AThe half-life of an isotope is the amount of time it takes for half of the atoms in a sample to decay. If the half-life of a sample of uranium-234 is 2.5 * 10^5 years, it means that after 2.5 * 10^5 years, half of the atoms in the sample will have decayed.
If you want to know how long it will take for only one sixth of the original mass to be left, you can use the following formula:
t = (half-life) * log(2) / log(1/6)
Plugging in the values, we get:
t = (2.5 * 10^5 years) * log(2) / log(1/6)
This simplifies to:
t = 3.7 * 10^5 years
So it will take approximately 3.7 * 10^5 years for only one sixth of the original mass to be left.nswer:
Question 4
3 pts
Which if the following elements will not reach an octet when in a bond?
Calcium
O Lithium
Magnesium
O Carbon
Ouestion 5
Lithium has a valence of 1, so it will not usually reach an octet in a bond. It tends to form ionic bonds, in which there is only one electron transfer, rather than two or more which would be required to reach an octet.
What is Lithium?Lithium is a soft, silver-white metal that is the lightest of all alkali metals. It is a key component in many batteries, and is also used in a variety of other applications. It has a low reactivity, and is relatively stable when exposed to air and water. In its elemental form, Lithium is a highly flammable, corrosive metal that is rarely found in its pure form in nature. It can be found in minerals such as lepidolite and spodumene, and is commonly mined from salt flats and brine pools.
To learn more about Lithium
https://brainly.com/question/15178590
#SPJ4
In the molecules below, areas that have a partial negative charge are pink and areas that have a partial positive charge are blue.
The attractive force between these two molecules has most likely been produced by
covalent bonds.
dipole-dipole interactions.
dipole-induced dipole interactions.
London dispersion forces.
The attractive force (intermolecular force) between these two molecules has most likely been produced by dipole-dipole interactions.
The correct option is B.
What are intermolecular forces?Intermolecular forces are forces of attraction or repulsion that act between atoms and other kinds of nearby particles, such as atoms or ions, to mediate interactions between molecules.
Some intermolecular forces are:
covalent bonds.dipole-dipole interactions.dipole-induced dipole interactions.London dispersion forces.Considering the given molecules in the diagram:
Each molecule is made up of two distinct components, and as a result, each molecule has a constant bond dipole.
The attractive forces are dipole-dipole attractions because the dipoles do not cancel. The dipole-dipole attractions are substantially stronger than the dipole-induced dipole and London dispersion forces.
Learn more about dipole-dipole attractions at: https://brainly.com/question/29212710
#SPJ1
0.23 g of a sample of common salt contained 0.1518 g of chlorine .show that these results are in agreement with the law of constant proportion
To solve this we must be knowing each and every concept related to Law of constant proportion. Therefore, the results are in agreement with the law of constant proportion.
What is Law of constant proportion?Chemical compounds are composed of components that are present in a set ratio by mass, according to the Law of Constant Proportion. The Proust law or Law of Definite Proportions is another name for the Law of Constant Proportion. NaCl will continue to have a 1:1 mass ratio.
mass of NaCl = mass of Cl + mass of Na
0.25 g= 0.1518 gm+ mass of Na
mass of Na = 0.0982 gm.
ratio of 1st sample= mass of Cl /mass of Na
= 0.1518 gm/ 0.0982
=1.54
In the second sample, NaCl weighs 0.24 g, Cl weighs 0.1458 g and Na weighs 0.0942 g.
ratio of 2nd sample is = 0.1458 g/0.0942 g.
=1.54
Therefore, the results are in agreement with the law of constant proportion.
To learn more about Therefore, the results are in agreement with the law of constant proportion., here:
https://brainly.com/question/20696665
#SPJ1
In the last minute rush to assemble the demonstration, your teacher spills the lead chloride all over their sandwich and is left with 57.2 grams in the bottle. How much potassium iodide should be weighed out to convert all of the lead chloride to product?
Answer: Magnesium is being oxidized, and the chloride ion is being reduced. ... solutions of the reactants lead(II) nitrate and potassium iodide.
