list 10 uses of metals​

Answers

Answer 1

Answer:

Shiny metals such as copper, silver, and gold are often used for decorative arts, jewelry, and coins.

Strong metals such as iron and metal alloys such as stainless steel are used to build structures, ships, and vehicles including cars, trains, and trucks.

Some metals have specific qualities that dictate their use. For example, copper is a good choice for wiring because it is particularly good at conducting electricity. Tungsten is used for the filaments of light bulbs because it glows white-hot without melting.

Nonmetals are plentiful and useful. These are among the most commonly used:

Oxygen, a gas, is absolutely essential to human life. Not only do we breathe it and use it for medical purposes, but we also use it as an important element in combustion.

Sulfur is valued for its medical properties and as an important ingredient in many chemical solutions. Sulfuric acid is an important tool for industry, used in batteries and manufacturing.

Chlorine is a powerful disinfectant. It is used to purify water for drinking and fill swimming pools.

Explanation:


Related Questions

A 15.2 kg mass has a gravitational potential energy of -342 J. How high from the ground is it? Group of answer choices GPE cannot be negative 2.3 m 22.5 m 530 m

Answers

A. The height above the ground reached by the mass is 2.3 m.

Height traveled by the mass

P.E = mgh

where;

m is mass h is height reached by the objectg is acceleration due to gravity

h = P.E/mg

h = (342)/(15.2 x 9.8)

h = 2.3 m

Thus, the height above the ground reached by the mass is 2.3 m.

Learn more about gravitational potential energy here: https://brainly.com/question/1242059

#SPJ1

question is down below

Answers

The vertical components of velocity is 10.35 m/s and the horizontal component of velocity is 38.6 m/s

What are the components of velocity?

We know that velocity is a vector quantity, a vector often can be resolved into its components. The vertical components is V sinθ while the horizontal component is vcosθ.

Hence;

Vertical component = 40 m/s sin 15 degrees = 10.35 m/s

Horizontal component = 40 cos 15 degrees = 38.6 m/s

Learn more about components of velocity:https://brainly.com/question/14478315

#SPJ1

A mountain skier has begun descending the 30o slope. if the coefficient of kinetic friction is 0.10, what is her acceleration?

Answers

The acceleration of the body is found to be -4.05 m/s^2

What is the acceleration?

We define the acceleration as the rate of change of the velocity with time. Hence, we can write that;

a = (μcosθ - sinθ)g

a = acceleration

μ = coefficient of kinetic friction

θ = angle of inclination

g = acceleration due to gravity

Thus;

a = (0.10cos 30 - sin 30) 9.8

a = -4.05 m/s^2

Learn more about acceleration:https://brainly.com/question/12550364

#SPJ1


What will be the pressure exerted by the object if 5,000 N of force
area of 200 cm²?

Answers

Answer:

[tex]250000 \frac{n}{m {}^{2} } [/tex]

Explanation:

pressure is the force applied perpendicular to the surface area of an object per unit area.

for the question,

Force (F) = 5000N

[tex]Area = 200cm {}^{2} = 0.02m {}^{2} \\ Pressure = \frac{force}{area} \\ Pressure = \frac{5000}{0.02} \\ Pressure = 250000 \frac{n}{m {}^{2} } [/tex]

A kettle transfers 6,000j of energy electrically. 1,500j of this is wasted. what is the efficiency of this kettle?

Answers

Answer:75 percent

Explanation:so in order tro fin d thge efficiency i used the forumla ,efficency=useful output energy/input energyx100%,in order to use this formula i needed the output,which i found by subtracting the input energy with wasted energy,that gave me the output,and after founding the output,i put that into the formula,

output energy=input energy - wasted energy

output energy=6000j-1500j

output energy=4500

put that into the formula

efficiency =output energy/input enrgy x100%

efficiency=4500/6000 multiplied by 100%

efficiency=0.75x100%

efficiency=75%

Your best friend weighs 81.5 kg and is a rugby player. In one of his games, he slides to a stop in a phenomenal manner. The coefficient of kinetic friction between the player and the ground is 0.70. His speed at the start of the slide is 8.23 m/s. I a) Calculate his acceleration during the slide. b) How long (in time) does he slide until he stops?​

Answers

A. The acceleration during the slide is 6.86 m/s²

B. The time taken to slide until he stops is 1.2 s

How to determine the force of frictionMass (m) = 81.5 KgCoefficient of friction (μ) = 0.7Acceleration due to gravity (g) = 9.8 m/s²Normal reaction (N) = mg = 81.5 × 9.8 = 798.7 NFrictional force (F) =?

