If water is so abundant on Earth, why are water resources such a big concern?
a. Water resources are not necessarily where humans need them and when they need them.
b. Humans are not very adept at exploiting water resources, so many go unused.
c. Most of the water on Earth is frozen in polar ice sheets.
d. Most of the water is caught up in the hydrologic cycle and is therefore not readily available.

The velocity of the cylinder when it moves downward s = 0.2m from its equilibrium position is; 1.55 m/s

At the equilibrium position, since;

F_sp = kx₀

We are given kAB = 120. Thus;

F_sp = 120x₀

Resolving forces about the y-axis gives;

∑f_y = 0, we have;

120x₀  - 4(9.81) = 0

x₀ = (6 * 9.81)/120

x₀ = 0.4905 m

Thus, when the 60 N force is applied, the compression of the spring is;

x = s + 0.4905 m

Thus;

F_sp = 120(s + 0.4905 m)

Then balancing of upward and downward forces gives us;

120(s + 0.4905) − 60 − 6(9.81) = 6(−a)

120s - 60 = -6a

a = 10 - 20s

At the initial condition v=0 at s = 0, we integrate to get the velocity;

v²/2 = 10s - 20s²

v = √(20s - 40s²)

At s = 0.2 m, we have;

v = √(20(0.2) - 40(0.2)²)

v = 1.55 m/s

Read more about Velocity of Cylinder at; https://brainly.com/question/9485953

#SPJ1

Tech B is correct it's a verified fact that some auto parts may contain asbestos.

Do auto parts contain asbestos?

Asbestos has been used in a wide range of automotive products, including brakes, clutches, hood liners, gaskets, heat shields, and many others.

Drum and disc brakes were traditionally made with 35% to 60% asbestos. It is still legal in the United States to sell asbestos-containing auto parts, and many brake and clutch parts contain up to 35% asbestos.

Contaminated parts have been found in vehicles of all types, including cars, trucks, motorcycles, buses, trains, and military vehicles. Elevators and other types of transportation machinery also used asbestos brakes.

To learn more about asbestos, visit: https://brainly.com/question/20715468

#SPJ4

After considering ϕϕ simply as a function, its domain is ⇒  [-4 , ∞).

When one or more functions and their derivatives are included in a mathematical equation, it is referred to as a differential equation. A function's derivatives at a given point determine how quickly the function will change.

Physicists, engineers, and biologists use it most frequently. Differential equations are primarily used to analyse solutions that satisfy the equations as well as the characteristics of the solutions. The differential equation can be solved in a variety of ways, but one of the simplest is by using explicit formulas.

y = x + 6√(x + 4)

⇒  y' = 1 + 6[ 1/(2√(x + 4))]      since d/dx xn = nxn-1 , d/dx √x = 1/(2√x)

⇒  y' = 1 + 3/√(x + 4)

(y -x)y' = (6√(x + 4))(1 + 3/√(x + 4)) = 6√(x + 4) + 18

y-x+18 = 6√(x + 4) + 18

ϕ(x) = x + 6√(x + 4)

Domain ⇒  x + 4 >= 0 ⇒  x >= -4

⇒ Domain ⇒  [-4 , ∞)

Learn more about Domain

https://brainly.com/question/28135761

#SPJ4

You must listen to all of the lesson's audio before you can take the exam. This is the appropriate assertion.

Students will be able to build deeper and longer lasting knowledge and a deeper comprehension of the scientific method through carefully planned laboratory exercises that emphasize inquiry-based or problem-based learning with attention to active learning under appropriate supervision.

Supporters of this method of learning assert that learning by ear enables one to be adaptable when carrying out a variety of jobs. This is due to the fact that information can be processed without the need of hands or eyes by simply listening to audio recordings.

To learn more about laboratory exercise visit:

brainly.com/question/26264658

#SPJ1

The ionic radius of Ca²⁺ is 100 pm, K⁺ is 138 pm, Cl⁻ is 181 pm, and S²⁻ is 184 pm, therefore option d is the right choice.

The influence of an ion's nucleus on its electron cloud extends outward to a distance called the ionic radius.

When an atom loses or gains an electron, an ion is created. A cation is formed when an atom loses an electron, and an anion is formed when an atom gains an electron. The ionic radius is the furthest point away from the ion's nucleus that its outermost shell can extend.

A cation's atomic size will be lower than that of its parent atom. Compared to its parent atom, an anion is comparatively large. That's because the net effective nuclear charge gets drowned out by the repulsion between electrons caused by an atom gaining electrons.

