Answers
Answer:
Positive charges: 2
Negative charges: 1
Overall charge: +1
Explanation:
In Diagram B we have the chemical element Helium (He). You can see in the Periodic Table that He has an atomic number of 2 and an atomic mass of approximately 4.
The atomic number is equal to the number of protons, so He has 2 protons. The protons are the positive charges in the atom, so the number of positive charges is 2. That is invariable, if the number of protons - or the atomic number - of an atom changes, it changes its identity.
In the drawing, we can see that the nucleus is composed of 2 protons (2 'p' particles) and 2 neutrons (2 'n' particles). The atomic mass is calculated as the number of protons and neutrons, so 2 protons+ 2 neutrons = 4.
The surrounding particle with an 'e' is an electron. So, we have 1 electron. Electrons are negative charges, so the number of negative charges is 1.
Now, we can calculate the overall charge. We add the positive charges (protons) and negative charges (electrons). Each proton has a +1 charge, whereas each electron has a -1 charge. Finally, we perform the addition:
Overall charge= (number of protons x charge) + (number of electrons x charge) = (2 x (+1)) + (1 x (-1)) = (+2) + (-1) = +1
Related Questions
Determine the average rate of change of B from t=0 s to t=262 s
A=2B
Time (s)= 0, 131, 262
Concentration of A (M)= .720, .420, .120
Answers
The average rate of change of B from t=0 s to t=262 s is -0.00114 M/s
How to find the average rate of change?To determine the average rate of change of B, we need to calculate the change in B over the given time interval (0 to 262 seconds), and then divide by the time interval.
A = 2B
Therefore, B = A/2
At t = 0s, B = .720/2 = .360 M
At t = 262s, B = .120/2 = .060 M
The change in B is thus:
change in B = B(t=262s) - B(t=0s) = .060 - .360 = -.300 M
The average rate of change of B over the time interval from t = 0s to t = 262s is:
average rate of change = change in B / time interval = (-.300 M) / (262 s - 0 s) = -.300 M/262 s = -0.00114 M/s
So the average rate of change of B from t=0 s to t=262 s is -0.00114 M/s
To know more about average rate of change visit: https://brainly.com/question/28744270
#SPJ4
How many protons are in an isotope of sodium with a mass number of 25? M1 B) 14 C) 15 D) 25 E) 32
Answers
There are 11 protons in an isotope of sodium with the mass number of 25.
What is meant by isotopes?Atoms with same number of protons but different numbers of neutrons are called as isotopes. They share almost the same chemical properties, but have different masses and therefore physical properties.
Isotopes are atoms belonging to same element, having same atomic number Z, but different mass number A. For example, carbon-12, carbon-13 and carbon-14 are three isotopes of element carbon with mass numbers as 12, 13 and 14 respectively. How do you identify an isotope?
Generally, isotopes are specified by the name or symbol of the particular element and immediately followed by a hyphen and mass number.
To know more about isotopes, refer
https://brainly.com/question/14220416
#SPJ4
How many moles of ammonia gas (NH3) would occupy a 0.43L container at STP
Answers
Answer:
0.0192 moles
Explanation:
One mole of any gas occupies 22.414 L at S.T.P
setting up mole and volume ratio;
mole : volume
1 : 22.414
X : 0.43
X = 0.43/22.414
X = 0.0192 moles
A dog's cells carry out many processes at once. Some cells are involved in muscle contraction and some are involved in growing fur.
Which statement tells the most important factor that allows cells to keep accomplishing their many processes?
Cells constantly produce usable energy in the form of ATP
Cells contain genes from two individuals, and the combination of genes result in genetic variation
New cells are always being made from old ones in the process of meiosis.
The phospholipid bilayer of the cell membrane is selectively permeable.
