What is the average kinetic energy of particles in a gas at a temperature of 245 Kelvins?

Answer:

The paper focuses on the biology of stress and resilience and their biomarkers in humans from the system science perspective. A stressor pushes the physiological system away from its baseline state toward a lower utility state. The physiological system may return toward the original state in one attractor basin but may be shifted to a state in another, lower utility attractor basin. While some physiological changes induced by stressors may benefit health, there is often a chronic wear and tear cost due to implementing changes to enable the return of the system to its baseline state and maintain itself in the high utility baseline attractor basin following repeated perturbations. This cost, also called allostatic load, is the utility reduction associated with both a change in state and with alterations in the attractor basin that affect system responses following future perturbations. This added cost can increase the time course of the return to baseline or the likelihood of moving into a different attractor basin following a perturbation. Opposite to this is the system's resilience which influences its ability to return to the high utility attractor basin following a perturbation by increasing the likelihood and/or speed of returning to the baseline state following a stressor. This review paper is a qualitative systematic review; it covers areas most relevant for moving the stress and resilience field forward from a more quantitative and neuroscientific perspective.

Explanation:

During a normal reaction to a stressful event, muscles are moved to their maximum capacity, and sensitivity is increased.

This is defined as the ability of an organism to respond to stimuli such as touch, sensation etc.

During exercise, sensitivity to substances such as insulin when glucose transport wears off helps to balance energy supply.

Read more about Sensitivity here https://brainly.com/question/8043930

Answer:

why does anyone need to know

Explanation:

1 plus one = 69

Answer:

67 kg.

Explanation:

From the question,

Total momentum = (mass of the pilot+ mass of the helicopter)×velocity.

I = (m+M)v............................... Equation 1

Where I = Total momentum of the pilot and the helicopter, m = mass of the pilot, M = mass of the helicopter, v = velocity.

make m the subject of the equation

m = (I/v)-M.............................. Equation 2

Given: I = 7200 kg.m/s, v = 60 m/s, M = 53 kg.

Substitute these values into equation 2

m = (7200/60)-53

m = 120-53

m = 67 kg.

Hence the mass of the pilot is 67 kg

Answer:

105 kg*m/s

Explanation:

p=mv

momentum=mass*velocity

momentum=15kg*7m/s

momentum=105kg*m/s

Answer:

Temperature

Explanation:

Answer:

Gravity

Explanation:

Gravity has nothing to do with weather. Temperature means hot or cold, water is rain and thunder, and wind is if it's in the winter or something like that

Explanation:

oh no i hope i dont fall and the  i agree with the other dude

Answer: Okay, thanks I really appreciate the generosity.

Answer:

It is a basic postulate of the theory of relativity that the speed of light is constant. This can be broken down into two parts: The speed of light is independent of the motion of the observer. The speed of light does not vary with time or place.

Explanation:

Answer:

I think its object 1

Explanation:

Because the object that has more weight has a greater momentum and the lightest object that has a less momentum will be easier to change because its lighter.

Answer:

yes

Explanation:

Answer:

Explanation:

answer C looks good

there isn't really a "centrifugal " force. :/    when we are pushed "back" in a car seat.. it's not because there is a force pushing us backwards... but a force pushing us forwards.. just like when turning too,   a force pushes us into the corner,  not a force pushing out of the corner.  :)  

Answer:

P=126W

Explanation:

Sorry if im wrong!

Answer:

125.5 watts

Explanation:

P=work/time

work=F*d

P=(F*d)/t

P=(15*251)/30

P=125.5 watts

since the car moves, the force needed to move is greater than the frictional forces opposing it

a = 3.17m/s²

The acceleration of the car with a mass of 1300 kg which starts from rest generating a force of 4400 N and having a frictional force of 280 N is 3.17 m/s²

Force (F) = 4400 N

Frictional force (Fբ) = 280 N

Fₙ = F – Fբ

Fₙ = 4400 – 280

Thus, the net force acting on the car is 4120 N

Mass (m) = 1300 Kg

Net force (F) = 4120 N

Force = Mass × Acceleration

4120 = 1300 × a

Divide both side by 1300

[tex]a = \frac{4120}{1300}\\\\[/tex]

Therefore, the acceleration of the car is 3.17 m/s².

Learn more: https://brainly.com/question/22800479

Answer:

Gravitational potential energy is the greatest

Explanation

It is the highest point of a roller coaster.

Answer:

Chemical.

Explanation:

Weathering can be defined as the physical and chemical breakdown of rock into smaller pieces called sediment. Weathering can be classified into two categories namely;

I. Physical weathering : it is the process of breaking rocks into pieces without affecting its chemical composition e.g temperature, abrasion and frost action.

