Write the electron configuration for:

Cs+

Mg2+

Te2-

Cl-


(Express your answer as a series of orbitals, in order of increasing orbital energy. For example, the electron configuration of Li would be entered as 1s22s1 or [He]2s1.)

Answers

Answer 1

The electron configuration of Cs⁺ is [Xe].

The electron configuration of Mg²⁺ is [Ne].

The electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.

The electron configuration of Cl⁻ is [Ne]3s²3p⁶.

What is the electron configuration of the ions?

Cs⁺: The Cs⁺ ion has lost one electron from the neutral Cs atom, which has an electron configuration of [Xe]6s¹. Therefore, the electron configuration of Cs⁺ is [Xe].

Mg²⁺: The Mg²⁺ ion has lost two electrons from the neutral Mg atom, which has an electron configuration of [Ne]3s². Therefore, the electron configuration of Mg²⁺ is [Ne].

Te²⁻: The Te²⁻ ion has gained two electrons compared to the neutral Te atom, which has an electron configuration of [Kr]5s²4d¹⁰5p⁴. Therefore, the electron configuration of Te²⁻ is [Kr]5s²4d¹⁰5p⁶.

Cl⁻: The Cl⁻ ion has gained one electron compared to the neutral Cl atom, which has an electron configuration of [Ne]3s²3p⁵. Therefore, the electron configuration of Cl⁻ is [Ne]3s²3p⁶.

Learn more about electron configuration here: https://brainly.com/question/11316046

#SPJ1


Related Questions


What is a vapor?
A. A substance that is in the gas phase at a temperature at which it
would normally be a solid or liquid
B. A substance that has a much higher melting point and boiling point than other similar substances
C. A substance that forms a gas, but only at very high temperatures
D. A substance that is always in the solid or liquid phase at room
temperature

Answers

Answer:

C

Explanation:

PHYSICS

a gaseous substance that is below its critical temperature, and can therefore be liquefied by pressure alone.

C. Substance that forms, the gas, but only at very high temperatures.

How can we use liquid nitrogen? What are the purposes of using liquid nitrogen?​

Answers

Answer:

Liquid nitrogen can be used to freeze biological tissue. Liquid nitrogen is -210°C which will stop all biological decomposition in the tissue and preserve it.

Explanation:

Answer:Liquid nitrogen is a very cold and versatile chemical which has numerous uses in applications such as cooling, cryogenics, material preservation, and other industrial processes. Its incredibly low temperature (-196 degrees Celsius/-320 degrees Fahrenheit) makes it an excellent coolant and refrigerant for various materials. These uses can range from food preservation to semiconductor production. It is also used as a cryogenic in medical procedures such as cryosurgery and as a propellant in rocket fuel.

Identify the expected color of each element in a model of a molecule. Carbon Choose... Hydrogen Choose... Nitrogen Choose... Oxygen Choose... Identify the expected color of each element in a model of a molecule. Carbor Choose... White Hydrog Gray Red Nitroge Blue Black Oxygen choose...

Answers

Carbon - Black

Hydrogen - white

Nitrogen - blue

Oxygen - grey

What is a molecular model?

A molecular model is a representation of the three-dimensional structure of a molecule. It is used to visualize the arrangement of atoms within the molecule and to understand its chemical and physical properties.

There are various types of molecular models, ranging from physical models made of plastic or metal, to computer-generated models used in molecular graphics software. Physical models can be used to represent molecules at a larger scale, while computer-generated models can be used to show detailed structures and interactions between individual atoms.

Learn more about molecular model:https://brainly.com/question/156574

#SPJ1

At standard temperature and a pressure of 613 kPa, a sample of Cl₂ gas has a volume of 39.2 liters. How many grams of gas are in the
sample?

Answers

There are 0.144 grams of Cl₂ gas in the sample if at standard temperature and a pressure of 613 kPa, a sample of Cl₂ gas has a volume of 39.2 liters.

What is gas constant?

The gas constant, denoted by the symbol R, is a physical constant that appears in the ideal gas law equation. The ideal gas law is an equation of state that describes the behavior of an ideal gas in terms of its pressure, volume, temperature, and the number of moles of gas present. The equation is:

PV = nRT

where P is the pressure of the gas, V is its volume, n is the number of moles of gas, T is its absolute temperature, and R is the gas constant.

To determine the number of grams of Cl₂ gas in the sample, we need to use the ideal gas law equation:

PV = nRT

where P denotes pressure, V denotes volume, n denotes the number of moles of gas, R denotes the gas constant, and T denotes temperature in Kelvin.

First, we need to convert the pressure to units of Pa:

613 kPa = 613,000 Pa

Next, we need to convert the volume to units of m³:

39.2 L = 0.0392 m³

The gas constant R is equal to 8.31 J/(mol K), and the temperature is assumed to be standard temperature, which is 273 K.

Now, we can rearrange the ideal gas law equation to solve for n:

n = PV/RT

Substituting the given values, we get:

n = (613,000 Pa)(0.0392 m³)/(8.31 J/(mol K) * 273 K)

Simplifying, we get:

n = 0.00203 mol

Finally, we can use the molar mass of Cl₂, which is 70.9 g/mol, to convert the number of moles to grams:

mass = n * molar mass

mass = 0.00203 mol * 70.9 g/mol

mass = 0.144 g

To know more about gas constant, visit:

https://brainly.com/question/30859506

#SPJ1

The sample of Cl₂ gas has a mass of approximately 0.095 grams.

What is Temperature?

