Increasing the catalytic stability by optimizing the formation of zeolite-supported Mo carbide species ex situ for methane dehydroaromatization

Answer:

1.5 moles

Explanation:

To find the number of moles of HCl in 500 mL of a 3 M solution of HCl, we consider moles in 1 liter/ 1000 mL.

3 moles HCl is contained in 1000 mL

x moles is HCl is contained in 500 mL

[tex] = \frac{3 \: \times \: 500}{1000} \: moles \\ = 1.5 \: moles[/tex]

Hence the number of moles of HCl in 500 mL is 1.5 moles.

The formula in Excel to verify the lowest value of your data range, is with the MIN function.

Its syntax is as follows: MIN (number1, [number2], ...) number1, [number2], ... is the series of values from which you want to obtain a minimum.

The MIN function can be used to find the smallest value in a column or in a group of cells. This function is especially useful for finding the minimum value in a data set that contains numeric values. Additionally, it can also be used to find the minimum of other types of values such as dates, times, and text.

The MIN function can be used to find the minimum value in a column as well as in a row. This means that it can be used to find the minimum value in an entire data table. It is also possible to find the minimum value in a specific subquery.

Learn more about The MIN function Excel:

https://brainly.com/question/11385568

#SPJ4

The amount of a particular substance in a given quantity of a mixture is the concentration.

Substances move from high concentration to low concentration.

The amount of a particular substance in a given quantity of a mixture is known as the concentration of that substance.

The amount of solute in a specific amount of solution is how concentrated a material is.

The concentration of a substance can be expressed as molar concentration or mass concentration.

Molarity, or the number of moles of solute in one liter of solution, is the standard unit of concentration expression.

Learn more about molarity and concentration at: https://brainly.com/question/14469428

#SPJ1

The volume of water that must be add is 20 mL. Volume of water that must add is new volume after dilution minus initial volume.

As per data given:

Initial volume (V1) = 40 mL = 0.040 L

Initial molarity(C1) = 9.0 M

New molarity (C2)= 6.0 M

As we want to know to the new volume of water(V2). We have to use dilution formula where the formula is C1 x V1 = C2 x V2. So, the calculation would be:

9.0 x 0.040 = 6.0 x V2

V2 = 0.06 L

V2 = 60 mL

Since the addition water is the difference between V2 and V1:

Volume add = V2 -V1

Volume add = 60 - 40

Volume add = 20 mL

Learn more about dilution here

https://brainly.com/question/24881505

#SPJ4

The products of the reactants with the balanced chemical equation are:

3 Ca + 2 HCl → 3 CaCl₂ + H₂.

A chemical equation involves reactants, products produced, and an arrow to show the direction of the reaction.

The chemical equation of the reaction in which the number of atoms of each element is the same on both sides of the equation is known as a balanced chemical equation.

The law of conservation of matter needed to be obeyed by a chemical equation. The total mass of all elements on the reactant side will be equal to the total mass of all elements on the product side in the balanced chemical equation.

Learn more about the chemical equation, here:

brainly.com/question/28294176

#SPJ1

In the electrolysis of water,  3490 hour will it take to produce 165.0 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA.

The ideal gas law states that the pressure of gas is directly proportional to the volume and temperature of the gas.

It is expressed as

PV = nRT

where,

P = Pressure

V = Volume in liters

n = number of moles of gas

R = Ideal gas constant

T = Temperature in kelvin

Here,

P = 1.0 atm

V = 165.0 L

R = 0.0821 atm. L/mol.K (Ideal gas constant)

T = 273 K

n = ?