Want to know more about ionic radius visit the link which is given below;

https://brainly.com/question/6637706

#SPJ4

Answer:

0.00337339236

Answer:

Hey there! 16 divided by 4743 is approximately equal to 0.003366. This means that if you take 16 and divide it by 4743, the result will be a number that is very close to 0.003366. This division problem can be written as the fraction 16/4743, or as the decimal 0.003366.

________________________________________________________

Some common mistakes to avoid when solving division problems include forgetting to carry the remainder, failing to check for divisibility, and mixing up the order of the dividend and the divisor. It is also important to pay attention to the units of measurement and to ensure that the units in the dividend and the divisor are compatible.

Some strategies for solving division problems with large numbers include using place value to break down the numbers into smaller units, using long division or a calculator to perform the division, and using estimation to check the reasonableness of the answer. It can also be helpful to use mental math techniques, such as rounding, to simplify the division problem. Other strategies might include using division to find the prime factorization of a number or to identify common factors or multiples.

Answer: true

Explanation: I haves

Two different kinds of losses can happen in a three-phase induction motor. These losses are variable losses that are constant or fixed losses. Fixed or Constant Losses Consta.

Stator losses, including as stator iron loss and stator copper loss, are financed in part by this power input. Rotor input is provided with the leftover power, or (input electrical power - stator losses). Thus, rotor input P2 equals Pin minus stator losses (stator copper loss and stator iron loss).

Fixed losses, Copper losses, and stray losses are a few types of losses that can occur in three-phase induction motors. Core losses, bearing friction losses, brush friction losses (in wound rotor motors), and windage losses make up the majority of these losses.

To know more about  induction motor visit:-

https://brainly.com/question/29664815

#SPJ1

Answer:

It is critical for the upper and lower end sections of an engine to work perfectly together because they are responsible for converting fuel into motion, which is necessary for the engine to operate effectively.

The upper end section of an engine includes the cylinder head and valves, which are responsible for controlling the flow of fuel and air into the engine. The lower end section of an engine includes the crankshaft, connecting rod, and pistons, which are responsible for converting the fuel's energy into rotational motion.

If the upper and lower end sections of an engine are not working perfectly together, it can lead to a variety of problems, including reduced engine performance, reduced fuel efficiency, and increased emissions. It is therefore critical for the upper and lower end sections to be carefully designed and calibrated to work together seamlessly in order to ensure the optimal performance of the engine.

Technician A is the correct answer. He is correct in saying that after an accident, you should take precautions to avoid it happening again in the future.

First, look for any injuries. If someone is in pain, take care of them.

After that, move your car to a safer location where you can exchange names, addresses, phone numbers, vehicle identification numbers, vehicle license plate numbers, insurance information, and driver's license information.

Finally, take note of the crash site and obtain the names, addresses, and phone numbers of any witnesses. If the vehicles cannot be moved, set up flares or raise your hood to protect the scene.

To know more about vehicle accidents, visit:

brainly.com/question/1235714

#SPJ4

The following is a good technique for building safer structures in an earthquake zone is to use concrete-block construction.

What is an earthquake zone?
An earthquake zone is an area that is prone to frequent seismic activity. These zones are commonly located near active fault lines, where the Earth's tectonic plates constantly move. Earthquakes can cause significant damage to the local area, so it is important to be aware of the potential dangers of living in a seismically active region. In order to assess the risk, geologists and seismologists will measure the frequency and intensity of past earthquakes to determine the potential hazard posed by a particular area. Earthquake zones can also be classified according to their potential for danger, with some areas having a higher risk than others. It is important to remember that earthquakes can occur anywhere and that safety precautions should always be taken when living in a seismically active region.

To learn more about earthquake zone
https://brainly.com/question/17053867

#SPJ4

The branch circuit conductors for a 5 hp, 230V, single-phase motor with a nameplate rating of 25 A must have an ampacity of 30 A or greater.

What is circuit?
A circuit is an interconnection of electronic components that allows electricity, signals or data to flow from one component to another. It can be as simple as a single resistor or as complex as a microprocessor. Circuits are used to provide power to devices, control signals, process data or any combination of these. Circuits can be made from components such as resistors, capacitors, transistors, integrated circuits and microprocessors.

According to the National Electrical Code (NEC), the minimum branch circuit conductor size for a 5 hp, 230V, single-phase motor with a nameplate rating of 25 A must be sized at 30 A or greater. This is because the NEC requires a branch circuit conductor to have an ampacity at least 125% of the full-load current rating of the motor.

To learn more about circuit
https://brainly.com/question/30018555

#SPJ4

The velocity field isn't conservative, though.

What exactly is Velocity ?

Velocity is the direction at which an item is moving and serves as a measure of the rate at which its location is changing as seen from a particular point of view and as measured by a specific unit of time (for example, 60 km/h northbound). In kinematics, the area of classical physics that deals with the motion of bodies, speed is a basic idea.