Temperature is a measure of the average kinetic energy of the particles in a substance or system. It determines the direction of heat flow between two objects in contact, with heat flowing from the object with a higher temperature to the one with a lower temperature until they reach thermal equilibrium. The SI unit of temperature is the kelvin (K), which is defined based on the triple point of water, where the temperature is 273.16 K. Other common temperature scales include Celsius and Fahrenheit.

To solve this problem, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the pressure to the correct units. 613 kPa is equal to 6.13 × 10^4 Pa. We also need to convert the volume to cubic meters, since that is the SI unit of volume. 39.2 liters is equal to 0.0392 cubic meters.

Next, we need to rearrange the ideal gas law to solve for n:

n = PV/RT

We can look up the value of R: it is equal to 8.31 J/(mol·K).

Now we can substitute in the values we know:

n = (6.13 × 10^4 Pa)(0.0392 m^3)/(8.31 J/(mol·K) × 298 K)

Simplifying, we get:

n = 0.00134 mol

Finally, we can convert from moles to grams by multiplying by the molar mass of Cl₂. The molar mass of Cl₂ is approximately 70.9 g/mol.

mass = n × molar mass

mass = 0.00134 mol × 70.9 g/mol

mass = 0.095 g

Learn more about Temperature from given link

https://brainly.com/question/26866637

#SPJ1

Find the mass of 2 moles of carbon tetrachloride

Answers

Answer:

The mass of 2 moles of carbon tetrachloride is

307.646 grams

Explanation:

The chemical formula for Carbon tetrachloride is [tex]\ce{CCl_4}[/tex].  It contains 1 carbon atom and 4 chlorine atoms.

Carbon tetrachloride is formed due to the covalent bond between one carbon atom with four chlorine atoms.

In order to find the mass of 2 moles of [tex]\ce{CCl_4}[/tex] we need to determine the molar mass.

The molar mass of carbon is 12.011 g/mol.

The molar mass of chlorine is 35.453 g/mol.

As stated before we have 1 carbon atom and 4 chlorine atoms. So the molar mass can be evaluated by

[tex]\left(1*12.011\right)+\left(35.453*4\right)=153.823[/tex]

The molar mass of [tex]\ce{CCl_4}[/tex] is 153.823 g/mol.

You can multiply that by 2 to get the mass in grams of 2 moles of carbon tetrachloride.

[tex]2*153.823 =307.646[/tex]

Learn more about covalent bonds here

https://brainly.com/question/28808905

WHAT IS THE OXIDATION NUMBER OF SULFUR IN THE S2O8 ION?

Answers

Answer: The Oxidation State Of Sulphur is +6

Explanation:

What is the name in a position called

Answers

The names of the positions are called:

(1) (10) Atomic number

(2) (11) Chemical symbols

(3) (12) Elements

(4) (13) Atomic mass

What is an atomic structure?

Atomic structure refers to the composition and arrangement of subatomic particles within an atom. An atom consists of a central nucleus, which contains positively charged protons and uncharged neutrons, surrounded by negatively charged electrons that move around the nucleus in shells or energy levels.

The number of protons in the nucleus determines the atomic number and thus the identity of the element. The arrangement of electrons around the nucleus determines the chemical and physical properties of the element.

Learn more on atomic structure here: https://brainly.com/question/21289019

#SPJ1

The questions are:

10 What is the name for the number in this position called? (the answer is not "6") →6

11 What is the name for the letter in this position called? (the answer is not "C"!) →C

12 What is the name in this position called? (the answer is not "Carbon"!) →Carbon

13

What is the name for the number in this position? (the answer is not "12.0") →12.0

Use the spaces below to type your answers to the questions above.

2.75g NaCL is present
in 650g of Water. Is the solution saturated or unsaturated?
(Solubility of wäter is 0.33%6)

Answers

Answer:

To determine if the solution is saturated or unsaturated, we need to compare the amount of NaCl in the solution to its solubility in water at the given temperature.

The solubility of NaCl in water at room temperature (25°C) is approximately 36 grams per 100 grams of water, or 0.36 g/g. This means that at 25°C, water can dissolve up to 0.36 grams of NaCl per gram of water.

In this case, we have 2.75 grams of NaCl dissolved in 650 grams of water. To find the concentration of NaCl in the solution, we divide the mass of NaCl by the total mass of the solution:

concentration of NaCl = mass of NaCl / total mass of solution

concentration of NaCl = 2.75 g / (2.75 g + 650 g)

concentration of NaCl = 0.0042 g/g

Comparing the concentration of NaCl in the solution to its solubility in water at 25°C, we see that:

0.0042 g/g < 0.36 g/g

Since the concentration of NaCl in the solution is less than its solubility in water, the solution is unsaturated.

Explanation:

2. Assume
60.0 mL
of a
2.5M
potassium chromate solution is mixed with
40.0 mL
of a
3.2M
solution of iron (III) chloride. a) Will a reaction occur and if so, what reaction will occur? b) How much precipitate will be produced in grams? c) What is the concentration of each spectator ion in the final solution? What is the concentration of left-over ions in the solution? (Calculate the final concentration of each ion).
Previous qu

Answers

The displacement reaction will occur. The concentration of each spectator ion in the final solution is 3/2 moles of Fe2(CrO4)3 will be formed and Concentration of CrO4^2- will be  0.033 M

Step 1:

The balanced chemical equation for the reaction is given below:

K2CrO4 + FeCl3 -> Fe2(CrO4)3 + 2KCl

Hence, the reaction occurs between potassium chromate and iron (III) chloride.

