Prove that a median in a right triangle joining the right angle to the hypothenuse has the same length as the segment connecting midpoints of the legs. Hint: You may want to show first that this median equals half the hypotenuse.

The 9th term of the sequence 128, 32, 8, 2, 1/2 is 0.003.

To find the 9th term of the sequence, we need to determine the pattern followed by the sequence. We can see that each term is one-fourth of the previous term. Using this pattern, we can write the general formula for the nth term of the sequence as: a_n = 128*(1/4)^(n-1)

Now we can substitute n = 9 in the formula and simplify to get the 9th term as: a_9 = 128*(1/4)^8 ≈ 0.003

A geometric progression, sometimes referred to as a geometric sequence in mathematics, is a series of non-zero numbers where each term following the first is obtained by multiplying the preceding one by a constant, non-zero value known as the common ratio. For instance, the geometric progression 2, 6, 18, 54, etc. has a common ratio of 3. Similar to that, the geometric series 10, 5, 2.5, 1.25,... has a common ratio of 1/2.

Know more about sequence here:

https://brainly.com/question/12687794

#SPJ11

To find the point Q that partitions the line segment LM in a given ratio, we can use the formula for the coordinates of the point that divides a line segment in a given ratio.

Let's say we want to divide the line segment LM in the ratio r:s. The coordinates of the point Q can be found using the following formula:

Q = ((s * Lx) + (r * Mx)) / (r + s), ((s * Ly) + (r * My)) / (r + s)

In this case, we want to find the point Q that partitions LM in a given ratio. Let's assume the ratio is r:s.

Given:

L(-2, 5) and M(2, -3)

Let's say the ratio r:s is given as 2:3.

Substituting the values into the formula:

Qx = ((3 * (-2)) + (2 * 2)) / (2 + 3) = (-6 + 4) / 5 = -2 / 5

Qy = ((3 * 5) + (2 * (-3))) / (2 + 3) = (15 - 6) / 5 = 9 / 5

Therefore, the point Q(6/5, -7/5) partitions the line segment LM in the ratio 2:3.

Learn more about coordinates here:

https://brainly.com/question/15300200

#SPJ11

The interquartile range (IQR) is a measure of variability that represents the difference between the 75th and 25th percentiles of a distribution.

It can be thought of as the quartile or 25% of the variable that represents the middle 50% of the data. In other words, it excludes the top 25% and bottom 25% of the data, focusing on the range of values that fall in between. The formula IQR = 0.3Q1 suggests that the IQR is approximately 0.3 times the value of the first quartile (Q1), which is the 25th percentile of the distribution.

This formula provides an estimate of the IQR based on the lower 25% of the data. However, it is important to note that this formula is not exact and may not hold for all distributions.

Learn more about interquartile range here:

https://brainly.com/question/29204101

#SPJ11

The flux of the vector field F(x, y, z) = zk across the unit sphere S is zero. This means that the vector field is divergence-free, since the flux through any closed surface enclosing the origin is also zero by the divergence theorem.

To find the flux of the vector field F(x, y, z) = zk across the surface S, we can use the surface integral formula:

flux = ∫∫S F · dS

where F is the vector field, S is the surface, and dS is the oriented surface element.

First, we need to parameterize the surface S using spherical coordinates. Let ϕ be the polar angle, ranging from 0 to π, and let θ be the azimuthal angle, ranging from 0 to 2π. Then, we can parameterize the surface S as:

r(ϕ, θ) = (sin ϕ cos θ, sin ϕ sin θ, cos ϕ)

Next, we can compute the outward unit normal vector n at each point on the surface using the gradient of the sphere equation:

n(ϕ, θ) = grad(x^2 + y^2 + z^2) / |grad(x^2 + y^2 + z^2)| = r(ϕ, θ)

since |grad(x^2 + y^2 + z^2)| = 2r(ϕ, θ), where r is the radius of the sphere (which is 1 in this case).

Then, we can compute the flux of F across S by integrating the dot product of F and n over the surface:

flux = ∫∫S F · dS = ∫∫S (0, 0, z) · n dS= ∫0^2π ∫0^π (0, 0, cos ϕ) · (sin ϕ cos θ, sin ϕ sin θ, cos ϕ) sin ϕ dϕ dθ= ∫0^2π ∫0^π 0 dϕ dθ= 0.

