I rode my bicycle to grandmother's house at 6 km/h in a flat road for 5 min before reach a hill. I went at 2 km/h up the hill for 3minutes. I met a friend and stopped to talk for 5 minutes. I went on at 2 km/h to my grandmother's house. Draw (plot) the v against t graph for this motion.
Answers
The graph can be plotted based on the given information which are given
in pairs (velocity and time), and which the coordinate pairs are formed.
Please find attached the required v against t graph created with MS ExcelReasons:
The given data are presented in a tabular form as follows;
[tex]\begin{tabular}{|c|c|c}\underline{Duration (Minutes)} & \underline{Speed (km/h)}\\0 - 5 &6 \\5 - 8&2\\8 -13&0&\\13- &2&\end{array}[/tex]
The velocity time graph can be plotted using the above table values on
MS Excel using the above table elaborated as follows;
[tex]\begin{tabular}{|c|c|c}\underline{Duration (Minutes)} & \underline{Speed (km/h)}\\0 &6 \\5&6\\5 &2\\8&2\\8&0\\13&0&\\13 &2&\end{array}[/tex]
The attached graph can then be created using the Insert → Chart menu
after selecting the data above inputted in the spreadsheet button on MS
Excel.
Learn more about velocity time graph here:
https://brainly.com/question/24874645
https://brainly.com/question/13522898
Related Questions
What is the frequency of light having a wavelength of 4. 50 x 10-6 cm.
Answers
The frequency of a photon of red light with wavelength 4.50 x 10−7m is 6.67 x 1014Hz.
Suppose you were able to take measurements of current through the
resistor and voltage across the resistor. Your record of numerical values is written in a
tabular data below
Answers
Answer:
see attached
Explanation:
It will be easier to plot the data if you have grid lines to work with.
In the attached, we had to reverse the order of entries in the table, because the graphing program likes the independent variable listed first.
What is the mass, in kilograms, of a large dog that weighs 441 newtons?
Answers
Answer:
441 Newtons equals 44.97 kilograms.
the definition of convetion
Answers
write two example in which chemical energy is converted into heat energy
Answers
Answer:
batteries in an electric heater, a nuclear power plant
Explanation:
sorry if it wrong g
In a hydraulic press a force of 200N is applied to a master piston of area 25Cm2.if the press produces 500N determine the area of the piston.
Answers
Answer:
625 GIVE ME BRAINLIEST ANSWER PLEASE
Explanation:
This question is based on pascal's Law.
So By Pascal's Law
=
therefore =force on input piston =200N
= Force on output piston = 5000N
therefore after putting the values we get,
a) = (25x 5000)/200
= 625
b) area of the salve piston = = 625
so = 625/3.14 = 199
so r = = 14.10 cm
whats 1+0 n3rje'hefruhhhhhhhhhhhhhhhhhhhhhhhhtrrrrrrrrrrrrr
Answers
Answer:
1
Explanation:
cause 1+0=1
Hello everyone, I just want to know the formula to solve this problem:
What is the speed of sound at 62°C?
and how to solve this kind of problem? My brain isn't working.. :)
Answers
Answer:
367 m/sExplanation:
Use simplified formula:
[tex]v=331.3\sqrt{1+T/273.15}[/tex] , where T- temperature in Celsius1. A 3.5 kg object experiences an acceleration of 0.5 m/s2. What net force does the object experience
Answers
Answer:
1.75 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 3.5 × 0.5 = 1.75
We have the final answer as
1.75 NHope this helps you
An "energy bar" contains 26 ggof carbohydrates.How much energy is this in joules?
Answers
Find the displacement in the time interval 3 seconds to 4 seconds
A. 1m
B.3m
C.7m
D.9m
Answers
Answer:
B. 3m
Explanation:
Took the quiz.
Hope this helps!!
Complete the following sentence. Pressure in a liquid depends on the __________ of the liquid.
Answers
Answer:
density
Explanation:
because it is directly proportional
Pressure in a liquid depends on the density of the liquid.
What is density?Density is defined as the mass per unit volume. It is an important parameter to understand the fluid and its properties. Its unit is kg/m³.
The pressure in the liquid is;
P = ρgh
Where,
h is the height
ρ is the density
g is the acceleration due to gravity
The density of a liquid determines its pressure.
Hence, density is the correct answer.
To learn more about the density refer to the link;
https://brainly.com/question/952755
#SPJ2
when you hold a spherical concave mirror with a 48.2-cm radius of curvature in front of your face, you see an image of your face that is 61.8 cm in front of the mirror. what is the distance between the mirror and your face?