F = μN

F = 0.7 × 798.7

F = 559.09 N

A. How to determine the accelerationMass (m) = 81.5 KgFrictional force (F) = 559.09 NAcceleration (a) =?

a = F / m

a = 559.09 / 81.5

a = 6.86 m/

B. How to determine the time Initial velocity (u) = 8.23 m/sFinal velocity (v) = 0 m/sDecceleration (a) = -6.86 m/s²Time (t) =?

a = (v – u) / t

t = (v – u) / a

t = (0 – 8.23) / -6.86

t = 1.2 s

Learn more about acceleration:

https://brainly.com/question/491732

#SPJ1

How much power will be required to force a current of 4.13 amps to flow through a conductor whose resistance is 113 ohms? Use two decimals for your answer. Round your answer to two decimals.

Answers

The power required to force the current of 4.13 A to flow through the conductor is 1927.43 watts

What is power?

This is defined as the rate in which energy is consumed. Electrical power is expressed mathematically as:

Power (P) = square current (I²)× resistancet (R)

P = I²R

How to determine the powerCurrent (I) = 4.13 AResistance (R) = 113 ohmsPower (P) =?

P = I²R

P = 4.13² × 113

P = 1927.43 watts

Thus, the power required is 1927.43 watts

Learn more about electrical power:

https://brainly.com/question/64224

#SPJ1

The image above shows a crash test dummie's head traveling at -1.005 m/s while striking a headrest from a car traveling 4.524 m/s with a mass of 2005.6 kg. If the crash test dummie's head head bounces off the headrest with a 9.965 m/s and the car continues traveling at 4.487 m/s, calculate the mass of the crash test dummie's head?

Answer:

Answers

From the calculation, the mass of the dummies head is 1647.44 Kg

What is the mass of the crash test dummies head?

We know that the momentum after collision is equal to the momentum before collision.

Mass of the headrest = 2005.6 kg

Initial velocity of the head rest = 4.524 m/s

Final velocity of the head rest =  4.487 m/s

Mass of the dummy = m

Initial velocity of the dummy = -1.005 m/s

Final velocity of the dummy = 9.965 m/s

Then;

(m *  -1.005) + (2005.6 * 4.524 ) = (2005.6 *   4.487) + (m * 9.965)

-1.005m + 9073.33 = 8999.13 + 9.965m

9073.33 - 8999.13  = 9.965m + 1.005m

18072.46 = 10.97m

m = 18072.46/ 10.97

m = 1647.44 Kg

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

Black smokers are hot volcanic vents that emit smoke deep in the ocean floor. Many of them teem with exotic creatures, and some biologists think that life on earth may have begun around such vents. The vents range in depth from about 1500 m to 3200 m below the surface. What is the gauge pressure at a 2452-m deep vent, assuming that the density of water does not vary

Answers

If the density of water does not vary and the vents range in depth from about 1500 m to 3200 m below the surface, then the gauge pressure at a 2452-m deep vent is 224.268 atm.

Calculation:

Step-1:

It is given that the vents range in depth from about 1500 m to 3200 m below the surface. If we are assuming that the density of water does not vary. Then it is required to calculate the gauge pressure at a 2452-m deep vent.

The gauge pressure at a particular depth of ocean water is calculated as:

[tex]$$P=\rho g h$$[/tex]

Here [tex]\rho[/tex] is the density of water, P is the required pressure, h is the depth of water, and g is the gravitational acceleration.

Step-2:

Now we are substituting the values to calculate the pressure at the depth of 2452-m.

