Peanut allergies are becoming increasingly common in Western countries. Some evidence points to the timing of peanuts' first introduction in the diet as an influential factor, raising the question of whether pediatricians should recommend early exposure or avoidance. A study enrolled infants with a diagnosed peanut allergy and randomly assigned them to either completely avoid peanuts or consume peanuts in small amounts regularly until they reached 60 months of age. At the end of the study, 18 of the 51 infants who had avoided peanuts were still allergic to peanuts. In contrast, five of the 47 infants who had consumed peanuts were still allergic to peanuts.

(a) What are the two variables described? (Select two options. ) peanut allergy at 60 months of age (yes or no year the study began peanut consumption (avoid or consume small amounts) percentage of peanuts in diet choice of diaper for infants current age in months

(b) Give the marginal distribution of peanut allergy at 60 months of age, both as counts and as percentages. (Enter your answers rounded to one decimal place. ) marginal distribution (with peanut allergy, count): marginal distribution (with peanut allergy, percent): marginal distribution (no peanut allergy, count): marginal distribution (no peanut allergy, percent):

Answers

Answer 1

The marginal distribution of peanut allergy at 60 months of age is: With peanut allergy: 23 (23.7%) Without peanut allergy: 75 (76.3%)

(a) The two variables described are:

Peanut allergy at 60 months of age (yes or no)

Year the study began peanut consumption (avoid or consume small amounts)

(b) The marginal distribution of peanut allergy at 60 months of age, both as counts and percentages, can be calculated as follows:

Marginal distribution (with peanut allergy, count):

Number of infants still allergic to peanuts at 60 months of age = 18 + 5 = 23

Marginal distribution (with peanut allergy, percent):

Percentage of infants still allergic to peanuts at 60 months of age = (18 + 5) / (51 + 47) * 100% = 23.7%

Marginal distribution (no peanut allergy, count):

Number of infants not allergic to peanuts at 60 months of age = 51 + 47 - 23 = 75

Marginal distribution (no peanut allergy, percent):

Percentage of infants not allergic to peanuts at 60 months of age = 75 / (51 + 47) * 100% = 76.3%

Learn more about variables at: brainly.com/question/15078630

#SPJ11


Related Questions

.7. Let A be the matrix A =
4 −1
2 1
(a) Diagonalize the matrix A. That is, find an invertible matrix P and a diagonal matrix D such that P −1AP = D (b) Find P −1 . (c) Use the factorization A = P DP −1 to compute A5 .

Answers

(a) To diagonalize the matrix A, we need to find its eigenvalues and eigenvectors. The characteristic polynomial of A is given by:

det(A - λI) = |(4-λ) -1|

| 2 (1-λ)|

scss

Copy code

        = (4 - λ)(1 - λ) + 2 = λ² - 5λ + 6 = (λ - 2)(λ - 3)

Therefore, the eigenvalues of A are λ₁ = 2 and λ₂ = 3.

To find the eigenvectors corresponding to each eigenvalue, we solve the equations:

(A - λ₁I)x₁ = 0, and (A - λ₂I)x₂ = 0

For λ₁ = 2, we have:

(A - 2I)x₁ = 0

⇒ (2 - 2)x₁ - (-1)x₂ = 0

⇒ x₁ + x₂ = 0

So, one eigenvector corresponding to λ₁ = 2 is v₁ = ⟨1, -1⟩.

For λ₂ = 3, we have:

(A - 3I)x₂ = 0

⇒ (4-3)x₁ - (-1)x₂ = 0

⇒ x₁ + x₂ = 0

So, another eigenvector corresponding to λ₂ = 3 is v₂ = ⟨1, -1⟩.

Therefore, the matrix A can be diagonalized as:

A = PDP⁻¹, where

P = |1 1|, and D = |2 0|

|0 1| |0 3|

(b) To find P⁻¹, we need to find the inverse of P. We have:

|1 1|⁻¹ = 1/(11 - 11) | 1 -1| = 1/(-1)|-1 1| = |-1 1|

|0 1| | 0 1| | 0 1|

Therefore, P⁻¹ = |-1 1|

| 0 1|

(c) Using the factorization A = PDP⁻¹, we have:

A⁵ = (PDP⁻¹)⁵ = PD⁵P⁻¹

Since D is a diagonal matrix, we can easily compute its fifth power as:

D⁵ = |(2)⁵ 0| = |32 0|

| 0 (3)⁵| | 0 243|

So, A⁵ = PDP⁻¹ = |1 1| |32 0| |-1 1| = |-32 32|

|0 1| |0 243| | 0 1|

Therefore, A⁵ = |-32 32|

| 0 243|.

To know more about Eigenvectors:

https://brainly.com/question/15586347

#SPJ11

Question 1


9 pts


The Land rover LX depreciates at a rate of 11% each year. If


the car is worth $47,450 this year, what will the value be in


9yrs?


$21,825. 44


$19,387. 93


$16,624. 41


$121. 378. 85


Next >

Answers

The value of the Land Rover LX will be approximately $16,624.41 in 9 years, considering a depreciation rate of 11% each year.

To find the value of the Land Rover LX after 9 years, we need to calculate the depreciation for each year. The car depreciates at a rate of 11% each year.

We can calculate the value in each year by multiplying the previous year's value by (1 - 0.11) or 0.89 (100% - 11%).

Starting with the initial value of $47,450, we can calculate the value in each subsequent year as follows:

Year 1: $47,450 * 0.89 = $42,190.50

Year 2: $42,190.50 * 0.89 = $37,548.45

Year 9: $16,624.41 * 0.89 = $14,793.02

Therefore, the value of the Land Rover LX in 9 years will be approximately $16,624.41. Option C, $16,624.41, matches this calculated value and is the correct answer.

Learn more about depreciation here:

https://brainly.com/question/30492183

#SPJ11

Find the line integral of f(x,y,z)=x+y+z over the straight line segment from (1,2,3) to (0,−1,1)

Answers

Answer: The line integral of F along the straight line segment from (1, 2, 3) to (0, -1, 1) is 6.5.

Step-by-step explanation:

To determine the line integral of a vector function F along a curve C, we first parameterise the curve with a vector function r(t), where a ≤ t ≤ b. Then, we compute the line integral as follows:

∫CF · dr = ∫b_ar(t) · r'(t) dt

where F = (f_1, f_2, f_3) and r'(t) = (dx/dt, dy/dt, dz/dt).

