By not allowing programmers to bypass security during development, the organization is attempting to prevent the vulnerability of "insecure coding practices".
Insecure coding practices can lead to vulnerabilities such as buffer overflow, SQL injection, cross-site scripting (XSS), and other types of attacks that can be exploited by attackers. By enforcing security measures during the development process, organizations can reduce the likelihood of such vulnerabilities being introduced into their systems and applications, and can ultimately reduce the risk of successful cyber attacks.
You can learn more about cyber attacks at
https://brainly.com/question/30093349
#SPJ11
What information is used by TCP to reassemble and reorder received segments?a. port numbersb. sequence numbersc. acknowledgment numbersd. fragment numbers
Answer:
Sequence numbers is the right answer.
The Transmission Control Protocol (TCP) uses sequence numbers to put back together and change the order of the segments it has received. When a sender sends data over a TCP connection, it breaks the data up into smaller pieces and gives each piece a sequence number. Then, the receiver uses these sequence numbers to put the segments back in the right order and put the data back together.
TCP uses port numbers (choice a) to figure out which application is sending or receiving the data. But they are not used to put the segments back together or in a different order.
TCP uses acknowledgement numbers (choice c) to make sure that data has been successfully sent and received. They are not used to put the segments back together or change their order.
In IP (Internet Protocol), fragment numbers (choice d) are used to break up large packets into smaller pieces that can be sent over a network. TCP, on the other hand, works at a higher level of the networking stack and doesn't care about fragment numbers.
TCP uses sequence numbers to reassemble and reorder received segments. Port numbers, acknowledgment numbers, and fragment numbers are used in TCP, but not specifically for the reassembly and ordering of segments.
Explanation:The Transmission Control Protocol (TCP) uses sequence numbers to reassemble and reorder received segments. When a TCP segment is transmitted, it is numbered with a sequence number, which the receiving system uses to reassemble the data stream in the correct order. Even if the segments arrive out of order, the TCP stack on the receiving end can use these sequence numbers to put them back together correctly.
Port, acknowledgment, and fragment numbers are used in TCP, but not specifically for the reassembly and ordering of segments. Port numbers are utilized for multiplexing and demultiplexing data between the sender and receiver. Acknowledgment numbers are used to confirm the receipt of data, and fragment numbers are not a concept of TCP at all, but rather, they are used in the IP (Internet Protocol) layer when segments are too large and need to be fragmented for transport.
Learn more about TCP Sequence Numbers here:https://brainly.com/question/31634265
A(n) ____ works like a burglar alarm in that it detects a violation (some system activities analogous to an opened or broken window) and activates an alarm.SIS, IDS, ITS, IIS,
An IDS functions similarly to a burglar alarm in that it recognizes a violation (certain system activity comparable to an opening or damaged window) and sounds an alarm.
What are IDS functions?An intrusion detection system (IDS) is a monitoring system that spots unusual activity and sends out alarms when it does. A security operations center (SOC) analyst or incident responder can look into the problem and take the necessary steps to eliminate the threat based on these notifications.An IDS is made to only send out alerts about potential incidents, allowing a security operations center (SOC) analyst to look into the situation and decide whether any action is necessary. An IPS, on the other hand, acts on its own to stop the attempted incursion or otherwise address the issue.An IDS consists of four basic parts: an IDS sensor or agent, a management server, a database server, and an IDS console.To learn more about IDS functions, refer to:
https://brainly.com/question/26961820
in continuous data protection technology, which factor determines how far back the recovery points can go?
In continuous data protection (CDP) technology, the factor that determines how far back the recovery points can go is the retention period.
Retention period refers to the amount of time that a CDP system retains the historical data changes that have been captured. The retention period determines how far back in time a system can go to recover data. For example, if the retention period is set to 7 days, the CDP system can provide recovery points up to 7 days back in time.
The retention period is typically configured by the system administrator or the organization's IT policies. The retention period may vary depending on the organization's needs, compliance requirements, and the resources available to support the storage and management of the historical data changes.
It's worth noting that the retention period can also affect the performance and storage requirements of a CDP system. A longer retention period may require more storage space and may impact system performance, while a shorter retention period may limit the availability of recovery points.
Therefore, the retention period should be carefully chosen to balance the organization's data protection needs and available resources.