Step 2:

We need to find out how much precipitate will be produced in grams.

Let's calculate the moles of reactants and then use mole ratio to find out the limiting reagent:

[tex]\[\text{Moles of potassium chromate} = \text{Molarity} \times \text{Volume} \div 1000\][Molarity of K2CrO4 = 2.5 M; Volume of K2CrO4 = 60.0 mL][/tex]

Moles of K2CrO4 = (2.5 x 60.0) / 1000 = 0.150 mol

[tex]\[\text{Moles of iron (III) chloride} = \text{Molarity} \times \text{Volume} \div 1000\][Molarity of FeCl3 = 3.2 M[/tex] = 3.2 M;

Volume of FeCl3 = 40.0 mL]Moles of FeCl3 = (3.2 x 40.0) / 1000 = 0.128 mol

As we see, K2CrO4 is the limiting reagent. So, FeCl3 is in excess.

Therefore, amount of Fe2(CrO4)3 precipitated is given by moles of K2CrO4 and mole ratio:

[tex]\[\text{Moles of Fe2(CrO4)3} = \text{Moles of K2CrO4} = 0.150 mol\][/tex]

Now, we will find the molecular weight of Fe2(CrO4)3 as 479.87 g/mol.

[tex]\[\text{Mass of Fe2(CrO4)3} = \text{Moles of Fe2(CrO4)3} \times \text{Molecular weight}\][/tex]

[tex]\[\text{Mass of Fe2(CrO4)3} = 0.150 \times 479.87 = 71.98\][/tex]

Therefore, the amount of precipitate produced is 71.98 g.c

We need to find out the concentration of each spectator ion in the final solution.

Firstly, we can write down the ionic equation for the reaction:

[tex]2 K+ + CrO4^2- + 3 Fe^3+ + 3 Cl^- - > 2 K+ + 3 Cl^- + Fe2(CrO4)3[/tex]

Now, we will check which ions remain in the final solution. We see that potassium and chloride ions are spectator ions. Hence, we don't need to calculate their concentration. The concentration of remaining ions can be calculated as follows:Fe3+ ions: In the given reaction, 3 moles of FeCl3 reacts with 2 moles of K2CrO4.

Hence, 3/2 moles of Fe2(CrO4)3 will be formed.

Therefore,

= [tex]\frac{3/2 \times 3.2 \times 40.0 \div 1000}{60.0 + 40.0}[/tex]

= 0.034 M\]CrO42- ions:

In the given reaction, 2 moles of K2CrO4 reacts with 3 moles of FeCl3.

Hence, 2/3 moles of Fe2(CrO4)3 will be formed.

Therefore,

Concentration{ of CrO4^2-}

= [tex]\frac{2/3 \times 2.5 \times 60.0 \div 1000}{60.0 + 40.0}[/tex]

= 0.033 M\]

For more such questions on displacement reaction , Visit:

https://brainly.com/question/20690229

#SPJ11

given the atomic mass of hydrogen is 1 amu, the atomic mass of oxygen is 16 amu, and one molecule of sulfuric acid has a mass of 98 amu, what is the atomic mass of sulfur trioxide?

Answers

The atomic mass of sulfur trioxide (SO3) is 82 amu.

How to find the atomic mass of sulfur trioxide ?

Sulfur trioxide (SO3) has one sulfur atom and three oxygen atoms.

The atomic mass of sulfur can be calculated by subtracting the total mass of the oxygen atoms in sulfuric acid (3 x 16 amu) from the mass of sulfuric acid (98 amu) and then subtracting the mass of the remaining oxygen atom:

Mass of sulfur = (98 amu - 3 x 16 amu) - 1 x 16 amuMass of sulfur = (98 amu - 48 amu) - 16 amuMass of sulfur = 34 amu

The atomic mass of sulfur is 34 amu.

To find the atomic mass of sulfur trioxide, we add the atomic masses of one sulfur atom and three oxygen atoms:

Atomic mass of SO3 = 1 x 34 amu + 3 x 16 amuAtomic mass of SO3 = 34 amu + 48 amuAtomic mass of SO3 = 82 amu

Therefore, the atomic mass of sulfur trioxide (SO3) is 82 amu.

Learn more about sulfur trioxide here : brainly.com/question/1458186

#SPJ1

The acid dissociation Ka of benzoic acid (CHCO2H) is 6.3 x 10 Calculate the pH of a 1.3 × 10- M aqueous solution of benzoic acid. Round your answer to 2 decimal places.

Answers

The pH of the 1.3 x 10-4 M aqueous solution of benzoic acid is 4.20, rounded to two decimal places.

The pH of a 1.3 x 10- M aqueous solution of benzoic acid can be calculated using the acid dissociation constant (Ka) of the benzoic acid. The Ka of benzoic acid is 6.3 x 10-5.
First, we need to calculate the concentration of the benzoic acid (CHCO2H) in the solution. This can be done by multiplying the initial molarity of 1.3 x 10-4 with the volume of the solution. The concentration of benzoic acid in the solution is therefore 1.3 x 10-4 M.
Next, we need to use the Henderson-Hasselbalch equation to calculate the pH of the solution. The Henderson-Hasselbalch equation is: pH = pKa + log([A-]/[HA]).
In this equation, pKa is the acid dissociation constant of the benzoic acid, [A-] is the concentration of the conjugate base (CHCO2-) in the solution and [HA] is the concentration of the benzoic acid in the solution.
Substituting the values in the Henderson-Hasselbalch equation, we get:
pH = -log(6.3 x 10-5) + log(1.3 x 10-4/1.3 x 10-4)
pH = -log(6.3 x 10-5)
pH = 4.20
For more such questions on benzoic acid

https://brainly.com/question/8567447

#SPJ11

For Mn3+, write an equation that shows how the cation acts as an acid. express your answer as a chemical equation including phases.