II. Chemical weathering : it is the process of breaking rocks into pieces by chemical action which leads to changes in its chemical composition e.g carbonation, hydration, plant acid and oxidation.

In this scenario, Lichen grows on the surface of hornblende granite and causes it to breakdown at a faster rate. Thus, this is an example of chemical weathering

Answer:

C

Explanation:

sin of a right triangle is opposite divided by hypotenuse

in this case, that is 5/8.6 = 0.581395349

you can easily remember the trig functions with this acronym:

SOH-CAH-TOA

S: Sine

O: Opposite

H: Hypotenuse

C: Cosine

A: Adjacent

H: Hypotenuse

T: Tangent

O: Opposite

A: Adjacent

Explanation:

sin = Mp /0P

sin = 5/8,6

sin = 0,58

Answer:

The first scenario!

Explanation:

W=F*d

a) 55*8= 440J

b) 60*6= 360J

c) 50*5= 250J

d) 40*10= 400J

The scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.

Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;

W = F × d

Where F is force applied and d is distance travelled.

From the question;

A force of 55 N moves it 8 m

W = 55N×8m = 440N.m

A force of 60 N moves it 6 m.

W = 60N×6m = 360N.m

A force of 50 N moves it 5 m.

W = 50N×5m = 250N

A force of 40 N moves it 10 m.

W = 40N×10m = 400N.m

Therefore, the scenario with the greatest amount of work done on a wagon is "A force of 55 N moves it 8 m" and the Work done is 440N.m.

Learn more about work done: brainly.com/question/26115962

#SPJ2

Answer:

a. 3.73 m/s b. 27.8 m/s²

Explanation:

(a) Calculate his velocity (in m/s) when he leaves the floor.

Using the conservation of energy principles,

Potential energy gained by basketball player = kinetic energy loss of basket ball player

So, ΔU + ΔK = 0

ΔU = -ΔK

mg(h' - h) = -1/2m(v'² - v²)

g(h' - h) = -1/2(v'² - v²) where g = acceleration due to gravity = 9.8 m/s², h' = 0.960 m, h = 0.250 m, v' =0 m/s (since the basketball player momentarily stops at h' = 0.960 m) and v = velocity with which the basketball player leaves the floor

Substituting the values of the variables into the equation, we have

9.8 m/s²(0.960 m - 0.250 m) = -1/2((0 m/s)² - v²)

9.8 m/s²(0.710 m) = -1/2(-v²)

6.958 m²/s² = v²/2

v² = 2 × 6.958 m²/s²

v² = 13.916 m²/s²

v = √(13.916 m²/s²)

v = 3.73 m/s

(b) Calculate his acceleration (in m/s2) while he is straightening his legs. He goes from zero to the velocity found in part (a) in a distance of 0.250 m.

Using v² = u² + 2as where u = initial speed of basketball player before lengthening = 0 m/s, v = final speed of basketball player after lengthening = 3.73 m/s, a = acceleration during lengthening and s = distance moved during lengthening = 0.250 m

So, making, a subject of the formula, we have

a = (v² - u²)/2s

Substituting the values of the variables into the equation, we have

a = ((3.73 m/s)² - (0 m/s)²)/(2 × 0.250 m)

a = (13.913 m²/s² - 0 m²/s²)/(0.50 m)

a = 13.913 m²/s²/(0.50 m)

a = 27.83 m/s²

a ≅ 27.8 m/s²

Answer:

The Current decreases

Explanation:

HOPE THIS HELPS!

Answer:

Density is affected by volume and mass.

Explanation:

Density is defined as the quantity of mass per unit of volume, or expressed mathematically, d = m/v.

Answer:

700 Joules

Explanation:

What we know:

Force = 350 Newton

Distance = 2 meters

Work = ?

The formula for work is:

Work = force x distance

Plugging values into equation:

Work = 350 Newtons x 2 meters

Work = 700 Joules

I had the same question on the homework assignment with the answers provided:

a) It depends on how long she holds the bag

b) 350 Joules

c) none

d) 350 Newtons

The final answer would be c) none. The work done is 700 Joules. Hope this helps!

Answer:

B. holding a coffee mug

Explanation:

Something must move a distance for work to be done.

Answer:

i don't get it

Explanation:

Time = (20 km) x (1 hr/2 km) x (3,600 sec/hr)

Time = (20 x 1 x 3,600 km-hr-sec) / (2 km-hr)

Time = (20 x 1 x 3,600 / 2) (km-hr-sec / km-hr)

Time = 36,000 seconds

(That's 10 hours.)

Answer:

The ans is 1 not 2

Explanation:

The distance between two adjacent node in a stationary wave is half wavelength π/2 and not full wavelength as in π,so when solving we got 2cm as the wavelength since they ask the dist. Also adjacent nodes you will divide it by 2 and the ans will give u 1cm.

Hope this helps.