Referring to Exercise 7.13, suppose that the effects of copper on a second species (say, species B) of fish show the variance of ln(LC50) measurements to be .8. If the population means of ln(LC50) for the two species are equal, find the probability that, with random samples of ten measurements from each species, the sample mean for species A exceeds the sample mean for species B by at least 1 unit.
Reference
The Environmental Protection Agency is concerned with the problem of setting criteria for the amounts of certain toxic chemicals to be allowed in freshwater lakes and rivers. A common measure of toxicity for any pollutant is the concentration of the pollutant that will kill half of the test species in a given amount of time (usually 96 hours for fish species). This measure is called LC50 (lethal concentration killing 50% of the test species). In many studies, the values contained in the natural logarithm of LC50 measurements are normally distributed, and, hence, the analysis is based on ln(LC50) data. Studies of the effects of copper on a certain species of fish (say, species A) show the variance of ln(LC50) measurements to be around .4 with concentration measurements in milligrams per liter. If n = 10 studies on LC50 for copper are to be completed, find the probability that the sample mean of ln(LC50) will differ from the true population mean by no more than .5.

The given statement " Research shows that sketch artists almost always produce more-accurate facial images than technicians using other methods." is True. Because sketch artists are able to capture more nuanced details of face

Research suggests that trained sketch artists can produce more accurate facial images compared to other methods such as facial recognition software or composite imaging software. This is because sketch artists can capture more details and variations in the facial features of a suspect or witness.

They can also work with the witness to create a likeness that accurately reflects their memory of the individual. Additionally, sketch artists are able to adjust and refine the image as the witness provides more information or corrections, leading to a more accurate final image.

To know more about facial images:

https://brainly.com/question/26152614

#SPJ4

Thus, A’s share is Rs. 2,40,000 and B’s share is Rs. 2,61,000.

A profit and loss statement (P&L) is a financial statement that summarizes income, expenses, and expenses incurred during a specified period of time.

Along with the balance sheet and cash flow statement, the income statement is one of the three financial statements issued quarterly and annually by all publicly traded companies.

When used together, the Income Statement, Balance Sheet, and Cash Flow Statement provide detailed insight into the company's overall financial performance.

Accounting is created using the cash method or the accrual method of accounting.

Changes over time are more important than the numbers themselves, so it's important to compare income statements from different accounting periods. 

According to our question-

Ratio of their share in profit = Ratio of their investments

Ratio of their share in profit = Ratio of their investments

⇒ 27000 × 5 + 23000 × 15 ∶ 36000 × 9 + 33000 × 6 ∶ 50000 × 6

Thus, ratio of their investments = 480000 ∶ 522000 ∶ 300000 = 480 ∶ 522 ∶ 300 = 80 ∶ 87 ∶ 50

Profit earned after a year = Rs. 6,51,000

A’s share = (80/217) × 651000 = Rs. 240000

B’s share = (87/217) × 651000 = Rs. 261000

Hence, Thus, A’s share is Rs. 2,40,000 and B’s share is Rs. 2,61,000.

learn more about profit and loss click here:

https://brainly.com/question/26483369

#SPJ1

Simplifying remex's works the same way we simplify fractions. In fractions, a rational number is considered to be a simplified form when its numerator and denominator have no other common factors than 1.

Regular expressions are fractions with variables. In rational expressions, the numerator and denominator are polynomials. That is, it is of the form p(x)/q(x), where q(x) ≠ 0 and p(x) and q(x) are polynomials. Because regular expressions are nothing but fractions, we treat them as if they were fractions.

It is not possible to divide a number by 0. Check what 1/0 is with your calculator, it will return an error. Therefore, no regular expression is defined for variable values ​​with a denominator of 0 (because it is a fraction). For example, in the expression x / (x + 2), the denominator becomes zero when x = -2, so it is called the limit of the rational expression x / (x + 2). In other words, we say x / (x + 2) for all values ​​of x but x ≠ -2.

Simplifying a regular expression means reducing the value of a regular expression to its lowest term or simplified form. Simplifying regexps works the same way we simplify fractions. In fractions, a rational number is considered a simplified form when its numerator and denominator have no other common factors than 1. The same works for simplified rational expressions, but the only difference is that there are polynomials in the fraction. Let's see the steps to follow to simplify a regular expression.

