which of the following molecules is not infrared active? a) n2 b) no c) co d) co2

Suppose 0.10 mol of Cu(NO₃)₂ and 1.50 mol of NH₃ are dissolved in water and diluted to a total volume of 1.00 l. The concentration of Cu²⁺ ions at equilibrium is 2.7 × 10⁻¹⁸ M.

The balanced chemical equation for the formation of Cu(NH₃)₄²⁺ is:

Cu(NO₃)₂ + 4NH₃ → Cu(NH₃)₄²⁺ + 2NO₃⁻

From the equation, 1 mole of Cu(NO₃)₂ reacts with 4 moles of NH₃ to form 1 mole of Cu(NH₃)₄²⁺.

Given that 0.10 mol of Cu(NO₃)₂ and 1.50 mol of NH₃ are dissolved in water and diluted to a total volume of 1.00 L, we can calculate the concentration of NH₃ as:

[ NH₃ ] = (1.50 mol) / (1.00 L) = 1.50 M

To find the concentration of Cu(NH₃)₄²⁺, we need to use the stoichiometry of the reaction:

1 mol Cu(NO₃)₂ produces 1 mol Cu(NH₃)₄²⁺

Therefore, the concentration of Cu(NH₃)₄²⁺ is:

[ Cu(NH₃)₄²⁺ ] = (0.10 mol) / (1.00 L) = 0.10 M

Since Cu(NH₃)₄²⁺ is a complex ion, we need to use the formation constant (Kf) to calculate the concentration of Cu²⁺ ions at equilibrium.

The formation constant for Cu(NH₃)₄²⁺ is 2.1 × 10^13.

Kf = [ Cu(NH₃)₄²⁺ ][ H₂O ]⁴ / [ Cu²⁺ ][ NH₃ ]₄

[ Cu²⁺ ] = [ Cu(NH₃)₄²⁺ ][ NH₃ ]⁴ / ([ H2O ]⁴ × Kf)

Substituting the given values, we get:

[ Cu²⁺ ] = (0.10 M)(1.50 M)⁴ / ([ H2O ]⁴ × 2.1 × 10¹³)

The concentration of water is approximately 55.5 M, so we can neglect its contribution to the denominator.

[ Cu²⁺ ] = (0.10 M)(1.50 M)⁴ / (55.5⁴ × 2.1 × 10¹³)

[ Cu²⁺ ] = 2.7 × 10⁻¹⁸ M

To learn more about diluted refer here:

https://brainly.com/question/28997625#

#SPJ11

False, heapsort cannot be used as the subroutine in radix sort because it does not operate in place.

Radix sort requires a stable, linear-time sorting algorithm as its subroutine, while heapsort is an unstable, comparison-based algorithm with O(n log n) time complexity.

Heapsort, on the other hand, is a comparison-based sorting algorithm that operates by building a binary heap and repeatedly extracting the maximum element from it.

It is not a stable sorting algorithm, which means it does not guarantee the preservation of the relative order of elements with equal keys. Additionally, heapsort has a time complexity of O(n log n), which is not linear.

Therefore, because heapsort does not satisfy the requirements of a stable, linear-time sorting algorithm, it cannot be used as a subroutine in radix sort.

Other sorting algorithms, such as counting sort or bucket sort, are commonly used as subroutines in radix sort due to their stability and linear time complexity.

To learn more about algorithm, refer below:

https://brainly.com/question/27913622

#SPJ11

The estimated boiling point of water atop Denali Mountain in Alaska is approximately 78.23 °C.

To estimate the boiling point of water atop Denali Mountain in Alaska, we can use the Clausius-Clapeyron equation, which relates the boiling point of a substance to its vapor pressure.

