what is a divided by 6 -11=25

(a) Solving initial value problem, P(t) = (1/k) [(kPo + M)e^(kt) - M]

(b)To keep P(t) constant and equal to Po, k must be negative and M must be positive.

(a) To solve the initial value problem:

dP/dt = kP + M, P(0) = Po

We can rewrite the differential equation as:

dP/(kP + M) = dt

Integrating both sides, we get:

(1/k) ln|kP + M| = t + C

where C is a constant of integration. Solving for P, we get:

P(t) = (1/k) (e^(k(t+C)) - M/k)

To find the value of C, we use the initial condition P(0) = Po:

Po = (1/k) (e^(kC) - M/k)

Solving for C, we get:

C = (1/k) ln(kPo + M) - (1/k) ln|kPo|

Substituting this back into the expression for P(t), we get:

P(t) = (1/k) [(kPo + M)e^(kt) - M]

(b) To determine the conditions under which P(t) remains constant and equal to Po, we set P(t) = Po and solve for k and M:

Po = (1/k) [(kPo + M)e^(kt) - M]

Simplifying and rearranging, we get:

(k - 1)e^(kt) = M/Po

If k = 1, then we get 0 = M/Po, which is impossible unless M = 0 (i.e., there is no migration). Therefore, we assume k ≠ 1.

Taking the natural logarithm of both sides, we get:

kt + ln(k - 1) = ln(M/Po)

Solving for k, we get:

k = [ln(M/Po) - ln(k - 1)]/t

To keep P(t) constant and equal to Po, k must be negative (i.e., P(t) is decreasing) and M must be positive (i.e., there is net migration into the population). Physically, this makes sense because if the migration rate is positive, then more individuals are entering the population than leaving, which will tend to increase the population size. Conversely, if the growth rate k is negative, then the population is decreasing in the absence of migration, so the positive migration rate can counteract this decrease and maintain a constant population size.

To learn more about constant here:

https://brainly.com/question/30579390

#SPJ4

I got this answer off of

The difference in the areas of the pizza pies will be 40.82 square inches.

It is the close curve of an equidistant point drawn from the center. The radius of a circle is the distance between the center and the circumference.

Let d be the diameter of the circle. Then the area of the circle will be

A = (π/4)d² square units

Then the difference in the areas of the pizza pies is given as,

A = (π/4) {14² - 12²}

A = (3.14 / 4) x (196 - 144)

A = 0.785 x 52

A = 40.82 square inches

The difference in the areas of the pizza pies will be 40.82 square inches.

More about the area of a circle link is given below.

https://brainly.com/question/11952845

#SPJ1

Multiply 84,000 by 0.6 thus the answer is 50,400

The Fraction 9/18 should be multiplied by 1/4 to get the value Equivalent to 9/18 ÷ 2.

The fractional bar is a horizontal bar that divides the numerator and denominator of every fraction into these two halves.

We have to solve,

9/18 ÷ 2

As, Fraction does not support the division as usually number does.

So, we have to perform the multiplication by reciprocating the number,

9/18 x 1/2

= 9/ 36

= 1/4

Learn more about fraction here:

https://brainly.com/question/19634536

#SPJ9

For the probability mass function given for certain computer program answer of the following questions are:

a. Probability of the computer malfunction more than 3 times is 0.11.

b. Value of E(X) = 2.03  ,  E(X²)  = 3.91 , V(X) = -0.2109

Probability of the computer program that malfunction more than 3 times

= p(4) + p(5)

= 0.08 + 0.03

= 0.11

E(X) = ∑x p(x)

      = (0)(0.05)  + (1) (0.28) + (2)(0.4)+(3)(0.16) + (4)(0.08) + (5)(0.03)

      = 0 + 0.28 + 0.8 + 0.48 + 0.32 + 0.15

      = 2.03

E(X²) = ∑x² p(x)

      = (0)²(0.05)  + (1)² (0.28) + (2)²(0.4)+(3)²(0.16) + (4)²(0.08) + (5)²(0.03)

