When two hydrogen atoms Combine to form a molecule the two nuclei can Spin in The Same or opposite direction his phenomena is known as ?​

Answer:

,

Explanation:

Refer to pics.............

26.4g is the percentage yield when 20g of aluminium are produced from 50g of aluminium oxide.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield increased by 100% divided by the experimental yield. The percentage return is 100% if the theoretical and actual yields are equal. Because the real yield is frequently lower than the theoretical value, percent yield is typically lower than 100%.

This may be due to incomplete or conflicting reactions or sample loss during recovery. If the percent yield is more than 100%, more sample than expected was retrieved from the reaction. This may have happened when other reactions took place and the product was also created.

2Al[tex]_2[/tex]O[tex]_3[/tex] → 4 Al + 3O[tex]_2[/tex]

2 mole of Al[tex]_2[/tex]O[tex]_3[/tex] =4 mol of Al

2(2×27+48) =4×27

204g of Al[tex]_2[/tex]O[tex]_3[/tex]  = 108g of Al

50g of Al[tex]_2[/tex]O[tex]_3[/tex] =x

26.4g =x

Therefore, 26.4g is the percentage yield when 20g of aluminium are produced from 50g of aluminium oxide.

To know more about percentage yield, here:

https://brainly.com/question/30774234

#SPJ2

Heat is produced anytime current flows in a circuit, due to the collision between the flowing free electrons and the fixed atoms. When an electric current flows through a conductor, the free electrons move through the lattice of atoms.

As they move, they collide with the fixed atoms, causing the atoms to vibrate and transfer energy to neighboring atoms. This energy transfer increases the temperature of the conductor, resulting in the production of heat.

The amount of heat produced is directly proportional to the amount of current flowing through the conductor, the resistance of the conductor, and the time for which the current flows. This relationship is described by Joule's law, which states that the heat produced is equal to the product of the current, the resistance, and the time.

Mathematically, this can be expressed as H = I^2RT, where H is the heat produced, I is the current, R is the resistance, and T is the time. The collision between the flowing free electrons and the fixed atoms in a conductor leads to the production of heat, which is proportional to the current, resistance, and time for which the current flows.

To learn more about heat

https://brainly.com/question/30603212

#SPJ4

   Let's choose sodium (Na) as an example, which is in period 3.

   Sodium has 1 valence electron.

   The element next to sodium on the periodic table is magnesium (Mg), also in period 3.

   Magnesium has 2 valence electrons, which is one more than sodium.

Answer:

DNA is an organism's genetic fingerprint because it contains unique genetic information that determines its development, function, and reproduction. This unique DNA sequence can be used for identification purposes, such as establishing paternity or maternity, identifying suspects in criminal investigations, and identifying remains in forensic investigations. The field of forensic science uses DNA analysis to compare DNA profiles from crime scenes to those of potential suspects, resulting in the conviction of many criminals who would have otherwise gone unpunished.

Answer:

Take 1600grams divide by 2

The Lewis structure for NO₂⁻ is found in the attachment.

The correct statement is the nitrite ion contains 1 N-O single bond and one N=O double bond. The correct option is C.

This is because the nitrite ion (NO2-) has a resonance structure in which the double bond can move between the two oxygen atoms.

This means that the nitrite ion has a partial double bond character, where one bond is a single bond between nitrogen and one of the oxygen atoms (N-O) and the other bond is a double bond between nitrogen and the other oxygen atom (N=O).

Therefore, statement (a) is not true, as the two N-O bonds in the nitrite ion are not equivalent to 1 1/2 bonds. Statement (b) is not true, as there is only one N=O double bond in the nitrite ion. Statement (d) is not true, as there is only one N-O single bond in the nitrite ion.

Learn more about the nitrite ion at: https://brainly.com/question/29957865

#SPJ1

Answer:

true

The water cycle affects the weather and climate of a particular region in multiple ways

Polymers are large molecules made up of repeating subunits called monomers, and they are essential building blocks for many cellular structures and processes.