[tex]$$\\\begin{aligned}\\P&=\rho gh\\&=1030 (\text{ kg/m}^3)\times 9.8 (\text{ m/s}^2)\times 2452 \text{ m}\\&=24.75\times 10^6 \text{ Pa}\times\frac{1 \text{ atm}}{10.1325 \times10^4 \text{ Pa}}\\&=224.268 \text{ atm}\\\end{aligned}\\$$[/tex]

Learn more about gauge pressure here,

https://brainly.com/question/14012416

#SPJ4

in the photoelectric effect a photon with an energy of 5.3 * 10^-19 J strikes an electron in a metal

Answers

The velocity of the photo electron is 6.11 × 105 ms

Given :

Supplied energy, Es = 5.3 x 10-19 J

Minimum energy of the electron to escape from the metal, E. = 3.6 x 10-19 J

To Find :

Velocity of photoelectron

Solution : The energy supplied by the photon is equal to the sum of minimum escape energy and the kinetic energy of the escaping electron. So

5.3 × 10^-19 J = 3.6 × 10^-19 J + K

K = 5.3 x 10^-19 - 3.6 x 10^-19

K = 1.7 × 10^-19 J

The formula of kinetic energy is given by:

K = 1/2 mv^2

v = √2K/m

= √2 x 1.7 x 10^-19

√ 9.1 x 10^-31

v = 6.11 x 10^5 m/s

So, the velocity of the photo electron is 6.11 x 10^5 m/s

Learn more about Velocity here:

https://brainly.com/question/15585270

#SPJ4

What force is large enough to change the direction of a planet?
A. Gravity
B. Friction
C.Tension
D. Air Resistance

Answers

Answer:

Gravity

Explanation:

The more massive the object is, the higher the gravity

Hence, a massive star, like our sun, has enough gravity to pull on planets and keeping them in orbit

When operating an aircraft at cabin pressure altitudes above 12,500 feet msl up to and including 14,000 feet msl, supplemental oxygen shall be used during?

Answers

Supplemental oxygen shall be used in that flight time in excess of 30 minutes at those altitudes.

Most plane cabins are pressurized to 8,000 feet above sea level, an altitude that lowers the amount of oxygen inside the blood by approximately 4 percentage points, researchers say.

The higher the altitude, the less oxygen there is in the air and the lower the overall air pressure is. If flights were not pressurized, passengers could be prone to various physiological illnesses. Because of this, federal policies require that all commercial flights over 8,000 feet be pressurized.

The flight crew must use supplemental oxygen for the entire duration of flight operations above a cabin pressure altitude of 14,000 feet MSL.

learn more about air pressure here https://brainly.com/question/12870338

#SPJ4

Two 5000-kg passenger cars roll without friction (one at 1 m/s, the other at 2 m/s) toward one another on a level track. They collide, couple, and roll away together with a combined momentum of

Answers

The combined momentum of the passengers is 5000 kgm/s.

Combined momentum of the passenger

The combined momentum of the passengers is calculated as follows;

P = mv1 + mv2

where;

m is mass of the passengersv1 is velocity of the first passengerv2 is velocity of the second passenger

P = m(v1 + v2)

P = 5000(-1 + 2)

P = 5000 kgm/s

Thus, the combined momentum of the passengers is 5000 kgm/s.

Learn more about momentum here: https://brainly.com/question/7538238

#SPJ1

A 10 kg box initially at rest is pulled with a 50 N horizontal force for 4 m across a level surface. The force of friction acting on the box is a constant 20 N. How much work is done by the 50 N force?

Answers

The work is done by the 50 N force is 200 J.

Work done by the 50 N force

Work done = Fd

where;

F is Force applied d is the displacement of the object

Work done = 50 N x 4 m = 200 J

Thus, the work is done by the 50 N force is 200 J.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

A velocity-time graph is shown below:

Answers

The average acceleration in the first 10 seconds of the journey is 2 m/s²; option B.

What is acceleration?

Acceleration is the rate of change of velocity with time.

Acceleration = change in velocity/time

From the graph;

Acceleration in first  seconds = 20 - 0/5 = 4 m/s²

Acceleration in second 5 seconds = 0

Average acceleration = 4 + 0/2

Average acceleration = 2 m/s²

In conclusion, average acceleration is the average of the final and initial acceleration.

Learn more about acceleration at: https://brainly.com/question/14344386

#SPJ1

1. A 500 g piece of silver at 250°C is submerged in 1000 g of water at 5°C to be cooled. Determine the
final temperature of the silver and water. Given Cwater = 4180 J/kg°C and Csilver = 240 J/kg°C.

Answers

Taking into account the definition of calorimetry,  the final temperature of the silver and water is 11.84 °C.

Calorimetry

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).

