microsoft's point-to-point encryption uses encryption keys that have varying length of what size?

Answers

Answer 1

Microsoft's Point-to-Point Encryption (P2PE) does not specify a specific length for encryption keys. The length of encryption keys used in P2PE can vary depending on the encryption algorithm and security requirements implemented by Microsoft or the specific P2PE solution being used.

In encryption systems, the length of encryption keys is an important factor in determining the strength of the encryption. Longer keys generally provide greater security as they increase the possible combinations that need to be tested for a successful attack. Common key lengths used in modern encryption algorithms include 128-bit, 256-bit, and even higher.

Microsoft employs various encryption algorithms and protocols in their products and services, such as Advanced Encryption Standard (AES), which supports different key lengths. For example, AES can use 128-bit, 192-bit, or 256-bit keys.

The specific key length used in Microsoft's P2PE implementation would depend on factors such as the encryption algorithm, compliance requirements, industry standards, and the level of security needed for the particular application or service.

To know more about Microsoft, visit https://brainly.com/question/30362851

#SPJ11


Related Questions

Choose the correct qurey to remove a record with names "John" in the persons table
(a) Delete from persons where name="John";(b) Delete from table1 where name="John";(c) Delet from persons where name="John";(d) Delet from persons where name="Alex";

Answers

Answer:

a

Explanation:

The correct syntax would be:

DELETE FROM persons WHERE name='John'

i.e., use single quotes. Uppercase keywords is not required but preferred by many.

which of the following can be represented by a sequence of bits. 1. An integer 2. An alphanumeric character 3. A machine language instruction

Answers

Answer:

all of them

Explanation:

In a computer program, this is how numbers, text and program instructions are stored.

Please help

Measure the thickness of a razor blade using a vernier caliper and screw gauge. What is the lowest count of these instruments? Which measuring
Instrument is more accurate? You can take multiple blades and stack them together, then measure thickness, and find out the average thickness.

Answers

Answer:

Is this question related to computers and technology?

A virus which deceive the user by acting as a legitimate file.

Answers

Answer:

A Trojan virus

Explanation:

It acts like a bona fide application or file to trick you. It seeks to deceive you into loading and executing the malware on your device

Question #5
Multiple Choice
What is used within an HTML tag for additional information?
O attribute
O anchor
O hyperlink
metadata

Answers

Answer: Attribute

Explanation: Attribute is used in HTML tags for additional information. Correct on Edg 2021.

Answer: attribute

Edge '23

What are the main purposes of an operating system?

Answers

Answer:

An operating system has three main functions: (1) manage the computer's resources, such as the central processing unit, memory, disk drives, and printers, (2) establish a user interface, and (3) execute and provide services for applications software.

3.1.2 Quiz: What Can Information Technology Do for You? Question 8 of 10 What is one reason why a business may want to move entirely online? A. To double the number of employees B. To avoid paying state and local taxes C. To focus on a global market D. To limit the number of items in its inventory​

Answers

Answer:

C. To focus on a global market

Explanation:

Information technology can be defined as a set of components or computer systems, which is used to collect, store, and process data, as well as dissemination of information, knowledge, and distribution of digital products.

An information technology interacts with its environment by receiving data in its raw forms and information in a usable format.

Generally, it is an integral part of human life because individuals, organizations, and institutions rely on information technology and systems in order to perform their duties, functions or tasks and to manage their operations effectively. For example, all organizations make use of information technology and systems for supply chain management, process financial accounts, manage their workforce, and as a marketing channels to reach their customers or potential customers.

Additionally, an information system or technology comprises of five (5) main components;

1. Hardware.

2. Software.

3. Database.

4. Human resources.

5. Telecommunications.

Hence, information technology or system relies on the data it receives from its environment, processes this data into formats that are usable by the end users.

One reason why a business may want to move entirely online is to focus on a global market through the use of social media platforms and networks to reach out to customers in various geographical location.

Write the Python programs for the
following:
To input a number and check if it is
even or odd number​

Answers

Answer:

num = int(input("Enter a number: "))

if (num % 2) == 0:

print("{0} is Even number". format(num))

else:

print("{0} is Odd number". format(num))

who developed vacuum tube and when?​

Answers

Answer:

In 1904, John Ambrose Fleming invented the first vacuum tube.

Explanation:

Jon Ambrose Flemming invented the vacuum tube in 1904

How do computers multitask in an ideal situation?
a. slowly
b. every 30 seconds
c. manually
d.automatically

Answers

Answer:

Automatically

Explanation:

In an ideal situation, computers would multitask quickly and without human interference.

