the radioactive isotope 237 th 90 has a rate constant of, k = 4.91 x 10^-11 yr^-1. is this nuclide useful for determining the age of bone samples?

The only compound that can be eliminated on this basis is the para-dichlorobenzene because its two carbon atoms are located in the para position with respect to the chlorine substituents, which are in the ortho position.

The chlorinated derivative of benzene with only two peaks for aromatic carbons in its 13c nmr spectrum indicates that two of the carbon atoms in the benzene ring are chemically equivalent and have the same chemical shift. This means that these two carbon atoms are either both ortho or both meta to the chlorine substituent.  In para-dichlorobenzene, all carbon atoms are chemically equivalent due to the symmetry of the molecule, which results in only one peak for aromatic carbons in its 13c nmr spectrum. Therefore, the correct answer is para-dichlorobenzene cannot be the compound in question.
Based on the information provided, we know that the chlorinated derivative of benzene has only two peaks for aromatic carbons in its 13C NMR spectrum. This indicates that there is a symmetry in the molecule, causing some of the aromatic carbons to be chemically equivalent and, therefore, appearing as fewer peaks in the spectrum.
To determine which compound can be eliminated based on this information, we would need a list of potential compounds to analyze. However, since the list is not provided, I cannot specify the compound to be eliminated. Please provide the list of compounds, and I will be happy to help you eliminate the incorrect option.

To know more about compounds visit:

https://brainly.com/question/14782984

#SPJ11

The standard cell potential, ∘cell, for the given reaction is +0.28 V.

To determine the standard cell potential, ∘cell, for the given reaction, we need to use the standard reduction potentials of Cu and Ag ions. From the online source or Appendix B of the textbook, we find that the standard reduction potentials are:
Cu^+ + e^- → Cu(s) E°red = +0.52 V
Ag^+ + e^- → Ag(s) E°red = +0.80 V
The reduction potential of Cu is less positive than that of Ag, indicating that Cu ions have a lower tendency to gain electrons and Ag ions have a higher tendency to lose electrons. Therefore, Ag^+ is reduced and Cu is oxidized.
Now, we can use the equation:
E°cell = E°red (reduction) - E°red (oxidation)
E°cell = E°red (Ag^+ + e^- → Ag(s)) - E°red (Cu(s) → Cu^+ + e^-)
E°cell = (+0.80 V) - (+0.52 V)
E°cell = +0.28 V
The positive value of ∘cell indicates that the reaction is spontaneous in the forward direction. The reduction of Ag^+ is favored over the reduction of Cu^+ and hence Ag will be reduced while Cu will be oxidized.

To know more about standard cell potential visit:

https://brainly.com/question/29653954

#SPJ11

When a strip of solid silver metal is put into a beaker of 0.083m Fe(NO3)2 solution, a reaction takes place between the two substances. The silver metal will start to dissolve in the solution, and the Fe(NO3)2 solution will start to turn a different color due to the formation of a new chemical compound.

The beaker in which this reaction takes place must be made of a material that can withstand the chemical reaction. Glass beakers are a common choice for this type of reaction because they are solid and can withstand the heat and pressure that can be generated during the reaction.
In order to fully understand the reaction between the silver metal and the Fe(NO3)2 solution, it is important to study the chemical properties of each substance. Solid silver metal is a good conductor of heat and electricity, and is known for its shiny and reflective appearance. Fe(NO3)2 solution, on the other hand, is a clear and colorless liquid that is used in various industrial applications.
Overall, the reaction between a strip of solid silver metal and a beaker of 0.083m Fe(NO3)2 solution is a complex process that requires careful observation and analysis. By understanding the chemical properties of each substance and the potential reactions that can occur, scientists can gain valuable insights into the world of chemistry.

To know more about beakers visit:

https://brainly.com/question/29475799

#SPJ11

The solubility of AgCl(s) in 1.5 M [tex]NH_{3}[/tex](aq) is [tex]2.63 *10^{-6} M[/tex]

The solubility of AgCl(s) in 1.5 M [tex]NH_{3}[/tex]aq) can be calculated using the following steps:

Step 1: Write the balanced chemical equation for the dissolution of AgCl(s) in [tex]NH_{3}[/tex](aq).

AgCl(s) + 2 [tex]NH_{3}[/tex](aq) ⇌ Ag([tex]NH_{3}[/tex])2+(aq) + Cl-(aq)

Step 2: Write the expression for the equilibrium constant (Ksp) for the dissolution of AgCl(s).

Ksp = [Ag+][Cl-] = 1.6 × [tex]10^{-10}[/tex]

Step 3: Write the expression for the equilibrium constant (Kf) for the complex ion formation of Ag([tex]NH_{3}[/tex])2+(aq).

Kf = [Ag([tex]NH_{3}[/tex])2+] / ([Ag+][NH3]2) = 1.7 × [tex]10^{7}[/tex]

Step 4: Set up the equilibrium table and fill in the initial concentrations and changes for each species. Let x be the concentration of AgCl(s) that dissolves.