The equation is given as:

ln(P₁/P₂) = (ΔH_vap/R)((1/T₂) - (1/T₁))

Where:

P₁ = Initial pressure (standard atmospheric pressure at sea level, approximately 760 torr)

P₂ = Final pressure (579 torr, atop Denali Mountain)

ΔH_vap = Heat of vaporization of water (40.7 kJ/mol)

R = Gas constant (8.314 J/(mol·K))

T₁ = Initial temperature (boiling point of water at sea level, 100 °C)

T₂ = Final temperature (boiling point of water atop Denali Mountain, to be calculated)

Let's solve for T₂:

ln(760/579) = (40.7 × 10³ / (8.314))(1/T₂ - 1/373.15)

Simplifying the equation:

ln(1.3134) = 4.9025 × 10³(1/T₂ - 0.002681)

Now we can solve for T₂:

1/T₂ - 0.002681 = ln(1.3134) / 4.9025 × 10³

1/T₂ = (ln(1.3134) / 4.9025 × 10³) + 0.002681

T₂ = 1 / [(ln(1.3134) / 4.9025 × 10³) + 0.002681]

Calculating T₂:

T₂ ≈ 78.23 °C

Therefore, the estimated boiling point of water atop Denali Mountain in Alaska is approximately 78.23 °C.

Learn more about boiling point

brainly.com/question/2153588

#SPJ11

Enzymes that catalyze the removal of carbon dioxide from a substrate are called decarboxylases.

Decarboxylation is a chemical reaction that involves the removal of a carboxyl group (COOH) from a molecule, resulting in the release of carbon dioxide. Decarboxylases are important enzymes in many biological processes, including cellular respiration, the production of neurotransmitters, and the biosynthesis of fatty acids and amino acids. There are many different types of decarboxylases, each with their own specific substrate and reaction mechanism.

Some examples of decarboxylases include pyruvate decarboxylase, which is involved in the fermentation of glucose to produce ethanol, and glutamate decarboxylase, which is important for the synthesis of the neurotransmitter gamma-aminobutyric acid (GABA) in the brain. Understanding the function and properties of decarboxylases is essential for the study of biochemistry and the development of new drugs and therapies. So therefore decarboxylases is the enzyme that catalyze the removal of carbon dioxide from a substrate.

Learn more about enzyme at

https://brainly.com/question/30600790

#SPJ11

The total volume of gas produced by the complete decomposition of 1.53 kg of ammonium nitrate is 4.24 × [tex]10^(-4) m^3.[/tex]

The volume of gas produced by the complete decomposition of 1.53 kg of ammonium nitrate can be calculated using the following formula:

V = n / P

where V is the volume of gas produced, n is the number of moles of gas produced, and P is the pressure of the gas.

The number of moles of gas produced can be calculated using the molar mass of each substance and the balanced equation.

The molar mass of ammonium nitrate is 135.4 g/mol and the molar mass of N2, O2, and H2O are 28.01 g/mol, 32.00 g/mol, and 18.01 g/mol respectively.

The balanced equation is:

2NH₄NO³(s)→2N₂(g)+O₂(g)+4H₂O(g)

The number of moles of gas produced is:

n = (2 * 1.53 kg) / (2 * 32.00 g/mol + 2 * 28.01 g/mol + 2 * 18.01 g/mol)

n = 0.153 kg / (4 * 32.00 g/mol)

n = 0.007 mol

The volume of gas produced is:

V = n / P

V = 0.007 mol / (760 mmHg * 135.4 g/mol / 1 mol)

V = 4.24 × 10[tex]^(-4)[/tex] [tex]m^3[/tex]

Therefore, the total volume of gas produced by the complete decomposition of 1.53 kg of ammonium nitrate is 4.24 × [tex]10^(-4) m^3.[/tex]

Learn more about ammonium nitrate

https://brainly.com/question/5148461

#SPJ4

Reaction of alkenes with D2 produces deuterium-substituted alkene or alkane products; a chiral alkene can produce a racemic mixture of enantiomers if both carbons are deuterated.

When an alkene reacts with D2, a process known as deuteration, the D2 can add to one or both of the carbons in the double bond.

If the D2 adds to only one of the carbons, a deuterium-substituted alkene is formed. If the D2 adds to both carbons, a deuterium-substituted alkane is formed.

if the starting alkene is 1-butene, the reaction with D2 would give two products:

If the starting alkene is chiral, the reaction with D2 can lead to a racemic mixture of enantiomers if both carbons are deuterated.

The deuterium can add to the double bond from the top or bottom face, resulting in two possible stereoisomers.

Learn more about deuterium-substituted

brainly.com/question/31483759

#SPJ11

A resonance hybrid is used between resonance forms to indicate that the actual structure exists as an average.