Now put the value in above expression, we get

PV = nRT

1.0 atm × 165.0 L = n × 0.0821 atm. L/mol.K × 273 K

165.0 atm. L = n × 22.4  atm. L/mol

[tex]n = \frac{165.0\ \text{atm. L}}{22.4\ \text{atm. L/mol}}[/tex]

n = 7.36 mol

The reaction is

2H⁺ + 2e⁻ → H₂

1 mol of electrons is produced from 96500 C

So,

[tex]96500 \frac{C}{\text{mol} \times e} \times 2e \times 7.36\ \text{mol}[/tex]

= 1,420,480 C

Convert milliampere to C/s

1mA = 0.001 C/s

113.0 mA = 113.0 × 0.001

               = 0.113 c/s

The relation between current, charge and time is expressed as:

[tex]I = \frac{Q}{t}[/tex]

where,

I = Current

Q = Charge in Coulomb

t = time

Now put the value in above formula we get

[tex]I = \frac{Q}{t}[/tex]

  [tex]= \frac{1,420,480\ C}{0.113\ C/s}[/tex]

  = 12,570,619.469 s

  = 3490 hour

Thus from the above conclusion we can say that In the electrolysis of water,  3490 hour will it take to produce 165.0 L of H2 at 1.0 atm and 273 K using an electrolytic cell through which the current is 113.0 mA.

Learn more about the Ideal Gas Law here: https://brainly.com/question/25290815

#SPJ4

A  bond issue consists of a number of bonds, usually in denominations of  $1,000 and $5,000.

The term bond refers to a sort of investment in which an individual loans  money to the government or sometimes to the government in return for an interest on the investment. This interest is paid to the individual regularly as a return on his/ her investment.

Hence a bond issue consists of a number of bonds, usually in denominations of  $1,000 and $5,000.

Learn more about bonds and securities:https://brainly.com/question/18652458

#SPJ1

Missing parts;

Bonds are securities that can be readily bought and sold. A bond issue consists of a number of bonds, usually in denominations of ______ or _____ and is sold to many different lenders.

Multiple choice question.

$100; $1,000

$1,000; $10,000

$500; $5,000

$1,000; $5,000

The free energy is always negative and the dissolution is feasible when enthalpy is negative and entropy is positive. Option A

Water is known as the universal solvent. Water is a polar substance hence it is often used to dissolve polar substances. It has a dipole and being that there is a high degree of electronegativity difference between the oxygen and the hydrogen atoms in water, it is feasible that the degree of hydrogen bonding between the two is high.

We know that dissolution is favored when there will be an increase in entropy as a result of that, that is; if more particles will appear. Now we know that ΔG = ΔH - TΔS.

Given the equation above, it then follows that the free energy is always negative and the dissolution is feasible when enthalpy is negative and entropy is positive. Option A

Learn more about enthalpy:https://brainly.com/question/3393755

#SPJ1

Answer:

OX-Y-Z

Explanation:

its the correct answer

The correct order from the most amount of motion( Kinetic energy) to the least amount of motion is Y (gas), Z (liquid), and X (ice). The correct answer is C, Y-Z-X.

In the given sequence, the states of matter with the most amount of motion (kinetic energy) to the least amount of motion are as follows:

Y - Gas (highest kinetic energy, molecules move freely and quickly in all directions)

Z - Liquid (intermediate kinetic energy, molecules have some freedom of movement but are more closely packed than in a gas)

X - Ice (lowest kinetic energy, molecules are tightly packed and have minimal movement, as it is in a solid state)

This sequence reflects the increasing freedom of movement and mobility of molecules as they transition from a solid to a liquid to a gas state.

Thus, the correct option is C.

To know more about Kinetic energy, click here:

https://brainly.com/question/999862

#SPJ5

The additional information that needed to convert empirical formula calculation into molecular formula are percentage of the elements in the compound; molar mass; and molecular mass.

The empirical formula is the chemical formula of a compound which inform the proportions or rations of the elements present in the compound but it is not represent the actual numbers or arrangement of atoms. In short, empirical formula is the smallest possible number that element present in the formula. Empiric formula can be use to determine the molecular formula calculation because it is contain an information about number of atom of each element present in the formula.

Learn more about empirical formula here

https://brainly.com/question/1603500

#SPJ4

3.00 ×10² g of HF.

A Thermochemical Equation is a balanced stoichiometric chemical equation that includes the enthalpy change, ΔH. In variable form, a thermochemical equation would look like this:

A + B → C. ΔH = (±) #

The thermochemical reaction is of two types:

Endothermic Reaction Those thermochemical reactions in which heat is absorbed. Change in enthalpy for this reaction is positive.