Answers
The statement that tells the most important factor that allows cells to keep accomplishing their many processes is A. Cells constantly produce usable energy in the form of ATP
How are cells able to accomplish their processes?ATP (adenosine triphosphate) is the primary energy currency of cells. It is used to power the many chemical reactions that take place within cells, including things like muscle contraction, nerve impulse conduction, cell growth and division, and the transport of molecules across cell membranes. Without a constant supply of ATP, cells would not be able to carry out these processes and would quickly die.
The combination of genes from two individuals resulting in genetic variation is also important, but it is more related to the diversity of living organisms and its evolution than to the basic functions of the cells.
Find out more on Cells at https://brainly.com/question/2166757
#SPJ1
What is the chemical formula for the ionic compound whose unit cell is shown? (A and B are cations; X is an anion.)
Answers
The chemical formula is AB3X, A occupies all the corners & B occupies the faces, So the contribution = ½ × 6 = 3 . X occupies body center So contribution= 1,So atomic formula= AB3X
What is Chemical formula?
A chemical formula is a way of presenting information about the chemical ratios of atoms that make up a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes other symbols such as parentheses, dashes, parentheses, commas, and plus and minus signs
What is chemical compound?
A chemical compound is a chemical substance composed of two or more different chemical elements held together by chemical bonds. It can be either a molecular compound composed of atoms held together by covalent bonds, or an ionic compound composed of ions held together by ionic bonds. Compounds can be composed of elements from the same group, or from different groups.
To know more about Chemical formula,
brainly.com/question/29031056
#SPJ1
In a highly basic solution, pH = 13, the dominant form of glycine is: NH2—CH3+—COO-.
Answers
The predominant form of glycine in a strongly basic solution with a pH of 13 is NH2—CH3+—COO-. For amino acids with neutral R groups, the population of amino acids in solution will have a net positive charge at any pH below the amino acid's pI.
Are there D and L forms of glycine?A flexible addition that prevents protein aggregation during refolding, heat treatment, and crystallization is glycine amide (GlyAd), an usually amidated amino acid.
Since it is the only amino acid without a chiral carbon atom, glycine is the simplest and smallest and has a hydrogen atom as a side chain. As a result, it does not produce stereoisomers and does not have the L or D configurations found in other amino acids.
learn more about glycine
https://brainly.com/question/14886525
#SPJ4
Which of the following molecules or ions will exhibit delocalized bonding?
NO2- , NH4+ , N3-
Answers
N3- (nitride ion) is the molecule or ion that will exhibit delocalized bonding.
Delocalized bonding occurs when electrons are distributed over more than one atom in a molecule or ion. It is a type of bonding that is different from the traditional localized bonding, where electrons are associated with specific atoms. Delocalized electrons can move freely across the entire molecule or ion, making it more stable and less reactive.The Nitride ion (N3-), is an example of a molecule that exhibits delocalized bonding. In N3-, the electrons from the three nitrogen atoms are delocalized, creating a stable and less reactive species.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ4
What is [H1+] in a solution prepared by mixing the following solutions
12.5 mL of 2.30 M HCl
27.8 mL of 3.60 M HCl
18.2 mL of 6.90 M HCl
15.0 mL of water
Answers
Protium, an isotope of hydrogen, contains the hydrogen atom (H1). An interstellar cloud called the H I region.
How many protons are in H1?Community of British NVC H1, an area of health. An isotope of hydrogen, the hydrogen atom (H1) protium, is present. In the interstellar medium, a cloud called the H I zone. CTA code H01 Anatomical Therapeutic Chemical Classification System subclass: Pituitary and hypothalamic hormones and analogues.
Water and organic compounds are two examples of molecules that contain the majority of the hydrogen that exists on Earth. One proton, one electron, and no neutrons are present in each atom of the most prevalent isotope of hydrogen (symbol 1H).
It is officially referred to as protium because this isotope's nucleus only contains one proton. Hydrogen-1 is regarded as a stable isotope because the proton's decay has never been detected.