What are the basic parts of sewing machine?​

Answers

Answer:

1. Spool Pin  

Thread usually comes on a spool. That is the wooden thread holder you buy in the store. The spool pin holds the spool of thread for you making it easier for you to thread your machine and keep the thread coming as you want it to. Read about the spool pin felt.

2. Bobbin Binder Spindle  

A bobbin is a little cylinder that may come with or without flanges. It holds the thread that is wound around it. The spindle is where the bobbin is placed during winding.

3. Bobbin Winder Stopper  

The bobbin is only so large. It cannot always hold the amount of thread you want to put on it. This part stops the bobbin from collecting thread when it has reached full capacity.

4. Stitch Width Dial  

On many newer sewing machines, you get a variety of stitch options to use. The purpose of this part is to control the zig-zag stitch option while you are busy concentrating on your sewing.

5. Pattern Selector Dial  

This little dial allows you to select one stitch pattern out of the many that come built into your sewing machine. You just turn the dial to get the pattern that you want on your clothes and other fabrics you want to mend or create.

6. Hand Wheel  

This is the manual needle control which raises or lowers the needle. It is usually located at the right-hand side of the machine. It shouldn’t be that hard to turn.

7. Stitch Length Dial  

More recent sewing machines may have this part attached to them. Its purpose is to control the length of your selected stitch. This helps you stay in control of your sewing duties and make sure you get what you want and need.

8. Reverse Stitch Lever  

Once you push this lever, you get to sew in the opposite direction. This function makes your sewing a little easier and faster to do because you can go forward or in reverse when you need to.

9. Power Switch  

You already know what this switch does. The key to using it is to make sure you turned your sewing machine off before you walk away. Also, it should be located at the right side of your machine.

10. Bobbin Winder Thread Guide  

When you activate this part on your sewing machine, you are guiding the thread towards the bobbin/ This makes winding your thread up a little easier and should prevent twists, tangles or caught thread.

11. Thread Tension Dial  

Tension is important when you do your sewing. Too loose can cause you problems and too much tension could snap your thread and make sewing more time consuming as you have to re-thread the machine. This little part simply controls the tension on the thread so be careful when you use it.

12. Thread Take-Up Lever  

Your top thread passes through this part as you do your sewing. The lever moves up and down with your needle so do not be alarmed that it is constantly moving.

13. Needle Clamp Screw  

Needles do not stay in place by themselves. It would be nice if they did. You need this part to hold your needle where it is supposed to be. It also makes sure your needle is secure as it moves.

14. Presser Foot  

This is the part that holds your fabric so it doe snot slip all over the place while you are working. Controlling your fabric is important while you do your sewing.

15. Bobbin Cover  

Your sewing machine parts do need some protection to keep them in top working order and to help then last you for years. This is the job of the bobbin cover. It protects the bobbin as it covers it.

16. Bobbin Cover Release Button  

Also, you need access to your bobbin when it its filled with thread or there is a problem. This release button helps you to remove the bobbin cover so you have complete access to your bobbin.

17. Feed Dog  

It is an interesting name, but it has a very straightforward function., This part feeds your fabric through the sewing machine while you are sewing. This helps you concentrate on other sewing needs as you work.

18. Needle  

Another self-explanatory label that tells you everything you need to know. The needle is an integral part of the sewing machine and without it, the other parts cannot do their job.

19. Needle Plate  

This part is located right under the needle and an under the presser foot. Its job is to help move the fabric forward as you sew. It may help help push the fabric back when you use the reverse mode on your sewing machine.

Explanation:

a c program to check the greaster number among the two entered number using if else statement​

Answers

Answer:

#include <stdio.h>

int main(void) {

 int number1, number2;

 printf("Enter first number: ");

 scanf("%d", &number1);

 printf("Enter second number: ");

 scanf("%d", &number2);

 if (number1 > number2) {

   printf("%d is greater than %d!", number1, number2);

 } else if (number2 > number1) {

   printf("%d is greater than %d!", number2, number1);  

 } else {

   printf("%d is equal to %d!", number1, number2);

 }

}

I charge my stylus 2-3 hours a day. But after all the charging the battery only lasts for 5 minutes. I hope someone can rectify this issue for me. Thank you..

Answers

Answer:

Well if your charging it to 100% nd its only lasting 5 minutes it may be because you charger is getting old or is breaking. What model do you have (stylus)

Explanation:

You may need a new internal battery. How long have you had the pen? If it was for a while you may need it to be replaced.


8.