A molecule is a group of two or more atoms that are chemically bonded together. Molecules are the fundamental units of compounds, which are substances made up of two or more different types of atoms.

Molecules can have a variety of sizes and shapes, depending on the number and arrangement of atoms. Some molecules are simple, consisting of just a few atoms, while others are much larger and more complex, such as proteins or DNA. The properties and behavior of a substance depend largely on the types of molecules it contains and how those molecules interact with each other.

To know more about  molecules visit :

https://brainly.com/question/28931982

#SPJ1

The electron configuration of Cs⁺ is [Xe].

The electron configuration of Mg²⁺ is [Ne].

The electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.

The electron configuration of Cl⁻ is [Ne]3s²3p⁶.

Cs⁺: The Cs⁺ ion has lost one electron from the neutral Cs atom, which has an electron configuration of [Xe]6s¹. Therefore, the electron configuration of Cs⁺ is [Xe].

Mg²⁺: The Mg²⁺ ion has lost two electrons from the neutral Mg atom, which has an electron configuration of [Ne]3s². Therefore, the electron configuration of Mg²⁺ is [Ne].

Te²⁻: The Te²⁻ ion has gained two electrons compared to the neutral Te atom, which has an electron configuration of [Kr]5s²4d¹⁰5p⁴. Therefore, the electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.

Cl⁻: The Cl⁻ ion has gained one electron compared to the neutral Cl atom, which has an electron configuration of [Ne]3s²3p⁵. Therefore, the electron configuration of Cl⁻ is [Ne]3s²3p⁶.

Learn more about electron configuration here: https://brainly.com/question/11316046

#SPJ1

The reagents needed to carry out the halogenation of a ring are a halogen (e.g. bromine or chlorine) and ultraviolet (UV) light. The halogen is added to the ring in a reaction flask, and then the flask is exposed to UV light to activate the reaction.

The reagents required to carry out the given synthesis, which involves the halogenation of a ring with a halogen and UV light, are described below. The following are the reagents needed for the synthesis is Halogen and UV Light

The halogenation of a ring can be done with the halogen and UV light. The halogen and UV light are the two reagents needed to carry out this reaction. Halogens like fluorine, chlorine, bromine, and iodine can be used in halogenation. Halogenation of organic compounds is a common technique used in organic synthesis. Halogens' electronegativity makes them highly reactive, and their addition to a molecule usually results in the formation of new carbon-halogen bonds.

For more such questions on halogenation , Visit:

https://brainly.com/question/16662265

#SPJ11

Using the Clausius-Clapeyron equation, the pressure can be obtained as 3.86 atm

The Clausius-Clapeyron equation is an important thermodynamic equation that relates the vapor pressure of a liquid to its temperature and enthalpy of vaporization

The Clausius-Clapeyron equation describes how the vapor pressure of a liquid changes as a function of temperature, and how it is related to the enthalpy of vaporization of the liquid. This equation is particularly useful in understanding the behavior of substances at different temperatures and pressures, and is often used in thermodynamic calculations related to phase transitions and chemical reactions involving liquids and gases.

We know that;

ln(P2/P1) = ΔH/R (1/T2 - 1/T1)

ln(P2/1) = 35.2 * 10^3/8.314 (1/304.9 - 1/337.7)

ln(P2/1) = 35.2 * 10^3/8.314 (3.28 - 2.96) * 10^-3

P2/1 = e^1.35

P2 = 1 *  e^1.35

P2 = 3.86 atm

Learn more about Clausius-Clapeyron equation:https://brainly.com/question/13162576

#SPJ1

Answer:

The correctly written thermochemical equation is:

C3H8 (g) + 5O2 (g) → 3CO2 (g) + 4H2O (l), ΔH = -2,220 kJ/mol

This equation represents the combustion of propane (C3H8) in the presence of oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), with a heat release of -2,220 kJ/mol. The state symbols (g) for gases and (l) for liquids indicate the physical state of each substance at standard conditions.