To learn more about hydrogen refer to:
https://brainly.com/question/19813237
#SPJ4
What volume of 0.500 M HCl is needed to reach the first equivalence point?
A 1.00-g sample of piperazine hexahydrate is dissolved in enough water to produce 100.0 mL of solution and is titrated with 0.500 M HCl.
pKb1=4.22
pKb2=8.67
The Ph at the first equivalence pt is 7.56.
Answers
The goal of the titration is to identify the equivalence point, or the point at which chemically equivalent amounts of the reactants have been combined.
What do you mean by titrated?According to the definition of titration, it is "the method of estimating the amount of a material A by adding calibrated increments of substance B, the titrant, with which it reacts until exact chemical equivalency is obtained (the equivalence point)".
Titration is a method of chemical analysis where the amount of a sample's ingredient is determined by adding an exact known amount of a different substance to the measured sample, which the desired constituent reacts with in a specific, known proportion.
The equivalence point, or the point at which chemically equivalent amounts of the reactants have been combined, is to be found through titration. Depending on the stoichiometry of the reaction, the number of reactants that have been combined at the equivalence point.
To learn more about titration refer to:
https://brainly.com/question/186765
#SPJ4
You need to dissolve CaCl2 in water to make a mixture that is 32.0% calcium chloride by mass. If the total mass of the mixture is 373.7 grams, what masses of CaCl2 and water should be used?
Answers
A total of 373.7 grams of the combination should be made up of 254.7 grams of water and 119 grams of CaCl2.
What does "mass" mean?In physics, mass is a way to numerically express inertia, a fundamental property of all matter. In essence, a body of matter is the resistance it provides to a change in its speed or position brought on by the application of a force. The more mass a body has, the smaller the change that a force causes is.
One of a body's essential properties is its mass. It was commonly believed to be related to the quantity of matter in a physical body before to the discovery of the atom and the science of particle physics.
Since the solution contains 32.0% CaCl2 by mass, we may calculate the mass of CaCl2 by multiplying the total mass by 32.0(35%).
0.320 x 373.7 = 119.584g = 119 g CaCl2
Simply deduct the amount of CaCl2 from the total mass to determine the mass of H2O:
mass H2O = 373.7 g - 119 g = 254.7g H2O
To learn more about mass refer to:
brainly.com/question/837939
#SPJ4
Based on the Law of Conservation of Mass, what mass of products form when baking soda decomposes?
NaHCO3 → Na₂CO3 + H₂O + CO₂
Give your answer to the correct number of significant figures.
(g) Sodium Chloride = [?]
Answers
Based on the Law of Conservation of Mass, the mass of products form when baking soda decomposes is 168 g/mole.
What is law of conservation of mass?The law of conservation of mass or principle of mass conservation states that for any system closed to all transfers of matter and energy, the mass of the system must remain constant over time, as the system's mass cannot change, so quantity can neither be added nor be removed.
From the equation of NaHCO3 → Na₂CO3 + H₂O + CO₂ , we have
Mass of baking soda = 2 x molar mass
Molar mass of NaHCO₃ = 84.007 g/mole
Mass of baking soda = 2 x 84.007 g/mole
Mass of baking soda = 168.014 g/mole= 168 g/mole
Therefore, based on the Law of Conservation of Mass, the mass of products form when baking soda decomposes is 168 g/mole.
Learn more about Law of Conservation of Mass at:
https://brainly.com/question/19038178
#SPJ1
In what forms are you more likely to see the density of a gas reported? Select all that apply. g/L g/cm2 g/mL kg/cm3 Part B Which units are appropriate for expressing atmospheric pressures? Select all that apply. atm N Pa kg/m2 Part C Which is most likely to be a gas at room temperature and ordinary atmospheric pressure? Select all that apply. F2 Br2 H2O K2O
Answers
At room temperature and ordinary atmospheric pressure, the density of a gas is normally stated in g/L or g/mL, atmospheric pressures are typically expressed in atm or Pa, and [tex]\rm F_2[/tex] and [tex]\rm Br_2[/tex] are likely to be gases.