To know more about ]resonance form, refer here

https://brainly.com/question/28318319#

#SPJ11

The presence of the nitro group in the meta position helps stabilize the base via resonance.
In contrast, the nitro group in the para position cannot participate in resonance as effectively, resulting in a less stable base and therefore a lower basicity.

Let’s learn about the difference in basicity between para-nitroaniline and meta-nitroaniline. Para-nitroaniline is an order of magnitude less basic than meta-nitroaniline. The observed difference in basicity can be explained as follows:

The presence of the nitro group in the para position helps stabilize the base via resonance. When the nitro group is in the para position, it can delocalize the lone pair of electrons on the nitrogen atom through resonance, forming a partial double bond with the nitrogen and effectively reducing the basicity of the molecule.
In contrast, when the nitro group is in the meta position, the lone pair of electrons on the nitrogen atom cannot participate in resonance with the nitro group, and the molecule retains its basic character.

Learn more about para nytroaniline

https://brainly.com/question/31677732
#SPJ11

1. The pressure of the carbon dioxide gas sample is approximately 46.9 mm Hg.

2. The temperature of the argon gas sample is approximately 299 °C.

3. The volume of the helium gas sample is approximately 0.0686 L.

1. To find the pressure of the gas sample, we can use the ideal gas law equation:

PV = nRT

Given that the temperature is 19.0 °C (which needs to be converted to Kelvin by adding 273.15) and the volume is 27.5 liters, we have:

P * 27.5 = 0.795 * R * (19.0 + 273.15)

Simplifying the equation, we can solve for P:

P = (0.795 * R * (19.0 + 273.15)) / 27.5

Using the ideal gas constant value of R = 0.0821 L·atm/(mol·K), we can substitute it into the equation to calculate the pressure P. The result will be in atmospheres (atm), so we need to convert it to millimeters of mercury (mm Hg) by multiplying it by 760.

2. We can use the ideal gas law equation to find the volume of the gas sample:

PV = nRT

Given that the pressure is 315 mm Hg (which needs to be converted to atmospheres by dividing by 760), the temperature is 303 K, and the mass is 2.45 grams (which needs to be converted to moles by dividing by the molar mass of helium), we have:

(315/760) * V = (2.45 / molar mass of helium) * 0.0821 * 303

Simplifying the equation, we can solve for V (volume):

V = ((2.45 / molar mass of helium) * 0.0821 * 303) / (315/760)

Substituting the given values and the molar mass of helium (4.00 g/mol), we can calculate the volume V in liters.

3. To find the temperature of the gas sample, we can use the ideal gas law equation:

PV = nRT

Given that the pressure is 3.93 atm, the volume is 843 milliliters (which needs to be converted to liters by dividing by 1000), and the mass is 17.4 grams (which needs to be converted to moles by dividing by the molar mass of argon), we have:

(3.93 * (843/1000)) = (17.4 / molar mass of argon) * R * T

Simplifying the equation, we can solve for T (temperature):

T = (3.93 * (843/1000)) / ((17.4 / molar mass of argon) * R)

Substituting the given values and the molar mass of argon (39.95 g/mol), we can calculate the temperature T in Kelvin. The result needs to be converted to Celsius by subtracting 273.15.

To learn more about temperature, pressure and volume, here

https://brainly.com/question/31329242

#SPJ4

When the pressure increases by 15 PSI, the new temperature will be 472 ⁰C.

The pressure law, also known as Gay-Lussac's law, states that the pressure of a fixed amount of gas at a constant volume is directly proportional to its temperature, provided that the mass and volume of the gas remain constant.

This law can be expressed mathematically as;

P₁/T₁ = P₂/T₂

T₂ = (P₂T₁)/P₁

When the pressure increases by 15 PSI, the new temperature will be;

T₂ = (15 + P₁)T₁ / P₁

Let the initial pressure = 10 Psi, and initial temperature = 25⁰C = 298 K

T₂ = (15 + 10) x 298 / 10

T₂ = 745 K = 472 ⁰C

Learn more about temperature here: https://brainly.com/question/25677592

#SPJ1

The proposed sequence of reactions starting from acetylene would be: Acetylene → Vinyl chloride → Ethyl chloride → Ethylene → 1-Butene → cis-2-Butene → cis-3-Heptene

To prepare cis-3-heptene from acetylene, one possible sequence of reactions involves the following steps:

Hydrochlorination of acetylene:

Acetylene (C₂H₂) reacts with hydrogen chloride (HCl) to form vinyl chloride (C₂H₃Cl) in the presence of a catalyst such as mercuric chloride (HgCl₂).

