What factors are the most critical in determining whether a fossil is preserved?
A. the age of the fossil and the age of sediments in which it is preserved
B. the temperature of the granite and how fast it cooled
C. whether the creature had hard parts and how fast it was buried
D. the color of the original organism compared to the color of the sediments in which it is found
E. whether the creature was a predator or was prey

The power of the lift motor is 330 Watts.

The work done by the lift motor can be calculated using the formula for work which is Work = Force x Distance,

where

In this case, the lifting force can be calculated as the gravitational force acting on the lift, which is given by the formula Force = mass x acceleration due to gravity. The acceleration due to gravity is 9.8 m/s^2

So the work done by the lift motor is:

Work = (200 kg) x (9.8 m/s^2) x (2 m) = 3960 Joules

The power of the lift motor can be calculated as the work done per unit time. In this case, the time taken was 0.2 minutes, which is equivalent to 0.2 x 60 = 12 seconds.

So the power of the lift motor is:

Power = Work / Time = 3960 Joules / 12 seconds = 330 Watts.

Learn more about gravitational force here : brainly.com/question/13010127

#SPJ1

The work done by Josh in running up a 7 m high flight of stairs in 5.5 s, given that she has a mass of 65 Kg is 4459 J

Work is defined by the following formula:

Work = Force × distance

Where gravity applies, the work is defined as:

Work (W) = Mass (m) × acceleration due to gravity (g) × height (h)

The following data were obtained from the question

Using the above formula, we can obtain the work done by Josh as follow:

Work done (W) = Mass (m) × acceleration due to gravity (g) × height (h)

Work done = 65 × 9.8 × 7

Work done = 4459 J

Thus, we can conclude that the work done by Josh is 4459 J

Learn more about workdone:

https://brainly.com/question/14667371

#SPJ1

Suppose an asteroid orbiting the sun had an orbital period of 7.5 years. 2.72 AU would its orbital radius be

Calculating the problem:

T² = k × R³

T = 7.5 years = 7.5 x 365.25 days/year = 2737.125 days

T = 2737.125 days x 24 hours/day x 60 minutes/hour x 60 seconds/minute = 2.29 x 10⁷ seconds

1 AU is the average distance between the Earth and the Sun.

R³ = T² / k

R = (T² / k)¹/³

R = (2.29 x 10⁷ s)² / k)¹/³

k = 4π² / (6.67 x 10⁻¹¹ m³ kg⁻¹ s⁻² * 1.989 x 10³⁰ kg) = 0.01720209895 x 10¹⁹ m³/s²

R = ((2.29 x 10⁷ s)² / 0.01720209895 x 10¹⁹ m³/s²)¹/³ = 2.72 AU

The amount of time it takes for an astronomical object to complete one orbit around another object is known as the orbital period (also called the revolution period). It typically refers to planets or asteroids that orbit the Sun, moons that orbit planets, exoplanets that orbit other stars, and binary stars in astronomy.

The distance a planet is from the Sun changes the speed of its orbit. The speed at which a planet moves and the strength of the Sun's gravitational pull on it increase with increasing distance from the Sun. The Sun's gravitational pull is weaker and its orbit moves more slowly the further away it is from the Sun.

Learn more about orbital period:

brainly.com/question/22247460

#SPJ1

Answer:

λ = V T        S is distance between wavefronts, T is period of emitter

λ  = 3.00E8 m/s * 1 / 2.40E10 = .0125 m    

λ emitted by speed gun = .0125 m

But gun moves Vg * T     between wavefronts

λ' = λ - Vg T where λ' is wavelength received by stationary observer

One can calculate T' from 3.00E8 m/s the period seen by observer, that is the period measured by the observer is the speed of light divided by the wavelength received by the observer

Now if the observer is moving the wavelength observed by the observer is λ'' = λ'  - Vo T' since the observer will move a distance Vo T' between receiving wavefronts (T' has been calculated)

That is, the waves received by the tennis ball are shortened because of the motion of the tennis ball.

The  speed of the wave measured is always 3.00E8 m/s

Answer:

This is because if the electric field is not perpendicular to the equipotential surface there would have existed some nonzero component along the surface.

The total energy of the system would be the same regardless of the mass of the object. This is because the energy stored in a spring is a function of the displacement of the spring, and not the mass of the object.

