Write an explicit formula for the sequence 8,6,4,2,0,..., then find a14.a. an=−2n+10;−16b. an=−2n+8;−18c. an=−2n+8;−20d. an=−2n+10;−18

If sample evidence is inconsistent with the null hypothesis, we reject the null hypothesis.

Rejecting the null hypothesis means that we have found significant evidence that the observed data is unlikely to have occurred by chance alone, assuming the null hypothesis is true. It suggests that there is a significant difference or relationship present in the population being studied. This decision is based on the principles of hypothesis testing and statistical inference, where we set a significance level and compare the observed data to the expected outcomes under the null hypothesis.

If the evidence contradicts the null hypothesis beyond a reasonable doubt, we reject it in favor of an alternative hypothesis.

Learn more about data here: brainly.com/question/32386318

#SPJ11

The value of a in the given quadrilateral RSTU is 0

Given that Quadrilateral RSTU is a rectangle,

RT = a + 34, and SU = 2a.

To find the value of a, we need to use the property of a rectangle, which states that opposite sides are equal.

Therefore, RS = TU and RU = ST.

Using the given information, we can write the following equations:

RS = TU (opposite sides of a rectangle are equal)

RT + TU = RU + ST (the sum of opposite sides of a rectangle are equal)

From the second equation, we can substitute the values of RT and TU:

RT + TU = a + 34 + 2a = 3a + 34

RU + ST = RS = 2(RT) = 2(a + 34)

Now, equating these two expressions:

3a + 34 = 2(a + 34)

Simplifying the equation, we get:

a + 34 = 34

Therefore, a = 0

Substituting the value of a in RT = a + 34, we get RT = 34, and substituting the value of a in SU = 2a, we get SU = 0.

The value of a is 0.

To know more about quadrilateral visit:

https://brainly.com/question/29934440

#SPJ11

Hence, the width of the envelope is 4 cm and the length of the envelope is 8 cm.  

Given that an envelope is 4 cm longer than it is wide and the area is 36 cm², we need to find the length and width of the envelope.

To find the solution, Let us assume that the width of the envelope is x cm.

Then, the length will be (x + 4) cm.

Now, Area of the envelope = length × width(x + 4) × x

= 36x² + 4x - 36

= 0x² + 9x - 4x - 36

= 0x(x + 9) - 4(x + 9)

= 0(x - 4) (x + 9)

= 0x

= 4, - 9

The width of the envelope cannot be negative, so we take x = 4.

Therefore, the width of the envelope = x = 4 cm

And the length of the envelope is (x + 4) = 8 cm

To know more about width visit:

https://brainly.com/question/30282058

#SPJ11

The set {y1, y2} of solutions of a second-order linear homogeneous differential equation is linearly independent if and only if the Wronskian is not identically equal to zero.

In a second-order linear homogeneous differential equation, the set {y1, y2} represents two solutions. To determine if these solutions are linearly independent, we examine the Wronskian, denoted as W(y1, y2). The Wronskian is calculated as the determinant of the matrix formed by the solutions and their derivatives.

If the Wronskian is not identically equal to zero, it implies that the determinant is non-zero for at least one value of the independent variable. This condition ensures that the solutions {y1, y2} are linearly independent, meaning that no linear combination of the solutions can yield the zero function except when the coefficients are all zero.

On the other hand, if the Wronskian is identically equal to zero for all values of the independent variable, it implies that the solutions are linearly dependent. In this case, there exists a non-trivial linear combination of the solutions that yields the zero function.

Therefore, the set {y1, y2} of solutions is linearly independent if and only if the Wronskian is not identically equal to zero in a second-order linear homogeneous differential equation.

Learn more about linear independence

brainly.com/question/30884648

#SPJ11

The given series is ∑(n=0 to infinity) ((-1)^n * 5^n * x^4n) / n!. This is the Maclaurin series expansion of the function f(x) = e^(-5x^4).

By comparing with the Maclaurin series expansion of e^x, we can see that the sum of the given series is f(1) = e^(-5).
Therefore, the sum of the series is e^(-5).
The given series is a sum of terms in the form:
Σ(−1)^n * 5n * x^(4n) * n! for n = 0 to ∞
Unfortunately, this series does not have a closed-form expression or a simple formula for finding the sum, since it involves alternating signs, factorials, and exponential terms. To find an approximate sum, you can calculate the first few terms of the series and observe the behavior or use numerical methods to estimate the sum.