Hydrogenation of vinyl chloride:

Vinyl chloride (C₂H₃Cl) undergoes catalytic hydrogenation, typically using a palladium catalyst, to convert it to ethyl chloride (C₂H₅Cl).

Dehydrohalogenation of ethyl chloride:

Ethyl chloride (C₂H₅Cl) is treated with a strong base, such as potassium hydroxide (KOH), to undergo dehydrohalogenation, resulting in the formation of ethylene (C₂H₄).

Hydroboration of ethylene:

Ethylene (C₂H₄) reacts with borane (BH₃) in the presence of a catalyst such as diborane (B₂H₆) to form 1-butene (C₄H₈).

Isomerization of 1-butene:

1-Butene (C₄H₈) is subjected to isomerization, which involves heating the compound with a catalyst such as phosphoric acid (H₃PO₄), to convert it to cis-2-butene (C₄H₈). Oxymercuration-demercuration of cis-2-butene:

Cis-2-butene (C4H8) is typically oxymercurated using mercuric acetate (Hg(OAc)2) in the presence of water, followed by demercuration with sodium borohydride (NaBH4). yields cis-3-heptene (C7H14).

To know more about acetylene visit :

https://brainly.com/question/14597887

#SPJ4

Oxidized substance: Cu(s), as its oxidation state increases from 0 to +2.
Reduced substance: Ag+(aq), as its oxidation state decreases from +1 to 0. Balanced redox reaction: 2 Ag+(aq) + Cu(s) --> 2 Ag(s) + Cu2+(aq)

To assign oxidation states to the elements in the reaction, we first need to understand the concept of oxidation states. Oxidation state or oxidation number is a number that represents the hypothetical charge on an atom if the electrons in the bonds were assigned completely to the more electronegative atom. In simpler terms, it is the number of electrons an atom would lose or gain to form a stable ion.

In the given reaction, we have the following species:
Ag+(aq) + Cu(s) --> Ag(s) + Cu2+ (aq)
Ag+ - This is an ion, and the charge on the ion is +1. Therefore, the oxidation state of Ag+ is +1.
Cu - This is an elemental metal, and the oxidation state of an elemental metal is always 0.
Ag - This is an elemental metal, and the oxidation state of an elemental metal is always 0.
Cu2+ - This is an ion, and the charge on the ion is +2. Therefore, the oxidation state of Cu2+ is +2.
Now that we have determined the oxidation states of the elements, we can identify which substance gets oxidized and which substance gets reduced. In a redox reaction, the substance that gets oxidized loses electrons, and the substance that gets reduced gains electrons.
In this reaction, Cu is oxidized because its oxidation state changes from 0 to +2. Ag+ is reduced because its oxidation state changes from +1 to 0.

To know more about oxidation visit :-

https://brainly.com/question/25798412

#SPJ11

The buffer solution can absorb up to 1937 grams of HNO3 before one of its components is depleted.

To determine the maximum amount of HNO3 that can be added to the buffer solution without depleting one of its components, we need to calculate the buffer capacity. The buffer capacity is a measure of the amount of acid or base that the buffer solution can absorb without significant change in pH. For a buffer containing equal amounts of acid and conjugate base, the buffer capacity is given by:

β = (2.303 × V × [C]) / (pKa + pH)

where β is the buffer capacity in units of moles of acid or base per liter, V is the volume of the solution in liters, [C] is the total concentration of the buffer components in moles per liter (in this case, [C] = 0.10 M + 0.13 M = 0.23 M), pKa is the acid dissociation constant of the weak acid component of the buffer, and pH is the pH of the buffer solution.

Assuming that the weak acid component of the buffer is the conjugate base, which has a pKa of 4.76, and the buffer solution has a pH of 4.76 (at the midpoint of the buffer range), we can calculate the buffer capacity:

β = (2.303 × 25.0 L × 0.23 M) / (4.76 + 4.76) = 1.23 mol/L

This means that the buffer solution can absorb up to 1.23 moles of acid (or base) per liter before significant changes in pH occur.

