what is the length of a box in which the minimum energy of an electron is 1.4×10−18 j ?

Answers

Answer 1

The length of the box is approximately 4.05 x 10^-10 meters.

The minimum energy of an electron in a three-dimensional box of length L is given by:

E₁ = (h²/8mL²)

where h is Planck's constant, m is the mass of the electron, and E₁ corresponds to the ground state energy.

Solving for L, we get:

L = sqrt(h²/8mE₁)

Substituting the given values, we obtain:

L = sqrt((6.626 x 10^-34 J s)² / (8 x 9.109 x 10^-31 kg x 1.4 x 10^-18 J))

L = 4.05 x 10^-10 meters

Therefore, the length of the box is approximately 4.05 x 10^-10 meters.

Learn more about Energy of electron https://brainly.com/question/23729506

#SPJ11


Related Questions

A car travels around an unbanked highway curve (radius 0.15 km) at a constant speed of 25 m/s. What is the magnitude of the resultant force acting on the driver, who weighs 0.80 kN

Answers

The magnitude of the resultant force acting on the driver, who weighs 0.80 kN

What is resultant force:

The total amount of force acting on the object or body along with the direction of the body.

The formula for the resultant force vector is given by Newton's Second law.  F=ma.

here

speed, v = 25 m/s

radius, r = 0.15 km = 150 m

weight, w = 0.80 kN = 800 N

we know that,

W = m*g

800 = m * 9.8

m = 800 / 9.8

m = 81.63 kg

magnitude of the resultant force:

F = m*v^2 / r

F = 81.63 * 25^2 / 150

F = 340.13 N

F = 0.34 kN

hence,

The magnitude of the resultant force acting on the driver, who weighs 0.80 kN

Learn more about resultant force here:

https://brainly.com/question/13649876

#SPJ4

The weight of a hydraulic barber's chair with a client is 2000 N. When the barber steps on the input piston with a force of 40 N, the output plunger of a hydraulic system begins to lift the chair. Determine the ratio of the radius of the output plunger to the radius of the input piston.

Answers

Answer: The weight of a hydraulic barber's chair with a client is 2000 N. When the barber steps on the input piston with a force of 40 N, the output plunger of a hydraulic system begins to lift the chair. Then the ratio of the radius of the output plunger to the radius of the input piston will be 7.07.

Explanation: To find the answer, we have to know more about the Pascal's law and the hydraulic lift.

What is pascal's law and how it is used in case of hydraulic lift?The law states that, the pressure exerted at any point on an enclosed liquid is transmitted equally in all directions.A hydraulic lift consists of two cylinders connected to each other by pipe.If the force F1 applied on the smaller piston of area A1, the pressure exerted will be,

                            [tex]P_1=\frac{F_1}{A_1}[/tex]

By pascal's law, the pressure transmitted to the large piston of large area A2 will be,

                            [tex]P_2=\frac{F_2}{A_2}[/tex]

Then,

                          [tex]\frac{F_2}{A_2} =\frac{F_1}{A_1}[/tex]

How to solve the problem?We have to find the ratio of the radius of the output plunger to the radius of the input piston.We have the equation for this as,

                     [tex]\frac{A_{Plunger}}{A_{piston}} =\frac{F_{Plunger}}{F_{piston}}[/tex]

                    [tex]\frac{R_{Plunger}}{R_{piston}}=\sqrt{ \frac{F_{Plunger}}{F_{piston}}}=\sqrt{\frac{2000}{40} } =7.07[/tex]

Thus, we can conclude that, the ratio of the radius of the output plunger to the radius of the input piston will be 7.07.

Learn more about the Pascal's law and the hydraulic lift here:

https://brainly.com/question/28044939

#SPJ4

Write an expression for the x-component of acceleration of the given velocity field as a function of x, y, z, and/or t.

Answers

Write an expression for the x-component of acceleration of the given velocity field as a function of x, y, z, and/or t.

v={4yti-2xtj}m-s

what is acceleration vector?