For such more questions on Vector field:

https://brainly.com/question/30075531

#SPJ11

The value of the flux of the vector field F(x, y, z) = zk across the unit sphere S is 0.

From the question, we have the following parameters that can be used in our computation:

x² + y² + z² = 1

Also, we have

F(x, y, z) = zk

To do this, we use

Flux = ∫∫S F · dS

Where

r(ϕ, θ) = (sin ϕ cos θ, sin ϕ sin θ, cos ϕ)

In this case

r = radius of the sphere S

Next, we have

n(ϕ, θ) = grad(x² + y² + z²) / |grad(x² + y² + z²)| = r(ϕ, θ)

This gives

n(ϕ, θ) = grad(x² + y² + z²) = r(ϕ, θ)

Integrate the dot product of F and n over the surface

Flux = ∫∫S F · dS

Flux = ∫∫S (0, 0, z) · n dS

Flux = ∫0² * π ∫[tex]0^\pi[/tex] (0, 0, cos ϕ) · (sin ϕ cos θ, sin ϕ sin θ, cos ϕ) sin ϕ dϕ dθ

Evaluate the product

Flux = ∫0

So, we have

Flux = 0

Hence, the flux of the vector field is 0

Read more about vector field at

https://brainly.com/question/13982128

#SPJ4

The correct answer to the given expression is (C) 48√3(cos 120° + i sin 120°).

We can simplify the expression [tex][2√3(cos 120^o + i sin 120^o)]^4[/tex] by using De Moivre's theorem, which states that for any complex number z = r(cos θ + i sin θ), the nth power of z is given by:

[tex]z^n = r^n(cos (n\theta) + i sin (n\theta))[/tex]

Using this formula, we can write:

[tex][2\sqrt3(cos\ 120+ i sin \ 120)]^4 = (2\sqrt3)^4(cos\ 480 + i sin\ 480)[/tex]

Simplifying further:

(2√3)⁴(cos 480° + i sin 480°) = 48(cos 480° + i sin 480°)

Since the cosine and sine functions have a period of 360 degrees, we can add or subtract any multiple of 360 degrees to the angle inside the cosine and sine functions without changing the value of the expression.

Therefore, we can subtract 360 degrees from the angle 480 degrees to get an angle between 0 and 360 degrees:

48(cos 480° + i sin 480°) = 48(cos 120° + i sin 120°)

Learn more about Mathematical operations here:

https://brainly.com/question/20628271

#SPJ1

To prove the statement "For all real numbers x and y, |x-y| = |y-x|," we can use proof by cases.

Case 1: x ≥ y

In this case, |x-y| = x-y and |y-x| = -(x-y).

So, |x-y| = x-y = -(y-x) = |y-x|.

Case 2: x < y

In this case, |x-y| = -(x-y) and |y-x| = y-x.

So, |x-y| = -(x-y) = y-x = |y-x|.

Since these two cases cover all possible values of x and y, we have proven that |x-y| = |y-x| for all real numbers x and y.

To know more about real numbers , visit:

https://brainly.com/question/10547079

#SPJ11

The correct answer is  option c) (0,100).

How to find the optimal solution to a linear programming problem with constraints?

The feasible region for the given linear programming problem is bounded by the lines 2X + 4Y = 800, 6X + 3Y = 300, X = 0, and Y = 0.

Solving the system of equations for the intersection points of the lines, we get:

2X + 4Y = 800, or Y = 200 - 0.5X

6X + 3Y = 300, or Y = 100 - 2X

Setting Y = 0 in these equations, we get:

200 = -0.5X, or X = 400

100 = 2X, or X = 50

So, the feasible region is a triangle bounded by the lines X = 0, Y = 0, and the lines 2X + 4Y = 800 and 6X + 3Y = 300.

To find the optimum solution, we need to evaluate the objective function 20X + 30Y at the vertices of the feasible region:

At (0,0), the value of the objective function is 0.

At (400,0), the value of the objective function is 8000.

At (50,100), the value of the objective function is 3500.

Therefore, the optimum solution occurs at the point (50,100).

Answer: (c) (0,100).

