In LMN MN=15cm, LP is perpendicular to MN, LP=100 angle PLN=PNL. Calculate the length of LN​

The graph of the equation 7x² + 3 = y² is symmetric with respect to B. X-axis and y-axis only.

To test for symmetry with respect to the x-axis, y-axis, and the origin, we need to check if replacing 'x' with '-x', 'y' with '-y', or both leaves the equation unchanged.

For the given equation, when we replace 'x' with '-x', the equation becomes 7(-x)² + 3 = y², which simplifies to 7x² + 3 = y². This indicates that the equation remains the same, so the graph is symmetric with respect to the y-axis.

When we replace 'y' with '-y', the equation becomes 7x² + 3 = (-y)², which simplifies to 7x² + 3 = y². Again, the equation remains the same, indicating symmetry with respect to the origin.

However, when we replace both 'x' with '-x' and 'y' with '-y', the equation becomes 7(-x)² + 3 = (-y)², which simplifies to 7x² + 3 = y². Here, the equation does not remain the same, indicating that the graph is not symmetric with respect to the x-axis.

To visually verify these symmetries, one can use a graphing calculator to plot the graph of the equation. The graph will exhibit symmetry with respect to the y-axis and the origin, but not with respect to the x-axis. Therefore, the correct answer is B. X-axis and y-axis only.

Learn more about symmetry here:

https://brainly.com/question/29044130

#SPJ11

The velocity of air at the throat using the local speed of sound at the given pressure and temperature conditions.

The velocity of air at the throat of the converging-diverging nozzle can be calculated using the principle of continuity and the isentropic flow equation. It is a function of the Mach number, which is constant at the throat, and the local speed of sound.

To calculate the velocity of air at the throat, we need to use the principle of continuity, which states that the mass flow rate of a fluid remains constant as it passes through a converging-diverging nozzle. This means that the mass flow rate at the throat is the same as the mass flow rate at the inlet and outlet of the nozzle.

Using the isentropic flow equation, we can relate the velocity of the air to the Mach number and the local speed of sound. At the throat, the Mach number is equal to 1, which means that the velocity of the air is equal to the local speed of sound. Therefore, we can calculate the velocity of air at the throat using the local speed of sound at the given pressure and temperature conditions.

Learn more about temperature here

https://brainly.com/question/26866637

#SPJ11

The number of real roots for the function​s are

From the question, we have the following parameters that can be used in our computation:

The graphs

The number of real roots of a function​ is the number of times the function intersects with the x-axis

This in other words means the zeros of the function

Using the above as a guide, we have the roots of the graphs to be

Graph 1 = 4

Graph 2 = 1

Graph 3 = 2

Graph 4 = 0

Graph 5 = 1

Graph 6 = 1

Read more about function​ at

https://brainly.com/question/16550963

#SPJ1

Given that Elana sells 3a adult tickets. The number of adult tickets that Elana sells is 15. The question is whether Elana sells at least 100 total tickets.

Elana sells 3a adult tickets, where a is the number of tickets sold. Therefore, the number of adult tickets Elana sells is 3a = 15. Dividing both sides by 3, we geta = 5So, Elana sells 5 adult tickets. To find out whether Elana sells at least 100 tickets, we need to know the number of non-adult tickets sold.

If we assume that all tickets are either adult or non-adult, we can say that the total number of tickets sold is 5 + n, where n is the number of non-adult tickets sold. Since we don't know the value of n, we cannot determine if the total number of tickets sold is at least 100. Thus, the answer to the question is not clear from the information provided.

Know more about Dividing both sides  here:

https://brainly.com/question/14534440

#SPJ11

Let x be the cost of one rose bush and y be the cost of one carnation.

Then we have the system of equations:

x * 9 + y * 12 = 210

x * 3 + y * 1 = 40

To determine the method that is most efficient to solve this system, we can use the fact that one of the equations has already solved for one of the variables, y.

We can use substitution to solve for the other variable, x.

Substitute y = (40 - 3x) into the first equation:

x * 9 + (40 - 3x) * 12 = 210

Simplify:

x * 9 + 480 - 36x = 210

Solve for x:

9x - 36x = 210 - 480

-27x = -270

x = 10

Substitute x = 10 into the second equation:

10 * 3 + y = 40

Solve for y:

y = 10

Therefore, one rose bush costs $10 and one carnation costs $10.