To know more about  Maclaurin series visit:

https://brainly.com/question/31745715

#SPJ11

From the formula of expansion series for [tex]e^x[/tex], the sum of series, [tex]\sum_{n = 0}^{\infty} (-1)^n \frac{5^n x^{4n}}{n!} \\ [/tex] is equals to the [tex] e^{-5x⁴}[/tex].

A series in mathematics is the sum of the serval numbers or elements of the sequence. The number or elements are called term of sequence. For example, to create a series from the sequence of the first five positive integers as 1, 2, 3, 4, 5 we will simply sum up all. Therefore, the resultant, 1 + 2 + 3 + 4 + 5, form a series. We have a series, [tex]\sum_{n= 0}^{\infty} (-1)^n \frac{5^n x^{4n}}{n!} \\ [/tex].

The sum of a series means the total list of numbers or terms in the series sum up to. Using the some known formulas of series, like [tex]1 + x + \frac{x²}{2!} + ... + \frac{x^n}{n!}+ ... = \sum_{n = 0}^{\infty } \frac{ x^n}{n!} = e^x \\ [/tex] Similarly, [tex]1 - x + \frac{x²}{2!} - ... + \frac{x^n}{n!}+ ... = \sum_{n = 0}^{\infty } (-1)^n \frac{ x^n}{n!} = e^{-x } \\ [/tex] Rewrite the expression for provide series as [tex]\sum_{n = 0}^{\infty} (-1)^n \frac{(5x⁴)^n}{n!} \\ [/tex]. Now, comparing this series to the series of e^{-x}, here x = 5x⁴ so, we can write the sum of series as [tex]\sum_{n = 0}^{\infty} (-1)^n \frac{(5x⁴)^n}{n!} = e^{-5x⁴} \\ [/tex]. Hence, required value is [tex]e^{ - 5x^{4} } [/tex].

For more information about series, visit :

https://brainly.com/question/17102965

#SPJ4

Complete question:

find the sum of the series

[tex]\sum_{n = 0}^{\infty} (-1)^n \frac{5^n x^{4n}}{n!} \\ [/tex].

Answer:

1600 milliliters of perfume

Step-by-step explanation:

2 cases x 10 bottles/case x 80 ml / bottle = 1600 milliliters of perfume

To prove that xlogx is o(x^2), we need to show that there exists a positive constant c and a positive integer N such that for all x greater than N, we have:

|xlogx| ≤ cx^2

Let's start by rewriting xlogx as:

xlogx = xlnx

Now we can use integration by parts to find the antiderivative of xlnx:

∫xlnxdx = x^2/2 * ln(x) - x^2/4 + C

where C is the constant of integration. Since ln(x) grows slower than any positive power of x, we can see that xlogx is O(x^2).

To prove that x^2 is not o(xlog(x)), we need to show that for any positive constant c, there does not exist a positive integer N such that for all x greater than N, we have:

|x^2| ≤ c|xlogx|

Assume that such a constant c and integer N exist. Then, we have:

|x^2| ≤ c|xlogx|

Dividing both sides by |xlogx| (which is positive for x > 1), we get:

|x|/|logx| ≤ c

As x approaches infinity, the left-hand side of this inequality approaches infinity, while the right-hand side remains constant.

Therefore, the inequality cannot hold for large enough x, and we have shown that x^2 is not o(xlog(x)).

To know more about positive integer refer here:

https://brainly.com/question/18380011

#SPJ11

1. X does not have a binomial distribution.

2. X cannot have a binomial distribution.

Part 1: The random variable X do not have a binomial distribution.

Part 2: The random variable is not binomial because the first condition for a binomial distribution does not hold. A binomial distribution requires a fixed number of trials, but in this case, the number of students chosen from the Statistics class is not fixed, but rather a random variable itself. Therefore, X cannot have a binomial distribution.

To know more about binomial distribution refer here:

https://brainly.com/question/29163389

#SPJ11

The coefficient of determination is approximately 0.1348.