      = 0 + 0.28 + 0.16 + 1.44 + 1.28 + 0.75

      =3.91

Var(X)

= V(x)

= E(X²) - [E(X) ]²

= 3.91 - (2.03)²

= 3.91 - 4.1209

= -0.2109

Therefore, the answer of the following as per given data are:

a. Required probability = 0.11

b. E(X) = 2.03  ,  E(X²)  = 3.91 , V(X) = -0.2109

Learn more about probability here

brainly.com/question/30034780

#SPJ4

Answer:

10 1/4

Step-by-step explanation:

Answer: The system of differential equations can be rewritten as a matrix equation:

[x', y']^T = [-4y, -6x]^T

The characteristic equation is obtained by setting the determinant of the matrix [A - λI] equal to 0, where A is the coefficient matrix, λ is an eigenvalue, and I is the identity matrix:

det([A - λI]) = det([-λ -4y; -6x, -λ]) = λ^2 + 24 = 0

Thus, λ = ±2i√6. The general solution to the system is then given by:

x(t) = c1cos(2√6t) + c2sin(2√6t)

y(t) = -2c1sin(2√6t) + 2c2cos(2√6t)

where c1 and c2 are constants determined by the initial conditions. Using the initial condition x(0) = -2, y(0) = -2, we can solve for c1 and c2:

-2 = c1cos(0) + c2sin(0)

-2 = -2c1sin(0) + 2c2cos(0)

c1 = -2

c2 = -2

So the particular solution to the system is:

x(t) = -2cos(2√6t) - 2sin(2√6t)

y(t) = 4sin(2√6t) - 4cos(2√6t)

The critical point (0,0) is a center, as the solution spirals towards the origin as t increases.

Step-by-step explanation:

We would expect approximately 132 flowers in the batch to not have eight petals.

If the probability of a flower having eight petals is 0.45, then the probability of a flower not having eight petals is 1 - 0.45 = 0.55.

So, for we to find the expected number of flowers that do not have eight petals in a randomly selected batch of 240 flowers, we have to multiply the total number of flowers (240) by the probability of a flower not having eight petals (0.55):

Expected number of flowers without eight petals = 240 × 0.55

Expected number of flowers without eight petals = 132

Therefore, we would expect approximately 132 flowers in the batch to not have eight petals.

Learn more about probability from

https://brainly.com/question/24756209

#SPJ1

Answer:3/4

Step-by-step explanation:Cho used 5/2

She used 13/4 to bake a loaf.

How much more is 13/4-5/2

=13-10/4

=3/4

Hope it helps!

When using fact-finding techniques, asking what is being done is the same as asking what could or should be done is a false statement.

Fact-finding is a process that helps in

discovering facts, cues, or other valid details regarding a specific case or a situation. It refers to the gathering of information. It is often part of an initial mission, i.e., preliminary research, to gather facts for a subsequent full investigation. Accurate information can be collected with help of certain methods/ techniques. These specific methods for finding information of the system are termed as fact finding techniques. Interview, Questionnaire, Record View and Observations are the different fact finding techniques used by the analyst. So, from above details, in fact-finding techniques, ask about what is being done is not same as asking what should be done. Thus, it is false statement.

To learn more about fact-finding techniques, visit :

https://brainly.com/question/14852724

#SPJ4

Answer:

y

a= ——

(r + 1 )t

Step-by-step explanation:

divide both sides

Answer:

[tex]\boxed{\begin{minipage}{7cm}\\b) a4, b3, c3, d1 is the correct answer. why? B is only missing 50 percent and c only has 10 percent and finally only missing 20 percent a d\end{minipage}}\\\\\\\boxed{\begin{minipage}{7cm}\\Therfore, the correct answer is b) a4, b3, c3, d1. \end{minipage}}[/tex]

We can write the given statement as algebraic expression as -

3(1 + p).

Given is the mathematical statement as -

“ 3 times the quantity 1 plus p ”.

We can write the algebraic expression as -

3(1 + p)

Therefore, we can write the given statement as expression as -

3(1 + p).