To determine the mass of HNO3 that can be added to the buffer solution, we need to convert the buffer capacity from units of moles per liter to units of grams per liter. The molar mass of HNO3 is 63.01 g/mol, so:

β = (1.23 mol/L) × (63.01 g/mol) = 77.49 g/L

Therefore, the buffer solution can absorb up to 77.49 grams of HNO3 per liter before one of the buffer components is depleted. For a 25.0 L solution, the maximum mass of HNO3 that can be added is:

77.49 g/L × 25.0 L = 1937 g

Therefore, the buffer solution can absorb up to 1937 grams of HNO3 before one of its components is depleted.

Learn more about buffer

brainly.com/question/22821585

#SPJ11

The cyclopentadienyl anion has five carbon atoms, each with one unpaired electron in the 2p orbital. The term "p orbital electrons" refers to the electrons found in the p orbitals of an atom. These orbitals are involved in the formation of pi (π) bonds in a molecule.

In the case of the cyclopentadienyl anion, there is a conjugated system of alternating single and double bonds, which allows for the electrons in the p orbitals to be delocalized across the entire ring.

Considering each carbon atom contributes one p orbital electron to the ring, the total number of p orbital electrons in the cyclopentadienyl anion is 5. These 5 p orbital electrons are spread out over the five carbon atoms in the ring, forming a continuous loop of delocalized electrons. This delocalization results in increased stability for the cyclopentadienyl anion, as the electron density is shared across the entire molecule, minimizing the negative charge on any single carbon atom.

In summary, the cyclopentadienyl anion contains 5 p orbital electrons, which are delocalized across the five carbon atoms in the ring, leading to a stable and conjugated system.

To know more about cyclopentadienyl anion, refer to the link below:

https://brainly.com/question/31500734#

#SPJ11

The research described in this scenario represents qualitative research, Qualitative research is a type of research that aims to explore and understand individuals' perspectives, and behaviors in-depth.

Qualitative research is a type of research that aims to explore and understand individuals' perspectives, experiences, and behaviors in-depth. It focuses on gathering rich, descriptive data through methods such as interviews, observations, or focus groups. In this case, the marketing researcher is conducting a focus group interview with working mothers to gain insights into their needs and preferences regarding convenience foods.

A focus group interview involves bringing together a small group of individuals with similar characteristics or experiences to discuss a specific topic. The researcher facilitates the discussion, allowing participants to share their thoughts, opinions, and suggestions. The purpose of the focus group is to generate qualitative data that can provide valuable insights and inform decision-making, such as identifying areas where Kraft can improve their products to better meet the needs of working mothers seeking convenience foods.

To learn more about Qualitative research click here : brainly.com/question/28580938

#SPJ11

According to the collision theory, successful collisions leading to chemical reactions are rare due to the numerous requirements. However, some reactions still occur at room temperature and at reasonable rates.

The collision theory states that for a chemical reaction to occur, molecules must collide with sufficient energy and with the correct orientation. Additionally, they need to overcome the activation energy barrier, which is the minimum energy required for a reaction to proceed. Considering these requirements, the percentage of successful collisions is actually quite small.

However, chemical reactions are still observed at room temperature and some even proceed at reasonable rates. This can be attributed to several factors. Firstly, although the probability of a successful collision is low, the vast number of molecules in a given sample increases the chances of collisions occurring.

Additionally, the presence of catalysts can lower the activation energy, facilitating the reaction and increasing the rate of successful collisions. Furthermore, the use of higher temperatures increases the kinetic energy of the molecules, making it more likely for them to possess the required energy for a successful collision.

Learn more about chemical reactions here:

https://brainly.com/question/29762834

#SPJ11

A cis isomer has two identical atoms or groups on the same side of a double bond.

The number of possible forms of a cis isomer depends on the number of substituents on each end of the double bond. For example, if the two substituents on the double bond are different, only one cis isomer is possible. However, if both substituents are different and there is a third substituent on one of the carbons, two different cis isomers can be drawn.

In general, if there are n substituents on one end of the double bond and m substituents on the other end, the number of possible cis isomers is given by the smaller of n and m. These different forms of cis isomers are not equivalent. They have different physical and chemical properties, such as melting points, boiling points, and reactivity.