The coefficient of determination, denoted as R-squared, is a measure of how well the regression line (i.e., the line of best fit) fits the observed data points. It is calculated as the ratio of the explained variance to the total variance.

The coefficient of determination is the ratio of the explained variation to the total variation. It is calculated as follows:

R² = SS(regression) / SS(total)

From the ANOVA table, we have:

SS(regression) = 78.43

SS(total) = 582.19

Therefore, the coefficient of determination is: R² = 78.43 / 582.19 ≈ 0.1348

Learn more about coefficient of determination at https://brainly.com/question/13409818

#SPJ1

(a) False. If a value is within a 95% confidence interval, it means there is a 95% chance that the true parameter falls within that interval. If we increase the confidence level to 99%, the interval becomes wider and more inclusive, so there is a higher chance that the true parameter falls within that interval.

However, it is possible for a value to be within a 95% confidence interval but not within a 99% confidence interval, especially if the sample size is small.

(b) False. Decreasing the significance level (α) means that we are setting a stricter threshold for rejecting the null hypothesis.

This reduces the probability of making a Type 1 Error (rejecting the null hypothesis when it is actually true), but increases the probability of making a Type 2 Error (failing to reject the null hypothesis when it is actually false).

(c) False. Failing to reject the null hypothesis does not necessarily mean that the null hypothesis is true. It simply means that we do not have enough evidence to reject it based on our sample data.

The true population proportion could be any value between 0 and 1, including 0.5.

(d) True. With large sample sizes, even small differences between the null value and the observed point estimate, a difference often called the effect size, will be identified as statistically significant.

This is because larger sample sizes provide more precise estimates of the population parameters, and increase the power of the statistical test to detect differences between the null and alternative hypotheses.

To know more about confidence interval refer here

https://brainly.com/question/24131141#

#SPJ11

The df values for the f-ratio for the axb interaction in this experiment would be 28.

To determine the df values for the f-ratio for the axb interaction in this experiment, we first need to calculate the total number of observations in the study. With 3 levels of factor a and 3 levels of factor b, there are a total of 9 possible treatment conditions. With a sample of n = 8 in each treatment condition, there are a total of 72 observations in the study.

Next, we need to calculate the degrees of freedom for the axb interaction. This can be done using the formula dfaxb = (a-1)(b-1)(n-1), where a is the number of levels of factor a, b is the number of levels of factor b, and n is the sample size.

In this case, a = 3, b = 3, and n = 8, so dfaxb = (3-1)(3-1)(8-1) = 2 x 2 x 7 = 28.

Therefore, the df values for the f-ratio for the axb interaction in this experiment would be 28. This indicates the amount of variability in the data that can be attributed to the interaction between factor a and factor b, after accounting for any main effects. A larger f-ratio with a corresponding smaller p-value would suggest a more significant interaction effect.

To know more about df values, refer to the link below:

https://brainly.com/question/28236335#

#SPJ11

The equation of p(x) after the translation four units up and six units left is given as follows:

q(x) = p(x + 6) + 4.

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

The equation of q(x) after the translation up is given as follows:

q(x) = p(x) + 4.

The equation of q(x) after the translation left is given as follows:

q(x) = p(x + 6) + 4.

More can be learned about translations at brainly.com/question/28174785

#SPJ1

Answer:

[tex]\huge\boxed{\sf x \approx 5.2}[/tex]

Step-by-step explanation:

According to the statement:

x² = 3 × 9

x² = 27

√x² = √27

[tex]\rule[225]{225}{2}[/tex]

the new coordinates of vertex A are (0,0), vertex B are (0,7.5), vertex C are (12.5,7.5), and vertex D are (12.5,0).

The vertices of quadrilateral ABCD are given as A(0,0), B(0,3), C(5,3), and D(5,0). We need to find the new vertices of the quadrilateral after it has undergone a dilation with a scale factor of 2.5.

The dilation of an object by a scale factor k results in the image that is k times bigger or smaller than the original object depending on whether k is greater than 1 or less than 1, respectively. Therefore, if the scale factor of dilation is 2.5, then the image would be 2.5 times larger than the original object.

Given the coordinates of the vertices of the quadrilateral, we can use the following formula to calculate the new coordinates after dilation:New Coordinates = (Scale Factor) * (Old Coordinates)Here, the scale factor of dilation is 2.5, and we need to find the new coordinates of all the vertices of te quadrilateral ABCD.