Learn more about linear programming problem

brainly.com/question/15417573

#SPJ11

The statement says that a manager at Claire's makes $500 a week give or take $100 and a doctor at New York Presbyterian makes $5,000 a week give or take $100.

We want to find out which person would have had a more significant change to his or her salary if $100 was taken away from each of them relatively.

We will assume that the $100 given or take on the salaries are standard deviations. We will use the formula:

Coefficient of variation = (standard deviation / mean) x 100

Coefficient of variation of the manager's salary = (100 / 500) x 100 = 20%

Coefficient of variation of the doctor's salary = (100 / 5000) x 100 = 2%

Since the coefficient of variation is higher for the manager's salary than for the doctor's salary, it means that the $100 taken away from the manager will be more significant than the $100 taken away from the doctor.

The manager's salary varies more as a percentage of the mean salary than the doctor's salary.

To know more about cost estimation Visit :-

https://brainly.in/question/40164367

#SPJ11

The value of  t = -10/3 is outside the time interval [0, 4], we can conclude that the particle does return to its initial position.

The acceleration of the particle is given by the derivative of its velocity function: a(t) = v'(t) = 10 + 3t. Substituting t = 5.1, we get a(5.1) = 10 + 3(5.1) = 25.3.

The speed of the particle is given by the absolute value of its velocity function: |v(t)| = |10t + 3t^2|. To find when the speed is 1, we solve the equation |10t + 3t^2| = 1.

This gives us two intervals: (-3, -1/3) and (1/3, 2/3). Since we're only interested in the interval [0, 1.5], we can conclude that the speed is 1 when t = 1/3.

The position function of the particle is given by integrating its velocity function: x(t) = 5t^2 + 3/2 t^3 + 7. Substituting t = 4, we get x(4) = 120 + 48 + 7 = 175.

To determine whether the particle is moving toward or away from the origin, we calculate its velocity at t = 4: v(4) = 10(4) + 3(4)^2 = 58, which is positive.

Therefore, the particle is moving away from the origin at time t = 4.

To determine if the particle returns to its initial position, we need to solve the equation x(t) = 7 for t.

This gives us a quadratic equation: 5t^2 + 3/2 t^3 = 0. Factoring out t^2, we get t^2(5 + 3/2t) = 0.

This has two solutions: t = 0 and t = -10/3. Since t = -10/3 is outside the time interval [0, 4], we can conclude that the particle does return to its initial position.

To learn more about Interval :

https://brainly.com/question/30460486

#SPJ11

To find the number of terms needed to calculate the sum of the series with a desired accuracy, we need to determine the smallest integer value of n for which the absolute error of the partial sum is less than 0.0003.

The series given is \sum_{n=1}^\infty (-1)^{n-1}\frac{9}{n^4}. To find the sum to a desired accuracy, we can calculate the partial sums of the series and check the absolute error.

Let's denote the partial sum of the series with n terms as S_n. To find the absolute error, we need to calculate the difference between the actual sum (which is unknown since the series is infinite) and S_n.

We continue calculating S_n by adding more terms until the absolute error becomes smaller than 0.0003. This means we need to find the smallest value of n for which |actual sum - S_n| < 0.0003.

By incrementally increasing the value of n, we compute the partial sums S_n and check the absolute error. Once we reach a value of n that satisfies |actual sum - S_n| < 0.0003, we have found the number of terms needed to achieve the desired accuracy.

Note that since the series converges (alternating series with decreasing terms), the partial sums will approach the actual sum as n increases. Thus, by adding more terms, we can improve the accuracy of the approximation.

Learn more about series  here:

https://brainly.com/question/12707471

#SPJ11

The amount of fertilizer required for a 200 square-foot garden is 5 pounds.

According to the given data, the directions say to use 4 pounds of fertilizer for 160 square feet of soil. Then, for 1 square foot of soil, Omar needs 4/160 = 0.025 pounds of fertilizer.So, to find the amount of fertilizer needed for 200 square feet of soil, we will multiply the amount of fertilizer for 1 square foot of soil with the area of Omar's garden.i.e., 0.025 × 200 = 5 pounds of fertilizer.
So, Omar needs 5 pounds of fertilizer for a 200 square-foot garden.

Therefore, the amount of fertilizer required for a 200 square-foot garden is 5 pounds.

