HELP
DUE IN 5 MINUTES CHEMISTRY DIMENSIONAL ANALYSIS
In 2009, Usain Bolt ran 100 meters in 9.58 seconds. What is this speed in km/hr? (!! DIMENSIONAL ANALYSIS!! NOT A REGULAR PROBLEM)
On another planet, the isotopes of titanium have the given natural abundances.
Isotope Abundance
Mass (u)
46Ti
70.600%
45.95263
48Ti
12.900%
47.94795
50Ti
16.500%
49.94479
What is the average atomic mass of titanium on that planet?
a molecure that contains 3 iddentical polar bonds to the central atom will be
ANSWER:
Nonpolar
sorry if I'm wrong