Which of the following is a compound that would
be the most soluble in water? (DOK 2)
O A nitrogen triargonide
O B. carbon tetrachloride
O C. lithium fluoride
O D. magnesium disulfide

Tom 75 kg stands in a 25kg canoe that is still in the water. If he jumps east out of the canoe with a speed of 5. 0 m/s,  the recoil speed of the canoe would be 15.0 m/s in the opposite direction (west) when Tom jumps east out of the canoe with a speed of 5.0 m/s. The negative sign indicates the opposite direction of motion.

To determine the recoil speed of the canoe when Tom jumps out, we can apply the principle of conservation of momentum. According to this principle, the total momentum before the jump is equal to the total momentum after the jump.

Initially, both Tom and the canoe are at rest, so the total momentum is zero. After the jump, Tom moves in one direction, and the canoe moves in the opposite direction to conserve momentum.

The momentum of an object is defined as the product of its mass and velocity. The momentum before the jump is given by:

Initial momentum = (mass of Tom + mass of canoe) * 0

The momentum after the jump is given by:

Final momentum = mass of Tom * velocity of Tom + mass of canoe * velocity of canoe

Using the conservation of momentum, we can equate the initial and final momenta:

0 = (mass of Tom + mass of canoe) * 0

0 = mass of Tom * velocity of Tom + mass of canoe * velocity of canoe

Substituting the given values:

0 = 75 kg * 5.0 m/s + 25 kg * velocity of canoe

Solving for the velocity of the canoe:

-75 kg * 5.0 m/s = 25 kg * velocity of canoe

Velocity of canoe = (-75 kg * 5.0 m/s) / 25 kg

Velocity of canoe = -15.0 m/s

Therefore, the recoil speed of the canoe would be 15.0 m/s in the opposite direction (west) when Tom jumps east out of the canoe with a speed of 5.0 m/s. The negative sign indicates the opposite direction of motion.

Learn more about recoil speed here:

https://brainly.com/question/26714844

#SPJ11

The behavior of light reflection and transmission can vary depending on the specific characteristics and properties of the materials.

A list of materials based on the description

a. Reflect all or most of the light bounces back (Transparent medium):

Glass

Clear plastic

Air (in certain conditions)

b. Partially reflect light (Translucent medium):

Frosted glass

Wax paper

Tinted glass

Some types of plastics

c. Absorb no light bounces back (Opaque medium):

Wood

Metal

Cardboard

Brick

Rubber

Most fabrics

Please note that this is a general list, and the behavior of light reflection and transmission can vary depending on the specific characteristics and properties of the materials.

To know more about light reflection here

https://brainly.com/question/12271361

#SPJ4

Each sphere has a negative charge of [tex]4.48 x 10^-9 C[/tex] induced on it by the charged rod.

Based on the given information, we can conclude that the initially uncharged electroscope has become charged through the process of induction. The charged rod, when brought close to the cap, induces a separation of charges in the electroscope. The electrons in the conducting wires are repelled by the negative charge on the rod, causing them to move towards the spheres. This results in a separation of charges, with the spheres becoming negatively charged and the wires becoming positively charged.

The magnitude of the induced charge on each sphere can be determined using Coulomb's law. Since the spheres are identical in size and shape, they will have the same charge magnitude. The equation for Coulomb's law is:

[tex]F = k(q1q2 / r^2)[/tex]

where F is the electrostatic force, k is Coulomb's constant ([tex]9 x 10^9 Nm^2/C^2[/tex]), q1 and q2 are the magnitudes of the charges on the two spheres, and r is the distance between them (0.3 m).

Since the spheres are separated by 30 cm, or 0.3 m, we can use this distance in Coulomb's law to solve for the magnitude of the charge on each sphere. Rearranging the equation, we get:

[tex]q1q2 = Fr^2 / k[/tex]

Plugging in the given values, we get:

[tex]q1q2 = (9 x 10^9 Nm^2/C^2) x (25 g) x (9.8 m/s^2) x (0.3 m)^2 / 2 = 20.1 x 10^-9 C^2[/tex]

Since the spheres have the same charge magnitude, we can take the square root of this value to find the magnitude of the charge on each sphere:

q1 = q2 = sqrt(20.1 x 10^-9) = 4.48 x 10^-9 C

Learn more about charged rod here :-

https://brainly.com/question/30696850

#SPJ11

The person can only see objects clearly up to a distance of 1.316 meters.