Answers

Mn3+, an ion of manganese(III), can function as an acid by giving a proton (H+) to a base. Here's an illustration: Mn3+ (aq) + 3OH- (aq) Mn(OH)3 (s)

What colour are Mn2+ and MnO4?

There is no need to add an indicator because MnO4's vivid purple colour serves as one enough. In the conical flask, there is Fe2+. The Fe2+ solution is added, and the Fe2+ lowers the MnO4- to Mn2+. As Mn2+ is a colourless solution, the purple colour disappears.

What is the ion Mn2name? +'s

The divalent metal cation manganese(2+) contains manganese as the metal. It plays the part of a cofactor. It consists of a monoatomic dication, a manganese cation, and a divalent metal cation.

To know more about cation visit:-

https://brainly.com/question/28710898

#SPJ1

Think of ten animals, and create a diagram showing which animals they might have evolved from and which animals they might be similar to. Put those animals into at least 3 groups.

Answers

This is just one possible way to group and diagram the evolutionary relationships between these animals.

What is evolution?

Evolution is the process of change in the inherited characteristics of biological populations over successive generations. Evolutionary changes occur through a variety of mechanisms, including natural selection, genetic drift, gene flow, and mutations. Over time, these changes can result in the emergence of new species or the extinction of existing ones. Evolutionary theory provides an explanation for the diversity of life on Earth and has been supported by a vast amount of scientific evidence from multiple disciplines, including genetics, paleontology, and comparative anatomy. The theory of evolution by natural selection, developed by Charles Darwin and Alfred Russel Wallace in the mid-19th century, remains the fundamental concept in evolutionary biology.

Here is a diagram showing the possible evolutionary relationships between ten animals, along with their similarities:

Group 1: Mammals

Humans: Evolved from primates, similar to apes and monkeys

Elephants: Evolved from proboscideans, similar to mammoths and mastodons

Dolphins: Evolved from land mammals, similar to whales and porpoises

Group 2: Birds

Eagles: Evolved from theropod dinosaurs, similar to hawks and falcons

Penguins: Evolved from non-avian dinosaurs, similar to auks and puffins

Group 3: Reptiles and Amphibians

Crocodiles: Evolved from archosaurs, similar to alligators and caimans

Snakes: Evolved from lizards, similar to boas and pythons

Frogs: Evolved from fish, similar to toads and salamanders

Group 4: Insects

Bees: Evolved from wasps, similar to bumblebees and hornets

Butterflies: Evolved from moths, similar to skippers and hair streaks

Note: This is just one possible way to group and diagram the evolutionary relationships between these animals. There are many different ways to classify and categorize animals based on their evolutionary history and characteristics.

To know more about animals visit:-

https://brainly.com/question/25897306

#SPJ1

When two hydrogen atoms Combine to form a molecule the two nuclei can Spin in The Same or opposite direction his phenomena is known as ?​

Answers

Answer: Hund's Rule

Explanation: The phenomenon is hund's rule of multiplicity.

consider this segment of polypeptide compound found in wasp venom. identify the amide bonds in this compound.

Answers

The polypeptide compound found in wasp venom have the amide bonds  known as peptide bond between O and NH.

What are polypeptides?

A polypeptide is a continuous, unbranched chain of amino acids linked by peptide bonds. To create an amide, a peptide bond connects the carboxyl group of one amino acid to the amine group of the next amino acid. Proteins play an important role in biology, serving as the building blocks of muscles, bones, hair and nails, building enzymes, antibodies, muscles, connective tissue, and much more. Peptides are shorter chains of amino acids. They differ from polypeptides in that they are composed.

When 10 or more α-amino acids are linked by peptide bonds (-CONH-), the resulting polyamide is called a polypeptide. This bond is formed by a condensation reaction between the carboxylic acid group of one amino acid and the amine group of another, resulting in the desired amide bond and the loss of a water molecule.  

To know more about carboxylic acid group, visit:

https://brainly.com/question/12603276

#SPJ1

the denaturing of proteins occurs when the stabilizing forces are altered. below is the set of processes in which proteins are denatured.

Answers

The correct answer is bleaching of hair with hydrogen peroxide, curdling of milk by rennin and straightening frizzy hair by conditioner.

What is protein denaturation?

Protein denaturation is the process by which a protein loses its shape and function due to exposure to certain environmental conditions such as heat, pH, pressure, or chemical agents. The denaturation process can cause the protein's structure to unravel, leading to the loss of its biological activity. This happens because the protein's three-dimensional structure is crucial to its function, and when the structure is altered, the protein may no longer be able to perform its intended function.

Protein denaturation can occur reversibly or irreversibly depending on the extent of the damage to the protein's structure. Reversible denaturation occurs when the protein regains its structure and function once the environmental stressor is removed, while irreversible denaturation occurs when the damage is permanent and the protein cannot regain its function.

