Answer:10
Step-by-step explanation:
so lets say 4 is 100 then you are decreasing it by 1/4 so it is 3/4 with is 10 :)
Pls rate brainiest
Consider the following hypotheses:
H0: p ≥ 0.59
HA: p < 0.59
Compute the p-value based on the following sample information. (You may find it useful to reference the appropriate table: z table or t table) (Round "z" value to 2 decimal places. Round intermediate calculations to at least 4 decimal places and final answers to 4 decimal places.)
p-value
a. x = 51; n = 100 b. x = 138; n = 276 c. p¯p¯ = 0.54; n = 53 d. p¯p¯ = 0.54; n = 425
In all cases, the p-value is less than the significance level of 0.05, so we reject the null hypothesis and conclude that there is evidence to support the alternative hypothesis. The probability of observing a sample proportion as extreme or more extreme than the one observed, assuming the null hypothesis is true, is very low.
To compute the p-value, we first need to calculate the test statistic z-score using the sample proportion and the null hypothesis.
a. x = 51; n = 100
The sample proportion is p-hat = x/n = 51/100 = 0.51
The test statistic is z = (p-hat - p0) / sqrt(p0(1-p0)/n) = (0.51 - 0.59) / sqrt(0.59(1-0.59)/100) = -2.41
Using a standard normal distribution table, we find that the p-value is 0.0081.
b. x = 138; n = 276
The sample proportion is p-hat = x/n = 138/276 = 0.50
The test statistic is z = (p-hat - p0) / sqrt(p0(1-p0)/n) = (0.50 - 0.59) / sqrt(0.59(1-0.59)/276) = -3.27
Using a standard normal distribution table, we find that the p-value is 0.0005.c. p¯p¯ = 0.54; n = 53
The test statistic is z = (p-hat - p0) / sqrt(p0(1-p0)/n) = (0.54 - 0.59) / sqrt(0.59(1-0.59)/53) = -1.62
Using a standard normal distribution table, we find that the p-value is 0.0526.d. p¯p¯ = 0.54; n = 425
The test statistic is z = (p-hat - p0) / sqrt(p0(1-p0)/n) = (0.54 - 0.59) / sqrt(0.59(1-0.59)/425) = -4.42
Using a standard normal distribution table, we find that the p-value is 0.000004.
For such more questions on Null hypothesis:
https://brainly.com/question/4436370
#SPJ11
george's dog ran out of the yard. it ran 20 meters, turned and ran 5 meters, and then turned 85° to face the yard. how far away from the yard is george's dog? round to the nearest hundredth.
To find how far away from the yard George's dog is, we need to use trigonometry. We can use the Pythagorean theorem to find the distance the dog ran before turning to face the yard:
20^2 + 5^2 = 425
So the dog ran √425 meters before turning.
Now we can use trigonometry to find the distance the dog is from the yard. We know that the angle between the dog's current position and the yard is 85°. We can use the tangent function:
tan(85°) = opposite/adjacent
The opposite side is the distance the dog is from the yard, and the adjacent side is the distance the dog ran before turning. So we can solve for the opposite side:
tan(85°) = opposite/√425
opposite = tan(85°) x √425
opposite ≈ 57.61 meters
So George's dog is approximately 57.61 meters away from the yard.
To know more about Trigonometric identities:
https://brainly.com/question/24496175
#SPJ11
What is the point of intersection when the system of equations below is graphed on the coordinate plane?
(1, –3)
(–1, 3)
(1, 3)
(–1, –3)
Answer:
The answer to your problem is, B. (-1,3)
Step-by-step explanation:
( My guess why you have put it a question is because you do not know why it is incorrect let me explain )
The coordinates that are given the intersection is: ( -1, 3 )
Being the answer.
Here the equations of the system of equations are:
-x+y=4
6x+y= -3
Put it on a coordinate plane ( In picture )
Thus the answer to your problem is, B. (-1,3)
Picture ↓
Math
Language arts
区
Science
Sixth grade > T.3 Convert and compare customary units 9TJ
Which is more, 34 ounces or 2 pounds?
1 gallon is equivalent to 3.785 liters, so 5 liters is equivalent to approximately 1.32 gallons.
Here,
In math, two values are equivalent if they have the same numerical value or represent the same amount or quantity. For example, the fractions 1/2 and 2/4 are equivalent because they represent the same amount or quantity (one-half of a whole).
