What is the area in square feet of the shaded part of the rectangle below

To solve this problem, we can use the Greatest Common Factor (GCF) of 10 and 20.

The GCF is the largest number that divides evenly into both 10 and 20. To find the GCF, we can use a factor tree.

We start with 10 and 20 as our starting numbers.

10 = 2 * 5

20 = 2 * 2 * 5

We can see that both 10 and 20 have a factor of 2 and a factor of 5. The Greatest Common Factor between 10 and 20 is 2 * 5, or 10.

Therefore, the greatest number of portions of trail mix Stanley can make is 10.

As per the given mean value, the coefficient of range is 40%.

We know that the mean of these numbers is 10, which means that if we add them all up and divide by 4 (since there are 4 numbers in the set), the result will be 10. Using algebra, we can set up the following equation:

(8 + 9 + x + 12) / 4 = 10

If we simplify this equation, we get:

(29 + x) / 4 = 10

Multiplying both sides by 4, we get:

29 + x = 40

Subtracting 29 from both sides, we get:

x = 11

So we now know that the four numbers are 8, 9, 11, and 12. To find the range, we simply subtract the lowest value (8) from the highest value (12):

12 - 8 = 4

Therefore, the range of the numbers is 4.

To find the coefficient of range, we use the formula:

Coefficient of range = (Range / Mean) x 100%

Plugging in the values we just found, we get:

Coefficient of range = (4 / 10) x 100%

Coefficient of range = 40%

To know more about mean here

https://brainly.com/question/30891252

#SPJ4

a) The probability that the player is a non-pitcher not from the Dominican Republic is given as follows: 0.7578 = 75.78%.

b) The probability that a Dominican player is a pitcher is given as follows: 0.8595 = 85.95%.

c) The probability that a non-pitcher is not Dominican is given as follows: 0.4985 = 49.85%.

A probability is calculated as the division of the desired number of outcomes by the total number of outcomes in the context of a problem/experiment.

Of the Dominican players, the percentages are given as follows:

The total percentage of Dominican players is of 10.5%, hence the value of x is given as follows:

0.056 x 0.42 + 0.58x = 0.105

x = (0.105 - 0.056 x 0.42)/0.58

x = 0.1405.

Of the 58% of the batter, 14.05% are from the Dominican Republic, hence the probability of chosen a batter not from the Dominican Republic is of:

p = 1 - 0.1405/0.58

p = 0.7578 = 75.78%.

14.05% of the players from the Dominical Republic are batters, hence the probability of choosing a pitcher is given as follows:

1 - 0.1405 = 0.8595 = 85.95%.

Of the 58% of the batters, 14.05% are Dominican, hence the 85.95% are not Dominican, thus the probability of choosing a non-Dominican batter is given as follows:

0.58 x 0.8595 = 0.4985 = 49.85%.

More can be learned about probability at https://brainly.com/question/24756209

#SPJ1

At Station Y, 15 litres of gasoline would cost £18.

Cost is the amount of money spent by a business to produce or create goods or services. It excludes the profit margin markup. Cost is the sum of money spent on making a good or product, as seen from the seller's perspective.

Ellie must have visited Station Y because she paid $24 for 20 litres of gasoline, proving that she did.

b) We can observe from the graph that 20 litres of gasoline at Station Y costs £24. With the help of this data, we can calculate how much a litre of gasoline costs:

Cost of 1 litre of petrol = Cost of 20 litres of petrol / 20

Cost of 1 litre of petrol = £24 / 20

Cost of 1 litre of petrol = £1.20

Therefore, 15 litres of petrol at Station Y would cost:

Cost of 15 litres of petrol = Cost of 1 litre of petrol x 15

Cost of 15 litres of petrol = £1.20 x 15

Cost of 15 litres of petrol = £18

To know more about cost visit:-

https://brainly.com/question/18457742

#SPJ1

We can start by calculating the interest earned by the man over 8 months.

First, we need to convert the annual interest rate of 15% to a monthly rate by dividing it by 12:

15% / 12 = 1.25%

Next, we can use the formula for simple interest to calculate the interest earned:

Interest = Principal x Rate x Time

where:

Principal = sh. 600,000 (the amount deposited)

Rate = 1.25% (the monthly interest rate)

Time = 8/12 (8 months is 2/3 of a year)

Plugging in the values, we get:

Interest = 600,000 x 1.25% x 8/12

Interest = 5,000

Therefore, the man will earn sh. 5,000 in interest over 8 months.