The most efficient method to solve the system was substitution, since one of the equations already solved for one of the variables.

To know more about variable visit:

https://brainly.com/question/15078630

#SPJ11

The optimal price for the movie theatre owner to make the highest profit is Rs. 480.

To determine the price at which the movie theater owner can make the highest profit, the relationship between ticket price, attendance, and costs.

Define the variables:

P = Ticket price (in Rs.)

A = Attendance

C = Cost per performance (Rs. 18,000)

Cost per attendee = Rs. 4

Profit = Revenue - Cost

Determine the relationship between price and attendance:

From the given information, we know that when the ticket price is Rs. 500, the attendance is 120. Decreasing the price by Rs. 10 increases attendance by 15. We can represent this relationship as follows:

P = 500 - (A - 120) / 15 × 10

Calculate revenue:

Revenue is the product of ticket price and attendance:

Revenue = P * A

Calculate cost:

Cost is the sum of the cost per performance (C) and the cost per attendee (Rs. 4) multiplied by the attendance (A):

Cost = C + (A × 4)

Calculate profit:

Profit is the difference between revenue and cost:

Profit = Revenue - Cost

To know more about profit  here

https://brainly.com/question/29987711

#SPJ4

There are 324,632 six-digit strings with a digit sum of 35.

To find the number of six-digit strings with a digit sum of 35, we'll use the "stars and bars" combinatorial method.

Since we're looking for six-digit strings, subtract the minimum possible value for each digit (1) from the total digit sum: 35 - 6 = 29. This means we need to distribute 29 units among the six digits.

Use the "stars and bars" method, which involves placing "bars" between "stars" to divide them into groups. In this case, the stars represent the units to be distributed, and we need to place 5 bars to divide the 29 units into 6 groups.

Count the total number of stars and bars: 29 stars + 5 bars = 34 objects.

Calculate the number of ways to choose 5 bars from 34 objects: C(34, 5) = 34! / (5! * (34 - 5)!).

Evaluate the expression: C(34, 5) = 34! / (5! * 29!) = 324,632.

So, there are 324,632 six-digit strings with a digit sum of 35.

Learn more about digit sum

brainly.com/question/30421976

#SPJ11

Descriptive statistics is the branch of statistics that focuses on summarizing and describing the characteristics of a given set of data. One of the major goals of descriptive statistics is to use information obtained from a small sample to make predictions about the characteristics of an entire population.

By analyzing data from a representative sample, descriptive statistics can help researchers understand key features of a population, such as the average or central tendency of the data, the range or spread of the data, and the shape or distribution of the data. Ultimately, the goal of descriptive statistics is to provide researchers with the tools and insights they need to make informed decisions and draw accurate conclusions about the population as a whole.

If you need to learn more about descriptive statistics, click here

https://brainly.in/question/21534582?referrer=searchResults

#SPJ11

The estimate for the number of times a person's heart beats in their lifetime is approximately [tex]6.2 x 10^8.[/tex]

To estimate the number of times a person's heart beats in their lifetime, we need to calculate the total number of heartbeats per day and then multiply it by the number of days in a person's lifetime.

Given that a person's heart beats approximately [tex]10^5[/tex] times each day, we can multiply this value by the number of days in 81 years. To convert years to days, we multiply 81 by 365 (assuming there are 365 days in a year).

Calculating the total number of heartbeats in a lifetime:

Number of heartbeats per day = [tex]10^5[/tex][tex]6.2 x 10^8.[/tex]

Number of days in 81 years = 81 * 365

Total number of heartbeats in a lifetime = [tex](10^5) * (81 * 365)[/tex]

Simplifying the calculation:

Total number of heartbeats in a lifetime = [tex]8.1 x 10^4 * 2.96 x 10^4[/tex]

Multiplying the values:

Total number of heartbeats in a lifetime = 2.3976 x 10^9

Rounding to two significant figures:

Total number of heartbeats in a lifetime ≈[tex]6.2 x 10^8[/tex]

Therefore, the estimate for the number of times a person's heart beats in their lifetime is approximately[tex]6.2 x 10^8.[/tex]

Learn more about number here:

https://brainly.com/question/3589540

#SPJ11

This confidence interval indicates that we are 99% confident that the true population mean depression score of juveniles living in a group home is between 72.96 and 77.04. Hence, we can say that the sample of juveniles living in a group home with a mean score of 75 on a measure of depression is unlikely to be a chance effect.

