why would 0.10 m nacl solution be hypertonic to a 0.10 m glucose solution

A certain radioactive isotope has a half life of one hour. I you start with 1.0 g of the material at 1:00 P. M. 0.5 grams will be present at 2:00 P.M. on the same day.

Half life is the amount of time required to reduce to one half of its initial value. The symbol of half life is [tex]t_{1/2}[/tex].

It is expressed as:

[tex]N_{t} = N_{0} (\frac{1}{2})^{n}[/tex]

where,

N(t) = quantity remaining

N₀ = initial quantity

n = half life that have passed

Now put the values in above expression we get

[tex]N_{t} = 1.0\ g \times (\frac{1}{2})^{1}[/tex]

     = [tex]\frac{1}{2} g[/tex]

      = 0.5 gram

Thus from the above conclusion we can say that A certain radioactive isotope has a half life of one hour. I you start with 1.0 g of the material at 1:00 P. M. 0.5 grams will be present at 2:00 P.M. on the same day.

Learn more about the Half life here: https://brainly.com/question/25750315

#SPJ4

Considering the definition of ion, an atom with 11 protons and 9 electrons (option A) is an ion since the number of electrons is less than the number of protons, acquiring a positive charge.

An ion is an electrically charged particle that is made up of an atom or molecule that is not electrically neutral, that is, that in its constitution has gained or lost electrons.

In other words, an ion is a molecule or atom that has a positive or negative electrical charge. That is, an ion is an atom whose electrical charge is not neutral.

On the other hand, an atom is made up of a nucleus made up of protons (positively charged) and neutrons (neutrally charged), around which electrons (negatively charged) orbit.

An atom has as many protons as electrons, so the total charge is zero and it is globally neutral.

The loss or gain of electrons allows the atom to acquire an electrical charge, transforming itself into an ion. If the electrical charge is positive, it is called a cation; if it is negative, it is called an anion.

An atom with 11 protons and 9 electrons (option A) is an ion since the number of electrons is less than the number of protons, acquiring a positive charge.

Learn more about ions:

https://brainly.com/question/13692734

https://brainly.com/question/1310794

#SPJ1

Answer:

Explanation:

121) The sugar sucrose has 12 carbon atoms, 22 hydrogen atoms and 11 oxygen

atoms. How would this be written?

A) Co12H22O1  [Co is cobalt]

B) CI2H22011     [Yes]

C) C6H1206       [6 C atoms]

D) CacH1206     [Ca is calcium]

122) How are the elements organized on the periodic table?

A) Atomic Mass  [Yes, from lightest to heaviest]

B) Element Name

C) Symbol

D) No Set Organization

123) Which of the following elements would be considered a compound?

A) CH     [Yes, two or more elements combined]

B) Si       [No]

C)F         [No]

D) O6     [No, multiple atoms, but same element]

124) The formula for water is H2O meaning there are 2 Hydrogen atoms and 1

Oxygen. What is the atomic mass of one molecule to the nearest hundredth?

A) 15.99  

B) 16.99

C) 17.99     [Yes, 16 + 2*1 = 18]

D) 18.99

Answer:

Sucrose to is the substrate of the reaction because is a simple sugar( disaccharide) which produce glucose and fructose in the presence of sucrase or when it is hydrolysed.

The attacking reagent which is an electrophile is H+​; option D.

Electrophiles are electron-loving reagents which attack and attach to electron-rich reagents.

Electrophiles usually are positively charged reagents.

Therefore, the attacking reagent which is an electrophile is H+​.

In conclusion, electrophiles are electron-loving reagents.

Learn more about electrophiles at: https://brainly.com/question/5139016

#SPJ1

At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. 4.25 atm is the  partial pressure of He would give a solubility of 0.200 M.

Henry's Law is a gas law states that at a constant temperature the amount of gas that dissolved in a liquid is directly proportional to the partial pressure of that gas.

The solubility of gas is directly proportional to partial pressure.