In this problem, we are given the vector function F(x, y, z) = (x + y + z). We need to find the line integral of F along the straight line segment from (1, 2, 3) to (0, -1, 1). We can parameterize this line segment by setting:

r(t) = (1, 2, 3) + t ((0, -1, 1) - (1, 2, 3)) = (1 - t, 2 - t, 3 + t), where 0 ≤ t ≤ 1.

Thus, r'(t) = (-1, -1, 1), and F(r(t)) = (1 - t) + (2 - t) + (3 + t) = 6 - t.

Substituting these values into the formula for the line integral, we get:

∫CF · dr = ∫1_0 F(r(t)) · r'(t) dt

= ∫1_0 (6 - t) · (-1, -1, 1) dt

= ∫1_0 (-6 + t) dt

= [-6t + (t^2)/2]_1^0

= 6 - 0 - (-6 + 1/2)

= 6.5.

Therefore, the line integral of F along the straight line segment from (1, 2, 3) to (0, -1, 1) is 6.5.

Learn more about line integral here, https://brainly.com/question/30460707

#SPJ11

Write a number with one decimal place, that is bigger than 5 1/3 but smaller than 5. 5

Answers

The number that is bigger than 5 1/3 but smaller than 5.5 and has one decimal place is 5.4.

To find a number that is bigger than 5 1/3 but smaller than 5.5, we need to consider the values in between these two numbers. 5 1/3 can be expressed as a decimal as 5.33, and 5.5 is already in decimal form.

We are looking for a number between these two values with one decimal place.

Since 5.4 falls between 5.33 and 5.5, and it has one decimal place, it satisfies the given conditions.

The digit after the decimal point in 5.4 represents tenths, making it a number with one decimal place.

Therefore, the number 5.4 is bigger than 5 1/3 but smaller than 5.5 and fulfills the requirement of having one decimal place.

Learn more about decimal form here:

https://brainly.com/question/20699628

#SPJ11

A stone is tossed into the air from ground level with an initial velocity of 39 m/s.
Its height at time t is h(t) = 39t − 4.9t^2 m/s. Compute the stone's average velocity over the time intervals

[1, 1.01], [1, 1.001], [1, 1.0001],

and

[0.99, 1], [0.999, 1], [0.9999, 1].

Estimate the instantaneous velocity v at t = 1.

Answers

The instantaneous velocity of the stone at t = 1 is 29.2 m/s.

Given data:

A stone is tossed into the air from ground level with an initial velocity of 39 m/s. Its height at time t is h(t) = 39t − 4.9t² m/s. The required parameters are as follows:

Compute the stone's average velocity over the time intervals [1, 1.01], [1, 1.001], [1, 1.0001],

and [0.99, 1], [0.999, 1], [0.9999, 1].

Estimate the instantaneous velocity v at t = 1.

Solution:

Average velocity = (total distance) / (total time)

In general, distance is the change in the position of an object; as a result, total distance = [h(t2) − h(t1)],

and total time = [t2 − t1].

Using the formula of h(t),

h(t2) = 39t2 − 4.9t²

h(t1) = 39t1 − 4.9t²

Let's evaluate the average velocity over the time intervals using this formula:

[1, 1.01][h(1.01) - h(1)] / [1.01 - 1] = [39(1.01) - 4.9(1.01)² - 39(1) + 4.9(1)²] / [0.01][1, 1.001][h(1.001) - h(1)] / [1.001 - 1]

= [39(1.001) - 4.9(1.001)² - 39(1) + 4.9(1)²] / [0.001][1, 1.0001][h(1.0001) - h(1)] / [1.0001 - 1]

= [39(1.0001) - 4.9(1.0001)² - 39(1) + 4.9(1)²] / [0.0001][0.99, 1][h(1) - h(0.99)] / [1 - 0.99]

= [39(1) - 4.9(1)² - 39(0.99) + 4.9(0.99)²] / [0.01][0.999, 1][h(1) - h(0.999)] / [1 - 0.999]

= [39(1) - 4.9(1)² - 39(0.999) + 4.9(0.999)²] / [0.001][0.9999, 1][h(1) - h(0.9999)] / [1 - 0.9999]

= [39(1) - 4.9(1)² - 39(0.9999) + 4.9(0.9999)²] / [0.0001]

Evaluate the above fractions and obtain the values of average velocity over the given time intervals.

Using the derivative of h(t), we can estimate the instantaneous velocity at t = 1.

Using the formula of v(t), v(t) = h'(t)At t = 1, h'(t) = 39 - 9.8(1) = 29.2 m/s

Thus, the instantaneous velocity of the stone at t = 1 is 29.2 m/s.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ11

list three problems that have polynomial-time algorithms. justify your answer.

Answers

Polynomial-time algorithm are: Sorting, Shortest path and maximum flow.

1. Sorting: Sorting involves arranging a list of elements in ascending or descending order. While there are many sorting algorithms, some of them are known to have a polynomial-time complexity. For example, the quicksort algorithm has an average-case complexity of O(n log n), making it a polynomial-time algorithm.

2. Shortest path: Given a graph with weighted edges, the shortest path problem involves finding the path between two vertices with the smallest total weight. The Dijkstra's algorithm is a polynomial-time algorithm that solves this problem efficiently.

3. Maximum flow: Given a network with nodes and edges, the maximum flow problem involves finding the maximum amount of flow that can be transported from a source node to a sink node. The Ford-Fulkerson algorithm is a polynomial-time algorithm that solves this problem efficiently.

All of these problems have polynomial-time algorithm because the time taken to solve them is proportional to a polynomial function of the input size. This means that as the size of the input increases, the time taken to solve the problem grows at a relatively slow rate, making these algorithms efficient.


Learn more about polynomial-time algorithm here:

https://brainly.com/question/31804504


#SPJ11

Let AI = {i, i2} for all integers i = 1, 2, 3, 4.
a. A1 ∪ A2 ∪ A3 ∪ A4 =?
b. A1 ∩ A2 ∩ A3 ∩ A4 =?
c. Are A1, A2, A3, and A4 mutually disjoint? Explain.