To find the uncorrected far-point distance of a nearsighted person wearing contacts with a focal length of 8.0 cm, we can use the formula:

1/d₁ = 1/f - 1/d₂

where d₁ is the uncorrected far-point distance, f is the focal length of the contacts, and d₂ is the far-point distance with the contacts.

We know that f = 8.0 cm and d₂ = 8.5 m = 850 cm (since the far-point distance is defined as the distance at which the eye can see distant objects clearly).

Plugging in these values, we get:

1/d₁ = 1/8.0 - 1/850

Solving for d, we get:

d₁ = 131.6 cm

Therefore, the uncorrected far-point distance of the nearsighted person is 131.6 cm or 1.316 meters.

To explain in 150 words, a nearsighted person has difficulty seeing distant objects clearly because the light entering their eyes is focused in front of the retina instead of directly on it. Contact lenses with a negative focal length can help correct this by diverging the incoming light and moving the focal point further back. The focal length of the contacts in this case is 8.0 cm.

The far-point distance is the farthest distance at which a person can see clearly without visual aids. With the contacts, the far-point distance is 8.5 meters. Using the formula for lenses, we can find the uncorrected far-point distance, which is the farthest distance at which a person can see clearly without the contacts. The uncorrected far-point distance is 131.6 cm or 1.316 meters.

Learn more about distance

brainly.com/question/31713805

#SPJ11

This means that the resulting force on the electron is 9.70 x 10^-18 N to the left. Therefore, the correct answer is option b) 9.70 x 10^-18 N left.

The resulting force on an electron placed in an electric field of 60.6 n/c to the left can be calculated using the formula F = qE, where F is the force, q is the charge of the electron, and E is the electric field strength. The charge of an electron is negative (-1.6 x 10^-19 C).
So,
F = (-1.6 x 10^-19 C) x (60.6 n/c to the left)
F = -9.696 x 10^-18 N
This means that the resulting force on the electron is 9.70 x 10^-18 N to the left. Therefore, the correct answer is option b) 9.70 x 10^-18 N left.
To know more about force visit:

https://brainly.com/question/13191643

#SPJ11

In part d, the potential differences across the resistor, inductor, and capacitor are related to the potential difference across the AC source through the principles of voltage division.

Sources are as follows:
1. Potential difference across the resistor (V_R): V_R = I * R, where I is the current flowing through the resistor and R is the resistance of the resistor.
2. Potential difference across the inductor (V_L): V_L = L * (dI/dt), where L is the inductance of the inductor, and dI/dt is the rate of change of current with respect to time.
3. Potential difference across the capacitor (V_C): V_C = Q / C, where Q is the charge stored on the capacitor and C is the capacitance of the capacitor.
The potential difference across the AC source (V_source) is the sum of the potential differences across the resistor, inductor, and capacitor: V_source = V_R + V_L + V_C.
This relationship shows how the potential differences across the resistor, inductor, and capacitor contribute to the overall potential difference across the AC source in a circuit.

You can learn more about potential differences at: https://brainly.com/question/23716417

#SPJ11

The maximum radiated power density at a distance of 1 km from a center-fed Hertzian dipole can be determined using the formula: Pdmax = (30 * Pi^2 * i0^2 * L^2) / λ^2 * R^2. Where Pdmax is the maximum radiated power density, i0 is the current through the dipole, L is the length of the dipole, λ is the wavelength, and R is the distance from the dipole.

In this problem, the length of the dipole is given as λ/50, which means that L = λ/50. The wavelength can be calculated using the formula: λ = c / f. Where c is the speed of light (3 * 10^8 m/s) and f is the frequency. The frequency is not given in the problem, so we cannot calculate the wavelength.

To calculate the maximum radiated power density (P_rad), we can use the following formula: P_rad = (I0^2 * μ0 * c) / (32 * π^2 * R^2)
where:
- I0 = 20 A (the current)
- μ0 = 4π x 10^-7 H/m (permeability of free space)
- c = 3 x 10^8 m/s (speed of light)
- R = 1000 m (distance from the dipole).

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ11

The resistance of the heating element in the toaster is 6.54 ohms.

The heating element of a toaster dissipates 2200 W (watts) when connected to a 120 V (volts) and 60 Hz (hertz) power line.