Answers
The distance between the mirror and your face is 39.5 cm
Using the mirror formula 2/r = 1/u + 1/v where r = radius of curvature = - 48.2 cm, u = distance between mirror and your face = object distance and v = distance between image and your face = - 61.8 cm. The distances are negative since the image is in front of the mirror and distances to the left of the mirror are negative.
So, making u subject of the formula, we have
2/r = 1/u + 1/v
1/u = 2/r - 1/v
1/u = (2v - r)/rv
u = rv/(2v - r)
Substituting the values of the variables into the equation, wse have
u = -48.2 cm × -61.8 cm/(2 × -61.8 cm - (-48.2 cm))
u = 2978.76 cm²/(-123.6 cm + 48.2 cm)
u = 2978.76 cm²/-75.4 cm
u = -39.51 cm
u ≅ -39.5 cm (The distance is negative since it is in front of the mirror)
So, the distance between the mirror and your face is 39.5 cm
Learn more about spherical concave mirror here:
https://brainly.com/question/12904931
Surface ocean currents are generated MOSTLY by A) wind. B) tides. C) water density. D) the Coriolis effect.
Answers
Answer:
I think it's D) the Coriolis Effect
Explanation:
Answer: THE ANSWER IS D) the Coriolis effect.
Explanation: I GOT A 100 ON THE TEST
Can anyone help me with this question? I’ll give BRAINLIEST to whoever answers first
Answers
Answer:
a) F = 84.64N
b) The force has to increase.
Explanation:
First of all, let's convert everything to the same unit system:
Vo = 0 m/s Vf = 98 mi/h * 1609.34 m / 1mi * 1h / 3600s = 43.8m/s
d = 1.7m m = 0.15kg
We can calculate force as:
F = m*a where a is the acceleration experiencd by the ball and m is its mass.
In order to calculate acceleration, we can use this formula:
Solving for a:
Now, the force will be:
F = m * a = 84.6N
As we can see in that previous equation, the force is directly proportional to the mass of the ball, so, assuming the final speed of the ball is the same as before (that is, the acceleration is the same), the force will increase in the same proportion as the mass does.
What kind of cord is this no links please
Answers
Answer:
if i'm not mistaken that's either a plug in cord for a certain device, or what i am assuming to be a usb software cord.
Explanation:
4. Analyze: Drag this tile to the green strip. Turn on Show results.
A. What units are given to the right of the equals sign? _ 11,000
B. Why didn't the units cancel in this case? The tile is not fupped
C. What do you think you could do to make them cancel?
Answers
what is the meaning of physics
Answers
Answer:
the branch of science concerned with the nature and properties of matter and energy. The subject matter of physics, distinguished from that of chemistry and biology, includes mechanics, heat, light and other radiation, sound, electricity, magnetism, and the structure of atoms.
Explanation:
A marble is launched at by dropping it through a marble launcher. The marble took 0.22s to land 0.31m from
where it was launched. Find the horizontal velocity of the marble as it rolls off the table.
A. 1.4m/s
B. 0.53m/s
C. 0.71 m/s
D. 0.07m/s
Answers
Hi there!
For projectile motion, the horizontal and vertical components are SEPARATE.
We can use the kinematic equation to solve:
dₓ = vₓt
We can rearrange to solve for vₓ:
dₓ/t = vₓ
0.31/0.22 = vₓ
vₓ = 1.4 m/s ⇒ A
A boy on a bicycle drags a wagon full of newspapers at 0.80 m/s for 30 min (1800 s) using a force of 40 N. How much work has the boy done
Answers
Answer:
N133A
Explanation:black
How to find frequency.
Answers
Answer:
Divide the number of times an event occurs by the duration of time to calculate frequency. For instance, Anna divides the number of webpage clicks (236) by the time spent on the site (one hour, or 60 minutes). She discovers that she gets 3.9 clicks every minute.
Explanation:
does this help?
If you pass an electric current through an iron nail, you will create an electromagnet. This magnet will pick up small objects, thus demonstrating that electrical energy can be converted into mechanical energy. Is there a way to use this principle to create a motor?
Answers
An iron nail, when it loses its magnetism, often iron behaves as a magnet when electric current flows only through the coil of insulated wire wrapped around it. There is therefore, a way to use this principle to create a motor.
An electromagnet is said to be created if a known current is passed through a coil of wire gathered around an iron nail.The principle is often used to make an electric motor by creating a current that is moving coil into a movable core that is attached to a spring.