It is expressed as:

[tex]S_{\text{gas}} = K_{H} P_{\text{gas}}[/tex]

where,

[tex]S_{\text{gas}}[/tex] = Solubility of gas

[tex]K_{H}[/tex] = Henry's Law constant

[tex]P_{\text{gas}}[/tex] = Partial pressure of gas

Now put the values in above expression we get

[tex]S_{\text{gas}} = K_{H} P_{\text{gas}}[/tex]

0.080M = [tex]K_{H}[/tex] × 1.7 atm

[tex]K_{H} = \frac{0.080\ M}{1.7\ \text{atm}}[/tex]

      = 0.047 M/atm

Now we have to find the partial pressure of He

[tex]S_{\text{gas}} = K_{H} P_{\text{gas}}[/tex]

0.200 M = 0.047 M/atm × [tex]P_{\text{gas}}[/tex]

[tex]P_{\text{gas}} = \frac{0.200 M}{0.047\ \text{M/atm}}[/tex]

       = 4.25 atm

Thus from the above conclusion we can say that At a particular temperature, the solubility of He in water is 0.080 M when the partial pressure is 1.7 atm. 4.25 atm is the  partial pressure of He would give a solubility of 0.200 M.

Learn more about the Henry's Law here: https://brainly.com/question/23204201

#SPJ4

A pure liquid has a constant boiling point (at constant pressure). A change in boiling during distillation is an indication of impurity. The opposite, proposition, however, is not always true, and a constant boiling point does not necessarily mean that the liquid is pure.

This is because, at the boiling point, vapor and liquid are in equilibrium, and, if the composition of the vapor and liquid remains constant through the process, the temperature will also remain constant.

The boiling point can differ by location depending on pressure. Why does not a pure liquid in a distilling flask vaporize all at once whilst the boiling temperature is reached? Additional heat must be supplied for a phase change to occur.

Learn more about a boiling point here https://brainly.com/question/40140

#SPJ4

Answer:

A resistor resists extra electric current.

Answer:

[tex]\fbox {kinetic motion}[/tex]

Explanation:

As the trains are clearly in motion, we can understand the these trains possess kinetic energy, which is by virtue of a motion of a body.

Answer:

type of energy that two train have are kinetic energy

The [tex]Br^{-}[/tex] describes the reducing agent in the reaction below.

[tex]Cl_{2} (aq) + 2Br^{-} (aq)[/tex] → [tex]2Cl^{-}(aq) + Br_{2}( aq)[/tex]

Reducing agent is the species in which oxidation is takes place. Reducing agent is the species in which loss of electrons is takes place. In the above reaction bromine ion in left hand side of the reaction loss electron to become bromine atom. So, bromine ion is reducing agent.

Oxidizing agent is the species in which reduction is takes place. Oxidizing agent is the species in which gain of electrons is takes place. In the above reaction chlorine atom in right hand side of the reaction gain electron to become chlorine ion. So, chlorine atom is reducing agent.

learn about reduction

https://brainly.com/question/14698511

#SPJ4

Answer:

L = mol solute / M

Explanation:

To rewrite the equation for liters (L), you need to:

M = mol solute / L                              <----- Given equation

M x L = mol solute                             <----- Multiply both sides by L

L = mol solute / M                              <----- Divide both sides by M

Answer:

B.) 2.92

Explanation:

Tp find the mass of H₂ produced, you need to (1) convert grams AlCl₃ to moles AlCl₃ (via molar mass), then (2) convert moles AlCl₃ to moles H₂ (via mole-to-mole ratio from equation coefficients), and then (3) convert moles H₂ to grams H₂ (via molar mass). It is important to arrange the ratios/conversions in a way that allows for the cancellation of units.

Molar Mass (AlCl₃): 26.982 g/mol + 3(35.453 g/mol)

Molar Mass (AlCl₃): 133.341 g/mol

2 Al + 6 HCl ---> 2 AlCl₃ + 3 H₂

Molar Mass (H₂): 2(1.008 g/mol)

Molar Mass (H₂): 2.016 g/mol

129 g AlCl₃           1 mole              3 moles H₂             2.016 g
------------------  x  ------------------  x  ---------------------  x  ---------------  =
                            133.341 g          2 moles AlCl₃          1 mole

=  2.93 g H₂

*our answers are most likely different due to using slightly different molar masses

Answer:

I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.

Explanation:

I used this and scored 100% but if you copy and paste they will flag you for plagiarsm so make sure to rewrite it in your own words.

I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.