To find the resistance (R) of the heating element, we can use Ohm's Law:
V = I * R

where,

V = voltage

I = current

R = resistance

First, we need to find the current (I) using the power equation:
P = V * I

Rearrange for I:
I = P / V

Substitute the given values:

I = 2200 W / 120 V = 18.33 A (amperes)

To find the resistance, use Ohm's Law
120 V = 18.33 A * R

Rearrange for R:
R = V / I

Substitute the values:

R = 120 V / 18.33 A = 6.54 Ω (ohms)

So, the resistance of the heating element in the toaster is approximately 6.54 ohms.

know more about resistance here:

https://brainly.com/question/30901006

#SPJ11

A.) The angular acceleration of the drill is 167.55 rad/s^2.

B.) During the first 0.60 s, the drill turns approximately 4.80 revolutions.

A) We can use the following formula to calculate angular acceleration:

angular acceleration (alpha) = (angular velocity change (omega)) / (time (t))

The angular velocity change is equal to the final angular velocity minus the beginning angular velocity, so:

2400 rpm = 2400 * 2*pi / 60 rad/s = 100.53 rad/s = omega final

initial omega = 0 rpm = 0 rad/s t = 0.60 s

When we plug in the values, we get:

167.55 rad/s2 = alpha = (100.53 - 0) / 0.60

As a result, the drill's angular acceleration is 167.55 rad/s2.

B) We can use the following formula to calculate angular displacement:

(angular velocity (omega) * time (t)) = angular displacement (theta)

Because the angular velocity changes during the first 0.60 s, we must take the average of the initial and final angular velocities. The average angular velocity is as follows:

(0 + 100.53) / 2 = 50.27 rad/s

Using this average angular velocity and 0.60 s, we obtain:

50.27 * 0.60 = 30.16 radians theta

As a result, the drill turns approximately 4.80 revolutions within the first 0.60 s.

For such more question on acceleration:

https://brainly.com/question/460763

#SPJ11

The potential difference between the points on the x-axis at x = 1 m and x = 2 m is 7.5 volts (V).

To find the potential difference between the points on the x-axis at x = 1 m and x = 2 m, we need to integrate the given electric field expression.

The potential difference (V) between two points in an electric field is given by the equation:

V = ∫ E dx

where E is the electric field and dx is an infinitesimally small displacement along the x-axis.

In this case, the electric field is given as Ex = 2.0x³ kN/m³ C.

To find the potential difference between x = 1 m and x = 2 m, we integrate the electric field expression over that interval:

V = [tex]\int\limits^2_1[/tex] Ex dx

V = [tex]\int\limits^2_1[/tex](2.0x³ kN/m³ C) dx

V = 2.0 [tex]\int\limits^2_1[/tex](x³) dx

Integrating x³ with respect to x gives us:

V = 2.0 * [1/4 * x⁴] evaluated from 1 to 2

V = 2.0 * [1/4 * (2⁴) - 1/4 * (1⁴)]

V = 2.0 * [1/4 * 16 - 1/4 * 1]

V = 2.0 * [4 - 1/4]

V = 2.0 * [16/4 - 1/4]

V = 2.0 * [15/4]

V = 30/4

V = 7.5 V

Learn more about integral: https://brainly.com/question/31059545

#SPJ11

The E field associated with a ball is radial with magnitude 1x[tex]10^{6}[/tex] N/C. The value of the force experienced by the test charge is 4 * [tex]10^{-3}[/tex] N (newtons).

To calculate the value of the force experienced by the test charge, we can use the formula:

F = q * E

Where F is the force, q is the charge, and E is the magnitude of the electric field.

Given:

Magnitude of the electric field (E) = 1x[tex]10^{6}[/tex] N/C

Test charge (q) = 4 nC (4 * [tex]10^{-9}[/tex] C)

Substituting the values into the formula:

F = (4 * [tex]10^{-9}[/tex]  C) * (1x[tex]10^{6}[/tex] N/C)

F = 4 * [tex]10^{-9}[/tex]  * 1x[tex]10^{6}[/tex] N

F = 4 * [tex]10^{-9}[/tex]  * [tex]10^{6}[/tex] N

F = 4 * [tex]10^{-9}[/tex]  * [tex]10^{6}[/tex]N

F = 4 * [tex]10^{-3}[/tex] N

Therefore, the value of the force experienced by the test charge is 4 * [tex]10^{-3}[/tex] N (newtons).

The question is '' If the E field associated with a ball is radial with magnitude 1x[tex]10^{6}[/tex] N/C, calculate the value of the force if the test charge is 4nC ''.

To know more about force here

https://brainly.com/question/28680603

#SPJ4

To derive the expression for the voltage vR across the resistor, we can use Ohm's law and the fact that the voltage across the inductor and resistor in a series circuit must add up to the total voltage of the source. Therefore, vR at 1.88 ms is approximately 8.736 V.