To know more about area, click here

https://brainly.com/question/1631786

#SPJ11

The Laplace transform of the constant function f(t) = 3 is F(s) = 3/s.

The Laplace transform of the function g(t) = t is G(s) = 1/s^2.

The Laplace transform of the function h(t) = -5t is H(s) = -5/s^2.

The Laplace transform of the function k(t) = t^5 is K(s) = 120/s^6.

To find the Laplace transform of the constant function f(t) = 3, we use the definition of the Laplace transform:

F(s) = ∫[0 to ∞] e^(-st) * f(t) dt.

Plugging in the given function f(t) = 3, we have:

F(s) = ∫[0 to ∞] e^(-st) * 3 dt.

Since 3 is a constant, it can be taken out of the integral:

F(s) = 3 * ∫[0 to ∞] e^(-st) dt.

The integral of e^(-st) with respect to t is -1/s * e^(-st).

Evaluating the integral from 0 to ∞ gives us:

F(s) = 3 * [-1/s * e^(-s∞) - (-1/s * e^(-s0))].

Since e^(-s∞) approaches 0 as t approaches infinity, we have:

F(s) = 3 * [-1/s * 0 - (-1/s * e^(0))].

Simplifying further:

F(s) = 3 * [0 - (-1/s)] = 3/s.

To find the Laplace transform of the function g(t) = t, we again use the definition of the Laplace transform:

G(s) = ∫[0 to ∞] e^(-st) * g(t) dt.

Plugging in the given function g(t) = t, we have:

G(s) = ∫[0 to ∞] e^(-st) * t dt.

We can integrate by parts using the formula ∫u * dv = u * v - ∫v * du.

Let u = t and dv = e^(-st) dt. Then, du = dt and v = -1/s * e^(-st).

Applying the formula, we get:

G(s) = [-t * 1/s * e^(-st)] - ∫[-1/s * e^(-st) * dt].

Simplifying further:

G(s) = -t/s * e^(-st) + 1/s ∫e^(-st) dt.

The integral of e^(-st) with respect to t is -1/s * e^(-st).

Substituting this back into the equation, we have:

G(s) = -t/s * e^(-st) + 1/s * [-1/s * e^(-st)].

Simplifying further:

G(s) = -t/s * e^(-st) - 1/s^2 * e^(-st).

Factoring out e^(-st):

G(s) = e^(-st) * (-t/s - 1/s^2).

Rearranging terms:

G(s) = (-t - s) / (s^2).

This can be further simplified to:

G(s) = 1/s^

For more questions like Laplace click the link below:

https://brainly.com/question/30759963

#SPJ11

The solution to the differential equation dy/dx y^2 = 0, subject to the initial condition y(0) = 10 is y(x) = 10.

The solution to the differential equation dy/dx y^2 = 0, subject to the initial condition y(0) = 10 is:

y(x) = 10

To solve the given differential equation, we can first separate the variables by dividing both sides by y^2 to get:

1/y^2 dy/dx = 0

We can then integrate both sides with respect to x to obtain:

-1/y = C

where C is the constant of integration. Solving for y, we get:

y = -1/C

Since we have an initial condition of y(0) = 10, we can substitute this into the solution to solve for C:

10 = -1/C

C = -1/10

Substituting C back into the solution, we get:

y = -10

Therefore, the solution to the differential equation dy/dx y^2 = 0, subject to the initial condition y(0) = 10 is y(x) = 10.

Learn more about differential equation here

https://brainly.com/question/1164377

#SPJ11

The relative maximum of the function is at the point (1, 4) on the grid.

To determine the relative maximum of the given parabola, we need to examine its shape and position on the grid.

The parabola is described as opening downward, which means it has a concave shape and its vertex represents the highest point on the graph.

The vertex of the parabola is given as (1, 4), which means the highest point of the parabola occurs at x = 1 and y = 4. In other words, the parabola reaches its maximum value of 4 when x equals 1.

Since the vertex is the highest point of the parabola and no other point on the graph is higher, we can conclude that the relative maximum of the function is at the point (1, 4) on the grid.

This means that for any other point on the graph, the y-coordinate value will be lower than 4. The parabola opens downward from the vertex, and as we move away from the vertex along the x-axis in either direction, the y-values of the points on the parabola decrease. Therefore, the relative maximum occurs only at the vertex.