Energy is the capacity to do work. It is the ability to cause change and can take many forms, such as kinetic, potential, thermal, chemical, electrical, nuclear, and gravitational energy. It is essential for life and is found in all parts of nature. Energy is used to power machines, create materials, and to generate electricity. It is also used to heat and cool buildings, to light homes, and to power vehicles. As energy is used, it is converted into another form, such as heat, light, or sound. While energy can be used up, it is never destroyed. It is always transferred or transformed.

To learn more about energy

https://brainly.com/question/2003548

#SPJ4

Initial speed, u = 72 km/h

Initial speed, u = 72 km/hFinal speed, v = 0 km/h (since the car comes to rest)

Initial speed, u = 72 km/hFinal speed, v = 0 km/h (since the car comes to rest)Time, t = 25 s

Formula:

Formula:The acceleration of an object can be calculated using the formula:

[tex]a = \frac{(v - u)}{t} [/tex]

Where a is the acceleration, v is the final velocity, u is the initial velocity, and t is the time taken.

Converting the initial velocity to m/s:

u = 72 km/h = (72 × 1000) / (60 × 60) = 20 m/s

Converting the final velocity to m/s:

v = 0 km/h = (0 × 1000) / (60 × 60) = 0 m/s

Substituting the values in the formula:

a = (v - u) / t

a = (0 - 20) / 25

a = -0.8 m/s² (Note: the negative sign indicates that the car is decelerating)

[tex] PLEASE :\ MARK :\ ME :\ AS :\ BRAINLIEST [/tex]

The proposed fluid mechanics problem requires more information to compute the pressure in pipe B and the pressure head at Point C.

We must use the hydrostatic equation, the continuity equation, and the information about the specific gravity and pressure gauge reading provided in order to calculate for the pressure in pipe B and the pressure head at the top of the dome (Point C).

It is impossible to offer a conclusive solution to this issue without more details. The size of the tank and piping system, the height difference between various places, and the precise location and orientation of the pressure gauge are all details that would be necessary for a thorough estimate.

For this reason, further information is needed in order to solve the issue and determine the values for the pressure in pipe B and the pressure head at Point C.

Learn more about fluid mechanics here:

https://brainly.com/question/29627077

#SPJ4

full question

A closed cylindrical tank filled with water has an hemispherical dome and is connected to an inverted piping system as shown in the figure. The liquid on the top part of the piping system has a specific gravity of .8 and the remaining parts of the system are filled with water. If the pressure gage reading at A is 60kPa determine.
- The pressure in pipe B
- The pressure head at the top of the dome (Point C)

The five points of architecture by Le Corbusier are Pilotis, Free plan, Free facade, Ribbon windows and Roof terrace

The five points of architecture are:

Pilotis: These are reinforced concrete columns that elevate the structure off the ground. The use of pilotis allows for the ground floor to be free of structural elements, enabling flexible use of space and increased light and ventilation.

Free plan: The use of pilotis allows for the creation of an open, free plan that is unconstrained by load-bearing walls. This enables architects to design flexible interior spaces that can be easily reconfigured.

Free facade: The use of pilotis and a free plan allows for the creation of a free facade, which means that the exterior walls are not load-bearing and can be designed purely for aesthetic purposes. This enables architects to experiment with new materials and forms.

Ribbon windows: Continuous bands of windows along the facade, or ribbon windows, enable natural light to penetrate deep into the interior of the building. This allows for a more comfortable and healthy living environment.

Roof terrace: The fifth point of architecture is the inclusion of a roof terrace, which provides additional outdoor space and can be used for a variety of purposes, including gardening and recreation

Learn more about architecture here

brainly.com/question/29418302

#SPJ4

Activation energy is best defined as the energy that "must be supplied to a chemical reaction to initiate or start it".

It is the minimum amount of energy that reactant molecules must possess to overcome the energy barrier and reach the transition state, where new bonds can form and products can be generated. The magnitude of the activation energy determines the rate of the chemical reaction. Higher activation energy means that fewer reactant molecules possess the necessary energy to reach the transition state, leading to slower reaction rates. Lower activation energy allows more molecules to overcome the energy barrier, leading to faster reaction rates. Catalysts can lower the activation energy of a reaction by providing an alternative pathway with a lower energy barrier, increasing the rate of the reaction.

