The statement that is not true of primary batteries is:
The size of the battery has no influence on the voltage delivered.
This statement is false because the voltage delivered by a primary battery is directly proportional to its size. The larger the battery, the greater the number of electrochemical cells it contains, and the greater the voltage it can deliver.
For example, a typical AA alkaline battery has a voltage of 1.5 volts, while a D alkaline battery has a voltage of 1.5 x 2 = 3 volts, because it contains two AA cells. Similarly, a 9-volt battery contains six smaller cells that are connected in series to deliver a total voltage of 9 volts.
The other statements are true of primary batteries. The size of the battery does affect the number of moles of electrons delivered at a given time (statement 1), and alkaline batteries can deliver more energy than zinc-carbon dry cells of similar size (statement 3).
Specifically, alkaline batteries can deliver about three to five times the energy of a zinc-carbon dry cell of similar size, not thirty to fifty times as stated in statement 3.
For more question on batteries click on
https://brainly.com/question/26466203
#SPJ11
determine the standard cell potential, ∘cell, for the following reaction. standard reduction potentials may be found on‑line here or in appendix b on pp. 255–257 of the textbook.
Cu(s) + Ag^+ (aq) --> cu^+ (aq) + Ag(s)
Eceh=
The standard cell potential, ∘cell, for the given reaction is +0.28 V.
To determine the standard cell potential, ∘cell, for the given reaction, we need to use the standard reduction potentials of Cu and Ag ions. From the online source or Appendix B of the textbook, we find that the standard reduction potentials are:
Cu^+ + e^- → Cu(s) E°red = +0.52 V
Ag^+ + e^- → Ag(s) E°red = +0.80 V
The reduction potential of Cu is less positive than that of Ag, indicating that Cu ions have a lower tendency to gain electrons and Ag ions have a higher tendency to lose electrons. Therefore, Ag^+ is reduced and Cu is oxidized.
Now, we can use the equation:
E°cell = E°red (reduction) - E°red (oxidation)
E°cell = E°red (Ag^+ + e^- → Ag(s)) - E°red (Cu(s) → Cu^+ + e^-)
E°cell = (+0.80 V) - (+0.52 V)
E°cell = +0.28 V
The positive value of ∘cell indicates that the reaction is spontaneous in the forward direction. The reduction of Ag^+ is favored over the reduction of Cu^+ and hence Ag will be reduced while Cu will be oxidized.
To know more about standard cell potential visit:
https://brainly.com/question/29653954
#SPJ11
a normalized valence bond wabe function turned out to have the form what is the chance that in 1000 inspection os of the molecule, both electrons of the bond will be found on one atom
The chance of both electrons being found on one atom cannot be determined without the specific form of the normalized valence bond wave function. More information is required to calculate the probability.
To determine the chance that both electrons of the bond will be found on one atom during 1000 inspections, we need to know the specific form of the normalized valence bond wave function. This function describes the electron distribution in the molecule and is crucial for calculating probabilities related to electron positions. Once we have the wave function, we can square its amplitude to find the probability density for a particular electron configuration.
Then, we can use this probability to determine the chance of observing both electrons on one atom during 1000 inspections. Unfortunately, without the form of the wave function, it's impossible to provide an accurate probability for this scenario.
To know more about the electrons visit:
https://brainly.com/question/30025165
#SPJ11
1 1 point Arrange the compounds in order of increasing number of hydrogen atoms/ions per formula unit. fewest 1 1 barium hydroxide i 2 ammonium carbonate 3 ammonium chlorate 4 lithium hydride C greatest Next
The compounds arranged in order of increasing number of hydrogen atoms/ions per formula unit are 1. Lithium hydride
2. Barium hydroxide , 3. Ammonium carbonate , 4. Ammonium chlorate.
Lithium hydride (LiH) has one hydrogen atom per formula unit.
Barium hydroxide ([tex]Ba(OH)_2[/tex]) has two hydrogen atoms per formula unit.
Ammonium carbonate (([tex]NH_4)2CO_3[/tex]) has four hydrogen atoms per formula unit, as there are two ammonium ions, each containing one hydrogen ion, and one carbonate ion, containing two hydrogen ions.
Ammonium chlorate ([tex]NH_4ClO_3[/tex]) has five hydrogen atoms per formula unit, as there is one ammonium ion containing one hydrogen ion, and one chlorate ion containing three hydrogen ions.
Therefore, the correct order from fewest to greatest number of hydrogen atoms/ions per formula unit is:
Lithium hydride < Barium hydroxide < Ammonium carbonate < Ammonium chlorate
To know more about hydrogen refer here :
https://brainly.com/question/24433860
#SPJ11
consider the reaction 5br−(aq) bro−3(aq) 6h (aq)→3br2(aq) 3h2o(aq). if [br-] is decreasing at 0.11 m/s, how fast is [br2] increasing?
Therefore, the speed at which [Br2] is increasing is 0.066 m/s.
To solve this problem, we need to use the rate of reaction formula, which is:
Rate of reaction = (1/coeff. of reactant) x (d[reactant]/dt) = (1/coeff. of product) x (d[product]/dt)
Here, the coefficient of Br- is 5 and the coefficient of Br2 is 3. Therefore,
(d[Br2]/dt) = (3/5) x (-d[Br-]/dt)
Substituting the given value of d[Br-]/dt as -0.11 m/s, we get:
(d[Br2]/dt) = (3/5) x (0.11) = 0.066 m/s
The negative sign indicates that the concentration of Br- is decreasing, and the positive sign of the rate of [Br2] indicates that its concentration is increasing. The reaction involves the conversion of Br- to Br2, so as Br- concentration decreases, the Br2 concentration increases.
To know more about reaction visit:
https://brainly.com/question/29762834
#SPJ11
a strip of solid silver metal is put into a beaker of 0.083m fe(no3)2 solution.
When a strip of solid silver metal is put into a beaker of 0.083m Fe(NO3)2 solution, a reaction takes place between the two substances. The silver metal will start to dissolve in the solution, and the Fe(NO3)2 solution will start to turn a different color due to the formation of a new chemical compound.