Similarly, the expressions 3x and 6x/2 are equivalent because they have the same numerical value (both simplify to 3x). In general, we can say that two values are equivalent if they can be transformed or manipulated in a mathematically valid way to obtain the same result.
In the given question,
In math, two values are equivalent if they have the same numerical value or represent the same amount or quantity. For example, the fractions 1/2 and 2/4 are equivalent because they represent the same amount
The customary unit that a measurement of 5 liters could be converted to is gallons.
1 gallon is equivalent to 3.785 liters, so 5 liters is equivalent to approximately 1.32 gallons.
To know more about equivalent , visit:
brainly.com/question/14672772
#SPJ1
complete question;
Which customary unit could a measurement of 5 liters be converted to?
gallons
ounces
pounds
feet
the augmented matrix for a system of linear equations is. determine the value of k for which the system has infinitely many solutions: a) Okt 2 b) Ok=2 c) Od 0 d) Ok2 e)ky -2.ko 0 None of the above
Therefore, None of the given options correspond to a row of zeros in the augmented matrix, so the value of k for infinitely many solutions cannot be determined
The augmented matrix for a system of linear equations can be used to determine the value of k for which the system has infinitely many solutions. To do this, we need to perform row operations on the matrix until we get it into row echelon form or reduced row echelon form. If we end up with a row of zeros, then the system has infinitely many solutions. Looking at the options given, it appears that none of them correspond to a row of zeros in the augmented matrix. Therefore, we cannot determine the value of k for which the system has infinitely many solutions based on the given options.
Therefore, None of the given options correspond to a row of zeros in the augmented matrix, so the value of k for infinitely many solutions cannot be determined.
To know more about the function visit :
https://brainly.com/question/11624077
#SPJ11
Consider the one-sided (right side) confidence interval expressions for a mean of a normal population. What value of a would result in a 85% CI?
The one-sided (right side) confidence interval expression for an 85% confidence interval for the population mean is:
[tex]x + 1.04σ/√n < μ\\[/tex]
For a one-sided (right side) confidence interval for the mean of a normal population, the general expression is:
[tex]x + zασ/√n < μ\\[/tex]
where x is the sample mean, zα is the z-score for the desired level of confidence (with area α to the right of it under the standard normal distribution), σ is the population standard deviation, and n is the sample size.
To find the value of a that results in an 85% confidence interval, we need to find the z-score that corresponds to the area to the right of it being 0.15 (since it's a one-sided right-tailed interval).
Using a standard normal distribution table or calculator, we find that the z-score corresponding to a right-tail area of 0.15 is approximately 1.04.
Therefore, the one-sided (right side) confidence interval expression for an 85% confidence interval for the population mean is:
[tex]x + 1.04σ/√n < μ[/tex]
To know more about normal distribution refer here:
https://brainly.com/question/29509087
#SPJ11
Use the Cayley-Hamilton theorem to find A −1
,A 3
, and A 4
for the given matrix A. A= ⎣
⎡
1
0
0
3
4
0
0
0
4
⎦
⎤
Find A −1
. Select the correct choice below and, if necessary, fill in the answer box to complete your choice. A. A −1
= (Simplify your answer. Type an integer or decimal for each matrix element.) B. A −1
does not exist.
The inverse of the given matrix A does not exist, denoted as [tex]A^{-1}[/tex] does not exist.
To determine if the inverse matrix A exists, we can use the determinant of A. If the determinant is non-zero, then A^-1 exists. However, if the determinant is zero, [tex]A^{-1}[/tex] does not exist.
Calculating the determinant of matrix A, we have:
|A| = |1 0 0|
|3 4 0|
|0 0 4|
Expanding the determinant along the first row, we have:
|A| = 1 × (4 × 4 - 0 ×0) - 0 × (3 × 4 - 0 × 0) + 0 ×(3 × 0 - 4 × 0)
= 16
Since the determinant is non-zero (16 ≠ 0), the inverse of matrix A exists.
However, to find the inverse of matrix A, we need to calculate the adjugate of A and multiply it by the reciprocal of the determinant. This process involves finding the cofactor matrix, which requires calculating the minors and the cofactors of A.
Learn more about inverse matrix here:
https://brainly.com/question/28097317
#SPJ11
The parameter(s) for the chi-square distribution is/are (check all that apply): - A. stảndard deviation - B. mean - C. proportion - D. degrees of freedom - E. sample size
The parameter(s) for the chi-square distribution are the degrees of freedom (D). The chi-square distribution is a probability distribution used in statistical tests to determine the difference between observed and expected frequencies. It is commonly used to test for independence between two variables. The degrees of freedom refer to the number of independent observations in a dataset. As the degrees of freedom increase, the shape of the chi-square distribution becomes more symmetric. It is important to note that neither the standard deviation, mean, proportion, nor sample size is a parameter for the chi-square distribution.