Step 1: Factor each numerator and each denominator by taking the common factor.

Step 2: Cancel the common factor.

Step 3: Write the remaining terms in the numerator and denominator.

Step 4: Indicate limits, if any. Note that a constraint is any value that makes the denominator equal 0, including terms canceled during simplification.

Complete Question:

Simplify algebraic rational expressions, with numerators and denominators containing monomial bases with integer exponents, to equivalent forms.

Learn more about Denominator:

https://brainly.com/question/7067665

#SPJ4

We can see that p(p + 1)(p − 1) is not always divisible by 7, but it is always divisible by 5, 4, and 3. Thus, the correct answer is (G) 5.

A positive integer is a whole number greater than zero. In other words, it is a number that can be written without any fractional or decimal components, and is larger than zero. Positive integers are commonly denoted by the symbol "N" or "Z+".

A negative integer is a whole number less than zero. In other words, it is a number that can be written without any fractional or decimal components, and is smaller than zero. Negative integers are commonly denoted by the symbol "Z−".

In the given question,

We can simplify p(p + 1)(p − 1) as follows:

p(p + 1)(p − 1) = p(p² - 1) = p³- p

Now, we can consider the remainders when p is divided by each of the answer choices:

F. 7: If p = 7, then p³- p = 7³ - 7 = 342, which is not divisible by 7.

G. 5: If p = 5, then p³ - p = 5³ - 5 = 120, which is divisible by 5.

H. 4: If p = 4, then p³ - p = 4³ - 4 = 60, which is divisible by 4.

J. 3: If p = 3, then p³ - p = 3³ - 3 = 24, which is divisible by 3.

Therefore, we can see that p(p + 1)(p − 1) is not always divisible by 7, but it is always divisible by 5, 4, and 3.

Thus, the correct answer is (G) 5.

To know more about positive integers, visit:

https://brainly.com/question/18380011

#SPJ1

The probability that a randomly chosen card that is less than 7 is the 5 of diamonds is 5%.

There are four suits in a standard deck of 52 cards: diamonds, clubs, hearts, and spades. Each suit has 13 cards, with ranks ranging from 2 (low) to 10, jack, queen, king, and ace (high).

If a randomly chosen card from the deck is less than 7, there are only two possibilities: it is either a 2, 3, 4, 5, or 6 of any suit, or it is the 5 of diamonds.

There are 20 cards that are less than 7 in the deck (4 cards of each of the 5 ranks). Out of these 20 cards, only one is the 5 of diamonds.

Therefore, the probability that a randomly chosen card that is less than 7 is the 5 of diamonds is:

1/20 = 0.05 = 5%

Learn more about probability on:

https://brainly.com/question/25870256

#SPJ1

Answer:

1/6

Step-by-step explanation:

5/6 - 4/6 = 1/6

Answer:

Step-by-step explanation:

To subtract these fractions, we need to have a common denominator. In this case, the denominators 5 and 6 do not match, so we have to find the least common multiple (LCM) of 5 and 6, which is 30.

Then, we can convert both fractions so that they have a denominator of 30:

5/6 = 25/30

4/6 = 20/30

Now we can subtract the numerators:

25/30 - 20/30 = 5/30

Simplifying the result to its lowest terms, we have:

5/30 = 1/6

Therefore, 5/6 - 4/6 = 1/6.

[tex]T(11) = -1[/tex] represents the initial negative term inside the series.

A phrase that acknowledges a characteristic or trait in anything is said to be positive. Negative terms are those that downplay some aspect or characteristic of something. The positive or negativizes of a phrase is termed its quality.

Positive simply denotes excellent or the polar opposite of negative. For instance, you're less likely to receive favorable feedback on your scorecard if you've a good mindset toward your assignments. It might be difficult to keep track of all the different definitions of the word positive.

T(n) is negative when [tex]32 - 3n < 0[/tex], which can be rearranged as:

[tex]3n > 32[/tex]

[tex]n > 32/3[/tex]

Since [tex]n[/tex] is an integer, the smallest value of n that satisfies this inequality is [tex]n = 11[/tex].

Therefore, the [tex]11th[/tex] term of the sequence is:

[tex]T(11) = 32 - 3(11) = -1[/tex]

So the first negative term in the sequence is [tex]T(11) = -1.[/tex]

To know more about negative term visit:

https://brainly.com/question/21959954

#SPJ1

The distance between the points P and Q is 10 units using the Pythagorean theorem.