The density of a substance is a measure of how much mass it has in a given volume.
Part A: The density of a gas is typically reported in g/L or g/mL. These units express the mass of the gas per unit volume.
Part B: Atmospheric pressures are typically expressed in atm or Pa (pascals). These units measure the force exerted by the atmosphere per unit area.
Part C: [tex]\rm F_2[/tex] and [tex]\rm Br_2[/tex] are both likely to be gases at room temperature and ordinary atmospheric pressure, as they are both diatomic molecules with low boiling points.
Therefore, the density of a gas is typically reported in g/L or g/mL, atmospheric pressures are typically expressed in atm or Pa, and [tex]\rm F_2[/tex] and [tex]\rm Br_2[/tex]are likely to be gases at room temperature and ordinary atmospheric pressure.
Learn more about density here:
https://brainly.com/question/29775886
#SPJ12
Your question is incomplete but most probably your full question was,
Part A: In what forms are you more likely to see the density of a gas reported? Select all that apply. g/L, g/cm2, g/mL and kg/cm3
Part B: Which units are appropriate for expressing atmospheric pressures? Select all that apply. atm, N, Pa and kg/m2.
Part C: Which is most likely to be a gas at room temperature and ordinary atmospheric pressure? Select all that apply. [tex]\rm F_2, Br_2, H_2O\ and\ K_2O[/tex]
Which of the following has an effect on the magnitude of the equilibrium constant?
a. increasing the pressure, in a gas-phase reaction
b. adding more of a reactant
c. change in temperature
d. adding a catalyst
e. removing products as they are formed
Answers
The following has an effect on the magnitude of the equilibrium constant: c. change in temperature.
What has effect on the magnitude of equilibrium constant?The only thing that changes an equilibrium constant is the change of temperature. Position of equilibrium is changed if you change the concentration of something present in mixture.
Increasing the temperature decreases value of the equilibrium constant. When the forward reaction is endothermic, increasing the temperature increases the value of equilibrium constant. And position of the equilibrium also changes if you change the temperature.
Catalyst does not affect the chemical equilibrium and it only speeds up a reaction.
To know more about equilibrium constant, refer
https://brainly.com/question/3159758
#SPJ4
Pearson Education Chapter 4 Covalent Bonds quiz [ Just Send Me A Image of it or write it down ]
Answers
Covalent bond is a bond which is formed by the sharing of electrons between the two atoms.
What is a covalent bond?
Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ1
Suppose two systems, each composed of three particles represented by circles, have 30 J of total energy.
System A 10 J ooo −−−−−−
System B 12 J o −−−−
10 J o −−−−
8 J o −−−−
How many energetically equivalent ways can you distribute the particles in system A?
How many energetically equivalent ways can you distribute the particles in system B?
Answers
Entropy, S, is a thermodynamic function that rises with the degree of freedom (number of energetically equivalent ways to arrange the components).
Entropy: What Does It Mean?Entropy is a scientific concept and observable physical feature that is commonly related to a state of chaos, unpredictability, or uncertainty. Since labor is created by organized molecular motion, entropy measures the molecular disorder or unpredictable nature of a system.
How many distributions of the particles in system B are there that are energetically equivalent?In system B, there are three distinct energy levels. To maintain the overall energy of 30 J, each particle can only occupy one energy level. By rearranging the particles among the layers, one may count how many equivalent ways there are.
Learn more about energetically equivalent ways refer to :
brainly.com/question/27364338
#SPJ4
An experiment will
start with 15g of
carbon and 75g of
oxygen. What is the
predicted mass of the
product?
Answers
Only when the masses of the reactants and products are equal can a chemical reaction occur.
How do you predict the mass of a product?Product mass is equal to reactant mass. The term "moles" should be inserted between each coefficient and formula so that the equation can be read in "moles." An equation's "mole-mole factor" is the ratio of the moles of any two substances.