Therefore, we can use the above formula to calculate the new coordinates as follows:

For vertex A(0,0),New x-coordinate = 2.5 × 0 = 0New y-coordinate = 2.5 × 0 = 0Therefore, the new coordinates of vertex A are (0,0).

For vertex B(0,3),New x-coordinate = 2.5 × 0 = 0New y-coordinate = 2.5 × 3 = 7.5Therefore, the new coordinates of vertex B are (0,7.5).

For vertex C(5,3),New x-coordinate = 2.5 × 5 = 12.5New y-coordinate = 2.5 × 3 = 7.5Therefore, the new coordinates of vertex C are (12.5,7.5).

For vertex D(5,0),New x-coordinate = 2.5 × 5 = 12.5New y-coordinate = 2.5 × 0 = 0Therefore, the new coordinates of vertex D are (12.5,0).

Therefore, the vertices of the quadrilateral after dilation with a scale factor of 2.5 are:A(0,0), B(0,7.5), C(12.5,7.5), and D(12.5,0)

Therefore, the new coordinates of vertex A are (0,0), vertex B are (0,7.5), vertex C are (12.5,7.5), and vertex D are (12.5,0).

To know more about quadrilateral visit:

brainly.com/question/29934440

#SPJ11

(a) The joint probability table for C and R:

       | R=1 | R=2 | R=3 | R=8 | Marginal P(R)

--------|-----|-----|-----|-----|--------------

C=0 (Mac)|  1/6|  2/6|  1/6|  2/6|      6/6 = 1

C=1 (PC) |    0|    0|  1/6|    0|      1/6

--------|-----|-----|-----|-----|--------------

Marginal|  1/6|  2/6|  2/6|  2/6|         1

P(C)

The marginal probability mass functions are given by the sum of the probabilities in each row and column.

(b) E(C) is the expected value of C, which is the weighted average of the possible values of C weighted by their probabilities:

E(C) = (0 * 1/6) + (1 * 1/6) = 1/6.

E(R) is the expected value of R, which is the weighted average of the possible values of R weighted by their probabilities:

E(R) = (1 * 1/6) + (2 * 2/6) + (3 * 2/6) + (8 * 1/6) = 2.67.

(c) The covariance of C and R measures the extent to which C and R vary together. A positive covariance indicates that as C increases, R tends to increase, and vice versa. A negative covariance indicates an inverse relationship. A covariance of zero indicates no linear relationship.

(d)

(i) The table of the joint probability distribution of M and W:

       | W=2 | W=3 | Marginal P(W)

--------|-----|-----|--------------

M=1 (Mac)|  1/4|    0|       1/4

M=2 (Mac)|    0|  2/4|       2/4

M=8 (Mac)|  1/4|    0|       1/4

--------|-----|-----|--------------

Marginal|  2/4|  2/4|         1

P(M)

(ii) P(W > M) = P(W=3) = 2/4 = 1/2.

(iii) To calculate the correlation between W and M, we would need additional information such as the variance of W and M and the covariance between W and M.

Learn more about probability  here:

https://brainly.com/question/30075742

#SPJ11

Verification of homogeneous linear system for vector X is given by  X' = AX and X is a solution of homogeneous linear system equals to [5cos(t) , 3cos(t) - sin(t)e].

Homogeneous linear system.

dx = -2x+5y dt

dy = -2x + 4y dt

To verify that the vector X is a solution of the given homogeneous linear system,

Substitute it into the system and see if it satisfies both equations.

Substituting x = 5cos(t) and y = 3cos(t) - sin(t)e into the system, we get,

dx/dt = -2x + 5y

        = -2(5cos(t)) + 5(3cos(t) - sin(t)e)

        = -10cos(t) + 15cos(t) - 5sin(t)e

        = 5cos(t) - 5sin(t)e

dy/dt = -2x + 4y

        = -2(5cos(t)) + 4(3cos(t) - sin(t)e)

       = -10cos(t) + 12cos(t) - 4sin(t)e

       = 2cos(t) - 4sin(t)e

This implies,

X' = [dx/dt, dy/dt]