Explanation:

ABOVE

The number of the grains of rice that we have from the question here is  16214 grains

In this case, we know that we have to rely on the information that we have in the question so as to be able to obtain the mass of the rice that we need in this case and that is what we are going to set out to do in this question.

We know that;

Mass of the Rice = 786 grams - 332 grams

= 454 g

If 1000 grains of rice have a mass of 28 g

x grains of rice have a mass of 454 g

x = 1000 * 454/28

x = 16214 grains

Learn more about rice:https://brainly.com/question/11877986

#SPJ1

The term Fractured Toughness is defined as the plane strain fracture toughness. This is expressed as KIC.

KIC stands for Fractured Toughness which is defined as a measure of the resistance of a material to crack extension under predominantly linear-elastic conditions that is low toughness conditions when there is little to no plastic deformation occurring at the crack tip. KIC is considered as the lower limiting value of fracture toughness in the environment and at the speed and temperature of the test and can be considered as a size-independent fracture parameter for brittle materials. There is no advance assurance that a valid fractured toughness value will be determined from a particular test of the specimen.

To learn more about Fractured Toughness

https://brainly.com/question/24060161

#SPJ4

Venconstriction B) reduces the amount of blood within the venous system, which increases the volume in the arterial and capillary systems.

Venoconstriction is the process of narrowing a vein by reducing its diameter. It could happen if the smooth muscles in the vein walls contract. This increases resistance to blood flow, which aids in the maintenance of blood pressure. Venoconstriction happens when the sympathetic nervous system activates to regulate blood flow. This response is triggered by many factors, including exercise, standing up, and emotional stress.

Venoconstriction is a normal bodily response that maintains blood flow and pressure. Blood pressure within the arterial system will rise when venous return decreases. The veins provide an essential volume reserve for the cardiovascular system. They serve as a storage tank for blood, and this is where the venous return is established.

The regulation of venous return is critical to the maintenance of cardiac output and arterial blood pressure. A decrease in venous return will result in a decrease in end-diastolic volume and, thus, a decrease in stroke volume. This is often followed by a drop in cardiac output, which causes arterial blood pressure to fall. Venous return can be affected by various factors, including venoconstriction or venodilation. Therefore option B is correct.

Know more about Venous return here :

https://brainly.com/question/29819510

#SPJ11

The mass of water released is  0.454 g

Moles of water released is 0.025 moles

Moles of CoCl2 remaining is 0.0042 moles

Value of x is 6

Mass of water released = 1. 0 g - 0.5460 g = 0.454 g

Moles of water released = 0.454 g/18 g/mol = 0.025 moles

Moles of CoCl2 remaining = 0.5460 g/130 g/mol = 0.0042 moles

We have;

Number of moles of anhydrous compound = Number of moles of hydrated compound

1/130 + 18 x = 0.0042

0.0042 (130 + 18x) = 1

0.546 + 0.0756x = 1

x = 1 - 0.546 /0.0756

x = 6

The value of x is 6

Learn more about hydrated compounds:https://brainly.com/question/27078278

#SPJ1

Answer:

See below.

Explanation:

The atomic number of lead (Pb) is 82, which means it has 82 electrons. The electronic configuration of lead is

1s² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹⁴ 5d¹⁰ 6s² 6p²

The orbital diagram for the valence electrons of lead (Pb) is

↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓

s s p p p p d d

2 1 6 2 6 2 10 10

|||||||||

1 2 3 4 5 6 7 8

The notation ↑↓ represents a pair of electrons with opposite spins.

To determine if lead (Pb) is diamagnetic or paramagnetic, we need to look at whether there are any unpaired electrons. Based on the orbital diagram, we can see that all the electrons in the valence shell are paired, meaning that lead (Pb) is diamagnetic.

1. The energy level of the reactants is lower than that of the products. - Endothermic

2. The combustion of wood provides energy - Exothermic

3. A reaction releases 101 J. - Exothermic

What is an Endothermic?