To find the total amount in his account after 8 months, we simply add the interest earned to the initial deposit:

Total amount = Principal + Interest

Total amount = 600,000 + 5,000

Total amount = sh. 605,000

Therefore, the amount on the man's account after 8 months will be sh. 605,000.

The probability that at least one program system will detect an error is 0.8319 (approx) or 0.832 (approx).

Given information:

five program systems are prepared so that they work independently of each other. Each system has a 0.3 chance of detecting an error.

Find the probability that at least one program system will detect an error. Use 4 decimal places.The probability of a system detecting an error is 0.3.

The probability of a system not detecting an error is 1 - 0.3 = 0.7.

Probability that none of the five systems detects an error is, P(error not detected in any of the five systems) = P(not detected in 1st) x P(not detected in 2nd) x ... x P(not detected in 5th) = 0.7 x 0.7 x 0.7 x 0.7 x 0.7 = 0.16807.

The probability that at least one system detects an error is, P(at least one system detects an error) = 1 - P(error not detected in any of the five systems) = 1 - 0.16807 = 0.8319 (approx).

Therefore, the probability that at least one program system will detect an error is 0.8319 (approx) or 0.832 (approx).

Hence, the correct option is 0.832.

Learn more about probability at

https://brainly.com/question/31112325

#SPJ11

Answer:

Step-by-step explanation:

You can’t solve this equation as none of the numbers have the same coefficient to solve. If you wanted to solve for x and y, you will need two equations as there are two unknown variables in the equation and the only way to solve for x and y is to use simultaneous method which includes two equations.

The volume of water in each bowl is approximately 666.67 ml.

Miko bought five 2-liter bottles of water, which means that she had a total of 10 liters of water. She then poured all the water equally into 15 bowls. To find out the volume of water in each bowl, we need to divide the total volume of water by the number of bowls.

We can start by converting the 10 liters of water into milliliters (ml), which will make it easier to work with. To do this, we multiply 10 by 1000, since there are 1000 ml in one liter. This gives us a total of 10,000 ml of water.

Next, we divide the total volume of water (10,000 ml) by the number of bowls (15) to find the volume of water in each bowl. This can be written as:

Volume of water in each bowl = Total volume of water / Number of bowls

Volume of water in each bowl = 10,000 ml / 15

Volume of water in each bowl = 666.67 ml (rounded to two decimal places)

To know more about volume here

https://brainly.com/question/11168779

#SPJ4

The method used to collect data will depend on the specific research question being asked and the resources available to the researcher.

One common method for collecting data is through experimentation. This involves designing a controlled experiment that allows researchers to manipulate one or more variables while keeping all other factors constant.

Observational data can be particularly useful when it is not possible or ethical to manipulate variables in an experiment.

Surveys and questionnaires are another way to collect data. These methods involve asking people to provide information about their attitudes, beliefs, and behaviors.

Other methods for collecting data include case studies, in which researchers closely examine a single individual or group, and archival research, in which data is collected from existing records, such as census data or medical records.

By carefully selecting the right method for their research, scientists can gather accurate and reliable data that can help to advance our understanding of the world around us.

To know more about data here

https://brainly.com/question/13103333

#SPJ4

The variance for the number of defective parts is 0.7125.