Exothermic Reaction Exothermic reactions are the reaction in which the heat or the energy is evolved during the reaction.

SiO2 + 4 HF(g)  →  SiF4(g) + 2 H20(l)    ΔH®rxn=-184 kJ

to learn about thermochemical equation go to - brainly.com/question/2874342

#SPJ4

Answer:

9.21 kJ is the enrgy required to vaporize 11.0 grams of ethanol.

Explanation:

Energy of vaporization can be stated as 38.6 kj/mole for ethanol.  ["It takes 38. 6 kj of energy to vaporize 1. 00 mol of ethanol"]

11.0 grams of ethanol is not 1 mole.  Calculate the moles of ethanol by dividing t=it's mass by its molar mass:

(11.0 grams)/(46.07 g/mole) = 0.2388 moles ethanol

(0.2388 moles ethanol)*(38.6 kj/mole) = 9.21 kJ is the enrgy required to vaporize 11.0 grams of ethanol.

Answer: Mg(NO₃)₂ * 6 H₂O

Explanation:

The number of mole of Ag formed from the reaction of 8.0 moles of AgNO₃ and 5.0 moles of Zn, given the chemical reaction is 8 moles

To know the number of mole of Ag formed, we'll begin by obtaining the limiting reactant. Details below:

2AgNO₃ + Zn -> 2Ag + Zn(NO₃)₂

From the balanced equation above,

2 moles of AgNO₃ reacted with 1 mole of Zn

Therefore,

8 moles of AgNO₃ will react with = (8 × 1) / 2 = 4 moles of Zn

From the above calculation, 8 moles of AgNO₃ requires only 4 moles out of 5 moles of Zn given. Thus, AgNO₃ is the limiting reactant

Finally, we shall determine the number of moles of Ag formed. This is shown below:

From the balanced equation above,

2 moles of AgNO₃ reacted to produce 2 moles of Ag

Therefore,

8 moles of AgNO₃ will also react to produce 8 moles of Ag

In conclusion, we can say that the number of mole of Ag formed is 8 moles

Learn more about number of mole:

https://brainly.com/question/23350512

https://brainly.com/question/13375719

#SPJ1

When 15.5 g of iron (Fe) is reacted with an excess of chlorine gas, it will produce approximately 44.97 g of iron(III) chloride (FeCl₃) based on the balanced equation.

To balance the equation, we need to ensure that the number of atoms of each element is equal on both sides. In the unbalanced equation:

Fe(s) + Cl₂ (g) → FeCl₃ (s)

We have one iron atom on the left side and one iron atom on the right side. So, the iron is already balanced. However, we have two chlorine atoms on the left side and three chlorine atoms on the right side. To balance the chlorine, we need to place a coefficient of 3 in front of the Cl₂ on the left side:

Fe(s) + 3Cl₂ (g) → FeCl₃ (s)

Now that the equation is balanced, we can calculate the number of grams of iron(III) chloride (FeCl₃) formed when 15.5 g of iron (Fe) reacts. From the balanced equation, we can see that the molar ratio between iron and iron(III) chloride is 1:1. Therefore, the molar mass of iron(III) chloride is relevant for this calculation.

The molar mass of Fe is approximately 55.845 g/mol, and the molar mass of FeCl₃ is approximately 162.204 g/mol (55.845 g/mol for Fe + 3 * 35.453 g/mol for Cl). We can use these molar masses to convert the mass of iron to moles and then calculate the mass of iron(III) chloride produced.

Number of moles of Fe = 15.5 g / 55.845 g/mol = 0.2776 mol

Since the molar ratio between Fe and FeCl₃ is 1:1, the number of moles of FeCl₃ produced is also 0.2776 mol.

Mass of FeCl₃ = 0.2776 mol * 162.204 g/mol = 44.97 g

Therefore, 15.5 g of iron will result in approximately 44.97 g of iron(III) chloride when reacted with an excess of chlorine gas.

