Answer:
A. 2,3-dimethylpentane
Explanation:
edge 2022
Hydrocarbons are the simplest compound containing carbon and hydrogen in their molecular structure. 2, 3 dimethyl pentane is correct.
What is hydrocarbon ?Hydrocarbons are the simplest compound containing carbon and hydrogen in their molecular structure. There are four types of hydrocarbon as follows
Alkanes, alkenes, alkynes and aromatic hydrocarbons. Alkane contai carbon carbon single bond in their structure .Alkene containing carbon carbon double bond in their structure while alkynes contain carbon carbon triple bond in their structure.
Aromatic hydrocarbon contain benzene ring in their structure. Benzene is the example of aromatic hydrocarbon. Aromatic hydrocarbons are used as paint removal and are also used as a solvents.
Thus, 2, 3 dimethyl pentane is correct . It is a hydrocarbon containing carbon and hydrogen in their structure.
To learn more about hydrocarbon follow the link below;
https://brainly.com/question/17578846
#SPJ5
How does the temperature of water change when it is placed in a freezer and
then begins to freeze?
A: It decreases first and then increases.
B. It increases first and then remains constant.
C. It decreases first and then remains constant.
D. It increases first and then decreases.
Answer:
It decreases first and then remains constant.
Explanation:
Answer:
It decreases first and then remains constant.
Explanation:
What type of chemical reaction is the following: CH4 + O2 ➜ CO2 + H2O
Complete combustion of an alkane (methane)
You're essentially burning CH4 in the excess presence of oxygen gas, which results in the liberation of water and carbon dioxide
Students put a ballon on a top of a bottle of water. The students placed the bottle in a container of very hot water and the ballon began to expand. A) All of the water evaporated B) The gas in the bottle expanded as it became warmer C) Some of the gas in the bottle condensed to liquid water D) the water expanded into the ballon as it became warmer
Answer:
b
Explanation:
When an object moves, stops moving, changes speed, or changes direction, how do
scien sts describe that condition?
Zi notices the spilled product, and comments that it looks different from the original ingredients. Carlotta explains that all substances have distinctive physical and chemical properties; for example, _____ are examples of physical properties.
Density, Melting point, Boiling point and Hardness are examples of physical properties.
What is physical properties?A physical property refers to that property which is measurable and whose value indicates a state of a physical system. Examples of physical properties are Density, Melting point, Boiling point and Hardness so we can conclude that Density, Melting point, Boiling point and Hardness are examples of physical properties.
Learn more about physical properties here: https://brainly.com/question/17436856
A 65.0 g sample of copper (specific heat = 0.20 J/g °C) is heated to 97.6 °C and then
placed in a container of water at 20 °C. The final temperature of the water and copper is
24.9 °C. What is the mass of the water in the container, assuming that all the heat lost
by the copper is gained by the water?
A 65.0 g sample of copper at 97.6 °C is added to 46.1 g of water at 20 °C, reaching a final temperature of 24.9 °C.
What does the law of conservation of energy state?In physics and chemistry, the law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.
Step 1: Calculate the heat lost by the sample of copper.A 65.0 g (m) sample of copper is cooled from 97.6 °C to 24.9 °C. Given that its specific heat (c) is 0.20 J/g.°C, we can calculate the heat (Q) lost using the following expression.
Q(Cu) = c(Cu) × m(Cu) × ΔT
Q(Cu) = (0.20 J/g.°C) × 65.0 °C × (24.9 °C - 97.6 °C) = -945 J
Step 2: Calculate the heat gained by the water (Qw).We will use the law of conservation of energy.
Qw + Q(Cu) = 0
Qw = -Q(Cu) = 945 J
Step 3: Calculate the mass of water.We will use the same expression as in Step 1.
Qw = c(w) × m(w) × ΔT
m(w) = Qw / c(w) × ΔT
m(w) = 945 J / (4.18 J&g.°C) × (24.9 °C - 20 °C) = 46.1 g
A 65.0 g sample of copper at 97.6 °C is added to 46.1 g of water at 20 °C, reaching a final temperature of 24.9 °C.
Learn more about specific heat here: https://brainly.com/question/16559442
Please help meee ( please answer all )
Answer:
Au = Element
NaCl = Compound
Salad = Heterogeneous
NaCl & Water = Homogeneous
3. in a purity check for industrial diamonds, a 10.25 degrees carat (1carat = 0.2000g) diamond is heated to 74.21 °c and immersed in 26.05 g of water in a constant pressure calorimeter. the initial temperature of the water is 27.20 ^ c . the final temperature of the system is 27.65 °c. calculate the specific heat of the diamond.