To know more about cis isomer,

https://brainly.com/question/31610429

#SPJ11

To find the mass of the sample of silver, we can use the formula: q = mcΔT. Where q is the amount of heat energy absorbed, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

Plugging in the values we have:

255 J = m x 0.235 J/(g°C) x 23.1°C

Simplifying, we get:

255 J = 5.4335 m

Dividing both sides by 5.4335, we get:

m = 46.9 g

Therefore, the mass of the sample of silver is 46.9 g.

To find the mass of the silver sample when the temperature increased by 23.1°C and 255 J of heat was applied, you can use the formula:

Q = mcΔT

where Q is the heat energy (255 J), m is the mass of the sample (in grams), c is the specific heat capacity of the substance (in J/(g°C)), and ΔT is the temperature change (23.1°C).

For silver, the specific heat capacity is 0.235 J/(g°C). Now we can rearrange the formula to solve for the mass (m):

m = Q / (cΔT)

Plugging in the given values:

m = 255 J / (0.235 J/(g°C) × 23.1°C)

m ≈ 47.45 g

The mass of the sample is approximately 47.45 grams.

To know more about temperature visit:

https://brainly.com/question/7490643

#SPJ11

It is important to note that the equilibrium position of a reversible reaction is determined by the equilibrium constant, which depends on the temperature and pressure of the system.

The fictitious reversible reaction involves the reactants A2 and BC forming the products AB and C. In a reversible reaction, the reaction can proceed in both the forward and reverse directions, depending on the conditions. The direction of the reaction is determined by the relative concentrations of the reactants and products, as well as the temperature and pressure of the system.
In this case, removing some B or removing some BC would both drive the reaction towards the reactants side. This is because the concentration of B or BC is decreasing, and therefore, the reaction will shift to produce more of the reactants, A2 and BC. Adding more A2 would not drive the reaction towards the reactants side, as this would increase the concentration of the reactants and shift the reaction towards the products.
It is important to note that the equilibrium position of a reversible reaction is determined by the equilibrium constant, which depends on the temperature and pressure of the system. Therefore, the direction of the reaction can be controlled by adjusting the conditions of the system, such as changing the temperature or pressure.

To know more about Reversible reaction visit:

https://brainly.com/question/16614705

#SPJ11

To provide a concise answer, I'll need the specific structure of the alkyne you are referring to. However, in general, to prepare an alkyne using an acetylide anion and an alkyl chloride, follow these steps:

To prepare the alkyne shown in the provided structure, we need to use a specific acetylide anion and alkyl chloride. The acetylide anion that we need to use is ethynide anion, which has the structure shown in the provided image. The alkyl chloride that we need to use is 1-bromo-2-chloropropane, which has the structure shown below:


In summary, to prepare the alkyne shown in the provided structure, we need to use ethynide anion and 1-bromo-2-chloropropane in a nucleophilic substitution reaction.

To know more about alkyne visit :-

https://brainly.com/question/9620187

#SPJ11

The wavelength of the one line in the emission spectrum that does not appear in the absorption spectrum is 435nm.

The atom only has two energy levels that can absorb energy and produce corresponding absorption lines. Therefore, any emission line that appears in the spectrum must correspond to a transition between one of these two levels and a higher energy level. The emission line that does not appear in the absorption spectrum corresponds to a transition from the higher energy level back down to the lower energy level, bypassing the intermediate levels that produce the absorption lines.

To determine the wavelength of this emission line, we can use the Rydberg formula:

[tex]1/λ = R (1/n₁² - 1/n₂²)[/tex]

where λ is the wavelength of the emission line, R is the Rydberg constant, and n₁ and n₂ are the initial and final energy levels of the transition. Since the emission line in question corresponds to a transition from the higher energy level to the lower energy level, we can set n₁ = 2 and n₂ = 1.

Plugging these values into the Rydberg formula, we get:

[tex]1/λ = R (1/1² - 1/2²)[/tex]

Simplifying this expression, we get:

[tex]1/λ = R (3/4)[/tex]

Multiplying both sides by λ, we get:

[tex]λ = 4/3 R[/tex]

We can look up the value of the Rydberg constant and plug it into this expression to get:

[tex]λ = 434.96 nm[/tex]

So the wavelength of the one line in the emission spectrum that does not appear in the absorption spectrum is approximately 435 nm.

