When charging, which type of material usually gives off electrons: conductors or insulators? Why?



I need answers asaaap

Answers

Answer 1

When charging, conductors usually give off electrons. Conductors are materials that allow electrons to pass through them easily, whereas insulators are materials that prevent electrons from moving through them. Conductors can easily discharge when exposed to static electricity because electrons move more freely through conductors than they do through insulators.

When an object with an excess of electrons comes into touch with an object with a deficiency of electrons, the electrons will move from the charged object to the uncharged object because of the difference in potential energy. The most familiar conductors are metals, which are highly conductive due to the presence of free electrons. Insulators, on the other hand, are materials that do not conduct electricity. Air, paper, plastic, and rubber are all examples of insulators. The transfer of electrons from one object to another by friction, conduction, or induction is referred to as charging. When two materials are rubbed together, their electrons rub together, resulting in one material becoming charged positively and the other becoming charged negatively.

Learn more about potential energy here ;

https://brainly.com/question/24284560

#SPJ11


Related Questions



The seed planted at extreme cold or in the region of frozen ice do not germinate, why?​

Answers

Answer:

yes

The the seed planted at Extreme cold or in the region of frozen I did not germinate because the amount of moisture of the seed is too high which results in lack of air of the sea in the frozen ice

In fact, a soil temperature below 50°F might be problematic for many garden plants. Seeds will quickly absorb water at 40°C, but they won't begin to grow. This presents a risk for rot and disease, which may cause damping-off or subpar growth.

What is germination of seed?

The formation of the seedling is the consequence of germination, which is often the growth of a plant inside a seed. It is also the process of the seed's metabolic machinery being reactivated, which causes the radicle and plumule to emerge. A vascular plant's seed is a little bundle that develops in a fruit or cone as the result of the union of the male and female reproductive cells.

Given the need for particular internal or external stimuli to resume growth, dormant seeds are viable seeds that do not germinate. When the right circumstances are present, the seed starts to germinate and the embryo starts to grow again, eventually becoming a seedling.

Learn more about  germination  here:

https://brainly.com/question/1675149

#SPJ2

what different forms of energy are demonstrated by tv remote, flashlight, string lol ights, clock, and Toys​

Answers

Answer:

I hope it helps you

Explanation:

please mark me as brainllest answer please

Sound will travel slowest through which medium?

Answers

Ice at -25
Hope this helps
May God bless you and your family

Which type of protist is animal AND plant like?

Answers

Answer:

Protists are called plant-like, fungus-like and animal-like because they share some of the characteristics of plants, fungi and animals, even though they belong in a different category: the kingdom Protista.

Explanation:

Solve this question I don't get it

Answers

Answer:

idek

Explanation:

True or False:
Sensations of heaviness and lightness are always associated with changes in a person's weight. A person who feels light has lost weight and a person who feels heavy has gained weight.

If False, explain why the statement is false.

If True, explain why the statement is true.

Answers

False, you can feel heavy but not gain weight

It's not true, no. The weight can be used to calculate an object's product of mass, but not gravity. The object's mass is multiplied by gravity, as is evident. However, an object's mass will never be 0 and will always be constant, its weight would be zero if there is no gravity. Since mass and weight are not the same, the assertion is untrue.

What is Weight?

Weight is the gravitational pull of a large second object, thus the Moon or the Earth, at the first object. Weight is a result of the universal law of gravity, according to which any two objects will gravitationally pull one another with a force exactly equal to the applied of their masses and divided by the square of a distance separating them.

Because of this, larger items naturally weigh more when placed in the same spot; yet, the farther any object seems to be from the Earth, the less weight it has.

Because of the tiny difference in size between the polar and equatorial radii of the Earth, an object's weight at the South Pole is somewhat higher than its value at the Equator.

To know more about Weight:

https://brainly.com/question/10069252

#SPJ2

Physics mcq please be sure​

Answers

Answer:

1. c 2.d

Explanation:

we did this in middle school

What is the displacement of a car in 50 s if it is travelling with a velocity of 25 m/s?