(a) What is the probability that exactly 3 parts will be defective? (Round your answer to four decimal places.)In the given question, the probability of a part being defective is 5%, which is represented as p=0.05. The probability of a part being non-defective is (1 - 0.05) = 0.95.The given question represents a binomial experiment, which includes the following conditions:The experiment consists of n identical trials.Each trial has only two possible outcomes, a success, and a failure.Success has probability p and failure has probability 1-p.The trials are independent.To calculate the probability of exactly 3 parts being defective when 15 parts are selected randomly, we use the following formula:P (X = k) = nCk x pk x (1-p) n-kWhere P(X=k) is the probability of getting k defective parts, nCk is the number of ways of getting k defects from n parts, pk is the probability of getting k defective parts, and (1-p) n-k is the probability of getting n-k non-defective parts.p = 0.05q = (1 - 0.05) = 0.95n = 15a. P (X = 3) = 15C3 x 0.05³ x 0.95¹² = 0.2508The probability of getting exactly 3 defective parts is 0.2508. Hence, the required probability is 0.2508.(b) What is the probability that the number of defective parts will be more than 2 but fewer than 6? (Round your answer to four decimal places.)b. We need to calculate the probability of getting defective parts more than 2 but less than 6.P (3 < X < 6) = P (X = 3) + P (X = 4) + P (X = 5)P (X = 3) = 15C3 x 0.05³ x 0.95¹² = 0.2508P (X = 4) = 15C4 x 0.05⁴ x 0.95¹¹ = 0.0925P (X = 5) = 15C5 x 0.05⁵ x 0.95¹⁰ = 0.0204P (3 < X < 6) = 0.2508 + 0.0925 + 0.0204 = 0.3637The probability of getting defective parts between 2 and 6 is 0.3637. Hence, the required probability is 0.3637.(c) What is the probability that fewer than 3 parts will be defective? (Round your answer to four decimal places.)c. We need to calculate the probability of getting fewer than 3 parts defective. The probability of getting zero defective parts or getting one defective part is given by:P (X = 0) = 15C0 x 0.05⁰ x 0.95¹⁵ = 0.4630P (X = 1) = 15C1 x 0.05¹ x 0.95¹⁴ = 0.3456P (X < 3) = P (X = 0) + P (X = 1) = 0.4630 + 0.3456 = 0.8086The probability of getting fewer than 3 defective parts is 0.8086. Hence, the required probability is 0.8086.(d) What is the expected number of defective parts?The expected number of defective parts is given by:μ = npμ = 15 × 0.05μ = 0.75The expected number of defective parts is 0.75.(e) What is the variance for the number of defective parts?The variance for the number of defective parts is given by:σ² = npqσ² = 15 × 0.05 × 0.95σ² = 0.7125The variance for the number of defective parts is 0.7125.

Learn more about Variance

brainly.com/question/13091634

#SPJ11

Table values are -3, -1, 3, 5, 13

A function is a mathematical object that maps each element from one set to a unique element in another set. Functions are represented using symbols and can be described using graphs, tables, or equations.

Given function is,

[tex]f(x)=2x +3[/tex]

Solve for x = -3,   f(-3) = 2×(-3) + 3 = -6 + 3 = -3

f(-3) = -3

Solve for x = -2,   f(-2) = 2×(-2) + 3 = -4 + 3 = -1

f(-2) = -1

Solve for x = 0,   f(0) = 2×(0) + 3 = 0 + 3 = +3

f(0) = 3

Solve for x = 1,   f(1) = 2×(1) + 3 = 2 + 3 = 5

f(1) = 5

Solve for x = 5,   f(5) = 2×(5) + 3 = 10 + 3 = 13

f(5) = 13

To know more about function, visit:

https://brainly.com/question/11624077

#SPJ1

The given functions [tex]y_1[/tex] and [tex]y_2[/tex] are linearly dependent on the interval (0, 1)

(a) Since [tex]y_1 = -42[/tex] on (0,1), the functions are linearly independent on (0,1).

This option does not make sense because [tex]y_1[/tex] is not always -42 on the interval (0,1).

(b) Since [tex]y_1 = 5y_2[/tex] on (0,1), the functions are linearly independent on (0,1).

This option is not correct because if we substitute y1 with 5y2 in the equation [tex]c_1 y_1 + c_2 y_2 = 0[/tex], we get [tex]5c_2 y_2 + c_2 y_2 = 0,[/tex] which means we can write  [tex]y_1[/tex]as a constant times [tex]y_2[/tex], so they are dependent.

(c) Since [tex]y_1 = 3y_2[/tex] on (0,1), the functions are linearly dependent on (0,1)."