You can learn more about activation energy at

https://brainly.com/question/1380484

#SPJ4

The correct answer is Mona has done 2 times as much work done as Samir i.e. option A is correct.

The work done to compress a spring by a distance x is given by the formula:

W = (1/2) kx²

where k is the spring constant.

Therefore, the work done by Samir to compress his spring by a distance x is:

W1 = (1/2) kx²

The work done by Mona to compress her spring by a distance 2x is:

W2 = (1/2) k(2x)² = (1/2) k(4x²) = 2(1/2) kx² = kx²

Therefore, the ratio of the work done by Mona to the work done by Samir is:

W2/W1 = (kx²)/[(1/2) kx²] = 2

So, Mona has done 2 times as much work as Samir.

Therefore, the correct answer is A. Mona has done 2 times work as much as done by Samir.

Learn more about Work done :

https://brainly.com/question/16976412

#SPJ4

The net torque about the pivot is -0.6Nm

Torque is defined as the perpendicular component of force \times distance from pivot point.

#Tnet = £Ti where £Ti is the torques from different applied forces.

T1 = 6N × 1.2 = 7.2N  (+ve, counterclockwise)

T2= -5.2N sin 30° 3m (-ve, clockwise)

= -7.8Nm

Tnet = T1+ T2

= 7.2-7.8

= - 0.6Nm

Hence, the total torque is -0.6Nm

What is torque?

To know more about torque, click the link given below:

https://brainly.com/question/30338175

#SPJ4

The correct option is C, Copernicus Said That T He Rotation Of The Earth On Its Axis Caused the Retrograde Motion Of The Planets.

The correct option is B, In Comparison to the Copernican Theory, The Ptolemaic Theory Made Predictions that were of much less accuracy.

Retrograde motion is the apparent backward motion of a planet in its orbit, as viewed from Earth. This phenomenon occurs as a result of the relative positions of Earth and the planet in question, as both planets move in their orbits around the Sun. Retrograde motion is an illusion, as it is not actually caused by any change in the planet's direction or speed of travel. Instead, it is due to the difference in the length of time it takes for Earth and the other planet to complete their orbits around the Sun.

During retrograde motion, the planet appears to move backwards against the backdrop of the stars for a period of weeks or months. This phenomenon was first observed by ancient astronomers, who were puzzled by the strange behavior of the planets in the sky. Today, retrograde motion is well understood and can be predicted with a high degree of accuracy.

To learn more about Retrograde Motion visit here:

brainly.com/question/29823621

#SPJ4

Complete Question: -

Copernicus Said That T He Rotation Of The Earth On Its Axis Caused the

A. Daily Motions In The Heavens. B Phases Of The Moon. C. Retrograde Motion Of The Planets D. Eclipses Of The Moon. E. Motion Of The Sun Along The Ecliptic.

In Comparison To The Copernican Theory, The Ptolemaic Theory Made Predictions That Were Of

A. Much Higher Accuracy  B. much less accuracy C. about the same accuracy

The de Broglie wavelength of the bullet is 2.65 x 10^-34 m.

Wavelength is a measure of the distance between two consecutive points of a wave. It is a physical quantity that is related to the frequency of a wave, where the frequency is the number of waves passing a given point in a given time period, usually measured as cycles per second or hertz. Wavelength is usually measured in meters, centimeters, or nanometers.

The de Broglie wavelength of a particle with mass m and velocity v is given by the equation; λ = h/mv where h is Planck's constant.
To calculate the de Broglie wavelength of the bullet, we first need to convert the mass of 25g to kilograms. This can be done by multiplying the mass by 0.001.
Therefore, the mass of the bullet is 0.025 kg.
Using the equation above, we can calculate the de Broglie wavelength of the bullet by substituting the values in the equation.
λ = (6.626*10^-34 Js)/(0.025 kg * 100 m/s)
λ = 2.65 x 10^-34 m
Therefore, the de Broglie wavelength of the bullet is 2.65 x 10^-34 m.

To learn more about wavelength
https://brainly.com/question/10728818
#SPJ4

The de Broglie wavelength of the bullet is[tex]2.65 \times 10^{-34} m.[/tex]

Wavelength is a measure of the distance between two consecutive points of a wave. It is a physical quantity that is related to the frequency of a wave, where the frequency is the number of waves passing a given point in a given time period, usually measured as cycles per second or hertz. Wavelength is usually measured in meters, centimeters, or nanometers.