From the calculations, the specific heat capacity of diamond is 42.36 J/Kg/°C.
What is specific heat capacity?The specific heat capacity is the heat absorbed or emitted when 1Kg of a susbtance is heated such that its temperature is increased by 1 K.
Now;
Mass of water = 26.05 g or 0.026 Kg
Mass of diamond = 2.05 g or 0.00205 Kg
specific heat capacity of water = 4200 J/Kg/°C
specific heat capacity of diamond = ?
Initial temperature of water = 27.20°C
Initial temperature of diamond =74.21 °c
Final temperature of the diamond and water = 27.65 °c
Heat lost by diamond = heat gained by water
mcdT = mcdT
0.00205 Kg * c * ( 74.21 °c - 27.65 °c ) = 0.026 Kg * 4200 J/Kg/°C * (27.65 °c - 27.20°C)
0.116c = 4.914
c = 4.914/0.116
c = 42.36 J/Kg/°C
Learn more about specific heat capacity: https://brainly.com/question/2530523
Choose the atom or ion that is larger.
Select one:
a. S
b. S-2
Answer:
In general, anions are larger than the corresponding neutral atom, since adding electrons increases the number of electron-electron repulsion interactions that take place. Cations are smaller than the corresponding neutral atoms, since the valence electrons, which are furthest away from the nucleus, are lost.
Explanation:
The ion S⁻² (sulfide ion) is larger than the atom S (sulfur atom).
b. S⁻²
Atoms are composed of a nucleus at the center, containing protons and neutrons, and a cloud of electrons surrounding the nucleus. The size of an atom is determined mainly by the arrangement and energy levels of its electrons.
When an atom gains electrons to become an ion, it undergoes a process called electron gain or electron attachment. In this case, sulfur (S) has six valence electrons (electron configuration: 1s² 2s² 2p⁶ 3s² 3p⁴). It tends to gain two electrons to achieve a stable electron configuration similar to the nearest noble gas, argon (Ar: 1s² 2s² 2p⁶ 3s² 3p⁶). By gaining two electrons, sulfur forms the sulfide ion (S⁻²), which has an electron configuration of 1s² 2s² 2p⁶ 3s² 3p⁶.
When an atom gains electrons to become an ion, it forms a negatively charged ion, and this is the case for S⁻². The extra electrons in the ion's electron cloud cause repulsion, leading to an increase in the ion's size compared to the neutral atom. In other words, the addition of two extra electrons in the S⁻² ion increases its electron cloud's size, making it larger than the S atom.
Learn more about sulfide ion from the link given below.
https://brainly.com/question/25158876
#SPJ2
Seesee said it would be fun to travel 134 km/h. If she was able to drive that fast for 7.5 h, how far would she have traveled?
Answer:
The answer is 1005 kmExplanation:
The distance covered by an object given it's velocity and time taken can be found by using the formula
distance = velocity × timeFrom the question
velocity = 134 km/h
time = 7.5 hr
We have
distance = 134 × 7.5
We have the final answer as
1005 kmHope this helps you
How much heat is released as the temperature of 465 g of water drops from 75.0°C to 18.2°C?
The heat released : -110560.632 J
Further explanationHeat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
Knownm =465 g
c water = 4.186 J/gram °C
∆T = temperature difference = 18.2 - 75 = - 56.8 °C
Then the heat :
[tex]\tt Q=m.c.\Delta T\\\\Q=465\times 4.186\times -56.8\\\\Q=\boxed{\bold{-110560.632~J}}\rightarrow -=exothermic[/tex]
I need help filling out this table, please help ASAP
Answer:
A-20 B-40 C-Ca D-10 E-9 F-F
Explanation:
----------------------------------------------atomic number= no.of protonsand mass no.= no. of protons+no. of neutrons__________________________A= 20B= 40C= caD= 10E= 9F=FMatch the following.
1.
an agreement to temporarily cease fighting
recession
2. an economic setback in commercial and industrial activity
reparations
3. indemnities paid by defeated countries for acts of war
armistice
Answer:
The answer is number 1
Explanation:
this is because cease means to stop,and recession also means to squeeze
The end of one bar magnet is placed near the end of another bar magnet. The two ends seem to push each other apart. Which of these statements is true?A.The two ends are like poles.B.The two ends are unlike poles.C.There are like charges on the two ends.D.There are unlike charges on the two ends
Answer:
A.The two ends are like poles
Explanation:
Magnets are composed of a north pole and a south pole. If two like poles of a magnetic are placed near each other, the two ends seem to push apart.
