the diffraction-limited resolution of a telescope 10 m long at a wavelength of 500 nm is 1.22x10-6 radians. the diameter of the collecting lens of the telescope is closest to 3.05 mm
To calculate the diameter of the collecting lens of the telescope, we can use the formula:
diameter = (1.22 x wavelength x focal length) / diffraction
We are given the diffraction-limited resolution (1.22x10-6 radians), the wavelength (500 nm), and the length of the telescope (10 m). However, we need to find the focal length of the telescope before we can solve for the diameter of the collecting lens.
We can use the formula:
focal length = length of telescope / 2
focal length = 10 m / 2 = 5 m
Now, we can substitute the values into the formula for diameter:
diameter = (1.22 x 500 nm x 5 m) / 1.22x10-6 radians
diameter = 3.05 mm
Therefore, the diameter of the collecting lens of the telescope is closest to 3.05 mm.
Learn more about diameter at
brainly.com/question/5501950
#SPJ11
Which of the following results in the production of a photoelectron that is ejected from the atom?a. Photoelectric interactionb. Compton interactionc. Coherent scatterd. Pair production
The correct answer is a. The process that results in the production of a photoelectron ejected from the atom is the Photoelectric interaction. This occurs when a high-energy photon interacts with an atom, transferring its energy to an electron, which is then ejected from the atom.
Photoelectric interaction results in the production of a photoelectron that is ejected from the atom. In this interaction, a photon is absorbed by an atom and transfers all of its energy to an electron, causing it to be ejected from the atom. This process is widely used in detectors for X-ray and gamma-ray radiation. Compton interaction, coherent scatter, and pair production do not produce photoelectrons in the same way as photoelectric interaction.
Learn more about Photoelectric interaction here:-
https://brainly.com/question/31263447
#SPJ11
Consider a long chain of point charges separated by a distance a = 1 nm. The chain is shown in the Fig., where q = 1 nC. Estimate how much work is needed in order to separate the leftmost charge from the chain (i.e. to move it to infinity)?
The work done in separating the charges is determined as 9 J.
What is the work done in separating the charges?The work done in separating the charges is equal to the product of electric force between the charges and the displacement of the charges.
W = Fx d
W = kq²/d² x d
W = kq²/d
where;
k is the Coulomb's constantq is the magnitude of the charged is the distance between the chargesThe work done in separating the charges is calculated as follows;
W = ( 9 x 10⁹ x ( 1 x 10⁻⁹)² ) / ( 1 x 10⁻⁹ )
W = 9 J
Learn more about work done here: https://brainly.com/question/8119756
#SPJ4
fm radio waves have frequencies between 88.0 and 108.0 mhz. determine the range of wavelengths for these waves. (enter your answers from smallest to largest.)
The range of wavelengths for FM radio waves is 2.78 m to 3.41 m. The speed of light, c, is approximately 3.00 x [tex]10^{8}[/tex] m/s. The wavelength, λ, is related to the frequency, f, by the equation λ = c/f.
To determine the range of wavelengths for FM radio waves, we need to find the wavelengths corresponding to the frequency range of 88.0 MHz to 108.0 MHz.
λmin = c/fmax = (3.00 x [tex]10^{8}[/tex] m/s) / (108.0 x [tex]10^{6}[/tex] Hz) = 2.78 m
λmax = c/fmin = (3.00 x [tex]10^{8}[/tex] m/s) / (88.0 x [tex]10^{6}[/tex] Hz) = 3.41 m
Therefore, the range of wavelengths for FM radio waves is 2.78 m to 3.41 m.
To know more about wavelengths, refer here:
https://brainly.com/question/13533093#
#SPJ11
starting from rest and moving with con a.one-third as large Second trial compared with the first trial? b. three times larger c.one-ninth as large d.nine times larger e.1/V3 times as large a.zero acceleration. b.an acceleration in the direction of its velocity. d.an acceleration directed toward the center of its path. e. an acceleration with a direction that cannot be determined from the gi 3.The vectorAis a) greater than A in magnitude -19 less than A in magnitude c) in the same direction as A d) in the direction opposite to A e) perpendicular to A 4.if the speed of a particle is doubled,what happens to its kinetic en a. It becomes four times larger. b.It becomes two times larger c.It becomes V2 times larger. d.It is unchanged. e.It becomes half as large
Starting from rest and moving with an acceleration, if the speed of a particle is doubled, its kinetic energy becomes:
a. four times larger.
This is because kinetic energy is calculated using the formula KE = 1/2 * m * v^2, where m is the mass and v is the velocity of the particle. When you double the velocity, the kinetic energy becomes four times larger since (2v)^2 = 4v^2.
To read more about acceleration click here:
brainly.in/question/14058495
#SPJ11
What are the main sources of energy thats not related to environmental energy
Non-environmental sources of energy include fossil fuels (such as coal, oil, and natural gas), nuclear energy, and certain forms of renewable energy.
Fossil fuels are one of the main sources of energy that are not considered environmentally friendly. They are derived from the remains of ancient plants and animals and are burned to produce energy. However, their combustion releases greenhouse gases and air pollutants, contributing to climate change and air pollution.