Learn more about parabola here:

https://brainly.com/question/11911877

#SPJ11

Hence, there were 149 children and 230 adults who swam at the public pool that day.

Let the number of children who swam at the public pool that day be 'c' and the number of adults who swam at the public pool that day be 'a'.

Given that the total number of people who swam that day is 379.

Therefore,

c + a = 379   ........(1)

Now, let's calculate the total revenue for the day.

The cost for a child is $1.50 and for an adult is $2.25.

Therefore, the revenue generated by children = $1.5c and the revenue generated by adults = $2.25

a. Total revenue will be the sum of revenue generated by children and the revenue generated by adults. Hence, the equation is given as:$1.5c + $2.25a = $741.0  ........(2)

Now, let's solve the above two equations to find the values of 'c' and 'a'.

Multiplying equation (1) by 1.5 on both sides, we get:

1.5c + 1.5a = 568.5

Multiplying equation (2) by 2 on both sides, we get:

3c + 4.5a = 1482

Subtracting equation (1) from equation (2), we get:

3c + 4.5a - (1.5c + 1.5a) = 1482 - 568.5  

=>  1.5c + 3a = 913.5

Now, solving the above two equations, we get:

1.5c + 1.5a = 568.5  

=>  c + a = 379  

=>  a = 379 - c'

Substituting the value of 'a' in equation (3), we get:

1.5c + 3(379-c) = 913.5  

=>  1.5c + 1137 - 3c = 913.5  

=>  -1.5c = -223.5  

=>  c = 149

Therefore, the number of children who swam at the public pool that day is 149 and the number of adults who swam at the public pool that day is a = 379 - c = 379 - 149 = 230.

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ11

If you buy three ABC corporate bonds with a $10 commission for each bond, it will cost a total of $3172.50.

To calculate the total cost, we need to consider the cost of the bonds themselves and the commission for each bond. Let's assume the cost of each ABC bond is X.

The cost of three ABC bonds without the commission would be 3X.

Since there is a $10 commission for each bond, the total commission cost would be 3 * $10 = $30.

Therefore, the total cost of buying three ABC bonds with commissions included would be 3X + $30.

Based on the options provided, the correct answer is (c) $3172.50, which represents the total cost of buying three ABC bonds with the commissions included.

Please note that the exact cost of each ABC bond (X) is not provided in the question, so we cannot determine the precise dollar amount. However, the correct option based on the given choices is (c) $3172.50.

Learn more about dollar here:

https://brainly.com/question/15169469

#SPJ11

The best function that would model the progression of the points in the scatter plot is an exponential function (option D).

To determine which function best models the progression of the points in the scatter plot, we can analyze the pattern of the data. Let's examine the options:

A. A linear function describes a straight line. Looking at the scatter plot, we can see that the points do not form a straight line, so a linear function is not the best choice.

B. A quadratic function represents a curve that opens upwards or downwards. The scatter plot does not exhibit a clear quadratic pattern, so a quadratic function is unlikely to be the best choice.

C. A square root function represents a curve that increases at a decreasing rate. There is no clear indication of a square root pattern in the scatter plot, so a square root function may not be the best choice.

D. An exponential function represents a curve that increases or decreases at an increasing rate. When examining the scatter plot, we can observe that the points show a clear trend of exponential growth. As the x-values increase, the corresponding y-values grow at an increasing rate. Therefore, an exponential function is likely the best choice to model the progression of the points.

To learn more about the exponential function;

https://brainly.com/question/14344314

#SPJ1

Every stage of the HRM process plays a critical role in achieving the organization's goals, and HRM managers must ensure that every stage is executed correctly.

Human Resource Management (HRM) is the process of selecting, hiring, training, developing, compensating, and evaluating employees in an organization. HRM is the backbone of an organization, as it is responsible for finding and keeping talented workers. The HRM process is an essential function for the success of an organization. Below are the stages in the HRM process:

Stage 1: Planning HRM process: The HRM process begins with the planning stage. In this stage, an organization decides how many workers they require, the kind of jobs to be filled, and the skills necessary for the job. The HRM process needs to analyze and predict future workforce needs to ensure there is a balanced workforce.