An endothermic process or reaction is a chemical or physical process that absorbs heat from the surroundings. In an endothermic process, energy is required to break the bonds in the reactants and form new bonds in the products. As a result, the temperature of the surroundings decreases, and the process feels cold to the touch. Examples of endothermic processes include melting ice, cooking an egg, and evaporating water.

What is an Exothermic?

An exothermic process or reaction is a chemical or physical process that releases heat into the surroundings. In an exothermic process, energy is released as the bonds in the reactants are broken and new bonds are formed in the products. As a result, the temperature of the surroundings increases, and the process feels warm to the touch. Examples of exothermic processes include burning a candle, combustion reactions, and the reaction between baking soda and vinegar.

To know more about Endothermic, visit:

https://brainly.com/question/23184814

#SPJ1

The total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.

To calculate the amount of energy, in joules, necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C, we must first calculate the heat necessary to heat the sample to the boiling point of ethanol, 78.3 degrees C. The formula to calculate the amount of energy is: Q = mcΔT, where m is the mass of the sample, c is the specific heat of ethanol, and ΔT is the temperature change from 11.1 degrees C to 78.3 degrees C. Thus, the amount of energy necessary to heat the sample is: Q = 13.1 g * 2.44 JK−1g−1 * (78.3-11.1) = 1,623.08 J.
Next, we must calculate the amount of energy necessary to completely vaporize the sample. To do so, we must use the heat of vaporization of ethanol, which is 38.56 kJ mol−1. To convert from moles to grams, we must use the molar mass of ethanol, which is 46 g/mol. Thus, the amount of energy necessary to vaporize the sample is: Q = (13.1 g/46 g/mol) * 38.56 kJ/mol = 7.15 kJ.
Finally, to calculate the total amount of energy necessary to heat and vaporize the sample, we must add the two values together: Q = 1,623.08 J + 7.15 kJ = 7.15 kJ. the total amount of energy necessary to heat and vaporize a 13.1 g sample of ethanol initially at a temperature of 11.1 degrees C is 7.15 kJ.

For more such questions on ethanol

https://brainly.com/question/29523373

#SPJ11

The concentration of each of the individual ions of the strong electrolyte in a 0.550 M (NH4)2S solution is 0.1100M and 0.550M. (NH4)2 S is a strong electrolyte as it completely dissociates into NH4+ and S2- ions.

A strong electrolyte is known as a solution or solute that completely or almost completely, ionizes or dissociates in a solution. These electrolytes are good conductors of electric current in the solution. Strong electrolyte is defined as a chemical in aqueous solution which is a good conductor of electricity. The term is also known as molar concentration. Molar concentration of a solution is defined as the number of moles of solute dissolved in one liter of solution. In order to calculate the molarity of a solution we have to divide the moles of solute by the volume of the solution expressed in liters.

So, (NH4)2S as strong electrolyte with complete dissociation, have the amount of molarity added times the number of moles of each compound:

NH4+ = 2 x (.550M) = .1100M

S2- = .550M

So the concentrations are determined are .1100M and .550M.

To learn more about Strong electrolyte

https://brainly.com/question/2285692

#SPJ4

The equilibrium constant, K is related to the amount of products and reactants at which the reaction reaches at equilibrium (a point where reaction rate is zero). So, the correct choice to fill up the blank is at equilibrium.

Equilibrium define when the rate of the forward reaction is equal to the rate of the backward reaction. The mathematical ratio showing the concentration of the product divided by the concentration of the reactant is called the equilibrium constant K. See the image above for an expression representing it. It expresses the relationship between the products and reactants of a reaction in equilibrium with a particular unit.

Equilibrium constants depend only on temperature and are independent of concentrations, pressures, and volumes of reactants and products. It is also independent of the presence of catalysts and the presence of inert materials. Thus, the right choice for filling the blank is at equilibrium.

For more information about equilibrium constant, refer:

https://brainly.com/question/19340344

#SPJ4

The element potassium (K) has an atomic number of 19 and its electron configuration does not begin with the argon core, instead beginning with 4s1. the correct answer is potassium (K).