If a current flows through a wire, electrical energy is said to be converted into different kinds of energy such as heat in a heating element, etc. The electric current could also be transformed or made to create a mechanical energy, which is what happens in an electric motor.
A motor is simply known as a generator working in reverse. This can be liken to a motor when a wire is put in between the two paper clips that are connected to the battery.
Learn more from
https://brainly.com/question/25565653
Two electrons are separated by one cm. What is the ratio of the electric force to the gravitational force between them? (me = 9. 11 ´ 10-31 kg, ke = 8. 99 ´ 109 N×m2 /C2 , G = 6. 67 ´ 10-11 N×m2 /kg2 , and e = 1. 6 ´ 10-19 C) a. 2. 3 ´ 102 b. 1. 3 ´ 1020 c. 3. 1 ´ 1022 d. 4. 2 ´ 1042.
Answers
The ratio of the electric force to the gravitational force between the two electrons is [tex]4.2 \times 10^{42}[/tex].
The given parameters;
Mass of the electron, [tex]m_e[/tex]= 9.11 x 10⁻¹¹ kgCoulomb's constant, k = 8.99 x 10⁹ Nm²/C²Gravitational constant, G = 6.67 x 10⁻¹¹ Nm²/kg²Charge of electron, q = 1.6 x 10⁻¹⁹ CDistance between the two electrons, r = 1 cmThe electrostatic force between the two electrons is calculated as follows;
[tex]F_c = \frac{kq^2}{r^2} \\\\[/tex]
The gravitational force between the two electrons is calculated as follows;
[tex]F_g = \frac{Gm_e^2}{r^2}[/tex]
The ratio of the electric force to the gravitational force between the two electrons is calculated as follows;
[tex]\frac{F_c}{F_g} = \frac{kq^2}{r^2} \times \frac{1}{\frac{Gm^2}{r^2} } \\\\\frac{F_c}{F_g} = \frac{kq^2}{r^2} \times \frac{r^2}{Gm^2} \\\\\frac{F_c}{F_g} = \frac{kq^2}{Gm^2}\\\\[/tex]
[tex]\frac{F_c}{F_g} = \frac{(8.99 \times 10^9) \times (1.6 \times 10^{-19}))^2}{(6.67 \times 10^{-11} ) \times (9.11 \times 10^{-31})^2} \\\\\frac{F_c}{F_g} = 4.2 \times 10^{42}[/tex]
Thus, the ratio of the electric force to the gravitational force between the two electrons is [tex]4.2 \times 10^{42}[/tex].
Learn more about electrostatic force here: https://brainly.com/question/16796365
Compare the amplitude of these waves.
help?
Answers
Answer:
The greater the amplitude of a wave then the more energy it is carrying.
Explanation:
E is carrying the most energy which means that it has the highest amplitude
A has the least energy because it has the lowest amplitude
How far can a mother push a 20.0 kg baby carriage, using a force of 62 N, if she can only do 2920 J of work?
Answers
Please find attached photograph for your answer.
Hope it helps.
One thing I have to mention is that here we do not need to calculate the mass because the amount of force is already given.
Please do comment if you have any query.
The difference in particle size of the soil constituents determine its texture.
Answers
Answer:Soil texture depends on the size of individual soil particles and is determined by the relative proportions of particle sizes that make up the soil. The texture affects the amount of water that can be absorbed for use by plants and animals.
Explanation:
State one advantage and disadvantage of friction
Answers
Answer:
Advantage: Helps us to walk without slipping.Helps machines workDisadvantage:
We slip on a wet floor.Causes the smoothness of tires and smoothness of shoes soul.Saturn’s moon titan has a mass of 1.35 × 10^23 kg. if titan is 1.19 × 10^6 km from saturn, and saturn’s mass is 5.86 × 1026 kg, what is the gravitational force between saturn and its moon?
Answers
Answer:The gravitational force equation is Fg=(G*M*m)/r² where, G is the gravitational constant, G=6.67*10^-11 m³/kg*s², M is the mass of Saturn, M=5.86*10^26, m is the mass of Titan, m=1.35*10^23 and r is the distance, r=1.19*10^6 km=1.19*10^9 m. Now we simply input the numbers into the equation:
Fg=(6.67*10^-11)*(5.86*10^26)*(1.35*10^23)/(1.19*10^6)²
Fg=(5.277*10^39)/(1.41*10^18)=3.743*10^21 N
The correct answer is the third one.
Explanation:
how do humans affect the lithosphere
Answers
A block of weight W is pulled a distance L along a horizontal table. The work done by the weight is ?
Answers
Distance = L
Force = mass x acceleration
Work done = FL
Work done = maL