We frequently wish to know an object's acceleration vector at any point along its trajectory in addition to its displacement and velocity vectors. This acceleration vector, which represents the instantaneous acceleration, may be found by taking the velocity function's derivative with respect to time, as we saw in the previous chapter. The fact that these are now vector quantities is the only variation in two or three dimensions. The same approach that was demonstrated in the previous chapter for one-dimensional motion can be used to tackle multidimensional motion with constant acceleration. As we previously demonstrated, motion in three dimensions is comparable to motion in three one-dimensional space along axes that are all perpendicular to one another.

To learn more about acceleration vector from the given link:

https://brainly.com/question/12645595

#SPJ4

While the skin has the ability to block uv light which may cause damage, it also has the ability to absorb:__________

Answers

While the skin has the ability to block UV light which may cause damage, it also has the ability to absorb Drugs.

Skin is the largest organ of the body. It is usually soft, and flexible outer tissue. It is involved in Protection, Sensation and Regulation. It has the ability to Block UV light through Melanin and it has ability to absorb drugs through the Dermal Absorption through the skin. It is porous and hence has the ability to absorb:

DrugsAcrylatesPharmaceutical productsIsocyanatesMercuryPolychlorinated biphenyls (PCB)Some nutrients like Vitamin E, Vitamin CHyaluronic acid

Hair follicles and the pores absorbs the best present all over the body.

Substances can enter the skin through openings, getting absorbed into the dermis where blood vessels nourish the skin.

Learn more about Drugs here, https://brainly.com/question/13294633

#SPJ1

Which planet has the most extreme temperature difference between day and night?

Answers

Answer:

Explanation:

Mercury, the first planet from the Sun, endures drastic temperature changes from day to night. During the day, the planet is incredibly near to the Sun, with temperatures reaching 430°C.

At the end of a quiet inspiration, an additional volume of air can be inhaled. What is this additional amount of air called

Answers

Inspiratory reserve volume is the additional amount of air that can be inhaled at the end of quiet inspiration.

Inhalation : The act of drawing air into the lungs during inspiration, also known as inhalation.

By establishing a pressure differential between the lungs and the atmosphere, it is accomplished.

The diaphragm contracts toward the abdominal cavity as air enters the lungs, creating more room in the thoracic cavity for the air to fit.

Inspiratory reserve volume is the additional volume of air that can be maximally inspired after finishing a typical, quiet inspiration.

Or the volume of air that can be inhaled following a regular breath is known as the inspiratory reserve volume.

It is denoted by IRV.

In men average IRV is 3.3 L whereas in women it is about 1.9 L

Hence, Inspiratory reserve volume is the additional amount of air that can be inhaled at the end of quiet inspiration.

Learn more about Inspiration and Expiration here https://brainly.com/question/14955835

#SPJ1

An 80,000 kg plane is flying at 900 km/h at a height of 10 kilometers. What is its total mechanical energy? Group of answer choices 478 MJ 250 MJ 10,340 MJ 773 MJ

Answers

The mechanical energy of the given flying object is 10,340 MJ. So the correct choice is 10,340 MJ.

Mechanical energy: The mechanical energy of an object is the sum of its potential energy and kinetic energy.

The formula for the mechanical energy E is:

E=K+U

where K is the kinetic energy and U is the potential energy.

Kinetic energy: The energy possessed by an object due to the motion.

The kinetic energy is given by the formula,

K=(1/2)*(mv^2)

where m is the mass of the object and v is the velocity of the object.

Potential energy: The energy possessed by an object due to its relative position from a given point.

The potential energy is given by the formula,

U=m*g*h

where g is the acceleration due to gravity and h is the height of the object from the ground.