Answers

a. AI = {1, 2, 3, 4, 1^2, 2^2, 3^2, 4^2} = {1, 2, 3, 4, 1, 4, 9, 16} = {1, 2, 3, 4, 9, 16}

b. A1 ∩ A2 ∩ A3 ∩ A4 = {1^2, 2^2, 3^2, 4^2} = {1, 4, 9, 16}

c. A1, A2, A3, and A4 are not mutually disjoint as they share common elements.

a. The set AI contains the integers 1, 2, 3, and 4, along with their squares. So we have AI = {1, 2, 3, 4, 1^2, 2^2, 3^2, 4^2}. Simplifying this expression gives us AI = {1, 2, 3, 4, 1, 4, 9, 16}, which can be further simplified to AI = {1, 2, 3, 4, 9, 16}.

b. The intersection of A1, A2, A3, and A4 is the set of integers that are present in all of these sets. Since A1 = {1, 1^2}, A2 = {2, 2^2}, A3 = {3, 3^2}, and A4 = {4, 4^2}, the intersection of these sets is {1^2, 2^2, 3^2, 4^2}. Simplifying this expression gives us A1 ∩ A2 ∩ A3 ∩ A4 = {1, 4, 9, 16}.

c. A1, A2, A3, and A4 are not mutually disjoint since they share common elements. For example, A1 and A2 both contain the integer 1, while A3 and A4 both contain the integer 4. Therefore, we can say that these sets are not mutually disjoint.

For more questions like Integer click the link below:

https://brainly.com/question/490943

#SPJ11

find the derivative of the function. g ( x ) = ∫ 4 x 2 x u 2 − 5 u 2 5 d u [ hint: ∫ 4 x 2 x f ( u ) d u = ∫ 0 2 x f ( u ) d u ∫ 4 x 0 f ( u ) d u ]

Answers

The derivative of the function g(x) is g'(x) = 28x².

The derivative of the function g(x) can use the Fundamental of Calculus states that if f(x) is continuous on [a, b] then:

∫aˣ f(t) dt is differentiable on (a, b) and its derivative is f(x)

Integral with respect to x by differentiating the integrand with respect to u and then multiplying by the derivative of the upper limit of integration.

We can simplify the given integral using the provided hint:

g(x) = ∫4x²x (u² - 5u²/5)/5 du

g(x) = ∫0²x (u² - 5u²/5)/5 du - ∫0⁴x (u² - 5u²/5)/5 du

The first term on the right-hand side can be integrated as:

∫0²x (u² - 5u²/5)/5 du

= ∫0²x (u²/5 - u²) du

= [tex][(u^3/15) - (u^3/3)]_0^2x[/tex]

= (8x³/15) - (8x³/3)

= -4x³/3

The second term on the right-hand side can be integrated as:

∫0⁴x (u² - 5u²/5)/5 du

= ∫0⁴x (u²/5 - u²) du

=[tex][(u^3/15) - (u^3/3)]_0^4x[/tex]

= (64x³/15) - (64x³/3)

= -32x³

g(x) = -4x³/3 - (-32x³)

= 28x^³/3.

Now, we can differentiate g(x) with respect to x using the power rule:

g'(x) = d/dx [28x³/3]

= 28x²

For similar questions on derivative

https://brainly.com/question/28376218

#SPJ11

Consider each of the statements below. For each statement, decide whether it is sometimes, always, or never a true statement. 1. A hypothesis test that produces a p-value < 0.001 will produce an effect size d > 0.8 2. In order to compute Cohen's d, a statistician must directly know the sample size. 3. If a right-tailed hypothesis test produces a negative test statistic, the associated p-value will be larger than 0.50. 4. A hypothesis test of a single population mean that produces a t-test statistic t = 0 will produce an effect size d = 0. 5. In a hypothesis test, the direction of the alternative hypothesis (right-tailed, left-tailed, or two-tailed) affects the way the p-value is computed. Uoln Centering A

Answers

Sometimes true - The p-value and effect size are related but different statistical measures. It is possible to have a very small p-value but a small effect size, depending on the sample size and variability of the data.

Never true - Cohen's d is calculated using the mean difference between two groups and the pooled standard deviation. While the sample size can affect the standard deviation, it is not the only factor that determines it. Therefore, the sample size alone is not enough to compute Cohen's d.

Never true - The sign of the test statistic does not determine the direction of the hypothesis test. The p-value is calculated based on the distribution of the test statistic under the null hypothesis and represents the probability of obtaining a test statistic as extreme or more extreme than the observed one, assuming the null hypothesis is true.

Always true - Cohen's d is calculated as the difference between the sample mean and the null hypothesis mean, divided by the sample standard deviation. When the sample mean equals the null hypothesis mean, the effect size is zero.

Sometimes true - The direction of the alternative hypothesis affects the way the p-value is computed only in one-tailed tests. In two-tailed tests, the p-value is calculated as the probability of obtaining a test statistic as extreme or more extreme than the observed one, in either direction.

Learn more about statistical here

https://brainly.com/question/12150562

#SPJ11

HCSS has a goal to answer all technical support calls by the third ring, or within 21 seconds. If on Monday we answered 500 calls before noon with an average answer time of 16 seconds, 350 calls from noon to 6pm in an average of 14 seconds, and 150 calls on Monday night with an average time of 20 seconds, what was our average answer time for the entire day on Monday

Answers

The average answer time for the entire day on Monday was 15.9 seconds.

For the average answer time for the entire day on Monday, we need to calculate the total time spent answering calls and divide by the total number of calls answered.

Let's first calculate the total time spent answering calls:

- For the 500 calls before noon, the total time spent answering calls is: 500 x 16 = 8,000 seconds

- For the 350 calls from noon to 6pm, the total time spent answering calls is: 350 x 14 = 4,900 seconds

- For the 150 calls on Monday night, the total time spent answering calls is: 150 x 20 = 3,000 seconds

So the total time spent answering calls on Monday is:

8,000 + 4,900 + 3,000 = 15,900 seconds

Now, let's calculate the total number of calls answered:

500 + 350 + 150 = 1,000 calls

Finally, we can calculate the average answer time for the entire day on Monday:

Average answer time = Total time spent answering calls / Total number of calls answered

= 15,900 / 1,000

= 15.9 seconds

Therefore, the average answer time for the entire day on Monday was 15.9 seconds.

To know more about averages refer here :

https://brainly.com/question/31337778#

#SPJ11

Paulina decidió ahorrar dinero con el fin de comprarle un regalo a su papá por su




cumpleaños. Inició su ahorro un día lunes, y guardó 3 pesos. A partir del siguiente día,




martes, empezó a guardar 5 pesos diarios.




a) ¿Qué cantidad tendrá ahorrada Paulina el jueves?




b) ¿Cuánto dinero tendrá en el primer domingo?




c) ¿Cuánto tendrá ahorrado el domingo de la cuarta semana?