   = [5cos(t) - 5sin(t)e, 2cos(t) - 4sin(t)e]

And the coefficient matrix A is,

A = [tex]\left[\begin{array}{ccc}-2&5\\-2&4\end{array}\right][/tex]

Now calculate AX,

AX = [-2(5cos(t)) + 5(3cos(t) - sin(t)e), -2(5cos(t)) + 4(3cos(t) - sin(t)e)]

    = [-10cos(t) + 15cos(t) - 5sin(t)e, -10cos(t) + 12cos(t) - 4sin(t)e]

    = [5cos(t) - 5sin(t)e, 2cos(t) - 4sin(t)e]

Now, X' = AX,

so X is indeed a solution of the given homogeneous linear system.

Learn more about homogeneous linear system here

brainly.com/question/15878087

#SPJ4

Answer: not the process but hope this helps

If he ran 45 minutes each day, 5 days each week, for 12 weeks, Daniel's average rate in laps per hour was 40 laps.

To calculate the average rate in laps per hour, we need to convert all of the given time measurements to hours.

First, we know that Daniel ran 45 minutes per day, which is equivalent to 0.75 hours per day (45 ÷ 60 = 0.75).

Next, we know that he ran for 5 days each week for 12 weeks, so he ran for a total of 5 x 12 = 60 days.

Therefore, his total time spent running in hours is 60 x 0.75 = 45 hours.

Finally, we know that he ran 1,800 laps in that time. To find his average rate in laps per hour, we divide the total number of laps by the total time in hours:

1,800 laps ÷ 45 hours = 40 laps per hour

To learn more about average click on,

https://brainly.com/question/865468

#SPJ1

Answer:

(x+12)(x+4)

(x-8)(x+5)

(m-7)(m-9)

Step-by-step explanation:

Helping in the name of Jesus.

The marginal pmfs can be used to calculate the mean and variance of x and y.

The given joint pmf indicates that x and y are discrete random variables taking values from 1 to 10 with a probability of 0.01. The pmf is 0 for all other values of x and y.

The sum of all the probabilities should be equal to 1, which is satisfied in this case. The joint pmf can be used to calculate the probability of any particular value of x and y.

For example, the probability of x=3 and y=5 is 0.01. The marginal pmf of x and y can be obtained by summing the joint pmf over the other variable.

The marginal pmf of x is obtained by summing the joint pmf over all values of y, while the marginal pmf of y is obtained by summing the joint pmf over all values of x.

To learn more about : marginal pmfs

https://brainly.com/question/30901821

#SPJ11

The joint distribution of x and y is discrete, random, and characterized by a constant probability mass function. The joint PMF is 0 for all other values of X and Y.


Given that X and Y are discrete random variables with a joint probability mass function (PMF) P(X, Y) is defined as:

P(X, Y) = 0.01 for X = 1, 2, ..., 10 and Y = 1, 2, ..., 10
P(X, Y) = 0 otherwise

We can interpret this joint PMF as follows:

1. "Discrete" means that both X and Y can only take on a finite set of values (in this case, integers from 1 to 10).
2. "Random" implies that X and Y are variables whose outcomes depend on chance.
3. "Variable" refers to X and Y being numerical quantities that can vary based on the outcomes of an experiment or random process.

The joint pmf (probability mass function) of x and y is given as px,y (x, y) = 0.01 x = 1, 2 ..., 10, y = 1, 2 ..., 10, 0 otherwise. This means that the probability of any particular (x, y) pair occurring is 0.01 (which is a constant value across all pairs). However, this only applies to pairs where x and y fall within the specified ranges (1 to 10). For all other pairs, the probability is 0.

The joint PMF, P(X, Y), describes the probability that both random variables X and Y simultaneously take on specific values within their respective domains. In this case, the probability is 0.01 when both X and Y are integers between 1 and 10 (inclusive). The joint PMF is 0 for all other values of X and Y.

Learn more about joint distribution :

brainly.com/question/14310262

#SPJ11

The volume of the ellipsoid is 8π.

The equation of the ellipsoid is x^2/4 + y^2/1 + z^2/9 = 1. We can find the volume of the ellipsoid using the formula:

V = (4/3)πabc

where a, b, and c are the semi-axes of the ellipsoid.