Substitute K=(1/2)*(mv^2) and U=m*g*h in the formula of the mechanical energy to get the following formula,

E=(1/2)*(mv^2)+m*g*h

Given that m=80000 kg, h=10 km, and v=900 km/h, and the value of g is 9.8 m/s^(-2), the value of the total mechanical energy is,

E=(1/2)*(80,000 kg)(900 km/h )^2+(80,000 kg)*(9.8 m/s^(-2))*(10 km)

Note: 1 km= 1000 m and 1 km/h = 5/18 m/s. 1 MJ = 10^(6) J

E=(1/2)*(80,000 kg)*(900*(5/18) m/s )^2+(80000 kg)*(9.8 m/s^(-2))*(10000 m)

E=(1/2)*(80,000 kg)*(250 m/s)^2+7840*10^(6) J

E=2500*10^(6) J+7840*10^(6) J

E=10340*10^(6) J

E=10340 MJ

Learn more about Potential energy here:

https://brainly.com/question/15647581

#SPJ4

A group of friends wants to go to the amusement park. They have no more
than $325 to spend on parking and admission. Parking is $11, and tickets cost
$39.25 per person, including tax. Use the drop-down menu below to write an
inequality representing p, the number of people who can go to the
amusement park.

Answers

Answer:

4x + 3

Explanation:

The number of people who can go to the amusement park is 8.

What is meant by mathematical inequality ?

The mathematical expressions with inequalities are those with unequal sides on both sides. Unlike equations, we compare two values when we work with inequality.

Here,

The total amount they have, z = $325

Amount of parking charge, x = $11

Amount for ticket cost, y = $39.25

Let the number of people who can go to the amusement park be p.

So, the expression for the inequality can be written as,

x + yp = z

Applying the values of x, y and z,

11 + 39.25p ≤ 325

39.25p ≤ 325 - 11

39.25p ≤ 314

Therefore, the number of people who can go to the amusement park,

p ≤ 314/39.25

p ≤ 8

Hence,

The number of people who can go to the amusement park is 8.

To learn more about mathematical inequality, click:

https://brainly.com/question/19003099

#SPJ2

It's a duty of the AHJ to

A. make revisions to the Code.
B. interpret NEC rules.
C. review installation designs and determine if they fall under Code jurisdiction
D. ensure the suitability of installations for future expansion.

Answers

The duty of the AHJ is to: (C). review installation designs and determine if they fall under Code jurisdiction

Meaning of AHJ

AHJ can be defined as that means Authority Having Jurisdiction

AHJ can be defined as an organization, office, or individual that are responsible for the issuance of permits, enforcing the requirements of a code or standard and  approving materials or a procedure.

In conclusion, The role of the AHJ are outlined in the paragraph above.

Learn more about Jurisdiction: https://brainly.com/question/10377896

#SPJ1

According to the superstring theories, gravitation has its own energy-sharing particles called _____, analogous to photons and electromagnetism.

Answers

Graviton

Graviton, postulated quantum that is thought to be the carrier of the gravitational field. It is analogous to the well-established photon of the electromagnetic field.

What is Superstring theories ?

String theory states that everything in our Universe is made up of tiny vibrating strings. These strings are one dimensional objects and are identical to one another.

Every fundamental particle that we know such as electrons, quarks, photons, gluons, etc are made up of these strings.

String theory has contributed a number of advances to mathematical physics, which have been applied to a variety of problems in black hole physics, early universe cosmology

Learn more about Superstring theories here:

https://brainly.com/question/7538238

#SPJ4

Describe 4 criteria you would use to compare energy sources.

Answers

The  4 criteria you would use to compare energy sources are;

1. It is necessary to assess whether or not they are renewable.

2. It is necessary to be aware of the amount of energy that is provided per energy source unit.

3. You have to be aware of how risky it is to utilize different types of energy sources.

4. It is necessary to be aware of the effects that various types of energy sources have on the surrounding environment.

This is further explained below.

What are energy sources.?

Generally,  A source from which energy that may be used can be collected or recovered, either directly or by means of a process of conversion or transformation

In conclusion, 1. You must decide if they are renewable or not.

2. You must be aware of the amount of energy provided per unit of energy source.

3. You must be aware of the safety of using various energy sources.

4. Need to understand how various energy sources affect the environment.

Read more about energy sources.

https://brainly.com/question/10841575

#SPJ1

Use the periodic table to answer this question.
Decomposing calcium carbonate yields calcium oxide and carbon dioxide.
What information is needed to calculate the mass of calcium oxide that can be produced from 4.7 kg of calcium carbonate?