Which of the following text pieces can be easily typed using right hand?
A. stewardess
B. lillipop
C. typewriter
D. FACE



Answers

Answer:

Lillipop

Explanation:

If you have your hands correctly placed on the keyboard, the only hand needed to type the word, "lillipop", is the left hand!

Hope I was of Assistance #SpreadTheLove <3

List out two ways to execute the script.​

Answers

Answer:

1) Execute Shell Script Using File Name. Use the shell script file name to execute it either by using it's relative path or absolute path as shown below

2) Execute Shell Script Using Source Command.

PLS HELP ASAP Which is NOT a component of a packet?
trailer (footer)
protocol
body (payload)
header

Answers

Protocol. Hope this helps!

Need help ASAP

Thankss + BRAINLIST only for correct answers

Answers

Answer:

The purpose to the user is to buy items online.

The purpose to the creator is to have a worldwide service chain to deliver packages.

Vising this website gives access to the items consumers need and allows them to get them shipped right to their door.

It was made so the creator can lots of money along with making a lot of jobs to slow the unemployment rate.

Explanation:

I pulled a lot of this from my head and reading about schollarships Amazon has for students. Amazon is a shopping website. Therefore the user can buy things and it gives the creator money along with making jobs for others.

Page No
Date T 1 1
Ist
ament Write a program in java to find the area and
perimeter of right angled triangle by using function argument.




Answers

Answer:

ila bgfffsg hqhffa hhfw ygga gha yqvvty1uh' fttyavt h5tfauv gtta76rq

a presentation is widely used to present ______ and ______ effectively​

Answers

Answer:

a presentation is widely used to present beautiful and more effectively

Explanation:

hope it will help you :)

how telecommunications works?​

Answers

Answer:

Telecommunications are the means of electronic transmission of information over distances. The information may be in the form of voice telephone calls, data, text, images, or video. Today, telecommunications are used to organize more or less remote computer systems into telecommunications networks.

Explanation:

Jessica has two pens, one red pen and a black pen. The red pen measures 5 inches while the
black one measures 15.24 cenfimefers.
A) How long is Jessica's red pen in centimeters
B) How long is Jessica's black pen in inches
C) which pen is longer
2) John rode 2 kilometers on his bike. His sister Sally rode 3000 meters on her bike. Who rode the
fasthest and
A) How much did John ride in meters
B) How much did Sally ride in kilometers 2012
C) Who rode the farthesten
D) How much farther did they ride (in kilometers)?
E) How much farther did they ride (in meters)?
3) Faye drew two line segments. The first line segment measures 7 inches while the second measures
10 inches.
A) What is the length of the first line segment in centimeters
B) What is the length of the second line segment in centimeters?



branleast ka sakin pag sinagotan moto promise

pag hindi maayos yan report ka sakin​

Answers

Answer:

1.

A) 12.7

B) 6

C) The black pen

2.

A) 2000

B) 3

C) Sally

D) They rode 1 kilometers farther

E) They rode 1000 meters farther

3.

A) 17.78

B) 25.4

Explanation:

A=5×2.54=12.7cmB.=15.24/2.54=6inchC.black pencilsalli rode a bike faster thanjohn.

A.john ride bike in metre=2×1000=2000m

B.salli ride a bike in kilometre=3000/1000=3 km

C.salli rode a bike fastest.sorry i do not know d,e

3.A=7×2.54=17.78cmB.10×2.54=25.4cm

guys do you know any websites that rewrites you text so you don’t get plagiarism?

Answers

it’s called typewrite.com !!!

What are the three components of the fire triangle

Answers

Answer:

Fuel, oxygen, and heat.

Explanation:

What is the name of tool

Answers

Answer:

bro the pic is hazy

Explanation:

but it is looking like octagon

hope it helps you

please mark me as brainlist

Which Creative Commons license type allows others to use and build upon work non-commercially, provided that they credit original author and maintain the same licensing?

Answers

Answer:

Creative Commons license type allows others to use and build upon work non-commercially, provided that they credit original author and maintain the same licensing is described below in detail.

Explanation:

Attribution-Non financially-ShareAlike

This permission lets others adapt, remix, and develop upon your work non-financially, as long as they charge you and license their new inventions under identical times. There are six separate license classes, scheduled from most to least licensed. the material in any mechanism or arrangement, so long as attribution is given to the originator.

Determine if true or false Goal Seek immediately attempts to apply the function to the adjacent cells.

Answers

Answer:

The answer is "False".

Explanation:

This function the part of Excel, that allows a way to resolve the desirable result by manipulating an underlying expectation. This function is also called What-if-Analysis, which is used to test, and an error approach to address the problem by linking guesses before the answer comes.  On the Data tab, throughout the Data Tool category, and select Target Check it provides a    reference that includes a formula to also be solved throughout the Set cell box.