So, the equation that allows to calculate heat exchanges is:

Q = c× m× ΔT

where:

Q is the heat exchanged by a body of mass m. c is the specific heat substance. ΔT is the temperature variation.

Final temperature of the silver and water

In this case, you know:

For silver:Mass of silver= 500 g= 0.5 kg (being 1000 g= 1 kg)Initial temperature of silver= 250 °CFinal temperature of silver= ?Specific heat of silver= 240 [tex]\frac{J}{kgC}[/tex] For water:Mass of water = 1000 g= 1 kgInitial temperature of water= 5 ºCFinal temperature of water= ?Specific heat of water = 4180 [tex]\frac{J}{kgC}[/tex]

Replacing in the expression to calculate heat exchanges:

For silver: Qsilver= 240 [tex]\frac{J}{kgC}[/tex]× 0.5 kg× (Final temperature of silver - 250 C)

For water: Qwater= 4180 [tex]\frac{J}{kgC}[/tex] × 1 kg× (Final temperature of water - 5 C)

If two isolated bodies or systems exchange energy in the form of heat, the quantity received by one of them is equal to the quantity transferred by the other body. That is, the total energy exchanged remains constant, it is conserved.

Then, the heat that the silver gives up will be equal to the heat that the water receives. Therefore:

- Qsilver = + Qwater

And the final temperature of the silver is equal to the temperature of the water (Final temperature of silver= Final temperature of water= Final temperature). Then:

- 240 [tex]\frac{J}{kgC}[/tex]× 0.5 kg× (Final temperature - 250 C)= 4180 [tex]\frac{J}{kgC}[/tex] × 1 kg× (Final temperature - 5 C)

Solving:

- 120 [tex]\frac{J}{C}[/tex]× (Final temperature - 250 C)= 4180 [tex]\frac{J}{C}[/tex]× (Final temperature - 5 C)

120 [tex]\frac{J}{C}[/tex]× (250 C - Final temperature) = 4180 [tex]\frac{J}{C}[/tex]× (Final temperature - 5 C)

120 [tex]\frac{J}{C}[/tex]×250 C - 120 [tex]\frac{J}{C}[/tex]×Final temperature = 4180 [tex]\frac{J}{C}[/tex]×Final temperature - 4180 [tex]\frac{J}{C}[/tex]×5 C

30,000 J - 120 [tex]\frac{J}{C}[/tex]×Final temperature = 4180 [tex]\frac{J}{C}[/tex]×Final temperature - 20,900 J

50,900 J= 4300 [tex]\frac{J}{C}[/tex]×Final temperature

50,900 J÷ 4300 [tex]\frac{J}{C}[/tex]= Final temperature

11.84 °C= Final temperature

Finally,  the final temperature of the silver and water is 11.84 °C.

Learn more about calorimetry:

brainly.com/question/11586486

brainly.com/question/24724338

brainly.com/question/14057615

brainly.com/question/24988785

brainly.com/question/21315372

brainly.com/question/13959344

brainly.com/question/14309811

brainly.com/question/23578297

#SPJ1

Which type of galaxy is likely to contain only o-spectral type stars?

Answers

The answer is Spiral

John is talking to his friend about painting a fence. He states that if he uses a roller brush he will cover the fence faster than if he uses a bristle brush. This is an example of a a. Law b. Belief c. Theory d. Hypothesis​

Answers

Answer:

b

Explanation:

As the electric potential near the ground increases during a thunderstorm, a positive charge current can move up pointed objects, such as masts of ships, producing a luminous halo or glow known as ____.

Answers

Answer:

St. Elmo's Fire - well known to old time sailors

A proton exits the cyclotron 1. 0 ms after starting its spiral trajectory in the center of the cyclotron. How many orbits does the proton complete during this 1. 0 ms ?.

Answers

The diameter of the largest orbit just before the protons exit the cyclotron is 39 cm.

The number of orbits completed by the proton during this 1.0 ms is 14000 revolutions.