Confidence Interval:The confidence interval provides a range of values within which the true population mean is likely to lie with a given probability (level of confidence).Calculating Confidence Interval:To calculate the confidence interval, the formula used is:CI = X ± Zc (SEM)WhereX is the sample meanZc is the critical value of the standard normal distribution corresponding to a given level of confidence (Zc = 2.58 for a 99% confidence level)SEM is the standard error of the meanSEM = SD / √nWhereSD is the sample standard deviationn is the sample sizeCalculation of Confidence Interval:Given,Sample mean, X = 75SD = 2.5n = sample sizeFor a 99% confidence level, Zc = 2.58 (from standard normal distribution table)SEM = 2.5 / √n99% confidence interval is calculated as follows:CI = X ± Zc (SEM)CI = 75 ± 2.58(2.5/√n)CI = 75 ± 2.04CI = (75 - 2.04, 75 + 2.04)CI = (72.96, 77.04)Therefore, the 99% confidence interval is (72.96, 77.04).Results:This confidence interval indicates that we are 99% confident that the true population mean depression score of juveniles living in a group home is between 72.96 and 77.04. Hence, we can say that the sample of juveniles living in a group home with a mean score of 75 on a measure of depression is unlikely to be a chance effect.

Learn more about Juveniles justice here,Is a juvenile justice system necessary? Why or why not?

Is a juvenile justice system necessary? Why or why not?Explain in 5-6 complete sentences.

Is a juvenile justice system necessary? Why or why not?Explain in 5-6 complete sentences. https://brainly.com/question/13782226

#SPJ11

To express the sum of the terms 2k using sigma notation, we can write it as follows:

∑(2k)

The sigma notation represents the sum of terms, where the variable k takes on values starting from 2 and increasing by 1 until it reaches 5.

Now, let's evaluate this sum:

∑(2k) for k = 2, 3, …, 5

= (2 * 2) + (2 * 3) + (2 * 4) + (2 * 5)

= 4 + 6 + 8 + 10

= 28

Therefore, the sum of the terms 2k for k = 2, 3, …, 5 is 28.

The voltage (E) for the given electrochemical reaction is ________.

The voltage (E) for an electrochemical reaction can be determined using the Nernst equation, which relates the concentrations of reactants and products to the cell potential. In this case, the given electrochemical reaction is:

Ni^2+ (aq) + Pb(s) ⇌ Ni(s) + Pb^2+ (aq)

To calculate the voltage (E), we need to use the Nernst equation:

E = E° - (RT / nF) * ln(Q)

Where:

E is the cell potential,

E° is the standard cell potential,

R is the gas constant (8.314 J/(mol·K)),

T is the temperature in Kelvin,

n is the number of electrons transferred in the reaction,

F is the Faraday constant (96,485 C/mol),

ln is the natural logarithm,

and Q is the reaction quotient.

Given the concentrations:

[Ni^2+] = 2.1 x 10^(-1) M

[Pb^2+] = 8.1 x 10^(-7) M

The reaction quotient (Q) is calculated as the ratio of the concentrations of products to reactants, each raised to their stoichiometric coefficients. In this case:

Q = [Ni(s)] * [Pb^2+ (aq)] / [Ni^2+ (aq)] * [Pb(s)]

Substituting the given values into the Nernst equation and solving for E will yield the voltage for this cell reaction at the given concentrations.

Learn more about electrochemical reactions

brainly.com/question/31236808

#SPJ11

The formula for the area of a circle A = πr^2, where A is the area, π is the mathematical constant pi, and r is the radius.

In this case, the radius So, the area of the tabletop is:

A = πr^2

A = (22/7) x (5/2)^2

A = (22/7) x (25/4)

A = 550/28 radius is given as 2 1/2 feet, or 5/2 feet in fractional form.

A = 19 11/28 square feet

Therefore, the area of Melba's tabletop is approximately 19 11/28 square feet

To Know more about area of circle refer here

https://brainly.com/question/28642423#

#SPJ11

Therefore, the increasing frequency of purple-flowered alleles shows that the population is evolving.

that may be drawn from the data in the table is "The increasing frequency of purple-flowered alleles shows that the population is evolving".