A chemical reaction can only take place if the mass of the reactants and products are equal. Therefore, if you start with a specific mass and it interacts, the products will have the same mass.
Examine what transpires when the chemical splits into smaller, more recognizable products like water, carbon dioxide, or any of the gaseous elements in order to forecast the outcomes of such a reaction. Synthesis reactions frequently happen when pure elements are mixed.
The complete question is:
An experiment will start with 15g of carbon and 75g of oxygen. What is the predicted mass of the product?
To learn more about predicted mass refer to:
https://brainly.com/question/6502905
#SPJ1
How many of the following molecules have sp hybridization on the central atom?
C2Br2 CS2 O3 H2S
A) 3
B) 1
C) 2
D) 0
Answers
2 – C2H6 and HCN O 4 contain at least one pi bond.
What is molecules?Molecules are the smallest unit of any chemical element or compound that has the properties of that substance. They are made up of atoms bonded together in various combinations, and have a definite chemical structure and composition. Molecules can be made up of single atoms, such as oxygen (O2), or of different types of atoms, such as water (H2O). Molecules are the building blocks of all matter, and are the basis of all living and non-living things.
C2Cl4 and Cl2CO do not contain any pi bonds. Pi bonds are formed by the overlap of atomic orbitals between two atoms. C2H6 and HCN O 4 contain double bonds between the atoms, which are made up of pi bonds. C2Cl4 and Cl2CO do not have any double bonds, so they do not contain any pi bonds.
To know more about molecules click-
https://brainly.com/question/26044300
#SPJ4
Arrange calcium, rubidium, sulfur, and arsenic in order of decreasing electronegativity.
S > As > Rb > Ca
As > S > Ca > Rb
As > S > Rb > Ca
S> As > Ca> Rb
None of these orders is correct.
Answers
Difference In order to reduce our rough electro-negative, we must add arsenic, sulfur, rubidium, and calcium. If we follow the predictable sequence, all the participants are here in the 16th group, followed by arsenic in the 15th group, calcium in the second group, and rubidium in the first group.
And we know that electron density rises from the left to the right based on periodic trends. Negativity in elections rises from left to right. found in the periodic table. Accordingly, the elements on the left are more lateral positive and less slightly negative, while the elements on the right are more slightly negative and less electorally positive. Sulfur is therefore at the utmost level right if we walk through them. sulfur follows.
To find more elections refer here:
https://brainly.com/question/3710013
#SPJ4
(D.) S> As > Ca> Rb, If calcium, rubidium, sulphur, and arsenic are arranged in decreasing sequence of electronegativity, S> As > Ca> Rb results.
The capacity of an atom to draw a pair of bound electrons determines its electronegativity. The Pauling scale is the most often applied. Cesium and francium have values that are less electronegative than fluorine, which is given a value of 4.0. From top to bottom, the electronegativity decreases, and from left to right, it gradually increases. Fluorine is consequently the element with the highest electronegative potential, whilst francium is one of the lowest. An atom's or functional group's propensity to draw electrons to itself is known as electronegativity, which is a chemical characteristic.
learn more about electronegativity here:
https://brainly.com/question/17762711
#SPJ4
is h2o2 fixed product of alkyen in ozone analysis ??
Answers
H2O2 (hydrogen peroxide) is the reagent to look out for because as seen below it turns:
- Ends of alkenes with 1 –H = Aldehydes but Carboxylic Acids instead
Consider the fire fighting measures shown. Why does sodium require a Class D fire extinguisher instead of one that might spray water?
A. It may create table salt, sodium chloride.
B. The sodium will react with the water, creating an acid.
C. A regular fire extinguisher might break the sodium down.
D. The sodium will react with the water, causing a flash fire.
Answers
Answer:
D
Explanation:
yurr
What is pseudoscience? How is it different from non-science?