AgCl(s) 2 NH3(aq) Ag(NH3)2+(aq) Cl-(aq)

Initial x 1.5 M 0 0

Change  x -2x +x +x

Equilibrium (x) (1.5-2x) M (x) (x)

Step 5: Substitute the equilibrium concentrations into the equilibrium constant expressions and solve for x.

Kf = [Ag([tex]NH_{3}[/tex])2+] / ([Ag+][[tex]NH_{3}[/tex]]2) = (x) / ([Ag+]([[tex]NH_{3}[/tex]]2 - 2x))

1.7 × 107 = x / ((x)(1.5 - 2x)2) = x / (2.25x2 - 6x + 2.25)

x = 2.63 × [tex]10^{-6}[/tex]M

Ksp = [Ag+][Cl-] = (2.63 × [tex]10^{-6}[/tex] M)(2.63 × [tex]10^{-6}[/tex] M) = 6.91 × [tex]10^{-12}[/tex]

Step 6: Check the assumption that 2x << 1.5 M. If this assumption is valid, then the calculated solubility is accurate.

2x / 1.5 M = 2.63 × [tex]10^{-6}[/tex]M / 1.5 M = 1.75 × [tex]10^{-6}[/tex] << 1, so the assumption is valid.

Therefore, the solubility of AgCl(s) in 1.5 M NH3(aq) is 2.63 ×[tex]10^{-6}[/tex] M.

Know more about   solubility    here:

https://brainly.com/question/9098308

#SPJ11

The pH of the half way point is approximately 1.59 (rounded to two significant figures).

The reaction between HF and NaOH is:

HF + NaOH → NaF + H₂O

At the half-equivalence point, half of the HF has reacted with NaOH to form NaF, and the other half remains as HF. This means that the moles of NaOH added is equal to the moles of HF consumed.

The initial moles of HF in the solution is:

0.10 mol/L × 0.50 L = 0.050 mol

At the half-equivalence point, 0.025 moles of NaOH has been added, which reacts with 0.025 moles of HF.

The moles of HF remaining in the solution is:

0.050 mol - 0.025 mol = 0.025 mol

The concentration of HF remaining in solution is:

0.025 mol / 0.25 L = 0.10 M

The dissociation of HF in water is:

HF + H2O ↔ H3O+ + F-

The Ka expression for HF is:

Ka = [H3O+][F-] / [HF]

Assuming x is the concentration of H₃O+ and F-, and the initial concentration of HF is equal to its concentration at the half-equivalence point, we can write the equilibrium expression for HF as:

Ka = x^2 / (0.10 - x)

At the half-equivalence point, the concentration of HF remaining in solution is 0.10 M.

Therefore, we can simplify the equation to:

Ka = x^2 / (0.10 - x) ≈ x^2 / 0.10

Solving for x gives:

x = sqrt(Ka × [HF]) = sqrt(6.8 × 10^-4 × 0.10) ≈ 0.026

The pH at the half-equivalence point can be calculated from the concentration of H₃O+:

pH = -log[H₃O+] = -log(0.026) ≈ 1.59

Therefore, the pH of the half way point is approximately 1.59 (rounded to two significant figures).

To learn more about pH refer here:

https://brainly.com/question/15289741#

#SPJ11

A precipitate will form when 5.0 mL of 3.0 x 10-4 M Pb(NO3)2 is mixed with 5.0 mL of 3.0 x 10-4 M Na2CrO4.

Based on the given information, it is possible to determine if a precipitate will form when 5.0 mL of 3.0 x 10-4 M Pb(NO3)2 is mixed with 5.0 mL of 3.0 x 10-4 M Na2CrO4. The Ksp value for PbCrO4 is 2 x 10-14.
To determine if a precipitate will form, we need to calculate the reaction quotient (Q) by multiplying the concentrations of the ions in the solution.
Pb(NO3)2 dissociates into Pb2+ and NO3- ions, while Na2CrO4 dissociates into 2Na+ and CrO42- ions. When these two solutions are mixed, the Pb2+ and CrO42- ions can combine to form PbCrO4 precipitate.
The balanced chemical equation for this reaction is:
Pb(NO3)2 + Na2CrO4 → PbCrO4 + 2NaNO3
The concentration of Pb2+ ions in the solution is 3.0 x 10-4 M, as well as the concentration of CrO42- ions in the solution. Therefore, the reaction quotient Q can be calculated as:
Q = [Pb2+][CrO42-] = (3.0 x 10-4 M) x (3.0 x 10-4 M) = 9.0 x 10-8
Comparing the Q value with the Ksp value for PbCrO4 (2 x 10-14), we can determine if a precipitate will form. If Q is greater than Ksp, a precipitate will form. If Q is less than Ksp, no precipitate will form.
In this case, Q is 9.0 x 10-8, which is greater than Ksp (2 x 10-14).

To know more about Ksp visit:

brainly.com/question/31642824

#SPJ11

When a solid is dissolved in water inside a eudiometer tube, the volume of water in the tube is overestimated due to the increase in the total volume of the solution.

As a result, the pressure inside the eudiometer tube is underestimated because the calculated pressure is based on the assumption that the volume of water is equal to the original volume before the solid was dissolved. However, the actual volume is higher due to the added volume of the solid, leading to a lower pressure reading than expected. Therefore, it is important to consider the change in volume when calculating the pressure inside the eudiometer tube to obtain accurate results.