The de Broglie wavelength of a particle with mass m and velocity v is given by the equation; λ = h/mv where h is Planck's constant.

To calculate the de Broglie wavelength of the bullet, we first need to convert the mass of 25g to kilograms. This can be done by multiplying the mass by 0.001.

Therefore, the mass of the bullet is 0.025 kg.

Using the equation above, we can calculate the de Broglie wavelength of the bullet by substituting the values in the equation.

[tex]\lambda =\frac{ (6.626\times 10^{-34} Js)}{(0.025 kg \times 100 m/s)} \\\lambda = 2.65 \times 10^{-34} m[/tex]

Therefore, the de Broglie wavelength of the bullet is[tex]2.65 \times 10^{-34} m.[/tex]

To learn more about wavelength

brainly.com/question/10728818

#SPJ4

The electric field created by sphere A will be much greater than the electric field created by sphere B because sphere A has a much higher surface charge density.

The magnitudes of the electric fields created by the two spheres at a radius of 4 cm will be different because they have different charge distributions.

A good conductor, such as sphere A, will distribute its charge evenly over its surface, so the electric field it creates will be proportional to the surface charge density. On the other hand, an insulator, such as sphere B, will have a uniform charge distribution throughout its volume, so the electric field it creates will be proportional to the volume charge density.

The electric field created by a charged sphere at a point outside the sphere can be calculated using the formula:

E = [tex]\mathrm{k \times Q / r^2}[/tex]

where k is the Coulomb constant, Q is the charge on the sphere, and r is the distance from the center of the sphere to the point where the electric field is being calculated.

Using this formula, we can calculate the electric field created by each of the spheres at a radius of 4 cm:

For sphere A:

[tex]\mathrm{E = k \times Q / (r^2) = k \times (2 x 10^-6) / (4^2 x 10^-2)^2 = k \times 2 / 16}[/tex]

For sphere B:

[tex]\mathrm{E = k \times Q / (4r)^2 = k \times (2 x 10^-6) / (4 x 5 x 10^-2)^2 = k \times 2 / 100}[/tex]

To know more about electric field, visit:

https://brainly.com/question/15800304

#SPJ4

To solve this problem we will use the concepts related to angular motion equations. Therefore we will have that the angular acceleration will be equivalent to the change in the angular velocity per unit of time.

Angular acceleration is the rate of change of angular velocity over time. It is a vector quantity, with both magnitude and direction, and is usually measured in radians per second squared (rad/[tex]s^{2}[/tex]).

We will use the relationship between linear velocity, radius, and angular velocity to find said angular velocity and use it in the mathematical expression of angular acceleration.

The average angular acceleration

a = wf-wi/t

Here

a = Angular acceleration

Wf, Wi Initial, and final angular velocity

There is no initial angular velocity, then

a = Wf/t

We know that the relation between the tangential velocity with the angular velocity is given by,

v = rw

Here,

r = Radius

w = Angular velocity,

Rearranging to find the angular velocity

w = v/r

Remember that the radius is half the diameter.

Now replacing this expression in the first equation we have,

a= 30/ 0.20×6

a= 25 rad/s²

Therefore the average angular acceleration of each wheel is 25 rad/s²

To know more about velocity, click the link given below:

brainly.com/question/17127206

#SPJ4

he energy conversion taking place as protons move through ATP synthase is the conversion of proton motive force into chemical energy in the form of ATP.

When protons move through ATP synthase, they drive the rotation of a subunit called the rotor. This rotation is then transmitted to a subunit called the stator, which catalyzes the synthesis of ATP from ADP and inorganic phosphate. This process is known as oxidative phosphorylation and is a key step in cellular respiration.

The movement of protons through ATP synthase is driven by the electrochemical gradient established across the inner mitochondrial membrane. This gradient is created by the transfer of electrons through the electron transport chain, which ultimately leads to the production of ATP.

To know more about the energy conversion, here

brainly.com/question/8427473

#SPJ4

The statement that best compares the momentum of a stationary truck and a car in motion is as follows:

Momentum may be defined as the quantity of motion of the body. It represents the object which is under the condition of movement or motion.