The chi-square distribution is used in hypothesis testing to determine whether the observed data is significantly different from the expected data. It is calculated using the degrees of freedom, which are the number of independent observations in the dataset. The chi-square distribution is commonly used in the analysis of contingency tables and the goodness-of-fit test.
In conclusion, the parameter(s) for the chi-square distribution is/are the degrees of freedom. None of the other options, such as standard deviation, mean, proportion, or sample size, are parameters for the chi-square distribution. It is important to understand the significance of degrees of freedom in statistical tests and how they affect the shape of the chi-square distribution.
To know more about chi-square distribution visit:
https://brainly.com/question/30259945
#SPJ11
find the derivative of the function (3x^2 5x 1)^3/2
Answer:
The derivative of the function is:
dy/dx = 9x(3x^2 + 5x + 1)^(1/2) + (15/2)(3x^2 + 5x + 1)^(1/2)
Step-by-step explanation:
To find the derivative of the function, we can use the chain rule and the power rule:
Let y = (3x^2 + 5x + 1)^(3/2)
Then, we have:
dy/dx = (3/2)(3x^2 + 5x + 1)^(1/2) (6x + 5)
Simplifying this expression, we get:
dy/dx = 9x(3x^2 + 5x + 1)^(1/2) + (15/2)(3x^2 + 5x + 1)^(1/2)
Therefore, the derivative of the function is:
dy/dx = 9x(3x^2 + 5x + 1)^(1/2) + (15/2)(3x^2 + 5x + 1)^(1/2)
To Know more about derivative refer here
https://brainly.com/question/25324584#
#SPJ11
What numbers come next in this sequence
The number next in the sequence is 216 and 343 respectively.
What is a sequence?The sequence is an arrangement of numbers in a particular or successive order. It is also a set of logical steps carried out in order.
How to determine this
Here, the First term = 1 = [tex]1^{3}[/tex]
Second term = 8 = [tex]2^{3}[/tex]
Third term = 27 = [tex]3^{3}[/tex]
Fourth term = 64 = [tex]4^{3}[/tex]
Fifth term = 125 = [tex]5^{3}[/tex]
Therefore nth term = [tex]n^{3}[/tex]
To find the sixth term
6th term = [tex]6^{3}[/tex] = 6 * 6 * 6= 216
To find the seventh term ,7th term = [tex]7^{3}[/tex]= 7 * 7 * 7= 343
Therefore, the next pattern is 1,8.27,64,125,216,343
Read more about Sequence
https://brainly.com/question/17487074
#SPJ1
Suppose there is no damping in a mass and spring system with m = 5, k = 20, and F0 = 5. Suppose that ω is chosen to be precisely the resonance frequency. a) Find ω. b) Find the amplitude of the oscillations at time t = 100.
a) The resonance frequency (ω) is 2 rad/s.
b) The amplitude of the oscillations at time t = 100 can be found using the formula A = (F0/m) / √((ω^2 - ωr^2)^2 + (2ζωr)^2), where ωr is the resonance frequency. However, since ω is chosen to be precisely the resonance frequency, the denominator becomes 0 and the amplitude becomes undefined.
a) To find the resonance frequency (ω), we use the formula ω = √(k/m), where k is the spring constant and m is the mass. In this case, k = 20 and m = 5, so ω = √(20/5) = 2 rad/s.
b) The amplitude of the oscillations at time t = 100 can be found using the formula A = (F0/m) / √((ω^2 - ωr^2)^2 + (2ζωr)^2), where F0 is the amplitude of the driving force, ωr is the resonance frequency, and ζ is the damping ratio. However, in this system, it is mentioned that there is no damping (ζ = 0).
When ω is precisely equal to ωr, the denominator of the formula becomes 0. This means that the amplitude at time t = 100 is undefined, as dividing by 0 is not possible. Therefore, we cannot determine the amplitude of the oscillations at t = 100 in this scenario.
