Answer:
a) Acidified potassium dichromate solution is used to test for the presence of a primary or secondary alcohol.
b) The orange color of the potassium dichromate solution is reduced to green when it reacts with an alcohol.
c) The oxidation of a primary alcohol produces a carboxylic acid.
d) The oxidation of a secondary alcohol produces a ketone.
e) The dichromate test does not work for tertiary alcohols because they cannot be further oxidized. Methylpropan-2-ol is a tertiary alcohol with the chemical structure:
CH3
|
CH3—C—OH
|
CH3
Since there are no hydrogen atoms attached to the carbon atom bearing the hydroxyl group, it cannot be oxidized.
a) A simple test for the presence of a carboxylic acid group is the addition of sodium hydrogencarbonate solution to the compound. The reagent reacts with the carboxylic acid to produce carbon dioxide gas.
Reagent: Sodium hydrogencarbonate solution
Observation: Effervescence (bubbling) due to the release of carbon dioxide gas.
b) To confirm that the gas produced in the hydrogencarbonate test is carbon dioxide, it can be tested with limewater. Carbon dioxide turns limewater milky/cloudy due to the formation of calcium carbonate.
c) The hydrogencarbonate test is not conclusive proof that a carboxylic acid group is present in a completely unknown compound because some other functional groups such as phenols and alcohols can also react with the reagent and produce carbon dioxide. Therefore, additional tests such as the dichromate test or Tollens' test may be needed to confirm the presence of a carboxylic acid group.
(please could you kindly mark my answer as brainliest and a follow would be really nice)
when sodium reacts with water, sodium hydroxide and hydrogen are produced. the balanced equation for this reaction is:
When sodium reacts with water, sodium hydroxide and hydrogen are produced. The balanced equation for this reaction is 2 Na (s) + 2 H2O (l) → 2 NaOH (aq) + H2 (g)
Sodium is an alkali metal that reacts vigorously with water, releasing hydrogen gas and forming an aqueous solution of sodium hydroxide.
The reaction between sodium and water is a highly exothermic reaction, meaning that it releases a large amount of heat energy.
The balanced chemical equation for this reaction is as follows:2 Na (s) + 2 H2O (l) → 2 NaOH (aq) + H2 (g)
This equation can be interpreted in several ways. One interpretation is that two moles of sodium react with two moles of water to produce two moles of sodium hydroxide and one mole of hydrogen gas.
Another interpretation is that the mass of the reactants is equal to the mass of the products, since this is a balanced equation.
To know more about balanced equation, refer here:
https://brainly.com/question/12192253#
#SPJ11
A mixture of 50 mol % benzene and 50 mol % toluene is distilled under exactly the same conditions as in Part a. Using Figure 4. 3, determine the distillation temperature and the percentage composition of the first few drops of distillate
The distillation temperature would be > 80 degrees. The composition of the few drops of the distillate would be 40℅ benzene and 60℅.
The boiling point of a liquid is the temperature at which the vapor pressure of the liquid, a pure compound, or a combination equals 1 atm.
We are aware that pure benzene has a boiling point of 80 °C.
Pure toluene has a boiling point of 106 °C.
As benzene has a lower boiling point than toluene, it distills first. Thus, the distillation temperature is greater than 80 °C.
The mixture contains 40 percent benzene and 60 percent toluene by percentage.
Distillation is a process used to separate components of a mixture based on differences in their boiling points. The mixture is heated to vaporize the components, and then the vapor is condensed back into a liquid form. The condensed liquid contains a higher concentration of the more volatile components with lower boiling points.
Distillation is widely used in various industries, including chemical, pharmaceutical, and food production, to purify substances, extract desired components, or separate different chemical compounds. For example, it can be used to purify water, extract essential oils from plants, or separate crude oil into different fractions such as gasoline, diesel, and kerosene.
To learn more about Distillation visit here:
brainly.com/question/29037176
#SPJ4
Below is the graph that the student attached to her report. NaOH HCI 26 25.5 24.5 p 24 23.5 23 22.5 22 21.5 10 Time (min) Let's think how we can use it to calculate the heat of neutralization reaction. Notice: In this experiment, the student measured the change in temperature not for the system itself but for the surroundings (solution). The solution is diluted and we can safely consider its specific heat and its density to be the same as for pure water: c 4.18 J/g-oCand d 1.00 g/cm3(a) What is the change in temperature recorded in this experiment? AT Did the system loose or gain energy in this experiment? Explain(b) Calculate how much heat (in joules) transferred between the system and the surroundings in this experiment.(c) Calculate the molar heat of the neutralization reaction (in kJ/mol) (d)Is the neutralization reaction endo or exothermic? Can you suggest one reason why this can be true?(d)Is the neutralization reaction endo or exothermic? Can you suggest one reason why this can be true?
The solution is diluted, and its specific heat and its density to be the same as for pure water:
(a) The change in temperature recorded in this experiment is AT = -1.5°C.