You can learn more about data protection at
https://brainly.com/question/30487399
#SPJ11
Instructions
You should see the following code in your programming environment:
import simplegui
def draw_handler(canvas):
# your code goes here
frame = simplegui.create_frame('Testing', 600, 600)
frame.set_canvas_background("Black")
frame.set_draw_handler(draw_handler)
frame.start()
Using the house program we started in Lesson 6.5 as a reference, write the code to draw a house. You should add your own features to the drawing, such as decorating the rest of the canvas by changing the background color or adding objects like trees and the sun.
Here's an example code that draws a simple house with a green background, a sun, and some trees:
What is a draw handler?Used to assign draw callbacks to spaces. Basically every time the room is redrawn the assigned method is called. Most commonly used in combination with bgl and blf to draw overlays on the screen.
import simplegui
# set canvas size
CANVAS_WIDTH = 600
CANVAS_HEIGHT = 600
# define draw handler
def draw_handler(canvas):
# draw green background
canvas.draw_polygon([(0, 0), (0, CANVAS_HEIGHT), (CANVAS_WIDTH, CANVAS_HEIGHT), (CANVAS_WIDTH, 0)], 1, "Green", "Green")
# draw sun
canvas.draw_circle((500, 100), 50, 2, "Yellow", "Yellow")
# draw house
canvas.draw_polygon([(200, 200), (200, 400), (400, 400), (400, 200)], 2, "Red", "White")
canvas.draw_polygon([(200, 200), (300, 100), (400, 200)], 2, "Red", "White")
canvas.draw_polygon([(250, 300), (250, 350), (300, 350), (300, 300)], 2, "Black", "Black")
# draw trees
canvas.draw_circle((100, 500), 50, 2, "Green", "Green")
canvas.draw_polygon([(80, 500), (120, 500), (100, 400)], 2, "Brown", "Green")
canvas.draw_circle((500, 500), 50, 2, "Green", "Green")
canvas.draw_polygon([(480, 500), (520, 500), (500, 400)], 2, "Brown", "Green")
# create frame
frame = simplegui.create_frame('House Drawing', CANVAS_WIDTH, CANVAS_HEIGHT)
# set canvas background
frame.set_canvas_background("Green")
# register draw handler
frame.set_draw_handler(draw_handler)
# start frame
frame.start()
The code should draw a green background, a red house with white windows and a black door, a yellow sun, and two trees. You can modify the code to add your own features and experiment with different colors and shapes.
Learn more about canvas,
https://brainly.com/question/12547765
#SPJ1
select all of the following properties about multidimensional scaling (mds) that are true. group of answer choices A. mds always reduces a high-dimensional space to a 2d projectionB. an mds projection can be rotated and/or reflected without changing how it is interpreted C. mds removes outliers from the dataset, so none appear in the 2d projection each of the points in D. the mds 2d projection correspond to a high-dimensional column from the original dataframe in the 2d projection created by mds, the axes have no meaning in the 2d projection created by mds, the axes correspond to high-dimensional variance axes
The following are the true properties of multidimensional scaling (MDS) in the given question: An MDS projection can be rotated and/or reflected without changing how it is interpreted In the 2D projection created by MDS, the axes correspond to high-dimensional variance axes.
1. An MDS always reduces a high-dimensional space to a 2D projection. This statement is false as MDS can reduce high-dimensional space to 3D projection as well.
2. MDS removes outliers from the dataset, so none appear in the 2D projection. This statement is false.
3. Each of the points in the MDS 2D projection corresponds to a high-dimensional column from the original data frame. This statement is false.
4. In the 2D projection created by MDS, the axes have no meaning. This statement is false. Multidimensional scaling (MDS) is a way to visualize similarities and differences between sets of data points. MDS reduces a high-dimensional dataset to a low-dimensional dataset for visualization purposes. The properties of MDS include that it can be rotated and/or reflected without changing how it is interpreted, and the axes correspond to high-dimensional variance axes in the 2D projection created by MDS.
Learn more about MDS visit:
https://brainly.com/question/29809025
#SPJ11
Multiple Choice Question Which of the following spreadsheet functions will calculate the $614.46 present value of an ordinary annuity of $100 per year for 10 years at 10% per year? O =PV(0.10,10,-100,0,0) O=FV(0.1,10,100,0,0) O =PV(100,0,1,0,10,0)O =PV(10,-100,0,1,0,0)
The appropriate spreadsheet function that calculates the present value of an ordinary annuity of $100 per year for 10 years at 10% per year is PV(0.10,10,-100,0,0). The correct answer is a.