To know more about eudiometer tube, here

brainly.com/question/30784273

#SPJ4

--The complete Question is,  When a solid is dissolved in water inside a eudiometer tube, it causes the volume of water in the tube to be overestimated. How does this affect the calculation of pressure inside the eudiometer tube? Is the pressure overestimated or underestimated as a result?--

Stereoisomers are compounds that have the same molecular formula and connectivity of atoms but differ in the arrangement of their atoms in space.

The still unclear and incomplete without information about the specific reaction(s) being referred to. In order to draw the products formed and their stereoisomers, it is necessary to know the reactants, conditions, and any other relevant factors that are involved in the reaction. Without this information, it is impossible to provide a meaningful. Therefore, I cannot provide a response until more details are provided. Please provide more information about the specific reaction(s) that the is referring to, and I will be happy to help you with your query.

Learn more about stereoisomers here;

https://brainly.com/question/31492606

#SPJ11

3.2 moles of H2 are required to react with 3.2 moles of Cl2 according to the balanced chemical equation H2 + Cl2 = 2HCl.

According to the balanced chemical equation you provided (H2 + Cl2 = 2HCl), one mole of hydrogen gas (H2) reacts with one mole of chlorine gas (Cl2) to produce two moles of hydrogen chloride (HCl). In order to determine how many moles of H2 are required to react with 3.2 moles of Cl2, we can use the stoichiometric coefficients from the balanced equation.
Since the stoichiometric ratio between H2 and Cl2 is 1:1, we can conclude that for every mole of Cl2, one mole of H2 is needed. Therefore, to react with 3.2 moles of Cl2, you would require 3.2 moles of H2.
In summary, 3.2 moles of H2 are required to react with 3.2 moles of Cl2 according to the balanced chemical equation H2 + Cl2 = 2HCl.

learn more about chemical

https://brainly.com/question/11850086

#SPJ11

Alanine is an amino acid that has a simple structure consisting of a carboxylic acid group (-COOH) and an amino group (-[tex]NH_{2}[/tex]) attached to a central carbon atom. In contrast, isoleucine is a more complex amino acid that has a branched chain structure with an additional methyl group.

Solubility is dependent on the ability of the molecules to interact with the water molecules through hydrogen bonding. Alanine has a polar side chain ([tex]-CH_{3}-COOH[/tex]) that can form hydrogen bonds with the water molecules, whereas isoleucine has a nonpolar side chain [tex](-CH(CH_{3} )x_{2}COOH)[/tex] that cannot form hydrogen bonds with water. The nonpolar side chain of isoleucine is hydrophobic, meaning it repels water molecules, leading to decreased solubility.

Furthermore, presence of methyl group in isoleucine makes it less polar than alanine, resulting in weaker interactions with water molecules. Therefore, alanine is more soluble in water than isoleucine due to its smaller, polar side chain, and the absence of a bulky methyl group.

Know more about  amino acid here:

https://brainly.com/question/28409615

#SPJ11

(a) The limiting reactant is Mg.
(b) The excess reactant is N₂
(c) The number of moles of magnesium nitride produced is 0.683 moles.

(a) To find the limiting reactant, we first need to determine the mole ratio of Mg to N₂ in the balanced equation, which is 3:1. Next, divide the given moles of each reactant by their respective stoichiometric coefficients:

Mg: 2.05 mol / 3 = 0.683
N₂: 0.891 mol / 1 = 0.891

Since 0.683 is smaller than 0.891, Mg is the limiting reactant.

(b) The excess reactant is the other reactant, which is N₂ in this case.

(c) To find the number of moles of magnesium nitride (Mg₃N₂) produced, we use the mole ratio between Mg and Mg₃N₂, which is 3:1. Since Mg is the limiting reactant, we have:

Moles of Mg₃N₂ = (1 mol Mg₃N₂ / 3 mol Mg) × 2.05 mol Mg = 0.683 mol Mg₃N₂

So, 0.683 moles of magnesium nitride are produced in the reaction.

Learn more about limiting reactant here: https://brainly.com/question/26905271

#SPJ11

For the given equations we need to calculate the ΔS⁰298 (in J/K/mol),

(a) -64.6 J/K/mol

(b) -51.1 J/K/mol

(c) +1.6 J/K/mol

(d) +92.2 J/K/mol

(e) +223.0 J/K/mol

(f) -320.7 J/K/mol

(g) +101.3 J/K/mol

(a) ΔS⁰298 for MnS(s) + Mg(s) → MgS(s) + Mn(s): is -64.6 J/K/mol.

The reaction involves the solid-state formation of two sulfides, and the entropy of the reaction decreases because the reactants have greater entropy than the products.

(b) ΔS⁰298 for [tex]CHCl_3[/tex](g) →[tex]CHCl_3[/tex](l) is: -51.1 J/K/mol.

When CHCl3 changes from the gas phase to the liquid phase, the number of accessible microstates decreases, resulting in a decrease in entropy.