The voltage across the resistor is given by Ohm's law:

vR = IR,

where I is the current flowing through the circuit.

The current can be calculated by dividing the voltage across the inductor by the total impedance of the circuit:

I = VL / Z,

where VL is the amplitude of the voltage across the inductor.

The impedance Z of the circuit is the total opposition to the flow of current and is given by the square root of the sum of the squares of the resistance (R) and reactance (XL):

Z = √(R² + XL²).

In this case, the reactance of the inductor is given by XL = ωL, where ω is the angular frequency in radians per second and L is the inductance.

Substituting these equations, we can find an expression for the voltage vR across the resistor:

vR = IR = (VL / Z) × R = (VL / √(R² + XL²)) × R.

B) To find vR at 1.88 ms, we substitute the given values into the expression derived in part A.

Substituting these values into the expression for vR:

vR = (VL / √(R² + XL²)) * R.

First, we calculate the reactance of the inductor:

XL = ωL = (485 rad/s) × (0.160 H) = 77.6 Ω.

Then we substitute the values:

vR = (11.5 V / √(91.0² + 77.6²)) × 91.0 Ω.

Now we can calculate vR:

vR = (11.5 V / √(8281 + 6022.76)) × 91.0 Ω

= (11.5 V / √14303.76) × 91.0 Ω

= (11.5 V / 119.697) × 91.0 Ω

= 0.096 V × 91.0 Ω

= 8.736 V.

Therefore, vR at 1.88 ms is approximately 8.736 V.

To know more about ohm's law

https://brainly.com/question/1247379

#SPJ4

True. Augmented feedback in motor learning can include information about both kinetic (forces and torques) and kinematic (motion and movement) behavior. It provides additional information to learners to enhance their understanding and improve skill acquisition.

True. Augmented feedback in motor learning can consist of information about both kinetic and kinematic behaviour. Kinetic behaviour refers to the forces and torques involved in the movement, such as muscle activation patterns or joint forces. This type of feedback can help learners understand the magnitude and direction of forces acting during the movement. Kinematic behavior, on the other hand, focuses on motion and movement patterns, including factors like joint angles, velocity, and trajectory. Feedback regarding kinematic behaviour provides learners with information about the execution and coordination of movements. By incorporating both kinetic and kinematic information, augmented feedback can offer comprehensive guidance to enhance motor learning and performance.

Learn more about Kinetic behaviour here:

https://brainly.com/question/32183917

#SPJ11

The capacitance of the parallel plate capacitor is reduced to half.

A parallel plate capacitor is a device that has two parallel plates connected across a battery. The parallel plate capacitor charges the plates and creates an electric field between them.

The expression for capacitance of a parallel plate capacitor is given by,

C = εA/d

From the equation it is clear that the capacitance is directly proportional to the area of the plates and inversely proportional to the distance between the plates.

C'/C = 2A x d/(A x 4d)

C'/C = 1/2

Therefore, C' = C/2.

To learn more about parallel plate capacitor, click:

https://brainly.com/question/12733413

#SPJ1

The numerical value of the current in the solenoid is approximately 1.21 milliamps.

To find the current in the solenoid, we can use Ampere's law. The formula for the magnetic field B at the center of a solenoid is:

B = μ₀ * n * I / l

where B is the magnetic field, μ₀ is the permeability of free space (4π x 10⁻⁷ T·m/A), n is the number of turns, I is the current, and l is the length of the solenoid.

We are given B = 1.8 x 10⁻¹ T, n = 6500 turns, and l = 35 cm = 0.35 m. We need to find the current I.

1.8 x 10⁻¹ T = (4π x 10⁻⁷ T·m/A) * (6500 turns) * I / 0.35 m

To solve for I, rearrange the equation:

I = (1.8 x 10⁻¹ T * 0.35 m) / ((4π x 10⁻⁷ T·m/A) * 6500 turns)

Now, calculate the current:

I ≈ 0.00121 A

To convert the current to milliamps, multiply by 1000:

I ≈ 1.21 mA

Therefore, the numerical value of the current in the solenoid is approximately 1.21 milliamps.

To learn more about current, refer below:

https://brainly.com/question/13076734

#SPJ11

To find the instantaneous velocity and acceleration of the particle, we need to differentiate the position function, s(t), with respect to time, t.