For more such question on equation. visit :

https://brainly.com/question/26694427

#SPJ8

The digestive tract called gastrointestinal tract..

The digestive tract is a channel that receives food, then digests and absorbs the food nutrients through parts of the organs in the digestive system. The food that has been digested and absorbed is then expelled through the anus.

The digestive tract consists of the oral cavity, esophagus, stomach, small intestine, large intestine, rectum and anus. That is why this tract is called the gastrointestinal tract because it extends from the mouth to the anus. There are two digestive processes in the digestive tract, namely mechanical digestion and chemical digestion. Mechanical digestion is digestion that breaks down large foods into small ones through the digestive organs. While chemical digestion is the digestion of complex organic molecular materials into simple ones with the help of enzymes.

Learn more about digestive system  at:

https://brainly.com/question/10457697

#SPJ4

Based on the given scenario, the rate of increase in water pressure in atm/km is known to be 992 atm/km.

Pressure is known to be that kind of force that is known to often pushes water via pipes.

Note that Water pressure is a tool that is often used to know or identify the flow of water from any given tap. The amount of pressure at one's tap is said to be often dependent on how high the service tank or water tower is above one's home.

Therefore since 1 atm/m  = 1000 atm/km

Hence 0.992 atm/m  :

           = 0.992 x 1000

          = 992 atm/km.

Therefore, Based on the given scenario, the rate of increase in water pressure in atm/km is known to be 992 atm/km.

Learn more about water pressure  from

https://brainly.com/question/8562322

#SPJ1

Shorter service life is the limitation to battery system.

Engineers created a new type of battery that weaves two promising battery sub-fields into a single battery.

The battery utilizes both a solid-state electrolyte and an all-silicon anode, manufacturing it a silicon-all-solid-state battery. Lithium-metal, a solid-state battery that is far more well organized than lithium-ion batteries.

Shorter service life is the limitation to battery system. While a flywheel storage device has the same service life as the UPS, batteries generally need to be replaced many times over the same period of time.

New battery technology breakthrough is event rapidly. Advanced new batteries are directly being developed, with some already on the market. The latest generation of grid-scale repository batteries have a higher capacity, a higher efficiency, and are longer lasting life.

So we can conclude that The recent strong progress in the evolution of lithium-ion batteries.

Learn more about batteries here: https://brainly.com/question/26466203

#SPJ1

The hydroxide ion concentration in the solution is 1.788 × 10⁻¹¹ M. The amount of any ion present in a solution is typically represented in moles per liter as ionic concentration.

An indicator of an environment's ion concentration is an environment's ionic strength. Ions are formed from ionic chemicals when they dissolve in water. Significant aspects like the dissociation constant or the solubility of various salts will be impacted by the total concentration of electrolytes in the solution. Normal brain processes depend on the maintenance of ion concentration homeostasis, and variations in this state can cause a variety of pathological disorders, including seizures.

The equation to calculate pOH of the solution is

pOH = - log[OH⁻]

Given:

pOH = 10.75

Hence, 10.75 = - log[OH⁻]

[OH⁻] = [tex]10^{-10.75}[/tex] = 1.788 × 10⁻¹¹ M

To learn more about ionic concentration, visit:

https://brainly.com/question/30301871

#SPJ1

The complete question is:

The pOH of a solution is 10.75. What is the concentration of OH ions in the solution?

Use [OH-10 POH

3.162 x 10-108 M

1.778 x 10-11 M

1.075 x 102 M

5.623 x 1010 M

Answer:

2.04 x 10⁻⁶ moles H₂O

Explanation:

To find the moles H₂O, you need to multiply the given value by Avogadro's Number. This number is a ratio between molecules and moles, thus granting you the way to convert between both units. It is important to arrange the ratio in a way that allows for the cancellation of units. The final answer should have 3 sig figs to match the sig figs of the given value (1.23 x 10¹⁸ molecules).