The right-angled triangle's three sides are related in accordance with the Pythagoras theorem, commonly known as the Pythagorean theorem. The Pythagorean theorem states that the hypotenuse square of a triangle is equal to the sum of the squares of the other two sides. According to the Pythagoras theorem, if a triangle has a right angle, the hypotenuse's square is equal to the sum of the squares of the other two sides.

The coordinates of the point P and Q are (3, 2) and (9, 10).

Using the Pythagoras theorem:

c² = (x2 - x1)² + (y2 - y1)²

Substitute the values:

c² = (9 - 3)² + (10 - 2)²

c² = 36 + 64

c² = 100

c = 10 units.

Hence, the distance between the points P and Q is 10 units using the Pythagorean theorem.

Learn more about Pythagoras Theorem here:

https://brainly.com/question/343682

#SPJ1

We cannot determine the actual value of the average rate of change without knowing the function f(x) or having a graph of the function.

The visual representation of mathematical functions or data points on a Cartesian coordinate system is an x-y axis graphic. The vertical or dependent variable is represented by the y-axis, while the horizontal or independent variable is represented by the x-axis. The difference between the change in output values and the change in input values is known as the average rate of change of a function over a period.

Let's assume that the function is denoted by f(x). Then, the average rate of change on the interval (a, b) can be calculated as

average rate of change = (f(b) - f(a)) / (b - a)

Using this formula, we can calculate the average rate of change on the given intervals as follows:

For the interval (-3, -2):

average rate of change = [tex]\frac{[f(-2) - f(-3)]}{[-2 - (-3)]}[/tex]

For the interval (1, 3):

average rate of change = [tex]\frac{(f(3) - f(1))}{(3 - 1)}[/tex]

For the interval (-1, 1):

average rate of change = [tex]\frac{(f(1) - f(-1))}{ (1 - (-1))}[/tex]

Note that we cannot determine the actual value of the average rate of change without knowing the function f(x) or having a graph of the function. If you provide the function or the graph, I can help you find the actual values of the average rate of change on these intervals.

To know more about plot, visit:

https://brainly.com/question/30195492

#SPJ1

If the determinant of a 5 times 5 matrix A, swapping two columns in a matrix changes the sign of the determinant. Thus, det(C) = -det(A) = -(9) = -9. Determinant of a 4 times 4 matrix A is det (A) = 6, multiplying a column of a matrix by a scalar k multiplies the determinant by k. Thus, det(B) = 5det(A) = 5(6) = 30.

To evaluate det(C) given that det(A) = 9 and C is obtained by swapping the third and fourth columns of A, we can use the fact that swapping two columns of a matrix multiplies its determinant by -1. Thus, det(C) = -det(A) = -9.

To evaluate det(B) given that det(A) = 6 and B is obtained by multiplying the second column of A by 5, we can use the fact that multiplying a column of a matrix by a scalar multiplies its determinant by that scalar. Thus, det(B) = 5(det(A)) = 5(6) = 30.

To know more about determinant:

https://brainly.com/question/4470545

#SPJ4

____The given question is incomplete, the complete question is given below:

If the determinant of a 5 times 5 matrix A is det (A) = 9= and the matrix C is obtained from A by swapping the third and fourth columns, then det C = If the determinant of a 4 times 4 matrix A is det (A) = 6, and the matrix B is obtained from A by multiplying the second column by 5 then det (B) =

The formula for the  temperature (T), number of gas molecules (n), volume (V), and pressure (P)  is found as: nR = 0.224 / 275.

While dealing with gas, a popular equation was utilized to relate the various components necessary to solve a gas problem. This same Ideal Gas Equation is the name given to this formula. We have always understood that there is no such thing as an ideal. Two well-known presumptions must have been made in this case in advance:

Those four gas variables are: temperature (T), number of gas molecules (n), volume (V), and pressure (P) . Last but not least, the following equation's constant, R, or the gas constant, will be covered in more detail later:

PV = nRT

PV/T = nR

Given data:

Putting the value;

nR = PV/T

nR = 10*0.0224 / 275

nR = 0.224 / 275

Thus, the formula for the  temperature (T), number of gas molecules (n), volume (V), and pressure (P)  is found as: nR = 0.224 / 275.

