Of the 6,960 balloons thrown in a water-ballon fight, 870 were red. At this rate, how many balloons out of 48 would be red? WRITE JUST THE ANSWER WITHOUT UNITS

Answer:

Step-by-step explanation:

WX≅VY

VY = 7

CD≅BE

BE = 13

The correct answer is c. as the age of a student increases, the frequency of the student's ages increases.

A skewed right population means that the data is distributed in such a way that the majority of the values are on the right side of the data set. In the case of a population of college students, this would mean that there is a greater frequency of older students (those in their late twenties or older) than younger students. As the age of a student increases, the frequency of the student's ages increases.

Option a. there are a greater number of older students is also correct, but it is not complete.

Option b. the modal age is greater than the median age is not correct, as the modal age is the most common age in the population and the median age is the middle value of the population, and there is no relationship between them.

Option d. there are more younger students within the population is not correct as a skewed right population indicates the opposite.

Option e. not enough information is not correct as the question is providing enough information to make a conclusion.

To learn more about the skewed right population, visit:

brainly.com/question/3907939

#SPJ4

The constant of variation for the given data is 1/4.

If the corresponding elements of two sequences of numbers, frequently experimental data, have a constant ratio, known as the coefficient of proportionality or proportionality constant, then the two sequences of numbers are proportional or directly proportional.

Given that the data in the table is,

x        f(x)

-8       -2

-4       -1

0        0

4         1

8        2

The constant of proportionality will be calculated as,

F(x) = kx

-2 = k x -8

k = -2 / -8

k = 1 / 4

Here, the proportionality constant will be 1/4.

To know more about the constant of proportionality follow

https://brainly.com/question/28413384

#SPJ1

Submarine must descend 17 feet in the 5th minute.

What is the average of the data?

Only numerical variables, whether continuous or discrete, can be used to calculate the mean. It is calculated by merely dividing the total number of values in a data set by the sum of all the values in the data set. A frequency table of data or raw data can both be used for the calculation.

Let the distance descended by submarine in 5th minute = x feet

Average distance descended by the submarine

= (Total distance distended/ Duration or time)

= (6 + 8 + 14 + 15 + x) / 5

= (43 + x) / 5

Statement given in the question → "Submarine must descend at an average rate of at least 12 feet per minute"

So the inequality for the statement will be,

(43 + x) / 5 ≥ 12

43 + x ≥ 60

x ≥ 17

Therefore, submarine must descend 17 feet in the 5th minute.

To know more about average of the data, click on the link

https://brainly.com/question/20003697

#SPJ1

Answer:

The measure of arcMN is 60°

Step-by-step explanation:

All the way around the circle is 360°. Two marked arcs are 100° and 140°. AngleMON and AngleNOP are marked equal, which means that ArcMN and ArcNP are also equal. So we can write an equation:

100+140 + x+x =360

combine like terms.

240 + 2x = 360

subtract 240.

2x = 120

divide by 2

x = 60

ArcMN is 60°

In the equation [tex]3x-6y=-13[/tex] , the coefficient of equation are , coefficient  of  [tex]x[/tex] is [tex]3[/tex] and the coefficient of [tex]y[/tex] is [tex]-6[/tex] .

What are Coefficients ?

The Coefficients are defined as a number that is placed with a variable. It is a integer that is multiplied by the variable and written next to it.

In simpler words, we can say that ; a coefficient is a multiplicative factor in the terms of a polynomial, a series, or any expression.

The variables that do not have a number written with them are assumed to have 1 as their coefficient.

For example, in the expression [tex]3x[/tex] , the coefficient of [tex]x[/tex] is [tex]3[/tex] ,  but in the expression [tex]x^{2} +3[/tex], [tex]1[/tex] is the coefficient of [tex]x^{2}[/tex].

The equation to find the coefficient is given as [tex]3x-6y=-13[/tex] ,

we see that , the numerical part with [tex]x[/tex] is [tex]3[/tex] and with [tex]y[/tex] is [tex]-6[/tex] ;

Therefore , the coefficient of [tex]x[/tex] is [tex]3[/tex] and [tex]y[/tex] is [tex]-6[/tex] .