A.molar masses of calcium, carbon, and oxygen
B.the balanced chemical equation
C.number of molecules of calcium carbonate
D.molar mass of calcium carbonate

Answers

You need the atomic mass of calcium, oxygen and carbo, the balanced chemical equation and the molar ratio between Calcium carbonate and calcium oxide.

1. If you know the atomic mass of the elements, you can calculate the molar mass of Calcium Carbonate (CaCO3) and the mass of Calcium Oxide (CaO).

2. The balanced equation is CaCO3 -> CaO + CO2

3. The molar ratio between CaCO3 and CaO is 1:1, which means that the descomposing of one mole of calcium carbonate produce one mole of calcium oxide.

4- The last thing you should do is to conver the 4.7 kg of CaCO3 to moles and with the molar ratio calculate the mass of CaO

Explanation:

Any confusions you may ask!

If the freezing point of all ices was at a much lower temperature, what change would that imply for the formation of our solar system?

Answers

The gas giants would have to form at a larger distance from the sun this change would that imply for the formation of our solar system.

Why do gas giants form further from the Sun?

The larger gas and ice giants have a tendency to form further from the Sun because the regions closer to the Sun are too warm for the lighter gases to condense there. The gas giants' primary characteristic is their extreme distance from the Sun. Because of this, these planets kept the majority of the gas and volatiles that made up the majority of the proto-solar nebula throughout the formation of the Solar System.

In the gas-rich debris disk that envelops a newborn star, gas giants may form. Asteroids and comets collide to form a core, and once this core reaches a certain mass, its gravitational pull quickly pulls gas from the disk to form the planet.

Learn more about gas giants here:

https://brainly.com/question/11862047

#SPJ1

A 5.0-kg bar of lead is placed inside a 12-L chamber filled with helium gas. The temperature of the lead and helium is the same. How do the average kinetic energies of the lead atoms and helium atoms compare

Answers

As the temperature of the lead and helium is the same. Thus the average kinetic energy is also the same for lead and helium.

Reason:

It is given that a 5.0-kg bar of lead is placed inside a 12-L chamber filled with helium gas. The temperature of the lead and helium is the same. It is required to compare the average kinetic energy of the lead atoms and helium atoms.

The average kinetic energy is calculated as, [tex]K=\frac{3}{2} \frac{R}{N} T[/tex].

Here K is the average kinetic energy,  R is the gas constant, N is the Avogadro's number, and T is the temperature.

As the temperature is the same for both lead and helium. As a result, the average kinetic energy is also the same for lead and helium.

Learn more about average kinetic energy here,

https://brainly.com/question/1599923

#SPJ4

A 500 watt heater carries a current of 4 A. What is the voltage across the ends of the heating element

Answers

The voltage across the ends of the heating element is 125 volts.

Voltage

Power = 500J/s = 500 Watts. I = 4A

V*I = 500

V = 500/I = 500/4 = 125 Volts.

The difference between two points' electric potentials, also known as electric potential difference, electric potential pressure, or electric tension, is what moves a test charge between the two points in a static electric field. The derived unit for voltage (potential difference) in the International System of Units is called volt. 166 Work per unit charge is stated in SI units as joules per coulomb, with 1 volt equaling 1 joule (of work) for 1 coulomb (of charge). The quantum Hall and Josephson effect was first used to define the volt in the old SI system in 1990. More recently, fundamental physical constants have been included to the definition of the volt in the new SI system.

Learn more about voltage here:

https://brainly.com/question/2364325

#SPJ4

A banked circular highway curve is designed for traffic moving at 60 km/h. The radius of the curve is 200 m. Traffic is moving along the highway at 40 km/h on a rainy day. What is the minimum coefficient of friction between tires and road that will allow cars to take the turn without sliding off the road

Answers

The minimum coefficient of friction which allow cars to take the turn without sliding off the road is 0.617

What is friction force:

Friction is the force resisting the relative motion of the surface sliding against each other.

here, given that

m = mass of car

The velocity of the cars, v= 60 km/h = 17 m/s

The radius of the curve, R =200 m.