The beaker in which this reaction takes place must be made of a material that can withstand the chemical reaction. Glass beakers are a common choice for this type of reaction because they are solid and can withstand the heat and pressure that can be generated during the reaction.
In order to fully understand the reaction between the silver metal and the Fe(NO3)2 solution, it is important to study the chemical properties of each substance. Solid silver metal is a good conductor of heat and electricity, and is known for its shiny and reflective appearance. Fe(NO3)2 solution, on the other hand, is a clear and colorless liquid that is used in various industrial applications.
Overall, the reaction between a strip of solid silver metal and a beaker of 0.083m Fe(NO3)2 solution is a complex process that requires careful observation and analysis. By understanding the chemical properties of each substance and the potential reactions that can occur, scientists can gain valuable insights into the world of chemistry.
To know more about beakers visit:
https://brainly.com/question/29475799
#SPJ11
what is the volume of 25 grams of o2 at 2.5 atmospheres and 25°c?
The volume of 25 grams of O2 at 2.5 atmospheres and 25°C is 8.06 L.
To solve this problem, we will use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. We can rearrange the equation to solve for volume: V = nRT/P
First, we need to calculate the number of moles of O2. We can use the molar mass of O2 to convert the given mass to moles: moles O2 = 25 g / 32 g/mol = 0.78125 moles
Next, we need to convert the temperature to Kelvin: T = 25°C + 273.15 = 298.15 K
Now we can plug in the values for n, R, P, and T into the equation to find the volume: V = (0.78125 moles)(0.08206 L·atm/mol·K)(298.15 K)/(2.5 atm) = 8.06 L
Therefore, the volume of 25 grams of O2 at 2.5 atmospheres and 25°C is 8.06 L.
To know more about volume, refer here:
https://brainly.com/question/3134584#
#SPJ11
according to the given equation how many moles of H2 are required to react with 3.2 moles Cl2?
H2 + Cl2 = 2HCl
3.2 moles of H2 are required to react with 3.2 moles of Cl2 according to the balanced chemical equation H2 + Cl2 = 2HCl.
According to the balanced chemical equation you provided (H2 + Cl2 = 2HCl), one mole of hydrogen gas (H2) reacts with one mole of chlorine gas (Cl2) to produce two moles of hydrogen chloride (HCl). In order to determine how many moles of H2 are required to react with 3.2 moles of Cl2, we can use the stoichiometric coefficients from the balanced equation.
Since the stoichiometric ratio between H2 and Cl2 is 1:1, we can conclude that for every mole of Cl2, one mole of H2 is needed. Therefore, to react with 3.2 moles of Cl2, you would require 3.2 moles of H2.
In summary, 3.2 moles of H2 are required to react with 3.2 moles of Cl2 according to the balanced chemical equation H2 + Cl2 = 2HCl.
learn more about chemical
https://brainly.com/question/11850086
#SPJ11
Write a balanced chemical reaction, complete ionic equation and net ionic equation for the following equations
I apologize, but you haven't provided any specific chemical equations for me to generate the balanced chemical reaction, complete ionic equation, and net ionic equation. Please provide the specific chemical equation you would like me to work with.
#SPJ11
Complete question
Select the substrate atom that changes its oxidation state during the reaction catalyzed by glyceraldehyde-3-phosphate dehydrogenase. • Gray = C; white = H; red = 0; blue=N; dark green = Cl; brown Br: light green F purple = 1; yellow=S; orange = P. • Double click to select atoms.
The reaction catalyzed by GAPDH involves the oxidation of G3P and the reduction of NAD⁺, resulting in the formation of 1,3-BPG and NADH.
Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) is an enzyme that plays a key role in the glycolytic pathway, which is the process by which glucose is metabolized to produce energy in the form of ATP.
In the glycolytic pathway, glyceraldehyde-3-phosphate (G3P) is a substrate molecule that undergoes oxidation to produce 1,3-bisphosphoglycerate (1,3-BPG) and a reduced form of nicotinamide adenine dinucleotide (NADH). This reaction is catalyzed by GAPDH and involves a series of chemical transformations that result in the conversion of G3P to 1,3-BPG.
During this reaction, the carbon atom at position 1 of the G3P molecule changes its oxidation state from an aldehyde group (-CHO) to a carboxylic acid group (-COOH). This change in oxidation state is due to the transfer of electrons from the aldehyde group to NAD⁺, which is reduced to NADH.
The reaction proceeds in two steps, with the first step involving the formation of a thiohemiacetal intermediate between G3P and a cysteine residue in the active site of GAPDH. In the second step, the thiohemiacetal intermediate is oxidized by the transfer of a hydride ion (H⁻) to NAD⁺, resulting in the formation of 1,3-BPG and NADH.
Overall, the reaction catalyzed by GAPDH involves the oxidation of G3P and the reduction of NAD⁺, resulting in the formation of 1,3-BPG and NADH. The carbon atom at position 1 of the G3P molecule changes its oxidation state during this reaction, from an aldehyde group to a carboxylic acid group, as a result of the transfer of electrons to NAD⁺.
To know more about reaction, refer to the link below:
https://brainly.com/question/31075656#
#SPJ11
Identify the compound with the largest dipole moment in the gas phase.
a. Cl2
b. NaBr
c. HCI
d. CCl4
e. BrF
The compound with the largest dipole moment in the gas phase is option c, HCI. This is because HCI is a polar molecule with a permanent dipole moment due to the electronegativity difference between hydrogen and chlorine.
The other compounds, Cl2, NaBr, CCl4, and BrF, are either nonpolar or have smaller dipole moments. Therefore, the main ans is option c, HCI. A dipole moment occurs when there is a separation of charge in a molecule due to the difference in electronegativity between the atoms.
The compound with the largest dipole moment will have the greatest difference in electronegativity between its atoms. Cl2 - This molecule is composed of two identical atoms, so there is no electronegativity difference and no dipole moment. NaBr - Although this compound has a significant difference in electronegativity, it is an ionic compound and doesn't form a dipole moment in the gas phase. HCl - This molecule has a significant difference in electronegativity and forms a dipole moment. However, there are stronger options.