To solve more questions on functions & expressions, visit the link -

https://brainly.com/question/30098550

#SPJ1

Answer: The equation that represents this proportional relationship is D: 2/3w = 2h.

To find the average rate of change of a function on a given interval, we can calculate the difference between the values of the function at the endpoints of the interval, and divide it by the difference between the values of the independent variable (in this case x) at the endpoints of the interval.

For the function y = 1/x on the interval [1, 3], we can use this method to find the average rate of change:

y(3) - y(1) = 1/3 - 1 = -2/3

x(3) - x(1) = 3 - 1 = 2

Average rate of change = (y(3) - y(1)) / (x(3) - x(1)) = (-2/3) / 2 = -1/3

So, the average rate of change of the function y = 1/x on the interval [1, 3] is -1/3.

Step-by-step explanation:

1 meter = 1.094 yard create a conversion factor to convert meters to yards.

Any instrument that detects and may store an electric or magnetic amount, such voltage or current, is referred to as a meter. Examples of meters include an ammeter and a voltmeter. One may refer to using this kind of device as "metering" or one could state that the volume being measured is now being "metered".

The yard (symbol: yd) is just an English unit of length that is equal to 3 feet or 36 inches according to the British imperial and American customary systems of measurement. According to an international agreement, it has been exactly regulated to 0.9144 metres since 1959. precise 0.9144 meters. One mile is 1,760 yards in length. One mile is 1,760 yards in length.

Given

[tex]1 yard=0.914 meter[/tex]

Create a convert meter to yard expression

[tex]1 yard=0.914 meter[/tex]

Divide both side by 0.914

[tex]\frac{1yard}{0.914} =\frac{0.914 meter}{0.914}[/tex]

[tex]\frac{1 yard}{0.914}= 1meter[/tex]

[tex]1.09409190372=1meter[/tex]

[tex]1meter=1.09409190372 yard[/tex]

[tex]1meter = 1.094 yard[/tex] Approx.

To know more about yard and meter visit:

https://brainly.com/question/20699213

#SPJ1

Step-by-step explanation:

this is a college question ? oh, my ...

the area of a rectangle is

length × width

the 2 walls are 2 rectangles.

15 3/4 × 10

13 1/2 × 10

to be sure, let's convert both mixed numbers to full fractions :

15 3/4 = (15×4 + 3)/4 = 63/4

13 1/2 = (13×2 + 1)/2 = 27/2

so, the areas are

63/4 × 10 = 630/4 = 315/2 ft²

27/2 × 10 = 270/2 ft²

in total that is

315/2 + 270/2 = 585/2 = (584/2 + 1)/2 = 272 1/2 ft²

The area of a square with side length 2 inches greater than the area of a circle with radius 1.2 inches.

Area is the entire amount of space occupied by a flat (2-D) surface or an object's shape. The area of a plane figure is the area that its perimeter encloses. The quantity of unit squares that cover a closed figure's surface is its area.

Given:

Area of Square = side x side

we have side = 2 inches

So, Area of Square = side x side

                                = 2 x 2

                                = 4 inch²

and, Area of Circle = πr²

We have radius = 1.2 inch

So, Area of Circle = 3.14 x (1.2)²

                              = 4.5216 inch²

So, Area of Square is greater than Area of Circle.

Learn more about Function here:

https://brainly.com/question/20680662

#SPJ9

46.53 is the Trimmed mean after removing, 20% of the trimmed mean from all the given lengths of 3-Point Kick for NCAA Division 1-A Football.

The given data is:

Lengths of 3-point kicks = 30 32 34 40 41 43 43 44 45 45 46 47 52 51 53 56 56 57 60.

Trimmed mean = 20%

The trimmed mean is defined as the statistical measure of central tendency. That means calculating the mean value of the given tendency of observations.

Trimmed observations = 20 x (20/100) = 4

These, trimmed observations denote that 2 observations must be trimmed from both sides when they are arranged in ascending order.