Learn more about wavelength here:

https://brainly.com/question/13533093

#SPJ11

To arrange elements in the increasing order, we first need to know the property. Some of the properties used in the periodic table include atomic radius, electronegativity, ionization energy, electron affinity, and metallic character. , the elements arranged in the increasing order according to atomic radius are hydrogen, helium, lithium, beryllium, boron, carbon, nitrogen, oxygen, fluorine, and neon.

Atomic radius is the distance from the center of the nucleus to the outermost shell of an atom. It is measured in picometers (pm). As we move down a group, the atomic radius increases due to the addition of a new shell, while moving across a period, the atomic radius decreases due to an increase in nuclear charge.
Using this property, we can arrange the elements in the increasing order as follows:
1. Hydrogen - 53 pm
2. Helium - 31 pm
3. Lithium - 152 pm
4. Beryllium - 111 pm
5. Boron - 85 pm
6. Carbon - 77 pm
7. Nitrogen - 75 pm
8. Oxygen - 73 pm
9. Fluorine - 72 pm
10. Neon - 71 pm
for more such questions on  electronegativity

https://brainly.com/question/24977425

#SPJ11

In the combustion of methane, the carbon atom undergoes a hybridization change from sp3 to sp2. In its natural state, carbon has four valence electrons, which occupy the 2s and 2p orbitals. During hybridization, the carbon atom undergoes a rearrangement of these orbitals to form hybrid orbitals, which are a combination of s and p orbitals.

In the case of methane, carbon forms four sp3 hybrid orbitals, which bond with the four hydrogen atoms.
During combustion, methane reacts with oxygen to form carbon dioxide and water. In this reaction, the carbon atom forms double bonds with two oxygen atoms, requiring the use of sp2 hybrid orbitals. This hybridization change allows for the formation of stronger and more stable bonds, which is necessary for the energy-releasing reaction of combustion. Overall, the hybridization change from sp3 to sp2 is a crucial aspect of the combustion of methane. It allows for the formation of stronger bonds, which release energy in the form of heat and light. Understanding the hybridization changes involved in chemical reactions can provide insight into the mechanisms of these reactions, as well as their thermodynamic properties.

Learn more about hybridization here ;

https://brainly.com/question/32107779

#SPJ11

N2 is a neutral molecule with a triple bond between the two nitrogen atoms, which has a bond order of 3, The bond order of N2+ is 1.5.

However, the N2 ion has one less electron than N2, which means that it has a higher bond order due to the decrease in the number of electrons.

To calculate the bond order of N2+, we need to count the total number of valence electrons in the ion and then distribute them among the molecular orbitals.

The molecular orbital diagram for N2+ is:

N2+: (σ1s)2(σ*1s)2(σ2s)2(σ*2s)2(π2px)2(π2py)1

The total number of electrons in N2+ is 14, which includes the removal of one electron from N2.

Using the formula for bond order, we get:

Bond order = (Number of bonding electrons - Number of antibonding electrons) / 2

Bond order = [(2+2+2+1) - (2+2+1)] / 2 = 1.5

To know more about bond order refer here :-

https://brainly.com/question/12447843#

#SPj11

The final Lewis dot structure for C3H8 is:

     H    H    H
      |      |     |
H - C -  C  -C  -  H
     |      |      |
    H    H    H

Here, all the electrons are bonding electrons between (C-C) and (C-H) atoms.

To draw the Lewis dot structure for C3H8, we first need to determine the number of valence electrons in each atom.

Carbon has 4 valence electrons, while hydrogen has 1 valence electron.

Next, we place the carbon atoms in the center of the structure and arrange the hydrogen atoms around them.

Each terminal carbon atom is bonded to 3 hydrogen atoms and the central C-atom is bonded to 2 C and 4 H-atoms.

There are no nonbonding electrons on the carbon or hydrogen atoms.