Answers

Answer:

v =25 m/s

time= 50 s

Velocity =Displacement/Time

Displacement = Velocity × Time

S = 25×50

s=1250m

Explanation:

v =25 m/s

time= 50 s

Velocity =Displacement/Time

Displacement = Velocity × Time

A block of mass 0.5kg is pulled to the right with an applied force 3N at an angle 30 degrees above horizontal as shown. Ignoring friction, the acceleration of the block is...
A. 1.8
B. 3
C. 5.2
D. 6​

Answers

The answer is C, 5.2

Which of the following is a variable property for a gas? Select all that apply.

shape
mass
volume
density

Answers

Answer:

volume

Explanation:

mass density and shape are not variable to my view.

pressure volume

number of moles and temperature are variable

The biological levels of organization range from a single organelle all the way up to the biosphere in a highly structured hierarchy. Your lab partner is struggling to understand the interaction between the levels in the biological hierarchy. Using the model, what explanations can your offer to help your classmate? Choose ALL that apply.
A) R makes up Q which makes up P which makes up S.
B) Cells that work together make up tissues, which comprise organs.
C) Similar cells working together make up organs which make up organ systems.
D) In the model, the animal cells make up tissues such as muscle or connective tissue.
E) Organs, such as the stomach and intestines, make up organ systems which interact with one another to maintain homeostasis.

Answers

The model that depicts the concept of biological levels of an organization which is ranging from single organelle to biosphere is explained by all the options given except for options A and C.  

Biology is specifically the study that deals with various forms of life. Since life is considered a vast topic, scientists classified this broad system into different organizational levels for better understanding.

The Biological levels of the organization are described as follows:  

The biological level of organization of any living form is depicted and arranged from the simplest forms to the complex ones and thus, the order tends to start from organelles to the biosphere. The elaborated levels are in ascending order as organelles, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere respectively. Each level tends to combine with one another to give rise to the next level. One such example is that the cells that tend to work together make up the tissues, which further comprise the organs. Similarly, organ systems are formed by the interaction between certain organs in order to maintain homeostasis.

Considering all these facts, option C represents the statement that is incorrect as the cells cannot directly form organs without forming tissues and the letters in option A is not specific. And thus, we can conclude that except for options A and C, all the other options correctly depict the model of the Biological levels of the organization.

Learn more about the Biological levels of the organization here:

https://brainly.com/question/20702808

An instant soup is very low in fat and calories but high in sodium. Can this food be labeled “ healthy”?

Answers

Answer:

no

Explanation:

it is not healthy because sodium is not good to our body

No it is not healthy.

The following information should be considered:

The instant soup is the processed food and it have the expire time of about 6 months.If we make the soup homemade than it will be okay for only 1 or 2 foods. Also it is high in sodium.

Learn more: brainly.com/question/17429689

Which angle allows the soil to receive the most direct light from the lamp?
0 degrees
20 degrees
45 degrees
90 degrees

Answers

D. 90 degrees

Hope this helped !

Answer:

D. 90 degrees

Explanation:

just finished lab

Blake strikes a punching bag with 80N of force for 0.05 seconds. John strikes a
punching bag with 60N of force for 0.1 second. Who delivers a greater amount of
impulse?

Answers

Answer:

So impulse= force × timeP1= 80N× 0.05 = 4 P2= 60N × 0.1= 6 Hence John delivers a greater impulse I do exams and quizzes if your interested

Assignments
1. A shopper pushes a grocery cart 20.0 m at constant speed on level ground, against a 35.0 N
frictional force. He pushes in a direction 25.0" below the horizontal. (a) What is the work done
on the cart by friction? (b) What is the work done on the cart by the gravitational force? (c)
What is the work done on the cart by the shopper? (d) Find the force the shopper exerts, using
energy considerations. (e) What is the total work done on the cart?​

Answers

Hello there!

I hope you and your family are staying safe and healthy during this unprecendented time.

A) What is the work done?

Answer: We need to use the formula

[tex]w=-F_f(d)[/tex]

[tex]w=-(35)(20)[/tex]

[tex]w=-700J[/tex]

B) What is the work done on the cart by the gravitational force?  

Alright, we know that the gravitional force is perpendicular to the diplacement. Therefore, we gonna use the following formula:

[tex]w=Fdcos90[/tex]

[tex]w=0[/tex]

C) What is the work done on the cart by the shopper?

This is the easier part, since we already know that the work done by the shopper is the same as the work done by the friction force

[tex]W shopper + W friction = 0\\W shopper = W-friction \\W shopper = 700J[/tex]

D) Find the force the shopper exerts, using energy considerations.

[tex]F_f+Fcos25=0\\-35+Fcos25=0\\F=38.6N[/tex]

E) What is the total work done?

You just need to add them:

[tex]w=wshopper+wfriction\\w=0[/tex]

Mary takes a trip to California for her vacation. Her airplane leaves Boston and flies 3,000 miles west, arriving in San Francisco 6 hours later. What was the plane’s velocity? Calculate and include proper units!