Explanation:
Explain the relationship between an element's row number in the periodic table and the highest principal quantum number in the element's electron configuration. How does this relationship differ for main-group elements, transition elements, and inner transition elements
The row number in the periodic table corresponds to the highest principal quantum number (n) in the element's electron configuration, also known as the element's valence shell.
Difference between relationship of main-group elements, transition elements, and inner transition elements.For main-group elements, the highest principal quantum number increases from n = 2 in the first row to n = 3 in the second row and n = 4 in the third row. This means that main-group elements in the first row have their valence electrons in the 2nd energy level (n=2), elements in the second row have their valence electrons in the 3rd energy level (n=3) and elements in the third row have their valence electrons in the 4th energy level (n=4).
Transition elements have electron configurations that deviate from this pattern, they have electrons in higher energy level (n>3) but these electrons are not in the valence shell. They have a different valence electron configuration which allows them to exhibit multiple oxidation states, and also they have a d-block in their electron configuration
Inner transition elements also deviate from this pattern, they also have electrons in higher energy level (n>3) but these electrons are not in the valence shell. They have a different valence electron configuration which allows them to exhibit multiple oxidation states, and also they have a f-block in their electron configuration.
To know more about valence electron visit: https://brainly.com/question/2725863
#SPJ4
naproxen (Aleve): 73.03%C, 6.13%H, and 20.84%O Express your answer as a chemical formula?
If the molecular weight is 230.26 g/mol carbon = 73.03% = 230.26*73.03/100 = 168.15/12 = 14 Carbons Hydrogen = 6.13% = 230.26*6.13/100 = 14/1 = 14 Hydrogens Oxigen = 20.84% = 230.26*20.84/100 = 47.98/16 = 3 Oxygens Hence the empirical formula is C14H14O3
What is a weight example?The International System for Units (SI) defines the newton as the unit of force, which is used to measure weight. For instance, a kilogram of matter weighs around 9.8 newtons on Earth's surface and around each as much on Moon.
How are weights determined?Weight, which is expressed in newtons, is a unit of measurement for the gravitational force acting on an object. The mass of a bird with a mass of 15 g changes with the strength of the gravity influence acting on it, and would differ significantly if it were measured, for instance, on the Moon rather than on Earth.
To know more about weight visit:
https://brainly.com/question/6853752
#SPJ4
2. How many moles of helium are present in a balloon at STP if the volume is 3.7 L? Please show all work!
Using the Ideal Gas Law equation: [tex]PV=nRT[/tex]
P = pressure (kPa)V = volume (L)n = moles (mol)R = gas constant( [tex]\frac{kPaL}{molK}[/tex])T = Temperature (K)STP also known as Standard Temperature and Pressure is a set of conditions at sea level
At STP:
P = 101.3 kPa
T = [tex]0^o C[/tex] or 273 K
[tex]n=\frac{PV}{RT}[/tex]
[tex]n=\frac{101.3kPa)(3.7L)}{(8.31\frac{kPaL}{molK})(273K)}[/tex]
[tex]n = 0.16 mol[/tex]
Is irony the expected outcome?
In literary classes, the three most popular types are verbal irony, dramatic irony, and situational irony. When a speaker or narrator says something that contradicts what they mean, what they intend, or what the context necessitates, this is called verbal irony.
What is irony?One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.
Here,
The three most common varieties in literary studies are verbal irony, dramatic irony, and situational irony. Verbal irony occurs when a speaker or narrator says something that contradicts what they mean, what they intend, or what the context requires.
To know more about irony,
brainly.com/question/1695719
#SPJ4
The extended structure of sodium chloride (NaCl) is shown.
Which of the following describes the configuration of Layer 4 of the sodium chloride crystal?
OPTIONS
A
It will be identical in all of its characteristics to Layer 1.
B
It will contain 4 atoms of chlorine and 5 atoms of sodium.
C
It will have chlorine atoms in all four of its corners.
D
It will have sodium that are bonded only to other sodium atoms.
Sodium chloride crystal will contain 4 atoms of chlorine and 5 atoms of sodium. Therefore, option B is correct.
What is sodium chloride?In sodium chloride, each ion is usually surrounded by 6 ions of the opposite charge. The surrounding ions are positioned at the vertices of a regular octahedron.
In the language of close-packing, the larger chloride ions are arranged in a cubic array whereas the smaller sodium ions fill all the cubic gaps between them.