For more questions like Frequency click the link below:
https://brainly.com/question/29739263
#SPJ11
(2) Define T R3 R3 by (E) 0 1 -2 2 -6 -2 3 X Т 2 y 5 Let V be the set of all vectors that are fixed by T, which means that V= {ve R3 T(v) = v} (a) Show, using the definition of subspace, that V is a subspace of R3 (b) Come up with an equation that also defines V. (In other words, find a linear d such that yEV ax by cz = d.) equation ax+by +cz = (c) Geometrically, what kind of object is V (point/line/plane etc)? (d) Find a basis for V.
(a) V is a subspace of R3 since it satisfies the three conditions of subspace, namely, V contains the zero vector, V is closed under vector addition, and V is closed under scalar multiplication. (b) An equation that also defines V is 2x + y - 3z = 0. (c) Geometrically, V is a plane in R3 passing through the origin. (d) A basis for V is {(-3, 6, 2), (1, 0, 2)}.
(a) To show that V is a subspace of R3, we need to verify that it satisfies three conditions:
The zero vector is in V: T(0) = 0, so 0 is in V.
V is closed under vector addition: If v1, v2 are in V, then T(v1+v2) = T(v1) + T(v2) = v1 + v2, which means that v1+v2 is in V.
V is closed under scalar multiplication: If v is in V and a is a scalar, then T(av) = aT(v) = av, which means that av is in V.
Therefore, V is a subspace of R3.
(b) To find an equation that defines V, we can solve for the values of x, y, and z that satisfy T(x, y, z) = (x, y, z). This gives us the system of equations:
x + 2z = x
y - 6x - 2z = y
2x - 2z = z
Simplifying, we get:
2z = 0
y - 6x = 0
So the equation that defines V is y - 6x = 0, or equivalently, 6x - y = 0.
(c) Geometrically, V is a plane in R3 that passes through the origin. This is because it is defined by a linear equation with two variables, which corresponds to a two-dimensional subspace of R3 that contains the origin.
(d) To find a basis for V, we can solve the equation 6x - y = 0 for y, which gives us y = 6x. This means that any vector in V can be written as (x, 6x, z), where z is any real number. Therefore, a basis for V is {(1, 6, 0), (0, 0, 1)}.
To know more about vector,
https://brainly.com/question/31737683
#SPJ11
Eight pairs of data yield the regression equation y = 55.8 +2.79x. Predict y for x = 3.1. Round your answer to the nearest tenth. A. 47.2 B. 175.8 C. 55.8 D. 71.1 E. 64.4
The given regression equation is y = 55.8 + 2.79x, which means that the intercept is 55.8 and the slope is 2.79.
To predict y for x = 3.1, we simply substitute x = 3.1 into the equation and solve for y:
y = 55.8 + 2.79(3.1)
y = 55.8 + 8.649
y ≈ 64.4 (rounded to the nearest tenth)
Therefore, the predicted value of y for x = 3.1 is approximately 64.4. Answer E is correct.
To know more about regression equations refer here
https://brainly.com/question/30738733
SPJ11
Let G be a group of order 312. Apply Sylow's Theorem to prove that G has a normal p-subgroup for some prime p.
Sylow's Theorem states that for any prime factor p of the order of a group G, there exists a Sylow p-subgroup of G. Let n_p denote the number of Sylow p-subgroups in G. Then, n_p is congruent to 1 mod p and n_p divides the order of G. In the case of G with order 312, the prime factorization of 312 is 2^3 * 3 * 13. By Sylow's Theorem, there exists a Sylow 2-subgroup of order 8, a Sylow 3-subgroup of order 3, and a Sylow 13-subgroup of order 13. Since 8 and 13 are coprime, the number of Sylow 2-subgroups and Sylow 13-subgroups must be 1. Thus, both subgroups are normal in G.
Sylow's Theorem is a powerful tool in group theory that enables us to analyze the structure of a finite group by studying its subgroups. A Sylow p-subgroup of a group G is a maximal p-subgroup of G, i.e., a subgroup of G of order p^k, where k is the largest integer such that p^k divides the order of G. Sylow's Theorem states that for any prime factor p of the order of a group G, there exists a Sylow p-subgroup of G. Moreover, any two Sylow p-subgroups are conjugate in G, which means that they are essentially the same from the perspective of the group structure. This fact can be used to prove important results such as the existence of normal subgroups in G.
In the case of G with order 312, Sylow's Theorem guarantees the existence of Sylow 2-subgroups, Sylow 3-subgroups, and Sylow 13-subgroups. The number of Sylow p-subgroups for each prime factor p is determined by the congruence n_p ≡ 1 mod p and the divisibility n_p | |G|. Since 8 and 13 are coprime, it follows that the number of Sylow 2-subgroups and Sylow 13-subgroups must be 1. This implies that both subgroups are normal in G, which means that they are invariant under conjugation by elements of G. The existence of normal subgroups is a fundamental property of group theory that has many applications in algebra, number theory, and geometry.