To know more about hydrogen visit :
https://brainly.com/question/28937951
#SPJ11
An aqueous solution containing 5% by weight of urea and 10% by weight of glucose. What will be its freezing point (Kf=1.86 Kkgmol−).
The freezing point of the solution will be lowered by approximately 0.21°C compared to pure water.
The freezing point depression of a solution depends on the molality of the solute particles in the solution.
To calculate the molality of the solution, we need to convert the weight percentages to mole fractions.
The molar masses of urea and glucose are 60.06 g/mol and 180.16 g/mol, respectively.
The mole fraction of urea = (5 g / 60.06 g/mol) / [(5 g / 60.06 g/mol) + (10 g / 180.16 g/mol)] = 0.151
The mole fraction of glucose = (10 g / 180.16 g/mol) / [(5 g / 60.06 g/mol) + (10 g / 180.16 g/mol)] = 0.849
The molality of the solution = (0.151 mol / 0.1 kg) + (0.849 mol / 0.1 kg) = 10 mol/kg
The freezing point depression, ΔTf, of the solution is given by ΔTf = Kf x molality x i, where i is the van't Hoff factor.
The van't Hoff factor for both urea and glucose is 1.
Therefore, ΔTf = 1.86 Kkgmol−1 x 10 mol/kg x 1 = 18.6 K
The freezing point of pure water is 0°C or 273.15 K. So, the freezing point of the solution will be lowered by approximately 18.6/1.86 = 10°C or 0.21°C compared to pure water
For more such questions on freezing, click on:
https://brainly.com/question/24314907
#SPJ11.
the freezing point of the solution containing 5% by weight of urea and 10% by weight of glucose is -3.37°C.
To calculate the freezing point of the solution, we can use the equation:
ΔTf = Kf·m
where ΔTf is the freezing point depression, Kf is the freezing point depression constant (1.86 K·kg/mol for water), and m is the molality of the solution.
First, we need to calculate the molality of the solution. Molality is defined as the number of moles of solute per kilogram of solvent, so we need to determine the masses of urea and glucose and the mass of water.
Assuming we have 100 g of solution, the mass of urea is 5 g and the mass of glucose is 10 g. The mass of water is therefore:
100 g - 5 g - 10 g = 85 g
The number of moles of each solute can be calculated using their molecular weights:
nurea = 5 g / 60.06 g/mol = 0.0832 mol
nglucose = 10 g / 180.16 g/mol = 0.0555 mol
The molality of the solution can be calculated as:
molality = (0.0832 mol + 0.0555 mol) / 0.085 kg = 1.81 mol/kg
Now we can use the freezing point depression equation to calculate the freezing point of the solution:
ΔTf = Kf·m = (1.86 K·kg/mol) · (1.81 mol/kg) = 3.37 K
The freezing point of pure water is 0°C (273.15 K), so the freezing point of the solution will be:
0°C - 3.37 K = -3.37°C
learn more about freezing point of the solution here:
https://brainly.com/question/31357864
#SPJ11
draw a balanced chemical equation for the reaction. include drawings of the stuctures of the reactant and both possible isomers of the product (e,z and e,e).
I can provide a balanced chemical equation.The balanced chemical equation for the reaction is:
Reactant: A + B
Product (E,Z isomer): C
Product (E,E isomer): D
Can you provide a balanced chemical equation and describe the structures of the reactant and product isomers?However, I can provide you with a balanced chemical equation and describe the structures in words.
The balanced chemical equation for the reaction is:
Reactant: A + B
Product (E,Z isomer): C
Product (E,E isomer): D
In words, the reaction involves the reactants A and B combining to form two different products. One product is the E,Z isomer, denoted as C, and the other product is the E,E isomer, denoted as D.
The structures of the reactants and products would need to be represented using appropriate chemical diagrams or models to illustrate their specific configurations.
Learn more about balanced chemical equation
brainly.com/question/29130807
#SPJ11
5. An important theme in Biochemistry is interaction among metabolic pathways. What pathway would obviously be most affected by increased beta-oxidation of fatty acids? A. Glycolysis B. Kreb's Cycle C. Glyoxylate D. Pentose Phosphate E. Gluconeogenesis 6. What is the potential ATP yield from complete oxidation of Stearic acid (18:0)? (Use the P/O ratio: 1 NADH = 2.5 ATP, 1 FADH2 = 1.5 ATP). A. 54 B. 96 C. 108 D. 122 E. 244
The pathway that would be most affected by increased beta-oxidation of fatty acids is gluconeogenesis.
Determine the oxidation of stearic acid?The potential ATP yield from the complete oxidation of stearic acid (18:0) can be calculated by considering the number of NADH and FADH2 molecules generated during beta-oxidation.
Stearic acid (18:0) has 9 beta-oxidation cycles, each producing 1 NADH and 1 FADH2 molecule. Therefore, we have a total of 9 NADH and 9 FADH2 molecules.
Using the given P/O ratios of 1 NADH = 2.5 ATP and 1 FADH2 = 1.5 ATP, we can calculate the ATP yield as follows:
ATP yield = (9 NADH * 2.5 ATP/NADH) + (9 FADH2 * 1.5 ATP/FADH2) = 22.5 ATP + 13.5 ATP = 36 ATP.
Therefore, the potential ATP yield from the complete oxidation of stearic acid (18:0) is 36 ATP (option B).
To know more about stearic acid, refer here:
https://brainly.com/question/30463306#
#SPJ4
calculate the solubility in g/l of agbr in (a) pure water and (b) 0.0019 m nabr.
The solubility of AgBr in pure water is (a) 0.00034 g/L. (b) The solubility of AgBr in 0.0019 M NaBr is 1.6 x 10⁻⁷ g/L.
(a) The solubility of a compound depends on its ionic strength and the nature of the solvent. In pure water, AgBr partially dissolves according to the equation AgBr(s) ⇌ Ag⁺(aq) + Br⁻(aq).
The solubility product expression for AgBr is given by Ksp = [Ag⁺][Br⁻]. At equilibrium, the concentration of AgBr is equal to its solubility (S), and the concentration of Ag⁺ and Br⁻ ions are equal to S.