Answers
Pseudoscience is described as consisting of statements, beliefs, or practices that claim to be both scientific and factual but are incompatible with the scientific method.
The main difference between Pseudoscience and non- science is that pseudo-science is set up to look for evidence that supports its claims, while non-science do not look for evidence that might prove it false.
What is Pseudoscience?Pseudoscience is described as a proposition, a finding or a system of explanation that is presented as science but that lacks the rigor essential to the scientific knowledge.
A non-science on the other hand is an area of study that is not scientific, especially one that is not a natural science or a social science that is an object of scientific inquiry.
Learn more about Pseudoscience at: https://brainly.com/question/604092
#SPJ1
Which model most accurately represents the current view of the structure of the atom? Planetary Model Probability Model Planetary model
Probability model
Answers
With regard to the current understanding of atom structure, that planet best captures the model.
Describe an atom.A chemical element's atom is a particular type of particle of substance. A positively charged electron or many negatively charged electrons encircle the central nucleus of an atom. Protons and neutrons, two relatively hefty particles that make up the positively charged nucleus, may be present.
What is the cause of Atom's shutdown?We have chosen to abandon Atom in order to enhance our dedication to bringing quick and dependable application development to the cloud using Microsoft's Visual Code and GitHub Codespaces, even though the goal of expanding the software maker community still exists.
To know more about Atom visit:
https://brainly.com/question/13654549
#SPJ4
A. river
C. alpine
This glacier
originated high in
the mountains.
What type of
glacier is it?
B. island
D. sailing
Answers
Alpine glaciers create or widen valleys by ejecting dirt and other objects in their path. Aside from Australia, they are spread across every landmass in high piles.
What kind of landmass is that?
An landmass is a group of land that is typically divided by an ocean, causeway, or canal. America and Latin America, which are divided by a canal, are two examples of landmasses. It is possible to extend this brief article about a location or feature.
What is the world's largest landmass?
The largest continent, Asia, runs from the western Pacific Ocean to the eastern Mediterranean Sea. Asia is home to more than 40 nations. China, India, and Indonesia are a few of the most populous nations on the planet.
To know more about landmass visit:
https://brainly.com/question/20914115
#SPJ1
A thief plans to steal a gold sphere with a radius of 28.1 cm from a museum. If the gold has a density of 19.3 g/cm3 , what is the mass of the sphere in pounds? [The volume of a sphere is V=(4/3)πr3 .]
Express your answer in pounds to three significant figures.
Answers
The gold sphere has a radius of 92893 cm³. The mass of the sphere is 1.7 × 10⁶ g which is equal to 3585 pounds.
What is density?Density of an object is the measure of its mass per unit volume. It describes how closely its particles are packed. Density is the ratio of mass to the volume.
Gold is dense solid with a density of 19.3 g/cm³.
radius of the sphere = 28.1 cm
Volume of the sphere = 4/3 πr³
V = 4/3 π (28.1 cm³) = 92893 cm³
Mass of the sphere = volume × density
= 92893 cm³ × 19.3 g/cm³
= 1.7 × 10⁶ g
1 g = 0.02 pounds
then 1.7 × 10⁶ g = 1.7 × 10⁶ × 0.022 = 3585 pounds
Therefore, the mass of the sphere is 3585 pounds.
Find more on density:
https://brainly.com/question/15164682
#SPJ1
why am i so black
(What is melanin and how does it work)
Answers
Answer:
you are a monkey JK
melanin is DARK SIR
Explanation:
heheh
watersheds get their water from what 2 places select 2 correct answers
options:
a) surface water
b) people
c)ground water
d) Animals
Answers
Surface water and ground water are two sources of watershed. Thus, option A is correct,
What is watershed?A watershed is an area of land and water where water from many sources collects at a location below the surface of the land. The area of land that surrounds a water source and empties into a single location at a lower elevation is called the watershed.