To know more about Sylow's Theorem visit:
https://brainly.com/question/29282070
#SPJ11
In need your help please
Mrs. Phillips is making room in a closet for hoarding toilet paper. Using the Fermi process, she wants to estimate the number of rolls of toilet paper she can fit into a rectangular section of a closet with dimensions of (length 48 inches) (by width 84 imches) the toilet paper has the diameter 5 inches, height 4 inches.
(1)What us the volume of closet space
(2)what is the volume of one roll of toilet paper [use 3.4 for pie and round to the nearest while number]
(3) How many rolls of toilet paper can fit into the closet space
(1) The volume of closet space = 161,280
(2) The volume of one roll of toilet paper = 265 cubic inches
(3) The number of rolls of toilet paper can fit into the closet space = 608 rolls.
Given that,
The length of rectangular section = 48 inches
The width of rectangular section = 84 inches
The diameter of toilet paper = 5 inches
Height of toilet paper = 4 inches
The volume of the wardrobe space can be calculated by multiplying the rectangular section's length, breadth, and height.
As a result,
The closet's volume is roughly 161,280 cubic inches (48 x 84 x height).
The volume of one roll of toilet paper can be calculated using the volume of a cylinder formula (V = πr²h) with a diameter of 5 inches and a height of 4 inches.
Therefore,
One roll of toilet paper has a volume of around 265 cubic inches, rounded to 3.4.
To get the maximum number of rolls that can fit in the closet, divide the closet volume by the volume of one roll of toilet paper.
As a result, approximately 608 rolls of toilet paper can fit in the closet's rectangular part.
Learn more about the rectangle visit:
https://brainly.com/question/2607596
#SPJ1
if x=3t4 7x=3t4 7 and y=4t−t2y=4t−t2, find the following derivatives as functions of tt .
The value of derivative dx/dt = 12t³ and dy/dt = 4-2t.
To find the derivatives of x and y as functions of t, we'll calculate dx/dt and dy/dt.
For x=3t⁴, the derivative dx/dt is 12t³. For y=4t-t², the derivative dy/dt is 4-2t.
Now, let's break down the steps in the explanation:
1. Identify the functions x and y: x=3t⁴, y=4t-t².
2. Calculate the derivative of x with respect to t:
dx/dt = d(3t⁴)/dt = 3 * d(t⁴)/dt = 3 * (4t³) = 12t³.
3. Calculate the derivative of y with respect to t:
dy/dt = d(4t-t²)/dt = d(4t)/dt - d(t²)/dt = 4 - 2t.
4. Write the final derivatives: dx/dt = 12t³, dy/dt = 4-2t.
To know more about derivative click on below link:
https://brainly.com/question/25324584#
#SPJ11
find the value t0 such that the following statement is true: p(-t0 ≤ t ≤ t0) = .90 where df = 14.
Thus, the value of t0 such that the probability of 't' falling between -t0 and t0 is equal to 0.90 for a t-distribution with 14 degrees of freedom is approximately 2.145.
The problem here is asking us to find the value of t0, such that the probability of t falling between -t0 and t0 is equal to 0.90. In other words, we are looking for the two-tailed critical value for a t-distribution with 14 degrees of freedom.
Know more about the t-distribution
https://brainly.com/question/17469144
#SPJ11
why is the radius of a hemisphere with a volume of 548 cm, to the nearest tenth of a centimeter?
Answer:
15.0
Step-by-step explanation:
1
DUE TODAY NEED HELP WELL WRITTEN ANSWERS ONLY!!!!!!!!!!!!
A survey was given to a random sample of voters in the United States to ask about their preference for a presidential candidate. The percentage of people who said they preferred Candidate A was 53%. The margin or error for the survey was 4.5%. Which of the following is not a reasonable value for theactual percentage of the population that prefers Candidate A?
a
50.3%
b
49.6%
c
56.9%
d
57.9%
The percentage which is not a reasonable value for the actual percentage of the population that prefers Candidate A is 57.9%.
Given that,
A survey was given to a random sample of voters in the United States to ask about their preference for a presidential candidate.
The percentage of people who said they preferred Candidate A was 53%.
The margin of error for the survey was 4.5%.