Avogadro's Number:

6.022 x 10²³ molecules = 1 mole

1.23 x 10¹⁸ molecules H₂O                     1 mole
---------------------------------------  x  -------------------------------------  =  
                                                    6.022 x 10²³ molecules

=  2.04 x 10⁻⁶ moles H₂O

The difference between those two is there is  a mol or mass ratios of the element in the composition and moll or mass ratio of compounds in the reaction at balanced equations.

Stoichiometry is an event of chemistry that happen using relationships between products and/or reactants in a certain chemical reaction to find out desired quantitative data. The word of stoichiometry based on Greek language, in Greek, "stoikhein" has a meaning "element" and "μέτρον" read as "metron" means "measure", so, based on its word definition, stoichiometry is a quantify of element.

Learn more about stoichiometry here

https://brainly.com/question/16060223

#SPJ4

It is true that brittleness is a physical property that differs from one kind of material to another.

Physical qualities of a substance are those that can be seen without changing the substance's identity.

If a material splits under stress with low elastic deformation and little to no substantial plastic deformation, it is considered brittle.

Brittleness is a physical property as it alters the shape of the substance but not the identity of substance.

For example - the brittleness of chalk is different than the brittleness of glass. Thus we can say that the brittleness of chalk's material is different than the  brittleness of glass's material.

Learn more about brittleness -

https://brainly.com/question/21999939

#SPJ4

Answer:

Carbon:  14

Oxygen: 16

Nitrogen: 15

Sulpher: 16

Based on the equation of the reaction;

a) The oxidation states of each of the atoms in the compounds are given below:

(b) The atom that gets oxidized is Pb and the atom that gets reduced is Pb in PbO₂

(c) The reactant that is the oxidizing agent is PbO₂ and the reactant that is the reducing agent is Pb.

An oxidizing agent is a substance that causes oxidation by accepting electrons from another substance in a redox reaction whereas, a reducing agent is a substance that causes reduction by losing electrons to another substance in a redox reaction,

In redox reactions, oxidizing agents are reduced while the reducing agents are oxidized.

A gain or loss of electrons results in a change in the oxidation states of elements.

Learn more about oxidizing and reducing agents at: https://brainly.com/question/18370994

#SPJ1

Answer:

The net force is zero

Explanation:

Newton's Third law states that every action/ force has an equal but opposite  reaction, if the car pushing on the ground, the ground is pushing on the car.

The negative radicals will be  [tex]Cl^-[/tex], [tex]HCO^-[/tex], [tex]CO_3^2^-[/tex], and [tex]OH^-[/tex] respectively.

They are the species that are negatively charged in ion forms.

[tex]NaCl --- > Na^+ + Cl^-[/tex]

[tex]NaHCO --- > Na^+ + HCO^-[/tex]

[tex]Na_2CO_3 --- > 2Na^+ + CO_3^2^-[/tex]

[tex]Ca(OH)_2 -- > Ca^2^+ + 2OH^-[/tex]

Thus, the negative radicals in each of the chemicals are [tex]Cl^-[/tex], [tex]HCO^-[/tex], [tex]CO_3^2^-[/tex], and [tex]OH^-[/tex] respectively.

More on negative radicals can be found here: https://brainly.com/question/2112149

#SPJ1

The negative radicals as as follows;

The negative radicals are the radicals that are negatively charged. Every ionic compound is composed of positively and negatively charged ions.

Let us now identify the negative radicals in the following ionic compounds;

Learn more about negative ions:https://brainly.com/question/269828

#SPJ1

Answer:

Haworth projection (14.3)

please give me brainliest

The five elements of chemical change include colour change, precipitate or gas formation, odour change, temperature change, and gas or precipitate formation.

When choosing an indicator for acid-base titrations, pick one whose pH range is compatible with the reaction's pH change. As an illustration, the pH quickly rises from 3 to 11 when a strong acid and base are titrated.

Chemical indicator: Any substance that can be used to detect the presence or absence of a chemical species at a threshold concentration in a solution, such as an acid or an alkali, usually by changing colour. Methyl yellow is a good illustration of this.

To know more about chemical process  visit:-

https://brainly.com/question/21182404

#SPJ1

Answer:

0.248 moles of aluminum (Al) are reacted to produce 23.7 grams of copper.