To find the semi-axes, we can rewrite the equation of the ellipsoid as:

x^2/1^2 + y^2/2^2 + z^2/3^2 = 1

Comparing this to the standard form of the ellipsoid,

x^2/a^2 + y^2/b^2 + z^2/c^2 = 1

we can see that a = 1, b = 2, and c = 3.

Substituting these values into the formula for the volume, we get:

V = (4/3)π(1)(2)(3) = 8π

Therefore, the volume of the ellipsoid is 8π.

Learn more about ellipsoid

brainly.com/question/29853961

#SPJ11

It would take approximately 28 hours for the lava to reach the sea. This is calculated by dividing the distance of 14 kilometers by the speed of 0.5 kilometers per hour, which gives a total time of 28 hours.

However, it's important to note that the actual time it takes for lava to reach the sea can vary depending on a number of factors, such as the viscosity of the lava and the topography of the area it is flowing through. Additionally, it's worth remembering that volcanic eruptions can be incredibly unpredictable and dangerous, and it's important to follow all warnings and evacuation orders issued by authorities in the event of an eruption.

Learn more about volcanic eruptions here:

https://brainly.com/question/30028532

#SPJ11

Using the given table, we can evaluate the expressions involving the functions f(x) and g(x). The results are as follows: (a) f(g(1)) = 3, (b) g(f(1)) = 5, (c) f(f(1)) = 4, (d) g(g(1)) = 3, (e) (g ∘ f)(3) = 4, and (f) (f ∘ g)(6) = 1.

To evaluate these expressions, we need to substitute the values from the table into the respective functions. Let's go through each expression step by step:

(a) f(g(1)): First, we find g(1) which equals 4. Then, we substitute this result into f(x), giving us f(4) = 3.

(b) g(f(1)): We start by evaluating f(1) which equals 1. Substituting this into g(x), we get g(1) = 4.

(c) f(f(1)): Here, we evaluate f(1) which is 1. Plugging this back into f(x), we have f(1) = 1, resulting in f(f(1)) = f(1) = 4.

(d) g(g(1)): We begin by calculating g(1) which is 4. Then, we substitute this value into g(x), giving us g(4) = 3.

(e) (g ∘ f)(3): We evaluate f(3) which equals 3. Substituting this into g(x), we get g(3) = 2. Therefore, (g ∘ f)(3) = g(f(3)) = g(3) = 4.

(f) (f ∘ g)(6): We first calculate g(6) which equals 3. Substituting this into f(x), we find f(3) = 3. Hence, (f ∘ g)(6) = f(g(6)) = f(3) = 1.

In summary, (a) f(g(1)) = 3, (b) g(f(1)) = 5, (c) f(f(1)) = 4, (d) g(g(1)) = 3, (e) (g ∘ f)(3) = 4, and (f) (f ∘ g)(6) = 1.

To learn more about functions click here, brainly.com/question/31062578

#SPJ11

The value of x from a random sample of size 9 is approximately 7.345 years.

To find the value of x to the right of which 15% of the means computed from a random sample of size 9 would fall, we need to consider the sampling distribution of the sample means.

For a normal distribution, the sampling distribution of the sample means will also follow a normal distribution.

The mean of the sampling distribution will be the same as the population mean, which is 7 years in this case.

The standard deviation of the sampling distribution, also known as the standard error, can be calculated by dividing the population standard deviation by the square root of the sample size.

Standard error = σ / [tex]\sqrt(n)[/tex]

Given that the population standard deviation is 1 year and the sample size is 9, we can calculate the standard error:

Standard error = 1 / [tex]\sqrt(9)[/tex] = 1/3

Since the distribution is symmetric, we can find the value of x to the right of which 15% of the means fall by finding the z-score corresponding to the 85th percentile (100% - 15% = 85%).

Using a standard normal distribution table or statistical software, we can find that the z-score corresponding to the 85th percentile is approximately 1.036.

Now, we can calculate the value of x:

x = μ + z * SE

where μ is the population mean (7 years), z is the z-score (1.036), and SE is the standard error (1/3).

x = 7 + 1.036 * (1/3) = 7 + 0.345 = 7.345

Therefore, the value of x to the right of which 15% of the means computed from a random sample of size 9 would fall is approximately 7.345 years.