There are some percentages in the option.
We have to find the percentage which cannot be the actual percent of the population that prefers Candidate A for the given situation.
Sample percentage = 53%
Margin of error = 4.5%
Actual population can be in the range of 53% ± 4.5%.
The range is (57.5, 48.5).
The percentage which does not fall in the range is 57.9%.
Hence the correct option is d.
Learn more about Margin of Error here :
https://brainly.com/question/29419047
#SPJ1
the period of a simple pendulum is 1 s on earth. when brought to a planet where g is one-tenth that on earth, its period becomes
a.√10 s
b.10 s
c.1/10 s
d.1/√10 s
The period of a simple pendulum is 1 s on Earth. when brought to a planet where g is one-tenth that on earth, its period becomes (d) 1/√10 s.
The period of a simple pendulum is given by the equation T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
On Earth, the period is 1 s, which means that 1 = 2π√(L/gEarth).
When the same pendulum is taken to a planet where g is one-tenth that on Earth, the equation becomes T = 2π√(L/(g/10)).
We want to find the new period, so we can solve for T: T = 2π√(L/(g/10)) = 2π√(10L/g).
We know that the length of the pendulum does not change, so we can substitute L from the first equation into the second equation: T = 2π√(10/gEarth).
We can simplify this equation by dividing the numerator and denominator of the square root by gEarth:
T = 2π√(10/gEarth) * (√gEarth/√gEarth) = 2π√(10gEarth/gEarth^2) = 2π√(10/9.81) s.
Therefore, the answer is (d) 1/√10 s.
Know more about pendulum here:
https://brainly.com/question/26449711
#SPJ11
Jazmin takes a ride share service home from the airport. The ride share service charges $5 as an initial cost to pick her up, and $2. 25 for every mile to her final destination. Jazmin's ride home cost a total of $38. 75.
Write an equation to represent the situation. Let m represent the number of miles to her home. Do not use any spaces or extra symbols
The equation representing the situation is:
5 + 2.25m = 38.75
Let's break down the equation step by step.
Jazmin's ride home consists of two components: an initial cost of $5 to pick her up and a variable cost based on the distance traveled, which is $2.25 for every mile to her final destination.
To represent the total cost of the ride, we add the initial cost to the variable cost. The variable cost is calculated by multiplying the rate of $2.25 per mile by the number of miles traveled, represented by the variable 'm'.
Therefore, the equation becomes:
Total Cost = Initial Cost + Variable Cost
38.75 = 5 + 2.25m
This equation states that the total cost of Jazmin's ride home, which is $38.75, is equal to the initial cost of $5 plus the variable cost of $2.25 multiplied by the number of miles traveled, denoted by 'm'.
By solving this equation, we can find the value of 'm', which represents the number of miles to Jazmin's home.
Learn more about linear equation here:
https://brainly.com/question/2030026
#SPJ11
The ratio of red marbles to blue marbles in a bag of 600 red and blue marbles was 7 to 5 if one of the marbles is drawn from the bag what is the probability that the marble will be blue
The probability that the selected marble will be blue is 5//12
How to determine the probability that the marble will be blueFrom the question, we have the following parameters that can be used in our computation:
Marbles = 600
Red to blue marbles = 7 to 5
This means that
Red : blue = 7 : 5
The probability that the marble will be blue is calculated as
P = Blue/Blue + Red
substitute the known values in the above equation, so, we have the following representation
P = 5/(5 + 7)
Evaluate the sum
P = 5/12
Hence, the probability that the marble will be blue is 5//12
Read more about probability at
https://brainly.com/question/31649379
#SPJ1
find an interval of t-values such that c(t)=(cost,sint)c(t)=(cost,sint) traces the lower half of the unit circle (in the counter-clockwise direction).
The interval of t-values that traces the lower half of the unit circle (in the counter-clockwise direction) is π ≤ t ≤ 2π.
To find the interval of t-values that traces the lower half of the unit circle, we need to determine the range of t-values that corresponds to the angles in the lower half of the unit circle. In the unit circle, the coordinates of a point on the circle can be represented as [tex](cos(t),sin(t))[/tex] where t represents the angle in radians.
For the lower half of the unit circle, the y-coordinate [tex]sin(t)[/tex] is negative, indicating a downward direction. Since sin(t) is negative for angles greater than π less than or equal to 2π, the interval of t-values that traces the lower half of the unit circle is π ≤ t ≤ 2π.