The given question is incomplete , the complete question is

What are the coefficients of the equation 3x -6y = - 13 ?

Learn more about Coefficients here

https://brainly.com/question/17436857

#SPJ4

Answer:

1376x-736

Step-by-step explanation:

Take 32 and multiply it by 43. By multiplying vertically, distribute the multiplication of 3 (from 43) times both the 2 and 3 of 32 (right to left)

3 x 2=6; 3 x 3=9:

32

x

43

--------

96

Then, distribute the multiplication of 4 (from 43) times both the 2 and 3 of 32 (right to left) and leave a zero under the last number of your previous answer while moving the distribution of numbers forward.

4 x 2=8; 4 x 3=12

32

x

43

--------

   96

+

1280   <----(this is the zero you must leave under your previous set)

After distributing each number of 43 to each number of 32 while multiplying, add your answers together vertically from right to left and bring down the x:

  96

+

1280

----------

1376x

Now do the same for 32 x -23 after learning vertical multiplication to get -736

Your final answer put together is 1376x-736

The graph of the linear equation 2x - 3y = -15 is a line that passes through the point (-5, 5), and has a slope of 2/3.

The linear equation

2x - 3y = -15

can be written in the form

y = mx + b,

where m is the slope and b is the y-intercept. To find the slope of this equation, we can rearrange the equation to be in the form y = mx + b, which gives us

y = (2/3)x - 5.

This means that the slope of the line is 2/3. To find the y-intercept, we can plug in 0 for x and solve for y. This gives us

y = -5.

Therefore, the graph of this equation is a line that passes through the point (-5, 5) and has a slope of 2/3.

Learn more about graph here

https://brainly.com/question/17267403

#SPJ4

Choose the range of values for the x-axis and the y-axis , Plot the points on the graph, using the logarithmic formula , Connect the points with a smooth curve and Label the axes and add any other details you want to include.

1. Choose the range of values for the x-axis and the y-axis. Select the minimum and maximum values for both the x-axis and the y-axis.

2. Plot the points on the graph, using the logarithmic formula. Use the formula log(x) = y to calculate the points that should be plotted on the graph. For example, if the x-axis range is from 1 to 10, and the y-axis range is from 0 to 10, then the first point would be (1,0).

3. Connect the points with a smooth curve. Once all the points have been plotted, use a ruler or a graphing calculator to connect them with a smooth curve.

4. Label the axes and add any other details you want to include. Use a ruler or a graphing calculator to label the axes and add any other details you want to include, such as a title, a legend, or a grid.

Learn more about graph here

https://brainly.com/question/17267403

#SPJ4

The beat three options are:  The slope of the line is 1/5, (2) The possible equation if the line is y=1/5x, (3) The slope and the y intercept are the same

Lope is the rate of change of y with respect to x.  slope is also the increase in y over increase in x vice versa

Slope is denoted by rise/run

The Possible solutions from the graph are:

Taking any two points on the graph : (4, 1) and -4, -1,)

We can find the slope as (1--1)/4--4

Therefore, the Slope = 2/3≡1/5

Learn more about slope of a line on https://brainly.com/question/16180119

#SPJ1

The density of the wood is between 0.35 g/cm^3

The density of a substance can be calculated using the formula:

density = mass / volume

To calculate the volume of the cuboid, we can use the formula:

volume = length x width x height

So, using the measurements provided:

volume = 13.2 cm x 16.0 cm x 21.7 cm = 5541.44 cm^3

To calculate the density of the wood, we divide the mass by the volume:

density = 1970 g / 5541.44 cm^3

We can convert cm^3 to g/cm^3 by converting the volume to g

1cm^3 = 1g/cm^3

density = 1970 g / 5541.44 g/cm^3

density = 0.3555 g/cm^3

However, as the measurements provided have a degree of uncertainty, we should consider bounds to find the range of possible densities.