(b) The heat transferred between the system and the surroundings can be calculated using the formula Q = mcAT, where m is the mass of the solution, c is its specific heat capacity, and AT is the change in temperature.
Assuming that the solution has a mass of 100 g and a specific heat capacity of 4.18 J/g-°C, then the heat transferred is 100 x 4.18 x (-1.5) = -627 J.
(c) The molar heat of the neutralization reaction can be calculated using the formula q = -Q/n, where q is the molar heat, Q is the heat transferred, and n is the number of moles of the reaction.
Since 1 mole of HCl and 1 mole of NaOH are used in the reaction, n = 1. Thus, the molar heat of the neutralization reaction is -627/1 = -627 kJ/mol.
(d) The neutralization reaction is exothermic, as it releases energy in the form of heat.
This is due to the fact that the reaction between NaOH and HCl is highly energetically favorable, with the products having a lower energy than the reactants.
to know more about specific heat refer here:
https://brainly.com/question/11297584#
#SPJ11
Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. Which statement correctly describes the extraction process?
A.HCl protonates the carboxylate, and the fatty acid is found in the aqueous layer.
B.The carboxyl group is deprotonated, and the fatty acid is dissolved in the polar solvent.
C.HCl protonates the carboxylate, and the fatty acid is found in the organic layer.
D.The carboxyl group is deprotonated, and the fatty acid is dissolved in the nonpolar solvent
The statement which describes the extraction process correctly is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer." This lead to free acid formation. Thus, the correct option is C.
What is extraction of hexane?Researchers separated fatty acid sodium salts from glycerol by adding HCl and then extracting with hexanes. This is an acid-base extraction, which involves separating compounds based on their solubility differences. The extraction process can be explained as follows: When HCl is added to the mixture, it reacts with the fatty acid sodium salt to produce the corresponding fatty acid and sodium chloride.
The carboxylate group in the fatty acid sodium salt is protonated by HCl, making it more polar and water-soluble. As a result, the fatty acid is converted to its free acid form, which is insoluble in water but soluble in organic solvents like hexanes. Therefore, the fatty acid will move into the organic layer and can be extracted with hexanes. Thus, the correct statement that describes the extraction process is "HCl protonates the carboxylate, and the fatty acid is found in the organic layer."
Therefore, the correct option is C.
Learn more about Extraction process here:
https://brainly.com/question/28297691
#SPJ11
The citric acid cycle enzyme, fumarase, catalyzes the conversion of fumarate to malate: (15 points) Fumarate+ H2O → Malate The turnover number, kcat, for fumarase is 800/sec. The Km of fumarase for its substrate is 5uM. (a) In an experiment using 2 nM of fumarase, what is Vmax? (b) The cellular concentration of fumarate is 47.5 μM. what is Vo when [fumarate 47.5 μM? (c) What is the catalytic efficiency of fumarase?
Answer:
a) Vmax= 964,320,000,000,000 molecules/m3·sec
b) Vo=0.089 mol/L·sec
c) catalytic efficiency of fumarase=1.6 × 10^8 M-1 s-1
Explanation:
(a) To calculate the Vmax, we use the following formula:
Vmax = kcat × [ET] ,Where [ET] is the total enzyme concentration.
The given fumarase enzyme concentration = 2nM = 2 × 10^9 molecules/m3
[ET] = 2nM × 6.02 × 10^23 molecules/mole× 1mole/10^9nM = 1.2044 × 10^15 molecules/m3
Vmax = kcat × [ET]Vmax = 800/sec × 1.2044 × 10^15 molecules/m3= 964,320,000,000,000 molecules/m3·sec
(b) To calculate the Vo when fumarate is 47.5 μM, we use the following formula:
Vo = Vmax × [S]Km + [S]
Where [S] is the concentration of the substrate, fumarate.
Vmax = 964,320,000,000,000 molecules/m3·sec[S] = 47.5μM = 47.5 × 10^-6 mol/L
Km = 5uM = 5 × 10^-6 mol/L
Vo = Vmax × [S]Km + [S]Vo = (964,320,000,000,000 molecules/m3·sec × 47.5 × 10^-6 mol/L
)5 × 10^-6 mol/L + 47.5 × 10^-6 mol/L
Vo = 0.089 mol/L·sec
(c) The catalytic efficiency of fumarase is given by the ratio of kcat to the Km of the substrate catalyzed by an enzyme.
Catalytic efficiency = kcatKm= 800/sec5uM= 1.6 × 10^8 M-1 s-1
Therefore, the catalytic efficiency of fumarase is 1.6 × 10^8 M-1 s-1.An enzyme with a high catalytic efficiency has a high turnover number (kcat) and low substrate concentration (Km).
The enzyme fumarase has a very high catalytic efficiency of 1.6 × 10^8 M-1 s-1, indicating that it can catalyze the reaction with a high rate even at a low concentration of the substrate.