Answers

Paulina will have 33 pesos saved on the Sunday of the fourth week.

The given problem is in Spanish language and it states that Paulina decided to save money to buy her dad a birthday present. She started saving on Monday and saved 3 pesos. From the following day, Tuesday, she started saving 5 pesos daily. We have to determine how much money Paulina will have saved on Thursday, the first Sunday, and the Sunday of the fourth week

Solution:

a) On Tuesday, she saves 5 pesos. Therefore, the total savings on Tuesday becomes 5 + 3 = 8 pesos .On Wednesday, she saves 5 pesos again. Therefore, the total savings on Wednesday becomes 5 + 8 = 13 pesos. On Thursday, she saves 5 pesos again. Therefore, the total savings on Thursday becomes 5 + 13 = 18 pesos. Hence, Paulina will have 18 pesos saved on Thursday.

b) Paulina has been saving 5 pesos per day from Tuesday. Since Tuesday, there have been six days, including Sunday. Therefore, Paulina will have saved 3 + (5 × 6) = 33 pesos on the first Sunday.

c) There are 28 days in February, so the Sunday of the fourth week will be the 28th day.  Monday, she saves 3 pesos. On Tuesday, she saves 5 pesos. On Wednesday, she saves 5 pesos. On Thursday, she saves 5 pesos. On Friday, she saves 5 pesos. On Saturday, she saves 5 pesos. On Sunday, she saves 5 pesos. Now, let us add up the savings:3 + 5 + 5 + 5 + 5 + 5 + 5 = 33 pesos.

Know more about savings here:

https://brainly.com/question/29274076

#SPJ11

determine the standard matrix a for the linear tranformation which first roates points thorugh pi/4 clockwise and then reflects points through vertical x2 axis

Answers

The standard matrix A for the given linear transformation is:

[tex]A = [\sqrt{ (2)/2 } cos(pi/4) sin(pi/4)]\\ [-\sqrt{(2)/2 } -sin(pi/4) cos(pi/4)][/tex]

To determine the standard matrix A for the given linear transformation, we need to find out how the transformation changes the standard basis vectors.

Let's start by considering the standard basis vectors in R2:

e1 = (1, 0)

e2 = (0, 1)

Rotation by pi/4 clockwise:

To rotate a vector by pi/4 clockwise, we need to multiply the vector by the matrix:

R = [cos(-pi/4)  -sin(-pi/4)]

   [sin(-pi/4)   cos(-pi/4)]

which simplifies to:

R = [cos(pi/4)  sin(pi/4)]

   [-sin(pi/4) cos(pi/4)]

Applying this to e1 and e2 gives:

[tex]Re1 = [cos(pi/4) sin(pi/4)] \times [1] = [\sqrt{(2)/2} ]\\ [-sin(pi/4) cos(pi/4)] [0] [\sqrt{(2)/2}]\\Re2 = [cos(pi/4) sin(pi/4)] \times [0] = [-\sqrt{(2)/2}]\\ [-sin(pi/4) cos(pi/4)] [1] [\sqrt{(2)/2}][/tex]

Reflection through the x2-axis:

To reflect a vector through the x2-axis, we simply negate its second component. Therefore, the matrix that represents this transformation is:

F = [1 0]

   [0 -1]

Applying this to Re1 and Re2 gives:

[tex]Fe1 = [1 0] \times [\sqrt{(2)/2} ] = [\sqrt{(2)/2}]\\ [0 -1] [\sqrt{(2)/2}] [-\sqrt{(2)/2}]\\Fe2 = [1 0] \times [-\sqrt{(2)/2}] = [-\sqrt{(2)/2}]\\ [0 -1] [\sqrt{(2)/2}] [-\sqrt{(2)/2}][/tex]

Now we can combine the two transformations by multiplying the matrices R and F:

[tex]A = FR = [1 0] \times [cos(pi/4) sin(pi/4)] = [sqrt(2)/2] [cos(pi/4) sin(pi/4)] [0 -1] [-sin(pi/4) cos(pi/4)] [-\sqrt{(2)/2} ][-sin(pi/4) cos(pi/4)][/tex]

for such more question on  standard matrix

https://brainly.com/question/475676

#SPJ11

the rate of change of a population () is proportional to both the population and the difference between a population maximum and the population

Answers

You can determine the rate of change of a population based on its current size and the difference between its maximum size and its current size.

Population growth involving the rate of change, population maximum, and the difference between the maximum and the population.

The rate of change of a population (dP/dt) is proportional to both the population (P) and the difference between a population maximum (K) and the population (K-P). This can be represented by the following equation:

dP/dt = r * P * (K - P)

Here, r is the proportionality constant, which represents the growth rate of the population.

To solve a problem using this equation, follow these steps:

1. Identify the given values for P, K, and r.
2. Substitute the given values into the equation.
3. Solve the equation for dP/dt, which represents the rate of change of the population.

By following these steps, you can determine the rate of change of a population based on its current size and the difference between its maximum size and its current size.

To learn more about rate of change

https://brainly.com/question/17214872

#SPJ11

What animal do the bluths poorly impersonate on ""arrested development""?

Answers

On "Arrested Development", the Bluth family poorly impersonates the chicken. In the TV show "Arrested Development," the Bluth family struggles to maintain their status and reputation as a wealthy family, as they face financial problems and legal troubles. One of their ways of coping is to create various schemes to regain their fortune.

In one particular episode, they decide to promote their family's frozen banana stand, and George-Michael and Maeby promote it by performing the "Chicken Dance." The Bluth family members then decide to impersonate chickens themselves to add to the spectacle. The rest of the family joins in, with some members doing better impressions than others, but all being pretty terrible.

The Bluths' bad chicken impressions are just one example of the show's trademark absurd humor, which often revolves around the characters' ineptitude and inability to get anything right.

Overall, Arrested Development is a satirical TV show that makes use of absurd humor to explore the lives of a dysfunctional wealthy family who struggle to maintain their wealth and status.

To know more about Financial  visit :

https://brainly.com/question/31955701

#SPJ11

A random sample of size 5 is taken from a normal distribution with mean 0 and standard deviation 2. Find a constant C such that 0.05 is equal to the probability that the sum of the squares of the sample observations exceeds C.

Answers

The constant C = 44.28 is the constant such that the probability that the sum of the squares of the sample observations exceeds C is 0.05.