The velocity of the cars on the highway curve, v' = 40 km/h = 11 m/s

In order to allow the cars to take the turn without sliding off the road, the Centripetal Force must be equal to the frictional force between the tires  of the car and road.

Centripetal Force = Frictional Force

centripetal force = mv²/r friction force = μR

mv²/r = μR

here

R = Normal Reaction = Weight of Car = mg

Therefore,

mv²/r = μmg

μ = v²/gr

μ = (11)² / (9.8)(200)

μ = 0.0617

hence

The minimum coefficient of friction which allow cars to take the turn without sliding off the road is 0.617

Learn more about coefficient of friction here:

https://brainly.com/question/13754413

#SPJ4

When a car driving up a hill with constant speed: I. its kinetic energy is decreasing. II. its potential energy is constant. III. its total mechanical energy is constant. Group of answer choices II I III none of the above

Answers

A car driving up a hill at a constant speed experiences no change in its kinetic energy while it's potential energy increases with increasing height, thus none of the options are correct.

Understanding the concept

Consider a car moving up the hill at a constant speed as shown in the figure below. The following forces act on the car:

N is the normal reaction force acting in an upward directionf_s is the static friction force exerted due to friction between the road and the tires of the carf_k is the rolling friction force in the direction opposing that of the  tiremg is the force acting in a downward direction.θ is the angle of inclination.

Here as the car is moving up the hill at a constant speed, the net force exerted on the car is zero. Also, the kinetic energy of the car will not change as its velocity is constant and the potential energy will change with increasing height. Thus, none of the given options are correct.

Learn more about motion on an incline here:

https://brainly.com/question/13513083

#SPJ4

what's an electric field ?​

Answers

Answer:

Electric field is defined as the electric force per unit charge. Light, X- rays, radio waves, microwaves etc. contains electric field component's in it.

Explanation:

Answered by :

[tex] \pink{ \star} \pmb{ \text{ \pink{seolleaphrodite }}} \pink\star[/tex]

Answer:

a region around a charged particle or object within which a force would be exerted on other charged particles or objects.

you are the person in charge of building a nuclear power plant in florida. your first choice is to select a

Answers

Answer: you are the person in charge of building a nuclear power plant in Florida. your first choice is to select a site for building the power plant.

Explanation: To find the answer, we need to know more about the nuclear power plants and the criteria to select the site for power plant.

What you mean by nuclear power plants?Nuclear power can be defined from the nuclear fission reaction.These power plants will heat the water to produce steam and this steam is used to spin large turbines and thus generates electricity.How to select the site for nuclear power plant?We have to consider the following things,keep distance from populated area.distance from load center.Accessibility to site.Water availability and fuel availability.waste disposal.

Thus, we can conclude that, before building a nuclear power plant, our first choice should be to select a site.

Learn more about the nuclear power plants and the criteria to select the site for power plant here:

https://brainly.com/question/28045272

#SPJ4

How to change a flat tire presentation?

Answers

Having a flat tire is one of the predominant inconveniences of riding. A guide car jack is designed to raise the vehicle high sufficient to eliminate the flat tire.

Converting a tire is definitely an alternative bodily trauma. we need to place a few muscles in getting the lug nuts off and cranking the jack, after which you need to bend down and lift the tire. regularly, oldsters will try to do all of this in a rush to get on their way, however, it really is a mistake.

To change eliminate the flat tire. The following steps should be followed:-

A spare tire. A lug wrench or torque wrench.Wheel wedges.A transportable tire inflator.A tire gauge to read the endorsed tire strain.

Having a flat tire is one of the predominant inconveniences of riding. while a terrific spare is unavailable, you both have to call a tow truck or repair the tire ourselves. luckily, the process of fixing it yourself is noticeably sincere and requires only a few gears.

Learn more about changing a flat tire here:-https://brainly.com/question/16264897

#SPJ4

Explain how energy balance sets planetary temperature? Imagine a planet colder than expected for energy balance and explain why it warms up just enough to achieve energy balance but no more (assume no greenhouse gases).