(c) ΔS⁰298 for Pb(s) + [tex]H_2SO_4[/tex](aq) → [tex]PbSO_4[/tex](s) +[tex]H_2[/tex](g) is: +1.6 J/K/mol.

The reaction involves the formation of gas and solid products from a solid metal and an aqueous solution. The entropy change is positive because the number of accessible microstates increases when a solid reacts with a liquid.

(d) ΔS⁰298 for [tex]C_6H_6[/tex](l) → [tex]C_6H_6[/tex](g) is: +92.2 J/K/mol.

The transition from the condensed phase to the gas phase results in an increase in the entropy of the system, as the number of accessible microstates increases.

(e) ΔS⁰298 for 2 Cl(g) → [tex]Cl_2[/tex](g) is: +223.0 J/K/mol.

The reaction involves a decrease in the number of moles of gas in the system, resulting in a decrease in entropy.

(f) ΔS⁰298 for [tex]Mn_2O_3[/tex](s) + 2 Fe(s) → [tex]Fe_2O_3[/tex](s) + 2 Mn(s) is: -320.7 J/K/mol.

The reaction involves the solid-state formation of two oxides, and the entropy of the reaction decreases because the reactants have greater entropy than the products.

(g) ΔS⁰298 for [tex]CBr_4[/tex](s) → [tex]CBr_4[/tex](g) is: +101.3 J/K/mol.

The transition from the condensed phase to the gas phase results in an increase in the entropy of the system, as the number of accessible microstates increases.

To know more about "Entropy" refer here:

https://brainly.com/question/28382979#

#SPJ11

I can provide a balanced chemical equation.The balanced chemical equation for the reaction is:

Reactant: A + B

Product (E,Z isomer): C

Product (E,E isomer): D

However, I can provide you with a balanced chemical equation and describe the structures in words.

The balanced chemical equation for the reaction is:

Reactant: A + B

Product (E,Z isomer): C

Product (E,E isomer): D

In words, the reaction involves the reactants A and B combining to form two different products. One product is the E,Z isomer, denoted as C, and the other product is the E,E isomer, denoted as D.

The structures of the reactants and products would need to be represented using appropriate chemical diagrams or models to illustrate their specific configurations.

Learn more about balanced chemical equation

brainly.com/question/29130807

#SPJ11

The chance of both electrons being found on one atom cannot be determined without the specific form of the normalized valence bond wave function. More information is required to calculate the probability.

To determine the chance that both electrons of the bond will be found on one atom during 1000 inspections, we need to know the specific form of the normalized valence bond wave function. This function describes the electron distribution in the molecule and is crucial for calculating probabilities related to electron positions. Once we have the wave function, we can square its amplitude to find the probability density for a particular electron configuration.

Then, we can use this probability to determine the chance of observing both electrons on one atom during 1000 inspections. Unfortunately, without the form of the wave function, it's impossible to provide an accurate probability for this scenario.

To know more about the electrons visit:

https://brainly.com/question/30025165

#SPJ11

The freezing point of the solution will be lowered by approximately 0.21°C compared to pure water.

The freezing point depression of a solution depends on the molality of the solute particles in the solution.

To calculate the molality of the solution, we need to convert the weight percentages to mole fractions.

The molar masses of urea and glucose are 60.06 g/mol and 180.16 g/mol, respectively.

The mole fraction of urea = (5 g / 60.06 g/mol) / [(5 g / 60.06 g/mol) + (10 g / 180.16 g/mol)] = 0.151

The mole fraction of glucose = (10 g / 180.16 g/mol) / [(5 g / 60.06 g/mol) + (10 g / 180.16 g/mol)] = 0.849

The molality of the solution = (0.151 mol / 0.1 kg) + (0.849 mol / 0.1 kg) = 10 mol/kg

The freezing point depression, ΔTf​, of the solution is given by ΔTf​ = Kf​ x molality x i, where i is the van't Hoff factor.

The van't Hoff factor for both urea and glucose is 1.

Therefore, ΔTf​ = 1.86 Kkgmol−1 x 10 mol/kg x 1 = 18.6 K

The freezing point of pure water is 0°C or 273.15 K. So, the freezing point of the solution will be lowered by approximately 18.6/1.86 = 10°C or 0.21°C compared to pure water

For more such questions on freezing, click on:

https://brainly.com/question/24314907

#SPJ11.

the freezing point of the solution containing 5% by weight of urea and 10% by weight of glucose is -3.37°C.

To calculate the freezing point of the solution, we can use the equation:

ΔTf = Kf·m

where ΔTf is the freezing point depression, Kf is the freezing point depression constant (1.86 K·kg/mol for water), and m is the molality of the solution.

First, we need to calculate the molality of the solution. Molality is defined as the number of moles of solute per kilogram of solvent, so we need to determine the masses of urea and glucose and the mass of water.