Nuclear energy is another source that is not directly related to environmental energy. While nuclear energy does not produce greenhouse gas emissions, it poses risks nuclear fission of radioactive waste disposal and the potential for accidents.
Certain forms of renewable energy, such as large-scale hydroelectric power and bioenergy from biomass combustion, also have environmental impacts. Hydroelectric dams can disrupt ecosystems and alter river flows, while biomass combustion can lead to deforestation and emissions of air pollutants.
It is important to note that the environmental impact of energy sources can vary, and efforts are being made to develop cleaner and more sustainable alternatives, including solar, wind, and tidal power, which harness the energy of the sun, wind, and ocean respectively. These sources have minimal direct environmental impacts compared to fossil fuels and nuclear energy.
Learn more about nuclear fission here
https://brainly.com/question/29221842
#SPJ11
What is the name of the method for determining egg quality by viewing eggs against a light?
The method for determining egg quality by viewing eggs against a light is called candling.
Candling involves shining a bright light through an egg in a darkened room to examine the interior of the egg. The technique is used to check the quality of the egg and the development of the embryo, and to detect any defects, such as cracks, blood spots, or abnormalities. Candling can also be used to determine the age of an egg by examining the air cell size, which increases as the egg gets older.
Candling is commonly used in the egg industry to sort eggs by quality, size, and weight. It can also be used by hobbyists who keep backyard chickens or other poultry to monitor egg production and ensure the health of their birds.
learn more about Embryo here:
https://brainly.com/question/30670971
#SPJ11
an industrial load consumes 100 kw at 0.8 pf lagging. if an ammeter in the transmission line indicates that the load current is 200 a rms, find the load voltage
An industrial load consumes 100 kw at 0.8 pf lagging. if an ammeter in the transmission line indicates that the load current is 200 a rms, the load voltage is 625 volts.
We are provided with information about an industrial load, specifically its power consumption, power factor, and current. Our goal is to determine the load voltage. First, we calculate the apparent power (S) using the formula S = P / PF, where P is the power and PF is the power factor. The power is given as 100 kW (kilowatts), and the power factor is stated as 0.8 (lagging). Dividing 100 kW by 0.8 gives us an apparent power of 125 kVA (kilovolt-amperes). Next, we utilize the relationship between apparent power, voltage, and current. The apparent power (S) is given by the formula S = V * I, where V represents voltage and I represents current. Rearranging the formula, we find V = S / I.
Plugging in the values we have, we substitute 125 kVA for S and 200 A (amperes) for I. Dividing 125 kVA by 200 A, we calculate the load voltage to be 625 V (volts). Therefore, based on the given power consumption of 100 kW at a power factor of 0.8 lagging and an ammeter reading of 200 A rms, we conclude that the load voltage is 625 volts.
Learn more about load voltage here:
https://brainly.com/question/26170633
#SPJ11
A ball has a 1.35N force applied to it. How long does it take to increase the momentum of the ball by 2.18kgm/s? O 3.53 1.615 0.83 2.945
Ball takes approximately 1.615 seconds.
How long to increase ball's momentum by 2.18 kgm/s?We have a ball on which a force of 1.35 Newtons (N) is applied. We want to determine the time it takes to increase the momentum of the ball by 2.18 kilogram-meters per second (kgm/s).
Momentum is defined as the product of an object's mass and velocity. Mathematically, it can be represented as:
Momentum = Mass * Velocity
In this case, we are given the change in momentum, which is 2.18 kgm/s. We need to find the time it takes to achieve this change in momentum.
The formula for calculating the time required to change momentum is:
Time = Change in momentum / Force
Substituting the given values into the formula:
Time = 2.18 kgm/s / 1.35 N
Now, let's perform the calculation:
Time = 1.615 seconds
Therefore, it takes approximately 1.615 seconds to increase the momentum of the ball by 2.18 kgm/s when a force of 1.35 N is applied.
Learn more about momentum
brainly.com/question/30677308
#SPJ11
what will be the potential energy utot of the system of charges when charge 2q is at a very large distance from the other charges? express your answer in terms of q , d, and appropriate constants.
The potential energy U of the system of charges when charge 2q is at a very large distance from the other charges is given by [tex]U = \frac{-3k \cdot q^2}{d}[/tex], where k is the Coulomb constant ([tex]U = \frac{-3 \times 9 \times 10^9 \cdot q^2}{d}[/tex], q is the magnitude of the charges, and d is the distance between the charges q and -2q.
The potential energy of a system of charges can be calculated using the formula:
[tex]U = \frac{k \cdot (Q_1 \cdot Q_2)}{r}[/tex]
where k is the Coulomb constant ([tex]U = \frac{9 \times 10^9 \cdot (Q_1 \cdot Q_2)}{r}[/tex]), Q1 and Q2 are the magnitudes of the charges, and r is the distance between them.
Assuming the system of charges consists of three charges q, -2q, and q, and the charge 2q is at a very large distance from the other charges, the potential energy U of the system can be calculated as follows:
[tex]U = k \left[ \frac{q \cdot (-2q)}{d} + \frac{q \cdot 2q}{\infty} + \frac{(-2q) \cdot q}{d} \right][/tex]
where d is the distance between the charges q and -2q, and ∞ represents the distance between the charge 2q and the other charges, which is assumed to be very large.