To know more about catalytic efficiency refer here: https://brainly.com/question/30467284#
#SPJ11
A change that is useful for the environment and living things is called
The change that is useful for the environment and living things is called "positive environmental change."
Positive environmental change refers to any alteration or modification in the environment that improves or benefits living organisms' well-being. Examples of positive environmental changes include reducing pollution, conserving water, using renewable energy sources, and recycling waste products. Positive environmental change is essential to ensure a sustainable future and to maintain the planet's biodiversity.
It can be achieved by implementing new policies, practices, and technologies that promote sustainable development and reduce the negative impact on the environment. Positive environmental change can also help to address climate change and other environmental challenges faced by humanity. By taking positive steps to protect the environment, we can ensure that future generations can also enjoy a healthy, prosperous, and sustainable planet.
To learn more about positive environmental change, here
https://brainly.com/question/30033700
#SPJ4
What do an engine using gasoline to power a car and
mixing glue and laundry powder to create putty have in commen
An engine using gasoline to power a car and mixing glue and laundry powder to create putty are both examples of chemical reactions.
Gasoline is considered an energy source due to its ability to release stored chemical energy in the form of heat and mechanical work when it is burned in an engine. When gasoline is ignited in an engine, the chemical energy stored in its molecular bonds is released, causing a rapid combustion reaction that generates heat and expanding gases that push the pistons and create mechanical work.
The energy content of gasoline is typically measured in units of joules or British thermal units (BTUs), which are used to quantify the amount of energy released during combustion. Gasoline is a widely used and important energy source, but its combustion also produces harmful emissions that contribute to air pollution and climate change.
To learn more about Gasoline visit here:
brainly.com/question/29991915
#SPJ4
both the cno cycle and the proton-proton chain combine 4 h nuclei to produce 1 he nucleus. would those two processes release the same amount of energy per he nucleus produced? why or why not?
The CNO cycle and the proton-proton chain don't release the same amount of energy per He nucleus produced.
Let's understand this in detail:
1. The CNO cycle produces more energy than the proton-proton chain per He nucleus produced. The proton-proton chain and CNO cycle produce energy by nuclear fusion in the sun's core.
2. In the core of the Sun, the proton-proton chain occurs. It converts four hydrogen nuclei (protons) into one helium nucleus via a series of nuclear reactions. This reaction liberates a significant amount of energy through gamma rays and neutrinos.
3. The CNO cycle also takes four hydrogen nuclei, producing one helium nucleus. The key difference between these two processes is the method in which helium is produced.
4. In the proton-proton chain, two protons combine to form deuterium. This then combines with another proton to form helium-3, and two helium-3 nuclei combine to form helium-4.
5. In the CNO cycle, hydrogen is fused with carbon, nitrogen, and oxygen isotopes to create helium. The CNO cycle releases more energy than the proton-proton chain per He nucleus produced because it has more intermediate steps.
5. The CNO cycle requires more heat and pressure to function because it involves carbon, nitrogen, and oxygen isotopes, which are heavier elements. The proton-proton chain is simpler because it only involves hydrogen and doesn't require as much energy.
Learn more about CNO cycle: What is the net equation for CNO cycle? https://brainly.com/question/19469825
#SPJ11
6.
P
If I have 2.9 L of H₂ at a temperature of 306K and a pressure of 1.02 atm, how many moles of
H₂ gas are present?
V
n
R
T
The number of moles of H₂ gas present in the container is 0.118 moles.
How to calculate number of moles?The number of moles of a gas can be calculated using the following formula:
PV = nRT
Where;
P = pressureV = volumen = no of molesR = gas law constantT = temperatureAccording to this question, 2.9L of H₂ at a temperature of 306K and a pressure of 1.02 atm. The number of moles can be calculated as follows:
1.02 × 2.9 = n × 0.0821 × 306
2.958 = 25.1226n
n = 2.958/25.1226
n = 0.118 moles
Learn more about moles at: https://brainly.com/question/26416088
#SPJ1
An element has an electron configuration of [Ar]4s^2 3d^10 4p^5. Which of the following is/are TRUE about the element? Select ALL statements that are true about the element. a. The element is Se. b. The element is a halogen c. The element has one fewer electron than the following noble gas. d. When the element reacts with a metal, the elements tends to gain one electron to form an anion with a 1-charge.
An element with an electron configuration of [Ar]4s²3d¹⁰4p⁵ is Bromine(Br). The statements that are true about the element are B, C, and D.
A. The element is Bromine(Br). Bromine is a nonmetal and belongs to the family of elements called halogens, which is group 17. It is situated in period four of the periodic table. The electron configuration of Se is [Ar]4s²3d¹⁰4p⁵, which shows that it contains seven valence electrons.
Therefore, the statement "The element is Se" is incorrect.
B. Br is a halogen because it belongs to group 17, and all halogens possess a similar electron configuration, which is ns²np. Therefore, the element is a halogen and the statement is true.
C. Br has one less electron than the previous noble gas (Krypton) because Br has 35 electrons, whereas Kr has 36 electrons. So the statement "The element has one fewer electron than the following noble gas" is true.