Chemically known as CH3COONa, sodium acetate is a hygroscopic powder that is very water soluble. The addition of sodium acetate to products like heating pads, food, industries, and concrete is possible.

When administered intravenously, sodium acetate plays a critical role in medicine as an electrolyte replenisher. It is mostly recommended to treat hyponatremic patients' sodium levels. Additionally, it can be used to alkalinize urine and treat metabolic acidosis.

In patients with limited or no oral intake, salt should be added to high volumes of intravenous fluids to prevent or treat hyponatremia. for the patient's needs cannot be addressed by conventional electrolyte or nutrient solutions, it is also helpful as an addition for creating customized intravenous fluid formulas.

Therefore, I dropped a crystal of sodium acetate into the solution it immediately became cloudy again, it became supersaturated.

To learn more about Sodium acetate, refer to the link:

https://brainly.com/question/12924347

#SPJ2

Explanation:

Proton is one of the subatomic particles which has a positive charge. The number of protons present will give the atomic number of the chemical element. Every element will have a unique atomic number. Thus, we can say that protons will determine the identity of an element.

The mass (in grams) of precipitate is 0.6386 gram.

Calculation,

To find the mass of precipitate, first we have to find the precipitate. So, the chemical  reaction when cesium hydroxide react to large excess of [tex]TiSO_{4}[/tex].

Mole of cesium hydroxide = given mass/molar mass = 2.34 gm/ 149.912 g/mol= 0.0156 moles

[tex]2CsOH+TiSO_{4}[/tex]→[tex]Ti(OH)_{2} +Cs_{2} SO_{4}[/tex]

So, mole ratio 2: 1

It means two moles of cesium hydroxide required to form one mole of titanium hydroxide.

To produce 0.0156 moles of cesium hydroxide = 0.0156 moles×1 mole/2

Mole of titanium hydroxide = 0.0078 mole

Mole of titanium hydroxide = given mass/molar mass of titanium hydroxide

Mole of titanium hydroxide = given mass/81.82 g/mol = 0.0078 mole

Mass of titanium hydroxide = 0.0078 mole ×81.88 g/mol  = 0.6387 gm

learn about Precipitation

https://brainly.com/question/20925010?

#SPJ4

The mass of oxygen gas is 26.0 g.

Given,

Volume (V) = 25.0 L

665

Pressure (P) = 665 torr =

760 atm = 0.875 atm

Temperature (T) = 55 C = (55+2730) K = 328 K

Now using the Ideal gas law, calculate the mole of oxygen gas (02)

PV = nRT

atm . L

0.875 atm x 25.0 L = n x 0.082-

X 328K

mole . K

n = 0.813 mole

Using the molar mass of Oz = 32.0 g/mole, Calculate the mass of Oz

mass = 0.813 mole x 32.0 mole

mass = 26.016 g

mass = 26.0 g

The answer is 26.0 g.

Learn more about Ideal gas law here: https://brainly.com/question/20212888

#SPJ4

Answer:

the number of chlorine  molecules  in  6.5  moles  of  chlorine  is  calculated  as  follows

by  use  of Avogadro  constant  that  is  1mole =  6.02  x10^23    molecules

what  about  6.5  moles

6.5  x  (  6.02x 10^23)=  3.913  x10^24

The "molecule a" referred to ATP in the equation.

So, option A is correct one.

The equation is given as,

[tex]C_{6} H_{12} O_{6}+ 6O_{2}[/tex] → [tex]6CO_{2}+ 6H_{2}O + ATP[/tex]

The above equation indicates the respiration activities in the plants.

The aerobic respiration takes place in the Mitochondria and which requires oxygen and glucose and produces carbon dioxide , water and energy.

The energy is in the form of  ATP. The pull form of ATP is adenosine triphosphate. The ATP is also called energy carrier because it found in the cells of the all living organism and this molecule carries energy.

To learn more about aerobic respiration

https://brainly.com/question/12605249

#SPJ4

The statement is False.

Ethanol is one of many toxic substances found in tobacco smoke.

Ethanol is used in the manufacture of drugs, plastics, lacquers, polishes, plasticizers, and cosmetics. Ethanol is utilized in remedy as a topical antiinfective, and as an antidote for ethylene glycol or methanol overdose.