Answers

Answer:

two hr lead =90 miles

90/15=6hrs

2+6=8pm

Explanation:

Will mark as brainliest !! plz answer it

Plzzz answer with explnation!!!

the value of acceleration due to gravity (g) will be maximum at:
.
a) 1/2 of the radius of earth

b) 1/4 of the radius of earth

c) 1/8 of the radius of earth

Answers

I answered first on your other comment!

work out

A rectangular block of mass 20 kg lies with a side 0.2m by 500cm on a tab
What is the pressure exerted by its weight on the table?​

Answers

Explanation:

force/area=pressure

force=10*mass

area=0.2*500

pressure=200/100=2

What are the half lives for uranium-235 and uranium-238?
a.
The half-life of uranium-235 is 713 seconds, the half-life of uranium-238 is 4.5 minutes
c.
The half-life of uranium-235 is 713,000,000 years, the half-life of uranium-238 is 4,500,000,000 years
b.
The half-life of uranium-235 is 713 days, the half-life of uranium-238 is 450 days
d.
None of the above

Answers

Answer:

C. The half-life of uranium-235 is 713,000,000 years, the half-life of uranium-238 is 4,500,000,000 years

how does a longshore current affect a beach?

Answers

Longshore currents are affected by the velocity and angle of a wave. When a wave breaks at a more acute (steep) angle on a beach, encounters a steeper beach slope, or is very high, longshore currents increase in velocity. ... This process, known as “longshore drift,” can cause significant beach erosion.

Answer:

"Longshore currents are affected by the velocity and angle of a wave. When a wave breaks at a more acute (steep) angle on a beach, encounters a steeper beach slope, or is very high, longshore currents increase in velocity. ... This process, known as “longshore drift,” can cause significant beach erosion."

Credits to ocean service

Explanation:

Hope this helps

What characteristic is necessary for the uranium in a nuclear reactor?

Answers

Answer:

U-235

Explanation:

a rare needed compound

Can somebody plz help me with this one the question is in the screen shot.

Answers

this is in order.

LANDFILL

GROUNDWATER

PESTICIDE

FERTILIZER

HAZARDOUS WASTE

SEPTIC SYSTEM

SEEPAGE

Some one plz help me I am so confused

Answers

Answer:

1. the attractive force that holds atoms or ions together

2. the average distance between the nucleus of two bonded atoms

3. the angle formed by two bonds to the same atom

Alice pulls her wagon with a force of 75N. If the she pulls the wagon for 50 meters, how much work has she done?

Answers

Answer: W=75.50J

Explanation:

W=Fd

A person does 15 J of work moving a couch 1.3 m. How much force was used?​

Answers

Answer:

11.53 N.

Explanation:

Work = Force * Displacement

W= 15 J

D = 1.3

And now you solve for Force.

15= 1.3F

F= 11.53 N

A wave hits an object as shown. A vertical line with Medium 1 to the left and Medium 2 to the right. An arrow from the left reaches the line. An arrow starts from the same point on the line and goes right at a different angle. Which kind of wave interaction is shown?

Answers

Answer:

refraction

Explanation:

When the wave moves from medium 1 to medium 2, then the wave gets refracted. Then the correct option is C.

What is the wave?

A wave is an energetic disturbance in a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic intensity, an electric potential, or a change in temperature are a few examples.

A wave is a dynamic disturbance of one or more variables that propagates in physics, geometry, and related sciences. When waves oscillate frequently around an equilibrium value at a certain frequency, they are said to be periodic.

The bending of waves as they go from one substance to another is known as wave refraction. It bends when the wave enters a new material because the wave's speed changes. The optical density or index of refraction of the material affects how light waves bend.

Thus, the correct option is C.

More about the wave link is given below.

https://brainly.com/question/29334933

#SPJ6

The missing options are given below.

absorption

diffraction

refraction

reflection

Each external force acts on the system for 10 seconds. Rank the change in momentum of each of the cart-cart systems from largest to smallest. (The label of “m” or “2 m” desginates the relative mass of each cart.)

It is possible to have some of the categories below BLANK since you may have items that are EQUAL to each other.
Put the largest as far up as you can, and the smallest as far down as you can

Answers

Answer:

thanks me later

PLEASS MARK ME AS BRAINLIEST ANSWER

skills needed in agawang panyo

Answers

Answer:

they are;at first its teamwork,then agility and quick thinking

Will clothes dry faster when they are folded or when they are not folded on the line?