A spreadsheet is a software application used to store, manipulate, and analyze data. It is an excellent tool for handling data such as business expenses, income, customer data, and financial projections among others. Additionally, it has multiple functions that aid in making work easier and simpler. In order to calculate the present value of an ordinary annuity of $100 per year for 10 years at 10% per year, the most appropriate function to use is the present value function, which is given as: PV(rate, nper, pmt, [fv], [type])where: rate = the interest rate per period
nper = the total number of payment periods in an annuity
pmt = the payment made in each period (in this case, $100 per year)
fv = the future value of the annuity (in this case, $0 since it is an ordinary annuity)
type = the type of annuity (in this case, $0 since it is an ordinary annuity)
Therefore, using the function, the present value of the ordinary annuity can be calculated as follows:PV(0.10,10,-100,0,0) = $614.46Thus, the answer to the question is option A, PV(0.10,10,-100,0,0).Learn more about spreadsheet here: https://brainly.com/question/26919847
#SPJ11
imagine that each allele at the bxpoo7 locus is found at exactly the same frequency in a population. since there are 8 possible alleles at the bxp007 locus, what is the frequency of any one allele from this locus in the population.
The frequency of any one allele from this locus in the population is 1/8 or 0.125.
An allele is a variation of a gene that determines a unique trait. These are located on chromosomes and are identified by molecular biologists. The complete genetic makeup of an organism, known as its genotype, determines its unique physical characteristics or phenotype. This genotype may be a combination of two or more alleles inherited from its parents. In genetics, an allele is a gene variant that has arisen through mutation and is found at the same position on a chromosome.Since there are eight possible alleles, each allele has a frequency of 1/8 or 0.125. Therefore, the frequency of any one allele from this locus in the population is also 0.125 or 12.5%.
Learn more about genetics:https://brainly.com/question/1480756
#SPJ11
What are the 4 most common types of data? (Give an example of each and explain when and why you might use them)
The information is primarily divided into four categories:
Nominal data.Regular data.Separate data.Constant data.What is Nominal data?Nominal data is a subset of qualitative data that categorizes variables. You can think of these categories as nouns or labels because they are merely descriptive, lack any quantitative or numerical significance, and cannot be arranged in any form of useful order or hierarchy. Variables without a quantitative value are labeled using nominal data. Male/female, hair color, countries, names of people, and others are typical examples—although they are a little out of date. Basically, they're labels, to put it plainly (and nominal comes from "name" to help you remember). In contrast to a collection of non-parametric ordered variables known as ordinal data, nominal data are a collection of non-parametric variables.To learn more about Nominal data, refer to:
https://brainly.com/question/14189587
Which of thefollowing wiring connectors should the technician use when terminating the cable?
A.BNC
B.RJ-12
C.RJ-45
D.ST
E.F-connector
The wiring connectors that a technician should use when terminating the cable are RJ-45.
The RJ-45 is a type of connector commonly used in Ethernet networking applications. The connectors are also used for other purposes such as telecommunications, video, and audio transmissions. The RJ-45 connector is an eight-pin connector that is used for connecting twisted-pair cable.A connector is a device that is used to connect cables to other cables or devices. There are many different types of connectors that are used in the industry, each with its own specific function. Some connectors are used for power, some for data, and others for audio and video.
An RJ-45 connector is a type of connector that is used for Ethernet networking applications. It is an eight-pin connector that is used for connecting twisted-pair cable. The connector has a locking tab that prevents the cable from being pulled out accidentally. RJ-45 connectors are used for a variety of applications such as telecommunications, video, and audio transmissions.
Learn more about RJ-45: https://brainly.com/question/30457663
#SPJ11
Anderson Windows lowered costs, enhanced quality and variety, and improved its response time to customers by
A. creating a new paper-based catalog.
B. creating an interactive computer version of its paper catalogs.
C. creating an integrated computer system of catalogs, products, orders, and manufacturing.
D. creating a manufacturing system for ordering parts.
Anderson Windows lowered costs, enhanced quality and variety, and improved its response time to customers by creating an integrated computer system of catalogs, products, orders, and manufacturing. The correct option is C.