To know more about protein denaturation, visit:

https://brainly.com/question/19756195

#SPJ1

The full question is:

The denaturing of proteins occurs when the stabilizing forces are altered. Below is the set of processes in which proteins are denatured. Write the chemicals necessary for the denaturation to occur

1. Bleaching of hair

2. Curdling of milk

3. Straightening frizzy hair

Consider the reaction, CH4 (g) +202 (g) → CO₂ (g) + 2H₂O (1), AH= −890 kJ.
What will be the change in enthalpy when 3 moles of methane react in excess oxygen?
O-890 kJ
○ -2.67 × 10³ kJ
O +890 kJ
O +2.67 x 10³ kJ

Answers

The change in enthalpy when 3 moles of methane react in excess oxygen is -2.67 × 10³ kJ (Option B).

What is enthalpy?

Enthalpy (H) is a thermodynamic property that describes the total heat content of a system at a constant pressure. It is a measure of the energy that is transferred as heat during a chemical reaction or physical change at constant pressure.

Enthalpy is defined mathematically as:

H = U + PV

where U is the internal energy of the system, P is the pressure, and V is the volume. Enthalpy is often measured in units of Joules (J) or kilojoules (kJ).

The given reaction is:

CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l) ΔH = -890 kJ

This equation shows that when one mole of methane reacts with two moles of oxygen, it produces one mole of carbon dioxide and two moles of water while releasing 890 kJ of energy.

To determine the change in enthalpy when 3 moles of methane react in excess oxygen, we need to first calculate the amount of heat released when one mole of methane reacts with excess oxygen.

From the balanced chemical equation, we can see that 1 mole of CH4 releases 890 kJ of energy, so the energy released by 3 moles of CH4 would be 3 times that value:

Energy released by 3 moles of CH4 = 3 × (-890 kJ/mol) = -2670 kJ

To know more about internal energy, visit:

https://brainly.com/question/14668303

#SPJ1

The change in enthalpy when 3 moles of methane react in excess oxygen is -2670 kJ.

What is Enthalpy?

Enthalpy is a thermodynamic property of a system that describes the heat content of the system at constant pressure. It is denoted by the symbol "H" and is expressed in units of joules (J) or kilojoules (kJ). Enthalpy is a state function, which means that it depends only on the initial and final states of the system, not on the path taken to reach those states.

The given reaction is: CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), ΔH = −890 kJ

This reaction is for one mole of methane. To find the change in enthalpy when 3 moles of methane react, we need to multiply the enthalpy change by 3:

ΔH = 3 × (-890 kJ/mol) = -2670 kJ

Therefore, the change in enthalpy when 3 moles of methane react in excess oxygen is -2670 kJ.

Learn more about Enthalpy from given link

https://brainly.com/question/14047927

#SPJ1

What statement is true about the elements present in a compound

Answers

Answer:

A compound is a material formed by chemically bonding two or more chemical elements. The type of bond keeping elements in a compound together may vary: covalent bonds and ionic bonds are two common types. The elements are always present in fixed ratios in any compound.

Explanation:

Suppose that the C=O group in a peptide bond can be regarded as isolated from the rest of the molecule. Given that the force constant of the bond in a carbonyl group is 908 N m−1 , calculate the vibrational frequency of (a) 12C=16O and (b) 13C=16O.

I have the answers. I am bit confused of how the units come about. Please help

Answers

a.

The vibrational frequency of the C=O bond in 12C=16O is approximately 1.78 s−1.

b.

The vibrational frequency of the C=O bond in 13C=16O is approximately 1.87 s−1.

How do we calculate?

The vibrational frequency of a bond can be calculated as:

v = 1/2π x √(k/μ)

where μ = m1 x m2 / (m1 + m2)

(a) For 12C=16O:

The mass of ^12C is 12 atomic mass units (amu), and the mass of ^16O is 16 amu.

μ = 12 x 16 / (12 + 16)

μ = 7.2 amu

v = 1/2π x √(908 N m−1 / 7.2 amu)

v = 1/2π x √(126.11 N m−1 amu−1)

v = 1/2π x 11.22 s−1

v ≈ 1.78 s−1

hence the vibrational frequency of the C=O bond in 12C=16O is approximately 1.78 s−1.

(b) For 13C=16O:

The mass of ^13C is 13 amu, and the mass of ^16O is 16 amu.

μ = 13 x 16 / (13 + 16)

μ = 6.6 amu

v = 1/2π x √(908 N m−1 / 6.6 amu)

v = 1/2π x √(137.58 N m−1 amu−1)

v = 1/2π x 11.74 s−1

v ≈ 1.87 s−1

Hence, the vibrational frequency of the C=O bond in 13C=16O is approximately 1.87 s−1.

Learn more about vibrational frequency at: https://brainly.com/question/27816476

#SPJ1

whereas the Early transition metal ions are generally quite oxophilic Lewis ligands they coordinate are Lewis A) acids; acids B) bases; bases C) bases; acids D) acids; bases

Answers

whereas the Early transition metal ions are generally quite oxophilic Lewis ligands they coordinate are Lewis A) acids; acids

In transition metal complexes, do ligands behave as Lewis acids?

When ligands make coordinate bonds with transition metal ions, they form a complex; the transition metal ion functions as a Lewis acid, while the ligand acts as a Lewis base.

Ligands are Lewis bases, which means they have at least one pair of electrons to provide to a metal atom/ion. Ligands are also referred to as complexing agents. Metal atoms/ions are Lewis acids, which means they may take electron pairs from Lewis bases.

According to the Lewis acid-base principle, the electron pair acceptor is known as the Lewis acid. Transition metals are electron-deficient in general and take electrons from ligands.

learn more about Transition metals

https://brainly.com/question/2879928

#SPJ1

Consider a 0.238 M aqueous solution of sodium hydroxide, NaOH.