Substituting these values in the Ksp expression, we get Ksp = S², and solving for S gives S = sqrt(Ksp). Therefore, the solubility of AgBr in pure water is S = sqrt(7.7 x 10⁻¹³) = 0.00034 g/L.
In the presence of NaBr, AgBr dissolves according to the equation AgBr(s) + Na⁺(aq) + Br⁻(aq) ⇌ NaAgBr₂(aq). The addition of Na⁺ and Br⁻ ions from NaBr increases the ionic strength of the solution, which decreases the solubility of AgBr.
(b) The solubility of AgBr in the presence of NaBr can be calculated using the common ion effect. The concentration of Br⁻ ion from NaBr is 0.0019 M, and the concentration of Ag⁺ ion from AgBr is negligible compared to Na⁺ concentration.
Therefore, we can assume that the concentration of Br⁻ ion is constant and subtract it from the solubility product expression for AgBr. The new expression is Ksp = [Ag⁺][Br⁻] - S[Br⁻]. Solving this expression for S gives S = Ksp/[Br⁻] = 1.6 x 10⁻⁷ g/L.
To know more about ionic strength, refer here:
https://brainly.com/question/28145535#
#SPJ11
If the temperature of the copper was instead 1350 k, it would cause the water to boil. how much liquid water (latent heat of vaporization = 2.26 × 10^6 j/kg) will be left after the water stops boiling?
If the temperature of copper reaches 1350 K, it will cause the water to boil and convert into steam. Approximately 0.787 kg of liquid water will be left after the water stops boiling.
To calculate the amount of liquid water left after the water stops boiling, we need to determine the amount of heat required to vaporize the water.
The heat required to vaporize water can be calculated using the formula:
Q = mL
where
Q is the heat required,
m is the mass of water, and
L is the latent heat of vaporization.
Let's assume that the initial mass of water is 1 kg. At 100°C, the heat required to vaporize 1 kg of water is:
Q = 1 kg x 2.26 x 10⁶ J/kg
= 2.26 x 10⁶ J
Now, to calculate the amount of liquid water left after the water stops boiling, we need to determine how much heat is available after the copper has cooled down from 1350 K to 100°C.
The specific heat capacity of copper is 0.385 J/g·K. Let's assume the mass of the copper is 1 kg.
The amount of heat lost by the copper can be calculated using the formula:
Q = m x c x ΔT
where
m is the mass of the copper,
c is the specific heat capacity, and
ΔT is the change in temperature.
The change in temperature is:
ΔT = 1350 K - 100°C
= 1250 K
Substituting the values, we get:
Q = 1 kg x 0.385 J/g·K x 1250 K
= 481.25 kJ
Therefore, the amount of heat available to vaporize water is:
Q_available = Q_lost
= 481.25 kJ
The amount of water that can be vaporized is:
m = Q_available / L
= 481.25 x 10³ J / 2.26 x 10⁶ J/kg
= 0.213 kg
So, the amount of liquid water left after the water stops boiling is:
1 kg - 0.213 kg = 0.787 kg
Therefore, approximately 0.787 kg of liquid water will be left after the water stops boiling.
To know more about latent heat refer here
brainly.com/question/28044951#
#SPJ11
The reaction of magnesium with nitrogen produces magnesium nitride, as follows.
3 Mg(s) + N2(g) → Mg3N2(s)
If the reaction is started with 2.05 mol Mg and 0.891 mol N2, find the following.
(a) the limiting reactant (b) the excess reactant (c) the number of moles of magnesium nitride produced
(a) The limiting reactant is Mg.
(b) The excess reactant is N₂
(c) The number of moles of magnesium nitride produced is 0.683 moles.
(a) To find the limiting reactant, we first need to determine the mole ratio of Mg to N₂ in the balanced equation, which is 3:1. Next, divide the given moles of each reactant by their respective stoichiometric coefficients:
Mg: 2.05 mol / 3 = 0.683
N₂: 0.891 mol / 1 = 0.891
Since 0.683 is smaller than 0.891, Mg is the limiting reactant.
(b) The excess reactant is the other reactant, which is N₂ in this case.
(c) To find the number of moles of magnesium nitride (Mg₃N₂) produced, we use the mole ratio between Mg and Mg₃N₂, which is 3:1. Since Mg is the limiting reactant, we have:
Moles of Mg₃N₂ = (1 mol Mg₃N₂ / 3 mol Mg) × 2.05 mol Mg = 0.683 mol Mg₃N₂
So, 0.683 moles of magnesium nitride are produced in the reaction.
Learn more about limiting reactant here: https://brainly.com/question/26905271
#SPJ11
calculate the number of molecules of acetyl-scoa derived from a saturated fatty acid with 18 carbon atoms.
The beta-oxidation of an 18-carbon saturated fatty acid generates 9 acetyl-CoA molecules. This process is essential for energy production, as acetyl-CoA can be further metabolized in the citric acid cycle, also known as the Krebs cycle, to produce ATP.
To calculate the number of molecules of acetyl-CoA derived from a saturated fatty acid with 18 carbon atoms, we need to understand the biochemical process of fatty acid oxidation, also known as beta-oxidation. In this process, the fatty acid is broken down into two-carbon units, which form acetyl-CoA molecules.
Step 1: Determine the number of carbon atoms in the fatty acid.
The given saturated fatty acid has 18 carbon atoms.
Step 2: Determine the number of two-carbon units.
Since each acetyl-CoA molecule consists of two carbon atoms, we can find the number of two-carbon units by dividing the total number of carbon atoms by 2:
18 carbon atoms / 2 = 9 two-carbon units.
Step 3: Calculate the number of acetyl-CoA molecules.
As each two-carbon unit forms one acetyl-CoA molecule, the number of acetyl-CoA molecules derived from the 18-carbon saturated fatty acid is equal to the number of two-carbon units. Therefore, there are 9 acetyl-CoA molecules derived from this fatty acid.
To learn more about beta-oxidation, refer:-
https://brainly.com/question/29458295
#SPJ11
Considering the limiting reactant concept, how many moles of C are produced from the reaction of 2.00 mole A and 4.50 mole B?