D. The tendency of the element Br to gain one electron when it reacts with the metal to form a negatively charged ion is due to its valence electron configuration. Because Br contains seven valence electrons, it prefers to gain 1 electron and form an anion with a -1 charge. Therefore statement D is also true.
Overall, All the statements are TRUE except for statement A.
To know more about Bromine(Br), refer here:
https://brainly.com/question/29028678#
#SPJ11
Identify the major mechanistic pathway when 1-chloropentane is treated with KCN.a. E1
b. E2
c.SN1
d. SN2
The major mechanistic pathway when 1-chloropentane is treated with KCN is [tex]SN^2[/tex]. So, the correct option is d.
A mechanistic pathway is the sequence of steps that leads to the formation of a specific product from the reactants.
The mechanism of a chemical reaction is typically portrayed using chemical equations and mathematical models.
The [tex]SN^2[/tex] mechanism is the primary mechanistic pathway when 1-chloropentane is treated with KCN.
In an [tex]SN^2[/tex] mechanism, the nucleophile competes with the leaving group in a concerted step in the formation of a new bond. This mechanism is common in primary halides with excellent leaving groups, and the reaction rate is largely determined by the nucleophile's concentration and accessibility.
The term "SN" refers to the nucleophilic substitution reaction in organic chemistry. It stands for "Substitution Nucleophilic."
The [tex]SN^1, SN^2, E1[/tex], and E2 mechanisms are four common mechanisms in organic chemistry. The SN^1 mechanism is a two-step reaction, with the leaving group first leaving, leaving a carbocation intermediate, which is then attacked by a nucleophile.
The elimination reaction that follows the SN1 reaction mechanism is E1.
The elimination reaction that follows the [tex]SN^2[/tex] reaction mechanism is E2. Therefore, the correct option is d.
Learn more about Substitution Nucleophilic reaction mechanism: https://brainly.com/question/30631335
#SPJ11
where is the equilibrium shifts when the concentration of h2(gas) is increased by adding more hydrogen gas to the container at constant temperature?
The equilibrium shift when the concentration of H2 (gas) is increased by adding more hydrogen gas to the container at constant temperature is towards the right side of the reaction equation.
Let us understand how the reaction shifts with the help of the following chemical reaction equation. N2(g) + 3H2(g) ⇌ 2NH3(g).
Adding more H2 gas to the container at constant temperature will increase the concentration of H2 gas.
The reaction will shift towards the product side (right side of the reaction equation) to balance the reaction equation.
The concentration of NH3 gas will increase, and the concentration of N2 gas and H2 gas will decrease.
The reaction quotient (Qc) is used to predict the direction of the reaction.
If Qc is greater than Kc, the reaction shifts towards the left side of the reaction equation.
If Qc is less than Kc, the reaction shifts towards the right side of the reaction equation.
.f Qc is equal to Kc, the reaction is at equilibrium state with no shift in the reaction.
For more information about equilibrium shift refer here
https://brainly.com/question/15164034?
#SPJ11
There are ________ mol of carbon atoms in 4 mol of C4H8O2
There are 16 mol of carbon atoms in 4 mol of C4H8O2
The chemical formula C4H8O2 tells us that each molecule of this compound contains 4 carbon atoms, 8 hydrogen atoms, and 2 oxygen atoms. Therefore, to determine the number of carbon atoms in 4 mol of C4H8O2, we need to multiply the number of moles by the number of carbon atoms per molecule:
Number of carbon atoms = number of moles × number of carbon atoms per molecule
Number of carbon atoms = 4 mol × 4 carbon atoms per molecule
Number of carbon atoms = 16 mol
So there are 16 mol of carbon atoms in 4 mol of C4H8O2. It's important to note that the chemical formula of a compound gives us information about the ratio of atoms in the compound, which allows us to determine the number of atoms in a given amount of the compound.
To know more about the Carbon, here
https://brainly.com/question/30282405
#SPJ4
Predict the organic starting material needed to prepare the following product upon treatment with warm hydrochloric acid. CI Cl 석C HCI 40 *C H,C CH HC
Vinyl chloride (CH2=CHCl) is most likely the initial substance required to prepare the product after treatment with heated hydrochloric acid. A hydrochlorination procedure creates 1,2-dichloroethane as a byproduct by adding HCl across the vinyl chloride double bond.
Alkenes frequently undergo the hydrochlorination process, in which HCl is added across the double bond to produce a chloroalkane byproduct. In this instance, a vinyl chloride, which possesses a double bond between the carbon and chlorine atoms, is most likely the beginning substance. Warm HCl fractures the double bond, allowing the H and Cl atoms to add across the carbon atoms to create 1,2-dichloroethane as a byproduct. This response can be modelled as:
CH2 = CHCl + HCl ClCH2CH2Cl
All in all, this is a straightforward reaction that can be performed on a small scale in a lab or on a larger scale in industry to make 1,2-dichloroethane, which is utilised as a solvent and in the creation of vinyl chloride monomer.
learn more about hydrochloric acid here:
https://brainly.com/question/15231576
#SPJ4
arrange the amino acids coded for in the translation portion of the interactive in the correct order, starting with the first amino acid at the top.
