The current density in a cylindrical wire can be calculated using the formula J = I/A, where I is the current and A is the cross-sectional area of the wire. Given a current of 2.4 A and a wire diameter of 2.0 mm, the average current density in the wire is approximately 3.05 x 10⁶ A/m².
We can use the formula for current density, which is given by J = I/A, where J is the current density, I is the current, and A is the cross-sectional area of the wire. The cross-sectional area of a cylindrical wire is given by A = πr², where r is the radius of the wire.
Given that the current I is 2.4 A and the diameter of the wire is 2.0 mm, we can find the radius as r = d/2 = 1.0 mm = 0.001 m.
Using the formula for the area of a circle, A = πr², we get A = π(0.001 m)² = 7.854 x 10⁻⁷ m².
Substituting the values into the formula for current density, we get:
J = I/A = 2.4 A / 7.854 x 10⁻⁷ m² = 3.05 x 10⁶ A/m²
Therefore, the average current density in the wire is 3.05 x 10⁶ A/m², which is closest to option (a) 3.6.
To know more about the current density refer here :
https://brainly.com/question/31785329#
#SPJ11
A beam of light has a wavelength of 5.06*10^ ^ 7m What is the frequency of the light?
Answer:
59.23499537
Explanation:
Can someone help me?in the phy
Answer:
so your answer is gonna be the first one which is A
How are humidity and precipitation related?
A. When humidity is low, the chance of precipitation is high.
b.When humidity is high, the chance of precipitation is high.
c.When humidity is high, the chance of precipitation is low.
d.Changes in humidity do not cause precipitation.
Answer:
Relative humidity depends on the amount moisture actually in the air at some temperature to the amount of moisture that the air can hold.
For instance, at 25 deg C the air has a saturation pressure of 23.76 mm of Hg.
That means that if at that temperature the pressure of the water vapor in the air reaches 23.76 mm Hg then the air is 100% saturated.
I believe the standard air pressure at 25 deg C is 760 mm Hg.
Now if the pressure of the water vapor in the air is 1/2 * 23.76 = 11.88 mm then the air is 50% saturated and the relative hunidity is 50 %.
At 100% relative humidity rain occurs (the air can't hold any more water).
When humidity is high, the chance of precipitation is high. The correct answer is b. When humidity is high, the chance of precipitation is high.
The amount of moisture or water vapor in the air is referred to as humidity. Relative humidity is a common way to measure it since it shows how much moisture the air is holding relative to how much it could contain at a particular temperature.
Any type of water that falls from the atmosphere and makes it to the surface of the Earth is referred to as precipitation. Examples include rain, snow, sleet, and hail.
When humidity levels are high, there is a lot of moisture in the air, which increases the possibility that saturation will occur. Excess water vapor condenses into visible water droplets or ice crystals as the air gets saturated, creating clouds. Condensed moisture in the clouds eventually gains enough weight to return to Earth as precipitation.
Therefore, when humidity is high, the chance of precipitation is high. The correct answer is:
b. When humidity is high, the chance of precipitation is high.
To know more about humidity, click here:
https://brainly.com/question/28528740
#SPJ6
Explain why the radiative zone of the sun is hotter than the corona of the sun
Answer: Because The spectra provided evidence to explain why the sun's atmosphere is so much hotter than its surface. ... Clear evidence now suggests that the heating mechanism depends on regular, but intermittent explosive bursts of heat, rather than on continuous gradual heating.
Explanation:
The Purpose Of Stretching Is :
A. To increase your flexibility
B.To increase your range of motion during workout
C.To increase blood flow to the muscles
D. All of the above
Answer:
all of the above are correct
Explanation:
hope it helps you
please mark me as brainlist
Discuss how the motion of the stunt cyclist relates to the forces acting on the stunt cyclist during the collision
Answer:
hello your question is incomplete hence I will give you a general answer on how a stunt cyclist performs his stunts successfully
answer ;
The stunt cyclist trying to perform some sort of stunt with the bicycle will be faced with some forces like the static fiction between the tires of the bicycle and wall and also a centripetal force.
In order to overcome the centripetal force the minimal grip of the bicycle must be equal to the weight and the speed at which the cyclist must go can be represented as :
[tex]V_{min} = \sqrt{\frac{r.g}{u} }[/tex]
Explanation:
The stunt cyclist trying to perform some sort of stunt with the bicycle will be faced with some forces like the static fiction between the tires of the bicycle and wall and also a centripetal force.