(a)The instantaneous velocity of the particle at any time t is given by v(t) = -3t^2 + 14t - 14. Instantaneous velocity (v):

To find the instantaneous velocity, we differentiate the position function, s(t), with respect to time:

v(t) = s'(t)

Differentiating the function s(t):

s(t) = -t^3 + 7t^2 - 14t + 8

Differentiating each term with respect to t:

s'(t) = -3t^2 + 14t - 14

(b) The acceleration of the particle at any time t is given by a(t) = -6t + 14.

Acceleration (a):

To find the acceleration, we differentiate the velocity function, v(t), with respect to time:

a(t) = v'(t)

Differentiating the function v(t):

v(t) = -3t^2 + 14t - 14

Differentiating each term with respect to t:

v'(t) = -6t + 14

To know more about instantaneous velocity refer here

https://brainly.com/question/30782692#

#SPJ11

The depth of the beam h is approximately 15.4 cm and the width of the beam b is approximately 14.8 cm.

stress on the beam = σ = Mc/I

where M is the bending moment, c is the distance from the neutral axis to the extreme fiber, and I is the moment of inertia of the cross section.

The maximum bending moment occurs at the center of the beam

M = Pl/4

where P is the load and l is the length of the beam

moment of inertia of a rectangular cross section= I = (bh³)/12

b = width of the beam

h = depth of the beam

M = (40 kn)(2 m)/4 = 20 knm

I = (b(0.12 m)³)/12 = (b/10000) m⁴

Substituting these values into the expression for stress

σ = (20 kn m)(c)/((b/10000) m⁴)

The distance c is related to the depth h by:

c = h/2

substituting σ and τm into the expression for maximum shear stress

τm = (3/2)σ

h = √((6M)/(πbσm))

  = √((6(20 kn m))/(πb(12 mpa))) ≈ 0.154 m ≈ 15.4 cm

b = (4Pl)/(σmπh²)

  = (4(40 kn)(2 m))/(12 mpa π(0.154 m)²) ≈ 14.8 cm

The depth of the beam is approximately 15.4 cm and the width of the beam is approximately 14.8 cm.

Learn more about moment of inertia at:

brainly.com/question/15246709

#SPJ4

The amplitude of the bobbing motion of the boat at 200 rpm is 1 rad. The amplitude of the bobbing motion of the boat at 1000 rpm is 0.039 rad.

Assuming that the boat is at rest and the propeller starts to rotate at 200 rpm, the unbalanced force acting on the boat due to the offset moment of the detached bolts can be calculated as follows:

F = mω²A

where F = unbalanced force,

m = mass of the boat and passengers,

ω = angular velocity of the propeller in radians per second (ω = 2πf where f = frequency in Hz), and A = amplitude of the bobbing motion.

Using the given values, calculate the unbalanced force at 200 rpm:

ω = 2π(200/60) = 20.94 rad/s

m = 1000 lbs / 32.2 ft/s² = 31.06 slugs

F = 31.06 slugs × (20.94 rad/s)² × A

F = 13,431A lb-ft

Next, calculate the amplitude of the bobbing motion:

A = F/k

where k = stiffness of the boat in the vertical direction.

For a simple harmonic motion, k can be calculated as:

k = mω²

Substituting the values and solving for A:

k = 31.06 slugs × (20.94 rad/s)² = 13,431 lb-ft/rad

A = F/k = 13,431A lb-ft / 13,431 lb-ft/rad = A rad

A = 1 rad

Therefore, the amplitude of the bobbing motion of the boat at 200 rpm is 1 rad.

To calculate the amplitude at 1000 rpm, we can use the same equation:

A = F/k

But now the angular velocity of the propeller is:

ω = 2π(1000/60) = 104.72 rad/s

The unbalanced force is still 13,431A lb-ft, but the stiffness of the boat in the vertical direction changes due to the increase in frequency. For a simple harmonic motion, the stiffness is:

k = mω²

Substituting the values and solving for k:

k = 31.06 slugs × (104.72 rad/s)² = 343,548 lb-ft/rad

Now calculate the amplitude at 1000 rpm:

A = F/k = 13,431A lb-ft / 343,548 lb-ft/rad = 0.039A rad

A = 0.039 rad

Therefore, the amplitude of the bobbing motion of the boat at 1000 rpm is 0.039 rad.

Find out more on amplitude here: https://brainly.com/question/3613222

#SPJ4

The average density of the duck is determined to be 0.28 times the density of water.