Ascending order of lengths =  30 32 34 40 41 43 43 44 45 45 46 47 51 52 53 56 56 57 60.

The trimmed Mean =  (34 40 41 43 43 44 45 45 46 47 51 52 53 56 56)/ 15

Trimmed mean = 698/15 = 46.53

Therefore, we can conclude that 46.53 is the Trimmed Mean after removing, 20% of the trimmed mean.

Learn more about Trimmed Mean:

brainly.com/question/14586610

#SPJ4

The following are the vector equations as a matrix equation.

(a)[tex]& \Rightarrow\left[\begin{array}{ccc}3 & 7 & -2 \\-2 & 3 & 1\end{array}\right]\left[\begin{array}{l}x_1 \\x_2 \\x_3\end{array}\right]=\left[\begin{array}{c}1 \\-1\end{array}\right][/tex]

[tex]$A=\left[\begin{array}{ccc}3 & 7 & -2 \\ -2 & 3 & 1\end{array}\right][/tex] , [tex]x=\left[\begin{array}{l}x_1 \\ x_2 \\ x_3\end{array}\right]$[/tex] [tex]$b=\left[\begin{array}{c}1 \\ -1\end{array}\right]$[/tex]

(b) [tex]$\Rightarrow\left[\begin{array}{cc}3 & 5 \\ -2 & 0 \\ 8 & 9\end{array}\right]\left[\begin{array}{c}x_1 \\ x_2\end{array}\right]=\left[\begin{array}{c}2 \\ -3 \\ 8\end{array}\right]$[/tex]

[tex]$A=\left[\begin{array}{cc}3 & 5 \\ -2 & 0 \\ 8 & 9\end{array}\right][/tex], [tex]x = \left[\begin{array}{l}x_1 \\ x_2\end{array}\right]$[/tex] [tex]$b=\left[\begin{array}{c}2 \\ -3 \\ 8\end{array}\right]$[/tex]

(c) [tex]$\Rightarrow\left[\begin{array}{cc}3 & 5 \\ -2 & 0 \\ 8 & 9\end{array}\right]\left[\begin{array}{c}x_1 \\ x_2\end{array}\right]=\left[\begin{array}{c}2 \\ -3 \\ 8\end{array}\right]$[/tex]

[tex]$A=\left[\begin{array}{cc}3 & 5 \\ -2 & 0 \\ 8 & 9\end{array}\right][/tex], [tex]x = \left[\begin{array}{l}x_1 \\ x_2\end{array}\right]$[/tex] [tex]$b=\left[\begin{array}{c}2 \\ -3 \\ 8\end{array}\right]$[/tex]

(d) [tex]& \Rightarrow\left[\begin{array}{ccc}1 & 1-2 & 1 \\0 & 2 & -8 \\-4 & 5 & 9\end{array}\right]\left[\begin{array}{l}x_1 \\x_2 \\x_3\end{array}\right]=\left[\begin{array}{c}0 \\8 \\-9\end{array}\right][/tex]

[tex]A=\left[\begin{array}{ccc}1 & 1-2 & 1 \\0 & 2 & -8 \\-4 & 5 & 9\end{array}\right], x=\left[\begin{array}{l}x_1 \\x_2 \\x_3\end{array}\right] x[/tex] [tex]b=\left[\begin{array}{c}0 \\8 \\-9\end{array}\right] \\[/tex]

As per the given data here we have to determine each of the following vector equations as a matrix equation.

That means we have write them in the form of matrix equation that is in the form of Ax = b

a)

[tex]3 x_1+7 x_2-2 x_3=1 \\[/tex]

[tex]-2 x_1+3 x_2+1 x_3=-1[/tex]

Write the equations in the matrix form

[tex]& \Rightarrow\left[\begin{array}{ccc}3 & 7 & -2 \\-2 & 3 & 1\end{array}\right]\left[\begin{array}{l}x_1 \\x_2 \\x_3\end{array}\right]=\left[\begin{array}{c}1 \\-1\end{array}\right][/tex]

This is in the form of  Ax = b .