Ethanol is a natural chemical compound. it's far simple alcohol with the chemical formula C₂H₆O. Its system can be additionally written as CH ₃−CH ₂−OH or C ₂H ₅OH and is frequently abbreviated as EtOH. Ethanol is a risky, flammable, colorless liquid with a characteristic wine-like smell and pungent taste.

Within the worst instances, there can also be respiratory problems, low blood strain, incontinence coronary heart troubles, blood troubles, liver damage, and loss of life. Ethanol can also dry out and worsen the skin; there may be aches, redness, and swelling. Eye publicity to ethanol also can purpose tearing, burning, and stinging.

Learn more about Ethanol here https://brainly.com/question/842893

#SPJ4

The % V/V concentration of a 180-mL disinfectant solution containing 85 mL of isopropyl alcohol is 47 % V/V.

It refers to the milliliters of solute for every 100 milliliters of solution.

We have 180 mL of a disinfectant solution that contains 85 mL of isopropyl alcohol (solute).

The % V/V concentration of this solution is:

% V/V = (mL solute/mL solution) × 100% =

% V/V = (85 mL/180 mL) × 100% = 47% V/V

Learn more about % V/V here: https://brainly.com/question/17055828

#SPJ1

Answer:

2,282 cm³

Explanation:

If all other variables are being held constant, you can find the new volume of the balloon using the Charles' Law equation. The equation looks like this:

V₁ / T₁ = V₂ / T₂

In this equation, "V₁" and "T₁" represent the initial volume and temperature. "V₂" and "T₂" represent the final volume and temperature. Before you can solve for the new volume, you need to convert Celsius to Kelvin (negative values do not work in this equation). This can be done by adding 273.15 to each temperature.

V₁ = 2600 cm³                                    V₂ = ? cm³

T₁ = 21 °C + 273.15 = 294.15 K           T₂ = -15 °C + 273.15 = 258.15 K

V₁ / T₁ = V₂ / T₂                                               <----- Charles' Law

(2600 cm³) / (294.15 K) = V₂ / (258.15 K)      <----- Insert values

8.839 = V₂ / (258.15 K)                                   <----- Simplify left side

2282 = V₂                                                      <----- Multiply both sides by 258.15

If chemical A has a toxicity level of one and chemical B has a toxicity level of two and the mixture of these two chemicals has a toxicity level of three, it means that the mixture of these two chemicals form a synergistic mixture.  This is condition is known as synergism.

A synergistic effect is exerted when a greater effect is exerted than the added effect of both the chemicals together. This is applicable for toxic chemicals as well as non-toxic chemicals. Synergism can be dangerous in the case of both toxicology or chemicals in general. The greater effect of toxic chemicals can result in a dangerous mixture, which could prove to have fatal effects in many cases.  The opposite of synergistic effect is antagonistic effect. The antagonistic effect is the effect where the overall effect of these two chemicals would be less than the sum of the effects imparted by the individual chemicals.

Learn more about synergism here-

https://brainly.com/question/14317079

#SPJ4

Moles of diprotic acid present were:

A mole of diprotic acid contains 0.0023 moles [tex]H_{2}A[/tex].

Law of dilution:

Titrations are conducted using the law of dilution.

The number of moles of solute divided by the arrangement's volume in liters is known as molarity.

The number of moles per liter of solution is referred to as molarity. Additionally, we write it as M. Furthermore, we employ the following equation to determine molarity:

Molarity = moles of solute/liter of solution.

Calculation:

Moles of acid = moles of base

n = M/V

Moles of [tex]H_{2}A[/tex] = Moles of NaOH used

Therefore,  0.100 x 0.02258L = 0.0023 mol [tex]H_{2}A[/tex]

Learn more about molarity here,

https://brainly.com/question/15522110

#SPJ4

The volume measured using such a cylinder will be reported to the nearest 10th mL.

10 mL graduated cylinders are always read to the nearest two decimal places.

100 mL graduated cylinders are always read to the nearest 1 decimal place. The nearest 1 decimal place is the same thing as the nearest 10th.

Thus, a reading made using a 100mL increment graduated cylinder would be reported to the nearest 10th mL.