Anderson Windows improved its response time to customers, enhanced quality and variety and reduced costs by creating an integrated computer system of catalogs, products, orders, and manufacturing. This helped in achieving the following benefits:
It enables the company to connect different levels of the supply chain, from the production department to customers.It enables the company to eliminate many of the non-value-adding activities associated with the traditional approach. The company is able to move products more effectively and can reduce production costs by coordinating the supply chain through better forecasting and planning capabilities.It helps the company to understand its customers better, which helps them to better manage their relationship with their customers.In short, by creating an integrated computer system of catalogs, products, orders, and manufacturing Anderson Windows lowered costs, enhanced quality and variety, and improved its response time to customers.
You can learn more about Windows at
https://brainly.com/question/1594289
#SPJ11
A construction firm intends to use technology to enhance their architectural designs architecture.Which of the following technologies should they use?
A) MIDI software
B) vector graphics software
C) sampling software
D) CAD software
A construction firm that intends to use technology to enhance their architectural designs should use CAD software.
What is CAD software?Computer-aided design (CAD) software is a software program used by architects, engineers, drafters, artists, and others to create precise drawings or technical illustrations. It enables them to quickly and accurately create and modify digital prototypes of their products, speeding up the design process and reducing errors.
CAD is used by a variety of professionals, including architects, industrial designers, engineers, and others, to create three-dimensional (3D) models of their designs. These digital representations can then be evaluated, modified, and simulated to ensure that the final product is safe, functional, and visually appealing.
In conclusion, a construction firm that wants to use technology to improve its architectural designs should use CAD software.
Learn more about CAD software here: https://brainly.com/question/18995936
#SPJ11
given the following er diagram (where a is connected to r with a regular line, and r is connected to b with a bold line with a regular arrow), which of the following statements are true? a) true false r connects each entity in a to at least one entity in b (b) true false r connects each entity in a to at most one entity in b (c) true false r connects each entity in b to at least one entity in a (d) true false r connects each entity in b to at most one entity in a g
For the ER diagram (where A is connected to R with a regular line, and R is connected to B with a bold line with a regular arrow), the following statements are true:
True: R connects each entity in A to at most one entity in B.
True: R connects each entity in B to at least one entity in A.
Thus, the correct option is (B) and (C).
The regular line connecting entity A with entity R indicates a one-to-many relationship, i.e., one entity A can be connected with several entities R. The bold line with the regular arrow connecting entity R with entity B indicates a one-to-one relationship, i.e., one entity R is connected with at most one entity B.
To learn more about "er diagram", visit; https://brainly.com/question/31143445
#SPJ11
What is the Spring framework really all about? and how to getting started with spring framework by java?
The Spring Framework is a popular open-source Java framework that provides comprehensive support for building enterprise-level applications.
It is based on the principles of Dependency Injection (DI) and Inversion of Control (IoC), which help to simplify application development and improve code modularity. Spring also provides support for a wide range of other features such as MVC, Security, Data Access, and more.
To get started with Spring, you need to have a basic understanding of Java programming and Object-Oriented concepts. You can then download the Spring Framework and set up your development environment.
Spring provides a variety of tools and resources to help you get started, including documentation, tutorials, and sample applications. From there, you can begin building your own Spring applications using its various features and modules.
For more questions like Java click the link below:
https://brainly.com/question/29897053
#SPJ11
a circuit board containing the essential components of a computer system is called a
motherboard. The motherboard acts as the computer's primary printed circuit board (PCB), offering a framework for all other parts to connect to and communicate with one another.
The motherboard is a computer system's main circuit board that houses and links all of the crucial parts. It serves as the foundation of any computer, giving the CPU, RAM, and other peripheral components a platform to interact and work together as a coherent system. The motherboard has numerous connections for attaching external devices including keyboards, mouse, and USB devices as well as slots for adding expansion cards like graphics cards or sound cards. The BIOS, a piece of firmware that handles the system's settings and configurations and regulates and initialises the hardware upon startup, is likewise housed on the motherboard. The reliability and performance of a computer system can be considerably impacted by the motherboard's quality and compatibility.
Learn more about motherboard here:
https://brainly.com/question/30511045
#SPJ4
true or false? the recovery time objective (rto) expresses the maximum allowable time in which to recover the function after a major interruption. true false
The given statement "the Recovery Time Objective (RTO) expresses the maximum allowable time in which to recover the function after a major interruption." is true. It is because the Recovery Time Objective is defined as the maximum amount of time it should take to recover a system or application after a disruption in service or a disaster occurs.