Here, [tex]$A=\left[\begin{array}{ccc}3 & 7 & -2 \\ -2 & 3 & 1\end{array}\right][/tex] , [tex]x=\left[\begin{array}{l}x_1 \\ x_2 \\ x_3\end{array}\right]$[/tex] and [tex]$b=\left[\begin{array}{c}1 \\ -1\end{array}\right]$[/tex]

b)

[tex]& 3 x_1+5 x_2=2 \\[/tex]

[tex]& -2 x_1+0 x_2=-3 \\[/tex]

[tex]& 8 x_1+9 x_2=8[/tex]

Write the equations in the matrix form

[tex]$\Rightarrow\left[\begin{array}{cc}3 & 5 \\ -2 & 0 \\ 8 & 9\end{array}\right]\left[\begin{array}{c}x_1 \\ x_2\end{array}\right]=\left[\begin{array}{c}2 \\ -3 \\ 8\end{array}\right]$[/tex]

This is in the form of Ax = b.

Here, [tex]$A=\left[\begin{array}{cc}3 & 5 \\ -2 & 0 \\ 8 & 9\end{array}\right][/tex], [tex]x = \left[\begin{array}{l}x_1 \\ x_2\end{array}\right]$[/tex] and [tex]$b=\left[\begin{array}{c}2 \\ -3 \\ 8\end{array}\right]$[/tex]

(c)

[tex]& x_1-3 x_2+5 x_3=1 \\[/tex]

[tex]& -x_2+3 x_4=7 \\[/tex]

[tex]& \Rightarrow 0 x_1-x_2+0 x_3+3 x_4=7 \\[/tex]

Write the equations in the matrix form

[tex]& \Rightarrow\left[\begin{array}{llll}1 & -3 & 5 & 0 \\0 & -1 & 0 & 3\end{array}\right]\left[\begin{array}{l}x_1 \\x_2 \\x_3 \\x_4\end{array}\right]=\left[\begin{array}{l}1 \\7\end{array}\right][/tex]

This is in the form of Ax = b

Here, [tex]} A=\left[\begin{array}{llll}1 & -3 & 5 & 0 \\0 & -1 & 0 & 3\end{array}\right], x=\left[\begin{array}{l}x_1 \\x_2 \\x_3 \\x_4\end{array}\right][/tex] and [tex]b=\left[\begin{array}{l}1 \\7\end{array}\right] \\&\end{aligned}$$[/tex]

d)

[tex]& x_1-2 x_2+x_3=0 \\[/tex]

[tex]& 2 x_2-8 x_3=8 \\[/tex]

[tex]& -4 x_1+5 x_2+9 x_3=-9 \\[/tex]

Write the equations in the matrix form

[tex]& \Rightarrow\left[\begin{array}{ccc}1 & 1-2 & 1 \\0 & 2 & -8 \\-4 & 5 & 9\end{array}\right]\left[\begin{array}{l}x_1 \\x_2 \\x_3\end{array}\right]=\left[\begin{array}{c}0 \\8 \\-9\end{array}\right][/tex]

This is in the form of Ax = b

Here, [tex]A=\left[\begin{array}{ccc}1 & 1-2 & 1 \\0 & 2 & -8 \\-4 & 5 & 9\end{array}\right], x=\left[\begin{array}{l}x_1 \\x_2 \\x_3\end{array}\right] x[/tex] and [tex]b=\left[\begin{array}{c}0 \\8 \\-9\end{array}\right] \\[/tex]

Therefore all the vector equations are written as a matrix equations

For more questions on matrix equations

https://brainly.com/question/12962407

#SPJ4

Let's call the number of minutes of calls "x".Plan A costs 15$ + 0.10x per month.

Plan B costs 22$ + 0.08x per month.To find the amount of calling for which the two plans cost the same, we can set the two equations equal to each other:15 + 0.10x = 22 + 0.08xSubtract 0.08x from both sides:15 + 0.02x = 22Subtract 15 from both sides:0.02x = 7Divide both sides by 0.02:x = 350So the two plans cost the same for 350 minutes of calling.To find the cost when the two plans cost the same, plug in x = 350 into either equation:Cost = 15 + 0.10x = 15 + 0.10 * 350 = 15 + 35 = 50.