Simplifying this expression, we get:
[tex]U = \frac{-3k \cdot q^2}{d}[/tex]
Therefore, the potential energy U of the system of charges when charge 2q is at a very large distance from the other charges is given by [tex]U = \frac{-3k \cdot q^2}{d}[/tex] where k is the Coulomb constant ([tex]U = \frac{-3 \times (9 \times 10^9) \cdot q^2}{d}[/tex]), q is the magnitude of the charges, and d is the distance between the charges q and -2q.
To know more about the potential energy refer here :
https://brainly.com/question/24284560#
#SPJ11
Varignon's theorem states that the moment of a force about any point is NOT equal to the sum of moments produced by the components of the forces about the same point.
True or False?
The statement "Varignon's theorem states that the moment of a force about any point is NOT equal to the sum of moments produced by the components of the forces about the same point." is False because Varignon's theorem is a principle in mechanics that describes the relationship between a force and its components with respect to a specific point.
Varignon's theorem states that the moment of a force about any point is equal to the sum of moments produced by the components of the force about the same point. This theorem is often used in the analysis of structures and machines, and it states that the moment of a force is independent of its line of action, as long as its magnitude and direction remain constant.
To understand this theorem, we first need to define what a moment is. In mechanics, a moment is the product of a force and the perpendicular distance from a point to the line of action of the force. It is a measure of the rotational effect of the force about that point.
For more question on force click on
https://brainly.com/question/12970081
#SPJ11
False. Varignon's theorem states that the moment of a force about any point is equal to the sum of moments produced by the components of the forces about the same point. This theorem is based on the principle of moments, which states that the sum of moments of forces about any point is equal to zero when the system is in equilibrium.
When a force is resolved into its components, these components also produce moments around a point, and the sum of these moments will be equal to the moment of the original force, as per Varignon's theorem. This principle is used to analyze and solve problems involving force systems in engineering and physics.
The theorem is useful in solving problems involving forces and moments in statics and mechanics. It allows us to determine the net moment of a force system without having to calculate each individual moment separately. Understanding the theorem and its application can help in designing structures and machines that can withstand different loads and forces.
Learn more about Varignon's theorem here : brainly.com/question/30301009
#SPJ11
a truck travels due east for a distance of 1.6 km, turns around and goes due west for 9.5 km, and finally turns around again and travels 3.5 km due east.(a) What is the total distance that the truck travels? 10.9 ✓ km (b) What are the magnitude and direction of the truck's displacement? magnitude X Displacement is the change in position, that is, the difference between the initial and final position, km direction west
The truck's displacement is 4.4 km west.
Distance is the total length traveled by the truck, while displacement is the change in position from the starting point to the ending point.
The truck travels 1.6 km due east, then turns around and goes 9.5 km due west, and finally turns around again and travels 3.5 km due east.
Total distance = 1.6 km + 9.5 km + 3.5 km
Total distance = 14.6 km
tan(theta) = opposite/adjacent
tan(theta) = 3.5 km/9.5 km
theta = tan^-1(3.5/9.5)
theta = 20.1 degrees
(a) the total distance traveled by the truck, simply add all the distances covered in each segment of the trip: 1.6 km (east) + 9.5 km (west) + 3.5 km (east).
Total distance = 1.6 km + 9.5 km + 3.5 km = 14.6 km
(b)the magnitude and direction of the truck's displacement, subtract the distance covered in the opposite direction:
Net displacement (east) = 1.6 km + 3.5 km = 5.1 km
Net displacement (west) = 9.5 km
Magnitude of displacement = Net displacement (west) - Net displacement (east) = 9.5 km - 5.1 km = 4.4 km
The direction of the truck's displacement is west, as it has a net displacement in the westward direct.
To know more about displacement visit:-
https://brainly.in/question/54160270
#SPJ11
what pressure (in n/m2) is exerted on the bottom of a gas tank that is 0.621 m wide by 0.874 m long and can hold 51.7 kg of gasoline when full? (give only the pressure exerted by the gasoline.) n/m2
The pressure exerted by the gasoline on the bottom of the tank is 532.39 Pa
To determine the pressure exerted by the gasoline on the bottom of the tank, we need to know the depth of the gasoline in the tank. Assuming that the gasoline fills the tank to a depth of h meters, its volume can be calculated as follows:
Volume of gasoline = length x width x depth
V_gas = 0.874 m x 0.621 m x h
V_gas = 0.541 m^3 x h
The density of gasoline varies with temperature, but a reasonable approximation for gasoline at room temperature is 720 kg/m^3. Therefore, the mass of the gasoline in the tank can be calculated as:
Mass of gasoline = density x volume
m_gas = 720 kg/m^3 x 0.541 m^3 x h
m_gas = 390.12 h kg
We know that the tank can hold 51.7 kg of gasoline when full, so we can set up an equation:
390.12 h = 51.7 kg
Solving for h, we get:
h = 7.54 m
Now we can calculate the pressure exerted by the gasoline on the bottom of the tank using the formula:
Pressure = weight / area
The weight of the gasoline can be calculated as:
Weight of gasoline = mass x gravity
W_gas = m_gas x g
W_gas = 390.12 x 7.54 x 9.81
W_gas = 288.56 N
The area of the bottom of the tank is:
Area = length x width
A = 0.874 m x 0.621 m
A = 0.542 m^2
Therefore, the pressure exerted by the gasoline on the bottom of the tank is:
Pressure = W_gas / A
P = 504.2 N / 0.542 m^2
P = 532.39 Pa
Click the below link, to learn more about Pressure exerted by gasoline:
https://brainly.com/question/31810931
#SPJ11
Liver has a mass of 75. 0 kg. He is riding in an elevator that has a downward acceleration of 1. 80 m/s2. With what magnitude force does the elevator floor push upward on oliver?