The electron configuration of an element specifies the number of electrons in each of its atomic orbitals. The elements on the periodic table are arranged in order of increasing atomic number, which corresponds to the number of protons and electrons in the nucleus of an atom. Elements with an atomic number higher than 18, such as scandium (Sc), manganese (Mn), and chlorine (Cl), have electron configurations that begin with the noble gas argon (Ar) core of [Ar]3d10 4s2. However, the element potassium (K) has an atomic number of 19 and its electron configuration does not begin with the argon core, instead beginning with 4s1.
Therefore, the correct answer is potassium (K).

For more such questions on  electron configuration

https://brainly.com/question/26084288

#SPJ11

These compounds X and Y  do not undergo a Diels-Alder reaction with maleic anhydride.

The Diels-Alder reaction is a type of reaction in which two molecules react to form a larger, more complex molecule. In this reaction, one molecule must contain a double bond and the other must contain two or more electron-withdrawing groups (EWGs). The EWGs provide electron density to the double bond, allowing it to react. The double bond must also be a conjugated system, meaning it must consist of alternating single and double bonds.

Neither of the compounds X and Y undergoes a Diels-Alder reaction with maleic anhydride. The given information can be best explained by considering the molecular structure of the two compounds X and Y. Diels-Alder reaction is a chemical reaction that forms a cyclohexene ring by reacting a conjugated diene with a substituted alkene or alkyne.

Maleic anhydride is a cyclic dicarboxylic acid anhydride with a molecular formula of C4H2O3. It is a colorless or white crystalline solid with a pungent odor.

In the case of both compounds (X and Y) provided, neither contains a double bond nor a conjugated system. Without a double bond, the reaction does not occur. Without an EWG, the reaction does not occur. Therefore, these compounds do not undergo a Diels-Alder reaction with maleic anhydride.

For more such questions on Diels-Alder reaction , Visit:

https://brainly.com/question/30474400

#SPJ11

Answer:

The balanced chemical equation for the reaction is:

C2H6 + 3O2 → 2CO2 + 3H2O

To calculate the theoretical yield of CO2, we need to use the given amount of ethane and oxygen gas to determine which reactant is limiting, and then use stoichiometry to calculate the amount of CO2 that should be produced.

First, we need to calculate the number of moles of ethane and oxygen gas used in the reaction:

moles of ethane = 26.76 g / 30.07 g/mol = 0.8908 mol

moles of oxygen gas = 169.4 g / 32.00 g/mol = 5.304 mol

Next, we need to determine which reactant is limiting by comparing the number of moles of each reactant to their stoichiometric coefficients in the balanced equation. The stoichiometric ratio of ethane to oxygen gas is 1:3, so every one mole of ethane requires three moles of oxygen gas. Therefore, the limiting reactant is ethane, because there are only 0.8908 moles of it, whereas there are 5.304 moles of oxygen gas.

Using the stoichiometry of the balanced equation, we can calculate the theoretical yield of CO2:

moles of CO2 = moles of ethane × (2 moles of CO2 / 1 mole of C2H6) = 0.8908 mol × 2 = 1.7816 mol

mass of CO2 = moles of CO2 × molar mass of CO2 = 1.7816 mol × 44.01 g/mol = 78.5 g

Now, we can calculate the percent yield of CO2:

percent yield = (actual yield / theoretical yield) × 100%

actual yield = 69.7 g

percent yield = (69.7 g / 78.5 g) × 100% = 88.7%

Therefore, the percent yield of CO2 is 88.7%.

The pH of 0.352 M triethylammonium iodide, (C2H5)3NI, is 8.11.