The correct order of the amino acids in the translation portion is Methionine-Leucine-Histidine-Glycine-Glutamine-Threonine-Arginine, assuming Methionine is the first amino acid.
The order of amino acids in a polypeptide chain is determined by the sequence of codons in the mRNA transcript during the process of translation. The given sequence of amino acids: leucine, histidine, glycine, methionine, glutamine, threonine, and arginine, represents the sequence of amino acids coded for in the translation portion. The first amino acid is usually methionine, which serves as the start codon in most protein-coding genes. Thus, assuming methionine is the first amino acid, the correct order would be a methionine, leucine, histidine, glycine, glutamine, threonine, and arginine. This sequence of amino acids forms a polypeptide chain that would fold into a specific protein with a unique three-dimensional structure, which ultimately determines its function in the cell.
learn more about amino acids here:
https://brainly.com/question/14583479
#SPJ4
which process is necessarily driven by an increase in the entropy of the surroundings? the vaporization of water the freezing of water the sublimation of dry ice the melting of ice
The process that is necessarily driven by an increase in the entropy of the surroundings is the vaporization of water.
What is entropy?Entropy is a measure of the degree of disorder or randomness in a system. In a system, entropy can either remain unchanged, increase or decrease. It depends on the direction of the process. It is said that natural processes tend to go towards a state of maximum entropy or disorder. This is known as the second law of thermodynamics.
The process of vaporization of water is the process in which water changes its phase from liquid to gas, by the absorption of heat energy. In this process, the entropy of the system increases due to the production of a more random, disordered state. The entropy of the surroundings also increases. Hence, it is the process that is necessarily driven by an increase in the entropy of the surroundings.
Full task:
Which of the following processes is necessarily driven by an increase in the entropy of the surroundings?
The condensation of waterThe sublimation of dry iceThe freezing of waterLearn more about entropy: https://brainly.com/question/15402023
#SPJ11
be sure to answer all parts. give two different ways to prepare the following compound by the diels-alder reaction.Preferred Pathway A: Less Reactive Pathway B:
The given compound can be prepared using the Diels-Alder reaction. The two different ways to prepare the given compound by the Diels-Alder reaction are as follows:
Preferred Pathway A: The first step is the preparation of cyclopentadiene. It is made by the deprotonation of cyclopentadiene using sodium hydroxide. The next step is the preparation of maleic anhydride. It is prepared by heating maleic acid. Now, the Diels-Alder reaction is carried out between the cyclopentadiene and maleic anhydride. This results in the formation of the given compound.
Less Reactive Pathway B: The first step is the preparation of a less reactive diene. Here, the less reactive diene is furan. It is obtained by the dehydration of furfural. The next step is the preparation of a less reactive dienophile. Here, the less reactive dienophile is ethyl vinyl ether. It is prepared by the reaction of ethanol and acetylene. Now, the Diels-Alder reaction is carried out between furan and ethyl vinyl ether. This results in the formation of the given compound.
To learn more about "diels-alder reaction", visit: https://brainly.com/question/21503302
#SPJ11
describe what happens to plane-polarized light when it passes through a solution of an optically active compound
When plane-polarized light passes through a solution of an optically active compound, it rotates the plane of polarization of the light. This phenomenon is referred to as optical rotation or rotary dispersion.
How does optical rotation occur?When a beam of unpolarized light passes through a solution of an optically active substance, its plane of polarization is rotated by an angle called the optical rotation angle. Optical activity is a property of a molecule's three-dimensional structure, which is why some molecules are optically active while others are not. The two isomers of a chiral molecule are enantiomers, which means they have the same physical and chemical properties but are mirror images of each other.
The optical rotation angle of each enantiomer is equal in magnitude but opposite in sign to that of the other enantiomer. When a racemic mixture of equal quantities of both enantiomers is studied, no optical rotation is observed. Because the rotations induced by each enantiomer cancel out. When plane-polarized light passes through a solution of an optically active compound, it rotates the plane of polarization of the light. This phenomenon is referred to as optical rotation or rotary dispersion. Optical rotation is defined as the rotation of the plane of polarization of linearly polarized light as it passes through a sample. The angle of rotation is determined by the molecular structure of the sample and the concentration of the sample in solution.
Learn more about Optical rotation here:
https://brainly.com/question/30669570
#SPJ11
determine the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the reaction: c(s) o2 (g) --> co2 (g) the change in enthalpy for this reaction is -349 kj/mol.
The enthalpy change when 18.6 g of carbon is reacted with oxygen according to the equation C(s) + O2(g) → CO2(g) is -540.6 kJ.