Explanation: Frequency of alleles for flower color in three generations of peas in a garden are provided in the table as below: Generation p q1 0.6 0.42 0.7 0.33 0.8 0.2

In the given question, purple flower color (C) is dominant to white flower color (c). The table above shows the frequencies of the dominant and recessive alleles in three generations of peas in a garden.

In the first generation (G1), 60% of the plants have the dominant (C) allele and 40% have the recessive (c) allele. In the second generation (G2), the frequency of the dominant (C) allele increases to 70% while the frequency of the recessive (c) allele decreases to 30%.

In the third generation (G3), the frequency of the dominant (C) allele further increases to 80% while the frequency of the recessive (c) allele further decreases to 20%.

Therefore, The increasing frequency of purple-flowered alleles shows that the population is evolving.

To know more about frequency visit:

https://brainly.com/question/29739263

#SPJ11

The list which is in order from least to greatest is 1.94 times 10 Superscript negative 5, 1.25 times 10 Superscript negative 2, 8.1 times 10 Superscript 4, 6 times 10 Superscript 4.

The list which is in order from least to greatest is 1.94 times 10 Superscript negative 5, 1.25 times 10 Superscript negative 2, 8.1 times 10 Superscript 4, 6 times 10 Superscript 4.What is an order from least to greatest?An order from least to greatest means arranging the given numbers in order from the smallest to the largest. This arrangement is important as it helps in simplifying problems that require data in a sequence. To solve this problem, we have to compare the given numbers and arrange them in order from smallest to largest. Here are the given numbers:

1. 94 times 10 Superscript negative 5 1. 25 times 10 Superscript negative 2 6 times 10 Superscript 4 8. 1 times 10 Superscript 4Now we can compare these numbers and arrange them in order from smallest to largest. Let's compare the first two numbers:

1. 94 times 10 Superscript negative 5 < 1.25 times 10 Superscript negative 2Thus, the first two numbers in order from least to greatest are 1.94 times 10 Superscript negative 5 and 1.25 times 10 Superscript negative 2. Now we can compare these numbers with the next two numbers:

1.94 times 10 Superscript negative 5 < 8.1 times 10 Superscript 4 < 6 times 10 Superscript 4 < 1.25 times 10 Superscript negative 2Thus, the list which is in order from least to greatest is 1.94 times 10 Superscript negative 5, 1.25 times 10 Superscript negative 2, 8.1 times 10 Superscript 4, 6 times 10 Superscript 4.

To know more about Superscript visit:

https://brainly.com/question/25274736

#SPJ11

They didn't meet the 30 yard objective.

Andrew is playing football. In one game, he ran the ball 24 1/3 yards. On the following play, he lost 3 2/3 yards and was tackled. On the last play, he ran 5 1/4 yards. The team needs to be roughly 30 yards down the field following these three plays.

The team's advancement on the first play was 24 1/3 yards. In the second play, Andrew loses 3 2/3 yards, which can be represented as -3 2/3 yards, so we'll subtract that from the total. In the third play, Andrew gained 5 1/4 yards.

The team's advancement can be calculated by adding up all of the plays.24 1/3 yards - 3 2/3 yards + 5 1/4 yards = ?21 2/3 + 5 1/4 yards = ?26 15/12 yards = ?29/12 yards ≈ 2 5/12 yards

The team progressed approximately 2 5/12 yards. They are not near the 30 yard line, so they didn't meet the 30 yard objective.

Know more about  yard here,

https://brainly.com/question/14516546

#SPJ11

To determine the size of carpets that will maximize the company's revenue, we need to find the dimensions that will generate the highest total sales. Let's analyze the situation step by step.

We know that the company can sell 200 carpets per week when the size is 3ft by 3ft. Beyond this size, for each additional foot of length and width, the number sold decreases by 4.

Let's denote the additional length and width beyond 3ft as x. Therefore, the dimensions of the carpets will be (3 + x) ft by (3 + x) ft.