It is calculated by “mass × velocity”, as momentum relies upon velocity, and it depends on the direction of the motion of the body as well. Momentum is a vector quantity since velocity is a vector while mass is scalar. Its SI unit is kg m /s.

The car is consistently moving so it has mass and velocity both. While on contrary, a stationary truck is not moving, so it has not any type of mass or velocity. Due to this, its momentum is zero.

To learn more about Momentum, refer to the link:

https://brainly.com/question/1042017

#SPJ9

Your question seems incomplete. The most probably the complete question is as follows:

Which statement best compares the momentum of a stationary truck and a car in motion?

Each different signal in a 1H NMR spectrum represents a different type of hydrogen atom. Hydrogen atoms that are equivalent give the same signal.

In physics, the term "spectrum" refers to the variation in light intensity with wavelength or frequency. A spectroscope is a device created for visual spectral observation, while a spectrograph is a device that captures or maps spectra. Spectra can be categorized based on their types of origin, such as emission or absorption. All the radiations that are emitted by atoms or molecules make up an emission spectrum, whereas, in an absorption spectrum, some wavelengths of a continuous spectrum (light that contains all wavelengths) are absent because they have been absorbed by the medium through which the light has passed; these absent wavelengths are visible as dark lines or gaps.

To know more about spectrum, check out:

https://brainly.com/question/30138070

#SPJ4

Refraction results from differences in light's speed. The correct answer is C) speed.

Refraction is the term for the bending of light as it passes through transparent materials (it also occurs with sound, water, and other waves). We are able to create lenses, magnifying glasses, prisms, and rainbows because to this bending caused by refraction.

Refraction occurs when light passes through different mediums and changes its speed. This change in speed causes the light to bend, creating the effect of refraction.

This is why objects appear to be in different positions when viewed through water or a lens. The frequency and incident angles of the light do not affect refraction, only the speed of the light does.

To know more about Refraction here:

https://brainly.com/question/14760207#

#SPJ11

From the way that lunar eclipses manifest, the ancient Greeks had been able to calculate the distance from the Earth to the Moon.

Lunar eclipses occur when the Earth's shadow falls on the Moon, blocking its light. During a total lunar eclipse, the Moon appears red, which is often referred to as a "blood moon". This is because the Earth's atmosphere refracts sunlight, filtering out blue light and casting the Moon in a red hue.

Lunar eclipses occur several times a year, but not all of them are total. Sometimes the Moon only passes through the partial shadow of the Earth, resulting in a partial lunar eclipse. These eclipses can be more difficult to see since the Moon doesn't become as dark or as red. Lunar eclipses have been observed and recorded by humans for thousands of years, and they continue to be a fascinating and awe-inspiring natural phenomenon.

To learn more about Lunar eclipses visit here:

brainly.com/question/22420223

#SPJ4

In general, the most prevalent ways of electrical wire bonding are:

Soldering, Wire nuts, Crimping, Terminal blocks, Heat shrink tubing.

Soldering is the process of melting a metal alloy, such as tin or lead, onto wires to form a permanent, low-resistance link. Soldering is frequently used to join fragile or thin wires.

Wire nuts are twist-on connectors that are often used for connecting wires. They are available in a variety of sizes to accommodate various wire gauges and may be quickly removed if necessary.

Crimping is the process of pressing a metal connection onto a wire using a specific tool to produce a strong bond. This technique is frequently utilised in automotive and maritime applications.

Terminal blocks are used to join together many wires. They are made up of a metal strip and screws that keep the wires in place.

Heat shrink tubing is a form of plastic tubing that contracts when heated. It is useful for insulating and protecting splices and connectors.

For more such questions on electrical wire, click on:

https://brainly.com/question/14311319

#SPJ4

The ionization nebula would expected in the halo. (option A)

However, there are some locations in a galaxy where ionization nebulae are less likely to be found.

Similarly, in the disk of a galaxy, ionization nebulae are more common but may be less frequent in some areas due to variations in the density of gas and the distribution of hot stars.

By taking into account the density of gas and dust, the temperature and luminosity of hot stars, and other factors, scientists can predict where ionization nebulae are most likely to be found and how their distribution may vary across different types of galaxies.

In summary, while ionization nebulae are most commonly found in regions of active star formation, there are some locations in a galaxy where they are less likely to be found, such as in the halo or in areas with lower levels of gas and dust.