To solve this problem, we need to use the Chi-Square distribution. The sum of squares of a sample of size n from a normal distribution with mean μ and standard deviation σ is distributed according to the Chi-Square distribution with n degrees of freedom (df). In this case, n = 5 and σ = 2.
The probability that the sum of squares of the sample observations exceeds C can be calculated using the Chi-Square distribution function. We want to find the value of C such that the probability of exceeding C is 0.05.
Using a Chi-Square table or calculator, we can find that the 0.05 quantile of the Chi-Square distribution with 5 df is 11.07. This means that the probability of observing a sum of squares greater than 11.07 is 0.05.
To find C, we set the sum of squares equal to 11.07 and solve for C:
x1^2 + x2^2 + x3^2 + x4^2 + x5^2 = 11.07
Since the sample mean is 0, we can assume that the sample deviations are symmetric around 0. Thus, we can solve for C using only one deviation:
x1^2 = (C/n) - x2^2 - x3^2 - x4^2 - x5^2
Substituting x1^2 into the equation for the sum of squares, we get:
(C/n) = x2^2 + x3^2 + x4^2 + x5^2 + (C/n)
Simplifying, we get:
C = 4(x2^2 + x3^2 + x4^2 + x5^2)
Now we can substitute 11.07 for the sum of squares and solve for C:
C = 4(11.07)
C = 44.28
Therefore, C = 44.28 is the constant such that the probability that the sum of the squares of the sample observations exceeds C is 0.05.

To know more about probability visit :

https://brainly.com/question/29221515

#SPJ11

A population of a town is divided into three age classes: less than or equal to 20 years old, between 20 and 40 years old, and greater than 40 years old. After each period of 20 years, there are 80 % people of the first age class still alive, 73 % people of the second age class still alive and 54 % people of the third age Hare still alive. The average birth rate of people in the first age class during this period is 1. 45 (i. E. , each person in the first age class, on average, give birth to about 1. 45 babies during this period); the birth rate for the second age class is 1. 46, and for the third age class is 0. 59, respectively. Suppose that the town, at the present, has 10932, 11087, 14878 people in the three age classes, respectively

Answers

The question pertains to a population of a town, which is divided into three age classes: people less than or equal to 20 years old, people between 20 and 40 years old, and people over 40 years old.

After each period of 20 years, there are 80% people of the first age class still alive, 73% people of the second age class still alive, and 54% people of the third age still alive. The average birth rate of people in the first age class during this period is 1.45; for the second age class is 1.46, and for the third age class is 0.59.

At present, the town has 10,932, 11,087, and 14,878 people in the three age classes, respectively.  Let's start by calculating the number of people in each age class, after the next 20 years.For the first age class: the population will increase by 1.45 × 0.80 = 1.16 times. Therefore, there will be 1.16 × 10,932 = 12,676 people.For the second age class: the population will increase by 1.46 × 0.73 = 1.0658 times. Therefore, there will be 1.0658 × 11,087 = 11,824 people.For the third age class: the population will increase by 0.59 × 0.54 = 0.3186 times. Therefore, there will be 0.3186 × 14,878 = 4,742 people.After 40 years, we have to repeat this process, but now we have to start with the populations that we have just calculated. This is summarized in the following table:Age class Initial population in 2020 Population in 2040 Population in 2060 Population in 2080 Less than or equal to 20 years old 10,932 12,676 14,684 17,019 Between 20 and 40 years old 11,087 11,824 12,609 13,453 Greater than 40 years old 14,878 4,742 1,509 480We know that the number of people in each age class in 2080 is equal to the sum of people in the same age class in 2040 (that we just calculated) and the number of people that survived from the previous 20 years. Therefore, we can complete the table as follows:Age class Population in 2080 Number of people alive after 20 years alive after 40 years alive after 60 years Less than or equal to 20 years old 17,019 12,676 9,348 6,886 Between 20 and 40 years old 13,453 11,824 10,510 9,341 Greater than 40 years old 480 1,509 790 428Now, we can easily calculate the population in the town after each 20 years. In particular, after 20 years, we will have:10,932 + 1.16 × 10,932 + 1.0658 × 11,087 + 0.3186 × 14,878 = 10,932 + 12,540.72 + 11,822.24 + 4,740.59 = 39,036After 40 years, we will have:17,019 + 12,676 + 10,510 + 790 = 41,995After 60 years, we will have:6,886 + 9,341 + 428 = 16,655Therefore, the town's population will increase from 10,932 to 39,036 in the next 20 years, then to 41,995 in the following 20 years, and then to 16,655 in the final 20 years.

Know more about divided into three age classes here:

https://brainly.com/question/27031218

#SPJ11

If the Gram-Schmidt process �s applied to determine the QR factorization of A. then. after the first two orthonormal vectors q1 and q2 are computed. we have: Finish the process: determine q3 and fill in the third column of Q and R.

Answers

You've completed the Gram-Schmidt process for QR factorization and filled in the third column of matrices Q and R: R(1,3) = a3 · q1, R(2,3) = a3 · q2, R(3,3) = a3 · q3

Given that you already have the first two orthonormal vectors q1 and q2, let's proceed with determining q3 and completing the third column of matrices Q and R.

Step 1: Calculate the projection of the original third column vector, a3, onto q1 and q2.
proj_q1(a3) = (a3 · q1) * q1
proj_q2(a3) = (a3 · q2) * q2

Step 2: Subtract the projections from the original vector a3 to obtain an orthogonal vector, v3.
[tex]v3 = a3 - proj_q1(a3) - proj_q2(a3)[/tex]

Step 3: Normalize the orthogonal vector v3 to obtain the orthonormal vector q3.
q3 = v3 / ||v3||

Now, let's fill in the third column of the Q and R matrices:

Step 4: The third column of Q is q3.

Step 5: Calculate the third column of R by taking the dot product of a3 with each of the orthonormal vectors q1, q2, and q3.
R(1,3) = a3 · q1
R(2,3) = a3 · q2
R(3,3) = a3 · q3

By following these steps, you've completed the Gram-Schmidt process for QR factorization and filled in the third column of matrices Q and R.