Now, we need to determine the relationship between the number of carpets sold and the dimensions. We can observe that for each additional foot of length and width, the number sold decreases by 4. So, the number of carpets sold can be expressed as:

Number of Carpets Sold = 200 - 4x

Next, we need to calculate the revenue generated from selling these carpets. The price per square foot is $5, and the area of the carpet is (3 + x) ft by (3 + x) ft, which gives us:

Revenue = Price per Square Foot * Area

= $5 * (3 + x) * (3 + x)

= $5 * (9 + 6x + [tex]x^2)[/tex]

= $45 + $30x + $5[tex]x^2[/tex]

Now, we can determine the dimensions that will maximize the revenue by finding the vertex of the quadratic function. The x-coordinate of the vertex gives us the optimal value of x.

The x-coordinate of the vertex can be found using the formula: x = -b / (2a), where a = $5 and b = $30.

x = -30 / (2 * 5)

x = -30 / 10

x = -3

Since we are dealing with dimensions, we take the absolute value of x, which gives us x = 3.

Therefore, the additional length and width beyond 3ft that will maximize the revenue is 3ft.

The dimensions of the carpets that the company should sell to maximize its revenue are 6ft by 6ft.

To calculate the maximum weekly revenue, we substitute x = 3 into the revenue function:

Revenue = $45 + $30x + $[tex]5x^2[/tex]

= $45 + $30(3) + $5([tex]3^2)[/tex]

= $45 + $90 + $45

= $180

Hence, the maximum weekly revenue for the company is $180.

Learn more about statistics here:

https://brainly.com/question/31527835

#SPJ11

Thus, the velocity function v(t) for the given  acceleration of a model car is given:

v(t) = { 1-t cm/sec for 0<=t<1;
        1 cm/sec for t>=1 }.

The given acceleration function is att)-1cm/sec', which means that the acceleration is negative and constant at -1cm/sec' for all values of t less than 1. We also know that the initial velocity at t=0 is 1 cm/sec.

To find the velocity function v(t), we need to integrate the acceleration function with respect to time.

For t less than 1, we have

att) = dv/dt = -1
Integrating both sides with respect to t, we get
v(t) - v(0) = -t
Substituting v(0) = 1 cm/sec, we get
v(t) = 1 - t cm/sec for 0<=t<1

For t greater than or equal to 1, the acceleration is zero, which means the velocity is constant.
Using the initial velocity at t=0 as 1 cm/sec, we have
v(t) = 1 cm/sec for t>=1

Therefore, the velocity function v(t) is given by
v(t) = { 1-t cm/sec for 0<=t<1;
        1 cm/sec for t>=1 }

Thus, the  velocity function v(t) for the given  acceleration of a model car is given v(t) = { 1-t cm/sec for 0<=t<1;
        1 cm/sec for t>=1 }.

Know more about the velocity function

https://brainly.com/question/25749514

#SPJ11

The equivalent equation for a two-input XOR gate is y = ab’ + a’b.

A two-input XOR gate is a logic gate that outputs a high or 1 signal only when the two inputs are different. In other words, the output of an XOR gate is 1 when one input is 0 and the other input is 1, and vice versa.

To represent an XOR gate with an equation, we can use Boolean algebra. The Boolean expression for an XOR gate is y = ab’ + a’b, where y is the output, a and b are the two inputs, and a' and b' represent the complement (or NOT) of a and b, respectively.

This equation can be derived using the laws of Boolean algebra. For example, we know that the product of a variable and its complement is always 0, i.e., a a' = 0. Using this property, we can simplify the equation y = ab’ + a’b as follows:

y = ab’ + a’b
 = ab’ + ab’’ + a’b     (adding a' and b')
 = ab’ + a’b + ab’’    (rearranging terms)
 = ab’(1) + a’b(1)     (using a a' = 0 and b b' = 0)
 = ab’ + a’b            (simplifying)

To learn more about : equation

https://brainly.com/question/17145398

#SPJ11

A rhombus is a quadrilateral with all sides of equal length, but its angles are not necessarily equal. The area of the rhombus is √3.

In this case, we are given that one of the angles of the rhombus is 120°. Since opposite angles in a rhombus are congruent, we know that all four angles of the rhombus are 120°.

To find the area of the rhombus, we need to know the length of one of its diagonals. In this case, the shorter diagonal has a length of 2.

The formula for the area of a rhombus is given by the product of the diagonals divided by 2:

Area = (d1 * d2) / 2

Since the rhombus is symmetrical, the diagonals bisect each other at right angles, forming four congruent right-angled triangles. Each of these triangles has a base of 1 (half the length of the shorter diagonal) and a height of √3 (half the length of the longer diagonal).