Stage 2: Recruiting: After the organization has developed a staffing plan, the next stage is to start recruiting and selecting candidates for the jobs. HRM managers should be able to attract the right candidates by promoting job postings, reviewing resumes, and conducting job interviews. The objective is to find the best person for the job.

Stage 3: Hiring: Once the recruitment process is over, HRM managers proceed to hire the best candidates. The hiring process must be done in a timely and efficient manner.

Stage 4: Developing and Training: Once hired, employees need to be trained and developed to perform their duties successfully. Employee development and training programs can help employees improve their knowledge and skills. It is essential to create a training program that aligns with the organization's goals.

Stage 5: Performance Appraisal: HRM managers must ensure that employees are performing well and meeting their targets. Regular performance appraisals help in identifying the areas that need improvement.

Stage 6: Compensation: HRM is responsible for determining the appropriate compensation packages for employees. The HRM process needs to provide equitable and fair compensation for employees.

When any part of the HRM process is neglected, it can lead to the organization's failure. For instance, if HRM managers fail to develop a staffing plan, the organization may not have the required workforce, leading to poor productivity. Similarly, if the recruitment process is not done correctly, it may lead to the hiring of the wrong employees. If there is no employee training program, employees may not have the necessary skills to perform their duties, leading to poor performance and decreased productivity.

When the HRM process works well, it can lead to increased productivity, employee satisfaction, and lower employee turnover. HRM managers can attract and retain talented employees, resulting in the organization's growth and success. A well-planned HRM process can align with the organization's goals, mission, and values, ensuring that employees are working towards the same objectives. In conclusion, the HRM process is essential to the success of an organization. Every stage of the HRM process plays a critical role in achieving the organization's goals, and HRM managers must ensure that every stage is executed correctly.

Learn more about HRM process here,What Human Resource Management activities were illustrated by Sam’s schedule in the Application Case?

https://brainly.com/question/14419086

#SPJ11

To determine the convergence of the series, let's analyze the terms and apply the ratio test. Answer : The limit evaluates to 0, which is less than 1.

The series can be written as:

∑(n=1 to ∞) n^2 * (3/8)^n

Using the ratio test, we compute the limit:

lim(n→∞) |(n+1)^2 * (3/8)^(n+1) / (n^2 * (3/8)^n)|

Simplifying the expression inside the absolute value:

lim(n→∞) |(n+1)^2 * (3/8)^(n+1) / (n^2 * (3/8)^n)|

= lim(n→∞) |(n+1)^2 * (3/8) / (n^2 * (3/8))|

Canceling out common terms:

lim(n→∞) |(n+1)^2 / n^2|

Expanding the numerator:

lim(n→∞) |(n^2 + 2n + 1) / n^2|

Taking the limit as n approaches infinity:

lim(n→∞) |1 + 2/n + 1/n^2|

As n approaches infinity, both (2/n) and (1/n^2) tend to zero, leaving us with:

lim(n→∞) |1|

Since the limit evaluates to 1, the ratio test does not provide a definitive answer. In such cases, we need to consider other convergence tests.

Let's try using the root test instead. The root test states that if the limit of the nth root of the absolute value of the terms is less than 1, the series converges.

We compute the limit:

lim(n→∞) [(n^2 * (3/8)^n)^(1/n)]

Simplifying inside the limit:

lim(n→∞) [(n^(2/n) * ((3/8)^n)^(1/n))]

Taking the nth root of the terms:

lim(n→∞) [n^(2/n) * (3/8)^(1/n)]

Since (3/8) is a constant, we can pull it out of the limit:

(3/8) * lim(n→∞) [n^(2/n) / n]

Simplifying further:

(3/8) * lim(n→∞) [(n^(1/n))^2 / n]

Taking the limit as n approaches infinity:

(3/8) * (1^2 / ∞) = 0

The limit evaluates to 0, which is less than 1. Therefore, by the root test, the series converges.

In summary, both the ratio test and the root test confirm that the series converges.

Learn more about converges : brainly.com/question/29258536

#SPJ11

Answer: (a) The English system of units used in surveying:

Length: The basic unit of length is the foot (ft).

Area: The basic unit of area is the square foot (ft²).