To determine the average density of the duck, we can use the principle of buoyancy. When an object floats, it displaces a volume of liquid equal to its own weight. Therefore, the weight of the duck is balanced by the weight of the liquid it displaces.

Let's assume the total volume of the duck is V. Since 28% of its volume is beneath the water, the volume of water displaced by the duck is 0.28V.

The density of water is generally close to 1 g/cm³ or 1000 kg/m³. We can use this value to calculate the average density of the duck.

The weight of the water displaced by the duck is given by:

Weight of water = Density of water × Volume of water = 1000 kg/m³ × 0.28V

Since the weight of the duck is balanced by the weight of the water, the average density of the duck can be calculated as:

Average density of the duck = Weight of the duck / Volume of the duck

Since the weight of the duck is equal to the weight of the water displaced, we have:

Average density of the duck = Weight of water / Volume of the duck = (1000 kg/m³ × 0.28V) / V = 280 kg/m³

Therefore, the average density of the duck is 280 kg/m³.

Learn more about density

brainly.com/question/29775886

#SPJ11

The electric field due to the point charge located at the center of the cube can be calculated using Gauss's law and is given by E = charge / (ε0 x A).

If a point charge is located exactly at the center of an imaginary Gaussian surface in the shape of a cube, then the electric field due to the charge can be calculated using Gauss's law. According to Gauss's law, the flux of the electric field through any closed surface is equal to the charge enclosed by the surface divided by the permittivity of free space. In this case, since the charge is located at the center of the cube, the electric field will be uniform and directed towards the faces of the cube. Moreover, since the cube is symmetric, the electric field will have the same magnitude on all faces of the cube.
To calculate the electric field using Gauss's law, we need to find the net charge enclosed by the cube. Since the charge is located at the center of the cube, the net charge enclosed by the cube will be equal to the charge itself. Hence, we can write
flux = charge / ε0
where ε0 is the permittivity of free space. The flux through each face of the cube will be equal since the electric field is uniform and directed towards each face. Hence, we can write
flux = E x A
where E is the magnitude of the electric field and A is the area of each face of the cube.
Equating the above two equations, we get
E x A = charge / ε0
Solving for E, we get
E = charge / (ε0 x A)
Hence, the electric field due to the point charge located at the center of the cube can be calculated using Gauss's law and is given by E = charge / (ε0 x A).

To know more about Electric Field visit:
https://brainly.com/question/15800304
#SPJ11

Gilbert and Sanger developed Gilbert sequencing and Sanger sequencing, respectively. Gilbert sequencing uses chain termination, while Sanger sequencing employs dideoxy chain termination. Sanger sequencing is preferred due to its higher accuracy, efficiency, and wide acceptance.

Ans 1. Gilbert and Sanger discovered two approaches for DNA sequencing, which are the Maxam-Gilbert method and the Sanger method. The Maxam-Gilbert method uses chemical reactions to cleave DNA at specific bases, while the Sanger method uses DNA polymerase to synthesize a DNA strand and fluorescent dideoxy nucleotides to terminate chain elongation. The Sanger method is generally considered superior because it is more reliable and produces longer read lengths.

Ans 2. Shotgun sequencing is a method for sequencing DNA in which the genome is randomly fragmented into small pieces, which are then sequenced and assembled using computer algorithms. This method allows for the sequencing of large genomes in a more efficient and cost-effective manner.

Ans 3. Organisms with completely sequenced genomes:

a) Plant: Arabidopsis thaliana (Thale cress)

b) Animal: Homo sapiens (Human)

c) Fungi: Saccharomyces cerevisiae (Baker's yeast)

d) Protista: Plasmodium falciparum (Malaria parasite)

e) Bacteria: Escherichia coli (E. coli)

To know more about the Gilbert and Sanger refer here :

https://brainly.com/question/30590319#

#SPJ11

Complete answer :

1. Gilbert and Sanger discovered two approaches for DNA sequencing, and they both got the Nobel Prize. Describe the differences between these two methodologies. Why one is superior over the other?

2. What is shotgun sequencing?

3. Write the name of one organism from plant, animal, fungi, Protista, and bacteria whose genome has been completely sequenced.

Supernova explosions have played a significant role in the evolution of life on Earth by providing essential elements, promoting genetic diversity, and shaping the planet's climate and habitability.

Astronomers believe that supernova explosions in the Milky Way galaxy have played a role in the evolution of life on Earth over billions of years. Supernovae are the explosive deaths of massive stars that release tremendous amounts of energy and materials into space. These events have influenced the development of life on our planet in several ways.