Liver has a mass of 75.0 kg. He is riding in an elevator that has a downward acceleration of 1. 80 m/s². The magnitude of the force with which the elevator floor pushes upward on Oliver is 135.0 Newtons.
To find the magnitude of the force with which the elevator floor pushes upward on Oliver, we can use Newton's second law of motion, which states that the force (F) acting on an object is equal to the mass (m) of the object multiplied by its acceleration (a).
Given:
Mass of Oliver (m) = 75.0 kg
Acceleration of the elevator (a) = 1.80 m/s² (downward)
To find the force, we'll use the following equation:
F = m * a
Substituting the given values:
F = 75.0 kg * 1.80 m/s²
Calculating the value:
F = 135.0 N
Therefore, the magnitude of the force with which the elevator floor pushes upward on Oliver is 135.0 Newtons.
To know more about magnitude of the force here
https://brainly.com/question/29651641
#SPJ4
The current is 2amps and resistance is 30 ohms. What power does the circuit consume? a.60W b.120W c.180W d. 240W
The power consumed by the circuit is B. 120W
To calculate the power consumed by a circuit, we use the formula P = I^2R, where P is power in watts, I is current in amperes, and R is resistance in ohms.
Given that the current in the circuit is 2 amps and resistance is 30 ohms, we can plug in these values in the formula to find the power consumed.
P = I^2R
P = 2^2 x 30
P = 120 watts
Therefore, the answer is option b) 120W. This means that the circuit is consuming 120 watts of power. It is important to note that this is the power consumed by the circuit, not the power output of the circuit.
This calculation is important in determining the efficiency of a circuit. If the power consumed is higher than the power output, then the circuit is not very efficient. On the other hand, if the power output is higher than the power consumed, then the circuit is very efficient. This calculation can be used in designing and optimizing circuits for maximum efficiency. Therefore, Option B is correct.
Know more about Power here:
https://brainly.com/question/11569624
#SPJ11
state the order in which the following possible stages of a star occur: main-sequence star, planetary nebula, white dwarf, protostar, red giant.
The possible stages of a star occur in a specific order. First, a protostar is formed from a dense cloud of gas and dust. Then, as the protostar contracts and heats up, it becomes a main-sequence star and begins to generate energy through nuclear fusion. This stage can last for billions of years until the hydrogen fuel in the star's core is depleted.
At this point, the star begins to expand and becomes a red giant, which is characterized by its increased size and cooler temperature. As the red giant burns off its outer layers, it sheds material and creates a planetary nebula. This stage can last for thousands of years until the star's core collapses and becomes a white dwarf.
The white dwarf is a small and hot remnant of the star's core that no longer generates energy. It will gradually cool down over billions of years until it becomes a cold black dwarf. In summary, the order in which the possible stages of a star occur is protostar, main-sequence star, red giant, planetary nebula, white dwarf, and finally a black dwarf.
To know more about hydrogen fuel click this link-
https://brainly.com/question/29765115
#SPJ11
A 0.500 kg mass is attached to a spring and executes SHM with a velocity given by: v(t) = (3.60cm/s)sin[(4.71rad/s)t − π/2](a) What is the period?
(b) What is the amplitude?
(c) What is the maximum acceleration of the mass?
(d) What is the force constant of the spring?
(e) What is the velocity of the mass at t=0?
(f) What is the velocity of the mass at t=1.5 s?
(g) Write a function for the displacement, x(t), using the fact that at t=0 the mass is at x=0.
(h) What is the total energy of the system at t =1.5 s?
a) The time period is T = 2π/4.71 ≈ 1.34 s.b) The amplitude of SHM is A is 0.764 cm. c) The maximum acceleration is given as amax = 16.98 cm/s^2. d) The value of spring constant is k = 11.0 N/m.e) The velocity at time zero is 0.f) The velocity of the mass at t = 1.5g is 1.36. g) The displacement at the time is given as x(t) = (-3.60 cm/s)(1/4.71 rad/s)cos[(4.71 rad/s)t - π/2] + 0.765 cm. h) The total energy of the system is At t = 1.5 s, = (-3.60 cm/s)(1/4.71 rad/s)cos[(4.71 rad/s)(1.5) -
a) The period of the SHM is given by T = 2π/ω, where ω is the angular frequency. From the given velocity function, we have ω = 4.71 rad/s. Therefore, T = 2π/4.71 ≈ 1.34 s.
(b) The amplitude of the SHM is given by the maximum displacement from the equilibrium position. From the given velocity function, we see that the maximum velocity occurs when sin[(4.71rad/s)t − π/2] = 1. Therefore, vmax = (3.60 cm/s) and the amplitude is given by A = vmax/ω = (3.60 cm/s)/(4.71 rad/s) ≈ 0.764 cm.