To know more about nebula here

https://brainly.com/question/9497068

#SPJ4

Answer: a c

Explanation:

When a substance lose an electron, it becomes positively charged. The dust particle will acquire positive charge when it losses electrons when it passes through the positively charged grid.

An atom contains equal number of electrons and protons. Hence, it possess no net charge and being neutral. When the atom lose or gain electrons it becomes ions.

When the atom lose one electron its number of protons dominates over that of electrons and it acquires a positive charge. When the atom gain an electron the reverse happen and it acquires a negative charge.

Here, the dust particle loses its electron to the positive grid thus it will gain a positive charge.  

Find more on charged particles:

https://brainly.com/question/12531313

#SPJ9

A mechanical device known as a catapult launches a projectile using stored energy and the forces which works on it are gravity, air resistance, and friction are among the more significant forces.

Both internal and exterior forces can be used to describe the forces operating on a catapult. The catapult's structure, including the tension in the ropes or the compression in the springs, produces internal forces.

The external forces are those that exert external pressure on the catapult, such as the projectile's mass and the wind's force. The tension in the ropes, which supplies the energy needed to propel the projectile, is the most significant force operating on a catapult.

Learn more about the force at

https://brainly.com/question/28638862

#SPJ4

Option B. Mechanical waves require a medium for propagation, while electromagnetic waves do not.

Mechanical waves are waves that require a medium to travel through. Examples of mechanical waves include sound waves and water waves. In these waves, energy is transferred through the medium by the particles in the medium oscillating back and forth. Mechanical waves have properties such as amplitude, wavelength, frequency, and speed. They can also have crests and troughs, like ocean waves, but this is not the most fundamental property that distinguishes them from electromagnetic waves.

Electromagnetic waves, on the other hand, do not require a medium to travel through. They can travel through a vacuum, such as the vacuum of space. Examples of electromagnetic waves include radio waves, microwaves, infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays. Electromagnetic waves have properties such as wavelength, frequency, and speed, but they do not have crests and troughs like mechanical waves.

Therefore, the property that most fundamentally distinguishes mechanical waves from electromagnetic waves is that mechanical waves require a medium for propagation.

Learn more about mechanical waves here: brainly.com/question/24459019

#SPJ4

A combining form for lungs is  "pneum/o".

In medical terminology, a combining form is a word part that is added to the beginning or end of a root word to modify its meaning. The combining form "pneum/o" is used to refer to the lungs, air, or respiration.

Some common medical terms that use the combining form "pneum/o" include:

Pneumonia: An infection of the lungs that can cause inflammation, coughing, and difficulty breathing.

Pneumothorax: A condition in which air leaks into the space between the lung and chest wall, causing the lung to collapse.

Pneumonectomy: A surgical procedure in which one or more lobes of the lung are removed.

Pneumology: The study of the lungs and respiratory system.

Learn more about combining form here: https://brainly.com/question/3124757

#SPJ1

The temperature of 96 F in Celsius is 35.56 C

The physical concept of temperature indicates in numerical form how hot or cold something is. A thermometer is used to determine temperature.

The temperature conversion from Fahrenheit to Celsius can be done using the following formula: C = (F - 32) * 5/9, where C is the temperature in Celsius and F is the temperature in Fahrenheit.

To find the temperature in Celsius when given the temperature in Fahrenheit, we can plug in the given value of F into the formula and solve for C.

In this case, F = 96.

C = (96 - 32) * 5/9
C = 64 * 5/9
C = 35.56

Therefore, the temperature of 96 F in Celsius is 35.56 C.

TO know more about temperature conversion here:

https://brainly.com/question/13421795#

#SPJ11

Significant destruction of forest habitat will increase : carbon dioxide.

When forests are cut down, much of stored carbon is released into the atmosphere as carbon dioxide (CO₂) and this is how deforestation and forest degradation contribute to global warming.

Forests and trees store carbon  and when they are degraded or completely cleared (a process referred to as deforestation), this stored carbon has the potential to be released back into atmosphere as carbon dioxide  and thus contribute to climate change.

Burning fossil fuels, in combination with destruction of carbon sinks due to deforestation and other activities contributes to more and more carbon dioxide building up in the atmosphere.

To know more about atmosphere, refer

https://brainly.com/question/30157320

#SPJ4