The basic structure is commonly known as the halite or rock-salt crystal structure. It can be represented as a face-centered cubic lattice with a two-atom basis or as two face centered cubic lattices. The one atom is located at lattice point, and the second atom is located halfway between lattice points along edge of the fcc unit cell.
Learn more about Sodium chloride, here:
https://brainly.com/question/6649122
#SPJ1
Which type (or types) of crystalline solid is characterized by each of the following: (a) high mobility of electrons throughout the solid; (b) softness, relatively low melting point; (c) high melting point and poor electrical conductivity; (d) network of covalent bonds?
Types of crystalline solids characterized by;
(a) high mobility of electrons throughout the solid; metallic solids.
(b) softness, relatively low melting point; covalent network solid.
(c) high melting point and poor electrical conductivity; ionic solids.
(d) network of covalent bonds; molecular solids.
What are the types of crystalline solids?Crystalline solids are those that have their atoms, ions, or molecules arranged in a regular, well-defined pattern. The unit cell is the smallest repeating pattern of crystalline solids, and unit cells are similar to bricks in a wall in that they are all identical and repeating.
Ionic solids, molecular solids, network covalent solids, and metallic solids are the four types of crystalline solids. A covalent network solid is a type of solid that has a low melting point, softness, and low electrical conduction. Metal cations are surrounded by a "sea" of mobile valence electrons in metallic crystals.
Learn more on crystalline solids here: https://brainly.com/question/12759602
#SPJ1
I need help plssss:(
the question is in the photo
Normal text Calibri
25) Look at the way the contour lines point or bend on the topographic map below. Match the blanks on
the map below using the terms "Upstream" or "Downstream" based on the direction the stream is
flowing.
Zo
1?
2.?
In the given bend on the topographic map, 1. is Downstream and 2. is Upstream.
What is Upstream and Downstream of the river?The stream can be described as the moving water in a river is called a stream. Upstream can be described as if the water is flowing in the opposite direction to the stream, it is known as upstream.
Downstream can be described as flowing along the direction of the stream, it is known as downstream.
Still water can be described as under this circumstance the water is stationary and the speed of the water is equal to zero.
All rivers flow downhill from higher elevations to lower elevations and perpendicular to the contour line. As a rule of thumb, the V-shaped contour is representing upstream.
Learn more about Upstream and Downstream, here:
https://brainly.com/question/11194433
#SPJ1
A 1. 0108 g sample of an unknown nonelectrolyte is dissolved in 10. 0090 g of benzophenone and produces a solution that freezes at 35. 8 C. If the pure benzophenone melted at 48. 1 C, what is the molecular weight of the unknown compound?
The molecular weight of the unknown compound is 80.864g.
Give a definition of freezing point depression.Only the solute's concentration affects freezing point depression; the solute's mass or chemical composition have no bearing. When it's cold outside, salt is often used to prevent ice from forming on roads by lowering the freezing point of water.
Depression in freezing point is Kb x m
T(f) - T = Kb x m
48.1 - 35.8 = 9.8 x m
m = 1.255
m = moles of solute x 1000/mass of solvent
moles of solute x 1000 / 10.0090 = 1.255
moles of solute = 0.0125
moles = mass / molar mass
1.0108 / molar mass = 0.0125
molar mass = 1.0108 / 0.0125
molar mass = 80.864
so the molecular weight is 80.864g.
To know more about freezing point visit:
https://brainly.com/question/1550397
#SPJ4
Which of the following properties of covalent compounds are influenced by ionic character?
a. melting point
b. boiling point
c. viscosity
d. all of the above
The property of the covalent compound that is influenced by ionic character is boiling point. Option B
What is the ionic character?We know that for compounds, the kind of bonds that they have are usually neither here nor there. The bonds would have an ionic character and also a given amount of the covalent character.
We must note that the ionic character of a bond is very important when we discuss intermolecular interactions and they do affect the boiling points of the substances very much.
Learn more about boiling point:https://brainly.com/question/2153588
#SPJ1
what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
Dimensional evaluation makes use of conversion elements to use the unit in an quantity into an equal amount expressed with a exclusive unit.