This is calculated using the following equation:
pH = -log(Kb x [I-])
Where Kb is the base dissociation constant for triethylamine, (C2H5)3N, which is 5.2 x 10-4, and [I-] is the concentration of iodide ions, which is 0.352 M.
First, calculate the concentration of triethylamine, (C2H5)3N:
[(C2H5)3N] = (0.352 M) / (1 + Kb x (0.352 M))
[(C2H5)3N] = 0.351 M
Then, calculate the concentration of iodide ions, [I-], in the solution:
[I-] = 0.352 M - 0.351 M
[I-] = 0.001 M
Finally, calculate the pH of the solution:
pH = -log(Kb x [I-])
pH = -log(5.2 x 10-4 x 0.001)
pH = 8.11
Therefore, the pH of 0.352 M triethylammonium iodide, (C2H5)3NI, is 8.11.

For more such questions on pH

https://brainly.com/question/172153

#SPJ11

Answer:

Your answer is on the attached image. I hope this helps!

Consider marking Brainliest!

In a solution with a pH of 11, phenolphthalein will turn pink, and litmus will turn purple.

The solution with a pH of 11 is first tested with phenolphthalein and then with litmus. When a solution with a pH of 11 is tested with phenolphthalein, the color is pink. When the same solution is tested with litmus, the color is blue.

Phenolphthalein and litmus are commonly used as indicators in acid-base titration, where a pH change can be detected by a change in color. These indicators have different pH ranges where their colors change, making them useful in identifying the pH of a solution.

For more such questions on phenolphthalein , Visit:

https://brainly.com/question/2815636

#SPJ11

The standard change in Gibbs energy at 25 degree Celsius is  490.6 °C. for given equilibrium partial pressure  .

The Gibbs energy is the thermodynamic potential that is minimized when a system reaches chemical equilibrium at constant pressure and temperature when not driven by an applied electrolytic voltage. Its derivative with respect to the reaction coordinate of the system then vanishes at the equilibrium point.

Using the formula

ΔG° =  - R × T ln K

WHERE R=  8.3144598 J⋅mol⁻¹⋅K⁻¹.

T = 298 K

K = 0.82

SOLVING ,

The standard change in Gibbs energy at 25 degree Celsius is  490.6 °C.

To know more about Gibbs energy , visit ;

brainly.com/question/20358734

#SPJ1

The quaternary structure of hemoglobin is responsible for the increased oxygen-carrying capacity and stability of the molecule. This structure allows hemoglobin to better transport oxygen throughout the body and is essential to life.

The structural change from myoglobin to hemoglobin includes an additional quaternary structure, which is the arrangement of two or more myoglobin subunits into a single, functional entity. This structural change allows for the cooperative binding of oxygen, meaning that the hemoglobin molecule can carry more oxygen than a single myoglobin molecule can. This is due to the increased surface area of the hemoglobin molecule, which provides more oxygen-binding sites. Additionally, the quaternary structure of hemoglobin increases the stability of the molecule, meaning it can better resist changes in pH or temperature. This is important because it allows hemoglobin to function in the wide range of temperatures and environments that are found within the human body.  

To learn more about Hemoglobin :

https://brainly.com/question/11102357

#SPJ11

The root mean square speed of F2(g) molecules under the same conditions is approximately 431.3 m/s.

The root mean square (rms) speed of a gas molecule is related to its average kinetic energy (KE) by the following equation:

rms speed = √(3RT/M)

Where

To solve for the rms speed of F2(g) molecules, we need to know the temperature and molar mass of F2(g). Let's assume that the temperature is the same as the conditions in which He(g) has an average kinetic energy of 7450 J/mol. The molar mass of F2 is 2 x the molar mass of one fluorine atom, which is approximately 19 amu.

Substituting these values into the equation, we get:

Now we can solve for the rms speed by plugging in the given value of average kinetic energy for He(g) and solving for T:

7450 J/mol = (1/2) x (3/2) x R x T

T = 7450 J/mol / (1.5 x 8.314 J/mol·K)

T = 597 K

Substituting this value of T into the equation for rms speed, we get:

rms speed = √(0.6564 J/K x mol x 597 K / 1 mol)

rms speed = 431.3 m/s

Therefore, the root mean square speed of F2(g) molecules under the same conditions is approximately 431.3 m/s.

Learn more about average kinetic energy here : brainly.com/question/492249

#SPJ1