The kinetic energy for the protons can be computed by using the formula:

   K.E = 1/2mv²

mv² = 2 K.E

v = sqrt( 2*KE / M)

the kinetic energy of the medical isotopes = 6.5 MeV

substituting the values,

v = sqrt( 2* 6.5* 1.6* 10^-13 / 1.67* 10^-27 )

v = 3.53 × 10⁷ m/s

The radius of the orbit can be estimated by using the formula:

mv² / R = qvB

r = q*v / mv²

r = ( 1.67* 10^-27 * 3.53 × 10⁷ ) / ( 1.9* 1.6* 10^-19 )

r = 0.19415 m

Since diameter (D) = 2r,

D= 2(0.19415  m)

D= 0.39 m

D≅ 39 cm

The time period to complete a revolution around the spiral trajectory is:

T = 2πr / v

T = 2*3.14* 0.1941 / 3.53*10^7

T = 0.7 × 10⁻⁷ s

Finally, the number of orbits that the proton does to complete the revolution in 1 ms is:

n = t / T

n = 10^-3 / (0.7*10^-7)

n = 14285.71

n ≅ 14000 revolutions

Learn more about cyclotron here:

https://brainly.com/question/26832152

#SPJ4

Your question is incomplete, but most probably full question was:

A medical cyclotron used in the production of medical isotopes accelerates protons to 6.5 MeV. The magnetic field in the cyclotron is 1.9 T.

(a) What is the diameter of the largest orbit, just before the protons exit the cyclotron? Express your answer with the appropriate units. d = 57 cm Previous

(b) A proton exits the cyclotron 1.0 ms after starting its spiral trajectory in the center of the cyclotron. How many orbits does the proton complete during this 1.0 ms?

A fireworks shell is accelerated from rest to a velocity of 60.0 m/s over a distance of 0.200 m. How long did the acceleration last

Answers

The acceleration lasted for 0.007s.

To find the answer, we need to know about the Newton's equation of motion.

What's the Newton's equation of motion that relates initial velocity, final velocity, acceleration, time and distance?

Newton's equations are

V²-U²= 2aSV²-U²= 2aSV= U+at

V= final velocity, U= initial velocity, a= acceleration, t= time and S = distance

What's the acceleration, if the fireshell is accelerated from rest to a velocity of 60.0 m/s over a distance of 0.200 m?Here, U= 0m/s, V= 60.0 m/s, S= 0.200 m

60²-0= 2a×0.2= 0.4a

a= 3600/0.4= 9000m/s²What's the time taken by the fireshell to achieve 60m/s with 9000m/s² acceleration from rest?Here, U= 0m/s, V = 60.0 m/s, a= 9000m/s²60= 0+9000tt= 60/9000= 0.007 s

Thus, we can conclude that the acceleration of the fireshell lasted for 0.007s.

Learn more about the acceleration here:

brainly.com/question/460763

#SPJ4

The pressure due to the atmosphere is very large, why are we not crushed?

Answers

Answer:

It is because of the blood pressure balances with our atmospheric pressure

An engine has an input of heat energy of 10,750 J and does 2,420 J of work. Which of the following is the heat loss?
Group of answer choices

a. 13,200 J

b. 8,330 J

c. 4.44 J

c. 0.225 J

Answers

B. The heat loss by the heat engine is 8,330 J.

Heat loss by the heat engine

The heat loss by the heat engine is calculated as follows;

H = E - W

where;

H is heat lossE is input energyW is work done

H = 10,750 J - 2,420 J

H = 8,330 J

Thus, the heat loss by the heat engine is 8,330 J.

Learn more about heat loss here: https://brainly.com/question/14702484

#SPJ1

what is kinematics ?
explain ~

[tex] \\ \\ [/tex]
tysm! :)​

Answers

Answer:

Kinematics is the study of the motion of mechanical points, bodies and systems without consideration of their associated physical properties and the forces acting on them. The study is often referred to as the geometry of motion, and it models these motions mathematically using algebra

Answer:

the branch of mechanics concerned with the motion of objects without reference to the forces which cause the motion is kinematics

How is a rainbow formed?

Answers

Answer:

easy

Explanation:

it when the sunlight hits a rain droplets ,some of the light is reflected .The electromagnetic spectrum is made of light with many different wavelengths and each is reflected at a different angle . Thus spectrum is seperated producing a rainbow

a pulley is assumed massless and frictionless and rotates freely about its axle. the blocks have masses m1=40g and a block m2= 20g, and block m1 is pulled to the right by a horizontal force magnitude f=0.03n. find the magnitude of acceleration of a block m2 and the tension in the cord.....?

Answers

The magnitude of acceleration of a block m₂ is 0.05 m/s² and the tension in the cord is 0.01 N.