For example, a conversion aspect might be used to transform meters to centimeters. Dimensional evaluation (additionally referred to as aspect label approach or unit evaluation) is used to transform from one set of gadgets to another. This approach is used for each simple (ft to inches) and complex (g/cm3 to kg/gallon) conversions and makes use of relationships or conversion elements among exclusive units of gadgets. A conversion ratio (or unit aspect) is a ratio same to one. This ratio includes the names of the gadgets for use withinside the conversion. It may be used for conversions in the English and Metric Systems, in addition to for conversions among the systems. The conversion unit is primarily based totally upon the idea of equal values.
To learn more about conversion unit check the link below:
https://brainly.com/question/28036423
#SPJ4
What do the small lines marked on the Meterstick represent?
The small lines marked on the Meterstick represents the measurement you make can be certain to the centimeter.
Centimeter is the metric unit of the measurement which is used for measuring the length of an object.
Meterstick is the measuring stick one meter long that is marked off in centimeters and usually millimeters. A meterstick is divided into 100 cm. The smallest lines on the meterstick are the centimeters which means that each measurement you make can be certain to the centimeter. It is used to measure the things in meters and centimeters. For example: Length of a table or the width of a bag can be measured by using a meterstick.
To know more about length here
https://brainly.com/question/30100801
#SPJ4
In the lab, the dominant phenotype for sheep color is wool and the recessive phenotype for sheep color is wool
The dominant phenotype for sheep color is wool because it is the most common color seen in sheep.
What do you mean by Phenotype?
Phenotype is the physical, biochemical, and physiological characteristics of an organism, as determined by both genetic makeup and environmental influences. It is the physical expression of an organism's genes, and can be seen in its morphology, development, and behavior.
Wool is usually white or off-white in color and is the result of a dominant gene. The recessive phenotype for sheep color is non-wool, which is usually a darker color, such as black, brown, or gray. This is the result of a recessive gene and is less common than the dominant gene.
To know more about Phenotype,
https://brainly.com/question/902712
#SPJ4
Which element doe not form a table ion with the ame electronic configuration a neon?
A Magneium B Fluorine C Sodium D Chlorine
Sodium does not form a stable ion with the same electronic configuration as neon.
Electronic configuration of an element describes that how the electrons are distributed in its atomic orbitals. Electronic configuration of an atoms follows a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold written in superscript) are placed in a sequence.
Sodium (Na) ion has the same electronic configuration as that of neon. Both are the isoelectronic species with 10 electrons and the electronic configuration is 1s22s22p6.
Sodium has electronic configuration is 1s22s22p63s1. It loses one electron to give Na+ ion with the electronic configuration of neon (Ne).
To know more about element here
https://brainly.com/question/13794764
#SPJ4
What is the name of an isotope that has 14 protons and 14 neutrons?
The name of an isotope that has 14 protons and 14 neutrons is Silicon-28
The total number of protons and neutrons in an isotope's nucleus is referred to as the mass number. This is due to the fact that each proton and neutron has a mass of one atomic mass unit.
We may get the mass of the atom by multiplying the total number of protons and neutrons by 1 amu.
The atomic number Z is 14 if there are 14 protons. Z being the quantity of large positively charged nuclear particles by definition.
Silicon is what we have if Z is the atom's identity and Z=14. The isotope of the element is 28S because the element may contain more or fewer neutrons than Z, where neutrons are heavy, neutrally charged nuclear particles.
Silicon-28 is the isotope with 14 protons and 14 neutrons.
Learn more about neutron at brainly.com/question/29248303
#SPJ4
What is the molecular formula of a compound whose empirical formula is CH4 and has a molar mass is 32. 086 g/mole?
The molecular formula of a compound whose empirical formula is CH4 and has a molar mass is 32. 086 g/mole is C
The molecular formula of a compound is the actual number and types of atoms that make up a molecule. It gives the exact number of atoms of each element in a molecule.
On the other hand, the empirical formula of a compound represents the simplest whole number ratio of atoms that make up a compound. It gives the lowest whole number ratio of atoms of each element in a molecule.
Multiply the subscripts in the empirical formula by a factor needed to reach the molar mass of the compound. In this case, CH4 has a molar mass of 16.04 g/mol and the compound has a molar mass of 32.086 g/mol.