A(g) + 3B(g) -----> 2C(g)
Considering the limiting reactant concept, from the given reaction, 3.00 moles of C will be produced when 2.00 moles of A and 4.50 moles of B react.
To determine the moles of C produced from the reaction of 2.00 moles of A and 4.50 moles of B, we need to identify the limiting reactant. The limiting reactant is the one that is completely consumed and determines the maximum amount of product that can be formed.
First, we need to determine the stoichiometric ratio between A, B, and C based on the balanced equation. From the balanced equation:
1 mole of A reacts with 3 moles of B to produce 2 moles of C.
Now, we can calculate the moles of C produced by comparing the moles of A and B:
For A, we have 2.00 moles.
For B, we have 4.50 moles.
To find the limiting reactant, we compare the moles of each reactant with their respective stoichiometric ratios in the balanced equation.
For A:
2.00 moles A * (3 moles B / 1 mole A) = 6.00 moles B required
For B:
4.50 moles B * (1 mole A / 3 moles B) = 1.50 moles A required
Based on the calculations, we see that we need 6.00 moles of B to react with 2.00 moles of A. However, we only have 4.50 moles of B available. This means that B is the limiting reactant, as it will be completely consumed before A.
Since 2 moles of C are produced for every 3 moles of B, and we have 4.50 moles of B, we can calculate the moles of C produced:
4.50 moles B * (2 moles C / 3 moles B) = 3.00 moles C
Therefore, from the given reaction, 3.00 moles of C will be produced when 2.00 moles of A and 4.50 moles of B react.
Learn more about limiting reactant here:
https://brainly.com/question/19031443
#SPJ11
a 10 gram sample of which substance contains the greatest number of hydrogen atoms? data sheet and periodic table 10 grams of ch4 10 grams of hcl 10 grams of h2 10 grams of ph3
Answer:
H2
Explanation:
Calculate using the Avogadro's number
We have found that [tex]H_2[/tex] (10 grams) contains the greatest number of hydrogen atoms.
How do we calculate?The molar mass for every substance i:
for [tex]CH_4[/tex]: 12.01 g/mol (carbon) + 4 * 1.01 g/mol (hydrogen) = 16.05 g/molfor HCl: 1.01 g/mol (hydrogen) + 35.45 g/mol (chlorine) = 36.46 g/molfor [tex]H_2[/tex]: 2 * 1.01 g/mol (hydrogen) = 2.02 g/molfor [tex]PH_3[/tex]: 30.97 g/mol (phosphorus) + 3 * 1.01 g/mol (hydrogen) = 33.02 g/molWe find the Number of moles of each substance as well
= mass (g) / molar mass (g/mol)
For [tex]CH_4[/tex]:Number of moles = 10 g / 16.05 g/mol
Number of moles[= 0.623 moles
For HCl:Number of moles = 10 g / 36.46 g/mol
Number of moles = 0.274 moles
For [tex]H_2[/tex]:Number of moles = 10 g / 2.02 g/mol
Number of moles = 4.95 moles
For [tex]PH_3[/tex]:Number of moles = 10 g / 33.02 g/mol
Number of moles = 0.303 moles
Now, let's consider the stoichiometry to determine the number of hydrogen atoms in each substance:
For [tex]CH_4[/tex], there is 1 hydrogen atom per molecule.
For HCl, there is 1 hydrogen atom per molecule.
For [tex]H_2[/tex], there are 2 hydrogen atoms per molecule.
For [tex]PH_3[/tex], there are 3 hydrogen atoms per molecule.
We then find the total hydrogen atom in each substance and compare with other each other.
[tex]H_2[/tex] has the greatest number of hydrogen atoms,.
Learn more about Number of moles at:
https://brainly.com/question/15356425
#SPJ4
What properties are not usually exhibited by solid ionic compounds? Check all possible answers. high volatility high melting point strong bonds between ions good conductivity
The properties that are not usually exhibited by solid ionic compounds are high volatility and good conductivity.
Ionic compounds have strong electrostatic bonds between ions, which results in their high melting points. This means that they require a lot of energy to break the bonds and transition from a solid state to a liquid state, making them generally not volatile. Additionally, ionic compounds do not conduct electricity well as solids, as their ions are not free to move and carry a charge.
However, when melted or dissolved in water, the ions become mobile and can conduct electricity. Therefore, high volatility and good conductivity are not typical properties of solid ionic compounds. The properties not usually exhibited by solid ionic compounds are high volatility and good conductivity.
To know more about ionic compounds visit:
https://brainly.com/question/3222171
#SPJ11
8. The error mentioned in question number 7 causes the volume of water in the kernel to be: a. overestimated b. underestimated Therefore, the ultimate calculation of pressure is: a. overestimated b. underestimated
When a solid is dissolved in water inside a eudiometer tube, the volume of water in the tube is overestimated due to the increase in the total volume of the solution.
As a result, the pressure inside the eudiometer tube is underestimated because the calculated pressure is based on the assumption that the volume of water is equal to the original volume before the solid was dissolved. However, the actual volume is higher due to the added volume of the solid, leading to a lower pressure reading than expected. Therefore, it is important to consider the change in volume when calculating the pressure inside the eudiometer tube to obtain accurate results.
To know more about eudiometer tube, here
brainly.com/question/30784273
#SPJ4
--The complete Question is, When a solid is dissolved in water inside a eudiometer tube, it causes the volume of water in the tube to be overestimated. How does this affect the calculation of pressure inside the eudiometer tube? Is the pressure overestimated or underestimated as a result?--
rank the nitrogen atoms in isoniazid in order of increasing basicity. isoniazid is a drug used to treat tuberculosis.
The ranking of nitrogen atoms in isoniazid in order of increasing basicity Pyridine nitrogen < Hydrazide nitrogen < Amino nitrogen
Isoniazid (C6H7N3O) has three nitrogen atoms in its structure:
1. Nitrogen in the hydrazide group (-NH-NH2) - This nitrogen is bonded to another nitrogen and a hydrogen atom. It has one lone pair of electrons.
2. Nitrogen in the amino group (-NH2) - This nitrogen is bonded to two hydrogen atoms and is part of the hydrazide group. It also has one lone pair of electrons.