How many grams of NaOH are dissolved in 23.46 mL?

Answers

Answer:

0.2237 grams of NaOH

Explanation:

To calculate the grams of NaOH dissolved in 23.46 mL of a 0.238 M solution of NaOH, we can use the formula:

mass = molarity x volume x molar mass

where mass is the mass of NaOH dissolved in grams, molarity is the concentration of NaOH in moles per liter, volume is the volume of the solution in liters, and molar mass is the molar mass of NaOH in grams per mole.

First, we need to convert the volume of the solution from milliliters to liters:

volume = 23.46 mL / 1000 mL/L

volume = 0.02346 L

The molar mass of NaOH is 40.00 g/mol.

Now we can plug in the values and solve for mass:

mass = 0.238 M x 0.02346 L x 40.00 g/mol

mass = 0.2237 g

Therefore, there are 0.2237 grams of NaOH dissolved in 23.46 mL of a 0.238 M solution of NaOH.

FILL IN THE BLANK. Use the Gizmo to find the freezing, melting, and boiling points of water at 5,000 meters (16,404 feet). Write these values below. Freezing point: _______ Melting point: _______ Boiling point: _______

Answers

If we use the Gizmo to find the freezing, melting, and boiling points of water at 5,000 meters (16,404 feet) then,

Freezing point: 32 ºF (0ºC)

Melting point: 32 ºF (0ºC)

Boiling point: 203°F (95°C)

The freezing point is defined as the temperature at which a liquid becomes a solid. Increased pressure usually raises the freezing point with the melting point of the solid. The boiling point of a pure substance is defined as the temperature at which the substance transitions from a liquid to the gaseous phase. At the boiling point the vapor pressure of the liquid is equal to the applied pressure on the liquid. The melting point of a substance is defined as the temperature at which the substance changes from a solid to a liquid.

Melting occurs at a single temperature for the pure substances. The normal and average melting point and boiling point of water at 1 atmospheric pressure are 0°C and 100°C respectively. Decreasing the pressure under 1 atm. will lower the boiling point since the external pressure will be lower so it will become equal with the vapor pressure at a lower temperature.

To learn more about Freezing point

https://brainly.com/question/40140

#SPJ4

The enthalpy of vaporization for dimethyl ether is 27.5 kJ/mol. Dimethyl ether has a vapor pressure of 760 torr at 34.6 oC. Using the Clausius-Clapeyron equation, what is the vapor pressure for methanol at 4.2 oC? Give your answer in torr, to the first decimal point.

Answers

The vapor pressure of methanol at 4.2 oC is approximately 1.6 torr.

What is the vapor pressure of methanol?

The Clausius-Clapeyron equation relates the vapor pressure of a substance at two different temperatures and its enthalpy of vaporization. The equation is:

ln(P2/P1) = (-ΔHvap/R)(1/T2 - 1/T1)

where;

P1 and T1 are the vapor pressure and temperature at the first state, P2 and T2 are the vapor pressure and temperature at the second state, ΔHvap is the enthalpy of vaporization, R is the gas constant, and ln is the natural logarithm.

We are given the enthalpy of vaporization for dimethyl ether, which is 27.5 kJ/mol. We are also given the vapor pressure of dimethyl ether at 34.6 ⁰C, which is 760 torr.

We want to find the vapor pressure of methanol at 4.2 ⁰C.

Let's choose the vapor pressure of dimethyl ether at 34.6 ⁰C as the first state, and the vapor pressure of methanol at 4.2 ⁰C as the second state. We can convert the temperatures to kelvin by adding 273.15:

T1 = 34.6 + 273.15 = 307.75 K

T2 = 4.2 + 273.15 = 277.35 K

We can plug in the values into the Clausius-Clapeyron equation:

ln(P2/760) = (-27.5×10^3 J/mol)/(8.314 J/(mol·K)) × (1/277.35 K - 1/307.75 K)

Simplifying:

ln(P2/760) = -5.721

Taking the exponential of both sides:

P2/760 = e^-5.721

Multiplying both sides by 760:

P2 = 1.65 torr (to the nearest tenth)

Learn more about vapor pressure here: https://brainly.com/question/4463307

#SPJ1

when nacl (table salt) forms, sodium (na) loses energy by ____ and chlorine (cl) gains energy by ____.

Answers

When NaCl (table salt) forms, sodium (Na) loses energy by transferring one electron to chlorine (Cl), and chlorine gains energy by accepting the electron from sodium.

Sodium and chlorine have different electron configurations, with sodium having a single electron in its outermost shell and chlorine having seven electrons in its outermost shell. Sodium has a tendency to lose this single electron to attain a stable noble gas configuration (like neon), whereas chlorine has a tendency to gain one electron to attain a stable noble gas configuration (like argon).

When sodium and chlorine come into contact, the electronegativity difference between the two atoms results in the transfer of an electron from sodium to chlorine, resulting in the formation of an ionic bond and the compound NaCl.

During this process, sodium loses energy by ionization, which is the process of removing an electron from an atom or ion, and chlorine gains energy by electron affinity, which is the energy released when an electron is added to an atom or ion. This transfer of energy leads to the formation of a stable compound and the release of heat.

To learn more about sodium

https://brainly.com/question/29327783

#SPJ4

Can someone help me with this chemistry question? Will give brainliest for a solution + explanation.

Answers

The percentage yield for the in which 1.94 g of Sb₂S₃ is obtained from 1.72 g of antimony and slight excess sulphur is 80% (3rd option)

How do i determine the percentage yield?