For more questions like Coordinates click the link below:
https://brainly.com/question/22261383
#SPJ11
If we were to repeat an experiment a large number of times and calculate a statistic such as the mean for each experiment, the distribution of these statistics would be called
a) the distributional distribution
b) the error distribution
c) the sampling distribution
d) the test outcome
The sampling distribution is the distribution of a statistic that is calculated from repeated samples of a population. The correct option (c) the sampling distribution.
In other words, it represents the distribution of sample means, sample variances, or other sample statistics that are calculated from multiple samples drawn from the same population.
It helps in making inferences about the population parameter based on the observed statistics from different samples.
The distributional distribution and the error distribution are not standard statistical terms. The test outcome is the result of a statistical test, which is not necessarily related to the distribution of a statistic.
To know more about sampling distribution refer here :
https://brainly.com/question/31465269#
#SPJ11
15- the proportion of the variation in the dependent variable y that is explained by the estimated regression equation is measured by the _____.
The proportion of the variation in the dependent variable y that is explained by the estimated regression equation is measured by the coefficient of determination, R-squared.
In simple linear regression, the coefficient of determination (R-squared) is used to measure the proportion of the variation in the dependent variable (y) that is explained by the estimated regression equation. It is calculated as the ratio of the explained variation to the total variation. Mathematically, it can be represented as:
R-squared = Explained variation / Total variation
where, explained variation is the sum of squares of the regression (SSR) and total variation is the sum of squares of the residuals (SSE). Therefore, R-squared can also be written as:
R-squared = SSR / (SSR + SSE)
The value of R-squared ranges from 0 to 1, where a value of 1 indicates that all the variation in the dependent variable is explained by the regression equation. A higher value of R-squared indicates a better fit of the regression line to the data.
For more questions like Regression click the link below:
https://brainly.com/question/28178214
#SPJ11
Tom's tambourine has an inner ring with a diameter of 15 centimeters. What is the inner circumference of the tambourine? Use 3. 14 for π.
i will send points pls help
The inner circumference of Tom's tambourine is approximately 47.1 centimeters.
In summary, the inner circumference of Tom's tambourine is approximately 47.1 centimeters.
The circumference of a circle can be calculated using the formula C = πd, where C is the circumference and d is the diameter. Given that the diameter of the inner ring is 15 centimeters, we can calculate the inner circumference as follows:
C = π * 15
C ≈ 3.14 * 15
C ≈ 47.1 centimeter
Therefore, the inner circumference of Tom's tambourine is approximately 47.1 centimeters when using the value of 3.14 for π.
Learn more about circumference here
https://brainly.com/question/28757341
#SPJ11
The rate of fuel wood consumption (in millions of cubic meters per year) in a certain country t years after 1980 is given approximately by the function c(t) = 75.40.071. The rate of new tree growth (in Millions of cubic meters per year) years after 1980 is given approximately by the function g(t) = 60 -6.81 0.08 Set up the definite integral giving the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991. The definite integral giving the amount of depletion of the forests is dt.
The definite integral giving the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991 is 447.84 million cubic meters.
To find the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991, we need to calculate the difference between the amount of fuel wood consumed and the amount of new trees grown during this period, and then integrate this difference over the period from 1980 to 1991.
The amount of fuel wood consumed during this period can be found by integrating the function c(t) over the interval [0, 11], where t is measured in years from 1980:
∫[0,11] c(t) dt = ∫[0,11] (75.40 + 0.071t) dt
= [tex][75.40t + 0.0355t^2[/tex]] from t=0 to t=11
= [tex](75.40(11) + 0.0355(11)^2) - (75.40(0) + 0.0355(0)^2)[/tex]
= 829.4 million cubic meters
Similarly, the amount of new trees grown during this period can be found by integrating the function g(t) over the interval [0, 11]:
∫[0,11] g(t) dt = ∫[0,11] (60 - 6.81t + 0.08t^2) dt
= [tex][60t - 3.405t^2 + 0.0267t^3][/tex] from t=0 to t=11
= [tex](60(11) - 3.405(11)^2 + 0.0267(11)^3) - (60(0) - 3.405(0)^2 + 0.0267(0)^3)[/tex]
= 381.98 million cubic meters
Therefore, the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991 is:
∫[0,11] (c(t) - g(t)) dt = ∫[0,11] ([tex]75.40 + 0.071t - 60 + 6.81t - 0.08t^2[/tex]) dt
= [tex][15.40t + 1.905t^2 - 0.0267t^3][/tex] from t=0 to t=11
= ([tex]15.40(11) + 1.905(11)^2 - 0.0267(11)^3) - (15.40(0) + 1.905(0)^2 - 0.0267(0)^3)[/tex]
= 447.84 million cubic meters
Therefore, the definite integral giving the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991 is:
∫[0,11] (c(t) - g(t)) dt = 447.84 million cubic meters.
for such more question on integral
https://brainly.com/question/27746495
#SPJ11
The definite integral to find the amount of depletion of forests due to excess fuel wood consumption over new growth from 1980 to 1991 is ∫[0,11] (c(t) - g(t)) dt = 447.84 million cubic meters.