From the equation, the mole ratio of carbon to carbon dioxide is 1:1. Therefore, the number of moles of carbon reacted can be determined as follows:
Mass of carbon = 18.6 g
Molar mass of carbon = 12.01 g/mol
Number of moles of carbon = (18.6 g)/(12.01 g/mol) = 1.549 moles
Since the change in enthalpy for the reaction is given as -349 kJ/mol, we can calculate the enthalpy change for the given mass of carbon as follows: Enthalpy change = Number of moles of carbon × Change in enthalpy. Enthalpy change = 1.549 moles × (-349 kJ/mol).Enthalpy change = -540.6 kJ (rounded off to two significant figures)Therefore, the enthalpy change when 18.6 g of carbon is reacted with oxygen according to the given equation is -540.6 kJ.
More on enthalpy change: https://brainly.com/question/17056641
#SPJ11
(3marks) Question.07: Ammonia is produced when nitrogen and hydrogen gases react at high pressures and temperatures: N₂(g) + 3H₂(g) → 2NH3(g) At intervals, the system is cooled to between -10 °C and -20 °C, causing some of the ammonia to liquefy so that it can be separated from the remaining nitrogen and hydrogen gases. The gases are then recycled to make more ammonia An average ammonia plant might make 1000 metric tons of ammonia per day. When 4.0 x 107 L of hydrogen gas at 503 °C and 155 atm reacts with an excess of nitrogen, what is the maximu volume of gaseous ammonia that can be formed at 20.6 °C and 1.007 atm?
The volume of the ammonia that can be produced from the reaction that has been written is; 155 * 10^7 L
What is the ideal gas equation?We know that;
PV = nRT
For the hydrogen;
n = PV/RT
n = 155 * 4.0 x 10^7 /0.082 * 776
n = 620 * 10^7/63.63
n = 9.7 * 10^7 moles
Now the reaction equation is;
N₂(g) + 3H₂(g) → 2NH3(g)
3 moles of hydrogen produced 2 moles of ammonia
9.7 * 10^7 moles will produce 9.7 * 10^7 moles * 2 moles/ 3 moles
x = 6.5 * 10^7 moles
For the volume of the ammonia;
V = nRT/P
V = 6.5 * 10^7 moles * 0.082 * 293.6/1.007
V = 155 * 10^7 L
Learn more about ammonia:https://brainly.com/question/14672082
#SPJ1
if 2.5 kj of energy are absorbed, how many grams of silver are required if the temperature of the silver was increased by 7.5 oc? (the specific heat of silver is 0.2330 j/goc.)
The amount of silver required if the temperature of the silver was increased by 7.5°C is 170.94 g.
To calculate the amount of silver required if 2.5 kJ of energy is absorbed and the temperature of the silver increases by 7.5°C, we can use the formula:
q = m x c x ΔT
where
q = amount of energy absorbed (kJ)
m = mass of silver (g)
c = specific heat of silver (J/g°C)
ΔT = change in temperature (°C)
Converting the given values to the required units, we have:
q = 2.5 kJ = 2500 J
c = 0.2330 J/g°C
ΔT = 7.5°C
Plugging these values into the formula, we get:
2500 = m x 0.2330 x 7.5m = 170.94 g
Therefore, 170.94 g of silver is required if 2.5 kJ of energy is absorbed and the temperature of the silver increases by 7.5°C.
Learn more about specific heat here: https://brainly.com/question/27991746.
#SPJ11
When oxygen is available, sulfur dioxide is produced from the burning of sulfur. Which of the following word equations best represents this reaction? a. sulfur dioxide + oxygen sulfur dioxide b. sulfur + oxygen → sulfur dioxide c. sulfur dioxide → sulfur + oxygen d. sulfur → sulfur dioxide + oxygen
The correct answer is (b). The following word equation best represents this reaction: sulfur + oxygen → sulfur dioxide.
Sulfur dioxide (SO2) is produced when sulfur is burned in oxygen. The chemical reaction that occurs is:
S(s) + O2(g) → SO2(g)
This equation represents the burning of sulfur to produce sulfur dioxide in the presence of oxygen. Sulfur, when burned in the presence of oxygen, produces sulfur dioxide. In this chemical reaction, sulfur (S) reacts with oxygen (O2) to form sulfur dioxide (SO2). The reaction is exothermic, which means that it releases heat.
Sulfur dioxide is a major air pollutant and has significant impacts on human health. However, it also has immense importance in laboratories. It is used for the manufacture of sulphuric acid and is also used as a preservative.
In summary, the correct option is B, which is sulfur + oxygen → sulfur dioxide.
To know more about sulfur dioxide, refer here:
https://brainly.com/question/9720549#
#SPJ11
The correct word equation that represents the production of sulfur dioxide from the burning of sulfur in the presence of oxygen is **option b**: sulfur + oxygen → sulfur dioxide.