To see why, we can substitute [tex]y_1[/tex] with [tex]3y_2[/tex] in the equation [tex]c_1 y_1 + c_2 y_2 = 0[/tex]:

[tex]c_1 (3y_2) + c_2 y_2 = 0[/tex]

Simplifying this, we get:

[tex](3c_1 + c_2) y_2 = 0[/tex]

Since [tex]y_2[/tex] is not equal to 0 for any value of t in the interval (0,1), this means that [tex]3c_1 + c_2[/tex] must equal 0. This is a non-trivial solution for [tex]c_1[/tex] and [tex]c_2[/tex], which means that [tex]y_1[/tex] and[tex]y_2[/tex] are linearly dependent on the interval (0,1).

(d) Since[tex]y_1 = -1/2 y_2[/tex]on (0,1), the functions are linearly dependent on (0,1).

This option is also correct because if we substitute [tex]y_1[/tex] with -1/2 y2 in the equation [tex]c_1 y_1 + c_2 y_2 = 0,[/tex] we get [tex]-1/2 c_2 y_2 + c_2 y_2 = 0[/tex], which means we can write[tex]y_1[/tex]as a constant times [tex]y_2[/tex], so they are dependent.

Therefore, the correct answer is either option d, and the functions [tex]y_1[/tex] and [tex]y_2[/tex] are dependent on the interval (0,1).

To practice more questions about linearly independent:

https://brainly.com/question/10725000

#SPJ11

There are four presentation methods to choose from. These include reciprocal training, traditional classroom instruction, audiovisual training, and distance learning. The multiple selection question format asks which presentation methods are included.

What is a presentation method?

A presentation method refers to a way to deliver information to a group of individuals. Presentation methods are often used to teach concepts, inform, or persuade the audience. Various presentation methods are available for different types of information, such as traditional classroom instruction, audiovisual training, and distance learning. These methods vary in how information is presented and how participants engage with the material.Presentation methods that are available Reciprocal Training, Reciprocal Training, often known as reciprocal teaching, is a technique that involves individuals exchanging roles as teachers and learners. This method has been shown to be effective in developing students' comprehension of academic material.Traditional Classroom Instruction, Traditional classroom instruction, also known as classroom instruction, is a technique that has been used for centuries. A teacher is in front of a group of students, who are expected to engage with the material and participate in activities.Audiovisual Training Audiovisual training refers to the use of video, audio, and other visual aids in the delivery of instruction. This approach is thought to be more engaging and memorable than other teaching methods.Distance Learning Distance learning, or online learning, is a form of education that is delivered via the internet. This allows individuals to learn from any location, as long as they have access to the internet. This type of education is often more cost-effective than traditional classroom instruction.Therefore, all of the above presentation methods are effective.

For more questions on distance learning

https://brainly.in/question/17750089

#SPJ11

Answer:

If the value of Mike's car decreased by 30%, we can calculate the new value of the car as follows:

New value = Original value - (Percentage decrease × Original value)

Percentage decrease = 30%

Original value = 12000

New value = 12000 - (0.30 × 12000)

New value = 12000 - 3600

New value = 8400

Therefore, at the end of the decrease, the value of Mike's car was 8400.

All the reasonable measurement for each object can be define as given table below.

Measurements refer to the process of determining the magnitude, quantity, or degree of something using standardized units or instruments. It involves observing and recording data about an object, event, or phenomenon, and then comparing it to a reference standard to obtain a numerical value. They allow us to quantify and compare physical properties accurately and provide a universal language for expressing quantities.

                Objects                                           Measurements

To know more about units, visit:

https://brainly.com/question/18522397

#SPJ1

answer is in the image below:

Answer:

-3, 2+3i, and 2-3i.

Step-by-step explanation:

To find the roots of x^3-x^2+x+39=0, we use the Rational Root Theorem and synthetic division to test possible rational roots. We find that -3 is a root, and divide by (x+3) to get the quadratic factor x^2-4x+13=0. Solving this using the quadratic formula gives us the remaining roots of 2+3i and 2-3i. Therefore, the roots of the equation are -3, 2+3i, and 2-3i.