Know more about the universe gas law

https://brainly.com/question/27870704

#SPJ1

In response to the stated question, we may state that The other numbers range - 371 jelly beans, 517 jelly beans, and 522 jelly beans

The variable's range is calculated by taking its greatest observed value and subtracting its minimum observed value (minimum). Possible range or variational bounds: a variety of steel costs; a variety of styles; The scope or size of a method or action: perception. The maximum or anticipated range of a weapon's projectile. A list or set's range is the number between the lowest and maximum. Align all of the numbers before determining the region. Next, subtract (reduce) the lowest number from the greatest number. The solution includes the range of the list. The solution specifies the range of the list.

The interquartile range (IQR) indicates how far the consumers' predictions differed. In this instance, the IQR is 381 jelly beans. The IQR is a measure of the spread of predictions around the median since it shows the range of the middle 50% of the guesses.

The other numbers - 371 jelly beans, 517 jelly beans, and 522 jelly beans - are not measurements of how much the consumers' predictions changed, but rather individual data points (the median guess, the actual number of jelly beans, and the winning guess, respectively).

To know more about range visit:

https://brainly.com/question/28135761

#SPJ1

4π  is the period of the tangent function.

What does Tangent Function mean?

The tangent function, one of the primary six trigonometric functions, is typically expressed as tan x. When considering the angle in a right-angled triangle, it is the ratio of the opposite side to the adjacent side.

                                        It is crucial to understand the tangent function in trigonometry because it is a periodic function. Using the unit circle will make understanding the tangent function the simplest possible.

  a tangent function f (x) on the interval [–2π, 2π].

∵ f(-2π) and f(2π) are not defined.

∴ x = -2π and x = 2π are two closet asymptotes .   { the asymptotes of        

                                                                                tangent function.}

  ∴ period = 2π - (- 2π )

                  = 4π

Learn more about tangent function

brainly.com/question/30910929

#SPJ1

The final closed formula answers for each part,

(a) an = n^2 + 1

(b) an = n(n + 1)(n + 2)/6

(c) an = 2n + 6

(d) an = n! + (n-1)! + ... + 2! + 1!

(a) The given sequence can be seen as the sequence of partial sums of the sequence of odd numbers: 1, 3, 5, 7, 9, . . . . That is, the nth term of the given sequence is the sum of the first n odd numbers, which is n^2. Therefore, the closed formula for the given sequence is an = n^2 + 1.

(b) The given sequence can be seen as the sequence of partial sums of the sequence of triangular numbers: 1, 3, 6, 10, 15, . . . . That is, the nth term of the given sequence is the sum of the first n triangular numbers, which is n(n + 1)(n + 2)/6. Therefore, the closed formula for the given sequence is an = n(n + 1)(n + 2)/6.

(c) The given sequence can be seen as the sequence of differences between consecutive squares: 1, 5, 9, 16, 21, . . . . That is, the nth term of the given sequence is the difference between the (n+1)th square and the nth square, which is (n + 1)^2 - n^2 = 2n + 1. Therefore, the closed formula for the given sequence is an = 2n + 6.

(d) The given sequence can be seen as the sequence of partial sums of the sequence defined recursively by a1 = 1 and an+1 = an(n + 1) for n ≥ 1. That is, the nth term of the given sequence is the sum of the first n terms of the recursive sequence. It can be shown that the nth term of the recursive sequence is n! (n factorial), and therefore the nth term of the given sequence is the sum of the first n factorials. That is, an = 1 + 1! + 2! + ... + (n-1)! + n!. Therefore, the closed formula for the given sequence is an = n! + (n-1)! + ... + 2! + 1!.

Learn more about closed formula here

brainly.com/question/29029062

#SPJ4

Answer:

hdjeujnejsjjdjdjjdjd

Answer:

0.2162   (21.62%)

Step-by-step explanation:

Notice the total time of students is 407. (this is 83+79+88+72+85)

So the probability of having a 3 is:

[tex]P(3)= \frac{88}{407} =0.2162[/tex]

This is 21.62%

Answer:

Model D) a spinner with 6 equal sections can be used to simulate the contestant's chances of winning.