Therefore, the area of each triangle is (1 * √3) / 2 = √3 / 2.

Since there are four congruent triangles, the total area of the rhombus is 4 * (√3 / 2) = 2√3.

Hence, the area of the rhombus is √3.

Learn more about rhombus here:

https://brainly.com/question/12665650

#SPJ11

The probability that student chosen at random is 16 years is 0.28.

The table shows the distribution of student by age in a high school with 1500 students. Therefore, the probability that randomly chosen student is  16 years can be found as follows:

Therefore,

probability = number of favourable outcome to age / total number of possible outcome

Hence,

probability that student chosen at random is 16 years =  420 / 150

probability that student chosen at random is 16 years = 0.28

learn more on probability here: https://brainly.com/question/23776861

#SPJ1

The expressions that are equivalent to 312 • 79 are (33)9 • (73)6 and 320 • (73)3 • (34)–2.

To determine which expressions are equivalent to 312 • 79, we need to evaluate each option and compare the results.  

First, let's consider (33)9 • (73)6. Here, (33)9 means raising 33 to the power of 9, and (73)6 means raising 73 to the power of 6. By evaluating these powers and multiplying the results, we obtain the product.

Next, let's examine 320 • (73)3 • (34)–2. Here, (73)3 means raising 73 to the power of 3, and (34)–2 means taking the reciprocal of 34 squared. By evaluating these values and multiplying them with 320, we obtain the product.

Expressions yield the same result as 312 • 79, confirming their equivalence. The other options listed do not produce the same value when evaluated, and thus are not equivalent to 312 • 79.

Learn more about expression here:

https://brainly.com/question/28170201

#SPJ11

Answer:

(a) 1, 2, 3, 4, 6, 8, 12, 24

(b) 1, 2, 3, 4, 6, 9, 12, 18, 36

(c) 1, 5, 7, 35

(d) 1, 2, 4, 8, 16, 32

The distance between the hyperplane (5 + 3x1 + 4x2 = 0) and the origin is 1.

To find the distance between a hyperplane and the origin, we can use the formula for the distance between a point and a plane.

In this case, the hyperplane is defined by the equation 5 + 3x1 + 4x2 = 0.

To find the distance between the hyperplane and the origin, we can substitute the coordinates of the origin (0, 0) into the equation of the hyperplane and calculate the absolute value of the result:

Distance = |5 + 3(0) + 4(0)| / √(3^2 + 4^2)

= |5| / √(9 + 16)

= 5 / √25

= 5/5

= 1

Therefore, the distance between the hyperplane (5 + 3x1 + 4x2 = 0) and the origin is 1.

Learn more about hyperplane at https://brainly.com/question/31744837

#SPJ11

It allows users to create, rename, and delete directories, as well as move files from one directory to another.

In case of DOS, a group of files and other folders and directories is called a directory.

DOS, or Disk Operating System, was the first widely used operating system for IBM-compatible personal computers.

A directory is a file system concept in which a group of files and other folders and directories is combined together.

The term folder is synonymous with the term directory. In Windows and other modern operating systems, the term folder is more commonly used instead of directory.

DOS utilizes directories to keep files organized. It allows users to create, rename, and delete directories, as well as move files from one directory to another.

To know more about file visit

https://brainly.com/question/30189428

#SPJ11

Answer: We can evaluate the iterated integral in the following order:

First, we integrate with respect to z from 0 to xy:

∫ xy 0 y^(-1)z dz = 1/2y^(-1)z^2 |_0^xy = 1/2x^2

Next, we integrate the result with respect to y from 1 to x:

∫ 1+x 1 1/2x^2 dy = 1/2x^2[y]_1^(1+x) = 1/2x^2(1+x-1) = x^3/4

Finally, we integrate the previous result with respect to x from 0 to 1:

∫ 1 0 x^3/4 dx = 1/4 * x^4/4 |_0^1 = 1/16

Therefore, the value of the iterated triple integral is 1/16.

The approximate change in z for the given change in the independent variables is 0.61.