Answer:

Step-by-step explanation:

[tex]f(x)=\frac{27}{4} x[/tex]

[tex]p(x)=\sqrt{3x}[/tex]

[tex][p(x)]^6=(3^\frac{1}{2}x^\frac{1}{2})^6= 27x^3[/tex]

[tex][p(x)]^6g(x)=27x^3(\frac{x}{4} )=\frac{27x^4}{4}[/tex]

[tex][p(x)]^6g(x)[t(x)]^3=\frac{27x^4}{4} (\frac{1}{x} )^3=\frac{27x^4}{4x^3} =\frac{27}{4} x[/tex]    

Solution:     [tex][p(x)]^6g(x)[t(x)]^3=f(x)[/tex]

I think there might be nicer solutions but this works!

Calculating Cost of Goods Sold and Ending Inventory under Perpetual FIFO, LIFO, and Weighted Average Cost [LO 7-S1] In its first month of operations, Literacy for the Illiterate opened a new bookstore and bought merchandise in the following order 400 units at $5 on January 1, 2600 units at $7 on January 8, and 3830 units at $8 on January 29.

                Assuming 1.030 units are on hand at the end of the month M7-22(Supplement 7A) Calculating Cost of Goods Sold and Ending Inventory under Perpetual Weighted Average Cost [LO 7-S1]

In order to calculate the cost of goods available for sale, cost of goods sold and ending inventory under the weighted average cost flow assumptions, you need to first calculate the weighted average cost of the goods.

Weighted Average Cost = (400 units x $5) + (2600 units x $7) + (3830 units x $8) / (400 + 2600 + 3830)

                                        = $6.62

Cost of Goods Available for Sale = Weighted Average Cost x (400 + 2600 + 3830)

                                                       = $6.62 x 7,830

                                                       = $51,916.60

Cost of Goods Sold = Weighted Average Cost x 800 units

                                 = $6.62 x 800

                                 = $5,296.00

Ending Inventory = Cost of Goods Available for Sale - Cost of Goods Sold

                            = $51,916.60 - $5,296.00

                            = $46,620.60

The cost of Goods Available for Sale is $51,916.60

#SPJ11

Learn more about the Cost of Goods Sold at: https://brainly.com/question/24561653

Answer:

3x, 4x | 5, 3

Step-by-step explanation:

The relationship that is noted between two or more variables is termed a correlation. Correlation refers to the statistical association or relationship between two or more variables.

It indicates the degree to which the variables are related or how they are related to each other. Correlation can be positive, negative, or zero, depending on the direction and strength of the relationship between the variables.

A positive correlation indicates that as one variable increases, the other variable also increases. A negative correlation indicates that as one variable increases, the other variable decreases. Zero correlation indicates that there is no relationship between the variables.

To learn more about correlation

https://brainly.com/question/30116167

#SPJ4

Given:-

[tex] \: [/tex]

[tex] \: [/tex]

Solution:-

[tex] \: [/tex]

put the given values in tha equation

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━

hope it helps ⸙

As a result, the Styrofoam collar has a volume of roughly 179.594 cubic inches.

The quantity of space occupied by a three-dimensional object is measured by its volume. Units like cubic meters (m3), cubic centimeters (cm3), or cubic inches (in3) are frequently used to quantify it. Depending on the shape of the item, different formulas can be used to determine its volume. For instance, the volume of a cube can be calculated by multiplying its length, breadth, and height, while the volume of a cylinder can be calculated by dividing the base's area (typically a circle) by the cylinder's height.

given

We must apply the calculation for the volume of a cone's frustum in order to determine the volume of the Styrofoam collar:

[tex]V = (1/3)\pi h(R^2 + Rr + r^2)[/tex]

where h is the height of the frustum, r is the small radius, and R is the large radius.

Given the numbers, we can determine:

R = 5 in.

3 centimeters is r.

24 inches tall

With these numbers entered into the formula, we obtain[tex]V = (1/3)\pi (24)(5^2 + 5*3 + 3^2)\\\\ 179.594 cubic inches[/tex]

As a result, the Styrofoam collar has a volume of roughly 179.594 cubic inches.

To know more about volume visit :-

https://brainly.com/question/13338592

#SPJ1

Answer:

[tex]\sqrt{231}[/tex] cm

Step-by-step explanation:

The Pythagorean theorem is a mathematical principle that relates to the three sides of a right triangle. The formula for this is:

[tex]a^2 + b^2 = c^2[/tex]

In this case, the hypotenuse (c) is 16 cm, and one of the legs (a) is 5 cm. We can plug in the values and solve for the missing value.