3. Nitrogen in the pyridine ring - This nitrogen is part of an aromatic ring and has one lone pair of electrons.
To rank them in order of increasing basicity, we need to consider their electron availability for accepting protons (H+ ions). The more available the electrons, the more basic the nitrogen.
1. Nitrogen in the amino group (-NH2) - As it is bonded to two hydrogen atoms and is not part of an aromatic system, its lone pair of electrons is more available, making it the most basic nitrogen.
2. Nitrogen in the hydrazide group (-NH-NH2) - Although it is bonded to another nitrogen, its lone pair of electrons is still relatively available compared to the pyridine nitrogen. Thus, it is the second most basic nitrogen.
3. Nitrogen in the pyridine ring - As part of the aromatic ring, its lone pair of electrons participates in resonance, making it less available for accepting protons. This nitrogen is the least basic.
So, the ranking of nitrogen atoms in isoniazid in order of increasing basicity is:
Pyridine nitrogen < Hydrazide nitrogen < Amino nitrogen
For more questions on basicity:
https://brainly.com/question/172153
#SPJ11
The nitrogen atoms in isoniazid can be ranked in order of increasing basicity as follows: N3 < N4 < N1 < N2.
In isoniazid, there are four nitrogen atoms. Nitrogen atoms are basic because they have a lone pair of electrons that can accept a proton. The basicity of a nitrogen atom depends on several factors, including the electronegativity of the atoms it is attached to and the steric hindrance around the atom.
In isoniazid, the nitrogen atom at position 3 (N3) is the least basic because it is attached to two carbon atoms, which are more electronegative than hydrogen. The nitrogen atom at position 4 (N4) is also attached to two carbon atoms but is slightly more basic than N3 because it is further away from the electron-withdrawing carbonyl group.
The nitrogen atom at position 1 (N1) is attached to a hydrogen atom and a carbon atom, making it more basic than N3 and N4. Finally, the nitrogen atom at position 2 (N2) is attached to two hydrogen atoms, making it the most basic nitrogen atom in isoniazid.
Therefore, the increasing order of basicity of nitrogen atoms in isoniazid is N3 < N4 < N1 < N2.
Learn more about basicity here :
brainly.com/question/172153
#SPJ11
Calculate the solubility of AgCl(s) in 1.5 M NH3(aq).
Ksp = 1.6 × 10-10 for AgCl
Kf = 1.7 × 107 for Ag(NH3)2+(aq)
1.3 × 10-5 M
5.2 × 10-2 M
4.1 × 10-3 M
1.9 × 10-5 M
7.1 × 10-2 M
The solubility of AgCl(s) in 1.5 M [tex]NH_{3}[/tex](aq) is [tex]2.63 *10^{-6} M[/tex]
The solubility of AgCl(s) in 1.5 M [tex]NH_{3}[/tex]aq) can be calculated using the following steps:
Step 1: Write the balanced chemical equation for the dissolution of AgCl(s) in [tex]NH_{3}[/tex](aq).
AgCl(s) + 2 [tex]NH_{3}[/tex](aq) ⇌ Ag([tex]NH_{3}[/tex])2+(aq) + Cl-(aq)
Step 2: Write the expression for the equilibrium constant (Ksp) for the dissolution of AgCl(s).
Ksp = [Ag+][Cl-] = 1.6 × [tex]10^{-10}[/tex]
Step 3: Write the expression for the equilibrium constant (Kf) for the complex ion formation of Ag([tex]NH_{3}[/tex])2+(aq).
Kf = [Ag([tex]NH_{3}[/tex])2+] / ([Ag+][NH3]2) = 1.7 × [tex]10^{7}[/tex]
Step 4: Set up the equilibrium table and fill in the initial concentrations and changes for each species. Let x be the concentration of AgCl(s) that dissolves.
AgCl(s) 2 NH3(aq) Ag(NH3)2+(aq) Cl-(aq)
Initial x 1.5 M 0 0
Change x -2x +x +x
Equilibrium (x) (1.5-2x) M (x) (x)
Step 5: Substitute the equilibrium concentrations into the equilibrium constant expressions and solve for x.
Kf = [Ag([tex]NH_{3}[/tex])2+] / ([Ag+][[tex]NH_{3}[/tex]]2) = (x) / ([Ag+]([[tex]NH_{3}[/tex]]2 - 2x))
1.7 × 107 = x / ((x)(1.5 - 2x)2) = x / (2.25x2 - 6x + 2.25)
x = 2.63 × [tex]10^{-6}[/tex]M
Ksp = [Ag+][Cl-] = (2.63 × [tex]10^{-6}[/tex] M)(2.63 × [tex]10^{-6}[/tex] M) = 6.91 × [tex]10^{-12}[/tex]
Step 6: Check the assumption that 2x << 1.5 M. If this assumption is valid, then the calculated solubility is accurate.
2x / 1.5 M = 2.63 × [tex]10^{-6}[/tex]M / 1.5 M = 1.75 × [tex]10^{-6}[/tex] << 1, so the assumption is valid.
Therefore, the solubility of AgCl(s) in 1.5 M NH3(aq) is 2.63 ×[tex]10^{-6}[/tex] M.
Know more about solubility here:
https://brainly.com/question/9098308
#SPJ11
CalculateΔS⁰298 (in J/K/mol) for the following changes. (Hint: Use the Standard State Thermodynamic Data and Standard Aqueous Thermodynamic Data tables.)(a)MnS(s) + Mg(s) → MgS(s) + Mn(s)J/K/mol(b)CHCl3(g) → CHCl3(l)J/K/mol(c)Pb(s) + H2SO4(aq) → PbSO4(s) + H2(g)J/K/mol(d)C6H6(l) → C6H6(g)J/K/mol(e)2 Cl(g) → Cl2(g)J/K/mol(f)Mn2O3(s) + 2 Fe(s) → Fe2O3(s) + 2 Mn(s)J/K/mol(g)CBr4(s) → CBr4(g)J/K/mol
For the given equations we need to calculate the ΔS⁰298 (in J/K/mol),
(a) -64.6 J/K/mol
(b) -51.1 J/K/mol
(c) +1.6 J/K/mol
(d) +92.2 J/K/mol
(e) +223.0 J/K/mol
(f) -320.7 J/K/mol
(g) +101.3 J/K/mol
(a) ΔS⁰298 for MnS(s) + Mg(s) → MgS(s) + Mn(s): is -64.6 J/K/mol.