(c) The acceleration of the mass can be obtained by differentiating the velocity function twice with respect to time. The acceleration function is given by a(t) = -(3.60 cm/s) (4.71 rad/s) cos[(4.71 rad/s)t - π/2]. At the maximum displacement from the equilibrium position, cos[(4.71 rad/s)t - π/2] = 0, so the maximum acceleration occurs at these points. Therefore, amax = (3.60 cm/s) (4.71 rad/s) = 16.98 cm/s^2.
(d) The force constant of the spring, k, can be obtained using the relation ω^2 = k/m, where m is the mass attached to the spring. From the given data, we have m = 0.500 kg and ω = 4.71 rad/s. Therefore, k = mω^2 = 0.500 kg × (4.71 rad/s)^2 ≈ 11.0 N/m.
(e) The velocity of the mass at t = 0 is given by v(0) = (3.60cm/s)sin(-π/2) = 0.
(f) The velocity of the mass at t = 1.5 s is given by v(1.5) = (3.60cm/s)sin[(4.71rad/s)(1.5) − π/2] ≈ -1.36 cm/s.
(g) The displacement function can be obtained by integrating the velocity function with respect to time. At t = 0, the displacement x(0) = 0. Therefore, we have x(t) = ∫v(t) dt = (-3.60 cm/s)(1/4.71 rad/s)cos[(4.71 rad/s)t - π/2] + C, where C is a constant of integration. Using the initial condition x(0) = 0, we have C = (3.60 cm/s)/(4.71 rad/s) = 0.765 cm. Therefore, x(t) = (-3.60 cm/s)(1/4.71 rad/s)cos[(4.71 rad/s)t - π/2] + 0.765 cm.
(h) The total energy of the system is given by the sum of the kinetic and potential energies. The kinetic energy of the mass is given by KE = (1/2)mv^2, where m is the mass and v is the velocity. The potential energy of the spring is given by PE = (1/2)kx^2, where k is the force constant and x is the displacement from the equilibrium position. At t = 1.5 s, we have x(1.5) = (-3.60 cm/s)(1/4.71 rad/s)cos[(4.71 rad/s)(1.5)a
Click the below link, to learn more about Simple Harmonic motion:
https://brainly.com/question/2195012
#SPJ11
Copper contains 8.4x 1028 free electrons/m3. A copper wire of cross-sectional area 7.4x 10-7 m2 carries a current of 1 A. The electron drift speed is approximately: A) 3x10sm/s B) 103 m/s C) Im/s D) 10-4m/s E) 10-23 m/s
The electron drift speed in a copper wire with a cross-sectional area of 7.4x10⁻⁷ m² carrying a current of 1 A is approximately 10⁻⁴ m/s.(D)
1. Use the formula for current: I = nAve, where I is the current, n is the number of free electrons per unit volume, A is the cross-sectional area, v is the drift speed, and e is the charge of an electron (1.6x10⁻¹⁹ C).
2. Substitute the given values: 1 A = (8.4x10²⁸ electrons/m³)(7.4x10⁻⁷ m²)(v)(1.6x10⁻¹⁹ C).
3. Solve for v: v = 1 A / [(8.4x10²⁸ electrons/m³)(7.4x10⁻⁷ m²)(1.6x10⁻¹⁹ C)] ≈ 10⁻⁴ m/s.(D)
To know more about electron drift speed click on below link:
https://brainly.com/question/30897630#
#SPJ11
Consider the vectorsA = −2î + 4ĵ − 5 kandB = 4î − 7ĵ + 6 k.Calculate the following quantities. (Give your answers in degrees.)(a)cos−1A · BAB°(b)sin−1|A ✕ B|AB°(c)Which give(s) the angle between the vectors? (Select all that apply.)The answer to Part (a).The answer to Part (b).
(a) cos⁻¹(A · B/|A||B|) = 119.7°
(b) sin⁻¹(|A × B|/|A||B|) = 81.2°
(c) Both Part (a) and Part (b) give angles between the vectors.
To calculate the angle between two vectors, we can use the formula cosθ = (A · B)/|A||B|, where θ is the angle between A and B.
For part (a), we plug in the values and get cos⁻¹(A · B/|A||B|) = cos⁻¹(-32/39) ≈ 119.7°.
For part (b), we use the formula sinθ = |A × B|/|A||B|, where × denotes the cross product. We get |A × B| = |-62i - 34j - 6k| = √(-62)² + (-34)² + (-6)² = √4840, and plug in the values to get sin⁻¹(|A × B|/|A||B|) = sin⁻¹(√4840/39) ≈ 81.2°.
Both parts (a) and (b) give angles between the vectors, so the correct answer for part (c) is both Part (a) and Part (b).
To learn more about angle between vectors, here
https://brainly.com/question/28529274
#SPJ4
The complete question is:
Consider the vectors
A = −2î + 4ĵ − 5 k
and
B = 4î − 7ĵ + 6 k.
Calculate the following quantities. (Give your answers in degrees.)