First, supernovae create and distribute elements essential for life, such as carbon, nitrogen, and oxygen. The explosion disperses these elements into the interstellar medium, where they eventually become part of new star systems and planets, including Earth. This process enriches the composition of our planet, providing the necessary building blocks for the formation of life.

Second, the radiation from supernovae can induce genetic mutations in living organisms. While many of these mutations may be harmful or neutral, some can lead to evolutionary adaptations that increase an organism's chances of survival. This process promotes biodiversity and contributes to the complexity and diversity of life on Earth.

Lastly, supernovae can impact the climate and the habitability of our planet. The energy from nearby supernovae may temporarily strip away Earth's ozone layer, resulting in increased levels of harmful ultraviolet radiation. This could lead to mass extinctions, opening up new ecological niches for life to evolve and adapt.

Learn more about Supernova  here:-

https://brainly.com/question/31369072

#SPJ11

Calculating conformers from free energy differences involves understanding the relationship between the energy of a molecule and its different conformations. Conformers are different arrangements of atoms in a molecule that can be interconverted without breaking any covalent bonds.

These different conformers have different energy levels, which can be calculated using computational methods. To calculate the free energy differences between conformers, one needs to use thermodynamic equations that relate the energy of the molecule to its entropy and temperature. These equations can then be used to determine the relative stability of each conformer. Once the free energy differences between conformers have been calculated, one can use this information to predict which conformer is most likely to be present in a given environment. This is important in many areas of chemistry, such as drug design, where the effectiveness of a drug can depend on the specific conformer of the molecule.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ11

For the polynomial a(s), there are 0 poles in the R.H.P, 5 poles in the L.H.P, and 0 poles on the jω axis.

The given polynomial is a(s) = s^5 + 5s^4 + 11s^3 + 23s^2 + 28s + 12. To determine the number of poles on the right-half plane (R.H.P), left-half plane (L.H.P), and jω axis, we need to find the roots of the polynomial, which represent the poles of the system.
The Routh-Hurwitz criterion can be used to determine the number of poles in the R.H.P without explicitly finding the roots. Using the Routh-Hurwitz criterion, we form a Routh array. For this polynomial, the array is as follows:
s^5: |  1   11   28  |
s^4: |  5   23   12  |
s^3: |  3.4  8.2     |
s^2: |  23   12      |
s^1: |  20.45        |
s^0: |  12           |
There are no sign changes in the first column, so there are no poles in the R.H.P. To find the total number of poles on the L.H.P, subtract the number of poles in the R.H.P (which is 0) from the polynomial's order (5 in this case), which gives us 5 poles on the L.H.P.
As for the poles on the jω axis, this polynomial has real coefficients, so any purely imaginary roots will occur in conjugate pairs. Since we already know that there are 5 poles in the L.H.P and none in the R.H.P, there can't be any poles on the jω axis.
To know more about poles visit:

https://brainly.com/question/14929963

#SPJ11

The kinetic energy of the recoiling electron is 33.6 Kev.

First, we can find the initial momentum of the photon using its energy and the equation for the momentum of a photon:

p = E/c

where p is the momentum, E is the energy, and c is the speed of light.

So, the initial momentum of the photon is:

p1 = 38.0 keV / c

Next, we can use the conservation of momentum to find the final momentum of the photon and the recoiling electron:

p1 = p2 + p3

where p2 is the final momentum of the scattered photon and p3 is the momentum of the recoiling electron.

Since the photon scatters at a large angle from the electron, we can assume that the photon loses all its energy to the electron and is scattered at 180 degrees.

p2 = 38.0 keV / c

So, the momentum of the recoiling electron is:

p3 = p1 - p2 = 0

This means that the recoiling electron is at rest after the scattering event, so all of the energy of the photon is transferred to the electron. Therefore, the kinetic energy of the recoiling electron is:

Kinetic Energy (K) = 33.6 keV

So the kinetic energy of the recoiling electron is 33.6 keV.

Learn more about Kinetic Energy.

brainly.com/question/15764612

#SPJ11

The largest wavelength found in the scattered x-rays is 0.0845 nm.

The Compton scattering formula is given by:

λ' - λ = h/mc (1 - cosθ)

where λ = initial wavelength, λ' = final wavelength, h = Planck's constant, m = mass of the electron, c = speed of light, and θ = scattering angle.

In this case, the initial wavelength is λ = 6.80×10⁻² nm. The largest wavelength found in the scattered x-rays occurs when the scattering angle is 180 degrees (backscatter).