A physical scalar quantity called velocity must have both a magnitude and a direction in order to be characterized. Speed is the scalar absolute value (intensity) of velocity; it is a coherent basic determinant whose quantity is measured in metres per second (m/s or m/s1) in the SI (measurement units).

To know more about Velocity
https://brainly.com/question/18084516
#SPJ4

You would expect each of the following to have a lower p50 qualitative effect on hemoglobin (5 pts) a) Raising the pH from 7.0 to 7.4.

On the forecasts, there is a "qualitative influence." Reliability and accuracy are two characteristics of forecasts. The dependability or accuracy of the forecasts may improve or worsen, depending on the qualitative effect.

Acitric Acids As an illustration, amino acid monomers make up proteins. A functional protein is created by folding a chain of linked polypeptides into a three-dimensional (3D) structure.

To know more about qualitative effect on hemoglobin visit :-

https://brainly.com/question/30216819

#SPJ4

gove it to me. I'll do my best

Answer:

In a single-family residence, a line-voltage thermostat is primarily used to control heating and cooling systems.

Using the formula of shear stress, the minimum required diameter is 0.81mm

Shear stress is a force that causes two objects to slide past each other in opposite directions. It is the force per unit area of the surface on which the force is applied. Shear stress is often caused by two objects rubbing against each other, such as a car tire sliding on the road. It can also be caused by wind, gravity, or other forces.

The shear stress on the shaft can be calculated using the formula:

τ(allow) = P/(2*π*d*J)

where P is the total power transferred by the shaft, d is the diameter of the shaft, and J is the polar moment of inertia.

J = π*d⁴/32

Substituting the given values,

τ(allow) = (15 + 6 + 4 + 5)/(2*π*d*π*d⁴/32)

d = √[32*(15 + 6 + 4 + 5)/(τ(allow)*2*π²)]

d = √[32*(30)/(75*2*π²)]

d = 0.81mm

The minimum required diameter of the shaft is 0.81 mm to the nearest millimeter.

Learn more shear stress here;

https://brainly.com/question/13670232

#SPJ1

The router will be informed of the appropriate host ID by the last octet, which is the octet of the sub-net mask 255.255.255.0.

In the IPv4 component of the address, one octet is referred to as x and is a decimal value between 0 and 255. Periods are used to separate the octets. Three periods and four octets are required in the IPv4 component of the address. People may have also heard the term "octets" used to describe the four numbers that make up an IP address. The right name for the four distinct digits that make up an IP address is an octet. The third octet of sub-netting is used to specify specific sub nets of network 150.150.0.0. In the example in the image, each sub-net number has a different value in the third byte, signifying that it is a separate sub-net number.

Learn more about Octets here:

https://brainly.com/question/28276191

#SPJ4

Availability of supplies and new markets are reasons why Boeing continues to expand internationally.

The Boeing Company is a global multinational American company that develops, produces, and markets aircraft, helicopters, rockets, satellites, telecommunications gear, and missiles. Additional services offered by the business include leasing and product support.

According to 2020 revenue, Boeing ranks third among the world's largest defence contractors. It is also the largest exporter from the United States in terms of dollar volume. Boeing is one of the biggest aerospace manufacturers in the world.

The Dow Jones Industrial Average counts Boeing stock as a component. Delaware serves as Boeing's corporate home. In Seattle, Washington, on July 15, 1916, William Boeing established Boeing. At the beginning of August 1997, Boeing and McDonnell Douglas merged to form the current corporation.

Learn more about Boeing Company

https://brainly.com/question/29679131

#SPJ4

It is TRUE that the Tactical ventilation should be performed only when the fire attack hoselines and teams are ready to advance toward the fire.

What is Tactical ventilation?

Through purposeful flow path management, the overarching goal of all forms of tactical ventilation is to improve interior tenability for occupants and firefighters.

Flow path management for control and extinguishment is best accomplished by placing ventilation openings as close to the source fire as possible (e.g., not in a remote location) and working in collaboration with the fire attack team (e.g., vent ahead of rather than behind the attack team).

Firefighters must constantly control their environment with hose stream techniques when using ventilation tactics and interior attack to cool and dilute the highly combustible smoke.

To know more about Tactical ventilation, visit: https://brainly.com/question/27841064

#SPJ4

a) the directivity of the antenna is evaluated to be = 1.761db

b) radiation efficiency is evaluated to be  = 98.67%

c) reflection efficiency gain is evaluated to be =  68%

Resonance is the relatively large selective response of an object or a system to an external oscillatory force that causes it to vibrate in step or phase. First, acoustical systems like musical instruments and the human voice were studied for resonance.