The reaction involves the solid-state formation of two sulfides, and the entropy of the reaction decreases because the reactants have greater entropy than the products.
(b) ΔS⁰298 for [tex]CHCl_3[/tex](g) →[tex]CHCl_3[/tex](l) is: -51.1 J/K/mol.
When CHCl3 changes from the gas phase to the liquid phase, the number of accessible microstates decreases, resulting in a decrease in entropy.
(c) ΔS⁰298 for Pb(s) + [tex]H_2SO_4[/tex](aq) → [tex]PbSO_4[/tex](s) +[tex]H_2[/tex](g) is: +1.6 J/K/mol.
The reaction involves the formation of gas and solid products from a solid metal and an aqueous solution. The entropy change is positive because the number of accessible microstates increases when a solid reacts with a liquid.
(d) ΔS⁰298 for [tex]C_6H_6[/tex](l) → [tex]C_6H_6[/tex](g) is: +92.2 J/K/mol.
The transition from the condensed phase to the gas phase results in an increase in the entropy of the system, as the number of accessible microstates increases.
(e) ΔS⁰298 for 2 Cl(g) → [tex]Cl_2[/tex](g) is: +223.0 J/K/mol.
The reaction involves a decrease in the number of moles of gas in the system, resulting in a decrease in entropy.
(f) ΔS⁰298 for [tex]Mn_2O_3[/tex](s) + 2 Fe(s) → [tex]Fe_2O_3[/tex](s) + 2 Mn(s) is: -320.7 J/K/mol.
The reaction involves the solid-state formation of two oxides, and the entropy of the reaction decreases because the reactants have greater entropy than the products.
(g) ΔS⁰298 for [tex]CBr_4[/tex](s) → [tex]CBr_4[/tex](g) is: +101.3 J/K/mol.
The transition from the condensed phase to the gas phase results in an increase in the entropy of the system, as the number of accessible microstates increases.
To know more about "Entropy" refer here:
https://brainly.com/question/28382979#
#SPJ11
21.50 draw the products formed (including steroisomers) in each reaction
Stereoisomers are compounds that have the same molecular formula and connectivity of atoms but differ in the arrangement of their atoms in space.
The still unclear and incomplete without information about the specific reaction(s) being referred to. In order to draw the products formed and their stereoisomers, it is necessary to know the reactants, conditions, and any other relevant factors that are involved in the reaction. Without this information, it is impossible to provide a meaningful. Therefore, I cannot provide a response until more details are provided. Please provide more information about the specific reaction(s) that the is referring to, and I will be happy to help you with your query.
Learn more about stereoisomers here;
https://brainly.com/question/31492606
#SPJ11
1. Balance each of the following redox reactions occurring in acidic aqueous solution. Part A K(s)+Al3+(aq)→Al(s)+K+(aq) Express your answer as a chemical equation. Identify all of the phases in your answer. Part B Cr(s)+Fe2+(aq)→Cr3+(aq)+Fe(s) Express your answer as a chemical equation. Identify all of the phases in your answer.
Part C IO3−(aq)+N2H4(g)→I−(aq)+N2(g) Express your answer as a chemical equation. Identify all of the phases in your answer.
According to the given question we can balance as redox reactions occurring in acidic aqueous solution in Chemical Equation .
Part A:
In this reaction, K is oxidized to K+ while Al3+ is reduced to Al. To balance this reaction, we can first write the unbalanced equation:
K + Al3+ → Al + K+
Next, we can balance the charges by adding electrons:
K + Al3+ + 3e- → Al + K+
Now we can balance the number of atoms on each side:
2K + Al3+ + 3e- → 2Al + 2K+
Finally, we can add the appropriate coefficients to balance the number of electrons:
2K(s) + Al3+(aq) + 3H2O(l) → 2Al(s) + 2K+(aq) + 3H2O(l) + 3H+(aq)
Part B:
In this reaction, Cr is oxidized to Cr3+ while Fe2+ is reduced to Fe. To balance this reaction, we can first write the unbalanced equation:
Cr + Fe2+ → Cr3+ + Fe
Next, we can balance the charges by adding electrons:
Cr + Fe2+ + 2e- → Cr3+ + Fe
Now we can balance the number of atoms on each side:
2Cr + 3Fe2+ + 6e- → 2Cr3+ + 3Fe
Finally, we can add the appropriate coefficients to balance the number of electrons:
2Cr(s) + 3Fe2+(aq) + 7H2O(l) → 2Cr3+(aq) + 3Fe(s) + 14H+(aq)
Part C:
In this reaction, IO3- is reduced to I- while N2H4 is oxidized to N2. To balance this reaction, we can first write the unbalanced equation:
IO3- + N2H4 → I- + N2
Next, we can balance the number of nitrogen atoms on each side by adding a coefficient of 3 to N2:
IO3- + N2H4 → I- + 3N2
Now we can balance the number of oxygen atoms on each side by adding a coefficient of 5 to IO3-:
5IO3- + N2H4 → 5I- + 3N2
Finally, we can add the appropriate coefficients to balance the number of atoms on each side:
5IO3-(aq) + N2H4(g) + 8H+(aq) → 5I-(aq) + 3N2(g) + 12H2O(l)
In summary, balancing redox reactions requires identifying the oxidized and reduced species, balancing charges by adding electrons, balancing atoms on each side, and adding coefficients to balance the number of electrons.
To know more about Redox Reaction visit :
https://brainly.com/question/13293425
#SPJ11
The change in enthalpy (ΔHorxn) for a reaction is -31 kJ/mol . The equilibrium constant for the reaction is 1.1×103 at 298 K. What is the equilibrium constant for the reaction at 699 K ?
The equilibrium constant for the reaction at 699 K is 1.6x[tex]10^5[/tex]. This indicates that at a higher temperature, the reaction more strongly favors the products compared to the reaction at 298 K.