The Recovery Time Objective expresses the allowable downtime or service interruption that an organization can tolerate before the consequences become unacceptable. The RTO is a critical metric in disaster recovery planning and helps organizations determine their recovery strategies and solutions.
You can learn more about recovery time objective at
https://brainly.com/question/14587172
#SPJ11
you are one of the it administrators for your company. your coworker, rachel, says that when she boots her computer, it displays a message saying that one of her programs had an error while loading and is not working. to fix this issue, you would like to see if windows can provide a log file that may give you a hint about what is failing at boot time. which of the following microsoft tools or consoles would most likely give you the ability to create such a log file?
Answer:
The "Event Viewer" in the "Computer Management" console is a Microsoft tool that allows you to view logs related to various events and errors on your computer. To troubleshoot the issue that Rachel is experiencing with her computer, you could use the Event Viewer to create a log file that may provide information about the program that is failing to load during boot time.
Explanation:
When you are editing digital audio, you typically work with
OA. compressed
C. uncompressed
E. compact
Save Answe
audio file formats.
B. zipped
OD. uncommon
When you are editing digital audio, you typically work with compressed
What is a Digital Audio?The technique used to represent audio in digital form is known as digital audio. When an analogue audio signal is transformed into electrical signals—"on/off" pulses—rather than electromechanical signals, the digital audio chain is initiated. The signal is then further encoded to guard against any faults that might happen during signal transmission or storage. The "channel coding" is necessary for the digital system to reconstruct the analogue signal when it is replayed. Eight to Fourteen Bit Modulation, a channel code used in audio Compact Discs, is an illustration.With a specific sampling rate and bit resolution, an analogue signal is transformed into a digital signal that may have many channels (2 channels for stereo or more for surround sound).
To know more about Digital Audio,click on the link :
https://brainly.com/question/30502124
#SPJ1
All but one of the following is an aspect of messages that foster the peripheral route. Which one is not?
A) Message order.
B) Format.
C) Distractions.
D) Source Credibility.
E) All of the above are aspects of the messages of the peripheral route.
The option that is an aspect of messages that foster the peripheral route is A) Message order.
Peripheral Route- In peripheral route persuasion, one relies on peripheral cues such as the fame of the message source or the attractiveness of the model in the message to persuade others.
The peripheral route of communication is one of two routes of communication, the other being the central route of communication. Because it relies on peripheral cues to persuade others rather than on the content of the message itself, the peripheral route of communication is so called.
Peripheral route of persuasion factors- Messages that foster the peripheral route of persuasion include:-
Source credibility- Message order- Format- Distractions.
Therefore, A) Message order is not an aspect of messages that foster the peripheral route.
To learn more about "message order", visit: https://brainly.com/question/31140148
#SPJ11
a standard security technology for establishing an encrypted link between a web server and a browser, ensuring that all data passed between them remains private; involves the use of ssl certificates which are electronic documents that confirm the identity of a website or servicer and verify that the public key belongs to a trustworthy individual or company
HTTPS is a standard security technology used to establish a secure, encrypted connection between a web server and a web browser.
SSL certificates are used to confirm the identity of a website or service and to ensure that the public key belongs to a reliable individual or organization. The standard security technology for establishing an encrypted link between a web server and a browser is HTTPS, which ensures that all data transmitted between them remains confidential. SSL certificates are electronic documents that verify the identity of a website or service and confirm that the public key belongs to a trustworthy individual or organization. SSL certificates are commonly used to protect data transfers, credit card transactions, and login credentials, among other things. The web server and the browser must exchange SSL certificates before beginning a secure HTTPS connection. The SSL certificate encrypts the data transmitted between the two endpoints, making it impossible for third-party entities to intercept it. The SSL certificate also validates the identity of the web server, ensuring that users connect to the correct site. In conclusion, to establish an encrypted link between a web server and a browser, SSL certificates are a standard security technology that must be used. SSL certificates are electronic documents that verify the identity of a website or service and confirm that the public key belongs to a trustworthy individual or organization.To know more about SSL certificates:https://brainly.com/question/8985851
#SPJ11
import simplegui
import random
frameWidth = 500
def draw_handler(canvas):
for i in range (1, 3000):
r = random.randint(0,255)
g = random.randint(0,255)
b = random.randint(0,255)
randRGBColor = "RGB( " + str(r) + "," + str(g) + "," + str(b) + ")"
x = random.randint(2, frameWidth)
y = random.randint(2, frameWidth)
canvas.draw_point((x, y), randRGBColor)
frame = simplegui.create_frame('Howdy - I love this program', frameWidth, frameWidth)
backg = "RGB( " + str(255) + "," + str(255) + "," + str(255) + ")"
frame.set_canvas_background(backg) # do it once instead of thousands upon thousands of times
frame.set_draw_handler(draw_handler)
frame.start()
According to the question of RGB, the solution of the program is given below:
What is RGB?RGB stands for Red, Green, and Blue. It is a system of three colors that is used in digital images and video, as well as in print publishing, to create a wide array of colors. The three colors are combined in various proportions to create different shades and hues. RGB is an additive system, meaning that when the three colors are combined at full intensity, they create white. When the colors are mixed in equal parts, they create gray.