Answers

The planetary temperature energy balance is obtained by radiating back the absorbed radiation energy from outer-space, by the planet and thus acquiring thermal equilibrium.

What is the process of attaining thermal equilibrium by Earth?

The Stefan-Boltzmann law states that the more the temperature a planet has, the more it will radiate out to reach thermal equilibrium.

We know that outer space contains large masses of radiative energy freely distributed in its vast expanse. A small fraction of this energy is absorbed by the Earth through the atmosphere, surface land, clouds etc.

Now, radiative balance is achieved when a planet's surface continuously warms up until it reaches its peak at which point the same amount of absorbed energy can then be radiated back to space. The relative amount of energy radiated back by a planet is dependent upon the size of the planet.

A colder planet relatively absorbs lower amount of radiation energy from space. In some time, as the planet heats up enough, the energy is radiated back to the space attaining thermal equilibrium.

Learn more about Stefan-Boltzmann law here:

https://brainly.com/question/14919749

#SPJ4

what is coulomb law explain it

Answers

Coulomb law  depicts the mathematical relationship between the electric force and the charged objects.

What is Coulomb law?

This law states that the electric force is directly proportional to the product of the charged objects.

The electric force is also inversely proportional to the square of the distance between the charges and is denoted below:

F= kq1q2/ r²

where :

F=electric force

k=Coulomb constant

q1, q2=charges

r=distance of separation

Read more about Coulomb law here https://brainly.com/question/506926

#SPJ1

Calculate the “index of refraction” of a medium where the speed of light through it is 1.24 x 108 m/s. Use the GRASS method, write your solution on paper and insert an image of it below

Answers

The index of refraction of the medium where the speed of light is 1.24× 10⁸m/s, is 2.42.

To find the answer, we need to know about the relation between the refractive index and velocity of light.

What's the the expression of refractive index of a medium in term of velocity of light?Refractive index of any medium (n)= C/VC= speed of light in vaccum which is 3×10⁸ m/s , V = velocity of light in the medium

What's the refractive index of a medium in which speed of light is 1.24 x 10⁸ m/s?

Refractive index of the medium =

3×10⁸/1.24 x 10⁸

= 2.42

Thus, we can conclude that the refractive index of the medium is 2.42.

Learn more about the refractive index here:

brainly.com/question/83184

#SPJ1

What is the lowest acceptable overvoltage category rating for an ammeter that will be used to test outdoor conductors

Answers

CAT IV is the lowest acceptable overvoltage category rating for an ammeter.

What is CAT IV rating?

According to IEC 1010 and UL61010-1 standards, the overvoltage installation categories for low voltage systems of less than 1000 Volts test equipment are described by the CAT III & IV ratings. This describes a component's capacity to withstand transient or impulsive voltage. Our voltage indicators meet the necessary standards to be utilized as permanently mounted test equipment for fixed installations such switchgear, MCCs, bus and feeder in industrial plants, and low voltage connections to utility power.

A component can be positioned or utilized further downstream from the voltage source the lower the number, which also indicates how much less impulse it can withstand. Installation at the origin or at the utility level falls under CAT IV, the highest classification. Our products have a 600V at CAT IV. 

Learn more about ammeter here:

https://brainly.com/question/13162074

#SPJ4

2. What is the structure of electric circuits? Can a branch of a circuit contain three elements? Can there be a branch which doesn’t contain any circuit elements21?

Answers

First electric circuit means, the circuit has elements like resistors, capacitors, and inductors along with sources. Any electric circuit comprises nodes, branches, and meshes.

The joining point of two elements is called a node. The element between two nodes is called a branch. In branch, only one series element is possible to connect but in parallel, it can have N number of elements. No branch without elements in electric circuits.

A resistor is an electrical aspect that limits or regulates the go with the flow of electrical modern-day in a digital circuit. Resistors can also be used to offer a selected voltage for an energetic device together with a transistor.

The resistor is described as. A passive electrical issue with two terminals that can be used for both limiting or regulating the glide of electric contemporary in electric circuits. the main cause of the resistor is to lessen the modern-day go with the flow and to lower the voltage in any unique part of the circuit.