The reason for this is that, when like poles of two magnets are made to face each other, the lines of forces are in opposite directions, hence the magnets repel.
If unlike poles of two bar magnets are made to face each other, the magnetic lines of force are now in the same direction therefore the unlike poles attract each other.
Which term refers to the number of moles of solute per liter of solution?.
Answer:
Molarity I believe
If a sound wave speeds up and its frequency does not change, what happens to the wavelength?
Answer: No, the speed of propagation is constant in a given medium; only the wavelength changes as the frequency changes.
Explanation:
Study the reaction.
2H2 + O2 + 2H20
What is the mole ratio for the reaction between oxygen (O2) and hydrogen (Hz)?
O 2 oxygen to 1 hydrogen
O 1 oxygen to 2 hydrogen
O 4 oxygen to 2 hydrogen
O 2 oxygen to 2 hydrogen
HELPPP
If you zoom all the way in, what is the smallest object on the head of the pin?
when was the first light bulb made?
Answer:
1802
Explanation:
Humphry Davy invented the first electric light
Answer:
1806
Explanation:
The very first light bulb was not invented by Thomas Edison, but by British inventor Humphry Davy in 1806. His devices created an arc of electricity between electrodes, creating a very bright light. While far too dangerous to use at home, they were used in public spaces and commercially.
Hope this helps! :)
PLEASE MARK ME AS BRAINLIEST I REALLY WANT TO LEVEL UP
Which has the highest viscosity? Why? water b. tea c. milk d. honey
Answer:
Honey
Explanation:
i know why but at the same time i don't. i know that water, tea, and milk are very fluid however honey is sticky and isn't AS FLUID as the others.
Therefore, honey as the highest viscosity.
Elements in the same period have the same ________________________.
Wat helps measure 26 ML of a liquid
Answer:
6 liquids
Explanation:
because yea
Graduated cylinder is used for accuracy
1. What is a metal replacement reaction?
Answer:
a reaction in which one element is substituted for another element in a compound
Explanation:
To make the future development more eco-friendly and decrease soil erosion,
choose one of the following recommendations:
Answer:
build better enclosures to decrease overgrazing by livestock.
Explanation:
Does the metals determine how high or low voltage is in fruit battery?
Or is it the pH level in fruits that determines voltage? also can you give a source to this.
Answer: 1.788 volts.
Explanation:
To solve this problem we can combine battery cells to create higher voltages. Building more lemon batteries and connecting them with a metal wire from "+" to "-" adds the voltage from each cell. The two lemon batteries above, combine to produce a voltage of 1.788 volts.
A solution of naoh has a concentration of 25% by mass. what mass of naoh is present in 0.250 g of this solution? use the periodic table in the toolbar if needed. g
The mass of NaOH present in the solution is, 0.0625 grams
What will be the Mass?The mass is defined as the quantity of the matter present in the solution or in any substance.
Given that,
Mass % of NaOH in the solution= 25 %
Mass of solution = 0.250 g
The formula will be
[tex]\rm Mass\ percent=\dfrac{mass \ of\ NaOH}{Mass\ of\ solution} \times 100[/tex]
[tex]25=\dfrac{\rm Mass\ of \ NaOH}{0.250} \times 100[/tex]
Mass of NaOH=0.0625 gram
Thus the mass of NaOH present in the solution is, 0.0625 grams
To know more about concentration follow
https://brainly.com/question/17206790
The mass of NaOH present 0.250 grams of solution is 0.0625 grams.
How we calculate the mass?Mass of any substance present in any solution will be calculated by using their & mass as below:
Mass percent = (Mass of solute / Mass of solution) × 100
Given items according to the question,
% mass of NaOH = 25%
Mass of solution = 0.250g
Now e put these values on the above equation and we get,
Mass of NaOH = (5 × 0.250) / 100 = 0.0625 grams.
Hence, mass of NaOH is 0.0625 grams.
To know more about % mass, visit the below link:
https://brainly.com/question/10031774
Which of theses best explains whether alchemy is a science or pseudoscience?
Help Please
10.
In order to do work on an object, what is true about the force that must be exerted?
The force must be in a direction opposite to Earth’s gravitational force.
The force must be the maximum amount of force one is able to exert.
The force must be in the same direction as the object’s motion.
The force must be quick and deliberate.
Answer:
The force must be in the same direction as the object’s motion
Explanation:
Force is a physical quantity.
It is defined as the force applied to a body to move it in the direction of the force applied.
Force = mass x acceleration.
Force results in the acceleration of a body. Force causes the change in position of a body and it moves it towards the direction of the applied force. A force is a vector quantity having both magnitude and direction.So, option is C is the correct choice.