32.086 g/mol/16.04 = 2
Multiplying the subscripts by 2, the molecular formula of the compound is C2H8.
Learn more about molecular formula here: https://brainly.com/question/20146794
#SPJ4
The boiling point of acetone is 50.5°C, while the boiling point of water is 100°C. Bringing a solution made of water and acetone to which of the following temperatures would allow the separation of these two liquids?
The temperature must be greater than 50.5°C and less than 100°C.
What is temperature ?
Temperature is a physical property that is used to measure the average kinetic energy of particles in a system, such as a gas, liquid, or solid. It is measured in units of degrees on the Celsius, Fahrenheit, or Kelvin scales.
Temperature is related to the average kinetic energy of particles in the system, and is affected by the number of particles, their mass, and the strength of their interactions.
Which temperature range is typical?
Core temperature is 98.6 F on average (37 C). However, the average body temperature might be anywhere from 97 F (36.1 C) to 99 F (37.2 C) or higher. Depending on the period of year or how busy you are, your body temperature may change. In general, elderly people's temperature are lower than those of younger people.
To learn about more temperature.
brainly.com/question/25677592
#SPJ1
A binary covalent bond exists between
A. Any element
B. 2 nonmetals
C. 1met and 1 nonmetal
D. 2 metals
A binary covalent bond exists between 2 nonmetals.
These compounds are termed similarly to binary ionic compounds even though they don't contain ions.
These guidelines apply to the nomenclature of binary covalent compounds:
The complete name of the first element in the formula is given first.
The name of the second element refers to it as an anion.
Prefixes are employed to indicate the number of atoms in a compound. The prefix mono- is dropped if the first element only has one atom.
For instance, carbon monoxide is the name given to CO rather than monocarbon monoxide.
To look more about covalent bond click here
brainly.com/question/10777799
#SPJ4
Among the following radioactive parent isotopes, which has the shortest half-life?A) uranium-238B) potassium-40C) rubidium-87D) carbon-14
The half-life of a radioactive isotope is the time it takes for half of the original number of atoms in a sample to decay.
The isotope with the shortest half-life among the given options is:
D) carbon-14
The half-life of carbon-14 is 5,730 years which is shorter than the other isotopes. Uranium-238 has a half-life of 4.5 billion years, potassium-40 has a half-life of 1.25 billion years and rubidium-87 has a half-life of 49.8 billion years, all are greater than the half-life of carbon-14.
So, carbon-14 is the isotope with the shortest half-life among the given options.
It is important to note that the half-life of an isotope is a constant property of the isotope. For example, the half-life of carbon-14 is always 5,730 years and does not change with the amount of carbon-14 present or any other factors.
Learn more about Half-life reactions here: https://brainly.com/question/29604077
#SPJ4
Which of the following would be a reasonable unit for the rate constant of a second order reaction?
1. mol/L.sec
2. mol2/sec.L2
3. 1/sec
4. L/mol.sec
5. L2/mol2.sec
Option (4) is correct. The rate constant of a second order reaction has the unit L/mole. sec.
In the Second order reaction the rate is proportional to the square of the concentration of one reactant. Rate of Second order reaction is proportional to the product of the concentrations of two reactants. Such reactions generally have the form,
A + B → products.
Each monomer combines to form a larger molecule is called dimer. For the units of the reaction rate to be moles per liter per second (M/s), the units of a second-order rate constant must be the inverse (M−1·s−1). Because the units of molarity are expressed as mole/L, the unit of the rate constant can also be written as L(mole ·s).
To learn more about Second order reaction please visit:
https://brainly.com/question/17586293
#SPJ4
A second row element has a large jump between its third and fourth ionization energies. What is the element
Be is the second element with two valence elements When a core electron is eliminated, the energy of ionization increases. From an element's electrical configuration, it is simple to see a significant change in ionization energy.
Electronically, beryllium is configured as 1s2 2s2. The outermost shell of beryllium has two valence electrons, hence the data on ionization energy will show a sharp rise or leap from the second to the third ionization energy due to the elimination of a core electron. Nitrogen has the following electrical configuration: 1s2 2s2 2p3. The outermost shell of nitrogen has five valence electrons, thus when one of them is removed, the ionization energy data for nitrogen will show a sharp rise or leap from the fifth to sixth ionization energy.