(a)
cos−1
A · B
AB°
(b)
sin−1
|A ✕ B|
AB°
(c) Which give(s) the angle between the vectors? (Select all that apply.)
The answer to Part (a).
The answer to Part (b).
19. a gas releases 200j of energy, while doing 100j of work. what is the change in internal energy?
The change in internal energy of the system has decreased by 300 J.
The change in internal energy is given by the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system. Mathematically,
ΔU = Q - W
where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.
In this case, the gas releases 200 J of energy, which is equivalent to 200 J of heat being removed from the system. The gas also does 100 J of work. Therefore, the change in internal energy is:
ΔU = Q - W
ΔU = -200 J - 100 J
ΔU = -300 J
The negative sign indicates that the internal energy of the system has decreased by 300 J.
Learn more about internal energy here:
https://brainly.com/question/14668303
#SPJ11
Two converging lenses with focal lengths f1=20 cm and f2=25 cm are placed 80 cm apart. An object is place 60 cm in front of the first lens. Determine a) the position and b) the magnification of the final image formed by the combination of the two lenses.
The final image position is 50 cm behind the second lens and the magnification of the final image formed by the combination of the two lenses is -0.5.
a) To determine the position of the final image, we'll use the lens formula: 1/f = 1/v - 1/u. For the first lens (f1=20 cm), u1=-60 cm. Applying the formula:
1/20 = 1/v1 - 1/(-60)
v1 = -30 cm
Now, we find the position of the object for the second lens. Since the lenses are 80 cm apart and v1=-30 cm, u2 = 80 - 30 = 50 cm. For the second lens (f2=25 cm), applying the lens formula:
1/25 = 1/v2 - 1/50
v2 = 50 cm
The final image position is 50 cm behind the second lens.
b) To determine the magnification, we'll find the magnification of each lens and then multiply them. For the first lens:
m1 = -v1/u1 = 30/60 = 0.5
For the second lens:
m2 = -v2/u2 = -50/50 = -1
The overall magnification is the product of the individual magnifications:
m = m1 * m2 = 0.5 * (-1) = -0.5
The final image has a magnification of -0.5, meaning it is reduced in size by 50% and inverted.
To know more about magnification visit:
brainly.com/question/31595015
#SPJ11
You push with a steady force of 18 N on a 44-kgdesk fitted with casters (wheels that swivel) on its four feet.
A.) How long does it take you to move the desk 5.1 m across a warehouse floor?
It takes approximately 4.99 seconds to move the desk 5.1 meters across the warehouse floor.
It takes you 2.5 seconds to move the desk 5.1 m across the warehouse floor with a steady force of 18 N.
To answer your question, we will first need to calculate the acceleration of the desk, then use that to find the time it takes to move 5.1 meters.
1. Calculate the acceleration (a) using Newton's second law of motion:
F = m * a
where F is the force applied (18 N), m is the mass of the desk (44 kg), and a is the acceleration.
a = F / m = 18 N / 44 kg = 0.4091 m/s²
2. Use the equation of motion to find the time (t) it takes to move the desk 5.1 meters:
s = ut + 0.5 * a * t²
where s is the distance (5.1 m), u is the initial velocity (0 m/s since the desk starts from rest), a is the acceleration (0.4091 m/s²), and t is the time.
5.1 m = 0 * t + 0.5 * 0.4091 m/s² * t²
Solving for t, we get:
t² = (5.1 m) / (0.5 * 0.4091 m/s²) = 24.9 s²
t = √24.9 ≈ 4.99 s
To know more about seconds visit :-
https://brainly.com/question/30217363
#SPJ11
A fan is rotating with an angular velocity of +17 rad/s. You turn off the power and it slows to a stop while rotating through angle of +7.2 rad.
(a) Determine its angular acceleration in rad/s2
(b) How long does it take to stop rotating?
(a) The angular acceleration of the fan can be calculated using the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
Since the final angular velocity is zero, the angular acceleration is simply the initial angular velocity divided by the time taken to stop. Therefore, the angular acceleration of the fan is:
angular acceleration = initial angular velocity / time = 17 rad/s / t
(b) To find the time it takes for the fan to stop rotating, we can use the formula:
final angular velocity = initial angular velocity + (angular acceleration x time)
Since the final angular velocity is zero and the initial angular velocity is +17 rad/s, and we already know the angular acceleration from part (a), we can rearrange this formula to solve for time:
time = initial angular velocity / angular acceleration = 17 rad/s / (angular acceleration)
Therefore, to determine how long it takes for the fan to stop rotating, we need to first calculate the angular acceleration from part (a), and then plug it into the formula above to solve for time.
Learn more about velocity here:
https://brainly.com/question/17127206
#SPJ11
A cup of coffee is poured, and the temperature is measured to be 120 degrees Fahrenheit. The temperature of the coffee then decreases at a rate modeled by r(t) = 55e 0.03e degrees Fahrenheit per minute, where t is the number of minutes since the coffee was poured. What is the temperature of the coffee, in degrees Fahrenheit, at time t = 1 minute? A 53.4°F B 54.5 F с 65.5°F D 66.6°F
The temperature of the coffee at t = 1 minute is approximately 54.5°F (Option B).
To find the temperature of the coffee at t = 1 minute, we need to integrate the rate function r(t) = 55e^(0.03t) with respect to time and then add the initial temperature of 120°F.