We want to find the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991. To do this, we need to calculate the integral of the difference between the rate of fuel wood consumption and the rate of new tree growth over the interval [0,11], which corresponds to the years from 1980 to 1991.
Using the given functions, we have:
c(t) = 75.40 + 0.071t (rate of fuel wood consumption)
g(t) = 60 - 6.81 × 0.08t (rate of new tree growth)
So, the difference between the two rates is:
c(t) - g(t) = 75.40 + 0.071t - 60 + 6.81 × 0.08t
= 15.40 + 0.4732t
The definite integral of this difference over the interval [0,11] is:
∫[0,11] (c(t) - g(t)) dt
= ∫[0,11] (15.40 + 0.4732t) dt
= 15.40t + 0.2366t^2 |[0,11]
= (15.40 × 11 + 0.2366 × 11^2) - (15.40 × 0 + 0.2366 × 0^2)
= 169.40 + 278.44
= 447.84 million cubic meters
So, the amount of depletion of the forests due to the excess of fuel wood consumption over new growth from 1980 to 1991 is approximately 447.84 million cubic meters.
To learn more about definite integral click here: brainly.com/question/29974649
#SPJ11
Mr Deaver 's new car cost $20,000. After one year its value had decreased by 25%. What was the car's value after one year?
Main answer: The car's value after one year was $15,000.
Supporting explanation:
The cost of Mr. Deaver's new car was $20,000. After one year, the car's value decreased by 25%. Therefore, the car's value after one year can be found by subtracting the 25% decrease from the original cost of the car:
25% of $20,000 = 0.25 × $20,000 = $5,000
Subtracting $5,000 from $20,000 gives us the car's value after one year:
$20,000 - $5,000 = $15,000
Therefore, the car's value after one year was $15,000.
Know more about car's value here:
https://brainly.com/question/29087474
#SPJ11
15
19
A
n=12
B n - 24
C n=144
D
n=14
The solution is: The correct option would be C because each term is being multiplied by 6 to get the next term.
The first step is to determine if the sequence is arithmetic or geometric. In a geometric sequence, the ratio of two consecutive terms is constant.
This constant term is called the common ratio, r.
This means that
144/24 = 864/144 = 6
The formula for determining the nth term, Tn of a geometric sequence is expressed as
Tn = ar^(n - 1)
Where
a represents the first term of the sequence
r represents the common ratio
n represents the number of terms
From the given information,
a = 24, r = 6
The expression for the nth term would be
24 x 6^n - 1
The correct option would be C because each term is being multiplied by 6 to get the next term.
For more about geometric sequence
brainly.com/question/4617980
#SPJ1
complete question:
Which expression models the series progression 24, 144, 864,5184....A. 24 x 6^n B. 4 x 6^n C. Multiplying by sixes D. 24
Across all T-accounts, the sum of debits must ALWAYS equal the sum of credits.
A. False
B. Neither true nor false
C. True
D. Both true and false
C: True. The accounting equation, which is the foundation of all accounting principles, is based on the concept that for every debit entry, there must be an equal credit entry. This principle is reflected in T-accounts, which are used to track the financial transactions of a business.
T-accounts are a visual representation of the accounting equation, where debits are recorded on the left side of the T-account and credits are recorded on the right side. The sum of the debits and credits for each account is calculated and displayed at the bottom of the T-account.
If the sum of debits is not equal to the sum of credits, it indicates that an error has occurred in the recording of financial transactions. This is known as an unbalanced entry, and it must be corrected before the financial statements can be prepared accurately.
Therefore, it is always true that across all T-accounts, the sum of debits must equal the sum of credits. This principle ensures that the accounting records are accurate and reliable, providing stakeholders with a clear and complete picture of a company's financial position.
Learn more about T-accounts here:
https://brainly.com/question/29830578
#SPJ11