First, we shall obtain the theoretical yield of Sb₂S₃. Details below

2Sb(s) + 3S(s) → Sb₂S₃(s)

Molar mass of Sb = 121.76 g/molMass of Sb from the balanced equation = 2 × 121.76 = 243.52 gMolar mass of Sb₂S₃ = 339.7 g/mol Mass of Sb₂S₃ from the balanced equation = 1 × 339.7 = 339.7 g

From the balanced equation above,

243.52 g of Sb reacted to produce 339.7 g of Sb₂S₃

Therefore,

1.72 g of Sb will react to produce = (1.72 × 339.7) / 243.52 = 2.40 g of Sb₂S₃

Finally, we shall determine the percentage yield for the reaction. Details below:

Actual yield of Sb₂S₃ = 1.94 gTheoretical yield of Sb₂S₃ = 2.40 gPercentage yield =?

Percentage yield = (Actual /Theoretical) × 100

Percentage yield = (1.94 / 2.40) × 100

Percentage yield = 80%

Thus, the percentage yield is 80% (3rd option)

Learn more about stoichiometry:

https://brainly.com/question/29615581

#SPJ1

Q6. Draw a Lewis dot structure for sulfuric acid, H2SO4, in such a way that the octet rule is obeyed for all atoms except H. What is the formal charge on the sulfur atom?

Answers

The Lewis structure of the H2SO4 has been shown in the image attached.

How does the atoms in H2SO4 obey the octet rule?

In H2SO4, there are a total of 32 valence electrons available for bonding. The central atom in H2SO4 is sulfur (S), which has 6 valence electrons. To achieve an octet, sulfur needs to form six covalent bonds.

The two hydrogen atoms (H) in H2SO4 each contribute one valence electron to form a single covalent bond with sulfur. This leaves sulfur with 4 valence electrons.

The four oxygen atoms (O) in H2SO4 each contribute 6 valence electrons to form a total of 24 valence electrons in four covalent bonds with sulfur. This brings the total number of valence electrons around sulfur to 28.

To complete the octet, each oxygen atom also has two lone pairs of electrons, bringing the total number of valence electrons around sulfur to 32.

Learn more about Lewis structures:https://brainly.com/question/20300458

#SPJ1

Look at the picture below

Answers

The claim was correct . All elements  have same number of particles in one mole and have different number of particles  in a mole based on atomic number .

What is mole ?

In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object or sample. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle such as an electron, depending on the substance. For example, despite having different volumes and masses, 10 moles of water (a chemical compound) and 10 moles of mercury (a chemical element) contain equal amounts of substance, and the mercury contains exactly one atom for each molecule of water.

to know more about mole , visit ;

brainly.com/question/26416088

#SPJ1

When considering the relationship between standard free energy change and the equilibrium constant, if K>1, _______. Select the correct answer below: products are more abundant at equilibrium ?G? is positive ?G? is zero reactants are more abundant at equilibrium

Answers

If K>1, products are more plentiful at equilibrium when examining the link between the standard free energy change and the equilibrium constant.

A key idea in chemical equilibrium is the equilibrium constant (K), which reflects the correlation between the reactant and product concentrations at equilibrium. It is described as the ratio of the concentrations of the reactants and products, each raised to the power of their respective stoichiometric coefficients. As well as the equilibrium concentrations of reactants and products, K gives information on the size and direction of a chemical reaction. A higher value of K denotes a greater preference for the product in the reaction, whereas a lower value denotes a greater preference for the reactant. Temperature has an impact on K, which can be used to forecast how shifting conditions would alter an equilibrium chemical system.

Learn more about equilibrium constant here:

https://brainly.com/question/13874144

#SPJ4

Choose the correct answer.

Answers

Titration results in pink colour, due to the addition of an acid-base indicator Phenolphthalein.
Phenolphthalein turns colourless to brilliant pink as the solution turns from acidic to basic.
It turns pink due to the indicator we employ, phenolphthalein.
It becomes pink at a pH threshold because the lack of a hydrogen ion on an ionizable group affects the frequency of light that the solution absorbs and hence the complementary color that it transmits.

What does the Law have to do with burning *
gasoline?

Answers

Airborne pollutants are generated by the vapours released when gasoline evaporated and the materials created when gasoline burns (carbon monoxide, nitrogen dioxide, particulates, and unburned hydrocarbons).

Can you burn gasoline?

Air must be supplied to gasoline in order to burn. To create an ignitable solution, only a small amount of gasoline is needed. If the gas-to-air combination includes such little only 1.4% gasoline by content, it might be burnt with explosive intensity.

What is gasoline that burns cleanly?

For cleaner burning gasoline, use CBG. In accordance with air quality rules, this moniker refers to particular gasoline formulas that must be supplied in specific regions of Arizona.