import simplegui
import random
frameWidth = 500
def draw_handler(canvas):
for i in range (1, 3000):
r = random.randint(0,255)
g = random.randint(0,255)
b = random.randint(0,255)
randRGBColor = "RGB( " + str(r) + "," + str(g) + "," + str(b) + ")"
x = random.randint(2, frameWidth)
y = random.randint(2, frameWidth)
canvas.draw_point((x, y), randRGBColor)
frame = simplegui.create_frame('Howdy - I love this program', frameWidth, frameWidth)
backg = "RGB( " + str(255) + "," + str(255) + "," + str(255) + ")"
frame.set_canvas_background(backg) # do it once instead of thousands upon thousands of times
frame.set_draw_handler(draw_handler)
frame.start()
To learn more about RGB
https://brainly.com/question/12142761
#SPJ1
Your organization has 75 workstations that each need a software program installed. Which of the following is the BEST choice to accomplish this?Purchase an enterprise license for the software program and reuse the activation code for each workstation.
The BEST choice to install the software program on 75 workstations is to "purchase an enterprise license for the software program and reuse the activation code for each workstation". Thus, Option C is correct.
Purchasing an enterprise license for the software program and reusing the activation code for each workstation is the best option because it allows for a cost-effective and efficient way to install the software program on multiple workstations. It also ensures that the software program is installed legally and that all workstations have the same version, which simplifies maintenance and support.
Additionally, this option provides centralized control and management of the software program, which can be beneficial for updates and upgrades. The other options are either illegal or too expensive and inefficient, making the enterprise license the most practical and responsible choice.
Option C holds true.
The complete question:
Your organization has 75 workstations that each need a software program installed. Which of the following is the BEST choice to accomplish this?
a. Purchase one personal license for the software program and then search online for additional activation codes provided by third parties or activation code generators.b. Purchase a personal license for the software program and reuse the activation code for each workstation.c. Purchase an enterprise license for the software program and reuse the activation code for each workstation.d. Purchase 75 personal licenses for the software program and use each unique activation code for each workstation.Learn more about software program https://brainly.com/question/27359435
#SPJ11
he police was able to identify the outgoing numbers dialed by an individual that was under investigation by using the electronic pulses of the phone. Which of the following is likely the device the police used?
A. Crime scene technology
B. Less-lethal device technology
C. Information Technology
D. Database Technology
The device the police are likely to have used to identify the outgoing numbers dialed by an individual that was under investigation by using the electronic pulses of the phone is "Information Technology".so c is the correct option.
Information technology (IT) is a sector that involves the utilization of computers, networks, software, and other digital infrastructure components to manage and store data.
IT is utilized in virtually every aspect of modern life, including smartphones, social media, and online transactions. Computers, servers, databases, and networks are used to build and run IT systems.
The digital data can be used to track the electronic pulses and thus identify the outgoing numbers dialed by the individual under investigation. It is for this reason that it is likely that the device used by the police was information technology.
Therefore, the correct option is C. Information Technology.
To know more about Information Technology:https://brainly.com/question/12947584
#SPJ11
when performing a total cost of ownership (tco) analysis between on-premises and the aws cloud, which factors are only relevant to on-premises deployments? (select two.)
A. Facility operation cost B. Operating system licensing C. Database administration
D. Hardware procurement teams E. Application licensing
When performing a total cost of ownership (TCO) analysis between on-premises and the AWS Cloud, factors only relevant to on-premises deployments include D. Hardware procurement teams and A. Facility operation cost
Total Cost of Ownership (TCO) AnalysisTotal Cost of Ownership (TCO) Analysis is a way of determining the cost of using cloud services as opposed to traditional IT. A TCO analysis allows an organization to compare the costs of purchasing and managing on-premises infrastructure to the costs of using cloud infrastructure, including public cloud providers like Amazon Web Services (AWS).