A resistor works by using proscribing the float of current, it may try this in one in all 3 approaches: first off, by using a much less conductive cloth, secondly by making the conductive fabric thinner, and sooner or later by making the conductive fabric longer.

Learn more about resistors here: https://brainly.com/question/14883923

#SPJ4

Example of a solid that sunlines is ( ? )

Answers

An example of a solid that sunlines is a billboard.

What is a billboard?

A billboard simply refers to a very large board which is usually, frequently and most of the time used for displaying advertisements

So therefore, an example of a solid that sunlines is a billboard

Learn more about billboard:

https://brainly.com/question/26961773

#SPJ1

If I connect an inductor (L) to a capacitor (C), I will get an LC oscillator circuit with some natural frequency omega. If I were to quadruple the capacitance of the circuit, what would be the new natural frequency

Answers

The new natural frequency would be ω/2.

we know that,

[tex]f = \frac{1}{2 pi \sqrt{LC} }[/tex] = ω.       -> equation 1

now, when capacitance is quadrupled,

[tex]f' = \frac{1}{2 pi \sqrt{L ( 4C )} }[/tex]

[tex]f' = \frac{1}{2 pi (2)\sqrt{LC} }[/tex].           -> equation 2

substituting value of equation 1 in equation 2 , we get,

[tex]f' = \frac{w}{2}[/tex]

Hence, the new natural frequency of the circuit is ω/2.

what do you mean by frequency ?

The resonant frequency for a particular circuit is the frequency at which this equality stands true. Where L is the inductance in henries and C is the capacitance in farads, this is the  LC circuit's resonant frequency.

Learn more about frequency here:-

https://brainly.com/question/12530980

#SPJ4

If the lens in a person's eye is too highly curved, this person is suffering from?

Answers

If the lens in a person's eye is too highly curved, this person is suffering from: nearsightedness.

lens is a piece of transparent material (such as glass) that has two opposite regular surfaces either both curved or one curved and the other plane and that is used either singly or combined in an optical instrument for forming an image by focusing rays of light.

The lens is used to form an image of an object by focusing rays of light from the object.

Various types of lenses are :

Concave lens.Convex lens.Plano lens.

learn more about  lens here

https://brainly.com/question/9757866

#SPJ4

The position of a car at time t is given by the function p(t)=t2 2t−4. What is the velocity when p(t)=11? assume t≥0

Answers

The velocity when function p(t)=11 is 8 .

According to the question

The position of a car at time t  represented by function :

[tex]p(t)=t^{2} +2t-4[/tex]

Now,

When  function p(t) = 11 , t will be

[tex]p(t)=t^{2} +2t-4[/tex]

11 = t²+2t-4

0 = t² + 2t - 15

or

t² +2t-15 = 0

t² +(5-3)t-15 = 0

t² +5t-3t-15 = 0

t(t+5)-3(t+5) = 0

(t-3)(t+5) = 0  

t = 3 , -5  

as t cannot be -ve as given ( t≥0)

so,

t = 3

Now,

the velocity when p(t)=11

As we know velocity = [tex]\frac{position}{time}[/tex]

therefore to get the value of velocity from  function p(t)

we have to differentiate the function with respect to time

[tex]\frac{d(p(t))}{dt} =\frac{d}{dt} (t^{2} +2t-4)[/tex]

v(t) = 2t + 2  

where v(t) = velocity at that time

as t = 3 for  p(t)=11  

so ,

v(t) = 2t + 2  

v(t) = 2*3 + 2  

v(t) = 8

Hence, the velocity when function p(t)=11 is 8 .

To know  more about function here:

https://brainly.com/question/12431044

#SPJ4

In example 18. 4 of the text, the deflection angle of the laser beam as it exits the prism is 22. 6º. If the prism had been made of glass instead of polystyrene plastic, what would the deflection angle have been?.

Answers

The deflection angle would have been 37.29º if the prism had been made of polystyrene plastic.

What is the deflection angle?

A deflection angle is an angle between the onward extension of the previous leg and the line ahead.