In order to overcome the centripetal force the minimal grip of the bicycle must be equal to the weight and the speed at which the cyclist must go can be represented as :
[tex]V_{min} = \sqrt{\frac{r.g}{u} }[/tex]
where ; r = radius of the tunnel where the stunt is to be performed
g = gravitational speed
u = coefficient of static friction
Unlike Electromagnetic waves, Mechanical waves need a to
transfer energy
You have a working electrical parallel circuit with three light bulbs, then 1 bulb burns
out.
Describe how electric current flows through the parallel circuit after 1 of the 3 bulbs
burns out?
Answer:
but the answer should be no as if 3 bulbs are connected together if one burns out the whole circuit will stop .hope you understood
please mark me as brainlist
The unit of power of a lens is.
(a) Metre
(b) Dyne
(c) Dioptre
Answer:
c. dioptre that's the answer.
A 2 kg ball is thrown down with 50J of energy from a height of 10m, what is its velocity before it strikes the ground (neglect air resistance)
Answer:
Explanation:
Given the following data;
Mass = 2kg
Energy = 50J
Height = 10m
To find the speed
Kinetic energy can be defined as the energy possessed by a body due to its motion.
K.E = ½mv²
Substituting into the equation, we have;
50 = ½*2*v²
V² = 50
Taking the square root of both sides, we have;
V = 7.07m/s
Are moons 1-4 waxing are waning ?
Answer:
I want to help you but i cant.
Explanation:
please provide a screenshot or photos of moons 1-4
The dog has ran 100 meters in 20 seconds and then 300 meters in 25 seconds what was the average speed of the dog over the entire time it was running
Explanation:
the speed of the dog was 400
One can expect good quality produce if proper attention is given to the proper
selection of planting materials. TRUE or FALSE ?
Answer:
True.
Explanation:
One can expect good quality produce if proper attention is given to the proper selection of planting materials.
what is the resistance of an object that produces a current of a 6 A and has a voltage of 30
Answer:
this is the answer the required questions
hope you like this
What is the net force in this image?
a
8000 N right
b
5000 N right
c
4000 N right
d
4000 N left
e
5000 N left
f
8000 N left
Answer:
4000N left
Explanation:
6000N-1000N-1000N
6000N-2000N
8000N
3. The only way to protect against the damage from a collision is to reduce the
by wearing what protective football gear?
some knee pads for soccer
The effect of collision during a soccer game can be minimized by wearing a shin protection gear called the shin guard.
The protection gear is usually worn in other to palliate the effect of collison during sporting activities.
As for football, the most vulnerable part of the body which is usually prone to damage during collision is the shin or knee.
Therefore, players often wear shin protection gear in other to minimize the risk of damage during collision.
Learn more :https://brainly.com/question/18519965
Explain how is the voltage across a resistor measured?
Answer:
You take the basic formula of E = I x R, solve for R -> R = E / I. In other words, take the required voltage drop (in volts) and divide by the current (in amps) in the resistor and determine the resistance (R) in ohms.
Explanation: hope this helps
manganese dioxide is used in the dry cell as
Answer:
Electrolytic manganese dioxide (EMD) is used in zinc-carbon batteries together with zinc chloride and ammonium chloride. EMD is commonly used in zinc manganese dioxide rechargeable alkaline (Zn RAM) cells also. For these applications, purity is extremely important.
Explanation:
hope this helps...
Use the image to answer the question. Which process enables the boy to see
over the wall?
A.diffraction
B.interference
C.reflection
D.refraction
HELLO
İ THİNK D
WHY D?
BCUESE SEN COK MALSİN ZAAA DAHA TÜRCE BİLMİYON MK
what makes magnets work
PLS ANSWER FAST TIMED TEST WILL GIVE BRAINLY!!!!!!!!!
True or False?
It is easier to carry an empty backpack than a backpack full of books. This is an example of Newton’s 2nd law.
Answer:
The answer iis true
Explanation:
It is much easier to carry your backpack when it is empty rather than when it's full of textbooks (or soaked from the rain).
True or false: Energy is everything and the whole universe is governed by energy
Answer:
True
Explanation:
I took the test
A cyclist accelerates from 0 m/s to 8 m/s in 3 seconds. What is her acceleration? Is the acceleration higher of another cyclist who accelerates from 0 to 30 m/s in 8 seconds? How do you know?