Given:

mass of block 1, m₁ = 40 gm = 40×10⁻³ kg

mass of block 2, m₂ = 20 gm = 20×10⁻³ kg

Applied force, F = 0.03 N

Calculation:

Consider the free-body diagram of the system as shown below. Using Newton's second law of motion we get:

F = ma

where F is the applied force

            m is the total mass of the system

            a is the acceleration of block 2 (as it is pulled by horizontal force)

From the above equation we get:

0.03 N = (m₁+m₂) a

⇒ a = (0.03 N) / (m₁+m₂)

⇒ a = (0.03 N) / (40×10⁻³ kg + 20×10⁻³ kg)

⇒ a = 0.5 m/s²

Now, from the free-body diagram of block 2 as shown in figure 3, we get:

Balancing the forces along the horizontal:

∑Fₓ = 0

∴ T = m₂ a

where T is tension in the string

           a is the acceleration of block 2

Applying values in the above equation we get:

T = (20×10⁻³ kg) × (0.5 m/s²)

  = 0.01 N

Therefore, the acceleration of block 2 due to the applied horizontal force is 0.5 m/s² and the tension in the cord is 0.01 N.

Learn more about tension here:

https://brainly.com/question/13397436

#SPJ4

20. Q: How long will it take for an apple falling from a 29.4m-tall tree to hit the ground?

A: 1.56 s
B: 2.04 s
C: 2.45 s
D: 3.72 s

Answers

Answer:

2.45s

Explanation:

is explanation needed too?

Based on illustrations of magnetic field lines, where could an object be placed so it would not experience a magnetic force

Answers

Halfway between the like poles of two magnets, because the field lines bend away and do not enter this area.

How does a magnetic field diagram show where the field is strongest?

The magnetic field lines do not ever cross. The lines include arrowheads to indicate the direction of the force exerted by a magnetic north pole. The closer the lines are to the poles, the stronger the magnetic field (thus the magnetic field from a bar magnet is highest closest to the poles).

Where is magnetic field the strongest and weakest on a magnet?

The bar magnet's magnetic field is strongest at its core and weakest between its two poles. The magnetic field lines are densest immediately outside the bar magnet and least dense in the core.

Which two locations on the magnet would have the greatest attractive forces?

Inside the magnet itself, the field lines run from the south pole to the north pole. The magnetic field is strongest in areas of greatest density of magnetic field lines, or areas of the greatest magnetic flux density.

Learn more about magnetic field

brainly.com/question/11514007

#SPJ4

What is the strength of the electric field between two parallel conducting plates separated by 1.00 cm and having a potential difference (voltage) between them of 1.50×10^4v ?

Answers

What is the strength of the electric field between two parallel conducting plates separated by 1.00 cm and having a potential difference (voltage) between them of 1.50×10^4v ?

Earth orbits the sun at an average circular radius of about 149.60 million kilometers every 365.26 Earth days.
a) Determine the Earth’s average orbital speed expressed in kilometers per hours.
b) Based on the information given in this question, calculate the approximate mass of the Sun.

Answers

The Earth’s average orbital speed expressed in kilometers per hours is 107225.5 Km/hr and the mass of the sun is 2.58 x [tex]10^{24}[/tex] Kg

Relationship between Linear and angular speed

Linear speed is the product of angular speed and the maximum displacement of the particle. That is,

V = Wr

Where

V = Linear speedW = Angular speedr = Radius

Given that the earth orbits the sun at an average circular radius of about 149.60 million kilometers every 365.26 Earth days.

a) To determine the Earth’s average orbital speed, we will make use of the below formula to calculate angular speed

W = 2[tex]\pi[/tex]/T

W = (2 x 3.143) / (365.26 x 24)

W = 6.283 / 876624

W = 7.2 x [tex]10^{-4}[/tex] Rad/hr

The Earth’s average orbital speed V = Wr

V = 7.2 x  [tex]10^{-4}[/tex] x 149.6 x [tex]10^{6}[/tex]

V = 107225.5 kilometers per hours.

b) Based on the information given in this question, to calculate the approximate mass of the Sun, we will use Kepler's 3rd law

M = (4[tex]\pi ^{2}[/tex][tex]r^{3}[/tex]) / G[tex]T^{2}[/tex]