The volume of the solid generated when the region R is rotated around y = -5 is 7π/4. so the correct answer is (b).

To find the volume , we can use the method of cylindrical shells.

Consider a vertical slice of R at x = a, where a is a point on the x-axis. Let h be the height of this slice and r be the distance from the line y = -5 to the point (a, h). Then the volume of the cylindrical shell generated by rotating this slice around the line y = -5 is given by:

V(a) = 2πrh Δa

where Δa is the thickness of the slice. Note that we multiply by 2 because the slice can generate a shell both above and below the line y = -5.

To find the values of h and r in terms of x, we can use the fact that the centroid of R is (4, 3), which means that the equation of the line passing through the centroid and the point (x, h) is given by:

(y - 3) = m(x - 4)

where m is the slope of the line. Since the line passes through the point (x, h), we have:

(h - 3) = m(x - 4)

Solving for h, we get:

h = mx - (4m - 3)

To find the slope m, we can use the fact that R has area 1. Since R lies in quadrant I, we know that m > 0. Then we have:

1 = ∫[0, 4] h dx = ∫[0, 4] (mx - (4m - 3)) dx

Simplifying, we get: 1 = (1/2) m(4^2) - (4m - 3)(4)

Solving for m: m = 1/8

Substituting this into the equation for h, h = (x/8) - 11/8

To find the distance r from the line y = -5 to the point (x, h), we have:

r = h + 5 = (x/8) - 3/8

Now we can integrate V(a) over the interval [0, 4] to get the total volume:

V = ∫[0, 4] V(a) da = ∫[0, 4] 2πr(h + 5) Δa

Substituting for r and h, we get:

V = ∫[0, 4] 2π[(x/8) - 3/8][(x/8) - 11/8 + 5] Δx

Simplifying, V = π/2 ∫[0, 4] (x^2/64) - (27/64)x + 2.25 Δx

Integrating, V = π/2 [(1/192)x^3 - (27/128)x^2 + 2.25x] [0, 4]

V = (π/2) [(1/12) - (27/32) + 9]

V = 7π/4

Therefore, the volume of the solid generated when the region R is rotated around y = -5 is 7π/4. Answer: (b)

To know more about volume:

https://brainly.com/question/11168779

#SPJ4

The number of students that speak  both French and Spanish are 7 students, 24 students speak French only, and 16 students speaks Spanish only.

To solve this problem, we can use the formula for the size of a union of two sets:

|A ∪ B| = |A| + |B| - |A ∩ B|,

where |A| represents the number of elements in set A.

Let F be the set of students who speak French, S be the set of students who speak Spanish, and N be the set of students who speak neither language. Then, we have:

|F| = 31,

|S| = 23,

|N| = 14.

We want to find the number of students who speak both French and Spanish, as well as the number who speak French only and the number who speak Spanish only. Let B be the set of students who speak both French and Spanish, F-only be the set of students who speak French only, and S-only be the set of students who speak Spanish only. Then:

|B| = (unknown),

|F-only| =  (unknown),

|S-only| =  (unknown).

We know that the total number of students is 60, so:

|F ∪ S ∪ N| = 60.

Using the formula for the size of a union, we get:

|F ∪ S ∪ N| = |F| + |S| + |N| - |F ∩ S| - |(F ∩ N) ∪ (S ∩ N)|.

We can simplify this expression using the fact that |N| = |(F ∩ N) ∪ (S ∩ N)|, since the sets (F ∩ N) and (S ∩ N) are disjoint:

60 = 31 + 23 + 14 - |B| - |N|.

|N| = 14.

Substituting |N| = 14, we get:

|B| = |F ∩ S| - 9.

So, to find |B|, we need to determine |F ∩ S|. We can use the formula for the size of an intersection:

|F ∩ S| = |F| + |S| - |F ∪ S|.