To approximate the change in z for the given change in the independent variables, we can use differentials. The differential of z can be expressed as:

dz = (∂z/∂x)dx + (∂z/∂y)dy

First, let's find the partial derivatives (∂z/∂x) and (∂z/∂y) by taking the partial derivatives of the function z = x^2 - 7xy with respect to x and y, respectively.

∂z/∂x = 2x - 7y
∂z/∂y = -7x

Next, we'll substitute the values of x, y, dx, and dy into the differentials equation. Given that (x, y) changes from (5, 3) to (5.04, 2.97), we have:
x = 5
y = 3
dx = 0.04
dy = -0.03

Substituting these values into the equation dz = (∂z/∂x)dx + (∂z/∂y)dy, we get:

dz = (2(5) - 7(3))(0.04) + (-7(5))( -0.03)
= (10 - 21)(0.04) + (-35)( -0.03)
= (-11)(0.04) + (1.05)
= -0.44 + 1.05
= 0.61

To learn more about independent variables go to:

https://brainly.com/question/17034410

#SPJ11

Answer: 7x7 =49

Step-by-step explanation: because that’s the square root of 7

A value of the mathematical expression is,

⇒ 7x²

We have to give that,

An algebraic expression is,

''The product of 7 and the square of a number.''

Let us assume that,

A number = x

Hence, We can write a mathematical expression is,

⇒ 7 × x²

⇒ 7x²

Thus, We get;

⇒ 7x²

Learn more about the mathematical expression visit:

brainly.com/question/1859113

#SPJ6

The determinant of the given matrix in terms of the variable a is a^2 + 5a + 2.

To compute the determinant of the given matrix, we can use the Laplace expansion along the first row. Let's denote the matrix as A:

A = [1 2 -2; 0 a -1; 2 -1 a]

Expanding along the first row, we have:

det(A) = 1 * det(A11) - 2 * det(A12) + (-2) * det(A13)

where det(Aij) represents the determinant of the matrix obtained by removing the i-th row and j-th column from A.

Now let's calculate the determinant of each submatrix:

det(A11) = det([a -1; -1 a]) = a^2 - (-1)(-1) = a^2 + 1

det(A12) = det([0 -1; 2 a]) = (0)(a) - (-1)(2) = 2

det(A13) = det([0 a; 2 -1]) = (0)(-1) - (a)(2) = -2a

Substituting these determinants back into the Laplace expansion formula:

det(A) = 1 * (a^2 + 1) - 2 * 2 + (-2) * (-2a)

= a^2 + 1 - 4 + 4a

= a^2 + 4a - 3

Simplifying further, we obtain:

det(A) = a^2 + 4a - 3

= a^2 + 5a + 2

Therefore, the determinant of the given matrix in terms of the variable a is a^2 + 5a + 2

To learn more about determinant, click here: brainly.com/question/31348795

#SPJ11

The given vector X, which is X = [sin(t), 1, sin(t), cos(t), 2, -sin(t) + cos(t)], is a solution of the given system X' = [10, 1, 1, 0, x] by substituting the values of X and X' into the system equation.

1. To verify that the vector X is a solution of the given system, we substitute X and X' into the system equation X' = [10, 1, 1, 0, x]. Let's evaluate each component of the equation.

2. The first component: X' = 10. When we substitute the values of X into this component, we have sin(t) = 10. Since this equation is not true for any value of t, we can conclude that the first component is not a solution.

3. The second component: X' = 1. Substituting the values of X, we have 1 = 1, which is true. Thus, the second component is a solution.

4. The third component: X' = 1. Substituting the values of X, we have sin(t) = 1, which is true for certain values of t. Therefore, the third component is a solution.

5. The fourth component: X' = 0. Substituting the values of X, we have cos(t) = 0, which is true for t = π/2 + kπ, where k is an integer. So, the fourth component is a solution.

6. The fifth component: X' = x. Since we don't have a specific value for x, we can't evaluate this component. The last component: X' = -sin(t) + cos(t). Substituting the values of X, we have -sin(t) + cos(t) = -sin(t) + cos(t), which is true. Therefore, the last component is a solution.

7. In conclusion, based on the evaluation of each component, we can say that the vector X = [sin(t), 1, sin(t), cos(t), 2, -sin(t) + cos(t)] is a solution of the given system X' = [10, 1, 1, 0, x].

learn more about vector here: brainly.com/question/30958460

#SPJ11