To solve this problem, we need to use the Van 't Hoff equation, which relates the equilibrium constant of a reaction to temperature:
[tex]ln(K2/K1) = (\Delta H/R) * (1/T1 - 1/T2)[/tex]
where K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH is the change in enthalpy, R is the gas constant, and ln denotes the natural logarithm.
Plugging in the given values, we get:
[tex]ln(K2/1.1*10^3) = (-31 kJ/mol / (8.314 J/mol K)) * (1/298 K - 1/699 K)[/tex]
Solving for K2, we get:
[tex]K_2 = 1.1*10^3 * e^{(-31 kJ/mol / (8.314 J/mol K) }*(1/298 K - 1/699 K)) \\K2 = 1.6x10^5[/tex]
To know more about equilibrium constant, here
brainly.com/question/10038290
#SPJ4
.46) draw the major product of the following reaction mechanism: Cl2+, H2O
47) draw the major product of the following reaction mechanism: Br2, CH2Cl2
48) draw the major product of the following reaction mechanism not needed: CH3CO3H
49) Draw the product of the following reaction not needed: O3, (CH3)2S
46) The major product of the reaction mechanism between Cl2+ and H2O is HOCl, which is formed through the reaction Cl2+H2O -> HOCl + H+ + Cl-
47) The major product of the reaction mechanism between Br2 and CH2Cl2 is the addition product of Br2 and CH2Cl2, which is formed through the reaction Br2+CH2Cl2 -> BrCH2Cl + HBr
48) The reaction mechanism not needed for the question, therefore no answer can be given.
49) The product of the following reaction between O3 and (CH3)2S is dimethyl sulfide oxide, which is formed through the reaction O3 + (CH3)2S -> (CH3)2SO + O2.
As a text-based AI, I am unable to physically draw the structures of the products for these reactions. However, I can provide you with a brief description of the major products and their formation.
46) In the presence of Cl2 and H2O, an alkene will undergo halohydrin formation. The major product will be a halohydrin, with the Cl atom attached to the less substituted carbon and an OH group attached to the more substituted carbon of the alkene.
47) When an alkene reacts with Br2 and CH2Cl2, it undergoes a halogenation reaction. The major product will be a vicinal dibromide, with Br atoms added across the double bond of the alkene.
48) When CH3CO3H (peracetic acid) is used as a reagent, it typically results in an epoxidation reaction for an alkene. The major product will be an epoxide, with an oxygen atom inserted into the double bond.
49) When an alkene reacts with O3 followed by (CH3)2S (dimethyl sulfide), it undergoes an ozonolysis reaction. The major product will be two carbonyl compounds formed from the cleavage of the double bond in the alkene.
To know more about alkene visit:
https://brainly.com/question/31033378
#SPJ11
For 6 points, a 0.50 liter solution of 0.10 M HF titrated to the half way point with a 0.10 M solution of NaOH. Determine the pH of the half way point. Use two significant figures in your final answer. Answer:
The pH of the half way point is approximately 1.59 (rounded to two significant figures).
The reaction between HF and NaOH is:
HF + NaOH → NaF + H₂O
At the half-equivalence point, half of the HF has reacted with NaOH to form NaF, and the other half remains as HF. This means that the moles of NaOH added is equal to the moles of HF consumed.
The initial moles of HF in the solution is:
0.10 mol/L × 0.50 L = 0.050 mol
At the half-equivalence point, 0.025 moles of NaOH has been added, which reacts with 0.025 moles of HF.
The moles of HF remaining in the solution is:
0.050 mol - 0.025 mol = 0.025 mol
The concentration of HF remaining in solution is:
0.025 mol / 0.25 L = 0.10 M
The dissociation of HF in water is:
HF + H2O ↔ H3O+ + F-
The Ka expression for HF is:
Ka = [H3O+][F-] / [HF]
Assuming x is the concentration of H₃O+ and F-, and the initial concentration of HF is equal to its concentration at the half-equivalence point, we can write the equilibrium expression for HF as:
Ka = x^2 / (0.10 - x)
At the half-equivalence point, the concentration of HF remaining in solution is 0.10 M.
Therefore, we can simplify the equation to:
Ka = x^2 / (0.10 - x) ≈ x^2 / 0.10
Solving for x gives:
x = sqrt(Ka × [HF]) = sqrt(6.8 × 10^-4 × 0.10) ≈ 0.026
The pH at the half-equivalence point can be calculated from the concentration of H₃O+:
pH = -log[H₃O+] = -log(0.026) ≈ 1.59
Therefore, the pH of the half way point is approximately 1.59 (rounded to two significant figures).
To learn more about pH refer here:
https://brainly.com/question/15289741#
#SPJ11
a chlorinated derivative of benzene had only two peaks for aromatic carbons in its 13c nmr spectrum. of the following, which compound can be eliminated on the basis of this information?
The only compound that can be eliminated on this basis is the para-dichlorobenzene because its two carbon atoms are located in the para position with respect to the chlorine substituents, which are in the ortho position.
The chlorinated derivative of benzene with only two peaks for aromatic carbons in its 13c nmr spectrum indicates that two of the carbon atoms in the benzene ring are chemically equivalent and have the same chemical shift. This means that these two carbon atoms are either both ortho or both meta to the chlorine substituent. In para-dichlorobenzene, all carbon atoms are chemically equivalent due to the symmetry of the molecule, which results in only one peak for aromatic carbons in its 13c nmr spectrum. Therefore, the correct answer is para-dichlorobenzene cannot be the compound in question.
Based on the information provided, we know that the chlorinated derivative of benzene has only two peaks for aromatic carbons in its 13C NMR spectrum. This indicates that there is a symmetry in the molecule, causing some of the aromatic carbons to be chemically equivalent and, therefore, appearing as fewer peaks in the spectrum.
To determine which compound can be eliminated based on this information, we would need a list of potential compounds to analyze. However, since the list is not provided, I cannot specify the compound to be eliminated. Please provide the list of compounds, and I will be happy to help you eliminate the incorrect option.
To know more about compounds visit:
https://brainly.com/question/14782984
#SPJ11