Answers

Answer:

Not folded

Explanation:

not folded on the line

13-1 LIVE
2, A rectangulv Container of base socmby 30cm is filled
with water to be depth of 5cm. how much is the pressure exerted
at the base? (take pw= 1000kg /m3 and g=10m/s)​

Answers

Correct question is;

2, A rectangular Container of base 50 cm by 30cm is filled with water to be depth of 5cm. how much is the pressure exerted at the base? (take pw= 1000kg /m3 and g=10m/s)​

Answer:

P = 500 N/m²

Explanation:

Pressure exerted at the base is the hydrostatic pressure and it is given by the formula;

P = ρgh

Where;

ρ is density = 1000 kg/m³

g = 10 m/s²

h is depth = 5 cm = 0.05 m

Thus;

P = 1000 × 10 × 0.05

P = 500 N/m²

Other Questions
NO LINKS!!! URGENT HELP PLEASE!!!3. A virus has infected 400 people in the town and is spreading to 25% more people each day. Write an exponential function to model this situation, then find the number of 3000 people are infected.4. The population of a small town was 10,800 in 2002. Since then, the population has decreased at a rate of 2.5% each year. Write an exponential function to model the situation, then find when the popuation reaches half the 2002 value? among pla, pga, pcl, and p3hb which one has the lowest resorption rate and explain why The Mofo DAm holds back a depth of 70 ft of water, but the lake behind the dam is 100ft wide. The Fus-Ro-Dah Dam holds back a depth of 70 ft of water, but the lake behindthe dam is 2 miles wide. If the dams are to be constructed in the same way, which dam had to be constructed tobe strongest? The water levels do not vary seasonally. Write a recursive formula that can be used to describe the sequence 64, 112, 196, 343 Find h(x, y) = g(f(x, y)).g(t) = t2 + sqrt(t), f(x, y) = 5x + 4y 20Find the set on which h is continuous. estimate the total mass of the earth's atmosphere, using the known value of atmospheric pressure at sea level. demi moore began her acting career on which soap opera? Find an equation of the curve that passes through the point (0, 1) and whose slope at (x, y) is 17xy. Harold goes to Tri-State University and pays $40,000 in tuition. Harold works to pay for his schooling and has an AGI of $37,000. How much is his American Opportunity tax credit? a. $1,000 b. $2,500 c. $4,000 d. $2,000 e. He does not qualify for the American Opportunity tax credit. write a method, printfeetinches, that takes a length in feet as a double and that prints the corresponding whole numbers of feet and inches. for instance, the callprintfeetinches(1.25)should print1' 3'' (use the symbols ' for feet and '' for inches)since there is 1 foot and 3 inches in 1.25 feet (since 1 foot is 12 inches, 0.25 feet is 0.25 x 12 Juan believes that all "Anglos" are uptight and cold, and he won't listen to any evidence that contradicts his belief. This example illustrates a case of:a) Prejudice.b) deindividuation.c) Stereotyping.d) the self-serving bias. In the third stage of the B2B buying process, a firm will administer a request for proposals (RFP) in which ______ will bid on providing products or services to meet the firm's product specifications. an automobile engine provides 621 joules of work to push the pistons and generates 2150 joules of heat that must be carried away by the cooling system.Calculate the change in the internal energy of the engine. PLS HELP ME OUT MARKING AS BRAINlist question text synthesizing classical music with jazz evolved into what gunther schuller dubbed: In 2010, nominal GDP was $14.6 trillion and the GDP deflator was 110.6. What was real GDP for that year?A) $16.1 trillionB) $14.3 trillionC) $13.2 trillionD) $12.1 trillion According to the Elaboration Likelihood Model, we will likely use the central, more effortful route of processing when there are multiple messages that need to be processed at once we are making decisions about who to vote for in political elections a message is unimportant and the person is unable to process information someone is buying car insurance we are experiencing cognitive dissonance and stereotype threat at the same time O a message is important and the person has the ability to process a large amount of information During agarose gel electrophoresis of DNA, shorter DNA molecules typically migrate faster than longer molecules. When closed-circular DNA molecules of the same size possess different linking numbers, these DNA molecules will also separate during agarose gel electrophoresis. A sample of purified plasmid DNA of uniform length was separated on an agarose gel and stained, as shown. In addition to a strongly stained band (B), the gel shows a faintly stained band (A) that migrated a much shorter distance. B Select the statement that explains why two bands appeared in the migration pattern Band B DNA is negatively supercoiled, whereas band A DNA is positively supercoiled. Band B DNA is less supercoiled than band A DNA. Relaxed DNA is more susceptible to DNA damage, resulting in two populations of DNA size groups. Topoisomerase I supercoiled band B DNA and topoisomerase II supercoiled band A DNA. Band B DNA is more supercoiled than band A DNA. How would the addition of topoisomerase I to the plasmid sample prior to electrophoresis alter the migration pattern? The supercoiled DNA will relax. A new band will appear between the original A and B bands. Band A will disappear Band B will disappear. The migration pattern will change from discrete bands to a smear of many species. Incorrect after replication of a dna molecule is completed, two molecules are present - the complete original dna and an independent, newly synthesized dna double helix true or false When viewed straight down (90 to the surface), an incident light ray moving from the water to air is refracted