[tex]5^2+b^2=16^2[/tex]

[tex]25+b^2=256[/tex]

[tex]b^2=256-25[/tex]

[tex]b^2=231[/tex]

[tex]b = \sqrt{231}[/tex] cm

The equation of the circle is [tex]x^2 + y^2 + 6x - 18y + 65 = 0[/tex].

Given:

Equation of the circle is [tex](x+3)^2+(y-9)^2=5^2[/tex]

Expand the equation

[tex](x+3)^2 = (x+3)(x+3) = x^2 + 3x + 3x + 9 = x^2 + 6x + 9[/tex]

[tex](y-9)^2 = (y-9)(y-9) = y^2 - 9y - 9y + 81 = y^2 - 18y + 81[/tex]

[tex]5^2 = 25[/tex]

Then, substitute the expanded expressions into the equation

[tex](x+3)^2+(y-9)^2=5^2\\(x^2 + 6x + 9) + (y^2 - 18y + 81) = 25\\[/tex]

Simplify and combine like terms

[tex](x^2 + 6x + 9) + (y^2 - 18y + 81) = 25\\x^2 + y^2 + 6x - 18y + 90 = 25[/tex]

Rearrange the equation so that one side is 0

[tex]x^2 + y^2 + 6x - 18y + 90 = 25\\x^2 + y^2 + 6x - 18y + 90 - 25 = 0\\x^2 + y^2 + 6x - 18y + 65 = 0[/tex]
Thus, the equation of a circle [tex](x+3)^2+(y-9)^2=5^2[/tex] can be rearranged using the distributive property to form [tex]x^2 + y^2 + 6x - 18y + 65 = 0[/tex], with one side equaling 0.

Learn more about distributive property here: https://brainly.com/question/2807928

#SPJ11

The sampling method that best fits your experiment is convenience sampling.

Sampling is the process of selecting a subset of individuals or items from a larger population in order to gather information and draw conclusions about the entire population. Sampling is often used in scientific research, market research, and other fields where it is impractical or impossible to measure the entire population.

There are many different types of sampling methods, including random sampling, stratified sampling, cluster sampling, and convenience sampling. Each method has its own advantages and disadvantages, and the choice of sampling method depends on the specific research question and the resources available.

The sampling method that best fits your experiment is convenience sampling. Convenience sampling is a non-probability sampling method that involves selecting individuals who are readily available and accessible to the researcher. In your case, you are selecting individuals who are present in front of a major grocery supermarket, which is a convenient location. Convenience sampling is often used in situations where it is difficult or impractical to obtain a random sample, and is commonly used in market research and pilot studies.

However, it is important to note that convenience sampling has some limitations. Since the sample is not randomly selected, it may not be representative of the population as a whole. In your case, selecting supermarkets in high median salary areas may introduce bias into the sample, as it may not accurately represent the entire population of USA voters. Additionally, the sample size and characteristics may be affected by factors such as time of day, day of the week, and other factors that may affect who is present in front of the supermarket at a given time. Therefore, the results obtained from this sampling method may not be generalizable to the entire population of USA voters.

To know more about population visit:

https://brainly.com/question/29177434

#SPJ1

Answer:

10 units

Step-by-step explanation:

calculate the distance d using the distance formula

d = [tex]\sqrt{(x_{2}-x_{1})^2+(y_{2}-y_{1})^2 }[/tex]

with (x₁, y₁ ) = (- 9, - 7 ) and (x₂, y₂ ) = (- 3, 1 )

d = [tex]\sqrt{(-3-(-9))^2+(1-(-7)^2}[/tex]

  = [tex]\sqrt{(-3+9)^2+(1+7)^2}[/tex]

  = [tex]\sqrt{6^2+8^2}[/tex]

  = [tex]\sqrt{36+64}[/tex]

  = [tex]\sqrt{100}[/tex]

  = 10 units

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

where ,

[tex] \: \: \star \rm \red{x_1 = -9 , x_2 = -3 } \\\star \green {\rm y_1 = -7 , y_2 = 1}[/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

[tex] \: [/tex]

Therefore , the distance between two points is 10 units !