First, let's integrate r(t):
∫(55e^(0.03t) dt) = (55/0.03)e^(0.03t) + C
Now, we need to find the constant C. Since the initial temperature is 120°F at t = 0:
120 = (55/0.03)e^(0.03*0) + C
C = 120 - (55/0.03)
Now, let's find the temperature at t = 1 minute:
T(1) = (55/0.03)e^(0.03*1) + (120 - (55/0.03))
T(1) ≈ 54.5°F
So, the temperature of the coffee at t = 1 minute is approximately 54.5°F (Option B).
To learn more about temperature visit:https://brainly.com/question/26866637
#SPJ11
Two non-zero vectors A and B both lie in the xy-plane. The only thing that you know about these vectors is that vector sum A + B is in the -y direction (exactly parallel to the negative y direction). What can you say for certain about the components of these vectors? (Hint: draw a vector diagram) a. Ax = By b. Ay=-By c. Ay=By Ax= - Bx Ax = BX
Okay, let's think this through with a vector diagram:
Since A + B points in the -y direction, we know:
A + B = [-0, A_y + B_y, 0] (points down the -y axis)
But we don't know the exact magnitudes of A and B. We only know they lie in the xy-plane.
Some possibilities we can rule out:
a. Ax = By - We can't say that for sure. The x-components could be unequal.
b. Ay=-By - We can't say that either. The y-components could have the same sign.
c. Ay=By - This is possible, but we don't have enough info to say it's certain.
The only thing we can conclude with certainty is:
d. Ax = BX - Because the vectors lie in the xy-plane, their x-components must be equal.
If the x-components were unequal, the vector sum wouldn't end up pointing exactly down the -y axis.
So the correct choice is d:
Ax = BX
We can't say anything definitive about the y-components, only that they must sum to give a vector pointing down the -y axis.
Does this make sense? Let me know if you have any other questions!
we can say for certain that Ay = -By and Ax = -Bx. Hence, the correct option is (d) Ay = -By and Ax = -Bx.
Given that A and B lie in the xy-plane, we can write them as A = (Ax, Ay, 0) and B = (Bx, By, 0), where Ax, Ay, Bx, and By are the x, y components of vectors A and B respectively. Now, we know that the vector sum of A and B is in the -y direction, which means that the z-component of A + B is zero and the y-component is negative. So, we can write:
A + B = (Ax + Bx, Ay + By, 0) = (0, -k, 0)
where k is some positive scalar.
This implies that Ax + Bx = 0 and Ay + By = -k. Therefore, we can say for certain that Ay = -By and Ax = -Bx. Hence, the correct option is (d) Ay = -By and Ax = -Bx.
We can visualize this using a vector diagram where A and B are represented as arrows in the xy-plane, and their vector sum A + B is represented as an arrow in the negative y direction. This diagram will show that A and B are pointing in opposite directions in the x and y axes.
To know more about vectors visit:
brainly.com/question/29740341
#SPJ11
air has a density of ~ 1 kg/m3. estimate the mass of earth’s atmosphere (in kg).
The estimated mass of Earth's atmosphere is approximately 5.15 x 10^18 kg. This estimation is based on the density of air and the Earth's surface area.
To estimate the mass of Earth's atmosphere, we need to consider both the density of air and the total volume of the atmosphere. The density of air is approximately 1 kg/m^3, as stated in the question. The Earth's atmosphere is not uniform in density, but we can use this value as an approximation.
To determine the volume of Earth's atmosphere, we can consider the Earth as a sphere with a radius of 6,371 km. We also need to estimate the height of the atmosphere, which is approximately 100 km. This gives us a larger sphere with a radius of 6,471 km. Subtracting the volume of the smaller sphere (Earth) from the volume of the larger sphere (Earth plus atmosphere) gives us the volume of the atmosphere.
Now, we can use the formula for the volume of a sphere (4/3πr^3) to find the volumes of both spheres. Subtracting the volume of Earth from the volume of the larger sphere gives us approximately 1 x 10^21 m^3 as the volume of Earth's atmosphere.
Finally, we can multiply the volume of the atmosphere (1 x 10^21 m^3) by the density of air (1 kg/m^3) to estimate the mass of Earth's atmosphere. This gives us an estimated mass of 5.15 x 10^18 kg.
To know more about Earth's atmosphere, click here;
https://brainly.com/question/13154099
#SPJ11
A ball has a mass of 1. 2 kg and is raised to a height of 2 m. How much potential gravitational energy does it have?
A ball has a mass of 1. 2 kg and is raised to a height of 2 m. The ball has potential gravitational energy of approximately 23.52 Joules.
The potential gravitational energy of an object is given by the equation:
[tex]PE = m * g * h[/tex]
where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity, and h is the height.
The work done by gravitational force on the body is equal to the change in gravitational potential energy.
Work is equal to force times displacement. Since the mass is the same in both situations, the g and h constants are likewise the same in both situations. In all scenarios, the gravitational energy change will be the same. Initial velocity has no bearing at all on the outcome in the kinetic energy.