Step-by-step explanation:

A spinner with 6 equal sections represents the possible outcomes of the game show, where each section represents a possible win or loss. Since the contestant has a 1 in 6 chance of winning, the spinner would have one section representing a win and five sections representing a loss. Each spin of the spinner would represent one try at the game show, and the probability of winning can be determined by calculating the theoretical probability of landing on the win section.

The categorical data in the table is column C, Position.

In mathematics and statistics, a table is a way of presenting data in a structured manner, typically with columns and rows. Tables are commonly used to organize and present large amounts of data in a clear and concise way, making it easier to read and analyze. Tables can be used to display numerical data, as well as categorical data, such as names, dates, and labels. They can also be used to summarize data and display relationships between different variables. Tables are often used in scientific research, business, finance, and other fields where data analysis is important.

Here,

In the table given, the only column that contains categories or groups is the "Position" column. It contains categorical data as it lists the positions of the players - Goal, Wing, and Center. On the other hand, "Name" and "Goals" columns contain individual values and numerical data, respectively, and are not considered categorical data.

To know more about table,

https://brainly.com/question/30244091

#SPJ1

In response to the stated question, we may state that As a result, the function journey lasted 5.1875 hours.

In mathematics, a function is a connection between two sets of numbers in which each member of the first set (known as the domain) corresponds to a single element in the second set (called the range).

In other words, a function takes inputs from one set and produces outputs from another. Inputs are commonly represented by the variable x, whereas outputs are represented by the variable y.

A function can be described using an equation or a graph. The equation y = 2x + 1 represents a linear function in which each value of x yields a distinct value of y.v

a) Because time cannot be negative, the domain of the function g(t) is the set of all non-negative real numbers. As a result, the domain is [0, ].

Because the amount of gas in the tank cannot be negative or more than the tank's capacity. The range of the function g(t) is the set of all non-negative real numbers less than or equal to 23 (the maximum capacity of the tank).

We can graph the function g(t) by plotting points for different values of t and connecting them with a line. For instance, if we pick t = 0, g(0) = 23, we plot the point (0, 23). We plot the point if we select t = 1 and g(1) = 19.8. (1, 19.8).

c) We are informed that there are 6.4 gallons remaining at the end of the journey. As a result, g(t) = 6.4. We can solve for t by plugging this number into the equation for g(t):

[tex]6.4 = 23–3.2t 3.2t = 16.6 t = 5.1875 g(t) = 23–3.2t[/tex]

Therefore, the journey lasted 5.1875 hours.

Learn more about function here:

https://brainly.com/question/28193995

#SPJ1

Answer: y = 12 - 1.25x

Step-by-step explanation:

Let y be the number of yards of fabric remaining after Tara sews x tote bags.

Initially, Tara has 12 yards of fabric. For every tote bag she sews, she uses 1.25 yards of fabric. Therefore, the total amount of fabric used after sewing x tote bags is 1.25x yards.

The number of yards of fabric remaining is the difference between the initial amount of fabric and the total amount of fabric used:

y = 12 - 1.25x

This equation shows how the number of yards of fabric remaining depends on the number of tote bags Tara sews, x. As she sews more tote bags, the amount of fabric remaining decreases.

Answer:

5.75 yds left

1.25 yards each bag multiplied by 5 bags is 6.25 yards utilized

Tara's yardage was 12-6.25 = 5.75.

She has 5.75 yards to go.

Step-by-step explanation:

brainliest pls

Answer:

D

Step-by-step explanation:

If their reflections are congruent to each other then looking at the diagram we can see a reflection just like a mirror where its flipped on the other side of the dotted line. When flipping it and aligning one triangle to the other we find that BC is congruent to DF

The measure of the angle A is 49.99 degrees or 50 degrees if the length of AB = 14 and AC = 9.

Trigonometry is a branch of mathematics that deals with the relationship between sides and angles of a right-angle triangle.

We have a given a right angle triangle in the picture

It is required to find the measure of angle A

Applying cos ratio to find the measure of the angle A:

cosA = 9/14

cosA = 0.642

A = 49.99 ≈ 50 degree

Thus, the measure of the angle A is 49.99 degrees or 50 degrees if the length of AB = 14 and AC = 9.

Learn more about trigonometry here:

https://brainly.com/question/26719838

Answer:

4:9

Step-by-step explanation:

Answer:

Scale factor = 2.25

Step-by-step explanation:

To find the scale factor between two similar shapes, we need to compare the corresponding sides of the shapes.