Substituting the known values, we get:

|F ∩ S| = 31 + 23 - |F ∪ S|.

|F ∪ S| = 31 + 23 - |F ∩ S|.

|F ∪ S| = 54 - |B|.

Substituting this into the expression for |F ∪ S ∪ N|, we get:

60 = 31 + 23 + 14 - |B| - 14 - |B|.

2|B| = 54 - 31 - 23 + 14 = 14.

|B| = 7.

So there are 7 students who speak both French and Spanish.

To find |F-only| and |S-only|, we can use the following formulas:

|F-only| = |F| - |B|,

|S-only| = |S| - |B|.

Substituting the known values, we get:

|F-only| = 31 - 7 = 24,

|S-only| = 23 - 7 = 16.

Therefore, there are 7 students who speak both French and Spanish, 24 students who speak French only, and 16 students who speak Spanish only.

Learn more about set theory at:https://brainly.com/question/29774143

#SPJ1

Answer: 20-13=e

Step-by-step explanation: 20-13 is 7 so e=7 so you plug in 7 for e and which ever one makes sense, is the right answer so 20-13=e

Deal A is better if the cost of one gallon of gas under Deal A is less than $3.82.

percentage, a relative value indicating hundredth parts of any quantity.

Deal A offers % off the price of the gas. Let's say the regular price per gallon is $x. Then, the discounted price per gallon would be:

x - 0.5x = 0.5x

So, the cost of one gallon of gas under Deal A would be 0.5x.

We don't know the regular price per gallon, but we do know that the cost of % gallons under Deal A is $15.70. So, we can set up the following proportion:

% / 1 = $15.70 / 0.5x

% = 15.7 / 0.5x

Deal B offers 11 gallons of gas for $42.00. So, the cost of one gallon of gas under Deal B would be:

$42.00 / 11 = $3.82 (rounded to two decimal places)

Therefore, Deal A is better if the cost of one gallon of gas under Deal A is less than $3.82.

To learn more on Percentage click:

https://brainly.com/question/28269290

#SPJ1

The measure of angle ∠2 will be 111° by the supplementary property.

Lines are straight with little depth or width. Perpendicular lines, intersecting lines, transversal lines, and other types of lines will be covered. An angle is a shape formed by two rays emerging from a common point. In this field, you may also come across alternate and corresponding angles.

Supplementary angles are those that total 180 degrees. Angles 130° and 50°, for example, are supplementary angles because the sum of 130° and 50° equals 180°.

The value of the angle will be calculated as,

∠2 = 180 - 69

∠2 = 111°

Therefore, the value of the ∠2 is 111°.

To know more about lines and angles follow

https://brainly.com/question/28769265

#SPJ1

Step-by-step explanation:

P(A | B) = P(AꓵB)/P(B) = 3/8 / 7/8 = 3/8 × 8/7 = 3/7

Answer:

12

Step-by-step explanation:3/6 is 1/2 when u simplify it. Then u divide 24 in half and get 12

By rearranging the given lines of code, we have created a method that takes in the width and height of a balloon and calculates its volume using the formula for the volume of an ellipsoid.

To start, we need to import the Scanner class from the Java.util package, as we will be taking input from the user. Then, we define a public class called "Balloon" and initialize a variable "c" to be half the value of the width input.

Next, we create the method "balloonVolume" which takes in two parameters: width and height. We specify that width is the horizontal diameter of the balloon and height is the vertical diameter of the balloon. We then set two variables, "a" and "b" to be half the value of width and height respectively.

Using the formula for the volume of an ellipsoid, which is V = 4/3 * pi * a * b * c, we calculate the volume of the balloon and store it in the variable "volume." Finally, we return the volume.

In the main method, we create a Scanner object and prompt the user to input the width and height of the balloon. We then call the "balloonVolume" method and pass in the user's input as arguments. The method calculates the volume of the balloon and returns it, which we can then print out to the user.

To know more about volume here.

https://brainly.com/question/11168779

#SPJ4