Assuming we have 100 g of solution, the mass of urea is 5 g and the mass of glucose is 10 g. The mass of water is therefore:

100 g - 5 g - 10 g = 85 g

The number of moles of each solute can be calculated using their molecular weights:

nurea = 5 g / 60.06 g/mol = 0.0832 mol

nglucose = 10 g / 180.16 g/mol = 0.0555 mol

The molality of the solution can be calculated as:

molality = (0.0832 mol + 0.0555 mol) / 0.085 kg = 1.81 mol/kg

Now we can use the freezing point depression equation to calculate the freezing point of the solution:

ΔTf = Kf·m = (1.86 K·kg/mol) · (1.81 mol/kg) = 3.37 K

The freezing point of pure water is 0°C (273.15 K), so the freezing point of the solution will be:

0°C - 3.37 K = -3.37°C

learn more about freezing point of the solution  here:

https://brainly.com/question/31357864

#SPJ11

Therefore, the speed at which [Br2] is increasing is 0.066 m/s.

To solve this problem, we need to use the rate of reaction formula, which is:
Rate of reaction = (1/coeff. of reactant) x (d[reactant]/dt) = (1/coeff. of product) x (d[product]/dt)
Here, the coefficient of Br- is 5 and the coefficient of Br2 is 3. Therefore,
(d[Br2]/dt) = (3/5) x (-d[Br-]/dt)
Substituting the given value of d[Br-]/dt as -0.11 m/s, we get:
(d[Br2]/dt) = (3/5) x (0.11) = 0.066 m/s
The negative sign indicates that the concentration of Br- is decreasing, and the positive sign of the rate of [Br2] indicates that its concentration is increasing. The reaction involves the conversion of Br- to Br2, so as Br- concentration decreases, the Br2 concentration increases.

To know more about reaction visit:

https://brainly.com/question/29762834

#SPJ11

In the titration of a 10.00 mL aliquot of the solution, approximately 70.7 mL of NaOH is used to react with the sample containing CaCO3 and HCl.

To calculate the volume of NaOH used in the titration, we first need to determine the number of moles of CaCO3 that reacted with HCl.

The molar mass of CaCO3 is 100.09 g/mol. We can calculate the number of moles of CaCO3 by dividing the given mass by the molar mass:

moles of CaCO3 = 0.205 g / 100.09 g/mol = 0.002049 mol.

The balanced chemical equation for the reaction between CaCO3 and HCl is:

CaCO3 + 2HCl -> CaCl2 + CO2 + H2O.

From the equation, we can see that 1 mole of CaCO3 reacts with 2 moles of HCl. Therefore, the number of moles of HCl used can be calculated as:

moles of HCl = 2 * moles of CaCO3 = 2 * 0.002049 mol = 0.004098 mol.

Since the concentration of HCl is given as 2.00 M and the volume used is 7.50 mL, we can calculate the number of moles of NaOH used using the stoichiometry of the balanced equation between HCl and NaOH.

From the balanced equation:

2NaOH + H2SO4 -> Na2SO4 + 2H2O.

We see that 2 moles of NaOH react with 1 mole of H2SO4. Therefore, the number of moles of NaOH used is:

moles of NaOH = 0.004098 mol.

Finally, to determine the volume of NaOH used, we can use the molar concentration of NaOH (0.058 M) and the number of moles of NaOH:

volume of NaOH = moles of NaOH / concentration of NaOH = 0.004098 mol / 0.058 M = 0.0707 L.

Since the volume is given in liters, we need to convert it to milliliters by multiplying by 1000:

volume of NaOH = 0.0707 L * 1000 mL/L = 70.7 mL.

Therefore, approximately 70.7 mL of NaOH are used in the titration.

Learn more about NaOH here: brainly.com/question/20573731

#SPJ11

Without additional information about the composition, it is not possible to determine the phases present at a temperature of 1800 °C.

However, assuming that the composition is known, we can use a phase diagram to determine the phases present at that temperature and their compositions.

A phase diagram is a graphical representation of the phases that are present in a system as a function of temperature, pressure, and composition.

It can be used to determine the conditions under which different phases are stable and the compositions of those phases.

Once the composition is known, we can locate it on the phase diagram and determine the phases that are present at 1800 °C.

We can then use the lever rule to calculate the compositions and weight fractions of each phase.

The lever rule is a simple way to calculate the compositions and weight fractions of the phases present in a two-phase system.

It states that the weight fraction of one phase is proportional to the length of the tie line that connects the composition of the two phases on the phase diagram.

However, without the composition or the phase diagram, it is not possible to provide a specific answer to this question.

To know more about lever rule refer here

https://brainly.com/question/30195471#

#SPJ11

The complex ion that is optically active is (a) cis-[CoCl2(en)2]*. This is because it has a chiral center, meaning that it is not superimposable on its mirror image. This property arises due to the presence of two different ligands on the same side of the central cobalt atom.
Of the given octahedral complexes, (c) (CrCl2(en)2]* and (d) (CrCl4(en)] are expected to exhibit geometric isomerism. This is because they have two different ligands on opposite sides of the central chromium atom, resulting in cis and trans isomers. The other complexes have ligands that are either all the same or arranged symmetrically, so they do not exhibit geometric isomerism.