Volume: The basic unit of volume is the cubic foot (ft³).

Angles: The basic unit of angles is degrees (°).

(b) The SI (International System of Units) system of units used in surveying:

Length: The basic unit of length is the meter (m).

Area: The basic unit of area is the square meter (m²).

Volume: The basic unit of volume is the cubic meter (m³).

Angles: The basic unit of angles is the degree (°) or the radian (rad).

It's worth noting that while the English system is still used in some countries, the SI system is the globally recognized and widely adopted system of measurement.

Step-by-step explanation:

Answer:

m ∠B = 29°

Step-by-step explanation:

When two angles are complementary, they from a right angle.  Therefore, the sum of the measures of the two angles equals 90°.

Step 1:  We can first find x by setting the sum of the two expressions given for the measures of angles A and B equal to 90:

m ∠A + m ∠B = 90

(8X + 5) + (3x + 8) = 90

(8x + 3x) + (5 + 8) = 90

11x + 13 = 90

11x = 77

x = 7

Step 2:  Now we can plug in 7 for x in 3x + 8 (i.e., the expressions that represents the measure of angle B) to find the measure of angle B:

m ∠B = 3(7) + 8

m ∠B = 21 + 8

m ∠B = 29°

Thus, the measure of angle B is 29°.

Based on the information provided, we have two given values for x: 14 and 15. The range of values for x can be expressed as [14, 15].

However, you also mentioned the value "1620". If this is intended to be part of the range for x, please provide additional clarification or context.

Learn more about range here:

https://brainly.com/question/29204101

#SPJ11

If the determinant of a matrix A is zero, then A is singular, which means that A is not invertible.

This is because the determinant of a matrix represents the scaling factor of the transformation that the matrix represents. If the determinant is zero, it means that the transformation does not preserve the orientation of space and therefore does not have an inverse transformation.

In the case of A^3, the determinant of A^3 is equal to the cube of the determinant of A. Therefore, if det(A^3) = 0, then det(A)^3 = 0, which implies that det(A) = 0. Hence, A is singular and cannot be invertible.

Geometrically, this means that the transformation represented by A^3 collapses the space onto a lower-dimensional subspace, such as a line or a plane, and does not have an inverse that can restore the original space. Therefore, the linear system represented by A^3 is dependent, and the columns of A^3 do not span the full space.

In summary, if det(A^3) = 0, then A is not invertible because the transformation represented by A^3 collapses the space onto a lower-dimensional subspace and does not have an inverse transformation that can restore the original space.

Learn more about invertible here:

https://brainly.com/question/30453255

#SPJ11

The equation of the elipse in the graph is the one in option B.

x²/3² + y²/2² = 1

Here we can see the graph of an elipse.

Now, if we define a as the horizontal distance between the center and the edge.

b as the vertical distance between the center and the edge,

(h, k) as the center of the elipse.

Then the equation is:

(x - h)²/a² + (y - k)²/b² = 1

First, notice that the center is at (0, 0).

Also the vertical distance to the edge is 2 units, and the horizontal distance to the edge is 3 units, then the equation for the elipse is:

x²/3² + y²/2² = 1

So the correct option is B

Learn more about elipses:

https://brainly.com/question/16904744

#SPJ1

In a simple linear regression based on 44 observations,the s2e and se values are 58.59 and 7.65, respectively. The coefficient of determination R2 is 0.8734.

a. To calculate s2e (the mean squared error) and se (the standard error), we use the formulas:

s2e = SSE / (n - 2) = 2,578 / (44 - 2) = 58.59

se = √(s2e) = √(58.59) = 7.65

b. The coefficient of determination R2 is given by:

R2 = 1 - (SSE / SST) = 1 - (2,578 / 20,343) = 0.8734

Therefore, the s2e and se values are 58.59 and 7.65, respectively. The coefficient of determination R2 is 0.8734.

For more questions like Regression click the link below:

https://brainly.com/question/28178214

#SPJ11

The solution to the first-order differential equation y' = 2y^3/x^2 is y = ±√(x/(4 - 2C1x)), where C1 is the constant of integration.

To solve the first-order differential equation y' = 2y^3/x^2, we can separate the variables and integrate both sides.