To know more about carbon monoxide visit:

https://brainly.com/question/22530423

#SPJ1

Other Questions
Provenzano Corporation manufactures two products: Product B56Z and Product D32N. The company is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products B56Z and D32N.Activity Cost PoolActivity MeasureTotal CostTotal ActivityMachiningMachine-hours$330,00015,000MHsMachine setupsNumber of setups$50,000100setupsProduct designNumber of products$88,0002productsOrder sizeDirect labor-hours$280,00010,000DLHsActivity MeasureProduct B56ZProduct D32NMachine-hours6,0009,000Number of setups8020Number of products11Direct labor-hours6,0004,000What is the activity rate for the Machining activity cost pool?rev: 03_17_2018_QC_CS-119201Multiple Choice$55.00 per MH$36.67 per MH$22.00 per MH$74.80 per MH please help i will give brainliest(you only need to answer two of these) pick any 21. What are business services, and where are they located in central business districts andsuburbs?2. What are consumer services, and where are they located in central business districts andsuburbs?3. How do marketers use geography to determine what services are needed and where they shouldbe located?4. How do services vary between rural settlements and urban settlements?5. How do models of urban development explain the distribution of people, services, and economicactivities in urban structures?6. As urban areas expand, how are patterns of transportation, population distribution, andgovernments changing? Which of these devices are not based on magnetic effect of electric current? (Room heater, Magnetic crane, Electric bell, Loud speaker) a family has decided to go away for the summer. the monthly mortgage payment on the family's house is $1,000. water, electricity, natural gas, and maintenance bills, to be paid by the family, will be $700 per month if the house is occupied and zero otherwise. if the family wishes to minimize losses from being away, it should rent the house for as much as the market will bear, as long as the monthly rent is above which of the following? (assume wear and tear to be the same whether or not the house is occupied.) Juanitas Social Security full monthly retirement benefit is $2,128. She started collecting Social Security at age 65. Her benefit is reduced since she started collecting before age 67. Using the reduction percents from Example 1, find her approximate monthly Social Security benefit to the nearest dollar.EXAMPLE 1Marissa from Example 2. What will her monthly benefit be, since she did not wait until age 67 to receive full retirement benefits?SOLUTION Age 67 is considered to be full retirement age if you were born in 1945. If you start collecting Social Security before age 67, your full retirement benefit is reduced, according to the following schedule. If you start at collecting benefits at 62, the reduction is about 30%. If you start at collecting benefits at 63, the reduction is about 25%. If you start at collecting benefits at 64, the reduction is about 20%. If you start at collecting benefits at 65, the reduction is about 13.3%. If you start at collecting benefits at 66, the reduction is about 6.7%.Marissas full retirement benefit was $1,130.40. Since she retired at age 65, the benefit will be reduced about 13.3%.Find 13.3% of $1,130.40, and round to the nearest cent.0.133 x 1,130.40Subtract to find the benefit Marissa would receive.1,130.40 x 150.34Marissas benefit would be about $980.06.EXAMPLE 2Marissa reached age 62 in 2007. She did not retire until years later. Over her life, she earned an average of $2,300 per month after her earnings were adjusted for inflation. What is her Social Security full retirement benefit? Card 2 of 8Alg2.2.17 Practice 1Clare is planning a sailing trip. She finds an expression for time, T (s), in hours it takes her to sail 6 miles in terms of s, the speedof the current tailwind in miles per hour. This is the graph Clare gets if she allows s to take on any value between 0 and 10.a. What does the y-intercept tell you in this situation?Type your response in the space below. Solve the following equations graphically (a) .12x - 4y = 12 5) Is the following list of ordered pair afunction?{(-3,4),(-4,3),(-1,4)} What are the components of blood cell are called leukocytes? can someone please!!! THANK YOU PLEASE! What are the coordinates of the point on the directed line segment from (- 2, -2) to (9, 9) that partitions the segment into a ratio of 5 to 6? URGENT!!! Use the word bank please. NicaraguaTorovenadoartesanasbuen preciocarosdiecinuevelugar de los venadosvolcn de Masayadieciocholaguna de Masaya1. En el pueblo de Masaya hay muchas bellezas naturales. Ah est la laguna de Masaya una de las ms extensas deNicaraguaTambin est el volcn de Masaya que los indgenas de la regin veneraban en lapoca precolombina. En los ltimos quinientos aos, ste hizo erupcinveces. 2. El pueblo de Masaya es conocido por sus en el mercado se venden estos productos aEn este3. El nombre Masaya viene de las palabras indigenas "mazalt" y "yan", que significanpueblo se celebra elen el que se bailan danzas tradicionales Which of the following is NOT typically a standard psychoanalytic technique?a. Free associationb. Interpretationc. developing insight into how early experiences affected current aspects of a client's life analysis of transferenced. All of the above the mortality rates of children have gone down significantly in the past couple of decades.T/F acorporation issues bonds with detachable warrants. the amount to be recorded as paid-in capital is preferably _____a. equal to the market value of the warrants. b. based on the relative market values of the two securities. c. zero. d. calculated by the excess of the proceeds over the face amount of the bonds. critically evaluate hotel elegante distribution strategy, is it appropriate?. can you think of any other gds strategies which hotel elegante might embrace or should considering in light of emerging technologies? Consider a thin 30 m rod pivoted at one end. A uniform density spherical object (whose mass is 4 kg and radius is 3.3 m ) is attached to the free end of the rod and the moment of inertia of the rod about an end is I rod = 31mL 2and the moment of inertia of the sphere about its center of mass is I sphere= 52mr 2. What is the angular acceleration of the rod immediately after it is released from its initial position of 39 from the vertical? The acceleration of gravity g=9.8 m/s 2. Answer in units of rad/s 2. PLEASEE HELP ITS DUE TONIGHT!!!Find the area of the shaded region the healthcare provider prescribed maria an ssri, sertraline (zoloft) 50 mg. select the correct responses about ssris and postpartum depression a ball is dropped from rest from a tower and strikes the ground 122.5 m below. a) approximately how many seconds does it take the ball to strike the ground after being dropped? b) with what velocity does it strike the ground? neglect air resistance.