The boiling points of different substances are given in the table below.
Substance
Boiling point (°C)
Acetic acid
118.1
Benzene
80.2
Chloroform
61.2
Water
100.0
Which substance most likely has the strongest intermolecular forces?
acetic acid
benzene
chloroform
water
Answer:
A) acetic acid
Explanation:
Acetic acid most likely has the strongest intermolecular forces. Hence, option A is correct.
What is the boiling point?The boiling point of a substance is the point at which the vapour pressure of a liquid is equal to the surrounding pressure and water is 313k for absolute temperature and 212°F for Fahrenheit.
The intermolecular force of attraction depends on the strength or extent of Hydrogen bonding present in a substance.
Benzene and chloroform do not have hydrogen bonding being non-polar molecules.
Water has hydrogen bonding being polar.
However acetic acid being the most polar has the maximum hydrogen bonding.
Thus acetic acid has the strongest intermolecular forces of attraction.
Learn more about a boiling point here:
brainly.com/question/14771622
#SPJ2
Explain why the equation ( x - 4 ) ^2 - 28 =8 has two solutions. Then solve the equation to find the solutions. Show your work. ( Will Mark Brainliest). Please only answer if you are 100% sure.
Taking into account the discriminant and quadratic formula:
As Δ> 0 the function has two real roots or solutions.The solutions are x1= 10 and x2= -2.Zeros or solutions of a function
The points where a polynomial function crosses the axis of the independent term (x) represent the so-called zeros of the function.
That is, the zeros represent the roots of the polynomial equation that is obtained by making f(x)=0.
In summary, the roots or zeros of the quadratic function are those values of x for which the expression is equal to 0. Graphically, the roots correspond to the abscissa of the points where the parabola intersects the x-axis.
DiscriminantThe function f(x) = ax² + bx + c
with a, b, c real numbers and a ≠ 0, is a function quadratic expressed in its polynomial form (It is so called because the function is expressed by a polynomial).
The following expression is called discriminant:
Δ= b²- 4×a×c
The discriminant determines the amount of roots or solutions of the function.
Then:
If Δ <0 the function has no real roots and its graph does not intersect the x-axis.If Δ> 0 the function has two real roots and its graph intersects the x-axis at two points.If Δ = 0 the function has a real root and its graph intersects the x-axis at a single point that coincides with its vertex. In this case the function is said to have a double root.Amount of solutions of function (x - 4)² - 28 =8The function (x - 4)² - 28 =8 can be expressed as:
(x - 4)² - 28 -8= 0
(x - 4)² - 36= 0
x²- 8x + 16 - 36= 0
x²- 8x + 16 - 36= 0
x²- 8x - 20= 0
Being:
a= 1b= -8c= -20the amount of solutions are calculated as:
Δ= (-8)²- 4×1×(-20)
Δ= 144
As Δ> 0 the function has two real roots or solutions and its graph intersects the x-axis at two points.
Solutions of a cuadratic functionIn a quadratic function that has the form:
f(x)= ax² + bx + c
the zeros or solutions are calculated by:
[tex]x1,x2=\frac{-b+-\sqrt{b^{2}-4ac } }{2a}[/tex]
Solutions of function (x - 4)² - 28 =8The function (x - 4)² - 28 =8 can be expressed as x²- 8x - 20= 0
Being:
a= 1b= -8c= -20the solutions of the function are calculated as:
[tex]x1=\frac{-(-8)+\sqrt{(-8)^{2}-4x1x(-20) } }{2x1}[/tex]
[tex]x1=\frac{-(-8)+\sqrt{144 } }{2x1}[/tex]
[tex]x1=\frac{8+\sqrt{144 } }{2}[/tex]
[tex]x1=\frac{8+12 }{2}[/tex]
[tex]x1=\frac{20}{2}[/tex]
x1= 10
and
[tex]x2=\frac{-(-8)-\sqrt{(-8)^{2}-4x1x(-20) } }{2x1}[/tex]
[tex]x2=\frac{-(-8)-\sqrt{144 } }{2x1}[/tex]
[tex]x2=\frac{8-\sqrt{144 } }{2}[/tex]
[tex]x2=\frac{8-12}{2}[/tex]
[tex]x2=\frac{-4}{2}[/tex]
x1= -2
Finally, the quadratic function (x - 4)² - 28 =8 has two solutions and the solutions are x1= 10 and x2= -2.
Learn more about the zeros of a quadratic function:
brainly.com/question/14477557
brainly.com/question/842305
brainly.com/question/14477557