When sulfur is burned in the presence of oxygen, it undergoes a chemical reaction known as combustion. During this process, sulfur reacts with oxygen to form sulfur dioxide. The equation can be balanced as follows:
[tex]Sulfur (S) + Oxygen (O2) → Sulfur Dioxide (SO2)[/tex]
In this equation, sulfur and oxygen are the reactants, while sulfur dioxide is the product. It is important to note that the coefficients (numbers in front of the chemical formulas) should be adjusted to balance the equation, ensuring that the number of atoms on both sides is equal.
Learn more about sulfur dioxide here:
https://brainly.com/question/31142164
#SPJ11
Question: How many moles of H+ ions are present in the following aqueous solutions?(a) 1.40 L of 0.25 M perchloric acid(b) 6.8 mL of 0.92 M nitric acid(c) 2.6 L of 0.085 M hydrochloric acid
The number of moles of H+ ions present in the following aqueous solutions is as follows:-
(a) 1.40 L of 0.25 M perchloric acid= 0.35 mol H+ ions
(b) 6.8 mL of 0.92 M nitric acid= 0.00626 mol H+ ions
(c) 2.6 L of 0.085 M hydrochloric acid= 0.221 mol H+ ions
Molarity is used to determine the number of moles of a solute present in 1 liter of a solution.
(a) The molarity of perchloric acid is given as 0.25 M. Thus, we can find the number of moles of H+ ions present in the given solution using the below formula:-
Moles of solute = Molarity x Volume in litres= 0.25 x 1.40= 0.35 mol H+ ions
(b) The volume of the given nitric acid is 6.8 mL, i.e. 0.0068 L. Thus, the number of moles of H+ ions present in this solution can be calculated using the below formula:-
Moles of solute = Molarity x Volume in liters= 0.92 x 0.0068= 0.00626 mol H+ ions
(c) The volume of the given hydrochloric acid is 2.6 L. Thus, we can find the number of moles of H+ ions present in the given solution using the below formula:-
Moles of solute = Molarity x Volume in liters= 0.085 x 2.6= 0.221 mol H+ ions
Learn more about moles https://brainly.com/question/15356425
#SPJ11
If 20 moles of fuel are combusted in C4H8 + 6 O2 -> 4 CO2 + 4 H2O, how many moles of O2 are consumed?
If moles of fuel (butene) are combusted in air, the number of moles of oxygen gas produced is 120 moles.
How to calculate moles using stoichiometry?Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).
According to this question, 1 mole of butene reacts with 6 moles of oxygen gas to produce 4 moles of carbondioxide and 4 moles of water.
Based on the reaction, 1 mole of fuel reacts with 6 moles of oxygen gas.
This means that 20 moles of fuel will react with 120 moles of oxygen gas.
Learn more about stoichiometry at: https://brainly.com/question/9743981
#SPJ1
PCI3(g) + Cl2(g) = PCI3(9) K. = 6.5 At a certain point in time, a 1.00 L rigid reaction vessel contains 1.5 mol of PCI3(a). 1.0 mol of Cl2[g), and 2.5 mol of PCI3(g). Which of the following describes how the measured pressure in the reaction vessel will change and why it will change that way as the reaction system approaches equilibrium at constant temperature? a. The pressure will increase because Q K. c. The pressure will decrease because Q K.
Answer:
PCI3(g) + Cl2(g) ⟶ PCI3(Cl)(g) , K = 6.5At a given moment in time, a 1.00 L solid response vessel has 1.5 mol of PCI3(a), 1.0 mol of Cl2[g), and 2.5 mol of PCI3(g). The estimated pressure in the response vessel will alter is The pressure will decrease because Q < K. Answer.b
Explanation:
For the given reaction:PCI3(g) + Cl2(g) ⟶ PCI3(Cl)(g)K = 6.5.Here, the number of moles of reactants and products is given as:
Initial number of moles:
PCI3 = 1.5 molCl2 = 1.0 molPCI3(g) = 2.5 mol
We can calculate the initial partial pressures of the reactants and product as follows:
PPCI3 = (1.5 mol / 4 mol) x Ptotal = 0.375Ptotal
PCl2 = (1.0 mol / 4 mol) x Ptotal = 0.25Ptotal
PPCI3(Cl) = 0 moles / 4 moles x Ptotal = 0
So, Ptotal = 1 atm (given). Therefore, PPCI3 = 0.375 atmPCl2 = 0.25 atm
PPCI3(Cl) = 0 atm
The reaction quotient, Qc is given by:Qc = [PCI3(Cl)] / [PCI3] [Cl2]
On substituting the initial concentrations, we get:
Qc = (0) / (1.5) (1) = 0
The reaction quotient, Qc is less than the equilibrium constant, Kc. Therefore, the reaction will proceed in the forward direction to reach equilibrium. As the reaction proceeds forward, the concentration of PCI3 will decrease and the concentration of PCI3(Cl) will increase.
As a result, the total number of moles of gas in the container will decrease and the pressure will decrease.The equilibrium concentration of PCI3(Cl) will be determined by the value of the equilibrium constant, Kc. Since the value of Kc is quite large, the concentration of PCI3(Cl) will be much larger than the initial concentration of PCI3.