To learn more about ionization energy please click on below link
https://brainly.com/question/28385102
#SPJ4
Frida wants to measure the volume of a stone. She starts by pouring 473 mL of water into a large measuring cup. Then she drops in the stone. Now the water measures 499 mL. What is the volume of the stone
Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. the volume of the stone is 26 cm³.
Frida wants to find the volume of a stone by measuring the change in water volume before and after the stone is added. She fills a measuring cup with 473 mL of water and drops the stone in, causing the water level to rise to 499 mL. Using the conversion factor that 1 mL = 1 cm³, the initial volume of water is 473 cm³ and the final volume of water is 499 cm³. By applying the equation [Volume of stone] + [Initial water volume] = [Final water volume],
substituting the values
⇒ xcm3 +473cm3 = 499cm3
xcm3 =499cm3 −473cm3
xcm3 =26cm cube
the volume of the stone can be determined to be 26 cm³.
Learn more about conversion factor here:
https://brainly.com/question/28366871
#SPJ4
What information does the percent composition of an atom in
a molecule give?
The relative number of atoms one element
contributes to a molecule
B. The total number of atoms of that element in a molecule
• C. The total mass that element contributes to a molecule a
O
D. The relative amount of mass an atom contributes to
a molecule
Answer:
I think Option no D is the suitable answer
15) Lidocaine 2 gm/500 mL D5W is ordered to run at 3.5 mg/min. At what rate should the IV pump be set
Ordered to run at 3.5 mg/min is a dose of lidocaine 2 g/500 mL D5W. The IV pump should be set at a rate of 52.5 mL per hour.
Given 1mg/min = 60mg/hour
Then 3.5 mg/min = 3.5 x 60 mg/hour = 210mg/hour
Lidocaine is 2gm/500mL = 2000mg/500mL
If you only need to calculate the infusion rate, or the amount of medication to infuse per hour, you can do it by taking the entire volume in mL and dividing it by the total number of hours the medication is supposed to be infused over. This will give you the rate in mL per hour.
Then the flow of rate = 210mg/hour / 2000mg/500mL = 210x500/2000 = 52.5mL/hour.
To learn more about flow of rate click here https://brainly.com/question/24560420
#SPJ4
world production of ammonia is now about 30 times greater than it was in 1950 suggest why the demand for ammonia is increased
There are a few reasons why the demand for ammonia has increased over time:
Population growth: The world's population has grown significantly over the past 70 years, and as the population has grown, so has the demand for food. Ammonia is a key ingredient in the production of fertilizers, which are used to help grow crops and increase food production. As the population has increased, so has the demand for fertilizers, which has contributed to the increase in the production of ammonia.Industrialization: As more countries have industrialized and developed, there has been an increased demand for ammonia to use as a feedstock in the production of chemicals, plastics, and other industrial products.Energy production: Ammonia can be used as a source of renewable energy, and there has been an increased demand for clean energy sources in recent years. This has led to an increase in the production of ammonia for use in energy production.Environmental concerns: Ammonia can be used to reduce greenhouse gas emissions, and there has been an increased focus on finding ways to reduce environmental impact. This has led to an increase in the production of ammonia for use in environmental applications.Hope This Helps You!
what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
The two portions on this module for which we can broaden unit elements to do dimensional analysis with chemical materials are volume and mass.
volume is a degree of the quantity of three-dimensional space occupied by using an object or substance. it's miles regularly measured in liters, cubic centimeters, or cubic meters. volume is used to measure the potential of a field, the dimensions of an object, or the quantity of liquid or gas in a given space. it's also used to determine the mass of an item, because the density (mass in line with unit quantity) is often acknowledged.
the 2 portions of volume and mass are critical for doing dimensional analysis with chemical substances because they help to measure the amount of a substance in distinct gadgets. extent is vital for measuring the quantity of liquid materials, and mass is critical for measuring the quantity of strong substances. each of these portions are vital for accurate and specific measurements of chemical substances, making them crucial for dimensional analysis.
To know more about chemicals click here
https://brainly.com/question/26487468
#SPJ4