━━━━━━━━━━━━━━━━━━━━━━━

hope it helps ⸙

The sides of the squares be to obtain a box with the largest volume is 114.20 inch³.

Quadratic functions are used in various fields of engineering and science to obtain the values ​​of various parameters. Graphically, they are represented by parabolas. Determines the direction of the curve based on the highest order coefficient. The word "quadratic" is derived from the word "Quad", which means square. In other words, a quadratic function is a "polynomial function of degree 2.

According to the Question:

Let a be the size of the square to be cut at 4 corners.

The cardboard is folded along the dotted line such that following are the box dimensions

Given that

Length, L= 11.5–2a ; Width. B = 8–2a ; Height, H = a

Volume of box, V = (18–2a )(8–2a) a

  V = (11.5-2a)(8-2a)a

⇒ V = 92a -3a²-16+ 4a³

⇒ V = 4a³-3a² +92a -16

Now,

The condition for volume to be maximum is that,

dV/da = 0

⇒ [tex]\frac{dv}{da} (4a^3)- \frac{dv}{da} (3a^2) +\frac{dv}{da}(92a) - \frac{dv}{da} (16)[/tex]

⇒ 12a² -6a + 92

Taking common 2 from the above equation, we get:

⇒ 6a² - 3a + 46

Therefore,

The roots of this quadratic equation are,

a = 6.93 and 1.729

Case 1: If a = 6.93,

then B= -5.87 < 0  which is not a valid dimension.

Case 2: If a =1.729 then,

L = 14.54 ; B= 4.54 ; H=1.729

Therefore,

Volume of the box = 14.54 x 4.54 x 1.729 = 114.20

Therefore, the sides of the squares be to obtain a box with the largest volume is 114.20 inch³

Complete Question:

An open box is to be made from 8 inches by 11.5 inches piece of cardboard by cutting squares of equal size from the four corners and bending up the sides. How long should the sides of the squares be to obtain a box with the largest volume?

Learn more about Volume:

https://brainly.com/question/1578538

#SPJ4

All the equation shown as inequalities:

3h-7-19 ; h≥14 ; h=60 ; 3h +12 < 18 ; 20=h+h ; 8> h​

When resolving an inequality, you can do one of the following:

Thus, all the equation shown as inequalities:

3h-7-19 ; h≥14 ; h=60 ; 3h +12 < 18 ; 20=h+h ; 8> h​

Know more about the inequalities

https://brainly.com/question/24372553

#SPJ1

The complete question is-

Which of the options below are inequalities? Choose all of the correct answers.

3h-7-19 ; h≥14 ; h=60 ; 3h +12 < 18 ; 20=h+h ; 8> h​

Answer:

first one

Step-by-step explanation:

The equation that models the future cost of gasoline is y=1.19(1.003)^(x), where "y" represents the future cost of gasoline per gallon and "x" represents the number of months since January 1, 1999.

In this equation, the initial cost of gasoline is $1.19 per gallon, and the cost increases by 0.3% per month, which is represented by the factor of (1.003)^(x).

Using this equation, you can calculate the future cost of gasoline for any number of months after January 1, 1999. For example, if you want to calculate the cost of gasoline 24 months after January 1, 1999, you can plug in x=24 and calculate y as follows:

y = 1.19(1.003)^(24)

y = 1.19(1.08357)

y = 1.288 per gallon

Therefore, the predicted cost of gasoline 24 months after January 1, 1999 is $1.288 per gallon.

The rabbit covers a distance of 30 meters in 10 seconds at a constant speed of 3m/s.

As we know that distance is equal to speed multiplied by time, we can use this formula to calculate the distance covered by the rabbit in 10 seconds. Given that the speed of the rabbit is constant at 3m/s, we can use this value to calculate the distance it covers in 1 second.

So, distance covered by rabbit in 1 second = Speed of rabbit = 3m/s

Now we can use this value to find the distance covered by the rabbit in 10 seconds, which is equal to 10 times the distance covered by the rabbit in 1 second.

Distance covered by rabbit in 10 seconds = 3m/s x 10 seconds

= 30 meters

To know more about distance here

https://brainly.com/question/4199102

#SPJ4