The lower bound for the length is 13.2 cm - 0.1 cm = 13.1 cm

The upper bound for the length is 13.2 cm + 0.1 cm = 13.3 cm

The lower bound for the width is 16.0 cm - 0.1 cm = 15.9 cm

The upper bound for the width is 16.0 cm + 0.1 cm = 16.1 cm

The lower bound for the height is 21.7 cm - 0.1 cm = 21.6 cm

The upper bound for the height is 21.7 cm + 0.1 cm = 21.8 cm

The lower bound for the mass is 1970 g - 5 g = 1965 g

The upper bound for the mass is 1970 g + 5 g = 1975 g

We can now use these bounds to calculate the range of possible densities:

Density lower bound = 1965 g / (13.3 cm x 16.1 cm x 21.8 cm) = 0.350 g/cm^3

Density upper bound = 1975 g / (13.1 cm x 15.9 cm x 21.6 cm) = 0.360 g/cm^3

So the density of the wood is between 0.35 and 0.36 g/cm^3 to one decimal place.

So the density is 0.35 g/cm^3 with an uncertainty of 0.01 g/cm^3

To learn  more about density visit -

brainly.com/question/15164682

#SPJ4

well, what's 230% of $480?

[tex]\begin{array}{|c|ll} \cline{1-1} \textit{\textit{\LARGE a}\% of \textit{\LARGE b}}\\ \cline{1-1} \\ \left( \cfrac{\textit{\LARGE a}}{100} \right)\cdot \textit{\LARGE b} \\\\ \cline{1-1} \end{array}~\hspace{5em}\stackrel{\textit{230\% of 480}}{\left( \cfrac{230}{100} \right)480}\implies \text{\LARGE 1104}[/tex]

You will be calculate the function F(G) = f(g(x)) and G(F) = g(f(x)).

What is function ?

A function is a kind of rule that, for one input, it gives you one output. Image source: by Alex Federspiel. An example of this would be y=x2. If you put in anything for x, you get one output for y. We would say that y is a function of x since x is the input value.

Have given ,

Two functions , f(x) and g(x)

The composition of two functions g and f is the new function we get by performing f first, and then performing g. For example, if we let f be the function given by f(x) = x2 and let g be the function given by g(x) = x + 3, then the composition of g with f is called gf and is worked out as gf(x) = g(f(x)) .

So , You will be calculate the function F(G) = f(g(x)) and G(F) = g(f(x)).

To learn more about function visit : brainly.com/question/12431044

#SPJ4

Answer: 1271

Step-by-step explanation:

620 + (105% × 620) =

620 + 105% × 620 =

(1 + 105%) × 620 =

(100% + 105%) × 620 =

205% × 620 =

205 ÷ 100 × 620 =

205 × 620 ÷ 100 =

127,100 ÷ 100 =

1,271

Solutions refers to the answer to the problem, The example of real solution can be the solution for the value of 'x' in a equation.

In mathematics, a solution refers to a value or set of values that satisfies a given equation, system of equations, or problem. For example, if the equation is x + 2 = 4, then the solution is x = 2, because substituting 2 for x in the equation makes it true. In the case of systems of equations or more complex problems, a solution may be a set of values that satisfies all the equations or conditions of the problem. In such case, the solution may be represented graphically or as coordinates of a point.

In mathematics, an ideal solution refers to a solution that meets all the desired criteria or requirements without any constraints. It is the "best case" scenario. A real solution, on the other hand, refers to a solution that takes into account all the limitations and constraints of a problem. It is a more practical and realistic solution.

example:

x+2=0

x=-2

To learn more about solutions visit:

brainly.com/question/30109489

#SPJ4

Answer:

slope = 2

Step-by-step explanation:

calculate the slope m using the slope formula

m = [tex]\frac{y_{2}-y_{1} }{x_{2}-x_{1} }[/tex]

with (x₁, y₁ ) = (- 1, 0) and (x₂, y₂ ) = (1, 4) ← 2 points on the line

m = [tex]\frac{4-0}{1-(-1)}[/tex] = [tex]\frac{4}{1+1}[/tex] = [tex]\frac{4}{2}[/tex] = 2

Answer: The slope is 2.

Step-by-step explanation: To find the slope of a line, we first need to pick two points on a line. To solve this, I picked points (-2, -2) and (1, 4). The slope is rise over run, so you need to find the rise and run and divide.