Here,

deflection angle as laser enters the beam, B = 22.6º

refraction index of glass, n1= 1.52

refraction index of polystyrene plastic, n2 = 1.59

for the second surface,

B  = 45º - 22.6º

B  = 22.40º

According to Snell's law:

n1 sinФ1 = n2 sinФ2

sin B / sinФ = n1 / n2

sinФ = (sin 22.40º) * ( 1/ 1.59)

Ф = 37.29º

Thus,

The deflection angle would have been 37.29º if the prism had been made of polystyrene plastic.

Learn more about deflection angle here:

https://brainly.com/question/22953155

#SPJ4

Other Questions
_____ refers to the process of collecting the outcomes needed to determine whether training is effective. On Friday a local hamburger shop sold a combined total of 460 hamburgers and cheeseburgers The number of cheeseburgers sold was three times the number of hamburgers sold how many hamburgers were sold Friday How do i plot 3 points on a graph when all I am given is "x=4" ? and I need to find "x and y" for 3 points. What are the symptoms and long-term complications of genital human papillomavirus (HPV)? Most people with HPV never develop symptoms, but sometimes the infection can develop into genital warts, cervical cancer, or other genital cancers. Many people with HPV have few or no symptoms, but sometimes the infection spreads to cause serious issues with the nervous system or circulatory system. Symptoms include fever, swollen glands, headaches, and fatigue; when the infection is left untreated, it can cause serious issues like cancer and even stroke. Symptoms include joint pain, headaches, and abdominal pain; when the infection is left untreated, it can lead to serious issues like heart disease or cancer. What does the out of Africa theory maintain? In a calorimetry experiment 2.50 g of methane is burnt in excess oxygen. 30% of the energy released during the combustion is absorbed by 500 g of water, the temperature of which rises from 25C to 68C. The specific heat capacity of water is 4.184 J/gC. What is the total energy released per gram of methane burnt? In Center City, the ratio of people to dogs is 4:1, and the ratio of dogs to cats is 3:2. What is the ratio of people to cats? Which combination of alleles are always involved in the inheritance of a sex-linked trait?heterozygous alleleshomozygous allelesalleles that are carried on X and Y chromosomesalleles that are carried on all chromosomes except the X and Y chromosomes Psychomotor slowing is a good predictor of cognitive performance in older adulthood: _________ A projectile leaves the ground at an angle of 60 the horizontal.Its kinetic energy is E.Neglecting air resistance, find in terms of E its kinetic energy at the highest point of the motion A scientific law is a statement of fact that describes an action or set of actions. Laws are accepted as fact because they are always observed to be true. Examples of scientific laws are Newton's laws of motion. These laws describe the motion of moving objects. a) Give an example of a scientific law you have studied or heard of. b) How do you know that this is a law in scientific terms? Read through the definition of law in the question above. The sine, cosine, cosecant, and secant functions have period _______; the tangent and cotangent functions have period _______. 15) Allie Young has to get a new car because someone hit and destroyed her old one. She feels she can afford topay $90 each month, and the best loan terms she has found offer her an 8.33 percent interest rate on a 4-yearloan. What is the maximum value of the car Allie should be looking for? Give answer to nearest hundred dollars.a.) $3900b.) $3800c.) $3600d.) $3700 (HC)Why did Civil Rights leaders expect that World War II would help their movement reach its goals more quickly? African Americans were strong supporters of the war effort. African Americans joined unions in large numbers during the war. African American leaders agreed not to hold protests until the war was over. African Americans moved back to farms in the South in large numbers during the war. Write an equation of the line passing through the point (8, 2) that is parallel to the line 6x - 9y = -7. The line plot shows the prices of sunglasses at a department store.a. Find the mean, median, and mode.b. Which measure best describes the data? Why?c. Which measure might be misleading in describing the average price of sunglasses? Explain your reasoning. What ratios are equivalent to 12:9 10 points please help me this year you have decided to focus your efforts on marketing to employer group plans. one employer Use homeostasis to explain why you might throw up if you eat food that has gone bad.