To know more about PCI3 refer here: https://brainly.com/question/13790245#
#SPJ11
where and when in which state is gold found in nature
notable states in the United States where gold is found include California, Alaska, Colorado, Nevada, and South Dakota.
when:(gold rushes)
California (1848-1855)
Colorado (1858-1861)
Alaska (1896-1899)
South Dakota (1874-1877)
Georgia (1828-1849)
Montana (1862-1864)
Nevada (1859-1864)
Oregon (1851-1861)
North Carolina (1799-1848)
What is/are the spectator ion(s) for the reaction of perchloric acid with sodium hydroxide? Select ALL of the spectator ions from the list below.a. Na+b. CO2c. O2d. Cl-
The spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-.The spectator ions are those ions that are present on both sides of the chemical equation but do not participate in the reaction.
These ions do not change their oxidation state or form new compounds. Therefore, they are considered to be spectators and are excluded from the overall ionic equation. The equation for the reaction of perchloric acid with sodium hydroxide is:HClO4 + NaOH → NaClO4 + H2O. Sodium ions and chloride ions are the spectator ions in this reaction. Sodium ions (Na+) are present on both sides of the equation, and they do not participate in any chemical reaction.
They remain in the same oxidation state and do not form any new compound. Hence, Na+ ions are spectator ions in this reaction. Similarly, the chloride ions (Cl-) are also present on both sides of the equation and are not involved in any reaction. Therefore, they are also spectator ions.
In summary, the spectator ions for the reaction of perchloric acid with sodium hydroxide are Na+ and Cl-. These ions are present on both sides of the equation but do not participate in any chemical reaction. They are considered spectators and are excluded from the overall ionic equation.
Know more about oxidation state here:
https://brainly.com/question/17161178
#SPJ11
What is the percentage by mass of hydrogen in glucose, C6H12O6?
Glucose has a molecular weight of 180.18 g/mol, while hydrogen has an atomic weight of 1.008 g/mol. As a result, glucose has a mass-based hydrogen content of around 7.48%.
With the molecular formula C6H12O6, or six carbon atoms, twelve hydrogen atoms, and six oxygen atoms, glucose is a simple sugar. The atomic weights of glucose's component atoms may be added to determine its molecular weight, which is 180.18 g/mol. We must ascertain the mass of the hydrogen atoms contained in one mole of glucose in order to calculate the proportion of hydrogen by mass in glucose. Twelve hydrogen atoms have a mass of 12.096 g/mol because their atomic weight is 1.008 g/mol. Hence, based on mass, glucose has a hydrogen concentration of approximately 7.48% (12.096/180.18 x 100%).
learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ4
The grades on a chemistry exam have an approximately normal distribution with a mean of 78 and a standard deviation of 5. Willa scores a 74.8 on the exam. What proportion of the students scored higher than her on the exam?
A. .9987
B. .64
C. .74
D. .26
The proportion of students that scored higher than Willa is 1 - 0.2626 = 0.7374 or approximately 0.74.
C. 0.74 is correct option.
The grades on a chemistry exam have an approximately normal distribution with a mean of 78 and a standard deviation of 5. Willa scores a 74.8 on the exam. What proportion of the students scored higher than her on the exam?
The proportion of students who scored higher than Willa on the exam can be found using the normal distribution table. Given the mean, μ = 78, and the standard deviation, σ = 5, the distribution of the scores is approximately normal.
Let's first standardize Willa's score. Standardized Score = Z-score.
The formula for Z-score is as follows:
Z = (X - μ) / σ
where, X is the raw score
μ is the mean, and
σ is the standard deviation.
Z = (74.8 - 78) / 5Z
= -0.64
Using the standard normal distribution table, we can find the proportion of students that scored higher than Willa. The area to the left of Willa's Z-score is 0.2626.
for such more question on proportion
https://brainly.com/question/24155045
#SPJ11
what is the difference between a polyprotic acid and a monoprotic acid?
A monoprotic acid only has one acidic proton per molecule, but a polyprotic acid can donate numerous protons per molecule and possesses more than one acidic proton.
The capacity of an acid to contribute protons (H+ ions) determines its strength. Each acidic proton in a polyprotic acid becomes tougher to remove as each donation results in a greater loss of negative charge. Hence, polyprotic acids are susceptible to partial or whole dissociation reactions and can have a variety of dissociation constants (Ka values). Phosphoric acid (H3PO4) and sulfuric acid are examples of polyprotic acids (H2SO4).
Monoprotic acids, on the other hand, only have one acidic hydrogen atom per molecule, which can give one proton. For monoprotic acids, the dissociation reaction is complete and can be described by a single dissociation constant (Ka). Acetic acid and hydrochloric acid (HCl) are examples of monoprotic acids (CH3COOH).
learn more about polyprotic acid here:
https://brainly.com/question/29993754
#SPJ4