We need to go 6 spaces up from (-2, -2) to get to (1, 4). This is our rise. Then, we go 3 spaces to the right. That is our run. 6 / 3 is 2, so that's your slope. Notice that if you cannot divide the rise and run into a whole number, keep it as a fraction instead.

Let me know if this is right! :)

Answer: i need your help, XD

Step-by-step explanation:

by splanation, in be clearly what he taking about. the hamburger, usually. is 1/4 p.1/2 p. in triple hamburger on 4 by 4

The number of used hamburgers that is 80% lean is = 500

and the number of used hamburgers that is 88% lean is = 300.

Let the number of hamburger that is 80% lean be = x.

So the number of hamburger that is 88% lean is = 800 - x

According to question after the mixing all these the total percentage of lean in 800 ponds of burgers is 83%.

So, the suitable mathematical equation is,

80% of x + 88% of (800 - x) = 83% of 800

(80/100) x + (88/100) * (800 - x) = (83/100) * 800

80x + 88 (800 - x) = 83 * 800 [Multiplying 1000 with both sides]

80x + 88 * 800 - 88x = 83 * 800

88x - 80x = 88 * 800 - 83 * 800 = 800 (88 - 83) = 5 * 800

8x = 800 * 5

x = (800 * 5)/8 = 100 * 5 = 500

Hence the number of hamburger with 80% lean is 500 and the number of hamburger with 88% lean is = (800 - 500) = 300.

To know more about percentage here

https://brainly.com/question/32848105

#SPJ2

Answer:

Blue:  y = x²

Red:  y = -x² + 18

Step-by-step explanation:

The blue parabola opens upwards, therefore the term in x² is positive.

The red parabola opens downwards, therefore the term in x² is negative.

The x-value of the vertices of both parabolas is x = 0.

Therefore, the equations of both parabolas will not have a term in x.

The y-intercept of the blue parabola is also the y-value its vertex: y = 0.

The y-intercept of the red parabola is also the y-value its vertex: y = 18.

Therefore, the equation for each parabola is:

To check, substitute x = ±3 into both equations:

Blue

[tex]x=3 \implies y=(3)^2=9[/tex]

[tex]x=-3 \implies y=(-3)^2=9[/tex]

Red

[tex]x=3 \implies y=-(3)^2+18=9[/tex]

[tex]x=-3 \implies y=-(-3)^2+18=9[/tex]

Answer:

y = x2

y = –x2 +18

Step-by-step explanation:

I got it right on the test.

The probability that the mean thickness in these 16 measurements x is farther than 3 units away from the target value is 0.15 + 0.15 = 0.30 which corresponds to the answer B) 0.32.

What is the Central Limit Theorem?

The central limit theorem states that if you have a population with mean μ and standard deviation σ and take sufficiently large random samples from the population with replacement, then the distribution of the sample means will be approximately normally distributed.

We can use the Central Limit Theorem to determine that the sampling distribution of the mean thickness of a random sample of size 17 from a population with a mean of 200 units and a standard deviation of 12 units will be approximately normal with a mean of 200 units and a standard deviation of (12 units)/√17 = 2.8 units.

Given that the mean thickness in these 17 measurements x is farther than 3 units away from the target value, we can use the standard normal table to find the probability.

Let's call X = mean thickness,

if X > 203, we have P(X>203) = P(Z> (203-200)/2.8) = P(Z>1.071) = 0.15

if X < 197, we have P(X<197) = P(Z< (197-200)/2.8) = P(Z<-1.071) = 0.15

Hence, the probability that the mean thickness in these 16 measurements x is farther than 3 units away from the target value is 0.15 + 0.15 = 0.30 which corresponds to the answer B) 0.32.

To learn more about the Central Limit Theorem visit,

https://brainly.com/question/18403552

#SPJ4

The  set of equations correctly representing x are as follows:

(x + 1/2) and (x = 7/2).

A set or group of equations that you solve all at once is referred to as a "system" of equations. The simplest linear system is one that has two equations as well as two variables. Linear equations (those that graph as straight lines) are easier to understand than non-linear ones.