Start by rearranging the equation to isolate the variables:

dy/y^3 = 2/x^2 dx

Now, we can integrate both sides:

∫(dy/y^3) = ∫(2/x^2) dx

Integrating the left side:

∫(dy/y^3) = ∫2/x^2 dx

-1/(2y^2) = -2/x + C1

Multiplying both sides by -1/2:

1/(2y^2) = 2/x - C1

To simplify, we can take the reciprocal of both sides:

2y^2 = 1/(2/x - C1)

2y^2 = x/(4 - 2C1x)

Now, solve for y:

y^2 = x/(4 - 2C1x)

y = ±√(x/(4 - 2C1x))

So, the solution to the first-order differential equation y' = 2y^3/x^2 is y = ±√(x/(4 - 2C1x)), where C1 is the constant of integration.

learn more about "integration":- https://brainly.com/question/22008756

#SPJ11

Answer:

--------------------

After using 2 9/12 yards she has:

To subtract the mixed numbers, first subtract the whole numbers:

Then, subtract the fractions:

Finally, combine the whole number and fraction:

The surface area of the gift (cube shaped) with a side length of 12 inches indicates that the amount of wrapping paper that Mrs. Hendren need to purchase is therefore;

A cube is a square based prism, with six congruent square faces, and in which the adjacent faces are perpendicular and the frontal faces are parallel.

The side length of the cube shaped box, s = 12 inches

The surface area of the a cube = 6 × s²

The surface area, A, of the cube shaped gift box Mrs. Hendren intends to wrap  for her daughter is therefore;

A = 6 × (12 in)² =  864 in²

Amount of wrapping paper Mrs. Hendren used = 578 square inches

The amount of more wrapping paper she needs = 864 - 578  = 286

The amount of wrapping paper Mrs. Hendren needs to purchase therefore is; 286 square inches

Learn more on the surface area of a cube here: https://brainly.com/question/1317476

#SPJ1

The phasor form of a sinusoid represents the amplitude and phase angle of the sinusoid in complex number notation. In this case, the phasor form of [tex]8 sin(20t 57)[/tex] would be 8 ∠57°. The amplitude, 8, is the magnitude of the complex number, and the phase angle, 57°, is the angle of the complex number in the complex plane.

In terms of amplitude and phase angle, a sinusoidal waveform is mathematically represented in phasor form. Electrical engineering frequently employs it to depict AC (alternating current) circuits and signals. A complex number that depicts the magnitude and phase of a sinusoidal waveform is called a phasor. The phase angle is represented by the imaginary component of the phasor, whereas the real part of the phasor represents the waveform's amplitude. Complex algebra can be used to analyse AC circuits using the phasor form, which makes computations simpler and makes it simpler to see how the circuit behaves.

Learn more about phasor here:
https://brainly.com/question/22970717

#SPJ11

Option C Ill only is the right option

Let's analyze each option one by one:

I. arccos(sins):

The range of the arcsine function is [-π/2, π/2], and the range of the cosine function is [0, π].

Since the arcsine of any value is always between -π/2 and π/2, it is not possible to have a value outside that range. Therefore, arccos(sins) is not a valid expression.

II. ectan(cot(-7)):

The tangent function has a period of π, which means tan(x) = tan(x + π) for any value of x.

Therefore, tan(-7) is the same as tan(-7 + π) = tan(-7 + 3.14...) = tan(-3.14...), which is defined and equal to 0.

Since the cotangent is the reciprocal of the tangent, cot(-7) = 1/tan(-7) = 1/0, which is undefined. Thus, ectan(cot(-7)) is not a valid expression.

III. arcsin(csc):

The cosecant function (csc) is the reciprocal of the sine function, so csc(x) = 1/sin(x).

The arcsine function (arcsin) is the inverse of the sine function, so arcsin(sin(x)) = x for any x within the range of the arcsin function.

Therefore, arcsin(csc) simplifies to arcsin(1/sin), and since these functions are inverses of each other, arcsin(1/sin) = x.

The value of x depends on the specific value of sin, which is not provided.

Therefore, arcsin(csc) is a valid expression, but we cannot determine a specific value without knowing the value of sin.

Therefore, the correct answer is C. III only.

Learn more about trigonometric expressions

brainly.com/question/11659262

#SPJ11