Therefore, cosθ = -1, and the formula becomes:

λ' = λ + h/mc (1 + cosθ)

λ' = 6.80×10−2 nm + h/mc

Substituting the values for h, m, and c:

λ' = 6.80×10⁻² nm + (6.626×10⁻³⁴ J·s)/(9.109×10⁻³¹ kg)(2.998×10⁸ m/s)

λ' = 6.80×10⁻² nm + 0.0045 nm

λ' = 0.0845 nm

Therefore, the largest wavelength found in the scattered x-rays is 0.0845 nm.

Find out more on x rays here: https://brainly.com/question/24505239

#SPJ4

a. The peak current using the characteristic equation: I = (Vo*t) / (2*R*C)

b. The phase angle of the source voltage is angle = arctan(Vo/I).

c.  Peak voltage: Vr = Vp * cos(angle)

d.  Peak voltage across L: Vl = Vp * cos(angle)

e. Peak voltage across C: Vc = Vp * cos(angle)

To solve this problem, we need to use the characteristic equation of an LRC circuit, which is given by:

1 + (2*RC) / (R + jXL) + (2*LC) / (C + jXC) = 0

First, we need to find the values of XL and XC using the impedance ratio formula:

Z = (R + j*XL) / (2*RC) = (2*LC) / (C + j*XC)

Solving for XL and XC, we get:

XL = (RZ - 1)/(2C)

XC = (CZ - 1)/(2R)

Next, we can solve for the peak current using the characteristic equation:

I = (2*RC) / (2RC + 2L*C)

Solving for I, we get:

I = (Vo*t) / (2*R*C)

where t is the time for half a cycle of the source voltage.

The phase angle of the source voltage relative to the current can be found using the following formula:

angle = arctan(Vo/I)

where Vo is the peak voltage of the source voltage and I is the peak current in the circuit.

The peak voltage across R and its phase angle relative to the source voltage can be found using the following formula:

Vr = Vp * cos(angle)

where Vp is the peak voltage across R and angle is the angle we found earlier.

The peak voltage across L and its phase angle relative to the source voltage can be found using the following formula:

Vl = Vp * cos(angle)

where Vp is the peak voltage across L and angle is the angle we found earlier.

The peak voltage across C and its phase angle relative to the source voltage can be found using the following formula:

Vc = Vp * cos(angle)

Learn more about peak current visit: brainly.com/question/27839310

#SPJ4

The frequency of the photon is approximately 4.29 x 10^14 Hz.

To find the frequency (v) of a photon with a given energy (E), we'll first rearrange the equation E = h * v.

Step 1: Divide both sides of the equation by Planck's constant (h).
v = E / h

Step 2: Substitute the given energy value and Planck's constant value into the equation.
A photon has an energy of 2.84 x 10^-19 J. Planck's constant (h) is 6.626 x 10^-34 Js.
v = (2.84 x 10^-19 J) / (6.626 x 10^-34 Js)

Step 3: Calculate the frequency (v).
v ≈ 4.29 x 10^14 Hz

To know more about photon energy refer https://brainly.com/question/15946945

#SPJ11

The statement "one cannot with certainty define which quantum state a hydrogen atom is in" is false as a statement of the Heisenberg uncertainty principle.

The Heisenberg uncertainty principle is a fundamental principle of quantum mechanics that states that there is a fundamental limit to how precisely certain pairs of physical properties of a particle, such as its position and momentum, or its energy and time, can be known simultaneously.

The principle applies to all particles, not just hydrogen atoms, and is a consequence of the wave-particle duality of quantum mechanics. Therefore, it does not state that one cannot with certainty define which quantum state a hydrogen atom is in.

For more question on quantum click on

https://brainly.com/question/26095165

#SPJ11

The statement given in the question is actually true. According to the Heisenberg uncertainty principle, it is not possible to simultaneously determine the position and momentum of a particle with absolute accuracy.

In the case of a hydrogen atom, the electron is in a quantum state that is determined by its energy level. However, the position and momentum of the electron cannot be determined with certainty, due to the Heisenberg uncertainty principle. This is because the act of measuring the position of the electron will disturb its momentum, and vice versa.

Therefore, it is not possible to know with absolute certainty which quantum state the hydrogen atom is in, as the uncertainty principle places a fundamental limit on the accuracy of our measurements.

Learn more about hydrogen atom here : brainly.com/question/29661778

#SPJ11