Systems of equations in mathematics are a collection of relationships between different unknown variables that can be stated in terms of algebraic expressions. They are also known as simultaneous equations. Graphing, substitution, as well as elimination by addition, are methods that can be used to find the solutions to a basic system of equations.

Sum means addition (+).

Given that sum of a number, x and 1/2 is 4.

This means the adding  two numbers

x+1/2=4

Now make x the subject of formula,

x=4-1/2

Finding the L.C.M  = 8-1/2

                        x=7/2

                     ∴ x=3 1/2

To learn more about set of equations, visit:

brainly.com/question/25976025

#SPJ1

Answer:

7

Step-by-step explanation:

Answer:

1.Solve one of the equations for either variable.

2.Substitute the expression from Step 1 into the other equation.

3.Solve the resulting equation.

4.Substitute the solution in Step 3 into one of the original equations to find the other variable.

5.Write the solution as an ordered pair.

6.Check that the ordered pair is a solution to both original equations.

Step-by-step explanation:

The given two functions are said to be equal functions if and only if both it's domain and range are equal.

In mathematics we use functions to show the relation between two objects.

They are used in various aspects of real life. The domain of a function is known as all the possible input values which can be given to the function.

The range of the function is the set of all the possible outputs which can be obtained from a function. We also have co-domain of a function which can be defined as the set of outputs for a relation or function , it can be equal to the range.

To learn more about  functions

brainly.com/question/29756953

#SPJ4

Answer:

Step-by-step explanation:

because HA⊥HR, HR⊥DR, so HA ║ DR, then we know ∠DHR=∠ARH,

we konw, AR=HD, They have a common segment HR, as well as the same angle，so HRA≅RHD

Answer: 4y (4y^2-2y-5)

Step-by-step explanation:

The formula for an isosceles triangle is A = (1/2) * b * h, where b is the base, h is the height, and A is the area.

The formula for an isosceles triangle is A = (1/2) * b * h. This formula is used to calculate the area of an isosceles triangle. To use the formula, you need to know the base, b, and the height, h, of the triangle. The base is the length of any one of the two equal sides of the isosceles triangle, and the height is the distance from the base to the opposite vertex. Once you have these measurements, you can plug them into the formula to calculate the area of the triangle. The formula multiplies the base, b, by the height, h, and then divides the product by two. This will give you the area of the triangle, A.

Learn more about isosceles triangle here

https://brainly.com/question/2456591

#SPJ4

Answer:(-2,-2)

Step-by-step explanation:

The radical has a value of 0 when x = -2. At that point, the function value is ...

 f(-2) = √(-(-2)-2) -2 = √(0) -2

 f(-2) = -2

The length of the hypotenuse will be 5√2 = 7.07

The triangle specified in the question is right-angled, one angle is mentioned to be 90°. It is also an isosceles triangle since both other angles are equal. if both angles are equal, both sides will also be equal.

So the length of both equal sides = 5 cm

Pythagoras' theorem tells us about the relationship between the three sides of a right-angled triangle. It states that the square of the hypotenuse of the right-angled triangle will be equal to the sum of squares of the other two sides. If a, b, and c are the sides

 c² = a²+ b²

  c = √(a²+b²)

According to Pythagoras' theorem, Hypotenuse = √base²+ alt²

                                                          Hypotenuse = √5²+5²

                                                                                = 5√2

                                                                               = 7.07 cm

So the length of the hypotenuse is 5√2 = 7.07 cm.

For more information about the Pythagoras theorem, kindly refer

https://brainly.com/question/12919358

#SPJ4

The total number of terms which are in the polynomial  expression  –2p³ – 3p² + 4p + 7 is 4 terms.

A polynomial expression is made up of multiple terms joined either by addition , subtraction or multiplication or division.

The given expression is

–2p³ – 3p² + 4p + 7

If we will break them down in simpler terms we will get ,

–2p³, – 3p², + 4p, + 7

Therefore, number of terms are found to be  4

The terms of an algebraic expression are referred to as the the components of that expression . An algebraic expression can have one or more terms.

To learn more about polynomials

brainly.com/question/11536910

#SPJ4