Write a program to allow user to perform any of these list operation given in a menu. The menu is: a) Append an element b) Insert an element c) Modify an existing element d) Delete an existing element with a given value e) Sort the list in descending order f) Display the list.

Answers

Answer:

c

Explanation:

Alice just wrote a new app using Python. She tested her code and noticed some of her lines of code are out of order. Which principal of programing should Alice review?

Hand coding
Line coding
Planning & Analysis
Sequencing

Answers

Answer:

Sequencing

Explanation:

I have taken the test

REALLY EASY NEED HELP!! REWARD BRAINLIEST

Answers

Answer:

c

Explanation:

Answer: It is the first one

Explanation:

function of printer and speaker​

Answers

Nepal .... Free Fire

Other Questions
consider an industry in which only three sellers operate. their supply curves are given by s1(p)=p10, s2(p)=p12, and s3(p)=p14.The market supply presents ____2__ kink(s). An inductor has a peak current of 280 A when the peak voltage at 45 MHz is 3.1 V .Part AWhat is the inductance?L= ?If the voltage is held constant, what is the peak current at 90 MHz ?Express your answer using two significant figures.L= prevailing offshore winds tend to decrease surface water salinity in a coastal plain estuary.T/F it is often said that a drug discovery program is only as good as its assay. what are two potential consequences of carrying out a drug-screening program using a poor assay? rank the following diatomic species of boron in order of bond length and bond strength. ..... a. b2 ..... b. b2 ..... c. b2 Water at the rate of 68 kg/min is heated from 35 to 75oC by an oil having a specific heat of 1.9 kJ/kg oC. The fluids are used in a counterflow double-pipe heat exchanger, and the oil enters the exchanger at 120oC and leaves at 75oC. The overall heat transfer coefficient is 320 W/m^2 oC.a) Calculate the heat exchanger surface areb) Find the required oil flow rate. The Great Recession was different from other recessions since World War II in that: Group of answer choices real gross domestic product (GDP) initially declined and then recovered sometime later. The rate of inflation did not change at all. The rate of unemployment increased and then decreased at a later time. The increase in unemployment was much greater and lasted longer The IQs of nine randomly selected people are recorded. Let Y denote their average. Assuming the distribution from which the Yi's were drawn is normal with a mean of 100 and a standard deviation of 16, what is the probability that Y will exceed 103? What is the probability that anyh arbitary Yi will exceed 103? what is the probability that exactly three of the Yi's will exceed 103? what is the source of hydrogen during the loss of the leaving group to form the free amine? ammonium is used to generate hydrogen gas during the reaction. hydrogen gas is pumped into the solution from an external source. water donates two protons during this phase of the reaction. hexane donates two protons during this phase of the reaction. both hydrogen gas is pumped into the solution from an external source and hexane donates two protons during this phase of the reaction. 3) which representation is easier for a computer to read fixed width records, delimited records, or xml? which of the following correctly compares the significance of the different technologies shown in the images? Which pieces of equipment are used in the distillation setup utilized in the procedure (check all that apply). Select one or more: Thermometer adapter Round-bottomed flask Distillation head Reflux condenser Which statement is true about the approaches used to measure the value of a nation's gross domestic product (GDP) ?AThe expenditure approach to calculating GDP sums the components of the supply side of the economy.BThe income approach to calculating GDP sums the income earned by the factors of production excluding profits.CThe value-added approach to calculating GDP sums the final monetary value of output at each stage of production.DThe expenditure approach to calculating GDP sums the market value of all final goods and services produced by foreigners in a given period of time.EThe expenditure approach to calculating GDP sums consumption spending, investment spending, government spending, and net exports. How much tin is plated out of the solution? A current of 5.27A passed through a Sn(NO3)2 solution for 1.10 hours. How much tin is plated out of the solution? how often should the manager or employees conduct a self-inspection to evaluate the effectiveness of a cleaning program? Someone please answer this A tax is imposed on chewing gum. Consumers pay all of the tax while the producers pay none of the tax. If you were to draw a graph you would see that the demand curveperfectly elastic.perfectly inelastic.is relatively elasticis relatively inelastic. The mass of cobalt-60 in a sample is found to have decreased from 0.800g to 0.200g in a period of 10.5 years. From this information, calculate the half-life of cobalt-60? the textbook discusses where to find types of information such as statistics, news, and background information. which of the following sources is your best choice for finding background information? ________, or buying more goods and services from outside domestic or foreign vendors, is one of the important shifts in marketing and business practices.