The total range of resonance frequencies was discovered to be independent of mass, height, and mass-to-height ratio, ranging from 9 to 16 Hz.

Therefore, the correct options are: a) 1.761 db., b) 98.67%., c) 68%.

To learn more about resonant, refer to the link:

https://brainly.com/question/29547999

#SPJ1

The process of creating sugar from raw sugar cane involves several steps. First, the raw cane is passed through a series of crushers to extract the juice from the cane.

A crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or rock dust.

This step also adds about 5% extra mass of water to the sugar cane to help with the extraction process. The crushed cane and liquid juice are then sent to a filter press, which creates a cake containing 4% of the weight of the cane juice. This cake has a composition similar to the overall non-fiber content of the raw cane. The filtrate is then sent to an evaporator, where enough water is evaporated to obtain a pale yellow juice that is 41% water. Finally, the liquid is crystallized to produce sugar crystals, which are typically about 99.8% sucrose.

To learn more about crusher
https://brainly.com/question/15352898
#SPJ4

For gas piping other than black or galvanized steel installed in a concealed location, where a bored hole is located a maximum of 1/2 inch from the edge of the wood member.

What is galvanized steel?
Galvanized steel is a type of steel that has been treated with a layer of zinc oxide to protect it from corrosion. This layer is bonded to the steel so that it will not flake or peel off. Galvanized steel is often used in the construction industry because it is highly resistant to rust and other forms of corrosion. It is also used in the automotive and appliance industries as well as in the production of water pipes, fencing, and other metal items. Galvanized steel is cost-effective and easy to maintain, making it a popular choice for many applications. It is also environmentally friendly since it does not require the use of chemicals or paints. Galvanized steel is a durable and versatile material that is essential for many projects.

To learn more about galvanized steel
https://brainly.com/question/14835168

#SPJ4

A 2 HP, 120 V, single phase motor requires a 20 ampere inverse time circuit breaker branch circuit short circuit and ground fault protective device.

What is circuit?
A circuit is an electrical path between two or more points that allow electricity to flow. It consists of various components like resistors, capacitors, transistors, diodes, and wires. Each component serves as a building block to create a functioning circuit. Circuits are used to control and direct electricity to power a variety of devices like computers, televisions, radios, and more. They are at the heart of any electrical system, from the most simple to the most complex. By properly combining the components in a circuit, electricity can be directed to flow in the desired manner and perform the required tasks. Circuit design is an important engineering field and can be used to create many practical applications.

To learn more about circuit
https://brainly.com/question/30018555

#SPJ4

Answer:

Lighting track is not permitted to be installed within a zone extending 3 feet horizontally and 8 feet vertically from the top of a bathtub rim.

Explanation:

Answer: B, plumb bob

Explanation:

A plumb bob's main job was to establish what is true (ie vertical and perpendicular to a surface,) as well as the secondary task of marking these points.

Compasses are mainly used to draw circles, protractors are used to measure angles, and rulers are used to measuring length.

The size of RHW copper conductors needed for this 3-phase, 240-volt load is 4/10 AWG.

Copper conductors are electrical wires composed of copper that are used to carry electrical currents. They are used in a variety of applications, including power generation and transmission, electronics, telecommunications, and consumer products. Copper is an ideal material for electrical conductors because it is highly conductive, durable, and cost-effective. Copper conductors are available in a range of sizes and shapes and are used in both residential and commercial settings.

This is based on the National Electrical Code (NEC) Table 310.15(B)(16), which states that the minimum size for a 196 ampere load is 4/10 AWG for three insulated conductors in an EMT conduit.

To learn more about copper conductors
https://brainly.com/question/14941254
#SPJ4

The principal of the loan that TMI Systems repaid was $90,000.

The formula to calculate the principal of a loan is P = L + I, where P is the principal, L is the loan amount, and I is the total interest paid over the duration of the loan.

In this case, we are given that the loan amount was 10% per year simple interest, which can be calculated by multiplying the principal by the interest rate (0.1) and the duration of the loan (5 years). Therefore, the total interest paid over the duration of the loan is P x 0.1 x 5 = $50,000.

We are also given the total amount repaid, which is the sum of the principal and the total interest paid. Therefore, we can calculate the principal by subtracting the total interest paid from the total amount repaid.

This gives us $140,000 - $50,000 = $90,000. As the principal must be a positive value, the principal of the loan is $90,000.

For more questions like Principal click the link below:

https://brainly.com/question/17960115

#SPJ4

Answer:

s = 6.6

-25 + 5 × 6.6 = 8

Just let me know if you need any more help.