To know more about the Lewis structure, click below.

https://brainly.com/question/31475706

#SPJ11

The chemical reaction for the formation of Cl₂ from the reaction of OCl- and Cl- in an acidic solution where Cl₂ is the only halogen containing product is:

OCl⁻ + 2Cl⁻ + 2H⁺ → Cl₂ + H₂O

In an acidic solution, OCl- ion undergoes disproportionation reaction and gets reduced to Cl- ion while another Cl- ion gets oxidized to form Cl₂. The overall balanced chemical equation for the reaction can be represented as:

OCl⁻ + 2Cl⁻ + 2H⁺ → Cl₂ + H₂O

In this reaction, the OCl- ion acts as an oxidizing agent, and it oxidizes one of the Cl- ions to form Cl₂. The other Cl- ion gets reduced to Cl₂ by accepting electrons from the H+ ions, which get reduced to form H₂O. Thus, the net reaction results in the formation of Cl₂ as the only halogen containing product in an acidic solution.

To know more about oxidizing agent refer here:

https://brainly.com/question/31117299#

#SPJ11

Genes serve as carriers of heredity from one generation to another.

Genes are segments of DNA that carry the instructions for the development, function, and reproduction of living organisms. They serve as carriers of hereditary information from one generation to the next, allowing for the transmission of traits from parents to offspring.

In sexually reproducing organisms, genes are passed down from both parents through their reproductive cells (gametes), which combine during fertilization to form a new individual with a unique combination of genetic traits. Genes can influence a wide range of traits, such as eye color, height, susceptibility to diseases, and behavioral tendencies.

Genes are passed down from parents to offspring through the process of reproduction, ensuring that certain traits are inherited and preserved over time.

The study of genetics is focused on understanding how genes work and how they are transmitted between generations.

For more question on Genes click on

https://brainly.com/question/3764946

#SPJ11

The minimum number of trials that will have to be done to gather sufficient initial rates data to be able to write the complete rate law for a reaction with only one reactant is 2 (Option B).

This is because we need at least two sets of data with different initial concentrations of the reactant in order to determine the order of the reaction with respect to that reactant. Once we have the order, we can then determine the rate constant by using the rate law equation and plugging in the initial concentrations and corresponding initial rates from the two trials.

Therefore, for a reaction with only one reactant, the minimum number of trials that will have to be done to gather sufficient initial rates data to be able to write the complete rate law is 2, which is option B.

Learn more about number of trials: https://brainly.com/question/31129914

#SPJ11

True. The negative enthalpy of formation of xenon fluorides contributes to their instability.

The instability of xenon fluorides is due to its negative enthalpy of formation, indicating that the reaction is exothermic and energy is released when xenon fluorides are formed. This makes them less stable compared to their reactants.

To know more about xenon flourides visit:

https://brainly.com/question/835196

#SPJ11

True. The instability of xenon fluorides is due to its negative enthalpy of formation.

The enthalpy of formation refers to the energy released or absorbed when a compound is formed from its constituent elements. In the case of xenon fluorides, the energy released during the formation of the compound is less than the energy required to break apart the compound, resulting in an overall negative enthalpy of formation. This means that the formation of the compound is thermodynamically unfavorable, and the compound is therefore unstable and prone to decomposition.

Additionally, the electronegativity difference between xenon and fluorine is significant, which contributes to the instability of xenon fluorides. Therefore, xenon fluorides tend to be highly reactive and explosive, making them difficult to handle and store safely.

To know more about enthalpy visit

https://brainly.com/question/10592122

#SPJ11

To convert the mass of an element to the number of moles in a sample, one must multiply by the inverse of the element's molar mass.

The molar mass of an element is the mass of one mole of that element, expressed in grams. It is numerically equal to the element's atomic mass in atomic mass units (u). The molar mass allows us to convert between the mass of a sample and the number of moles of that element.

Avogadro's number, which is approximately 6.022 x 10²³, represents the number of atoms or molecules in one mole of a substance. Therefore, to convert the mass of a sample of an element to the number of atoms, we need to consider the relationship between the molar mass and Avogadro's number.

By taking the inverse of the molar mass, we obtain the conversion factor that allows us to go from grams to moles. Multiplying the mass of the sample by this conversion factor gives us the number of moles of the element in the sample. To determine the number of atoms, we then multiply the number of moles by Avogadro's number, which gives the number of atoms per mole. Thus, multiplying the mass of the sample by the inverse of the element's molar mass is the correct method to convert to the number of atoms in the sample.

Learn more about number of moles  here

https://brainly.com/question/32351065

#SPJ11