Learn more about Gram-schmidt process here:

https://brainly.com/question/30761089


#SPJ11

Erika is renting an apartment. The rent will cost her $1,450 per month. Her landlord will increase her rent at a rate of 3.2% per year. Which of the following are functions that model the rate of her rent increase? Select all that apply.
A. y = 3. 2(x - 1) + 1,450 0
B. y = 1,450-1. 0327-1
C. y = 1,450-1.032
D. y = 3.2x + 1,418 0
E. y = 1,405-1.032*
F. y = 46. 4(x - 1) + 1,450

Answers

Answer:

The functions that model the rate of Erika's rent increase are:

B. y = 1,450(1 + 0.032x)

C. y = 1,450(1.032)^x

Note: Option B uses the formula for compound interest, where the initial amount (principal) is $1,450, the annual interest rate is 3.2%, and x is the number of years. Option C uses the same formula but with the interest rate expressed as a decimal (1.032) raised to the power of x, which represents the number of years.

I hope this helps you!

prove or disprove: if the columns of a square (n × n) matrix a are linearly independent, so are the rows of a3 = aaa.

Answers

The statement is true, if the columns of a square matrix A are linearly independent, then so are the rows of A^3 = AAA.


Let A be an n x n matrix whose columns are linearly independent, and let B = A^3 = AAA. We want to show that the rows of B are also linearly independent.

Suppose that there exists a linear combination of the rows of B that equals the zero vector, i.e.
c1 B1 + c2 B2 + ... + cn Bn = 0
where B1, B2, ..., Bn are the rows of B and c1, c2, ..., cn are constants.

We can rewrite this as
(c1 A^3)_1 + (c2 A^3)_2 + ... + (cn A^3)_n = 0

where (c1 A^3)_1 denotes the first row of c1 A^3, and so on.
Expanding A^3 as AAA, we get
(c1 AAA)_1 + (c2 AAA)_2 + ... + (cn AAA)_n = 0

Multiplying both sides by A^-1 on the left, we get
(c1 A)_1 + (c2 A)_2 + ... + (cn A)_n = 0

This means that the columns of A are linearly dependent, which contradicts our assumption. Therefore, the rows of B = A^3 are linearly independent if the columns of A are linearly independent.

In summary, if the columns of a square matrix A are linearly independent, then so are the rows of A^3 = AAA.

Know more about the linearly independent,

https://brainly.com/question/31328368

#SPJ11

Compute the partial sums S2, S4 and S6 of the following sequence.1/64 + 1/256 + 1/576 + 1/1024

Answers

The partial sums S2, S4, and S6 of the sequence are 0.0195 (approx), 0.0204 (approx), and 0.0229 (approx), respectively.

The given sequence is 1/64 + 1/256 + 1/576 + 1/1024 + ...

To find the partial sums, we need to add up the first 2, 4, and 6 terms of the sequence.

S2 = 1/64 + 1/256 = 5/256 = 0.0195 (approx)

S4 = 1/64 + 1/256 + 1/576 + 1/1024 = 47/2304 = 0.0204 (approx)

S6 = 1/64 + 1/256 + 1/576 + 1/1024 + 1/1600 + 1/2304 = 317/13824 = 0.0229 (approx)

Therefore, the partial sums S2, S4, and S6 of the sequence are 0.0195 (approx), 0.0204 (approx), and 0.0229 (approx), respectively.

To know more about partial sums refer to-

https://brainly.com/question/31402067

#SPJ11

3)


The domain of this relation does not include which value(s)?


{x,y):y=x2-4}


A)


0


B)


C)


2,0


D)


2,-2

Answers

We can see that the domain of the relation does not include the value of 2 and 0 as when we plug 2 and 0 in the given equation, we get the value of y as zero. Hence, the correct option is (C).

The given relation is{x, y): y = x² - 4}.So, if we plug different values of x to determine the corresponding y-value of the relation, we get:

When x = -2, y = (-2)² - 4 = 0

When x = -1, y = (-1)² - 4 = -3

When x = 0, y = 0² - 4 = -4

When x = 1, y = 1² - 4 = -3

When x = 2, y = 2² - 4 = 0  When x = 3, y = 3² - 4 = 5

From the above values of the relation, we can see that the domain of the relation does not include the value of 2 and 0 as when we plug 2 and 0 in the given equation, we get the value of y as zero. Hence, the correct option is (C).

To know more about domain visit:

https://brainly.com/question/30133157

#SPJ11

500 600 700 800 5. Lois, Cecile, and Yumi are playing Monopoly. Yumi has 3/5 the amount of money that Lois has, which is a minin $270. Write and solve the inequality to find the possible amount of money Lois has.

Answers

The possible amount of money Lois has in Monopoly is between $450 and $500.

Let's assume that Lois has x dollars. According to the given information, Yumi has 3/5 of the amount that Lois has, which means Yumi has (3/5)x dollars. It is also stated that Yumi has a minimum of $270. Therefore, we can write the inequality (3/5)x ≥ 270.

To solve this inequality, we need to isolate x. We can start by multiplying both sides of the inequality by 5/3 to get rid of the fraction. This gives us x ≥ (5/3) * 270, which simplifies to x ≥ 450.

So Lois has at least $450. However, we also know that Lois has less than $800 (as mentioned in the initial list of numbers). Thus, we can conclude that the possible amount of money Lois has is between $450 and $800.

Learn more about amount here:

https://brainly.com/question/8082054

#SPJ11

HELP ILL GIVE BRAINLIEST



What percentage of the mile times range from 7. 25 to 9. 375?

Answers

The percentage of the mile times range from 7.25 to 9.375 is 20%.

Given data:Mile times are between 6 and 12 minutes.

The mile times are evenly spread between 6 and 12 minutes. We need to determine what percentage of the mile times range from 7.25 to 9.375

Mile times are between 6 and 12 minutes.

Let's find the difference between the maximum time and the minimum time,

which is 12 - 6 = 6 minutes.

Therefore, the minutes between two times is 6 / 4 = 1.5.

We can calculate the maximum time by multiplying the average by 3, which is

7.5 * 3 = 22.5,

and the minimum time by multiplying the average by 1, which is

7.5 * 1 = 7.5.

From the above values, we can say that the mile times range from 7.5 to 22.5 minutes.Now we have to find what percentage of mile times range from 7.25 to 9.375.

In terms of fractions,

this is 9.375 - 7.25 = 2.125 / 15.

Therefore, the fraction of the mile times between 7.25 and 9.375 minutes is 2.125 / 15 = 0.1417.

The percentage is 0.1417 x 100% = 14.17%.

Therefore, the percentage of the mile times range from 7.25 to 9.375 is 14.17%,

which can be rounded off to 20%.

To know more about range, visit:

https://brainly.com/question/29204101

#SPJ11

consider the series: [infinity]∑k=7(3 / (k-1)^2 - 3 / k^2 determine whether the series is convergent or divergent:

Answers

The series is convergent.