The scale factor is the ratio of the length of any side of one shape to the length of the corresponding side on the other shape.

From inspection of the given diagram, the ratio of the corresponding sides of the two similar figures is:

⇒ Figure 1 : Figure 2 = 8 : 18

Therefore, to find the scale factor from Figure 1 to Figure 2, divide the side length of Figure 2 by the corresponding side length of Figure 1:

[tex]\implies \sf Scale\;factor=\dfrac{18}{8}=2.25[/tex]

No, we cannot perform element by element addition, subtraction, multiplication and division when the matrices are different sizes, because to do this the size of matrices should be same.

The Element-by-element operations, also called element-wise operations, can only be performed when two matrices have the same dimensions, meaning they have the same number of rows and columns.

In this case, the operations are applied to the corresponding elements of each matrix, resulting in a new matrix with the same dimensions as the original matrices.

When the two matrices have different sizes, element-by-element operations are not defined. In some cases, it may be possible to perform other types of operations, such as matrix multiplication or matrix addition (if the matrices have compatible dimensions).

Learn more about Matrices here

https://brainly.com/question/1312667

#SPJ4

The given question is incomplete, the complete question is

Can your perform element by element addition, subtraction, multiplication and division when the matrices are different sizes?

The calculation of the interest received by Investor A and Investor B is as follows:

Compound interest is based on the system of charging interest on accumulated interest and principal for each period.

Simple interest is charged on only the principal for each period.

N (# of periods) = 3 years

I/Y (Interest per year) = 8%

PV (Present Value) = $4,500

PMT (Periodic Payment) = $0

Results:

Future Value (FV) = $5,668.70

Total Interest = $1,168.70

N (# of periods) = 3 years

r = 1 paisa per rupee per month

= 1÷100*100 = 1%

Annually rate =1%*12 = 12%

PV (Present Value) = $4,500

Results:

Total Interest = $1,620 (R4,500 x 12% x 3)

Future Value (FV) = $6,120.

Thus, while Investor A receives $1,168.70 at the end of 3 years, Investor B receives $1,620.

Learn more about compound and simple interests at https://brainly.com/question/2277782.

#SPJ1

Answer:

Step-by-step explanation:

Solve for w.

74=171-w

74 = 171 - w

w = 171 - 74

w = 97

----------------------

check

74 = 171 - 97

74 = 74

the answer is good

The mass of the solid is approximately 17.333 units.

To find the mass of the solid bounded by the given planes, we need to integrate the density function δ(x,y,z) over the volume of the solid. We can express the volume of the solid as the region enclosed by the planes

0 ≤ x ≤ 2, 0 ≤ y ≤ 3, 0 ≤ z ≤ 6-3x-2y

So, the mass of the solid is given by the triple integral

M = ∭ δ(x,y,z) dV

= ∫₀² ∫₀³ ∫₀^(6-3x-2y) (x+4y) dz dy dx

= ∫₀² ∫₀³ [(x+4y)(6-3x-2y)] dy dx

= ∫₀² [(6x-3x²)⁄2 + 8xy - 4y²] dy

= ∫₀² [(6x-3x²)⁄2 + 12x - 36] dx

= [3x³/2 - x⁴/4 + 6x² - 36x]₀²

= (12 - 8/3 + 24 - 72) - (0 - 0 + 0 - 0)

= 17.333 units

Learn more about mass here

brainly.com/question/14864913

#SPJ4

The flow field is rotational because the curl of the velocity field is non-zero, which is calculated as (-b)k, where k is the unit vector in the z direction.

The velocity field V can be expressed as:

V = (u,v) = (U0+bx)i - (by)j

The flow is rotational if the curl of the velocity field is non-zero, i.e.:

∇ x V ≠ 0

Using the curl operator:

∇ x V = (∂v/∂x - ∂u/∂y)k

where k is the unit vector in the z direction.

Evaluating the partial derivatives:

∂v/∂x = 0, since v does not depend on x

∂u/∂y = -b, since the derivative of by with respect to y is -b

Therefore, the curl of the velocity field is:

∇ x V = (-b)k

Since the curl is non-zero, the flow field is rotational.

To know more about velocity:

https://brainly.com/question/14577390

#SPJ4