M = (4 x 9.8696 x 3.35 x [tex]10^{24}[/tex]) / (6.67 x [tex]10^{-11}[/tex] x 7.68 x [tex]10^{11}[/tex])

M = 1.32 x [tex]10^{26}[/tex] / 51.226

M = 2.58 x [tex]10^{24}[/tex] Kg

Therefore, the Earth’s average orbital speed expressed in kilometers per hours is 107225.5 Km/hr and the mass of the sun is 2.58 x [tex]10^{24}[/tex] Kg

Learn more about Orbital Speed here: https://brainly.com/question/22247460

#SPJ1

Other Questions
find the equation of the straight line with the following gradient point c) 5, (-1,-3) Upon seeing that his father is in trouble, Bruno seeks the assistance of ________ Explain how cellular transport is used to maintain homeostasis is one of the following ways: [A]- reabsorption of water in the nephron- absorption of water by roots- reabsorption of nutrients in the nephron- release and reuptake of neurotransmitters by a neuron The data below show the hourly wages earned by six employees. The second column shows the number of years of work experience for each employee. The third column is a binary variable indicating whether or not the employee has completed a training program. For the following questions, you may check your work using a calculator but must show how you set up the expression you are using (i.e. show your work). wage experience training 8 1 0 20 10 0 10 2 0 12 4 0 16 4 1 14 6 1 a) What are the mean, variance, and standard deviation of wages?b) What is the mean, variance, and standard deviation of experience? c) Draw a scatter plot with experience on the horizontal axis and wages on the vertical axis. Draw a straight line that best fits the data points. Based on this line, what is the approximate wage of someone with 0 years of experience? d) What is the covariance of wages and experience? Is this consistent with the line you drew in part c)? Explain. e) What is the correlation of wages and experience? Read the excerpt from paragraph 5 of "How Theseus Lifted the Stone."And Theseus went into the thicket, and stood over the stone, and tugged at it; and it moved. Then his spirit swelled within him, and he said, 'If I break my heart in my body, it shall up.' And he tugged at it once more, and lifted it, and rolled it over with a shout.Which word reflects the same connotative meaning as the word swelled in the sentence?A. expandedB. strengthenedC. inflatedD. developed Neville Brody has viewed the magazine as a dimensional object existing in time and space, and he has experimented with the continuity of design from one issue to the next. His contents page logo for ________ , for example, deconstructed from letters to abstract glyphs over several issues Identify elements of article ii of the code of conduct If a cat normally has 38 chromosomes in its somatic (body) cells, how many chromosomes will be in its gametes? a. 76 b. none of these c. 19 d. 38 Write a balanced chemical equation for the reaction of solid vanadium(V) oxide with hydrogen gas to form solid vanadium(III) oxide and liquid water. Read the passage from "The Beginnings of the Maasai.These cattle are sacred, because they are actually a divine gift from the sky god, Enkai. Our tribe makes a living by caring for the cattle, feeding them, and protecting them.What is the purpose of this passage?to explain the supernatural being Enkaito explain where the tribe comes fromto explain why the culture honors cattleto explain how Enkai cares for the cattle The starting point for preparing the operating activities section using the indirect method is ______. Multiple choice question. current liabilities current assets ending cash balance net income Federalism is an outcome of a. Centre state relationsb. Centre state relations based on power distributionc. Centre state powers divided constitutionallyd. Centre state power adjustmentsDevelopment cannot be defined as a term with single objective a. Development has many meanings and cannot be defined as one termb. Development is not a single goal.c. Development is a mix of goals and hence is not a achievement of single goald. Development has various meanings Requiring a _________ in order to register to vote is an example of a recent tactic states use that disenfranchises certain groups of potential voters An international retail food company coordinates its consistent strategic marketing message for a new sandwich through marketing tools such as sales promotions, digital marketing, advertising, and public relations campaigns. What impact could the coordination of that message have on the companys target market?. What types of issues should be agreed upon at the first level supervisor level and which ones do you think need to be elevated? division of 3 fraction (2/5 3/8 ) -3/5 A person cannot drink too much water; the kidneys and sweat glands make water excretion quick and efficient, protecting the body from overhydration. 36. Intelligence efforts should focus on the group's:A. Membership.C. Stated and unstated goals.B. Resource base.D. All of the above What are some reasons that the narr values might differ somewhat from actual climate records? The UNESCO is involved in the preservation of the _______ of mankind