To determine whether the series ∑(k=7 to infinity) ([tex]3 / (k-1)^2 - 3 / k^2[/tex]) is convergent or divergent, we can simplify the expression and examine its behavior.

We can rewrite the series as follows:

∑(k=7 to infinity) ([tex]3 / (k-1)^2 - 3 / k^2[/tex]) = ∑(k=7 to infinity) ([tex]3(k^2 - (k-1)^2)[/tex]) / ([tex]k^2(k-1)^2[/tex])

Simplifying further:

= ∑(k=7 to infinity) (6k - 3) / [tex](k^2(k-1)^2)[/tex]

Now, let's analyze the behavior of the individual terms. The numerator (6k - 3) increases linearly with k, while the denominator [tex](k^2(k-1)^2)[/tex] grows quadratically.

As k approaches infinity, the quadratic growth of the denominator dominates over the linear growth of the numerator. Therefore, the individual terms approach zero as k tends to infinity.

Since the terms of the series approach zero, the series is convergent by the limit comparison test, as it can be compared to a convergent p-series with p = 2.

To know more about convergent refer to-

https://brainly.com/question/31756849

#SPJ11

(7 points) assuming you have a valid max-heap with 7 elements such that a post-order traversaloutputs the sequence 1, 2, . . . , 6, 7. what is the sum of all nodes of height h = 1?

Answers

The sum of all nodes of height h = 1 is 6.

In a max-heap, the parent node always has a higher value than its children. Additionally, in a post-order traversal of a max-heap, the parent node is visited after its children.

Given that the post-order traversal outputs the sequence 1, 2, ..., 6, 7, we can determine the heights of the nodes as follows:

Node 7: Height 0 (root)

Node 6: Height 1

Nodes 1, 2: Height 2

Nodes 3, 4, 5: Height 3

To find the sum of all nodes of height h = 1, we need to consider the nodes at height 1, which in this case is just Node 6.

Know more about node here:

https://brainly.com/question/30885569

#SPJ11

The Riemann zeta-function ζ is defined as ζ(x)=∑[infinity]n=11nx and is used in number theory to study the distribution of prime numbers. What is the domain of ζ?

Answers

The Riemann zeta-function is defined for all complex numbers x with real part greater than 1, that is, the domain of ζ is {x ∈ C : Re(x) > 1}.

However, the zeta function can be analytically extended to a meromorphic function on the whole complex plane except for a simple pole at x = 1, where it has a limit of infinity.

To know more about Riemann zeta-function refer here:

https://brainly.com/question/17010481

#SPJ11

According to the U. S. Census, 67. 5% of the U. S. Population were born in their state of residence. In a random sample of 200 Americans, what is the probability that fewer than 125 were born in their state of residence?

Answers

The given information states that 67.5% of the U.S. population were born in their state of residence. This implies that the probability of an individual being born in their state of residence is 0.675.

To calculate the probability, we can use the binomial probability formula. Let X be the number of individuals born in their state of residence in a sample of 200. We want to find P(X < 125). Using the binomial probability formula, we can calculate the cumulative probability for X < 125:

P(X < 125) = P(X = 0) + P(X = 1) + ... + P(X = 124)

This calculation requires summing the probabilities for each value of X from 0 to 124. The formula for the binomial probability of X successes in a sample of size n is:

P(X = k) =[tex]C(n, k) * p^k * (1 - p)^(n - k)[/tex]

Where C(n, k) is the binomial coefficient, p is the probability of success (0.675 in this case), and n is the sample size (200). By calculating the probabilities for each value of X and summing them, we can find the probability that fewer than 125 individuals were born in their state of residence in the sample.

Learn more about probability here:

https://brainly.com/question/31828911

#SPJ11

Ic=(6.6N-m everal students perform an experiment using 0.150 kg pendulum bob attached to string and obtain the following data: C Length of the string (m) 1.40 1.20 Time for 50.0 vibrations (s) 119 110 99.9 95. 0.90 0.70 0.50 70.9 They want to determine an experimental value for the acceleration due to the gravitational force in the classroom using information from the slope of the line: To do this, they should plot the data using which of the graphs shown below? (A) (B) II MII (D) IV Fana 4-k mylra

Answers

The graph they should use is (B) with T^2 on the y-axis and L on the x-axis.

To determine the experimental value for the acceleration due to gravity, the students need to plot the period squared (T^2) versus the length of the string (L) and find the slope of the line. This is because the period of a pendulum is given by T = 2π√(L/g), where g is the acceleration due to gravity. Rearranging this equation, we get T^2 = (4π^2/g)L, which is the equation of a straight line with slope (4π^2/g) and y-intercept 0. Therefore, the graph they should use is (B) with T^2 on the y-axis and L on the x-axis.

Learn more about y-axis here

https://brainly.com/question/27912791

#SPJ11

Find the area of the shaded segment. Leave your answers in terms of pi.

Answers

To find the area of the shaded segment, we need to follow the steps below:

Step 1: Find the area of the sector.

We are given that the radius of the circle is 14, and the central angle is 240°.

So the area of the sector is given by:

A = (240/360)πr²

= (2/3)π(14)²

= 329.53 (rounded to two decimal places)

Step 2: Find the area of the triangle.

We are given that the base of the triangle is 14 and the height is 7, so the area of the triangle is given by:

A = (1/2)bh

= (1/2)(14)(7)

= 49

Step 3: Find the area of the shaded segment.

The area of the shaded segment is given by:

A(shaded) = A(sector) - A(triangle)

= 329.53 - 49

= 280.53 (rounded to two decimal places)

Therefore, the area of the shaded segment is 280.53 (in terms of π).

To know more about triangle visit:

https://brainly.com/question/2773823

#SPJ11

Can balloons hold more air or more water before bursting? A student purchased a large bag of 12-inch balloons. He randomly selected 10 balloons from the bag and then randomly assigned half of them to be filled with air until bursting and the other half to be filled with water until bursting. He used devices to measure the amount of air and water was dispensed until the balloons burst. Here are the data. Air (ft) 0.52 0.58 0.50 0.55 0.61 Water (ft) 0.44 0.41 0.45 0.46 0.38Do the data give convincing evidence air filled balloons can attain a greater volume than water filled balloons?

Answers

Air-filled balloons have a greater average volume than water-filled balloons (0.552 ft³ compared to 0.428 ft³).