The analysis includes factors such as hardware costs, software licensing, support costs, and other indirect expenses. The analysis must also consider the organization's staff, facilities, and other infrastructure costs.
Learn more about total cost of ownership (TCO) analysis:https://brainly.com/question/14650926
#SPJ11
functional programming excels at 'transactional' programming where a specific desired outcome is required for specific parameters. T/F
The statement "Functional programming excels at "transactional" programming where a specific desired outcome is required for specific parameters" is true.
In functional programming, programs are treated as a set of mathematical functions, and the output of these functions is determined by the input given. When a set of inputs is given, the function's output is calculated, and the function doesn't have any external effects in the environment where it is called. It means that functional programming is suitable for developing programs that operate under transactional constraints, such as financial or e-commerce transactions.
Among the benefits of functional programming are referential transparency, which means that the same input will always produce the same output, regardless of where it is used. It's also easier to debug because the functions are pure, so there is no hidden state. Additionally, functional programs are simple to test and parallelize because they don't rely on mutable states or global variables. Thus, we can conclude that the given statement is true, i.e., functional programming excels at "transactional" programming where a specific desired outcome is required for specific parameters.
Learn more about Functional programming : brainly.com/question/29855184
#SPJ11
match each active directory term on the left with its corresponding definition on the right. drag drop logical organization of resources collection of network resources collection of related domain trees network resource in the directory group of related domains
Logical Organization of Resources - A logical organization of resources is a structure that is used to logically organize network resources in the directory.
Logical organization is the process of arranging information in a way that makes sense. It involves using a structure that is logical and easy to follow, and that presents the material in a way that will be most helpful to the reader. In order to effectively organize information, it is important to understand the purpose of the material and the audience it is intended for. This will help determine the best order for the pieces of information, as well as the most appropriate way to group them together.
Collection of Network Resources - A collection of network resources is a group of related domains that contain network resources like computers, printers, and users.
Collection of Related Domain Trees - A collection of related domain trees is a group of related domains that are organized in a hierarchical fashion.
Network Resource in the Directory - A network resource in the directory is an individual network resource that is stored in the directory and can be accessed by users.
To learn more about logical organization
https://brainly.com/question/14100214
#SPJ1
Logical Organization of Resources - A logical organization of resources is a structure that is used to logically organize network resources in the directory.
What is logical organization?Logical organization is the process of arranging information in a way that makes sense. It involves using a structure that is logical and easy to follow, and that presents the material in a way that will be most helpful to the reader. In order to effectively organize information, it is important to understand the purpose of the material and the audience it is intended for. This will help determine the best order for the pieces of information, as well as the most appropriate way to group them together.
Collection of Network Resources - A collection of network resources is a group of related domains that contain network resources like computers, printers, and users.
Collection of Related Domain Trees - A collection of related domain trees is a group of related domains that are organized in a hierarchical fashion.
Network Resource in the Directory - A network resource in the directory is an individual network resource that is stored in the directory and can be accessed by users.
To learn more about logical organization, visit:
https://brainly.com/question/16787538
#SPJ1
abstraction, when done well, doesn't create vague code. rather, it gives clearer semantics and allows the programmer to be more precise. True or false
The statement abstraction, when done well, doesn't create vague code. rather, it gives clearer semantics and allows the programmer to be more precise is true.
Abstraction is the process of reducing complexity by creating a simplified model of a more complex system. This model can be used to understand the system, make predictions about its behavior, and make decisions about how to interact with it. It is also used to hide complexity from the user by providing a simplified interface to a more complex system.
When abstraction is done well, it doesn't create vague code. Rather, it gives clearer semantics and allows the programmer to be more precise. This is because abstraction allows the programmer to focus on the important details of a system and ignore the irrelevant ones. By ignoring the irrelevant details, the programmer can create simpler and more efficient code that is easier to understand and maintain.
Overall, abstraction is an essential concept in computer science that allows us to create simpler and more efficient systems.
Learn more about abstraction:https://brainly.com/question/30454471
#SPJ11
Is a Trojan a malicious program that uses a computer network to replicate?
A Trojan is a malicious program that disguises itself as harmless or useful software. It is capable of causing significant harm to the infected computer, network, or device. Trojans may take various forms, such as ransomware, spyware, or adware, and may steal or damage information.