The optically active complex ion among the given options is (a) cis-[CoCl2(en)2]^+. Optically active compounds have the ability to rotate plane-polarized light due to their chiral nature. In cis-[CoCl2(en)2]^+, the arrangement of ligands is not symmetrical, making it chiral and optically active.
Regarding octahedral complexes exhibiting geometric isomerism, we can expect this phenomenon in complexes with at least two different types of ligands. In this case, (b) [CrCl2(H2O)(NH3)3] and (c) [CrCl2(en)2]^+ are likely to exhibit geometric isomerism. Both complexes have different ligands, allowing for the formation of cis and trans isomers, which are the basis of geometric isomerism.

To know more about geometric isomerism visit:

https://brainly.com/question/28295773

#SPJ11

The compounds arranged in order of increasing number of hydrogen atoms/ions per formula unit are 1. Lithium hydride

2. Barium hydroxide , 3. Ammonium carbonate , 4. Ammonium chlorate.

Lithium hydride (LiH) has one hydrogen atom per formula unit.

Barium hydroxide ([tex]Ba(OH)_2[/tex]) has two hydrogen atoms per formula unit.

Ammonium carbonate (([tex]NH_4)2CO_3[/tex]) has four hydrogen atoms per formula unit, as there are two ammonium ions, each containing one hydrogen ion, and one carbonate ion, containing two hydrogen ions.

Ammonium chlorate ([tex]NH_4ClO_3[/tex]) has five hydrogen atoms per formula unit, as there is one ammonium ion containing one hydrogen ion, and one chlorate ion containing three hydrogen ions.

Therefore, the correct order from fewest to greatest number of hydrogen atoms/ions per formula unit is:

Lithium hydride < Barium hydroxide < Ammonium carbonate < Ammonium chlorate

To know more about hydrogen refer here :

https://brainly.com/question/24433860

#SPJ11

The amount of [tex]H_2[/tex](g) present in a reaction mixture at equilibrium can be maximized by manipulating the stoichiometry, increasing reactant concentration and lowering the pressure

To maximize the amount of [tex]H_2[/tex](g) present in a reaction mixture at equilibrium, there are a few key factors to consider.

1. Manipulating the stoichiometry: Adjusting the balanced equation of the reaction can influence the equilibrium position. If the desired product is H2(g), ensuring that it appears on the product side while minimizing the reactants’ presence can increase the yield of [tex]H_2[/tex](g).

2. Increasing reactant concentration: According to Le Chatelier’s principle, increasing the concentration of reactants will shift the equilibrium towards the products. Therefore, adding excess reactants, especially those involved in the production of [tex]H_2[/tex](g), can enhance the amount of [tex]H_2[/tex](g) at equilibrium.

3. Lowering the pressure: For reactions involving gases, reducing the pressure shifts the equilibrium towards the side with a higher number of moles of gas. As [tex]H_2[/tex](g) is a product, decreasing the pressure can help maximize its presence in the reaction mixture.

4. Removing [tex]H_2[/tex](g) as it forms: Employing a suitable method to remove [tex]H_2[/tex](g) as it is produced can also enhance the amount of [tex]H_2[/tex](g) at equilibrium. By removing the product, Le Chatelier’s principle drives the reaction to produce more of the desired product to restore equilibrium.

Learn more about Le Chatelier’s principle here:

https://brainly.com/question/16741076

#SPJ11

According to the given  question we can balance  as redox reactions occurring in acidic aqueous solution in Chemical Equation .

Part A:
In this reaction, K is oxidized to K+ while Al3+ is reduced to Al. To balance this reaction, we can first write the unbalanced equation:

K + Al3+ → Al + K+

Next, we can balance the charges by adding electrons:

K + Al3+ + 3e- → Al + K+

Now we can balance the number of atoms on each side:

2K + Al3+ + 3e- → 2Al + 2K+

Finally, we can add the appropriate coefficients to balance the number of electrons:

2K(s) + Al3+(aq) + 3H2O(l) → 2Al(s) + 2K+(aq) + 3H2O(l) + 3H+(aq)

Part B:
In this reaction, Cr is oxidized to Cr3+ while Fe2+ is reduced to Fe. To balance this reaction, we can first write the unbalanced equation:

Cr + Fe2+ → Cr3+ + Fe

Next, we can balance the charges by adding electrons:

Cr + Fe2+ + 2e- → Cr3+ + Fe

Now we can balance the number of atoms on each side:

2Cr + 3Fe2+ + 6e- → 2Cr3+ + 3Fe

Finally, we can add the appropriate coefficients to balance the number of electrons:

2Cr(s) + 3Fe2+(aq) + 7H2O(l) → 2Cr3+(aq) + 3Fe(s) + 14H+(aq)

Part C:
In this reaction, IO3- is reduced to I- while N2H4 is oxidized to N2. To balance this reaction, we can first write the unbalanced equation:

IO3- + N2H4 → I- + N2

Next, we can balance the number of nitrogen atoms on each side by adding a coefficient of 3 to N2:

IO3- + N2H4 → I- + 3N2

Now we can balance the number of oxygen atoms on each side by adding a coefficient of 5 to IO3-:

5IO3- + N2H4 → 5I- + 3N2

Finally, we can add the appropriate coefficients to balance the number of atoms on each side:

5IO3-(aq) + N2H4(g) + 8H+(aq) → 5I-(aq) + 3N2(g) + 12H2O(l)

In summary, balancing redox reactions requires identifying the oxidized and reduced species, balancing charges by adding electrons, balancing atoms on each side, and adding coefficients to balance the number of electrons.