Learn more about sampling distribution

brainly.com/question/31465269

#SPJ11

If a system of n linear equations in n unknowns has infinitely many solutions, it means that the equations are linearly dependent and do not form a unique solution.

In other words, one or more equations can be expressed as linear combinations of the other equations. This implies that the rank of the matrix of coefficients is less than n, as some columns are linearly dependent on others. Since the rank of a matrix is the maximum number of linearly independent rows or columns, the rank of the matrix must be n-1 in this case. Therefore, if a system of n linear equations in n unknowns has infinitely many solutions, its coefficient matrix has rank n-1.

Learn more about matrix here:

https://brainly.com/question/31017647

#SPJ11

Bearing is degrees from north, so we have a triangle ABC where AB=50m is 90-25=65 degrees to the horizontal, A being the starting point. BC=200m is horizontal. AC is the distance we need to find.

Angle ABC is 90+25=115 degrees so we can use the cosine rule to find AC.

AC^2=AB^2+BC^2-2AB.BCcos115=2500+40000+20000cos65=50952.365 approx.

AC=√50952.365=225.73m approx.

Green Sage Pet Groomers washes small dogs at a faster rate.

Use the concept of rate to compare the two groomers.

The rate of Cedar Mountain Pet Groomers is:

2 small dogs per 15 minutes

The rate of Green Sage Pet Groomers is:

3 small dogs per 20 minutes

To compare the rates, we can simplify the rates to have a common denominator of 60 (which represents 1 hour):

Cedar Mountain Pet Groomers: 2/15 x 60 = 8 dogs per hour

Green Sage Pet Groomers: 3/20 x 60 = 9 dogs per hour

Therefore, Green Sage Pet Groomers washes small dogs at a faster rate.

To know more about the rate of change follow

https://brainly.com/question/10712333

#SPJ1

The wavelength of the emitted X-ray photon is approximately 0.0255 nanometers.

To start, we can use the conservation of energy to find the energy of the emitted X-ray photon.

The initial kinetic energy of the electron is converted to the energy of the photon and the final kinetic energy of the electron after it decelerates. We can use the following equation to represent this:

[tex]1/2 \times m \times v1^2 = h \times f + 1/2 \times m \times v2^2[/tex]

Where:

m is the mass of the electron

v1 is the initial velocity of the electron

v2 is the final velocity of the electron

h is Planck's constant

f is the frequency of the X-ray photon

We can rearrange this equation to solve for the frequency of the photon:

[tex]f = (1/2 \times m \times (v1^2 - v2^2)) / h[/tex]

Now, we can use the formula relating frequency and wavelength for electromagnetic radiation:

[tex]c = f \times \lambda[/tex]

Where c is the speed of light.

We can rearrange this equation to solve for the wavelength of the photon:

λ = c / f

Combining these two equations, we get:

[tex]\lambda = c \times h / (1/2 \times m \times (v1^2 - v2^2))[/tex]

Substituting the given values, we get:

[tex]\lambda = (3.00 \times 10^8 m/s) \times (6.63 \times 10^-34 J\timess) / (1/2 \times 9.11 \times 10^-31 kg \times ((5.80 \times 10^6 m/s)^2 - (2/3 * 5.80 \times 10^6 m/s)^2))[/tex]

Simplifying, we get:

λ = 0.0255 nm.

For similar question on wavelength.

https://brainly.com/question/10728818

#SPJ11

We can use the conservation of energy and momentum to solve this problem. The energy of the initial electron is given by its kinetic energy, which can be calculated as:

Ei = (1/2) * me * vi^2

where me is the mass of the electron and vi is its initial velocity. The energy of the emitted photon can be calculated using the formula:

Ef = hc/λ

where h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon. Since the electron loses energy in the process, we have:

Ei = Ef + Ed

where Ed is the energy lost by the electron. The momentum of the electron before and after the collision must also be conserved, which gives:

me * vi = me * vf + hf/λ

where vf is the final velocity of the electron, and hf/λ is the momentum of the emitted photon.