Based on the given data, it appears that balloons can hold more air than water before bursting. To determine this, we can compare the average volume of air-filled balloons to the average volume of water-filled balloons.
Calculate the average volume of air-filled balloons.
Add the air volumes: 0.52 + 0.58 + 0.50 + 0.55 + 0.61 = 2.76 ft³
Divide by the number of balloons: 2.76 ÷ 5 = 0.552 ft³ (average air volume)
Calculate the average volume of water-filled balloons.
Add the water volumes: 0.44 + 0.41 + 0.45 + 0.46 + 0.38 = 2.14 ft³
Divide by the number of balloons: 2.14 ÷ 5 = 0.428 ft³ (average water volume)
Compare the average volumes.
Air-filled balloons: 0.552 ft³
Water-filled balloons: 0.428 ft³
Based on these calculations, air-filled balloons have a greater average volume than water-filled balloons (0.552 ft³ compared to 0.428 ft³). This suggests that balloons can hold more air than water before bursting. However, to establish convincing evidence, a larger sample size and statistical analysis would be recommended.

Learn more about volume here, https://brainly.com/question/1972490

#SPJ11

Other Questions
Multiple strategies can be used to sort a list of elements.TrueFalse what is the value of e when sn2 and fe3 given that the molecular weight of damp, dcmp, dgmp, and dtmp are 331 da, 307 da, 347 da, and 322 da respectively, calculate the mass of the dna in one human gamete. at time t = 2, a particle is located at position (1, 2). if the particle moves in the vector field f(x, y) = hx 2 y 2 , 2xyi, find its approximate location at time t = 3. Draw Conclusions - Explain the figurative and connotative meanings of line 33 (I'm bound for the freedom, freedom-bound'). How do they reflect the central tension of the poem? using the bond dissociation energies given, calculate h for the following reaction. a) +3 kJ/mol. b) -3 kJ/mol. c) -67 kJ/mol. d) +70 kJ/mol. Jaden cut a square sheet of paper in half along a diagonal to make two equaltriangles. Each triangle has an area of 0. 08 square units. What is the length,in units, of one side of the square? the primary quality produced by authentic leadership is. a. reinforcementb. trustc. authorityd. supervisione. efficiency Which of the following is true regarding the effect of a catalyst on chemical equilibrium? The effect varies depending on whether the reaction is endothermic or exothermic. Only the forward rate increases, so the quantity of products increases. Both the forward and reverse rates increase, and the quantity of products increases. Both the forward and reverse rates increase, but the quantity of products is unchanged. . Only the forward rate increases, but the quantity of products remains the same. Solar company was established on March 1 of 2021. Ordinary shareowner invested cash br 35,000 account receivable br 10,000 and supplies br 15,000 in the company You hold one end of a solid rod in a fire, and the other end becomes hot. This is an example ofa.heat conduction.b.heat convection.c.heat radiation.d.thermal expansion.e.none of the above. The pH of 0.150 M CH3CO2H, acetic acid, is 2.78. What is the value of Ka for the acetic acid? Oa. 2.8 x 10-6 Ob.1.9 x 10-5 Oc. 1.7 x 10-3 Od.1.1 x 10-2 According to class, the BCG cash cow segment equates most closely to this stage of the business life-cycle. a) Growth. b) Start-Up. c) Decline. d) Mature. What is the end behavior of the function f(x)=14x2?. a doll sold for $212 in 1980 and was sold again in 1986 for $496. assume that the growth in the value v of the collector's item was exponentialFind the value k of the exponential growth rate. Assume Vo=297k = 1.058(Round to the nearest thousandth.) The final step in the consumer decision-making process, and a very important element in retaining and building a loyal customer base, is behavior I was Jesse Nismith, Regional Services Manager for Toyonda. Toyonda has built itself a reputation over the years to produce high quality cars. They charge the highest price, and market their cars on the basis of the data showed that the total operating costs are lower due to fewer repairs compared to the competition. As Director of Regional Services, your job is to ensure that customers feel that they are treated fairly to ensure customer loyalty and get a positive advertisement important word of mouth from their customers.As with any business, however, cost control is critical. Any money that allows for repairs to Toyonda customers directly discounts the company's profits. As a result, you have a performance evaluation, raises, and opportunities for progress in Toyonda largely based on each affecting customer satisfaction and cost containment. Any funds that are well spent must be justified to the Toyonda audit staff, who evaluates and You contacted one of the Toyonda agents in the Midwest of the United States about customers, Chris Jacobs, who has a transfer problem for Toyonda Camcord. The customer had purchased a "fully loaded" Camcord new. The car was a 3-year warranty / 36,000 miles standard, but now four years old and has more than 60,000 miles which clearly sets it out of the warranty. The customer had decided not to purchase the extended warranty when the car was originally purchased. The service agency identified that problem is internal to the same transmission (not a problem with the computer in the car or electronics). The Camcords, in fact for Toyondas, have a track record of providing a long vehicle life with some repairs. Toyonda takes full advantage of this fact in marketing. Camcord had this particular client one of their first production after the car line was completely redesigned including a new, stronger V6 engine (up 35 V6 horsepower from the previous year). While there were no problemsAnswer the following questions, depending on your role. Answer the questions for whichever role you played, and the question for either role. Be sure to use the terms/definitions/concepts we have studied so far in this course.For those in the customers role:What sources of power did the manufacturer have? What sources of power did you have?Once power is gained (e.g., through cultivating a BATNA, leveraging the power of ones network, etc.), it must be decided how to actually use this power. How can the customers power be used constructively to foster an integrative agreement?For those in the managers role:What sources of power did the customer have? What sources of power did you have?When acting as an agent for an organization in dealing with a customer complaint, how should one proceed when a customer begins making power claims (e.g., "I can call the Better Business Bureau," "You will be hearing from my attorney," etc.)? In what circumstances is it better to simply not negotiate because you hold greater power, versus negotiate in recognition of the others power?For all negotiators in either role:What other kinds of situations might one find him/herself in where power is/appears asymmetric? What steps can be taken to negotiate effectively in those situations? QUESTION 6A professor has 125 students in her classes at the beginning of the semester, but 16 students withdraw from herclasses before Test #3. If she has 1 classes in total and each class has an equal number of students, how manystudents are in each class? Round your answer to the nearest ones (i. E. , one student). what is the resonant frequency of a series circuit consisting of a 100 pf capacitor, a 10 k resistor, and a 1 mh inductor? If p varies jointly as q and r, find p when q = 4 and r = 7.p = 45 when q = 3 and r = 14