To know more about Redox Reaction visit :

https://brainly.com/question/13293425

#SPJ11

The properties that are not usually exhibited by solid ionic compounds are high volatility and good conductivity.

Ionic compounds have strong electrostatic bonds between ions, which results in their high melting points. This means that they require a lot of energy to break the bonds and transition from a solid state to a liquid state, making them generally not volatile. Additionally, ionic compounds do not conduct electricity well as solids, as their ions are not free to move and carry a charge.

However, when melted or dissolved in water, the ions become mobile and can conduct electricity. Therefore, high volatility and good conductivity are not typical properties of solid ionic compounds. The properties not usually exhibited by solid ionic compounds are high volatility and good conductivity.

To know more about ionic compounds visit:

https://brainly.com/question/3222171

#SPJ11

Answer:

H2

Explanation:

Calculate using the Avogadro's number

We have found that [tex]H_2[/tex] (10 grams) contains the greatest number of hydrogen atoms.

The molar mass for every substance i:

We find the Number of moles of each substance as well

= mass (g) / molar mass (g/mol)

Number of moles = 10 g / 16.05 g/mol

Number of moles[= 0.623 moles

Number of moles = 10 g / 36.46 g/mol

Number of moles =  0.274 moles

Number of moles = 10 g / 2.02 g/mol

Number of moles =  4.95 moles

Number of moles = 10 g / 33.02 g/mol

Number of moles  =  0.303 moles

Now, let's consider the stoichiometry to determine the number of hydrogen atoms in each substance:

For [tex]CH_4[/tex], there is 1 hydrogen atom per molecule.

For HCl, there is 1 hydrogen atom per molecule.

For [tex]H_2[/tex], there are 2 hydrogen atoms per molecule.

For [tex]PH_3[/tex], there are 3 hydrogen atoms per molecule.

We then find the total hydrogen atom in each substance and compare with other each other.

[tex]H_2[/tex]  has the greatest number of hydrogen atoms,.

Learn more about Number of moles at:

https://brainly.com/question/15356425

#SPJ4

Electrons in an orbital with l = 3 are in a g orbital. The value of l in the orbital quantum number (l) determines the shape of the orbital. The possible values of l are integers ranging from 0 to n-1, where n is the principal quantum number. The l value also determines the subshell to which the orbital belongs.

For l = 3, the subshell is the f subshell, which can hold a maximum of 14 electrons. The shape of the f orbital is complex, and it has no nodes. The orientation of the orbital is along the x, y, and z axes. There are a total of seven f orbitals, each with a different orientation.
The g orbital, which is the orbital with l = 4, is the next highest orbital after the f orbital. It has a more complex shape than the f orbital, with two nodes. The g orbital has nine different orientations. However, electrons with l = 3 are not in the g orbital, but rather in the f orbital.
In conclusion, electrons in an orbital with l = 3 are in an f orbital, not a g or s orbital. The f orbital has a complex shape, and the orientation of the orbital is along the x, y, and z axes.

For more such question on Electrons

https://brainly.com/question/31882691

#SPJ11

The quantum number l describes the shape of the atomic orbital and can take on integer values ranging from 0 to n-1, where n is the principal quantum number.

The letters used to designate the different orbital shapes are s, p, d, f, and so on, with increasing values of l.

For l = 3, the orbital shape is designated as f, which can hold a maximum of 14 electrons. Therefore, the correct answer is (b) f orbital. An atomic orbital is a mathematical function that describes the probability of finding an electron in a given region of space around an atomic nucleus. The shape of the orbital is determined by the values of three quantum numbers: the principal quantum number (n), the azimuthal quantum number (l), and the magnetic quantum number (m). The principal quantum number determines the size of the orbital, while the azimuthal and magnetic quantum numbers determine its shape and orientation.

Learn more about atomic orbital here:

https://brainly.com/question/31732719

#SPJ11

The given statement "The molecular structure of polymers may be described as a long chains of repeating molecular units." is true. The molecular structure of polymers can indeed be described as long chains of repeating molecular units.

These repeating units are known as monomers, which are linked together through covalent bonds to form a polymer chain. The length of the polymer chain can vary greatly, from just a few monomers to thousands or even millions. This repeating pattern of monomers gives polymers their unique physical and chemical properties, such as flexibility, strength, and resistance to heat and chemicals.

Polymers can also be designed with specific properties by manipulating the monomers used and the way they are linked together. Overall, the molecular structure of polymers is critical to their function and utility in a wide range of applications.

More on polymers: https://brainly.com/question/28302230

#SPJ11

It is true that the molecular structure of polymers can be described as long chains of repeating molecular units, also known as monomers.

Polymers are macromolecules made up of many smaller units (monomers) that are chemically bonded together.

The repeating units can be identical or slightly different, depending on the specific polymer.

These chains can be linear or branched, and the properties of the polymer depend on its molecular structure, as well as the chemical and physical properties of the monomers that make it up.

So, the statement that the molecular structure of polymers can be described as long chains of repeating molecular units is true.