More on cylinder graduation can be found here: https://brainly.com/question/14427988

#SPJ1

Answer: 60.5%

Explanation:

When 30.0 g of carbon is heated with silicon dioxide, 28.2 g of carbon monoxide is produced.  60.5% is the percent yield of carbon monoxide for this reaction.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield times by 100% divided by the experimental yield. The percent yield equals 100% if the theoretical and actual yields are equal.

SiO₂(s) + 3C(s)→ SiC(s) + 2CO(g)​

moles of carbon =30.0 / 12=2.5moles

3 moles of carbon give 1 moles of SiC

1 mole of carbon will give 1/3 moles of SiC

2.5 mole of carbon will give (1/3)×2.5 =0.83 moles of SiC

mass of  SiC = 0.83× 40.09=33.27

percent yield = (actual yield/theoretical yield) x 100%

percent yield= (28.2 / 33.27)x 100%

percent yield = 60.5%

To know more about percent yield, here:

https://brainly.com/question/17042787

#SPJ2

Answer: concentration

Explanation:

This is a fact.

The density of the helium gas is 0.487 g/L

Calculation,

According to Ideal gas equation,

PV = nRT             ...(I)

The values of some terms are given as,

P is the pressure = 3 atm

V is the volume = ?

T is the temperature = 27°C = 27°C + 273 = 300 K

R is the universal gas constant = 0.0821 L∙atm∙mol−1∙K−1

n is the number of moles of helium = given mass of helium/molar mass of helium

n is the number of moles of helium = 1 g/ 4 g/mole = 0.25 mole

So, by putting the value of all data given in the equation (i) we get,

3 atm × V = 0.25 mol ×0.0821 L∙atm∙mol−1∙K−1×300 K

V =  0.25 mol ×0.0821 L∙atm∙mol−1∙K−1×300 K/3 atm

V = 2.05 L

The formula of density = given mass /volume = 1g/2.05 L = 0.487 g/L

learn about density

https://brainly.com/question/15164682

#SPJ4

This because the concentration gradient does not favor diffusion of potassium ions  through the K leak channels.

Diffusion is the movement of molecules of substances from regions of high concentration to regions of low concentration.

Diffusion of ions through the cell membrane takes places through leak channels due to concentration gradient.

The diffusion of potassium ions in and out of the cell depends on the extracellular concentration of potassium ions.

When extracellular concentration of potassium ions increases, it reduces the net diffusion of K out of the neuron through the k leak channels because the concentration gradient does not favor outward movement of potassium ions.

In conclusion, the diffusion of potassium ions through K leak channels depends on concentration gradient.

Learn more about diffusion at: https://brainly.com/question/7161064

#SPJ1

Blood Alcohol Concentration (BAC) is defined as the ratio of alcohol in the system to Blood in the system.

Blood/Breath Alcohol concentration (BAC) is the quantity of alcohol within the bloodstream or on one's breath. BAC is expressed because of the weight of ethanol, in grams, in 100 milliliters of blood, or 210 liters of breath. BAC can be measured with the aid of breath, blood, or urine exams.

Blood alcohol content material shows the percentage of alcohol that is in a person's bloodstream. BAC is crucial to prosecutors because they accept it as true with it displays how tons an individual is impaired via alcohol.

Human beings making their own alcoholic beverages regularly calculate the percentage of alcohol by way of extent by way of measuring their relative density with a hydrometer or their sugar content material with a refractometer.

Learn more about alcohol here: https://brainly.com/question/24129981

#SPJ4

Thus all ionic compounds are solids at room temperature and generally they have very high melting and boiling points.

There are strong electrostatic attractive forces between the positive and negative ions in ionic solids. These extremely powerful forces must be overcome in order to melt the solid. As a result, all ionic compounds are solids at room temperature and have extremely high melting and boiling points.

E.g. MgF2 has a melting point of. 1261°C and a boiling point of 2239°C

The strong forces between the ions are difficult to break, which also explains why ionic compound crystals are hard. Ionic substances form massive ionic lattices with oppositely charged ions.

Ionic compounds are made up of charged particles known as ions. It has a massive lattice structure with strong electrostatic attraction forces. Giant ionic lattices are regular structures found in ionic compounds.

In Chemistry, some examples of ionic compounds are:

Learn more about ionic compounds:

https://brainly.com/question/9167977

#SPJ4