Surface water is defined as water from rivers, oceans, etc. that is on the same level as the land. Groundwater is the liquid that lies below the surface of the earth or the sea.
For instance, the geographical area that drains into a lake's watershed would include include the streams that enter the lake as well as the streams' final destination, the lake. Large watersheds that include the watersheds of numerous smaller rivers and streams are referred to as drainage basins.
To know more about water sources, visit:
https://brainly.com/question/984136
#SPJ1
How many of the following molecules contain at least one pi bond?
C2H6 Cl2CO C2Cl4 CS2
Answers
3 is the number of the following molecules contain at least one pi bond.
What makes a pi bond?Pi bond (π bond) : A link that is created when the p orbitals of two nearby atoms cross, perpendicular to any sigma bonds that may also exist between the same atoms. a second line that runs parallel to the line that symbolises the sigma bond in a Kekule structure or bond-line structure.When two lobes of an orbital on one atom overlap with two lobes of an orbital on another atom, a covalent chemical connection known as a pi bond is formed. This overlap happens laterally.The electron density is concentrated above and below the plane of the nuclei of the bonding atoms, and the orbitals overlap side by side to create a pi bond ( bond).Learn more about pi bond refer to :
https://brainly.com/question/15776790
#SPJ4
if you done this may i please get help asap!!!thanks
Answers
Answer:
Explanation:
Damien Gilley. ... Leandro Erlich. ... Tang Yau Hoong. ... Erik Johansson. ... Julian Beever. ...
Borane (BH3) is very unstable and quite reactive.
1- explain the source of instability.
The central boron atom lacks an ........of electrons, and it is therefore very unstable and reactive.
Answers
BH3 is an unstable compound because: Bh3 molecule is an electron deficient molecule in nature since the 6 electrons are around the 'B' atom.
Why is borane very unstable?Because of its Lewis acidic nature, borane is very reactive. This indicates that it is easily able to receive electrons from other molecules, making it extremely vulnerable to reactions.
The extreme instability of the chemical borane further adds to its reactivity. It's not unstable, BH3. As you may recall, sp3 forms four bonds and is generally more energetically stable than sp2, which has a planar shape.
Therefore, like in NH3, a single pair with roughly the proper amount of energy can activate the fourth bond. To learn more about boranes and its qualities, read the article. Because it has an open orbital, borane is a Lewis acid. Borane is a chemical that is highly reactive, rapidly ignites in the air, and reacts with water.
To learn more about borane refer to:
https://brainly.com/question/14638825
#SPJ4
Which element is oxidized in the reaction below>I- + MnO4- + H+ -> I2 + MnO2 + H2O
a) I
b) H
c) O
d) Mn
Answers
I is the element which is oxidized in the given reaction. Therefore, the correct option is option A.
An atom, ion, or molecule undergoes oxidation when one of its electrons is lost or its oxidation status is raised. It can be identified by the oxidation number of an element rising, the removal of hydrogen, the loss of electrons, or the addition of oxygen.
[tex]\rm I^- + MnO_4^- + H^+ \rightarrow I_2 + MnO_2 + H_2O[/tex]
Oxidation state on reactant side are:
The oxidation state of the iodide ion ([tex]\rm I^-[/tex]) is 1.
The oxidation state of the permanganate ion ([tex]\rm MnO_4^-[/tex]) is +7.
The oxidation state of the hydrogen ion ([tex]\rm H^+[/tex]) is 1.
Oxidation state on product side are:
Iodine ([tex]\rm I_2[/tex]) has an elemental state with oxidation state 0.
With an oxidation state of +4, manganese dioxide ([tex]\rm MnO_2[/tex]) is a metal.
The oxidation state of water ([tex]\rm H_2O[/tex]) is -2 for oxygen and +1 for hydrogen.
Iodine has undergone oxidation because its oxidation state went from -1 to 0.
Therefore, the correct option is option A.
To know more about oxidation, here:
https://brainly.com/question/13182308
#SPJ12