Read more about the Polymers.

https://brainly.com/question/17354715

#SPJ11

The statement "hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts." is true.

Hydrogen can be prepared through electrolysis, which is a process that uses an electric current to drive a non-spontaneous chemical reaction. In this case, an aqueous solution of magnesium salts (such as magnesium sulfate) can be used.

When an electric current is applied to the solution, it causes the ions in the solution to move towards their respective electrodes. The positively charged magnesium ions move towards the cathode, while the negatively charged anions (such as sulfate) move towards the anode.

At the cathode, hydrogen gas is produced as a result of the reduction of water molecules, while the magnesium ions are reduced to solid magnesium.

Meanwhile, at the anode, oxygen gas is produced from the oxidation of water molecules, and the anions in the magnesium salts are oxidized. This process effectively produces hydrogen gas and leaves behind solid magnesium as a byproduct.

To know more about electrolysis click on below link:

https://brainly.com/question/31726896#

#SPJ11

The volume of 25 grams of O2 at 2.5 atmospheres and 25°C is 8.06 L.

To solve this problem, we will use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin. We can rearrange the equation to solve for volume: V = nRT/P

First, we need to calculate the number of moles of O2. We can use the molar mass of O2 to convert the given mass to moles: moles O2 = 25 g / 32 g/mol = 0.78125 moles

Next, we need to convert the temperature to Kelvin: T = 25°C + 273.15 = 298.15 K

Now we can plug in the values for n, R, P, and T into the equation to find the volume: V = (0.78125 moles)(0.08206 L·atm/mol·K)(298.15 K)/(2.5 atm) = 8.06 L

Therefore, the volume of 25 grams of O2 at 2.5 atmospheres and 25°C is 8.06 L.

To know more about volume, refer here:

https://brainly.com/question/3134584#

#SPJ11

The neutralization reactions can be completed and balanced as follows:

28. 2CsOH + H2CO3 → Cs2CO3 + 2H2O

29. 2HF + Mg(OH)2 → MgF2 + 2H2O

30. 3HNO3 + Al(OH)3 → Al(NO3)3 + 3H2O

31. H2O + FrF → FrOH + HF

32. H2O + LiBrO → LiOH + HBrO

28. The neutralization reaction between CsOH (cesium hydroxide) and H2CO3 (carbonic acid) results in the formation of Cs2CO3 (cesium carbonate) and 2H2O (water). The balanced equation is: 2CsOH + H2CO3 → Cs2CO3 + 2H2O.

29. The neutralization reaction between HF (hydrofluoric acid) and Mg(OH)2 (magnesium hydroxide) produces MgF2 (magnesium fluoride) and 2H2O (water). The balanced equation is: 2HF + Mg(OH)2 → MgF2 + 2H2O.

30. The neutralization reaction between HNO3 (nitric acid) and Al(OH)3 (aluminum hydroxide) yields Al(NO3)3 (aluminum nitrate) and 3H2O (water). The balanced equation is: 3HNO3 + Al(OH)3 → Al(NO3)3 + 3H2O.

31. The reaction between H2O (water) and FrF (francium fluoride) results in the formation of FrOH (francium hydroxide) and HF (hydrofluoric acid). The balanced equation is: H2O + FrF → FrOH + HF.

32. The neutralization reaction between H2O (water) and LiBrO (lithium hypobromite) forms LiOH (lithium hydroxide) and HBrO (hypobromous acid). The balanced equation is: H2O + LiBrO → LiOH + HBrO.

To learn more about neutralization reactions, refer:-

https://brainly.com/question/27745033

#SPJ11

Considering the limiting reactant concept, from the given reaction, 3.00 moles of C will be produced when 2.00 moles of A and 4.50 moles of B react.

To determine the moles of C produced from the reaction of 2.00 moles of A and 4.50 moles of B, we need to identify the limiting reactant. The limiting reactant is the one that is completely consumed and determines the maximum amount of product that can be formed.

First, we need to determine the stoichiometric ratio between A, B, and C based on the balanced equation. From the balanced equation:

1 mole of A reacts with 3 moles of B to produce 2 moles of C.

Now, we can calculate the moles of C produced by comparing the moles of A and B:

For A, we have 2.00 moles.

For B, we have 4.50 moles.

To find the limiting reactant, we compare the moles of each reactant with their respective stoichiometric ratios in the balanced equation.

For A:

2.00 moles A * (3 moles B / 1 mole A) = 6.00 moles B required

For B:

4.50 moles B * (1 mole A / 3 moles B) = 1.50 moles A required

Based on the calculations, we see that we need 6.00 moles of B to react with 2.00 moles of A. However, we only have 4.50 moles of B available. This means that B is the limiting reactant, as it will be completely consumed before A.

Since 2 moles of C are produced for every 3 moles of B, and we have 4.50 moles of B, we can calculate the moles of C produced:

4.50 moles B * (2 moles C / 3 moles B) = 3.00 moles C

Therefore, from the given reaction, 3.00 moles of C will be produced when 2.00 moles of A and 4.50 moles of B react.

Learn more about limiting reactant here:

https://brainly.com/question/19031443

#SPJ11