Plugging in the given values, we have:
PE = 1.2 kg * 9.8 m/s² * 2 m = 23.52 J
Therefore, the ball has potential gravitational energy of approximately 23.52 Joules when it is raised to a height of 2 meters.
Learn more about kinetic energy here
https://brainly.com/question/30591597
#SPJ11
the motion of a block on a spring is described by the equation x = (0.01 m)cos[(100 rad s−1)t] where t is the time. if the block has a mass of 0.25 kg, what is the total energy of its oscillation?
The answer is 0.125 J.
The equation for the total energy of an oscillator is:
E = (1/2)kA^2
where k is the spring constant and A is the amplitude of oscillation.
In the given equation, the displacement of the block on the spring is given by:
x = Acos(ωt)
where A is the amplitude, ω is the angular frequency, and t is the time.
Comparing this with the given equation, we get:
A = 0.01 m
ω = 100 rad/s
The spring constant, k, is given by:
k = mω^2
where m is the mass of the block.
Substituting the given values, we get:
k = (0.25 kg)(100 rad/s)^2 = 2500 N/m
The total energy of the oscillation is:
E = (1/2)kA^2 = (1/2)(2500 N/m)(0.01 m)^2 = 0.125 J
Therefore, the total energy of the oscillation is 0.125 J.
To know more about the total energy of an oscillator, refer here
https://brainly.com/question/31081918#
#SPJ11
a certain engine extracts 1300 j of heat from a hot temperature reservoir and discharges 1131 j of heat to a cold temperature reservoir. what is the efficiency of this engine?
The efficiency of the engine in this scenario is 13%.
The efficiency of the engine can be calculated using the formula: Efficiency = (Work output/Heat input) x 100%. In this case, since the engine is extracting heat from a hot temperature reservoir and discharging heat to a cold temperature reservoir, we can assume that the work output is equal to the difference in heat extracted and discharged. Thus, the work output can be calculated as follows: Work output = Heat extracted - Heat discharged.
Using the given values, the work output can be calculated as: Work output = 1300 J - 1131 J = 169 J.
The heat input in this case is simply the heat extracted from the hot temperature reservoir, which is 1300 J.
Therefore, the efficiency of the engine can be calculated as follows: Efficiency = (Work output/Heat input) x 100% = (169 J/1300 J) x 100% = 13%.
Learn more about engine here:-
https://brainly.com/question/27810737
#SPJ11
(7%) Problem 8: Consider a conducting rod of length 32 cm moving along a pair of rails, and a magnetic field pointing perpen Lynch, Michael Smit - małynchroemion du the pic20-9027590, dance with pet TAY Thief Servicelog this information to any solutions whis Domayin of you let TA A & At what speed (in m/s) must the sliding rod move to produce an emf of 0.85 V in a 1.55 T field? Grade Summary Deductions 03 Potential 1005 sin) cos tan al 7 89 Submissions cotan asino acos 4 5 16 Attempts remaining per attempo atan acotan sinh 1 2 3 detailed view cosho tanh cotanho + - 0 Degrees Radians VO Submit Hint I give up! Hints: 0 deduction per hint. Hints remaining 4 Feedback: 0. deduction per feedback.
To produce an emf of 0.85 V in a 1.55 T magnetic field, the conducting rod of length 32 cm must move at a speed of 8.44 m/s.
This can be calculated using the formula for emf induced in a conductor moving through a magnetic field, which is given by E = B*L*v, where E is the emf, B is the magnetic field, L is the length of the conductor, and v is the velocity of the conductor. Solving for v, we get v = E/(B*L) = 0.85/(1.55*0.32) = 8.44 m/s.
Therefore, the conducting rod must move at a speed of 8.44 m/s to produce an emf of 0.85 V in a 1.55 T magnetic field.
Learn more about speed here :
https://brainly.com/question/28224010
#SPJ11
barium has a work function of 2.48 ev. what is the maximum kinetic energy of electrons if the metal is illuminated by light of wavelength 400 nm?
The maximum kinetic energy of the electrons when barium is illuminated by light with a wavelength of 400 nm is approximately 0.622 × 10^(-15) eV.
To calculate the maximum kinetic energy of electrons when barium is illuminated by light of a certain wavelength, we can use the photoelectric effect equation:
E = hf - Φ
Where:
E is the maximum kinetic energy of electrons,
h is Planck's constant (approximately 4.136 × 10^(-15) eV·s),
f is the frequency of the light (related to wavelength by the equation f = c/λ, where c is the speed of light),
Φ is the work function of the metal (given as 2.48 eV).
To solve the problem, we first need to convert the given wavelength of 400 nm to frequency:
λ = 400 nm = 400 × 10^(-9) m
c = speed of light = 3 × 10^8 m/s
f = c/λ = (3 × 10^8 m/s) / (400 × 10^(-9) m) = 7.5 × 10^14 Hz
Now, we can substitute the values into the photoelectric effect equation:
E = hf - Φ
E = (4.136 × 10^(-15) eV·s) × (7.5 × 10^14 Hz) - 2.48 eV
Calculating this equation gives us:
E ≈ (3.102 × 10^(-15) eV) - 2.48 eV
Simplifying further:
E ≈ 0.622 × 10^(-15) eV
To know more about kinetic energy, please click on:
https://brainly.com/question/22174271
#SPJ11