Although Trojans can be used to replicate themselves, they do not spread by themselves. Instead, they are usually spread through social engineering tactics, such as phishing emails, fake websites, or infected software downloads. Trojans can infect computers, networks, and devices without the user's knowledge and can often remain undetected for long periods.
Once a Trojan has infected a system, it can cause a variety of malicious activities, including:
Installing additional malware or viruses
Collecting sensitive information, such as passwords or banking details
Stealing personal or confidential data
Encrypting files or locking the user out of the system
Remote access to the system or network
Creating a backdoor into the system for future attacks
To protect against Trojans, it is essential to use reputable antivirus software and firewalls. Users should also exercise caution when opening email attachments, clicking on links, or downloading software from unknown sources. Finally, regular updates and patches to operating systems and software are crucial in preventing Trojan infections.
For such more questions on Trojan :
brainly.com/question/29590559
#SPJ11
A Trojan is a malicious program that disguises itself as legitimate software or files and tricks users into downloading them onto their computer. Unlike viruses or worms, Trojans do not replicate or self-replicate. They rely on human action to spread and carry out their malicious activities.
Explanation:A Trojan is a type of malicious program that disguises itself as a legitimate software or file and tricks users into downloading it onto their computer. Unlike viruses or worms, Trojans do not replicate or self-replicate. Instead, they rely on human action, such as opening an infected email attachment or downloading a file from an untrustworthy website, to spread and carry out their malicious activities.
Learn more about Trojan here:https://brainly.com/question/35919210
T/F the goal of the child online protection act (copa) was to protect children from harmful material on the world wide web, however, it was ruled unconstitutional.
The given statement is true becasue the goal of the Child Online Protection Act (COPA) was to protect children from harmful material on the World Wide Web; however, it was ruled unconstitutional.
The Child Online Protection Act (COPA) was enacted in 1998. The act made it a crime for commercial websites to distribute material that was harmful to children. A website is considered commercial if it sells something, advertises a product or service, or uses the internet to solicit business. In addition to criminal sanctions, the act also included civil penalties for violations.
The goal of COPA was to protect children from harmful material on the World Wide Web. However, the law was challenged in court, and it was eventually ruled unconstitutional on First Amendment grounds. In 2009, the Supreme Court upheld a lower court's ruling that the law was too broad and would have a chilling effect on free speech.
Therefore, the goal of the Child Online Protection Act (COPA) was to protect children from harmful material on the World Wide Web, however, it was ruled unconstitutional.
You can learn more about Child Online Protection Act (COPA) at
https://brainly.com/question/16594162
#SPJ11
when describing blocks of ip addresses, what does cidr do?
Classless inter-domain routing is known as CIDR. It is an approach to IP address distribution and packet routing. An IP address's network prefix is specified via CIDR.
CIDR (Classless Inter-Domain Routing) is a more effective and adaptable method of allocating and routing Internet Protocol (IP) packets than the conventional IP address classes. A variable-length subnet mask (VLSM) is used by CIDR to distribute IP addresses, enabling more accurate distribution and greater address space use. Routing is made easier and subnets may be easily created thanks to the CIDR notation, which specifies the amount of bits in the network portion of the address. Internet Service Providers (ISPs) and network administrators manage IP addresses and routing tables using CIDR, which has evolved into the industry standard for IP address allocation and routing.
Learn more about CIDR here:
https://brainly.com/question/30775427
#SPJ4
Which of the following represents the correct order in which you should install components into the case after disassembling a computer?a. power supply, drives, motherboard, cards
b. drives, motherboard, cards, power supply
c. cards, motherboard, power supply, drives
d. motherboard, drives, cards, power supply
The correct order to install components into the case after disassembling a computer is: "power supply, drives, motherboard, cards". Thus, Option A is correct.
This is because this order allows for proper cable management and avoids interference with other components during installation.
Starting with the power supply ensures proper cable management and allows for easy access to connect the power cables to the motherboard and other components, followed by the installation of drives to avoid any possible damage to the motherboard during installation.
The motherboard should be installed next, followed by any expansion cards, which should be installed last to avoid interference with other components. This order ensures that all components are properly installed and connected, reducing the risk of damage and ensuring proper functionality of the computer.
Learn more about disassembling a computer https://brainly.com/question/30561810
#SPJ11