Answer:
Acceleration of one cyclist=[tex]2.67m/s^2[/tex]
Yes, the acceleration is higher of another cyclist who accelerates from 0 to 30 m/s in 8 seconds.
Explanation:
We are given that
Initial velocity of one cyclist, u=0 m/s
Final velocity of one cyclist, v=8m/s
Time, t=3 s
Initial velocity of another cyclist, u'=0
Final velocity of another cyclist, v'=30m/s
Time, t'=8 s
We know that
Acceleration, [tex]a=\frac{v-u}{t}[/tex]
Using the formula
[tex]a=\frac{8-0}{3}=\frac{8}{3}=2.67m/s^2[/tex]
Acceleration of one cyclist=[tex]2.67m/s^2[/tex]
Acceleration of another cyclist, a'=[tex]\frac{30-0}{8}m/s^2[/tex]
Acceleration of another cyclist, a'=[tex]3.75m/s^2[/tex]
Yes, the acceleration of another cyclist is higher than the cyclist which accelerates from 0m/s to 8m/s.
The equation below represents the process that you observed. Balance the equation. What type of reaction?
6CO2 + 6H2O + light energy = 0C6H12O6 + 6O2 _______________________
That looks like photosynthesis to me and I think that should be an endothermic reaction because it requires energy.
A 12 kg object speeds up from an initial velocity of 10 m/s north to a final velocity of 15 m/s north. Calculate the change in momentum
Answer:
60m/s
Explanation:
momentum = Mass × Velocity
Initial Momentum = 12 × 10
= 120
Final Momentum = 12×15
=180
Change in Momentum = 180 - 120
= 60m/s
Answer:
60Explanation:
formula for change in momentum = F =∆p/∆t
F∆t = ∆p
∆p = m(v - Vo)
∆p = 12(15-10)
=12(5)= 60
An 6 kg object accelerating from 17 m/s to 10 m/s. What is the change in momentum of the object?
Answer:
- 42
Explanation:
m = 6kg
vi = 17 m/s
vf = 10 m/s
delta mv = ?
Formula
delta mv = m*(vf) - m(vi)
delta mv = 6(10 - 17)
delta mv = 6(-7)
delta mv = - 42 kg m/s
water is used in car radiators as coolant because of
Water is used as a coolant in automobiles radiators because it has high specific heat capacity. So, it absorbs a large amount of heat for a degree rise in temperature.
John is hiking and notices a small stream of water flowing down the side of the mountain. What part of the water cycle is John observing?
Question 3 options:
Runoff
Evaporation
Condensation
Precipitation
Answer:
A runoff
Explanation: A runoff is when frozen water melts so if it falls down a mouantan there probably melting ice hope this helps :} pls give brainlest
John is hiking and notices a small stream of water flowing down the side of the mountain. In this John is experiencing runoff of the water cycle. Thus, the correct option is A.
What is Runoff?Surface runoff is the flow of water which is occurring on the ground surface when there is excess rainwater, storm water, melt water, or other sources of water, which can no longer sufficiently rapidly infiltrate in the soil of the region.
Runoff occurs in the excessive rainwater and it saturates the ground surface. Rivers and lakes are the results of water runoff. There is some evaporation from the water runoff into the atmosphere however for the most part water in the rivers and lakes returns back to the oceans.
Therefore, the correct option is A.
Learn more about Runoff here:
https://brainly.com/question/2140871
#SPJ6
Which of the following is a compound that would
be the most soluble in water? (DOK 2)
O A nitrogen triargonide
O B. carbon tetrachloride
O C. lithium fluoride
O D. magnesium disulfide
Lithium fluoride will be most soluble in water because it is most strongly ionic.
What is solubility?Solubility is the amount of a substance that dissolves in a given volume of solvent at a particular temperature.
Solubility is affected by:
nature of substance: ionic substances are more soluble nature of solvent: polar solvents dissolves polar distance while non-polar solvents dissolve non-polar substances.temperature: solutesdissolve more at higher temperatureWater is a polar molecule.
Lithium fluoride will be most soluble in water because it is most strongly ionic.
Learn more about solubility at: https://brainly.com/question/23946616
A 6kg bowling ball is rolled down the bowling lane with a force of 42N, what is the acceleration of the ball?
Answer:
7 m/s²
Explanation:
F= ma
A= F/m = 42/6 = 7 m/s²