Using the given values, we can substitute the electron's initial and final velocities into the above equation and solve for hf/λ:

hf/λ = me * (vi - vf)

Substituting Ed = (1/2) * me * (vi^2 - vf^2) into the energy conservation equation and solving for Ef, we get:

Ef = Ei - Ed = (1/2) * me * (vi^2 - vf^2)

Substituting the values of the electron's initial and final velocities, we get:

Ef = (1/2) * (9.1094 x 10^-31 kg) * [(5.80 x 10^6 m/s)^2 - (5.80 x 10^6 m/s * (2/3))^2]

Ef ≈ 2.018 x 10^-15 J

Substituting the given values of h and c, and the calculated value of Ef into the equation for hf/λ, we get:

hf/λ = (9.1094 x 10^-31 kg) * [(5.80 x 10^6 m/s) - (5.80 x 10^6 m/s * (2/3))]

hf/λ ≈ 3.698 x 10^-23 kg m/s

λ = h/(hf/λ) ≈ 1.696 x 10^-10 m

Therefore, the wavelength of the emitted photon is approximately 1.696 x 10^-10 meters.

Learn more about electron here:  brainly.com/question/31961231

#SPJ11

a. The point where the tangent is horizontal is (-7, -32).

b. The points where the tangent is vertical are (5, -16) and (5, 16).

To find the points on the curve where the tangent is horizontal, we need to find where the derivative dy/dx equals zero.

First, we need to find dx/dt and dy/dt using the chain rule:

dx/dt = -2t

dy/dt = 3t² - 12

Then, we can find dy/dx:

dy/dx = dy/dt ÷ dx/dt = (3t² - 12) ÷ (-2t) = -(3/2)t + 6

To find where dy/dx equals zero, we set -(3/2)t + 6 = 0 and solve for t:

-(3/2)t + 6 = 0

-(3/2)t = -6

t = 4

Now that we have the value of t, we can find the corresponding value of x and y:

x = 9 - t²= -7

y = t³ - 12t = -32

So the point where the tangent is horizontal is (-7, -32).

To find the points on the curve where the tangent is vertical, we need to find where the derivative dx/dy equals zero.

First, we need to find dx/dt and dy/dt using the chain rule:

dx/dt = -2t

dy/dt = 3t² - 12

Then, we can find dx/dy:

dx/dy = dx/dt ÷ dy/dt = (-2t) ÷ (3t² - 12)

To find where dx/dy equals zero, we set the denominator equal to zero and solve for t:

3t² - 12 = 0

t² = 4

t = ±2

Now that we have the values of t, we can find the corresponding values of x and y:

When t = 2:

x = 9 - t² = 5

y = t³ - 12t = -16

When t = -2:

x = 9 - t² = 5

y = t³ - 12t = 16

So the points where the tangent is vertical are (5, -16) and (5, 16).

Learn more about tangent

brainly.com/question/19064965

#SPJ11

Using inverse square law, the time when the current is doubled and the intensity remains constant is 25ms

To find the new time (in milliseconds) if the current is doubled and the intensity remains constant, we can use the concept of the Inverse Square Law in radiography.

According to the Inverse Square Law, the intensity of radiation is inversely proportional to the square of the distance or directly proportional to the square of the current. Therefore, if the current is doubled, the intensity will be quadrupled.

Given that the initial intensity is 300 mR (milliroentgens) and the current is doubled, the new intensity will be:

New Intensity = 4 * Initial Intensity = 4 * 300 mR = 1200 mR

Now, we need to find the new time required to produce this new intensity while keeping the intensity constant. Since the intensity is directly proportional to the square of the current, we can set up the following equation:

(New Current / Initial Current)² = (Initial Time / New Time)

Squaring both sides:

(2 / 1)² = (100 ms / New Time)

4 = 100 ms / New Time

Cross-multiplying:

4 * New Time = 100 ms

New Time = 100 ms / 4

New Time = 25 ms

Therefore, if the current is doubled and the intensity remains constant, the new time required would be 25 milliseconds.

Learn more on inverse square law here;

https://brainly.com/question/12017808

#SPJ4

The answer is 0.378.

The sample proportion p is equal to the number of individuals in the category of interest divided by the sample size.

p = 37/98 = 0.3776

Rounded to three decimal places, p ≈ 0.378.

Therefore, the answer is 0.378.

To know more about proportion refer here:

https://brainly.com/question/31548894

#SPJ11